explain why the actual strength of metals is 1 to 2 orders of magnitude lower than their theoretical strength? (2 points):

Answer: The mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.

To determine the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound, use the formula:

mass = molarity x volume x molar mass

First, calculate the number of moles of Na2SO4 present in the solution:

n = M x Vn

= 0.325 mol/L x 0.350 Ln

= 0.11375 mol

Next, calculate the mass of Na2SO4 present in the solution using the molar mass of Na2SO4:

m = n x MMm

= 0.11375 mol x 142.04 g/molm

= 16.154 g

Therefore, the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.



Learn more about solvent dissolution here:

https://brainly.com/question/2364287#



#SPJ11

The heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.

To calculate the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g), we first need to determine the balanced chemical equation for the reaction:
[tex]SO_{2} (g) + 1/2 O_{2}(g)[/tex]  →  [tex]SO_{3}(g)[/tex]
Now, we need to find the limiting reactant. First, let's calculate the moles of each reactant:

moles of [tex]SO_{2}[/tex] = mass of [tex]SO_{2}[/tex] / molar mass of [tex]SO_{2}[/tex]
moles of [tex]SO_{2}[/tex] = 30.0 g / (32.1 g/mol + 32.0 g/mol) = 0.468 moles

moles of [tex]O_{2}[/tex] = mass of [tex]O_{2}[/tex] / molar mass of [tex]O_{2}[/tex]
moles of [tex]O_{2}[/tex] = 20.0 g / 32.0 g/mol = 0.625 moles

Now, we'll find the mole ratio:

mole ratio = moles of [tex]O_{2}[/tex] / (1/2 * moles of [tex]SO_{2}[/tex])
mole ratio = 0.625 / (1/2 * 0.468) = 2.67

Since the mole ratio is greater than 1, [tex]SO_{2}[/tex] is the limiting reactant.

Now, we need to find the heat released. The standard enthalpy change of the reaction (ΔH°) for the formation of [tex]SO_{3}[/tex] is -395.2 kJ/mol. Therefore, the heat released can be calculated as follows:

heat released = moles of limiting reactant * ΔH°
heat released = 0.468 moles * -395.2 kJ/mol = -184.8 kJ

So, the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.

To learn more about heat released; https://brainly.com/question/22862842

#SPJ11

The alcohol that would produce 2,3-dimethylbut-2-ene through dehydration is 2,3-dimethylbutan-2-ol.

Dehydration of an alcohol involves the removal of a molecule of water from the alcohol, resulting in the formation of an alkene. In this case, we are looking for an alcohol that, upon dehydration, will produce 2,3-dimethylbut-2-ene.

The structure of 2,3-dimethylbut-2-ene suggests that it has a branched structure with two methyl groups on the second carbon. This means that the alcohol we need must have this same structure before dehydration.

The alcohol that fits this description is 2,3-dimethylbutan-2-ol. Upon dehydration, this alcohol would lose a molecule of water from the hydroxyl group on the second carbon, resulting in the formation of 2,3-dimethylbut-2-ene. Therefore, the correct answer is 2,3-dimethylbutan-2-ol.

To learn more about methyl groups, refer below:

https://brainly.com/question/13408577

#SPJ11

The moles of potassium chloride needed to make 3M of 0.6L solution is 1.8 moles.

The mole designates 6.02214076×10²³ units, which is a very large number. The number of atoms discovered through experimentation to be present in 12 g of carbon-12 was originally used to define the mole. In honour of the Italian physicist Amedeo Avogadro, the number of units in a mole is also known as Avogadro's number or Avogadro's constant (1776–1856). Equal volumes of gases under identical conditions should contain the same number of molecules, according to Avogadro's hypothesis. This idea helped establish atomic and molecular weights and gave rise to the concept of the mole.

Avogadro's number or Avogadro's constant refers to the quantity of units contained in one mole of any substance. The value is 6.022140857×10²³. Depending on the nature of the reaction and the substance, the units may be electrons, ions, atoms, or molecules.

It links the quantity of substance to the number of particles, bridging the gap between the macroscopic and microscopic worlds.

To know more about Moles, visit:

https://brainly.com/question/26416088

#SPJ1

Strong acids are substances that have a high affinity for protons, meaning that they can donate or accept protons in order to form an acid-base equilibrium. The following substances are strong acids: HF, HI, HCl, H2SO4, HNO3, HBr, HClO, HClO2, HClO3, HClO4, H2S, CH3COOH, H3PO4, NH3, NH4Cl, KOH, FeCl3, H2N2, Ca(OH)2, and CH3NH2.

