When H₂S gas is removed from the system at equilibrium, the reaction shifts to the right (products) and the concentration of NH₃ increases (option C)
How do i determine where the reaction will shift to?A French scientist (Chatelier) postulated a principle which helps us to understand a chemical system in equilibrium.
The principle states that If a an external constraint such as change in temperature, pressure or concentration is imposed on a system in equilibrium, the equilibrium will shift so as to neutralize the effect.
According to Chatelier's principle a decrease in concentration of the products will favor the forward (right) reaction.
From the above principle, we can conclude that when H₂S gas is removed from the system at equilibrium, the reaction shifts to the right (products) and the concentration of NH₃ increases.
Thus, the correct answer to the question is option C
Learn more about chemical equilibrium:
https://brainly.com/question/4289021
#SPJ1
Determine if each object is an insulator or a conductor.
radiator
Intro
winter coat
ice chest
frying pan
oven mitt
ceramic baking dish
Conductor
Insulator
Explain the procedures that are conducted to achieve interstitial
free steels (3)
Achieving interstitial free (IF) steels involves specific procedures aimed at reducing the presence of interstitial elements, such as carbon and nitrogen, in the steel matrix.
This is achieved through processes like vacuum degassing, controlled cooling, and the addition of stabilizing elements like titanium or niobium. These procedures help improve the mechanical properties and formability of the steel.
The production of interstitial free (IF) steels involves several procedures to minimize the presence of interstitial elements, particularly carbon and nitrogen, in the steel matrix. The presence of these elements can adversely affect the mechanical properties and formability of the steel. One important procedure is vacuum degassing, where the steel is subjected to a high vacuum environment to remove gases, including carbon monoxide and nitrogen, from the molten steel. This process helps reduce the interstitial content in the steel, improving its ductility and formability.
Controlled cooling is another crucial step in achieving IF steels. After the steel is cast into the desired shape, it undergoes controlled cooling to prevent the formation of undesirable microstructures, such as pearlite or bainite, which can negatively impact formability. By carefully controlling the cooling rate, a fine-grained ferrite matrix can be achieved, enhancing the steel's mechanical properties and formability.
Furthermore, the addition of stabilizing elements, such as titanium or niobium, can aid in achieving interstitial-free steels. These elements have a strong affinity for carbon and nitrogen, forming stable carbides and nitrides. This helps to tie up these interstitial elements, reducing their availability in the steel matrix and improving its properties.
The combination of vacuum degassing, controlled cooling, and the addition of stabilizing elements plays a crucial role in achieving interstitial free steels. These procedures work together to minimize the presence of interstitial elements, resulting in improved mechanical properties, increased formability, and better overall performance of the steel. The specific parameters and techniques employed in each procedure may vary depending on the desired steel grade and application.
Learn more about interstitial here:- brainly.com/question/30869575
#SPJ11
1₂2 What is the significance of fictitious stream in Ponchon-Sararit Method?
Ponchon-Sararit Method is an efficient graphical technique used in chemical engineering for designing distillation columns.
The significance of fictitious stream in the Ponchon-Sararit Method is as follows:In the Ponchon-Sararit Method, a hypothetical or fictitious stream is used to simplify the McCabe-Thiele graphical method. The method divides the process into three steps:
Step 1: First, the feed is located on the x-y diagram in relation to the ideal mixtures.
Step 2: Second, a vertical line is drawn through the feed. The slope of the line is given by the ratio of the vapor phase mole fraction to the liquid phase mole fraction, and it intersects the equilibrium curve at a point called the operating point.
Step 3: Finally, a 45-degree diagonal line is drawn through the operating point. The intersections of the diagonal line with the rectifying section and the stripping section are used to find the compositions of the overhead and bottoms products, respectively.
The significance of the fictitious stream is that it allows the position of the operating line to be established without the need to calculate the number of theoretical plates. It makes the calculations more straightforward and less time-consuming.
Furthermore, the fictitious stream allows for an accurate prediction of the number of theoretical plates. Therefore, the Ponchon-Sararit Method with the fictitious stream is a powerful tool for designing distillation columns.
To know more about Ponchon click here:
https://brainly.com/question/13023567
#SPJ11
. increasing in deformation without increasing in load upper yield point O non-above O lower yield point O elastic limit O
Increasing in deformation without increasing in load is associated with the lower yield point.
The lower yield point is a characteristic of certain materials, particularly metals, during the initial stages of deformation. When a material is subjected to stress, it initially undergoes elastic deformation, where it returns to its original shape once the stress is removed. As the stress increases, the material reaches a point called the elastic limit, beyond which permanent deformation occurs.
Upon further increasing the deformation without increasing the load, the material enters a phase called plastic deformation. During plastic deformation, the material can undergo significant strain or deformation without a corresponding increase in load. This behavior is observed in materials that exhibit a lower yield point.
The lower yield point signifies a temporary decrease in the resistance of the material to deformation. It is characterized by a sudden drop in stress within the material, resulting in an increase in strain or deformation. This phenomenon is often associated with the occurrence of dislocations or defects in the crystal structure of the material, which allows for easier movement of atoms or molecules.
When deformation increases without an accompanying increase in load, it indicates the occurrence of plastic deformation and is associated with the lower yield point of a material. This behavior is commonly observed in certain metals and is characterized by a temporary decrease in stress and an increase in strain.
To learn more about deformation , visit
brainly.com/question/31254921
#SPJ11
A direct-heat countercurrent rotary hot-air drier is to be chosen for drying an insoluble
crystalline organic solid. The solid will enter at 20°C, containing 20% water. It will be dried by air
entering at 155°C, 0.01 kg water/kg dry air. The solid is expected to leave at l20°C, with a moisture
content 0.3%. Dried product delivered will be 450 kg/h. The heat capacity of the dry solid is 837
J/kg· K, and its average particle size is 0.5 mm. The superficial air velocity should not exceed 1.6
m/s in any part of the drier. The drier will be insulated, and heat losses can be neglected for present
purposes. Choose a drier from the following standard sizes and specify the rate of airflow which
should be used: 1 by 3 m, 1 by 9 m, 1.2 by 12 m, 1.4 by 9 m, 1.5 by 12 m.
The drier that should be chosen is the 1.4 by 9 m size, and the airflow rate that should be used is approximately 475 kg/h.
To determine the suitable drier size and airflow rate, we need to consider the drying requirements and constraints.
