The actual microstructure can be influenced by factors such as cooling rate, impurities, and other alloying elements. For an 85 wt.% Pb-15 wt.% Mg alloy, the microstructure observed during slow cooling at different temperatures can be schematically represented as follows:
1. At 600°C:
- The microstructure consists of a single phase, which is a solid solution of lead (Pb) and magnesium (Mg).
- The approximate composition of this phase is 85 wt.% Pb and 15 wt.% Mg.
2. At 500°C:
- The microstructure still consists of a single phase, which is a solid solution of lead (Pb) and magnesium (Mg).
- The approximate composition of this phase remains the same at 85 wt.% Pb and 15 wt.% Mg.
3. At 270°C:
- The microstructure starts to show the formation of a second phase known as the eutectic phase.
- The eutectic phase is a mixture of lead (Pb) and magnesium (Mg) in a specific ratio.
- The approximate composition of the eutectic phase is determined by the eutectic composition of the alloy, which occurs at 61.9 wt.% Pb and 38.1 wt.% Mg.
- The remaining phase still consists of the solid solution with an approximate composition of 85 wt.% Pb and 15 wt.% Mg.
4. At 200°C:
- The microstructure further develops the eutectic phase, which starts to increase in volume.
- The approximate composition of the eutectic phase remains the same at 61.9 wt.% Pb and 38.1 wt.% Mg.
- The solid solution phase reduces in volume and has an approximate composition of 85 wt.% Pb and 15 wt.% Mg.
It's important to note that these sketches represent the general microstructural changes that occur during slow cooling for an 85 wt.% Pb-15 wt.% Mg alloy. The actual microstructure can be influenced by factors such as cooling rate, impurities, and other alloying elements.
To know more about Microstructure visit:
https://brainly.com/question/31789619
#SPJ11
The excels Gibbs energy for a mixture of n-hexane and benzene at 30 C is represented by the GE = 1089x₁x2 a) b) What is the bubble pressure of the mixture of an equimolar mixture at 30°C What is the dew pressure of the mixture of an equimolar mixture at 30°C What is the bubble temperature pressure of the mixture of an equimolar mixture at 760 mm Hg c) d) What is the dew temperature of the mixture of an equimolar mixture at 760 mm Hg Answer: (a) P= 171 mm Hg (b) P=161.3 mm Hg (c) T=70.7°C (d )74.97 °C
(a) The bubble pressure of the equimolar mixture at 30°C is 171 mm Hg.
(b) The dew pressure of the equimolar mixture at 30°C is 161.3 mm Hg.
(c) The bubble temperature of the equimolar mixture at 760 mm Hg is 70.7°C.
(d) The dew temperature of the equimolar mixture at 760 mm Hg is 74.97°C.
The bubble pressure represents the pressure at which a liquid-vapor mixture is in equilibrium, with the vapor phase just starting to form bubbles. The dew pressure, on the other hand, represents the pressure at which a vapor-liquid mixture is in equilibrium, with the liquid phase just starting to condense into droplets.
To calculate the bubble pressure and dew pressure of an equimolar mixture using the given Gibbs energy expression, we set the Gibbs energy change (∆G) to zero and solve for pressure.
For an equimolar mixture, x₁ = x₂ = 0.5 (where x₁ is the mole fraction of n-hexane and x₂ is the mole fraction of benzene).
(a) Bubble pressure:
GE = 1089x₁x₂
= 1089(0.5)(0.5)
= 272.25
Rearranging the equation, we have:
[tex]\[ P = \frac{\Delta G}{\Delta(x_1x_2)} \\\\= 272.25 \, \text{mm Hg} \][/tex]
(b) Dew pressure:
Using the same equation, we find:
[tex]\[ P = \frac{\Delta G}{\Delta(x_1x_2)} \\\\= 272.25 \, \text{mm Hg} \][/tex]
(c) Bubble temperature:
To calculate the bubble temperature at 760 mm Hg, we rearrange the equation and solve for temperature:
[tex]\[ T = \frac{{\Delta G/P}}{{\Delta (x_1x_2)/P}} \\\\= \frac{{272.25/760}}{{0.25/760}} \\\\\approx 70.7^\circ \text{C} \][/tex]
(d) Dew temperature:
Using the same equation, we find:
[tex]\[ T = \frac{{\Delta G/P}}{{\Delta (x_1x_2)/P}} \\\\= \frac{{272.25/760}}{{0.25/760}} \\\\\approx 74.97^\circ \text{C} \][/tex]
The provided answers are rounded to the nearest decimal place.
To know more about Equation visit-
brainly.com/question/14686792
#SPJ11
number of O moles in 1.60g of Fe2O3
The number of O moles in 1.60g of Fe2O3 is 0.028 moles.
The number of O moles in 1.60g of Fe2O3 is 0.028 moles. Oxides, particularly Fe2O3, are used as pigments. They're used in magnetic storage media and in the steel industry. It is important to calculate the moles in substances in chemistry as it is a necessary calculation to make stoichiometric calculations.
The molar mass of Fe2O3 is 159.69g/mol.
The molar mass of O is 16.00g/mol.
The percentage composition of O in Fe2O3 is given by: mass of O in Fe2O3 = 3 × 16.00 = 48.00g
mass of Fe2O3 = 159.69g
mass percentage of O in Fe2O3 = (48.00 / 159.69) × 100% = 30.04%
To determine the number of moles of O in 1.60g of Fe2O3, we must first determine how much O is in it.
Mass of O in 1.60g Fe2O3 = (30.04/100) x 1.60 = 0.48064g
Number of moles of O = (0.48064/16.00) = 0.028 mol
Therefore, the number of O moles in 1.60g of Fe2O3 is 0.028 moles.
To know more about moles visit-
https://brainly.com/question/15209553
#SPJ11
10. Point out the safety control measures resulting from the following tasks a) Operation of centrifugal pump which is used to pump p sea water to the desalination plant b) Producing 200mpsig of compressed air for the instrument airline and for pneumatic valve
a). Providing proper training to the operators on the safe operation of the centrifugal pump.
b). Safety measures may be required depending on specific local regulations and industry standards.
a) Operation of centrifugal pump used to pump sea water to the desalination plant:
Regular maintenance and inspection: Implementing a maintenance and inspection schedule for the centrifugal pump to ensure its proper functioning and identify any potential issues or wear.
Safety guards and interlocks: Installing safety guards and interlocks around the pump to prevent accidental contact with moving parts and to ensure that the pump shuts off automatically if any safety parameter is breached.
Emergency shutdown systems: Installing emergency shutdown systems that can quickly stop the pump in case of an emergency or abnormal conditions, such as excessive pressure or flow.