HF is a hydrogen halide and is the strongest of the acids listed above. It is used in industrial applications as a strong oxidizing agent. HI is another hydrogen halide, and it is used in the production of organic compounds. HCl, also known as hydrochloric acid, is a strong acid that is commonly used in the chemical industry. H2SO4 is a strong mineral acid used in the production of fertilizers and dyes.

HNO3 is a strong oxidizing agent and is used in the production of fertilizers and explosives. HBr is a strong acid used in the production of organic compounds. HClO, HClO2, HClO3, and HClO4 are strong oxidizing agents that are used in the chemical industry.

Know more about Strong acids here:

https://brainly.com/question/16749233

#SPJ11

Calculating the volume of HCl that fully reacted with calcium carbonate, the following steps should be followed:

Step 1: Write the balanced chemical equation for the reaction between HCl and calcium carbonate.

CaCO3 + 2HCl → CaCl2 + CO2 + H2O

Step 2: Calculate the molar mass of CaCO3.CaCO3: 1(40.08) + 1(12.01) + 3(16.00) = 100.09 g/mol

Step 3: Calculate the moles of CaCO3 used.

Mass of CaCO3 used = 0.548 g

Moles of CaCO3 used = 0.548 g / 100.09 g/mol = 0.00548 mol

Step 4: Use the balanced chemical equation to determine the moles of HCl required to react completely with the CaCO3. According to the balanced equation, 2 moles of HCl react with 1 mole of CaCO3.

Therefore, the number of moles of HCl required is:

2 mol HCl/mol CaCO3 × 0.00548 mol CaCO3 = 0.01096 mol HCl

Step 5: Calculate the volume of HCl required to provide this number of moles. The molarity (M) of the HCl solution is given as 0.101 M.

Using the formula for molarity (M = moles of solute/liters of solution), we can rearrange the equation to solve for volume.

The volume of HCl = moles of solute / molarity= 0.01096 mol / 0.101 mol/L = 0.1086 L or 108.6 mL

Therefore, the volume of HCl that fully reacted with the calcium carbonate is 108.6 mL.

Note that this is not the total volume of HCl initially added nor is it the amount needed to neutralize the titrant.

to know more about balanced equation refer here:

https://brainly.com/question/7181548#

#SPJ11

Two assumptions are made in measuring the initial temperature of the metal in a specific heat capacity experiment: (1) the temperature of the water bath is uniform and equal to the temperature recorded by the thermometer, and (2) the heat loss from the hot metal to the surroundings is negligible.

In a specific heat capacity experiment, the metal is heated in a water bath to a known temperature, and then quickly transferred to a container of cool water, where the change in temperature is measured. The initial temperature of the metal is assumed to be equal to the temperature of the water bath, as measured by a thermometer. This assumption relies on the assumption that the temperature of the water bath is uniform, with no temperature gradients.

Another assumption made is that heat loss from the hot metal to the surroundings is negligible. In reality, some heat energy will be transferred from the hot metal to the surrounding air or container, leading to a loss of heat and an inaccurate measurement of the initial temperature. These assumptions can introduce errors in the calculation of the specific heat capacity of the metal, which may affect the accuracy of subsequent calculations.

To know more about specific heat, refer here:

https://brainly.com/question/11297584#

#SPJ11

The molecular geometry of CO₂ is linear, and the molecular geometry of SeH₂ is bent.

The molecular geometry of a molecule is the arrangement of its atoms in space, taking into account the number of atoms, electron pairs, and lone pairs on the central atom. The molecular geometry of a molecule is determined by its bonding, shape, and size.

Molecular geometry is also known as the shape of molecules. CO₂ is a linear molecule with a carbon atom in the center and two oxygen atoms on either side. Each oxygen atom has two non-bonding pairs of electrons, and the carbon atom has no non-bonding electrons. As a result, the molecular geometry of CO₂ is linear.

SeH₂ is a bent molecule with a central selenium atom and two hydrogen atoms. The lone pair of electrons on the selenium atom causes the molecule to be bent, giving it a shape similar to that of water. The molecular geometry of SeH₂ is bent, with a bond angle of approximately 98 degrees.

Learn more about molecular geometry here.https://brainly.com/question/29650255

#SPJ11

The empirical formula of aspirin is C₂H₂O.