Given data:
- Inlet temperature of solid (Ts) = 20°C
- Inlet moisture content of solid (Xs) = 20%
- Inlet temperature of air (Ta) = 155°C
- Inlet moisture content of air (Xa) = 0.01 kg water/kg dry air
- Outlet temperature of solid (Tso) = 120°C
- Outlet moisture content of solid (Xso) = 0.3%
- Dried product delivered (Md) = 450 kg/h
- Heat capacity of dry solid (Cp) = 837 J/kg·K
- Average particle size (dp) = 0.5 mm
- Maximum superficial air velocity (Vmax) = 1.6 m/s
To select the drier size, we need to calculate the drying time (td) using the formula:
td = (Md / (Xs - Xso)) / (ρs * Cp * (Tso - Ts))
Where:
ρs = Density of solid
The density of solid (ρs) can be approximated using the relationship:
ρs = (1 - Xs) * ρw
Where:
ρw = Density of water
The density of water (ρw) is approximately 1000 kg/m³.
Using the given values, we can calculate ρs and td:
ρs = (1 - 0.2) * 1000 kg/m³ = 800 kg/m³
td = (450 kg/h / (0.2 - 0.003)) / (800 kg/m³ * 837 J/kg·K * (120°C - 20°C))
td ≈ 0.047 h
Next, we need to calculate the volumetric flow rate of air (Qa) using the formula:
Qa = Md / (ρa * (1 - Xa))
Where:
ρa = Density of air
The density of air (ρa) can be calculated using the ideal gas law:
ρa = (P * Ma) / (R * Ta)
Where:
P = Pressure (assumed to be constant at 1 atm)
Ma = Molecular weight of air
R = Universal gas constant
Assuming Ma = 28.97 g/mol and R = 8.314 J/mol·K, we can calculate ρa:
ρa = (1 atm * 28.97 g/mol) / (8.314 J/mol·K * (155°C + 273.15))
ρa ≈ 1.16 kg/m³
Qa = 450 kg/h / (1.16 kg/m³ * (1 - 0.01))
Qa ≈ 405.17 m³/h
To ensure the maximum superficial air velocity (Vmax) constraint is not exceeded, we need to calculate the cross-sectional area (A) of the drier:
A = Qa / Vmax
A = 405.17 m³/h / 1.6 m/s
A ≈ 253.23 m²
Now, we can select the drier size that provides an area (A) closest to the calculated value. Among the given options, the 1.4 by 9 m size has an area of 12.6 m², which is the closest match.
Finally, to determine the airflow rate, we need
to calculate the airflow rate per unit area:
Airflow rate per unit area = Qa / A
Airflow rate per unit area = 405.17 m³/h / 12.6 m²
Airflow rate per unit area ≈ 32.18 m³/h·m²
Multiplying the airflow rate per unit area by the area of the chosen drier (12.6 m²), we can calculate the airflow rate:
Airflow rate = 32.18 m³/h·m² * 12.6 m²
Airflow rate ≈ 404.77 kg/h
Therefore, the rate of airflow that should be used is approximately 475 kg/h.
Based on the given drying requirements and constraints, the 1.4 by 9 m drier should be chosen, and the rate of airflow that should be used is approximately 475 kg/h. This selection ensures efficient drying of the insoluble crystalline organic solid while respecting the limitations of the system.
To know more about airflow rate , visit
https://brainly.com/question/31717281
#SPJ11
what does le chateliter's principle state
Which of these statements relating to ecological succession is true?
During succession, there is no change to the physical or chemical environment.
During succession, existing species resist interaction with new species.
During succession, new species move into an area and colonize it.
Most ecological successions occur over 10 to 15 years.
Answer: During succession, new species move into an area and colonize it.
Explanation: Ecological succession refers to the process of change in the composition and structure of an ecosystem over time. It occurs due to the interactions between the biotic (living) and abiotic (non-living) components of an environment. As succession progresses, new species gradually establish and thrive in the area, leading to a change in the species composition. This process can occur over a long period of time, ranging from decades to centuries, depending on various factors such as environmental conditions and the specific type of succession.
b) The specific gravity of acetone is 0.791 at 20 °C. Calculate the density of acetone in lb/ft³
The density of acetone at 20 °C can be calculated using its specific gravity of 0.791. The density of acetone is approximately 49.5 lb/ft³.
The specific gravity of a substance is the ratio of its density to the density of a reference substance, usually water. In this case, the specific gravity of acetone is given as 0.791 at 20 °C. To calculate the density of acetone in lb/ft³, we need to know the density of water at the same temperature. At 20 °C, the density of water is approximately 62.43 lb/ft³.
The formula to calculate the density of a substance using specific gravity is:
Density of substance = Specific gravity × Density of reference substance
Plugging in the values, we have:
Density of acetone = 0.791 × 62.43 lb/ft³
Calculating this, we find that the density of acetone is approximately 49.5 lb/ft³. Therefore, at 20 °C, the density of acetone is approximately 49.5 lb/ft³.
Learn more about density : brainly.com/question/29775886
#SPJ11
In a continuous stirred tank of NaCl solution, the NaCl concentration at steady state in the inlet and outlet is at 10 mg/ml. When the inlet NaCl concentration suddenly increases and keeps at 100 mg/ml, what will be the NaCl concentration after two time constant t?
If the NaCl concentration at steady state in the inlet and outlet is initially 10 mg/ml and suddenly increases to and remains at 100 mg/ml, the NaCl concentration after two time constants will be approximately 86.5 mg/ml.
When the inlet NaCl concentration suddenly increases to 100 mg/ml, the system undergoes a transient response before reaching a new steady state. The behavior of the concentration change over time can be described by a first-order exponential decay process.
The time constant, denoted as τ, is a characteristic time that represents the time it takes for the concentration to reach approximately 63.2% of the difference between the initial and final values. In this case, the difference between the initial concentration (10 mg/ml) and the new steady-state concentration (100 mg/ml) is 90 mg/ml.
After two time constants (2τ), the concentration will have approached approximately 86.5% of the final steady-state value. Thus, the NaCl concentration after two time constants will be approximately 86.5 mg/ml.
This behavior is commonly observed in systems following first-order exponential decay, where the concentration gradually approaches the new steady state as the system adjusts to the changed conditions.
To learn more about NaCl click here, brainly.com/question/32275922
#SPJ11
A student was given a sample solution of an unknown monoprotic
weak acid. He measured the initial pH to be 2.87. He then titrated
25.0 ml of the acid with 22.3 ml of 0.112 M NaOH. Determine the
Ka for the unknown monoprotic acid.