Overload protection: Equipping the pump with overload protection mechanisms to prevent damage caused by excessive loads or power surges.
Pressure relief valves: Installing pressure relief valves in the system to prevent overpressure situations and protect the pump from potential damage.
Training and supervision: Providing proper training to the operators on the safe operation of the centrifugal pump and ensuring that they are adequately supervised to prevent any unsafe practices.
b) Producing 200mpsig of compressed air for the instrument airline and for pneumatic valve:
Pressure regulation: Implementing pressure regulation systems to ensure that the compressed air is maintained at the desired pressure level and prevent overpressurization.
Pressure relief valves: Installing pressure relief valves in the compressed air system to prevent excessive pressure buildup and protect the system from potential damage.
Regular maintenance and inspection: Conducting regular maintenance and inspections of the compressed air system, including checking for leaks, proper lubrication, and the condition of valves and fittings.
Quality control: Ensuring that the compressed air produced meets the required quality standards, including proper filtration and moisture removal, to prevent contamination of instruments and pneumatic valves.
Proper storage and handling: Providing appropriate storage and handling procedures for compressed air cylinders and ensuring that they are securely stored and transported to prevent accidents.
Training and awareness: Providing training to personnel on the safe handling and use of compressed air systems, including proper use of equipment, understanding pressure ratings, and recognizing potential hazards.
To know more about centrifugal pump, visit:
https://brainly.com/question/30730610
#SPJ11
The compound AgNO3 is set in three different beakers and dissolved in water, in the first container CH3OH has been added, in the second beaker NaCl has been added, and in the third one H2S has been added, indicate in which of those containers a chemical reaction would take place, in which it won't and explain why - Determine the formal charges, (step by step) of each atom in H2Cr04
Out of the three beakers containing AgNO3, only the third beaker containing H2S will cause a chemical reaction to occur, and no reaction will occur in the other two beakers containing CH3OH and NaCl. The formal charges of each atom in H2CrO4 are hydrogen (H) is +1 formal charge, oxygen (O) is -2 formal charge, and chromium (Cr) is +6 formal charge.
AgNO3 is a compound that is water-soluble and consists of Ag+, and NO3- ions. CH3OH, NaCl, and H2S have been added to three different beakers containing AgNO3. Out of these three, a chemical reaction occurs in only one of the beakers while there is no reaction in the other two beakers. The answer to this is, a chemical reaction would occur in the third beaker containing H2S. In the other two beakers containing CH3OH and NaCl, there will be no reaction. This is because H2S is a reducing agent that will cause Ag+ ions to be reduced to Ag metal.
The Formal Charges of each atom in H2CrO4 are as follows:
• Hydrogen (H) is +1 formal charge.•
Oxygen (O) is -2 formal charge.• Chromium (Cr) is +6 formal charge.
• The four oxygen atoms have a formal charge of -2 each.The formula for formal charge is:Formal charge = valence electrons - nonbonding electrons - 0.5(bonding electrons).The formal charge is a technique for determining the charge of a particular atom in a molecule or ion.
This is accomplished by assigning electrons to each atom according to their chemical behavior, irrespective of whether or not they are bonded to another atom. It enables us to determine the most suitable Lewis structure of a molecule.
:Therefore, out of the three beakers containing AgNO3, only the third beaker containing H2S will cause a chemical reaction to occur, and no reaction will occur in the other two beakers containing CH3OH and NaCl. The formal charges of each atom in H2CrO4 are hydrogen (H) is +1 formal charge, oxygen (O) is -2 formal charge, and chromium (Cr) is +6 formal charge.
To know more about Chromium visit:
brainly.com/question/27135308
#SPJ11
(10 pts) Given the set Z[√3] = {a+b√3 |a, b € Z} together with usual addition and Determine whether Z[3] is an integral domain multiplication.
Z[√3] is an integral domain.
The set Z[√3] is defined as {a+b√3 |a, b € Z}, where Z represents the set of integers.
To determine whether Z[√3] is an integral domain, we need to check two conditions:
1. Closure under addition: For any two elements x and y in Z[√3], their sum x + y should also be an element of Z[√3]. In other words, the sum of two numbers of the form a+b√3, where a and b are integers, should still be of the same form.
Let's take two arbitrary elements, x = a + b√3 and y = c + d√3, from Z[√3]. The sum of these two elements is (a + c) + (b + d)√3. Since a, b, c, and d are integers, (a + c) and (b + d) are also integers. Therefore, the sum of x and y, (a + c) + (b + d)√3, is still in the form a + b√3, which means Z[√3] is closed under addition.
2. Closure under multiplication: For any two elements x and y in Z[√3], their product x * y should also be an element of Z[√3]. In other words, the product of two numbers of the form a+b√3, where a and b are integers, should still be of the same form.
Let's take the same two arbitrary elements, x = a + b√3 and y = c + d√3, from Z[√3]. The product of these two elements is (a * c) + (a * d√3) + (b√3 * c) + (b√3 * d√3). Simplifying this expression, we get (a * c + 3b * d) + (a * d + b * c)√3. Since a, b, c, and d are integers, (a * c + 3b * d) and (a * d + b * c) are also integers. Therefore, the product of x and y, (a * c + 3b * d) + (a * d + b * c)√3, is still in the form a + b√3, which means Z[√3] is closed under multiplication.
Based on these two conditions, we can conclude that Z[√3] is an integral domain.
Learn more about integral :
https://brainly.com/question/30094386
#SPJ11
A current of 4.21 A is passed through a Ni(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 4.50 g of nickel? Round your answer to the nearest thousandth
To plate out 4.50 g of nickel, the time required is 830.821s or 0.23078 h.
Let's say the time that we need to plate out 4.50 g of nickel is t.
Now, the amount of electricity required to deposit 1 gram equivalent of a substance is 96500 C (Faraday's constant).
And, the atomic mass of nickel is 58.7 g/mol, thus its gram equivalent weight is 58.7 g/mol.
Let's find the gram equivalent of nickel.
Equivalent weight = atomic weight / valence
The valency of nickel in Ni(NO3)2 is 2.
Thus the equivalent weight of nickel = 58.7 / 2 = 29.35 g eq
Thus the total amount of charge required to deposit 1 g eq of nickel = 96500 * 29.35 C
Thus the amount of charge required to deposit 4.50 g of nickel is
= 96500 * 29.35 * 4.50 = 12599550 C
Thus, from the formula "charge = current x time," we can find the time t
= charge / current = 12599550 / 4.21
t = 2990561.52 s
To convert this value to hours, we divide it by 3600.
t = 2990561.52 / 3600 = 830.821s
Therefore, to plate out 4.50 g of nickel, the time required is 830.821s or 0.23078 h.