Based on the mass percent composition given in the student question, we can find the empirical formula of aspirin. First, assume a 100g sample. This means there are 60g of C, 4.48g of H, and 35.52g of O. Next, convert these masses to moles by dividing by the atomic mass of each element:

C: 60g / 12.01g/mol ≈ 5 moles
H: 4.48g / 1.01g/mol ≈ 4.44 moles
O: 35.52g / 16g/mol ≈ 2.22 moles

Now, divide each mole value by the smallest mole value to find the mole ratio:

C: 5 / 2.22 ≈ 2.25 ≈ 2
H: 4.44 / 2.22 ≈ 2
O: 2.22 / 2.22 ≈ 1

Therefore, the empirical formula of aspirin is C₂H₂O.

Know more about  aspirin    here:

https://brainly.com/question/30764511

#SPJ11

The number of mole of diphosphorous trioxide, P₂O₃ required for the reaction is 0.25 mole

To obtain the number of mole of diphosphorous trioxide, P₂O₃ required, we shall begin by calculating the mole in 41 g of H₃PO₃. This is shown below:

Mole = mass / molar mass

Mole of H₃PO₃ = 41 / 82

Mole of H₃PO₃ = 0.5 mole

Haven obtained the mole of H₃PO₃, we shall determine the number of mole of P₂O₃ required. Details below:

P₂O₃ + 3H₂O -> 2H₃PO₃

From the balanced equation above,

2 moles of H₃PO₃ were obtained from 1 mole of P₂O₃

Therefore,

0.5 mole of H₃PO₃ will be obtain from = (0.5 mole × 1 mole) / 2 mole = 0.25 mole of P₂O₃

Thus, we can conclude that the number of mole of P₂O₃ required is 0.25 mole

Learn more about mole:

https://brainly.com/question/13375719

#SPJ1

0.039 moles of Chalk were used.

To find the number of moles of chalk used, we need to first calculate the change in mass of the chalk:

Change in mass = initial mass - final mass

Change in mass = 43.5 g - 39.6 g

Change in mass = 3.9 g

Next, we need to convert the change in mass to moles of CaCO3:

Molar mass of CaCO3 = 40.08 g/mol + 12.01 g/mol + 3(16.00 g/mol) = 100.09 g/mol

Moles of CaCO3 used = (Change in mass of CaCO3) / (Molar mass of CaCO3)

Moles of CaCO3 used = 3.9 g / 100.09 g/mol

Moles of CaCO3 used = 0.039 moles

Therefore, 0.039 moles of CaCO3 were used.

To know more about moles click here:

brainly.com/question/20486415

#SPJ4

A neutral atom of americium-241 (241Am) contains 95 protons, 146 neutrons, and 95 electrons. This isotope has an atomic number of 95 and an atomic mass of 241.

The protons and neutrons form the nucleus of the atom, which is surrounded by a cloud of electrons.

The number of protons determines the identity of the atom, while the number of neutrons can vary among atoms of the same element.

In americium-241, there are 95 protons and 146 neutrons, making it an isotope.

The electrons of a neutral atom of 241Am are arranged in energy levels or shells that are located around the nucleus.

The first shell, closest to the nucleus, contains 2 electrons, the second shell contains 8 electrons, the third shell contains 18 electrons, and the fourth shell contains 32 electrons.

The total number of electrons for 241Am is 95, which corresponds to the atomic number of 95.

The protons and neutrons in the nucleus are held together by the strong nuclear force. This force is very strong compared to the electrostatic forces that hold the electrons to the nucleus.

The stability of an atom of 241Am is due to the strong nuclear force and the balance of protons and neutrons. The number of protons must match the number of electrons to achieve a balanced state, or a neutral atom.

In americium-241, the atomic number (95) is the same as the number of electrons, which gives it a balanced state.

Americium-241 is a radioactive isotope and has many uses, including smoke detectors. Its stability, atomic number, and subatomic composition all make it an ideal choice for a wide variety of applications.

to know more about americium-241 refer here:

https://brainly.com/question/17558255#

#SPJ11

The partial pressure of gas B in the mixture is 2.49 atm.

To find the partial pressure of gas B in the mixture, we need to use the equation for Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each individual gas.

Mathematically, the equation is:

Total pressure = Partial pressure of gas A + Partial pressure of gas B + ... + Partial pressure of gas N

Where N is the total number of gases in the mixture.