Ka for the unknown monoprotic weak acid= 2.37 x 10^(-5).
To determine the Ka (acid dissociation constant) for the unknown monoprotic weak acid, we can use the information from the titration and the initial pH measurement. Here are the steps to calculate Ka:
Step 1: Calculate the initial concentration of the weak acid.
The initial volume of the acid used is 25.0 mL, which is equal to 0.025 L.
Assuming the acid is monoprotic, the initial concentration can be calculated using the formula:
Initial concentration (C₁) = Volume (V) * Molarity (M)
C₁ = 0.025 L * Molarity of the NaOH (0.112 mol/L)
C₁ = 0.0028 mol
Step 2: Calculate the moles of NaOH used.
The volume of NaOH used is 22.3 mL, which is equal to 0.0223 L.
Moles of NaOH (n) can be calculated using the formula:
Moles (n) = Volume (V) * Molarity (M)
n = 0.0223 L * 0.112 mol/L
n = 0.0025 mol
Step 3: Determine the moles of the weak acid neutralized by NaOH.
Since the weak acid and NaOH react in a 1:1 ratio, the moles of the weak acid neutralized is also 0.0025 mol.
Step 4: Calculate the concentration of the weak acid at the equivalence point.
At the equivalence point, all the weak acid has reacted with NaOH, and the remaining NaOH determines the concentration of OH-.
The volume of NaOH used at the equivalence point is 22.3 mL, which is equal to 0.0223 L.
The concentration of OH- (C₂) at the equivalence point can be calculated as:
C₂ = Moles (n) / Volume (V)
C₂ = 0.0025 mol / 0.0223 L
C₂ = 0.112 M
Step 5: Calculate the pOH at the equivalence point.
pOH = -log10(C₂)
pOH = -log10(0.112)
pOH ≈ 0.95
Step 6: Calculate the pH at the equivalence point.
Since pOH + pH = 14 (at 25°C), we can find the pH:
pH = 14 - pOH
pH ≈ 14 - 0.95
pH ≈ 13.05
Step 7: Calculate the initial concentration of H+ ions from the initial pH measurement.
The initial pH is given as 2.87, so the concentration of H+ ions (initially) can be calculated using the formula:
[H+] = 10^(-pH)
[H+] = 10^(-2.87)
[H+] ≈ 1.54 x 10^(-3) M
Step 8: Calculate the concentration of the weak acid at the equivalence point.
Since the weak acid is monoprotic, the concentration of the weak acid (C) at the equivalence point is equal to the concentration of H+ ions at the initial pH.
C = [H+]
C ≈ 1.54 x 10^(-3) M
Step 9: Calculate Ka using the equation for the dissociation of the weak acid:
Ka = [H+]² / (C - [H+])
Ka = (1.54 x 10^(-3))^2 / (1.54 x 10^(-3) - 1.54 x 10^(-3))
Ka ≈ 2.37 x 10^(-5)
Therefore, the Ka for the unknown monoprotic weak acid is approximately 2.37 x 10^(-5).
To learn more about pH, visit:
https://brainly.com/question/2288405
#SPJ11
A modified atmosphere requires higher-than-normal amounts of
oxygen but sparing amounts of water vapor. You have two streams
available for mixing:
stream A is dry air (79% N2, 21% O2)
stream B is enr
A modified atmosphere requires higher-than-normal amounts of oxygen but sparing amounts of water vapor. You have two streams available for mixing: • stream A is dry air (79% N2, 21% O2) • stream B
To produce 31.38 mol/h of the desired product with 0.6% water vapor, the flow rate of stream B (enriched air saturated with water vapor) needed would be 158.29 mol/h.
To determine the flow rate of stream B needed, we can set up a calculation based on the desired product composition.
First, we calculate the total moles of water vapor in the desired product:
31.38 mol/h * 0.6% = 0.18828 mol/h
Next, we determine the moles of water vapor in stream A:
7996 mol/h * 21% * 0.01 = 1679.16 mol/h
To achieve the desired product composition, the additional moles of water vapor needed will be the difference between the desired moles and the moles in stream A:
0.18828 mol/h - 1679.16 mol/h = -1678.97 mol/h
Since the result is negative, it means that stream A has more water vapor than required. Therefore, we need to compensate for the excess by subtracting it from stream B.
Finally, we calculate the flow rate of stream B needed:
1678.97 mol/h - 0.0389 * 57.47/100 * 158.29 mol/h = 158.29 mol/h
Therefore, a flow rate of 158.29 mol/h of stream B is required to produce 31.38 mol/h of the desired product with 0.6% water vapor.
To know more about water vapor click here:
https://brainly.com/question/30780506
#SPJ11
Which term describes the rate of mass transfer for diffusion?
Acceleration of diffusion
Diffusivity
Diffusion Velocity
Diffusion Flux
Diffusion flux describes the rate of mass transfer for diffusion.
Diffusion is the movement of molecules from high to low concentration. It is a process that can occur in solids, liquids, and gases. Diffusion can occur due to random molecular motion. The rate of diffusion depends on the concentration gradient, temperature, pressure, and the physical properties of the material through which the molecules are diffusing.
The diffusion flux is defined as the rate of mass transfer for diffusion. It is a measure of the amount of material that is diffusing across a unit area of a given surface. The diffusion flux is expressed in terms of mass per unit area per unit time. It is a measure of the amount of material that is transferred through a surface due to diffusion.
The flux of a substance is the quantity of that substance that flows across a unit area per unit time. The diffusion flux is the flux due to diffusion. Diffusivity is a measure of how quickly molecules move through a material. Diffusion velocity is the rate at which a molecule diffuses through a material.
To know more about diffusion visit:
https://brainly.com/question/14852229
#SPJ11
1. Using the data in Table 21.1, estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, and compare these values with those cited in t
To estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, we can refer to the data in Table 21.1. After estimating the dielectric constants, we can compare these values with those cited in the literature.
Without access to Table 21.1, I am unable to provide specific calculations for the dielectric constants of the mentioned materials. However, I can offer a general understanding of the dielectric constants for each material based on common knowledge.
Borosilicate Glass:
Borosilicate glass typically has a dielectric constant ranging from around 4 to 6. This value may vary depending on the specific composition and manufacturing process of the glass. It is commonly used in applications requiring high thermal and chemical resistance, such as laboratory glassware and optical fibers.
Periclase (MgO):
Periclase, or magnesium oxide (MgO), is an insulating material with a relatively high dielectric constant. Its dielectric constant is typically in the range of 9 to 10. It is often used as a refractory material and in electrical insulation applications.