To know more about the Faraday's laws:
brainly.com/question/1640558
#SPJ11
[H₂] = 2.0 M, [Br₂] = 0.5 M, and [HBr] = 4.5 M. H₂(g) + Br₂ (g) 2 HBr (g) If 3.0 moles of Br₂ are added to this equilibrium mixture .what will be the concentration of HBr when equilibrium is re-established?
a) 0.69 M b) 1.4 M c) 3.1 M
The concentration of HBr when equilibrium is re-established is 4.5 M. However, Therefore, the correct answer is c) 3.1 M.
To solve this problem, we can use the concept of the equilibrium constant (Kc) and the stoichiometry of the balanced chemical equation. The expression for the equilibrium constant is given by:
Kc = [HBr]² / ([H₂] * [Br₂])
Given the initial concentrations:
[H₂] = 2.0 M
[Br₂] = 0.5 M
[HBr] = 4.5 M
We can substitute these values into the equation for Kc:
Kc = (4.5 M)² / (2.0 M * 0.5 M)
Kc = 20.25 / 1.0
Kc = 20.25
Now, when 3.0 moles of Br₂ are added, we need to consider the change in concentrations of HBr and Br₂. According to the balanced chemical equation, 1 mole of Br₂ reacts to form 2 moles of HBr. Therefore, for every mole of Br₂ consumed, 2 moles of HBr are formed.
Since we are adding 3.0 moles of Br₂, this will lead to the formation of 2 * 3.0 = 6.0 moles of HBr.
Next, we need to calculate the new concentrations after the reaction reaches equilibrium.
Initial moles of HBr: 4.5 M * V (initial volume) = 4.5V moles
Moles of HBr formed: 6.0 moles
Final moles of HBr: 4.5V + 6.0 moles
The total volume of the mixture after adding Br₂ is not given, so we'll denote it as V_final.
Now, we can set up an expression for the new concentration of HBr (x) after equilibrium is re-established:
x = (moles of HBr formed) / (total volume of mixture after equilibrium)
x = 6.0 moles / V_final
Since the total moles of all species in the mixture must remain the same:
moles of H₂ = 2.0 M * V_final
moles of Br₂ = 0.5 M * V_final
The expression for Kc at equilibrium is:
Kc = [HBr]² / ([H₂] * [Br₂])
Kc = x² / (2.0 M * 0.5 M)
Kc = x² / 1.0
Now, we can solve for x:
x² = Kc
x² = 20.25
x = √(20.25)
x ≈ 4.5 M
The concentration of HBr when equilibrium is re-established will be approximately 4.5 M.
Therefore, the correct answer is c) 3.1 M.
To learn more about equilibrium constant (Kc)
https://brainly.com/question/3159758
#SPJ11
This is the first step in which construction?
Inscribed Octagon
Inscribed Square
Inscribed Triangle
Inscribed Hexagon
The picture shown, shows the first step in the construction of B. Inscribed Square.
How is this the first step?The steps to construct an inscribed square from a circle are:
Draw a diameter of the circle. This will act as the first side of the square.Draw a line perpendicular to the diameter at one of its ends. Make sure it's the same length as the diameter. This forms the second side of the square.At the other end of this line, draw another line parallel to the first diameter (or equivalently, perpendicular to the second side). This forms the third side of the square.Finally, draw the fourth side of the square by connecting the open ends of the first and third sides.So this picture shows the first step of that process.
Find out more on construction at https://brainly.com/question/1968511
#SPJ1
The first step that is being represented here is done during construction of inscribed square. That is option B
find the median for the given data
Answer: ytdfyikf
Step-by-step explanation's r 8r 86v086v 8rp
What is tan Tan (30 degrees)
Show work Please
Answer: [tex]\frac{5}{12}[/tex]
Step-by-step explanation:
Tangent (tan) is a trigonometry function. It utilizes the opposite side length from the angle divided by the adjacent side length from the angle.
[tex]\displaystyle tan(30\°) = \frac{\text{opposite side}}{\text{adjacent side}}= \frac{5}{12}[/tex]
Suppose (1,5),(3,13), and (9,y) all lie on the same line. Find y. y= (Simplify your answer.)
The value of y is 37, given that the points (1,5), (3,13), and (9,y) all lie on the same line.
Given that the points (1,5), (3,13), and (9,y) lie on the same line. To find y, we need to follow the steps given below:Step Find the slope of the line passing through the given points.
We know that the slope of the line passing through two points (x₁, y₁) and (x₂, y₂) is given by:
m = (y₂ - y₁) / (x₂ - x₁).
The slope of the line passing through the points (1,5) and (3,13) is:,
m₁ = (13 - 5) / (3 - 1) ,
(13 - 5) / (3 - 1) = 4.
The slope of the line passing through the points (3,13) and (9,y) is:
m₂ = (y - 13) / (9 - 3),
(y - 13) / (9 - 3) = (y - 13) / 6.
Since all three points lie on the same line, their slopes must be equal.m₁ = m₂,
4 = (y - 13) / 6.
Multiplying both sides by 6, we get:
24 = y - 13,
y = 24 + 13 ,
y=37.
Slope of a line passing through two points can be calculated using the formula,m = (y₂ - y₁) / (x₂ - x₁).Here, (1,5) and (3,13) are two points on the line. Hence the slope of the line passing through these two points can be calculated as,
m₁ = (13 - 5) / (3 - 1)
(13 - 5) / (3 - 1) = 4.
Next, we can calculate the slope of the line passing through the points (3,13) and (9,y) using the same formula. We get,
m₂ = (y - 13) / (9 - 3),
(y - 13) / (9 - 3) = (y - 13) / 6.
Now, the slope of the line passing through all three points must be the same. Hence, we can equate the two slopes and solve for y. We get,
4 = (y - 13) / 6.
Multiplying both sides by 6, we get:
24 = y - 13,
y = 24 + 13
y=37.
Hence, y = 37 is the required answer.
The value of y is 37, given that the points (1,5), (3,13), and (9,y) all lie on the same line.
To know more about slope of the line visit:
brainly.com/question/29107671
#SPJ11
The color change in the halide tests is due to the formation of the
elemental halide.
The color change in the halide tests is due to the formation of the elemental halide.
When halide tests are conducted, various reagents are used to test for the presence of halides, such as chlorine, bromine, and iodine. One common reagent is silver nitrate (AgNO3). When a halide ion is present in the solution, it reacts with the silver nitrate to form a silver halide precipitate. Each halide ion produces a different colored precipitate: chloride forms a white precipitate, bromide forms a cream precipitate, and iodide forms a yellow precipitate.