We can rearrange this equation to solve for the partial pressure of gas B:

Partial pressure of gas B = Total pressure - Partial pressure of gas A

Substituting the values given in the question, we get:

Partial pressure of gas B = 4.85 atm - 2.36 atm = 2.49 atm

Therefore, the partial pressure of gas B in the mixture is 2.49 atm.

To know more about pressure click here:

brainly.com/question/15175692

#SPJ4

To summarize, at absolute zero, the energy needed for diffusion to occur is completely absent, and the molecules are completely frozen. So diffusion does not take place.

Diffusion is a process of net movement of molecules from an area of high concentration to an area of low concentration. The process of diffusion requires some form of energy, and at absolute zero, the energy is completely eliminated. This means that there would be no potential for molecules to move from a region of higher concentration to one of lower concentration. Therefore, diffusion does not occur at absolute zero.  At absolute zero, molecules stop vibrating and the atoms cease all motion. All molecular motion is frozen and stopped, so diffusion is not possible. Diffusion requires energy to move molecules, which is not available at absolute zero. The energy needed to drive molecules to move is not present, so molecules cannot move.

Learn more about Diffusion: https://brainly.com/question/94094

#SPJ11

The calculated equilibrium concentration of NH3 is 0.0185 M.

To calculate the equilibrium concentration of NH3 in a mixture of 0.060 M N2 and 0.040 M H2 at a temperature where Kc = 3.5 x 10^-³, we can use the following equilibrium equation:

N2(g) + 3H2(g) ⇌ 2NH3(g)

The balanced equation tells us that for every mole of N2 that reacts, two moles of NH3 will be produced. Similarly, for every three moles of H2 that reacts, two moles of NH3 will be produced. Let's assume that at equilibrium, x moles of NH3 are formed. Then, the equilibrium concentrations of N2, H2, and NH3 will be given as follows:

[NH3] = x M[N2] = (0.060 - x) M[H2] = (0.040 - 3x) M

Now, we can use the equilibrium constant expression (Kc) to solve for x:

Kc = [NH3]2 / [N2][H2]3.5 x 10^-3 = x2 / [(0.060 - x)(0.040 - 3x)3]

On solving the above equation, we get:x = 0.0185 M

Therefore, the equilibrium concentration of NH3 is 0.0185 M.

More on equilibrium concentration: https://brainly.com/question/18366526

#SPJ11

The mass percentage of CaCO₃ in the 3.83 g piece of limestone is 66.8%.

This can be calculated by taking the mass of CaCO₃ (2.57 g) and dividing it by the total mass of limestone (3.83 g) and multiplying by 100.

To calculate this, you need to take the mass of CaCO₃ (2.57 g) and divide it by the total mass of limestone (3.83 g).

This gives you a decimal value, which you then need to multiply by 100 to get the percentage value.

In this case, 2.57/3.83 = 0.668, which multiplied by 100 gives you 66.8%. This is the mass percentage of CaCO₃ in the limestone.

To know more about mass percentage click on below link:

https://brainly.com/question/16885872#

#SPJ11

The relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8. Diffusion is the process of spreading out or scattering a substance, particularly molecules that move randomly inside a fluid or gas.

When substances are dispersed, they shift from areas of high concentration to areas of low concentration. The rate of diffusion determines how quickly or slowly a substance will spread. In a gas or liquid, the molecules diffuse more quickly when the temperature is high.

The ratio of two molecules' diffusion rates is known as the relative rate of diffusion. The relative rate of diffusion can be determined using Graham's law of diffusion. According to this law, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight.

The relative rate of diffusion of two gases can be determined using this law.Let's look at oxygen gas and carbon dioxide now. The molecular weight of oxygen gas is 32 g/mol, while that of carbon dioxide is 44 g/mol.

The relative rate of diffusion can be determined using Graham's law of diffusion:

Relative rate of diffusion of oxygen gas:√(44/32)

Relative rate of diffusion of oxygen gas: 1.2

Relative rate of diffusion of carbon dioxide:√(32/44)

Relative rate of diffusion of carbon dioxide: 0.8

Therefore, the relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8.

To know more about rate of diffusion, refer here:

https://brainly.com/question/2010859#

#SPJ11

When the volume of the reaction mixture is reduced, the reaction will shift in the direction of products. The correct option is (A).