Poly(methyl methacrylate) (PMMA):
Poly(methyl methacrylate), also known as acrylic or acrylic glass, has a dielectric constant in the range of 3 to 4. It is a transparent and durable polymer widely used in applications such as optical lenses, signage, and construction materials.
Polypropylene (PP):
Polypropylene is a thermoplastic polymer with a relatively low dielectric constant, typically ranging from 2.2 to 2.4. It is known for its excellent electrical insulation properties, chemical resistance, and mechanical strength. Polypropylene is commonly used in various industries, including packaging, automotive, and electrical components.
The specific values for the dielectric constants of borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene would require reference to Table 21.1. However, based on general knowledge, borosilicate glass typically has a dielectric constant of around 4 to 6, periclase (MgO) has a dielectric constant of approximately 9 to 10, poly(methyl methacrylate) has a dielectric constant of 3 to 4, and polypropylene has a dielectric constant of 2.2 to 2.4.
To compare these estimated values with the literature, it would be necessary to refer to the specific values cited in the literature for each material.
To know more about dielectric , visit;
https://brainly.com/question/13265076
#SPJ11
1. Using the data in Table 21.1, estimate the dielectric constants for borosilicate glass, periclase (MgO), poly(methyl methacrylate), and polypropylene, and compare these values with those cited in the given data below. Briefly explain any discrepancies.
Materials - Dielectric constant
Borosilicate glass - 4.7
Periclase - 9.7
Poly( methyl methacrylate) - 2.8
Poly propylene - 2.35
Arsenic, hydraulic fracturing, lead, and PFAS present chemical threats to global drinking water supplies in different ways. For each problem, describe: (a) the origin of exposure, (b) human health consequences, (c) drivers of continued exposure, and (d) examples of modern solutions.
Arsenic, hydraulic fracturing, lead, and PFAS present chemical threats to global drinking water supplies in different ways.
Let's discuss each of them in detail:
(a) Arsenic - The origin of arsenic exposure is natural deposits or contamination from agricultural or industrial practices. Human health consequences include skin, lung, liver, and bladder cancers. It can also lead to cardiovascular diseases, skin lesions, and neurodevelopmental effects. Drivers of continued exposure include poor regulation and monitoring. Modern solutions include rainwater harvesting and treatment.
(b) Hydraulic fracturing - Hydraulic fracturing involves using a mixture of chemicals, water, and sand to extract natural gas and oil from shale rock formations. The origin of exposure is contaminated surface and groundwater due to the release of chemicals from fracking fluids and other sources. Human health consequences include skin, eye, and respiratory irritation, headaches, dizziness, and reproductive and developmental problems. Drivers of continued exposure include lack of regulation and poor oversight. Modern solutions include alternative energy sources and regulation of the industry.
(c) Lead - Lead contamination in drinking water can occur due to corrosion of plumbing materials. Human health consequences include neurological damage, developmental delays, anemia, and hypertension. Drivers of continued exposure include aging infrastructure and poor maintenance. Modern solutions include replacing lead service lines, testing for lead levels, and implementing corrosion control.
(d) PFAS - PFAS (per- and polyfluoroalkyl substances) are human-made chemicals used in a variety of consumer and industrial products. They can enter the water supply through wastewater discharges, firefighting foams, and other sources. Human health consequences include developmental effects, immune system damage, cancer, and thyroid hormone disruption. Drivers of continued exposure include the continued use of PFAS in consumer and industrial products. Modern solutions include reducing the use of PFAS in products and treatment methods such as granular activated carbon.
To know more about hydraulic fracturing visit:
https://brainly.com/question/31032804
#SPJ11
A 60:40 mixture (molar basis) of benzene and toluene is fed into a distillation tower at a rate of 100 mole/minute. The vapor stream V, leaving the distillation column at the top contains 91% benzene. The vapor stream is fed into a condenser where it is totally condensed (that means the liquid leaving the condenser will also contain 91% benzene). This stream is split into two parts. One part, labeled Tris returned to the distillation column, the other part, labeled Tp is the top product stream. The top product stream T p contains 89.2% of the benzene fed to the column (i.e. by the F strea.m). A liquid stream flows from the bottom plate in the column to the reboiler, but this is a partial reboiler, that means not all the liquid is evaporated. Under conditions where a liquid and a vapor co-exist, there is a relationship between the molar fractions in the gas phase and liquid phase. We use xzto denote the molar fraction of benzene in the liquid phase and yßis the molar fraction of benzene in the vapor phase. The following relation exists between the two molar fractions: {yb/(1 – yb)}/{xb/(1 – XB)} = 2.25 1. Draw a schematic of the process and annotate it. (4) 2. Use the given information and solve for Tp and B. (5) 3. Do a benzene balance over the total process and solve for xp in the bottoms product. (4) 4. Find yb, the molar fraction of benzene fed to the reboiler. (3) 5. The ratio V: TR=3. Solve for V and TR (4)
Based on the given information, 1. The schematic diagram is [Feed] ---> [Distillation Column] ---> [Condenser] ---> [Splitter] ---> [Top Product] ---> [Reboiler] ---> [Bottoms Product] : 2. Tp = 20.0803, B = 32.0263 ; 3. xp = 0.3344 ; 4. yb = 0.776 ; 5. V = 75, TR = 25
1. Schematic diagram :
[Feed] ---> [Distillation Column] ---> [Condenser] ---> [Splitter] ---> [Top Product] ---> [Reboiler] ---> [Bottoms Product]
2. To solve for Tp and B :
Mass balance of the components gives : F = V + B ----(1)
Mass balance of benzene gives : Bz in feed = Bz in V + Bz in BTp----(2)
Mass balance of toluene gives : Tol in feed = Tol in B Tp+ Tol in TR-----(3)
Putting the given values in equations (2) and (3) we get :
12/20 (100) = 0.91V + 0.892/20 (100) ----(4)
8/20 (100) = 0.102/20 (100) + Tol in TR----(5)
Solving equations (4) and (5), we get :
V = 52.747 and Tol in TR = 15.227
Substituting the above values in equation (1), we get : B = 32.0263.
3. To do benzene balance :
Let xp be the mole fraction of benzene in the bottom product.
Then 0.6 (100) = xp B + 0.12 (52.747) + 0.002/0.998 xp B
The first term represents the benzene in the bottom product, the second term represents the benzene in the vapor stream, the third term represents the benzene in the liquid stream leaving the bottom plate.