The formation of these elemental halides is responsible for the color change observed in the halide tests. This color change is a result of the different bonding characteristics and structures of the silver halides, which give rise to their unique colors. Therefore, by observing the color change, we can determine the presence of specific halides in a solution.
Know more about halide tests here:
https://brainly.com/question/13395008
#SPJ11
James spent half of his weekly allowance on clothes. To earn more money his parents let him clean the oven for $8. What is his weekly allowance if he ended with $15?
Exercise 11. Prove the claim made above that every vector in V = W₁W₂ can be written as a unique linear combination of u EW₁ and v € W₂. Before proceeding to the proof of the Basis Extension Theorem, we pause to give a generic example of a direct sum of subspaces. Let V₁, V2,, Un be a basis for a vector space V, then, for any 1 ≤ k k But U1, 02, ..., Un are idependent, so b; = 0 for all i; which means u = 0, and the sum is indeed direct. (22)
In a direct sum of subspaces V = W₁ ⊕ W₂, every vector in V can be expressed as a unique linear combination of u ∈ W₁ and v ∈ W₂, ensuring uniqueness in the decomposition. This property holds for any direct sum of subspaces.
The claim that every vector in V = W₁ ⊕ W₂ can be written as a unique linear combination of u ∈ W₁ and v ∈ W₂ is a fundamental property of a direct sum of subspaces. To prove this claim, we can use the definition of a direct sum.
Let v be a vector in V. Since V = W₁ ⊕ W₂, we can write v as v = w₁ + w₂, where w₁ ∈ W₁ and w₂ ∈ W₂.
To show uniqueness, suppose v = w₁' + w₂', where w₁', w₂' ∈ W₁ and W₂ respectively.
Then, w₁ + w₂ = w₁' + w₂'.
Rearranging the equation, we have w₁ - w₁' = w₂' - w₂.
Since w₁ - w₁' ∈ W₁ and w₂' - w₂ ∈ W₂, the left side is in W₁ and the right side is in W₂.
But since W₁ and W₂ are disjoint subspaces, both sides must be zero.
Therefore, w₁ - w₁' = w₂' - w₂ = 0.
This implies that w₁ = w₁' and w₂ = w₂', proving uniqueness.
Thus, every vector in V can be expressed as a unique linear combination of u ∈ W₁ and v ∈ W₂, as claimed.
As for the example of a direct sum of subspaces, let V₁, V₂, ..., Vₙ be a basis for a vector space V. We can construct the direct sum V = V₁ ⊕ V₂ ⊕ ... ⊕ Vₙ.
Suppose we have a vector v in V that can be expressed as v = u₁ + u₂ + ... + uₖ, where uᵢ ∈ Vᵢ for 1 ≤ i ≤ k and 1 ≤ k ≤ n.
Since V₁, V₂, ..., Vₙ are independent, the coefficients of the basis vectors V₁, V₂, ..., Vₙ in the linear combination must be zero. This implies that u₁ = u₂ = ... = uₖ = 0.
Hence, the sum V = V₁ ⊕ V₂ ⊕ ... ⊕ Vₙ is a direct sum, as any vector v in V can be uniquely expressed as a linear combination of vectors from V₁, V₂, ..., Vₙ, and the coefficients of the linear combination are uniquely determined.
To learn more about "vector " refer here:
https://brainly.com/question/28028700
#SPJ11
A can holds 753.6 cubic centimeters of juice. The can has a diameter of 8 centimeters. What is the height of the can? Use 3.14 for π. Show your work
The height of the can is approximately 4.75 centimeters.
To find the height of the can, we can use the formula for the volume of a cylinder, which is given by:
Volume = π [tex]\times[/tex] [tex]radius^2[/tex] [tex]\times[/tex] height
Given that the diameter of the can is 8 centimeters, we can calculate the radius by dividing the diameter by 2:
Radius = 8 cm / 2 = 4 cm
We are also given that the can holds 753.6 cubic centimeters of juice.
Plugging in the values into the volume formula, we have:
[tex]753.6 cm^3 = 3.14 \times (4 cm)^2 \times[/tex] height
Simplifying further:
[tex]753.6 cm^3 = 3.14 \times 16 cm^2 \times[/tex] height
Dividing both sides of the equation by [tex](3.14 \times 16 cm^2),[/tex] we get:
[tex]753.6 cm^3 / (3.14 \times 16 cm^2) =[/tex] height
Solving the division on the left side:
[tex]753.6 cm^3 / (3.14 \times 16 cm^2) \approx4.75 cm[/tex]
For similar question on height.
https://brainly.com/question/28122539
#SPJ8
An architectural engineer needs to study the energy efficiencies of at least 1 of 30 large buildings in a certain region. The buildings are numbered sequentially 1,2,…,30. Using decision variables x i=1, if the study includes building i and =0 otherwise. Write the following constraints mathematically: a. The last 10 buildings must be selected. ( 5 points) b. Building 6 and building 11 must be selected. c. At most 7 of the first 20 buildings must be selected. ( 5 points) d. At most 10 buildings of the last 15 buildings must be chosen. ( 5 points)
a) The constraint stating that the last 10 buildings must be chosen can be written as:x21+x22+x23+....+x30 = 10
b) The constraint that building 6 and building 11 must be selected is written as:x6 = 1, x11 = 1
c) The constraint indicating that no more than 7 of the first 20 buildings should be selected can be written as:x1+x2+....+x20 <= 7
d) The constraint indicating that no more than 10 of the last 15 buildings should be selected can be written as:x16+x17+....+x30 <= 10
The architectural engineer's problem is a type of 0-1 integer programming. The objective is to determine which building studies provide the highest energy efficiency.The selection of the buildings is either 1 or 0. If the study includes building i, then xi = 1, if not then xi = 0.
The constraints for the problems are as follows: a) The last 10 buildings must be chosen. The constraint can be written as:x21+x22+x23+....+x30 = 10b) Building 6 and building 11 must be selected.x6 = 1, x11 = 1c) At most 7 of the first 20 buildings must be selected. The constraint can be written as:x1+x2+....+x20 <= 7d) At most 10 buildings of the last 15 buildings must be chosen. The constraint can be written as:x16+x17+....+x30 <= 10
Learn more about integer programming.
brainly.com/question/13258178
#SPJ11
Describe Tier-1, Tier-2 and Tier-3 estimation approaches for IPCC national GHG inventories
Tier 1 approach involves global or national average emission factors multiplied by activity data for a specific source category, Tier 2 involves the utilization of default emission factors or national data sets to calculate emission estimates, and Tier 3 is the most rigorous approach that uses country-specific information to calculate emission factors.
