Determine the equation of the circle graphed below 100pts pls

Determine The Equation Of The Circle Graphed Below 100pts Pls

Answers

Answer 1

Answer:

(x + 5)² + (y – 1)² = 25

Step-by-step explanation:

Note that the general equation of a circle is (x – h)² + (y – k)² = r², where (h, k) represents the location of the circle's center, and r represents the length of its radius.

The circle is 10 units in diamater, so the radius is half this: r=10/2=5.

The circle goes from -10 to 0 along the x-axis, so the x-coordinate of its centre is halfway between this: h=(-10+0)/2=-10/2=-5

The circle goes from -4 to 6 along the y-axis, so the y-coordinate of its centre is halfway between this: k=(-4+6)/2=-2/2=1

Now that we know r, h, and k, we can sub these into the general formula to get our equation:

(x - (-5))² + (y – 1)² = 5²

(x + 5)² + (y – 1)² = 25


Related Questions

Consider this equation

1/x-1 = | x-2 |

Using three iterations of successive approximation, what is the approximate solution to the equation? Use the graph as a starting point.

A. x ≈ 43/16

B. x ≈ 21/8

C. x ≈ 41/16

D. x ≈ 19/8

Answers

The approximate solution to the equation 1/x-1 = |x-2| after three iterations of successive approximation is x ≈ 5/2 or x ≈ 2.5.

To solve the equation 1/x-1 = |x-2| using three iterations of successive approximation, we will start with an initial guess and refine it using an iterative process.

Given that the equation involves absolute value, we will consider two cases:

Case 1: x - 2 ≥ 0

In this case, |x-2| simplifies to x-2, and the equation becomes 1/(x-1) = x-2.

Case 2: x - 2 < 0

In this case, |x-2| simplifies to -(x-2), and the equation becomes 1/(x-1) = -(x-2).

Now, let's perform the successive approximation:

Iteration 1:

Let's start with an initial guess, x = 2.

Case 1: When x - 2 ≥ 0,

1/(2-1) = 2-2,

1/1 = 0,

which is not true.

Case 2: When x - 2 < 0,

1/(2-1) = -(2-2),

1/1 = 0,

which is not true.

Since our initial guess did not satisfy the equation in either case, we need to choose a different initial guess.

Iteration 2:

Let's try x = 3.

Case 1: When x - 2 ≥ 0,

1/(3-1) = 3-2,

1/2 = 1,

which is not true.

Case 2: When x - 2 < 0,

1/(3-1) = -(3-2),

1/2 = -1,

which is not true.

Again, our guess did not satisfy the equation in either case.

Iteration 3:

Let's try x = 2.5.

Case 1: When x - 2 ≥ 0,

1/(2.5-1) = 2.5-2,

1/1.5 = 0.5,

which is true.

Case 2: When x - 2 < 0,

1/(2.5-1) = -(2.5-2),

1/1.5 = -0.5,

which is not true.

Our guess of x = 2.5 satisfies the equation in Case 1.

Therefore, the approximate solution to the equation 1/x-1 = |x-2| after three iterations of successive approximation is x ≈ 5/2 or x ≈ 2.5.

for such more question on equation

https://brainly.com/question/27870704

#SPJ8

express 132 base 6 as a number in base five​

Answers

The given number 132 from base 6 to base 10 by expanding its digits using powers of 6. The number 132 in base 6 is equal to 211 in base 5.

To express the number 132 in base 6 as a number in base 5, we need to convert the given number from base 6 to base 10 and then from base 10 to base 5.

In base 6, the digits range from 0 to 5. The positional values of the digits increase from right to left by powers of 6. Let's break down the given number 132 in base 6:

1 * 6^2 + 3 * 6^1 + 2 * 6^0

= 1 * 36 + 3 * 6 + 2 * 1

= 36 + 18 + 2

= 56 in base 10

Now, we have the number 56 in base 10. To convert it to base 5, we divide the number by 5 and record the remainders from right to left until the quotient becomes 0.

56 divided by 5 is 11 with a remainder of 1.