Equilibrium is the state in which the reactants and products of a chemical reaction are in balance. Equilibrium occurs when the forward and reverse reactions of a reversible reaction occur at the same rate.

Le Chatelier's principle is a principle that explains how the equilibrium of a system responds to a change in the system's conditions. It states that if a system at equilibrium is subjected to a change, the system will adjust itself to counteract the change and establish a new equilibrium.

The equilibrium constant will increase, the reaction will shift in the direction of products, and no effect will be observed are all possible effects of reducing the volume of the reaction mixture on the system.

In the given chemical reaction, CuS(s) + O2(g) ↔ Cu(s) + SO2(g), if the volume of the reaction mixture is reduced, it will create an increase in pressure.

As a result, the reaction will move in the direction that produces a smaller number of moles of gas, according to Le Chatelier's principle.

In this reaction, the reactants have two moles of gas, while the products have only one mole of gas. As a result, the reaction will shift in the direction of products, as it results in a lower number of moles of gas.

As a result, the reaction will shift in the direction of products when the volume of the reaction mixture is reduced.

To know more about reaction shift, refer here:

https://brainly.com/question/30827400#

#SPJ11

The volume of the air in the lungs is 4.91 L.

To answer this question, we can use the Ideal Gas Law which is:

PV = nRT

where P = pressure, V = volume, n = number of moles, R = universal gas constant, and T = temperature.

First, we need to rearrange the equation to solve for volume.

Therefore,

V = nRT/P

Where V is the volume, n is the number of moles, R is the universal gas constant and T is the temperature, and P is the pressure.

So the formula for the volume of air in the lungs can be given as:

V = nRT/P = (0.177 mol)(8.31 J/mol*K)(310 K)/(101.3 kPa)

Using this formula and plugging in the values from the problem, we get:

V = (0.177 mol)(8.31 J/mol*K)(310 K)/(101.3 kPa)V

= 4.91 L

So, the volume of the air in the lungs is 4.91 L.

Learn more about air pressure here:

https://brainly.com/question/15189000#

#SPJ11

This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formates]/[formic acid] to be 49.23:1.

Explanation:

To prepare a buffer with a pH of 4.42 using formic acid, you need to determine the ratio of [sodium formate]/[formic acid].

A buffer solution is a solution that can resist changes in pH, even when subjected to acid or base. The buffer solution comprises a weak acid or a weak base with its conjugate base or acid, respectively.

Suppose you want to prepare a buffer with a pH of 4.42 using formic acid, with a Ka of 1.8x10^-4. Find the ratio of [sodium format]/[formic acid]. Here, we can use the Henderson-Hasselbalch equation, which is:

pH = pKa + log ([A-] / [HA])

Here, [A-] represents the conjugate base concentration, and

[HA] represents the weak acid concentration.

Rearranging the above equation gives:

log([A-]/[HA]) = pH - pKa putting values gives:

log([A-]/[HA]) = 4.42 - (-log 1.8x10^-4) lo([A-]/[HA]) = 4.42 + 3.74log([A-]/[HA]) = 8.16log([A-]/[HA]) = 1.74                                                                        

Now, taking antilog of both sides: [A-]/[HA] = 10^1.74[A-]/[HA] = 49.23:1

This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formate]/ [formic acid] to be 49.23:1.

To know more about Formic acid, refer here:

https://brainly.com/question/28169167#

#SPJ11

The first and second ionization of a diprotic acid cannot be treated as completely separate reactions when the reaction is taking place in an environment with a fixed pH.

The second ionization of the acid is dependent on the concentration of the ions produced from the first ionization.

If the pH is fixed, then the concentration of the first ionization is also fixed, so the second ionization will not occur completely independently.

For example, a diprotic acid such as oxalic acid can be completely ionized in two steps. In the first ionization, the hydrogen ions of the oxalic acid are replaced with hydroxide ions, forming the oxalate ion:

H2C2O4 + 2H2O → H3O+ + HC2O4–

In the second ionization, the oxalate ion is further dissociated, forming two separate anions and hydronium ions:

HC2O4– + H2O → H3O+ + C2O4–2

However, in an environment with a fixed pH, the second ionization will not take place as the concentration of oxalate ions from the first ionization is fixed.

Therefore, the two ionizations must be treated together in order to accurately predict the final concentrations of the products.

to know more about diprotic acid refer here:

https://brainly.com/question/9434046#

#SPJ11

Answer:

The first ionization constant is greater than the second ionization constant by only a factor of 10.