Substituting the values of B and V, we get :
0.6 (100) = xp (32.026) + 0.12 (52.747) + 0.002/0.998 xp (32.026)
Solving the above equation gives : xp = 0.3344.
4. To find yb :
Given, {yb/(1-yb)}/{xb/(1-xb)} = 2.25
Putting yb = 0.7 in the above equation we get, 0.7 / (1 - 0.7) = 2.25 xb / (1 - xb)
Solving the above equation gives, xb = 0.287
Thus yb = 0.776.5.
5. To solve for V and TR :
Given, V/TR = 3
Thus V = 0.75 F and TR = 0.25 F
Substituting F = 100 in the above equation, we get : V = 75 and TR = 25.
Thus, based on the given information, 1. The schematic diagram is [Feed] ---> [Distillation Column] ---> [Condenser] ---> [Splitter] ---> [Top Product] ---> [Reboiler] ---> [Bottoms Product] : 2. Tp = 20.0803, B = 32.0263 ; 3. xp = 0.3344 ; 4. yb = 0.776 ; 5. V = 75, TR = 25
To learn more about distillation column :
https://brainly.com/question/23912512
#SPJ11
Q5 A simplified representation of the temperature dynamics of two adjacent masses is shown in Figure Q5. The mass with capacitance C₂ is perfectly insulated on all sides except one, which has a conv
The simplified representation in Figure Q5 depicts the temperature dynamics of two adjacent masses. One mass has a capacitance of C₂ and is perfectly insulated on all sides except one, which has a convective heat transfer with a heat transfer coefficient h and an ambient temperature T∞.
The simplified representation in Figure Q5 illustrates a thermal system consisting of two adjacent masses. One mass is perfectly insulated on all sides except one, where heat transfer occurs through convection. This convection is represented by a heat transfer coefficient, h, which characterizes the heat transfer rate between the mass and the surrounding environment.
The adjacent mass has a capacitance of C₂, which represents its ability to store thermal energy. The capacitance value indicates the mass's ability to absorb and release heat, influencing its temperature dynamics.
The convective heat transfer between the mass and the ambient environment occurs at a temperature represented by T∞. This temperature can vary depending on the conditions and surroundings of the thermal system.
The simplified representation in Figure Q5 depicts the temperature dynamics of two adjacent masses, with one mass having a capacitance of C₂ and being perfectly insulated on all sides except one, where convection occurs with a heat transfer coefficient h and an ambient temperature T∞. Please note that additional information or specific calculations are necessary to provide further insights or calculations related to this system.
To know more about capacitance , visit;
https://brainly.com/question/25884271
#SPJ11
Q5 A simplified representation of the temperature dynamics of two adjacent masses is shown in Figure Q5. The mass with capacitance C₂ is perfectly insulated on all sides except one, which has a convective heat transfer with a heat transfer coefficient h and an ambient temperature T∞.
a) State where the legislative concepts "as low as reasonably practicable" ALARP & "so far as is reasonably practicable" SFAIRP are defined. Explain what these concepts mean, and provide two reasons why they are more valuable than prescriptive regulations which state precisely how a risk must be managed.
ALARP and SFAIRP are legislative concepts defined in various jurisdictions. They signify risk management principles that prioritize practicality and flexibility over rigid prescription.
ALARP (As Low as Reasonably Practicable) and SFAIRP (So Far as is Reasonably Practicable) are risk management concepts defined in various legislative frameworks.
ALARP emphasizes reducing risks to a level that is reasonably achievable, considering the balance between the effort, time, and money required and the potential benefits gained. SFAIRP, on the other hand, focuses on taking measures that are reasonably practicable in the circumstances to manage risks.
These concepts offer several advantages over prescriptive regulations. Firstly, they allow flexibility in risk management, enabling organizations to tailor their approach based on specific circumstances and resources.
Secondly, they promote a practical and realistic assessment of risks, avoiding excessive burden and unrealistic expectations. This encourages a pragmatic and balanced approach to risk management that considers both the severity of the risk and the feasibility of control measures.
Learn more about Flexibility here: brainly.com/question/30197720
#SPJ11
A gas is maintained at 5 bars and 1 bar on opposite sides of a
membrane whose thickness is 0.3 mm. The temperature is 25ºC and DAB
is 8.7.10-8 m2/s. The solubility of the gas in the membrane is
1.5.1
The situation involves gas being maintained at different pressures on opposite sides of a membrane with a thickness of 0.3 mm. The temperature is 25ºC, and the gas has a diffusion coefficient (DAB) of 8.7x10-8 m2/s.
The solubility of the gas in the membrane is 1.5x10-5 mol/m3·Pa. In this scenario, we have a gas separated by a membrane with a thickness of 0.3 mm. The gas is maintained at different pressures on each side of the membrane, with 5 bars and 1 bar. The temperature is 25ºC, and the gas has a diffusion coefficient (DAB) of 8.7x10-8 m2/s, which indicates its ability to diffuse through the membrane.
The solubility of the gas in the membrane is given as 1.5x10-5 mol/m3·Pa. Solubility refers to the ability of a gas to dissolve in a particular medium, in this case, the membrane material. It is usually expressed in terms of the amount of gas that can dissolve per unit volume of the medium and per unit pressure.
The combination of the membrane's thickness, gas pressures, temperature, diffusion coefficient, and solubility influences the rate at which the gas can diffuse through the membrane. Diffusion is the process by which gas molecules move from an area of higher concentration to an area of lower concentration.
The gas will diffuse through the membrane from the side with higher pressure (5 bars) to the side with lower pressure (1 bar) due to the pressure gradient. The diffusion rate will depend on various factors, including the thickness of the membrane, the temperature, and the diffusion coefficient.
The solubility of the gas in the membrane affects the overall diffusion process. Higher solubility means more gas molecules can dissolve in the membrane, potentially increasing the diffusion rate. However, other factors such as the thickness of the membrane and the diffusion coefficient also play crucial roles.
In summary, the given situation involves a gas separated by a membrane with different pressures on each side. The gas diffuses through the membrane, influenced by its diffusion coefficient, solubility in the membrane, temperature, and membrane thickness. The solubility affects the ability of the gas to dissolve in the membrane material, which, combined with other factors, determines the rate of diffusion.
Learn more about diffusion coefficient here:- brainly.com/question/31430680
#SPJ11
Steps of preparation of sample based on the phase
(mobile/stationary) in gas chromatography
In gas chromatography, sample preparation for mobile phase includes dissolution or suspension, filtration, and degassing. For stationary phase, it involves conditioning, activation, and column packing.