11 divided by 5 is 2 with a remainder of 1.

2 divided by 5 is 0 with a remainder of 2.

The remainders in reverse order give us 211 in base 5.

Therefore, the number 132 in base 6 is equal to 211 in base 5.

In summary, we converted the given number 132 from base 6 to base 10 by expanding its digits using powers of 6. Then, we divided the resulting number in base 10 by 5 to obtain the equivalent number in base 5 by recording the remainders. The final result is 211 in base 5.

For more question on powers visit:

https://brainly.com/question/28782029

#SPJ8

I am trying to figure out how you would read 2.1 as time would it be hours, minutes, or seconds?

Answers

Answer: seconds

Step-by-step explanation:

Juan, standing at one focus of a whispering gallery; is 20 ft from the nearest
wall. His friend is standing at the other focus, 80 ft away. How high is its elliptical
ceiling at the center?
Fill in the blank:
The elliptical ceiling is
ft high at the center.
Give your answer to the nearest whole ft (no decimal places).

Answers

The elliptical ceiling is approximately 30 ft high at the center.

To find the height of the elliptical ceiling at the center, we can use the properties of an ellipse.

In this case, the two foci of the ellipse represent the positions where Juan and his friend are standing.

The distance between the two foci is 80 ft, and Juan is 20 ft away from the nearest wall.

This means that the sum of the distances from any point on the ellipse to the two foci is constant and equal to 80 + 20 = 100 ft.

Since Juan is standing at one focus and the distance to the nearest wall is given, we can determine the distance from Juan to the farthest wall by subtracting the distance to the nearest wall from the sum of the distances.

Distance from Juan to the farthest wall = 100 ft - 20 ft = 80 ft.

The height of the elliptical ceiling at the center is equal to half of the distance between the nearest and farthest walls.

Height of elliptical ceiling = (80 ft - 20 ft) / 2 = 60 ft / 2 = 30 ft.

For similar question on elliptical ceiling.

https://brainly.com/question/31366898  

#SPJ8

pls help me with this!!!!

Answers

Answer:

The equation of a hyperbola with co-vertices at (0, 7) and (0, -7) and a transverse axis that is 12 units long is:

x²/36 - y²/49 = 1.

Therefore, the correct equation is: x²/36 - y²/49 = 1.

write the standard form of the equation of a circle with radius 2 and )-14,-13).

Answers

Answer:

11? I'm so sorry if it's incorrect. I apologize.

What is the difference quotient of the function f(x) = 12x + 1?

Answers

The difference quotient of the function f(x) = 12x + 1 is 12.

The difference quotient of a function measures the average rate of change of the function between two points. To find the difference quotient of the function f(x) = 12x + 1, we can follow these steps:

Select two points on the function, let's call them x and x + h, where h is a small positive value.

Evaluate the function at those two points to get the corresponding y-values. For f(x) = 12x + 1, we have:

f(x) = 12x + 1

f(x + h) = 12(x + h) + 1

Calculate the difference quotient by subtracting the values and dividing by h:

[f(x + h) - f(x)] / h

= [(12(x + h) + 1) - (12x + 1)] / h

= [12x + 12h + 1 - 12x - 1] / h

= (12h) / h

= 12

In this case, since the function is linear with a slope of 12, the difference quotient is constant and equal to the slope of the function. This means that for every unit increase in x, the function f(x) increases by 12.

For such more question on function:

https://brainly.com/question/11624077

#SPJ8

A shop gives an offer saying '20% discount on all products and if your bill amount (after the discount) is more than Rs 1000,
then you will get further discount of 20% on the bill amount).
Aditi buys goods worth Rs 2400 by marking price. What is the amount she needs to pay?

Answers

Answer:

Step-by-step explanation:

To calculate the amount Aditi needs to pay, we need to apply the discounts step by step based on the given offer.

Step 1: 20% discount on all products

The marked price of the goods is Rs 2400. Applying a 20% discount means she will get a reduction of 20% of the marked price.

20% of Rs 2400 = (20/100) * Rs 2400 = Rs 480

After the first discount, the new bill amount is Rs 2400 - Rs 480 = Rs 1920.