Explanation:

The two ionization constants must differ by a factor of at least 20 in order to treat the first and second ionizations as chemically (and mathematically) distinct.

A mole of donuts would weigh 3.42 kg, as a dozen donuts weigh 285 g and a mole is 6.022 x 1023 donuts. To calculate this, you need to multiply the weight of a dozen donuts by the number of donuts in a mole.

First, you need to calculate the weight of a single donut. Since there are 12 donuts in a dozen, divide the weight of a dozen (285 g) by 12 to get the weight of a single donut, which is 23.75 g.

Then, you need to multiply the weight of a single donut (23.75 g) by the number of donuts in a mole (6.022 x 1023) to get the weight of a mole of donuts. This is equal to 3.42 kg.

To know more about mole click below:

https://brainly.com/question/20486415

#SPJ11

Each solution absorbs carbon dioxide from the air, making them slightly more acidic: This is a systematic error, as it affects all the solutions in the same way, leading to a consistent bias in the results.

Estimating the amount of each salt to dissolve in the distilled water: This could be either a random or systematic error, depending on the method used for estimating the amount of salt. If the method is accurate but subject to random variation, then the error is random. If the method consistently overestimates or underestimates the amount of salt, then the error is systematic.

Spilling some salt during the transfer into the centrifuge tube: This is a random error, as it affects only some of the samples and can vary in magnitude from sample to sample. Inconsistent volume in drops of Indicator: This is a random error, as it affects only some of the samples and can vary in magnitude from sample to sample. Using dirty test tubes: This is a human mistake, as it is caused by improper handling of the equipment and can be avoided by following proper laboratory procedures.

To know more about carbon dioxide visit:-

brainly.com/question/3049557

#SPJ1

An electrolyte solution is one that contains ions. The correct option is d.

Learn more about electrolyte solutions: https://brainly.com/question/14654936

#SPJ11

Formic acid (HCOOH), the weak organic acid present in red ants that is responsible again for sting in their bite, with a pH of 2.87 in a 1.35 M solution.

The ph is a useful tool for illustrating how basic or acidic a solution is. By using the inverse logarithm of a hydronium content, or pH = -log[H3O+], we may determine the pH of the solution.

Formic acid has a dissociation constant constant of 1.8 10 4. Formic acid (HCOOH) has a concentration of 0.050 M. [HCOOH] = 0.050 - x, where x is the amount of H+ that separates from HCOOH (formic acid). A 0.050 M strong acid solution has a pH of 2.52.

To know more about organic visit:

https://brainly.com/question/15603370

#SPJ1

The mass of aluminum oxide produced is 152.6 grams.

we need to use the balanced chemical equation for the reaction between aluminum carbide and sodium oxide:

2 Al₄C₃ + 12Na₂O → 8 Al₂O₃ + 6Na₂CO₃

From the equation, we can see that for every 2 moles of Al₄C₃ that react, we get 8 moles of Al₂O₃ as a product. Therefore, we need to convert the given mass of Al₄C₃ to moles, and then use the mole ratio to calculate the mass of Al₂O₃ produced.

First, let's convert the mass of Al₄C₃ to moles:

53.8 g Al₄C₃ × (1 mol Al₄C₃/143.96 g Al₄C₃)

= 0.373 mol Al₄C₃

Now we can use the mole ratio to calculate the moles of Al₂O₃ produced:

0.373 mol Al₄C₃ × (8 mol [tex]Al_{2[/tex][tex]O_{3/2}[/tex] mol Al₄C₃) = 1.492 mol Al₂O₃

Finally, we can convert the moles of Al₂O₃ to grams:

1.492 mol Al₂O₃ × (101.96 g Al₂O₃/mol)

= 152.6 g Al₂O₃

To know more about aluminum oxide here

https://brainly.com/question/9496279

#SPJ4

The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.

The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added can be calculated using the following steps:

1. Calculate the moles of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) before the reaction:

- Moles of CH₃COOH = volume × concentration

= 25.0 mL × 0.365 mol/L

= 9.125 mmol

- Moles of NaOH = volume × concentration

= 10.3 mL × 0.432 mol/L = 4.4456 mmol

2. Determine the moles of acetic acid and sodium hydroxide remaining after the reaction: Since acetic acid and sodium hydroxide react in a 1:1 ratio, the limiting reactant will be NaOH.