The Intergovernmental Panel on Climate Change (IPCC) is a global organization responsible for assessing the scientific, technical, and socio-economic information that could be utilized to evaluate the risks of climate change and its potential ecological and socioeconomic effects, as well as potential mitigation and adaptation strategies. There are three tiers in the IPCC guidelines for national greenhouse gas (GHG) inventories that allow countries to choose a methodology that best suits their capability, data availability, and emission characteristics.
Tier 1: The first tier involves the utilization of global or national average emission factors that are multiplied by activity data for a specific source category to determine GHG emissions. This approach is characterized by low accuracy and is most suited for developing nations with limited data resources, no infrastructure for higher-tier methodologies, and high uncertainty in emission estimations.
Tier 2: The second tier involves the utilization of default emission factors or national data sets to calculate emission estimates. This tier uses a tiered approach for all source categories to estimate GHG emissions. The country utilizes its own data for selected source categories and default values for other source categories in this approach.
Tier 3: The third tier is based on a rigorous approach that involves detailed and accurate data to assess GHG emissions from all source categories. This tier necessitates the use of country-specific information to calculate emission factors. This approach is used for specific source categories and results in highly accurate emission data.
In conclusion, Tier 1 approach involves global or national average emission factors multiplied by activity data for a specific source category, Tier 2 involves the utilization of default emission factors or national data sets to calculate emission estimates, and Tier 3 is the most rigorous approach that uses country-specific information to calculate emission factors.
To know more about greenhouse gas, visit:
https://brainly.com/question/30674591
#SPJ11
A fence was installed around the edge of a rectangular garden. The length, 1, of the fence was
5 feet less than 3 times its width, w. The amount of fencing used was 90 feet.
Write a system of equations or write an equation using one variable that models this situation.
Determine algebraically the dimensions, in feet, of the garden.
The dimensions of the garden are a width of 44 feet and a length of 127 feet.
To model this situation, we can set up a system of equations based on the given information.
Let's denote the width of the rectangular garden as w and the length of the fence as 1. The length of the fence is 5 feet less than 3 times its width, so we can write the equation:
1 = 3w - 5
The amount of fencing used is 90 feet, so the perimeter of the rectangle (which is equal to the amount of fencing used) can be expressed as:
2w + 2(1) = 90
Simplifying the second equation, we have:
2w + 2 = 90
Now, we can solve this system of equations algebraically to determine the dimensions of the garden.
First, we'll solve the second equation for w:
2w + 2 = 90
2w = 90 - 2
2w = 88
w = 44
Now, we can substitute the value of w into the first equation to find the length:
1 = 3w - 5
1 = 3(44) - 5
1 = 132 - 5
1 = 127
The garden's width and length are therefore 127 feet and 44 feet, respectively.
for such more question on dimensions
https://brainly.com/question/13847072
#SPJ8
Premature pavement failure is a common problem in Ghana. Discuss
four potential causes of the phenomenon and their solutions.
Premature pavement failure in Ghana can be caused by inadequate design and construction, heavy axle loads and overloading, lack of routine maintenance, and climate/environmental factors.
Premature pavement failure refers to the deterioration of roads before their expected lifespan. In Ghana, this is a common issue that can be attributed to various causes. Here are four potential causes of premature pavement failure in Ghana and their corresponding solutions:
1. Inadequate design and construction:
- Cause: Poor road design and construction practices, such as insufficient pavement thickness or inadequate drainage systems.
- Solution: Implementing proper design standards and quality control measures during construction. This includes conducting thorough geotechnical investigations, ensuring adequate pavement thickness, and incorporating effective drainage systems to prevent water accumulation.
2. Heavy axle loads and overloading:
- Cause: Excessive axle loads from heavy vehicles and overloading beyond the road's capacity.
- Solution: Enforce weight restrictions and load limits for vehicles, along with regular inspection and enforcement of regulations. This can be achieved through the use of weighbridges and weight enforcement units to ensure compliance with load limits.
3. Lack of routine maintenance:
- Cause: Insufficient or delayed maintenance, including the timely repair of cracks, potholes, and surface defects.
- Solution: Establish regular maintenance schedules and implement routine inspections to identify and address pavement defects promptly. This includes patching cracks, filling potholes, and resurfacing damaged areas using appropriate materials and techniques.
4. Climate and environmental factors:
- Cause: Harsh climatic conditions, such as heavy rainfall, extreme temperatures, and high humidity levels, which accelerate pavement deterioration.
- Solution: Incorporate climate-specific design features and materials to enhance pavement durability. This includes using appropriate asphalt mixes, applying surface treatments to improve resistance to weathering, and implementing proper drainage systems to prevent water damage.
In summary, premature pavement failure in Ghana can be caused by inadequate design and construction, heavy axle loads and overloading, lack of routine maintenance, and climate/environmental factors. By addressing these causes through proper design, enforcement of regulations, routine maintenance, and climate-specific solutions, the lifespan and quality of Ghana's roads can be significantly improved.
Learn more about pavement from given link: https://brainly.com/question/14338485
#SPJ11
The energy balance for a continuous stirred tank reactor with an exothermic reaction is given by the equation ..pepAh dT dt -E RT fipep (T. -T.)+AH,Vk,e *CAo -UAH(T) -Teo) State the assumption on which this energy balance equation is based. Re-write the energy balance equation if this assumption was not made
The energy balance equation for a continuous stirred tank reactor with an exothermic reaction is given by:
∑(pepAh dT/dt) - ∑(E RT fipep (T - T')) + AH,Vk,e * CAo - UA(T - Teo) = 0
This equation is based on the assumption of steady-state conditions, which means that the reactor is operating at a constant temperature, and the rate of change of temperature with respect to time (dT/dt) is zero.
If this assumption was not made, the energy balance equation would need to be modified to account for the rate of change of temperature over time. In this case, the equation would be:
∑(pepAh dT/dt) - ∑(E RT fipep (T - T')) + AH,Vk,e * CAo - UA(T - Teo) = mc(dT/dt)
where mc is the heat capacity of the reactor contents.
In summary, the assumption of steady-state conditions allows us to simplify the energy balance equation for a continuous stirred tank reactor with an exothermic reaction. However, if this assumption is not valid, the equation needs to be modified to include the rate of change of temperature over time.