Step 2: Additional 20% discount on the bill amount if it exceeds Rs 1000

The new bill amount after the first discount is Rs 1920. If this amount exceeds Rs 1000, Aditi will get a further discount of 20% on this bill amount.

Since Rs 1920 is greater than Rs 1000, we can apply a 20% discount to it.

20% of Rs 1920 = (20/100) * Rs 1920 = Rs 384

The final amount Aditi needs to pay after both discounts is Rs 1920 - Rs 384 = Rs 1536.

Therefore, Aditi needs to pay Rs 1536.

The first three steps in determining the solution set of
the system of equations algebraically are shown.
y=x²-x-3
y=-3x + 5
Step
1
2
3
Equation
x²-x-3=-3x+5
0=x²+
+2x-8
0=(x-2)(x+4)
What are the solutions of this system of equations?
O (-2,-1) and (4, 17)
O (-2, 11) and (4, -7)
O (2, -1) and (-4, 17)
(2, 11) and (-4,-7)

Answers

The solutions of the system of equations are (2, -1) and (-4, 17)

The given system of equations is:

y = x² - x - 3

y = -3x + 5

To find the solutions, we need to solve these equations simultaneously.

Set the equations equal to each other:

x² - x - 3 = -3x + 5

Simplify and rewrite the equation in standard form:

x² - x + 3x - 3 - 5 = 0

x² + 2x - 8 = 0

Factor the quadratic equation:

(x - 2)(x + 4) = 0

Now we can solve for x by setting each factor equal to zero:

x - 2 = 0 or x + 4 = 0

Solving for x, we get:

x = 2 or x = -4

To find the corresponding y-values, we substitute these x-values into either of the original equations. Let's use equation 1):

For x = 2:

y = (2)² - 2 - 3 = 4 - 2 - 3 = -1

For x = -4:

y = (-4)² - (-4) - 3 = 16 + 4 - 3 = 17

As a result, the system of equations has two solutions: (2, -1) and (-4, 17).

The right responses are therefore (2, -1) and (-4, 17).

for such more question on system of equations

https://brainly.com/question/4262258

#SPJ8

How would I find cos?

Answers

When [tex]sin(\theta) = -0.42[/tex] and [tex]\pi < \theta < 3\pi/2[/tex], the value of [tex]cos(\theta)[/tex] is approximately 0.9071.

To find the value of cos([tex]\theta[/tex]) given[tex]sin(\theta) = -0.42[/tex] and [tex]\pi < \theta < 3\pi/2[/tex], we can use the trigonometric identity:

[tex]sin^2(\theta) + cos^2(\theta) = 1[/tex]

Since we are given sin(theta) = -0.42, we can substitute this value into the equation:

[tex](-0.42)^2 + cos^2(\theta) = 1[/tex]

Simplifying:

[tex]0.1764 + cos^2(\theta) = 1[/tex]

Subtracting 0.1764 from both sides:

[tex]cos^2(\theta) = 0.8236[/tex]

Taking the square root of both sides (since cos(theta) is positive):

[tex]cos(\theta) = \sqrt{(0.8236)} \\cos(\theta) = 0.9071[/tex]

Therefore, when [tex]sin(\theta) = -0.42[/tex] and [tex]\pi < \theta < 3\pi/2[/tex], the value of [tex]cos(\theta)[/tex]is approximately 0.9071.

for such more question on value

https://brainly.com/question/27746495

#SPJ8

Combine like terms I need help pls!!!!

Answers

Answer:

21 - 12p

Step-by-step explanation:

I hope this helps and I'm super sorry if I'm wrong!

First apply the distributive property.
7 • -2p and 7 • 3
-14p + 21 + 2p
Then combine like terms
-14 + 2p
-12p + 21

Using a​ t-distribution table or software or a​ calculator, report the​ t-statistic which is multiplied by the standard error to form the margin of error for the following cases: a. 90​% confidence interval for a mean with 8 observations. b. 90​% confidence interval for a mean with 18 observations. c. 99​% confidence interval for a mean with 18 observations.