- Moles of CH₃COOH remaining = 9.125 mmol - 4.4456 mmol = 4.6794 mmol - Moles of NaOH remaining = 0 mmol (all NaOH is consumed in the reaction)

3. Calculate the concentration of acetic acid and acetate ion (CH₃COO-) after the reaction:

- [CH₃COOH] = moles of CH₃COOH remaining / total volume

= 4.6794 mmol / (25.0 mL + 10.3 mL)

= 0.12998 mol/L

- [CH₃COO-] = moles of NaOH consumed / total volume

= 4.4456 mmol / (25.0 mL + 10.3 mL)

= 0.12346 mol/L

4. Calculate the pH using the Henderson-Hasselbalch equation:

pH = pKa + log([CH₃COO-] / [CH₃COOH]) pKa of acetic acid is 4.76, so:

pH = 4.76 + log(0.12346 / 0.12998) ≈ 4.69

Therefore, the pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.



Learn more about titration here:
https://brainly.com/question/2728613#



#SPJ11

CaCl2 is a salt that forms as the result of ionic bonds. An ionic bond is a bond that forms between a metal and a nonmetal when they react. One of the atoms will be electronegative, while the other will be electropositive.

When an atom is electropositive, it is more likely to give up its electrons, whereas an electronegative atom is more likely to take up an electron or electrons.

A covalent bond is formed between two nonmetal atoms when they react. Unlike an ionic bond, which occurs between a metal and a nonmetal, a covalent bond occurs between two nonmetal atoms.

The electrons are shared in a covalent bond, with each atom receiving one. As a result, both atoms have a stable number of electrons in their outermost shell.

A bond in which one atom is more electronegative than the other and thus attracts electrons more strongly is known as a polar bond.

The positive end of the molecule is the less electronegative end, and the negative end is the more electronegative end.

A hydrogen bond is a weak bond that occurs between a hydrogen atom and an electronegative atom such as nitrogen, oxygen, or fluorine.

Despite being weak, hydrogen bonds are crucial in many biological processes, such as the formation of DNA. When two atoms are identical, the bond between them is nonpolar.

In the case of a covalent bond, this occurs when the two atoms share electrons equally.

to know more about ionic bond refer here:

https://brainly.com/question/11527546#

#SPJ11

The ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.

An ionic bond is an attraction between two oppositely charged ions. They're commonly made up of metals and nonmetals. The metal gives electrons to the nonmetal in an ionic bond, resulting in a complete outer shell for the nonmetal and a full valence shell for the metal. The result is a tightly bound, crystalline structure. The electrostatic interaction between the ions holds the compound together.

Cadmium (Cd) is a metallic element, and sulfide (S) is a nonmetallic element. CdS is an ionic compound that is created when cadmium cations ([tex]Cd^{2+}[/tex]) and sulfide anions ([tex]S^{2-}[/tex]) combine to form a crystalline lattice structure. The ionic charge of cadmium is 2+, while the ionic charge of sulfide is 2-. Hence, the ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.

To know more about ionic bond:

https://brainly.com/question/8286090

#SPJ11

Answer: The maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.

The balanced equation for the reaction is: S8 (s) + 8O2 (g) → 8SO2 (g)

The limiting reactant is the reactant that limits the amount of product formed. To find the limiting reactant, we have to calculate the moles of each reactant. The reactant that produces fewer moles of product is the limiting reactant.

The molar mass of sulfur (S8) is:

Molar mass of S8 = 8 x Atomic mass of S= 8 x 32.07 g/mol= 256.56 g/mol

The molar mass of oxygen (O2) is:

Molar mass of O2 = 2 x Atomic mass of O= 2 x 16.00 g/mol= 32.00 g/mol

The moles of each reactant are:

moles of S8 = 88.0 g ÷ 256.56 g/mol= 0.343 mol

moles of O2 = 88.0 g ÷ 32.00 g/mol= 2.75 mol

From the balanced equation, 1 mole of S8 reacts with 8 moles of O2 to produce 8 moles of SO2.

Therefore, the maximum moles of S8 that can be produced is: Maximum moles of S8 = 0.343 mol

The mass of S8 that can be produced is:

Mass of S8 = number of moles x molar mass= 0.343 mol x 256.56 g/mol= 88.0 g (rounded to one decimal place)

Hence, the maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.

Learn more about reactant here:

https://brainly.com/question/17096236#


#SPJ11