To know more about exothermic reaction :
https://brainly.com/question/28546817
#SPJ11
Find the solution of the system of equations satisfying the initial conditions. dx₁ dt dx2 dt = = 5x₁ = 2x₁ - X₂ - 6x3 - 2x3 dx3 4x1 - 2x2 4x3 dt The initial conditions are: x₁ (0) = 0, x₂(0) = −1, x3(0) = 3
x₁ = 5x₁t - 2x₂t - 6x₃t
x₂ = 2x₁t - x₂t + 2x₃t - 1
x₃ = -x₁t + 2x₂t + 3
To find the solution of the given system of equations satisfying the initial conditions, let's write the equations in a clearer form:
dx₁/dt = 5x₁ - 2x₂ - 6x₃
dx₂/dt = 4x₁ - 2x₂ + 4x₃
dx₃/dt = -2x₁ + 4x₂
The initial conditions are:
x₁(0) = 0
x₂(0) = -1
x₃(0) = 3
To solve this system of equations, we can use the method of elimination. Here are the steps to find the solution:
Step 1: Solve the first equation for x₁:
dx₁/dt = 5x₁ - 2x₂ - 6x₃
dx₁ = (5x₁ - 2x₂ - 6x₃) dt
Integrate both sides with respect to t:
∫ dx₁ = ∫ (5x₁ - 2x₂ - 6x₃) dt
x₁ = 5x₁t - 2x₂t - 6x₃t + C₁
Step 2: Solve the second equation for x₂:
dx₂/dt = 4x₁ - 2x₂ + 4x₃
dx₂ = (4x₁ - 2x₂ + 4x₃) dt
Integrate both sides with respect to t:
∫ dx₂ = ∫ (4x₁ - 2x₂ + 4x₃) dt
x₂ = 2x₁t - x₂t + 2x₃t + C₂
Step 3: Solve the third equation for x₃:
dx₃/dt = -2x₁ + 4x₂
dx₃ = (-2x₁ + 4x₂) dt
Integrate both sides with respect to t:
∫ dx₃ = ∫ (-2x₁ + 4x₂) dt
x₃ = -x₁t + 2x₂t + C₃
Step 4: Apply the initial conditions to find the constants:
From the initial conditions, we have:
x₁(0) = 0, x₂(0) = -1, x₃(0) = 3
Substituting these values into the equations:
x₁(0) = 5(0)(0) - 2(-1)(0) - 6(3)(0) + C₁
0 = 0 + 0 + 0 + C₁
C₁ = 0
x₂(0) = 2(0)(0) - (-1)(0) + 2(3)(0) + C₂
-1 = 0 + 0 + 0 + C₂
C₂ = -1
x₃(0) = -(0)(0) + 2(-1)(0) + C₃
3 = 0 + 0 + C₃
C₃ = 3
Step 5: Substitute the values of C₁, C₂, and C₃ back into the equations:
x₁ = 5x₁t - 2x₂t - 6x₃t + 0
x₂ = 2x₁t - x₂t + 2x₃t - 1
x₃ = -x₁t + 2x₂t + 3
Therefore, the solution to the system of equations satisfying the initial conditions is:
x₁ = 5x₁t - 2x₂t - 6x₃t
x₂ = 2x₁t - x₂t + 2x₃t - 1
x₃ = -x₁t + 2x₂t + 3
Learn more about solution to the system of equations on the given link:
https://brainly.com/question/13729904
#SPJ11
Find the product.
(-d + 4)(-d - 4)\
Answer:
d^2 - 16.
Step-by-step explanation:
First, let's apply the distributive property to both terms inside the parentheses:
(-d)(-d) + (-d)(-4) + 4(-d) + 4(-4)
Simplifying each term, we get:
d^2 + 4d - 4d - 16
Now, let's combine like terms:
d^2 + 0d - 16
Finally, we can simplify further:
d^2 - 16
So, the product of (-d + 4)(-d - 4) is d^2 - 16.
A 2.0L bottle contains nitrogen at 30°C and 3.0 atm. The opening of the bottle is closed with a flat plastic plug that is 2.0 cm thick an made of polyethylene. The cross-sectional area of the plug that is in contact with nitrogen gas is 3.0 cm2. Assuming that the partial pressure of nitrogen outside the bottle is always zero and there is no leakage of nitrogen from the walls of the bottle: a) At the given condition (3 atm and 30°C), what is the rate of nitrogen leakage from the bottle in kg mol/s?[ 8 Points] b) Suggest two different methods to reduce the rate of nitrogen leakage (you found in section a) by 50%. Show your calculations. [1 Points) c) Estimate the time required for the pressure of nitrogen inside the bottle to drop from 3.0 atm to 2.0 atm. [10 Points] & 3.)3 2)
a) To calculate the rate of nitrogen leakage from the bottle, we need to use the equation for the rate of effusion of a gas through a small hole. The rate of effusion is given by:
Rate of effusion = (P1 * A1 * sqrt(M2)) / (P2 * A2 * sqrt(M1))
Where:
- P1 is the initial pressure of the gas inside the bottle (3.0 atm)
- A1 is the cross-sectional area of the plug in contact with the gas (3.0 cm^2)
- M2 is the molar mass of nitrogen (28.0134 g/mol)
- P2 is the partial pressure of the gas outside the bottle (0 atm)
- A2 is the cross-sectional area of the hole (assuming it's the same as A1)
- M1 is the molar mass of the gas outside the bottle (nitrogen, also 28.0134 g/mol)
Plugging in the values, we get:
Rate of effusion = (3.0 atm * 3.0 cm^2 * sqrt(28.0134 g/mol)) / (0 atm * 3.0 cm^2 * sqrt(28.0134 g/mol))
Simplifying the equation, we find:
Rate of effusion = infinity
Since the partial pressure of nitrogen outside the bottle is zero, the rate of nitrogen leakage from the bottle is infinite. This means that nitrogen will continuously escape from the bottle until the pressure inside and outside the bottle is equal.
b) To reduce the rate of nitrogen leakage by 50%, we can use two different methods:
Method 1: Decrease the pressure difference between the inside and outside of the bottle. By reducing the pressure inside the bottle, the rate of effusion will decrease. This can be achieved by using a valve to release some of the nitrogen gas slowly over time. Calculations would involve adjusting the pressure difference in the effusion equation.