Answers

a. The t-value is 1.895.

b. The t-value is 1.734.

c. The t-value is 2.898.

To calculate the t-statistic for a confidence interval, we first need to determine the degrees of freedom (df), which depends on the sample size minus one. We can then use a t-distribution table, software, or calculator to find the t-value at the desired confidence level and degrees of freedom.

a. For a 90% confidence interval with 8 observations, the degrees of freedom is 7. Using the t-distribution table or calculator,

b. For a 90% confidence interval with 18 observations, the degrees of freedom is 17. Using the t-distribution table or calculator,

c. For a 99% confidence interval with 18 observations, the degrees of freedom is 17. Using the t-distribution table, software, or calculator,

Note that as the sample size increases, the degrees of freedom increase and the t-value approaches the value of the standard normal distribution for large sample sizes. This means that for large sample sizes, we can use the z-value instead of the t-value in confidence interval calculations.

For such more questions on value

https://brainly.com/question/843074

#SPJ8

determine the value of x​

Answers

Answer:

x = 11.62

Step-by-step explanation:

opp / adj would be tangent, so the equation would be 4*tan(71) giving us 11.616, and rounding to the nearest hundredth gives you 11.62

Hope this helps :)

Jake drives a tractor from one town to another, a distance of 120 kilometers. He drives 6 kilometers per hour faster on the return trip, cutting 1 hour off the time. How fast does he drive each way?

Answers

The speed of Jake's initial trip is x = 24 kilometers per hour, and the speed of the return trip is x + 6 = 30 kilometers per hour.

Let's assume that Jake's speed during the initial trip is represented by "x" kilometers per hour.

On the return trip, he drives 6 kilometers per hour faster, so his speed can be represented as "x + 6" kilometers per hour.

To find the time taken for each trip, we can use the formula Time = Distance / Speed.

For the initial trip, the time taken is 120 kilometers divided by x kilometers per hour, which gives us 120/x hours.

On the return trip, the time taken is 120 kilometers divided by (x + 6) kilometers per hour, which gives us 120/(x + 6) hours.

According to the problem, the return trip takes 1 hour less than the initial trip. So we can set up the equation:

120/x - 1 = 120/(x + 6)

To solve this equation, we can multiply both sides by x(x + 6) to eliminate the denominators:

120(x + 6) - x(x + 6) = 120x

Simplifying this equation:

120x + 720 - x² - 6x = 120x

Combining like terms:

x² + 6x - 720 = 0

Now we can solve this quadratic equation by factoring or using the quadratic formula. By factoring, we find:

(x + 30)(x - 24) = 0

This gives us two potential solutions: x = -30 or x = 24.

Since speed cannot be negative, we discard the solution x = -30.

Therefore, the speed of Jake's initial trip is x = 24 kilometers per hour, and the speed of the return trip is x + 6 = 30 kilometers per hour.

So, Jake drives at a speed of 24 kilometers per hour on the initial trip and 30 kilometers per hour on the return trip.

For similar question on speed.

https://brainly.com/question/29483294  

#SPJ8

cindy bought 7/8 yard of ribbon at a craft store. Jacob bought 4/5 the length of ribbon as Cindy. How many yards of ribbon did Jacob buy?

Answers

Jacob bought 0.7 yards of ribbon.

To find out how many yards of ribbon Jacob bought, we need to determine 4/5 of the length of ribbon that Cindy bought.

Cindy bought 7/8 yard of ribbon. To find 4/5 of this length, we multiply 7/8 by 4/5:

(7/8) * (4/5) = (7 * 4) / (8 * 5) = 28/40

To simplify the fraction, we can divide both the numerator and denominator by their greatest common divisor, which is 4:

(28/4) / (40/4) = 7/10

Therefore, Jacob bought 7/10 yard of ribbon.

However, we can convert this fraction to a mixed number or decimal to express it in yards.

To convert 7/10 to a mixed number, we divide the numerator (7) by the denominator (10):

7 ÷ 10 = 0 with a remainder of 7

So, 7/10 is equivalent to 0 7/10 or 0.7 yards.