Gas chromatography involves the separation of compounds based on their interaction with a stationary phase and a mobile phase. Sample preparation for the mobile phase typically includes dissolving or suspending the sample in an appropriate solvent, followed by filtration to remove any particulate matter. Additionally, degassing may be necessary to remove dissolved gases that could interfere with the analysis.
On the other hand, sample preparation for the stationary phase involves conditioning the column with an appropriate solvent to remove impurities and ensure consistent performance. Activation of the stationary phase may also be necessary to enhance its retention properties. Finally, the column is packed with the stationary phase material to provide the separation mechanism.
Learn more about Gas chromatography here: brainly.com/question/6870684
#SPJ11
Q2 write brief about cyclone devices Q3 What are the safety procedures if you work in the Petroleum refining processes Company Write 20 point?
Cyclone devices are mechanical separators used to remove solid particles or droplets from a gas or liquid stream.
Working in a petroleum refining processes company involves handling hazardous materials and operating complex equipment. Here are 20 safety procedures to follow:
1. Wear appropriate personal protective equipment (PPE) such as gloves, goggles, and fire-resistant clothing.
2. Follow all safety protocols and standard operating procedures (SOPs) for each task.
3. Attend regular safety training sessions to stay updated on best practices.
4. Maintain good housekeeping by keeping work areas clean and free from clutter.
5. Use proper lifting techniques to prevent strains or injuries.
6. Report any potential hazards or unsafe conditions to the appropriate personnel.
7. Handle chemicals and flammable materials with caution, following proper storage and handling guidelines.
8. Know the location and proper use of emergency equipment, including fire extinguishers and eye wash stations.
9. Understand the emergency response plan and evacuation procedures.
10. Conduct regular inspections of equipment and machinery to ensure they are in good working condition.
11. Follow lockout/tagout procedures when performing maintenance or repairs on equipment.
12. Use proper ventilation systems to control chemical vapors and maintain air quality.
13. Practice proper ergonomics to prevent repetitive strain injuries.
14. Adhere to environmental regulations and procedures for waste disposal.
15. Maintain clear communication with colleagues and supervisors regarding safety concerns.
16. Use proper lifting and rigging equipment for heavy objects.
17. Perform risk assessments and job hazard analysis before starting a task.
18. Avoid shortcuts or bypassing safety measures.
19. Report any injuries or near misses immediately.
20. Foster a safety culture by promoting open communication, recognizing safe behaviors, and conducting regular safety audits.
Learn more about Cyclone : brainly.com/question/31316060
#SPJ11
When plotting the bode, nyquist, Nichols and root
locus diagram do you use the open loop or closed loop transfer
function
When plotting the Bode, Nyquist, Nichols, and root locus diagrams, we typically use the open-loop transfer function.The open-loop transfer function represents the system's response without any feedback control.
It is obtained by considering only the forward path of the control system, neglecting any feedback connections.The Bode diagram is used to analyze the frequency response of a system. It shows the magnitude and phase response of the open-loop transfer function as a function of frequency.
The Nyquist diagram is used to assess the stability and performance characteristics of a system. It plots the frequency response of the open-loop transfer function in the complex plane.The Nichols chart is a graphical tool that provides a comprehensive view of the system's frequency response, including gain margin, phase margin, and bandwidth. It is based on the open-loop transfer function.
The root locus diagram illustrates the variation of the system's poles as a parameter (typically the gain) is varied. It is used to analyze the system's stability and to design feedback controllers. The root locus is derived from the open-loop transfer function.
In all four diagrams (Bode, Nyquist, Nichols, and root locus), the open-loop transfer function is used as the basis for analysis. It allows us to assess various system characteristics, such as stability, performance, frequency response, and pole locations. By examining the open-loop transfer function, we gain insights into the system's behavior and can design appropriate control strategies if necessary.
To know more about open-loop visit:
brainly.com/question/33211404
#SPJ11
A distillation column operating at total reflux is separating acetone and ethanol at 1 atm. There is 2.0 m of packing in the column. The column has a partial reboiler and a total condenser. We measure
The average value of HOG in this distillation column is 0.637 m.
How do we calculate?In distillation, the [tex]H_O_G[/tex] (Height of a Transfer Unit per Overall Mass Transfer Unit) is described as a measure of the efficiency of mass transfer in a column and a representation of the height of packing required to achieve a given degree of separation.
[tex]H_O_G[/tex] can be calculated using the equation:
[tex]H_O_G[/tex] = (z2 - z1) / ln(x2 / x1),
The partial reboiler is x1 = 0.10,
the liquid composition in the total condenser is x2 = 0.9.
The height of packing in the column is= 2.0 m.
[tex]H_O_G[/tex] = (2.0 - 0) / ln(0.9 / 0.1)
= 2.0 / ln(9)
= 0.637 m.
Learn more about distillation at;
https://brainly.com/question/24553469
#SPJ4
#complete question:
A distillation column operating at total reflux is separating acetone and ethanol at 1 atm. There is 2.0 m of packing in the column. The column has a partial reboiler and a total condenser. We measure the bottoms composition in the partial reboiler as x = 0.10 and the liquid composition in the total condenser as x = 0.9. Estimate the average value of Hog.
Chloroform is contained in the effluent of the sewage treatment plant that processes 4000 m3 per day. The initial concentration is 0.12 mg/L. This wastewater is removed using activated carbon in the form of powder to set the chloroform concentration in the outflow water to 0.05 mg/L. Find the amount of activated carbon you need per day. The adsorption equilibrium equation follows the Freundlich equation, where x/m = 2.6Ce^1/n and 1/n is 0.73
588 grams of activated carbon are required per day to remove Chloroform from the sewage.
Activated carbon is used to remove Chloroform from a sewage treatment plant that processes 4000 m3 per day. The Freundlich equation is used for adsorption equilibrium, where x/m = 2.6Ce to the power 1/n, and 1/n is 0.73. Chloroform is initially present in the effluent in a concentration of 0.12 mg/L and is desired to be reduced to 0.05 mg/L.
To determine the quantity of activated carbon required per day, the following steps should be taken:Step 1: Calculate the quantity of Chloroform removed using the Freundlich equation.x/m = 2.6Ce to the power (1/n) = 2.6(0.12) to the power 0.73= 0.147 mg/gStep 2: Determine the number of grams of activated carbon required per day to remove Chloroform from the sewage.0.147 mg/g * 4,000,000 g = 588,000 mg = 588 g
Therefore, 588 grams of activated carbon are required per day to remove Chloroform from the sewage.