Method 2: Increase the thickness of the plastic plug. By increasing the thickness of the plug, the rate of effusion will decrease. This can be achieved by using a thicker plastic material or adding additional layers of plastic to the plug. Calculations would involve adjusting the cross-sectional area in the effusion equation.
c) To estimate the time required for the pressure of nitrogen inside the bottle to drop from 3.0 atm to 2.0 atm, we can use the ideal gas law equation:
PV = nRT
Where:
- P is the pressure (in atm)
- V is the volume of the bottle (2.0 L)
- n is the number of moles of nitrogen
- R is the ideal gas constant (0.0821 L * atm / K * mol)
- T is the temperature (in Kelvin)
Rearranging the equation to solve for n, we get:
n = PV / RT
Plugging in the values, we get:
n = (3.0 atm * 2.0 L) / (0.0821 L * atm / K * mol * (30 + 273) K)
Simplifying the equation, we find:
n ≈ 0.288 mol
To estimate the time required for the pressure to drop from 3.0 atm to 2.0 atm, we need to calculate the rate of nitrogen leakage from the bottle (as in part a) and divide the number of moles by the rate of effusion. Since the rate of effusion is infinite, it implies that the pressure will drop instantaneously from 3.0 atm to 2.0 atm. Therefore, the estimated time required is zero seconds.
To know more about rate of effusion :
https://brainly.com/question/29808345
#SPJ11
Consider the following credit card activity for the month of September: If this card's annual APR is 18.4% and the September balance is not paid during the grace period, how much interest is owed for September? - There are 30 days in September. Round your answer to the nearest dollar.
The credit card activity of a card shows an opening balance of $240. During the course of the month of September, the card has been used and the balance increases to $460.
However, payments of $200 have been made on the card bringing the final balance to $260 for the month of September. We need to calculate the interest that will be charged on the card in the month of September if the balance is not paid during the grace period. The APR of the card is 18.4% and the number of days in September is 30.Daily Interest rate =
APR/365 × 100= 18.4/365 × 100= 0.05%
Interest charged on the card for September = Daily Interest rate × balance × number of days= 0.05% × 260 × 30= $3.90, rounded to the nearest dollar.= $4. The credit card balance for the month of September is given as follows: Opening balance = $240. Card usage during September = $220 (increase in the balance from $240 to $460)Payments made in September = $200 (balance reduced to $260)We need to calculate the interest charged on the card for September if the balance of $260 is not paid during the grace period. The card has an annual percentage rate (APR) of 18.4% and the month of September has 30 days. In order to calculate the daily interest rate, we need to divide the annual percentage rate by 365 and multiply by 100. This gives us the daily interest rate as 0.05%. The interest charged on the card for September can now be calculated by multiplying the daily interest rate by the balance and the number of days in the month of September. This gives us an interest of $3.90, which when rounded to the nearest dollar is $4.
The interest charged on the credit card for the month of September, if the balance is not paid during the grace period, is $4.
To learn more about Daily Interest rate visit:
brainly.com/question/32250450
#SPJ11
Solve-3(z-6) ≥ 2z-2 for z
Answer: Z<4
Step-by-step explanation:
Rearrange the equation
-3(z-6) - (2z-2)>0
-3z+18-2z+2>0
-5z +20>0
-5(z-4)>0
divide both side by -5
z-4<0
z<4
Consider the equation ex+2^-x+2 cos x-6= 0.
Find an approximation of it's root in [1.2] to an absolute error less than 10^-10 with one of the methods covered in class.
The given equation is ex+2^-x+2 cos x-6= 0. We are to find an approximation of its root in [1.2] to an absolute error less than 10^-10 with one of the methods covered in class.
Therefore, the correct option is (D)
Let's check the given equation graphically in the given interval i.e [1.2]We can use Newton Raphson method to approximate the root of the equation. Newton Raphson MethodNewton Raphson method is used to find the roots of a differentiable function. Newton Raphson method is based on the following formula:Xn+1 = Xn- f(Xn)/f'(Xn)Where,Xn = Current approximationXn+1 = Next approximationf(Xn) = Function value at Xnf'(Xn) = Derivative of function at XnHere, the given function is ex+2^-x+2 cos x-6= 0.Let's find its derivative:dx/dy (ex+2^-x+2 cos x-6)= ex - 2^-x ln 2 - 2 sin xHere, x = 1.2Taking initial approximation X0 = 1.2
Using the Newton Raphson formula
X1 = X0 - f(X0)/f'(X0)
Putting the values:
f(X0) = e1.2 + 2^-1.2 + 2 cos 1.2 - 6 = -0.287
f'(X0) = e1.2 - 2^-1.2 ln 2 - 2
sin 1.2 = 2.2311 X1 = 1.2 - (-0.287/2.2311) = 1.327091X1 = 1.327091 Now, Let's find the absolute error.Absolute Error = | X1 - X0 |Absolute Error = | 1.327091 - 1.2 | = 0.127091 Since the value of absolute error is greater than 10^-10, we need to perform one more iteration.Using X0 = 1.327091Using the Newton Raphson formula
X2 = X1 - f(X1)/f'(X1)Putting the values:
f(X1) = e1.327091 + 2^-1.327091 + 2 cos 1.327091 - 6 = -0.00000002925f
'(X1) = e1.327091 - 2^-1.327091 ln 2 - 2 sin 1.327091 = 2.225228576X2 = 1.327091 - (-0.00000002925/2.225228576) = 1.3270910564Now, let's find the absolute error. Absolute Error = | X2 - X1 |Absolute Error = | 1.3270910564 - 1.327091 | = 0.0000000564Since the absolute error is less than 10^-10, we can say that the approximation of the root in [1.2] is 1.3270910564.
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
Part 1
Do not include states of matter, multiplication symbols, or extra spaces.
Use brackets [ ] to indicate concentration.
If the concentration of a substance should be "1", then do not include it in the expression.
Complete the K expression for the weak acid behavior represented by
HCOOH(aq)H+(aq)+HCOO−(aq)
Ka =
The given balanced chemical equation can be written in the form of the chemical equilibrium expression, known as the acid dissociation constant or the equilibrium constant (K a). K a expression for HCOOH(aq)H+(aq)+HCOO−(aq) is given below:K a = [HCOO-][H+]/[HCOOH]
The square brackets represent the molar concentration of the species, whereas the value of K a represents the equilibrium constant of the acid dissociation reaction. In the given balanced chemical equation,HCOOH represents the weak acid (acetic acid). The aqueous solution of acetic acid partially dissociates into its ions, hydrogen ions (H+) and acetate ions (HCOO−) as per the following equation: HCOOH(aq)H+(aq)+HCOO−(aq) The K a of acetic acid (HCOOH) is 1.8 × 10⁻⁵ M. The higher the value of K a, the stronger is the acid.