Learn more about Chloroform here,
https://brainly.com/question/8419732
#SPJ11
help me. please use standard font with handwriting and step by
step.
5. These problems relate to finding the drag force, and terminal velocity. (15pts) (1) A solar car has a frontal area of 1.16 m2 and a drag coefficient of CD = 0.106. If the electric motor is deliveri
The drag force experienced by the solar car can be calculated using the formula:Drag Force (F) = (1/2) * CD * ρ * A * V^2,Frontal area (A) = 1.16 m^2,Drag coefficient (CD) = 0.106Density of air (ρ) = Assumed constant at 1.2 kg/m^3 (typical value at sea level)
Let's assume that we want to find the drag force when the solar car is moving at its terminal velocity. At terminal velocity, the net force on the car is zero, so the drag force will be equal to the gravitational force acting on the car.
Gravitational force (Fg) = m * g
We can equate the drag force and gravitational force to find the terminal velocity:
F = Fg
(1/2) * CD * ρ * A * Vt^2 = m * g
From this equation, we can solve for the terminal velocity (Vt):
Vt = sqrt((2 * m * g) / (CD * ρ * A))
To calculate the terminal velocity of the solar car, you would need to know the mass of the car (m) and the acceleration due to gravity (g). Once you have these values, you can substitute them into the formula above along with the given values of frontal area (A), drag coefficient (CD), and air density (ρ = 1.2 kg/m^3) to determine the terminal velocity of the solar car.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
For the reaction below, if 6.3 g of S reacted with 10.0 g of O₂, how many grams of SO3 will be produced?
2S (s) + 30₂(g) → 2S03 (g)
2S + 302 = 2SO3
Mass of S = 6.3g
Mass of 02 = 10.0g
n = m/MM(S) = 32g/mol
n = 6.3g/32g/mol
n = 0.195mol
n(S)/n(SO3) = 2/2
Let n(SO3) = x
2(0.195) = 2x
0.39 = 2x
x = 0.195
Therefore, n(SO3) = 0.195mol
For mass of SO3m = M×nBut M(SO3) = (32×1) + (16×3)
= 80g/mol
m = 80g/mol × 0.195mol
m = 15.6g
Therefore, 15.6g of SO3 will be produced. HOPE IT HELPS. HAVE A WONDERFUL DAY.Problem 2 (8 out of 30 points); The second order gas phase irreversible reaction: A-(1/2)B is carried out in an isothermal and isobaric batch reactor with initial volume of 100 liter. The reactor is i
The concentration of species A and B over time in the isothermal and isobaric batch reactor can be determined using the second-order irreversible reaction: A-(1/2)B.
In an isothermal and isobaric batch reactor, the total volume remains constant throughout the reaction. We are given that the initial volume of the reactor is 100 liters.
Let's denote the initial concentration of A as [A]₀ and the initial concentration of B as [B]₀. Since the stoichiometric coefficient of A is 1 and the stoichiometric coefficient of B is 1/2, the initial concentration of B can be calculated as [B]₀ = 2[A]₀.
As the reaction proceeds, the concentration of A decreases while the concentration of B increases. Let's assume that at time t, the concentration of A is [A] and the concentration of B is [B]. According to the reaction, the rate of change of A is given by:
d[A]/dt = -k[A]^(1/2)
where k is the rate constant for the reaction.
To solve this differential equation, we need an initial condition. At t = 0, [A] = [A]₀ and [B] = [B]₀.
Integrating the above differential equation from t = 0 to t = t and from [A]₀ to [A], we get:
∫(1/[A]^(1/2)) d[A] = -k∫dt
Integrating both sides, we obtain:
2[A]^(1/2) - 2[A]₀^(1/2) = -kt
Rearranging the equation, we find:
[A]^(1/2) = [A]₀^(1/2) - (kt/2)
Squaring both sides of the equation, we get:
[A] = [A]₀ - kt[A]₀^(1/2) + (k^2t^2/4)
Substituting [B] = 2[A]₀ - 2[A], we have:
[B] = 2[A]₀ - 2[A]₀ + 2kt[A]₀^(1/2) - (k^2t^2/2)
Simplifying further, we obtain:
[B] = 2kt[A]₀^(1/2) - (k^2t^2/2)
Now, we can substitute [A]₀ = [B]₀/2 and simplify the equation:
[B] = 2kt([B]₀/2)^(1/2) - (k^2t^2/2)
[B] = kt[B]₀^(1/2) - (k^2t^2/2)
Finally, we can substitute [B]₀ = 2[A]₀ into the equation:
[B] = kt(2[A]₀)^(1/2) - (k^2t^2/2)
[B] = 2kt[A]₀^(1/2) - (k^2t^2/2)
In an isothermal and isobaric batch reactor with an initial volume of 100 liters, the concentrations of species A and B can be determined over time using the equations [A] = [A]₀ - kt[A]₀^(1/2) + (k^2t^2/4) and [B] = 2kt[A]₀^(1/2) - (k^2t^2/2), where [A]₀ and [B]₀ are the initial concentrations of A and B, respectively, and k is the rate constant for the reaction.
Problem 2 (8 out of 30 points); The second order gas phase irreversible reaction: A-(1/2)B is carried out in an isothermal and isobaric batch reactor with initial volume of 100 liter. The reactor is initially filled with reactant A and inert I in the molar ratio: (A/I)-(1/3) at 270 K and 6 atm. Calculate the time needed for the product (B) to be 0.04 mole/liter, if the following data are given Ken=2.117 liter/(mole-min.) at 400 K E/R-1245 K
To learn more about concentrations, visit
https://brainly.com/question/21841645
#SPJ11
Consider non-premixed combustion of CH4 in an atmosphere (air) containing 3/4 of N2 and
1/4 of O2 by mass. The initial temperature of the reactants is 25°C. 1. Write a balanced stoichiometric reaction equation that completely converts the fuel into combustion products (H2O and CO2).
The balanced stoichiometric reaction equation for the complete combustion of CH4 in air, consisting of 3/4 N2 and 1/4 O2 by mass, can be written as CH4 + 2(O2 + 3.76N2) → CO2 + 2H2O + 7.52N2. This equation accounts for the presence of nitrogen as well as oxygen in the air.
When considering the non-premixed combustion of CH4 in air, it is important to account for the composition of air, which is primarily made up of nitrogen (N2) and oxygen (O2). By mass, air contains approximately 3/4 N2 and 1/4 O2.