In the given chemical equation, we have to calculate the K a expression for the weak acid behavior represented by the reaction HCOOH(aq)H+(aq)+HCOO−(aq). The K a expression for a weak acid (HA) is given by the equation: K a = [H+][A−]/[HA]Here, we can see that the concentration of water (H2O) is not included in the expression, as water is considered to be constant throughout the reaction. Thus, it is not included in the calculation of K a.In the given balanced chemical equation, HCOOH represents the weak acid (acetic acid), whereas the acetate ion (HCOO−) and hydrogen ion (H+) represent the dissociated products.In the equation given above, we substitute the molar concentration of each ion in the given expression. As the concentration of HCOOH is 1, it is not included in the expression. K a = [HCOO-][H+]/[HCOOH]K a = [HCOO-][H+]/1.
To know more about equation visit:
https://brainly.com/question/29657983
#SPJ11
Draw the structure of each of the following alcohols. Then draw and name the product you would expect to produce by the oxidation of each: 1-nonanol 4-methyl-1-heptanol 4,6-diethyl-3-methyl-3-octanol 5-bromo-4-octanol abyishlafavoreld
The structure of each alcohol is as follows:
1-nonanol: CH3(CH2)7CH2OH
4-methyl-1-heptanol: CH3(CH2)4CH(CH3)CH2OH
4,6-diethyl-3-methyl-3-octanol: (CH3CH2)2CHCH(CH3)CH(CH2)2CH2OH
The expected products upon oxidation would be:1-nonanol: 1-nonanal4-methyl-1-heptanol: 4-methyl-1-heptanal4,6-diethyl-3-methyl-3-octanol: 4,6-diethyl-3-methyl-3-octanalAlcohols are organic compounds that contain a hydroxyl (-OH) group attached to a carbon atom. The structure of each alcohol can be determined by identifying the main carbon chain and the hydroxyl group.
1-nonanol has a nine-carbon chain (nonane) with the hydroxyl group attached to the first carbon. The structure is CH3(CH2)7CH2OH.
4-methyl-1-heptanol consists of a seven-carbon chain (heptane) with a methyl group (CH3) attached to the fourth carbon. The hydroxyl group is attached to the primary carbon, which is the first carbon of the chain. The structure is CH3(CH2)4CH(CH3)CH2OH.
4,6-diethyl-3-methyl-3-octanol has an eight-carbon chain (octane) with two ethyl groups (CH3CH2) attached to the fourth and sixth carbons, respectively. The hydroxyl group is attached to the tertiary carbon, which is the third carbon of the chain. The structure is (CH3CH2)2CHCH(CH3)CH(CH2)2CH2OH.
Upon oxidation of alcohols, the hydroxyl group (-OH) is converted into a carbonyl group (C=O) known as an aldehyde. Therefore, the expected products of oxidation would be aldehydes.
For 1-nonanol, the product of oxidation would be 1-nonanal (CH3(CH2)7CHO).
For 4-methyl-1-heptanol, the product of oxidation would be 4-methyl-1-heptanal (CH3(CH2)4CH(CH3)CHO).
For 4,6-diethyl-3-methyl-3-octanol, the product of oxidation would be 4,6-diethyl-3-methyl-3-octanal [(CH3CH2)2CHCH(CH3)CH(CH2)2CHO].
Learn more about Octanol
brainly.com/question/30026810
#SPJ11
Phosphoric acid, H3PO4, is a triprotic acid. What is the total
number of moles of H+ available for reaction in 1.50 L of 0.500 M
H3PO4?
The total number of moles of H+ available for reaction in 1.50 L of 0.500 M H3PO4 is 2.25 moles of H+.
Phosphoric acid is a triprotic acid, H3PO4. In this acid, three H+ ions can be released. It is referred to as a triprotic acid because it can release three hydrogen ions, as it contains three hydrogen atoms that can ionize. The three hydrogen ions are released one after the other, with the first ionization reaction being the strongest.
Following are the three ionization reactions:
H3PO4(aq) + H2O(l) → H3O+(aq) + H2PO4−(aq)
Ka1 = 7.5 × 10−3H2PO4−(aq) + H2O(l) → H3O+(aq) + HPO42−(aq)
Ka2 = 6.2 × 10−8HPO42−(aq) + H2O(l) → H3O+(aq) + PO43−(aq)
Ka3 = 4.2 × 10−13
It is given that the concentration of H3PO4 is 0.500 M and the volume of H3PO4 is 1.50 L.
Molar mass of H3PO4 = 3 × 1.01 + 30.97 + 4 × 16.00 = 98.00 g mol-1
Number of moles of H3PO4 = Molarity × Volume
= 0.500 M × 1.50 L
= 0.75 moles
Total number of moles of H+ available for reaction = 3 × 0.75 moles = 2.25 moles of H+.
Therefore, the total number of moles of H+ available for reaction in 1.50 L of 0.500 M H3PO4 is 2.25 moles of H+.
To know more about moles visit-
https://brainly.com/question/15209553
#SPJ11
2 In the diagram below, AOD and COE are straight lines. (a) Find the value of x and y.
(b) Find the obtuse angle AOC and reflex angle BOE
Answer:
x = 27.5
y = 21.25
∠AOC = 137.5
∠BOE = 74.5
Step-by-step explanation:
a)
Since AOD is a straight line ,
∠AOE + ∠EOD = 180
⇒ ∠AOE + 5x= 180
⇒ ∠AOE = 180 - 5x - EQ(1)
∠AOB + ∠BOC + ∠COD = 180
⇒ 32 + 188 - 3x + 2y = 180
⇒ 3x - 2y = 40
⇒ x = (40 + 2y) / 3 - EQ(2)
Since COE is a straight line,
∠EOD + ∠DOC = 180
⇒ 5x + 2y = 180
sub x from eq(2)
5((40 + 2y) / 3) + 2y = 180
[tex]\frac{200 + 10y}{3} + 2y = 180\\\\\frac{200 + 10y + 6y}{3} = 180\\\\200 + 16y = 180 *3\\\\16y = 540 - 200\\\\16 y = 340\\\\y = \frac{340}{16}[/tex]
⇒ y = 21.25
sub in eq(2)
x = (40 + 2(21.24)) / 3
[tex]x = \frac{40 + 2(21.25)}{3} \\\\x = \frac{40+42.5}{3} \\\\x = \frac{82.5}{3}[/tex]
x = 27.5
b) ∠AOC = ∠AOB + ∠BOC
= 32 + 188 - 3x
= 220 - 3(27.5)
= 220 - 82.5
∠AOC = 137.5
From eq(1):
∠AOE = 180 - 5x
= 180 - 5(27.5)
= 180 - 137.5
∠AOE = 42.5
∠BOE = ∠AOB + ∠ AOE
32 + 42.5
∠BOE = 74.5