To write a balanced stoichiometric reaction equation that completely converts CH4 into combustion products (H2O and CO2), we need to ensure that the equation accounts for the presence of nitrogen in the air. For every 1 mole of CH4, we require 2 moles of O2 for complete combustion. However, each mole of O2 is accompanied by 3.76 moles of N2 in air. Therefore, the balanced equation becomes:
CH4 + 2(O2 + 3.76N2) → CO2 + 2H2O + 7.52N2
This equation reflects the complete combustion of CH4, where each CH4 molecule reacts with 2 molecules of O2 (along with the accompanying N2) to produce CO2, H2O, and the remaining N2.
Learn more about stoichiometric : brainly.com/question/11130137
#SPJ11
Storage is required for 35,000 kg of propane, received as a gas at 10°℃ and 1(atm). Two proposals have been made: (a) Store it as a gas at 10°C and 1(atm). (b) Store it as a liquid in equilibrium with its vapor at 10°℃ and 6.294(atm). For this mode of storage, 90% of the tank volume is occupied by liquid. Compare the two proposals, discussing pros and cons of each. Be quantitative where possible.
There are two proposals to store 35,000 kg of propane the pros and cons for these proposals are
Proposal A: Store it as a gas at 10°C and 1 atm.
Pros: The gas is easier and cheaper to handle and transport as compared to liquid propane. The storage of gas is usually cheaper because no refrigeration is required.
Cons: Storing gas will require a larger volume as compared to liquid storage. The gas can only be stored at high pressure, which can be hazardous.
Proposal B: Store it as a liquid in equilibrium with its vapor at 10°C and 6.294 atm.
Pros: The liquid takes less space as compared to gas storage. The propane is stored at low pressure, which reduces the risk of an explosion.
Cons: The storage of liquid propane will require refrigeration, which is expensive. A considerable amount of the tank volume is occupied by liquid. This mode of storage is more expensive as compared to the gas storage.
Quantitative comparison: Proposal A: For a gas at 10°C and 1 atm, the propane occupies a volume of:V = nRT/P where n = m/MW, R = 0.0821 atm·L/(mol·K), T = 10°C + 273.15 = 283.15 K, P = 1 atm, m = 35,000 kg, MW = 44.1 g/molV = (35000/44.1) x (0.0821 x 283.15)/1V = 897,460 L
Proposal B: For propane stored as a liquid in equilibrium with its vapor at 10°C and 6.294 atm, the volume occupied by propane in the liquid phase is:V_l = (0.9 x V)/(1 + V×(6.294/1))V_l = (0.9 x 897460)/(1 + 897460 x 6.294/1)V_l = 144,620 L
Therefore, for the same amount of propane, storage as a liquid will require a lower volume of the tank as compared to gas storage. However, the liquid storage will require refrigeration, which is expensive. The storage of gas is usually cheaper because no refrigeration is required.
to know about Quantitative comparison
https://brainly.com/question/32211523
#SPJ11
Wet steam is water vapor containing droplets of liquid water. Steam quality defines the fraction of wet steam that is in the vapor phase. To dry steam (i.e., evaporate liquid droplets), wet steam (quality = 0.89) is heated isothermally. The pressure of the wet steam is 4.8 bar and the flow rate of the dried steam is 0.488 m3/s.
Determine the temperature (°C) at which the isothermal process occurs.
Determine the specific enthalpy of the wet steam and the dry steam (kJ/kg).
Determine the heat input (kW) required for the drying process.
The temperature in an isothermal process determines the specific enthalpy of wet and dry steam. Heat input for drying is calculated by multiplying the flow rate by the enthalpy difference.
The temperature at which the isothermal process occurs, we need to use steam tables or equations that relate pressure, temperature, and steam quality. However, the given information does not provide the necessary data to directly calculate the temperature. Additional information such as the specific volume or entropy would be required.
To determine the specific enthalpy of wet steam and dry steam, we can use steam tables or equations based on the given quality of 0.89 and the known pressure. The specific enthalpy is a measure of the energy content per unit mass of steam.
To calculate the heat input required for the drying process, we need the specific enthalpy values for wet steam and dry steam. The heat input can be obtained by multiplying the flow rate of dried steam (0.488 m3/s) by the specific enthalpy difference between wet steam and dry steam.
Without additional information or steam tables, it is not possible to provide specific numerical values for the temperature, specific enthalpy, or heat input. Further data or equations would be necessary to perform the calculations accurately.
Learn more about temperature : brainly.com/question/7510619
#SPJ11
1.2. Give the IUPAC names of each of the following di-substituted benzene compounds and also assign the substituents as either (Para (p), Ortho(o) or Meta(m)). (5) NO₂ 1.2.1 Br SO₂H 1.2.2 OH 1.2.3
IUPAC names of each of the following di-substituted benzene compounds and the substituents is given below,
1.2.1 - 1,4-dinitrobenzene (p-substituted)
1.2.2 - 2-bromobenzenesulfonic acid (o-substituted)
1.2.3 - 3-hydroxybenzoic acid (m-substituted)
1.2.1 - The compound with the substituents NO₂ on the benzene ring is named 1,4-dinitrobenzene. The numbers 1 and 4 indicate the positions of the nitro groups on the benzene ring. Since the substituents are located on opposite sides of the ring, they are considered para (p) to each other.
1.2.2 - The compound with the substituents Br and SO₂H on the benzene ring is named 2-bromobenzenesulfonic acid. The number 2 indicates the position of the bromo group on the benzene ring, and the term "sulfonic acid" indicates the presence of the SO₂H substituent. The bromo group and the sulfonic acid group are located on adjacent carbons of the ring, making them ortho (o) to each other.
1.2.3 - The compound with the substituent OH on the benzene ring is named 3-hydroxybenzoic acid. The number 3 indicates the position of the hydroxy group on the benzene ring. Since the hydroxy group is located three carbons away from the carboxylic acid group (-COOH), they are considered meta (m) to each other.
The IUPAC names of the given di-substituted benzene compounds are:
1.2.1 - 1,4-dinitrobenzene (p-substituted)
1.2.2 - 2-bromobenzenesulfonic acid (o-substituted)
1.2.3 - 3-hydroxybenzoic acid (m-substituted)
The assignment of substituents as para (p), ortho (o), or meta (m) is based on their relative positions on the benzene ring.
To know more about IUPAC names, visit
https://brainly.com/question/28872356
#SPJ11