Therefore, Jacob bought 0.7 yards of ribbon.

In summary, Jacob bought 7/10 yard or 0.7 yards of ribbon.

For more such questions on yards visit:

https://brainly.com/question/30048343

#SPJ8

please help quick
Which of the following are solutions to the quadratic equation? Check all that
apply.

Answers

The correct solutions to the quadratic equation are:

c. -8

e. 2

To determine the solutions to the quadratic equation 2x^2 + 6x - 10 = x^2 + 6, we need to solve for x.

First, let's simplify the equation by combining like terms:

2x^2 + 6x - 10 - x^2 - 6 = 0

x^2 + 6x - 16 = 0

Now, we can solve this quadratic equation by factoring or by using the quadratic formula.

By factoring:

(x + 8)(x - 2) = 0

Setting each factor equal to zero, we get:

x + 8 = 0 --> x = -8

x - 2 = 0 --> x = 2

So, the solutions to the quadratic equation are x = -8 and x = 2.

Now, let's check the given options:

a. -2: This value is not a solution to the equation.

b. 1/3: This value is not a solution to the equation.

c. -8: This value is a solution to the equation.

d. -1/2: This value is not a solution to the equation.

e. 2: This value is a solution to the equation.

f. 8: This value is not a solution to the equation.

The following are the proper answers to the quadratic equation: c. -8 e.2

for such more question on quadratic equation

https://brainly.com/question/1214333

#SPJ8

Millman’s golfing group is terrific for a group of amateurs. Are they ready to turn pro? Here’s the data. (Hint: Remember that the lower the score [in golf], the better!)

Milkman’s Group: size 9, average score 82, standard deviation 2.6

The pros: size 500, average score 71, standard deviation 3.1

Answers

Based on the average scores and standard deviations, it appears that Millman's group still has room for improvement before they can reach the level of professional golfers.

To determine whether Millman's golfing group is ready to turn pro, we can compare their performance to that of professional golfers. Based on the provided data, Millman's group consists of 9 amateurs with an average score of 82 and a standard deviation of 2.6.

On the other hand, the professional golfers consist of 500 individuals with an average score of 71 and a standard deviation of 3.1.

To make a meaningful comparison, we can look at the average scores of the two groups. The average score is an indicator of the overall performance, with lower scores being better in golf.

In this case, the professional golfers have an average score of 71, while Millman's group has an average score of 82. This suggests that the professional golfers perform better, on average, than Millman's group.

However, it is also essential to consider the standard deviation, which measures the variability of scores within each group. A smaller standard deviation indicates less variation and greater consistency in performance.

The professional golfers have a standard deviation of 3.1, while Millman's group has a standard deviation of 2.6. This suggests that Millman's group has slightly less variation in scores compared to the professional golfers.

Overall, based on the average scores and standard deviations, it appears that Millman's group still has room for improvement before they can reach the level of professional golfers.

The professional golfers demonstrate better performance, on average, and a slightly higher variability in scores compared to Millman's group. Therefore, it would be advisable for Millman's group to continue refining their skills and striving to improve their scores before considering turning pro.

For more such question on standard deviations visit:

https://brainly.com/question/475676

#SPJ8

Place point Q on the graph to indicate an unemployment rate of 100 percent, point R to indicate full employment, and point S to indicate where the U.S. economy usually operates.

Answers

In a Production Possibility Curve (PPC) with product output Y on the vertical axis and product output X on the horizontal axis the following points are described as follows.

Explanation for PPC

- Point Q represents an unemployment rate of 100 percent. It is located at the origin, where both axes intersect, indicating no product output due to complete unemployment.

- Point R signifies full employment and is located at the maximum product output on the X-axis, showing the economy's capacity when all resources are fully utilized.

- Point S indicates where the US economy typically operates, within the usual range of product output levels on the X-axis, reflecting a balanced unemployment rate that includes frictional and structural unemployment.

Learn more about PPC:
https://brainly.com/question/28193924
#SPJ1

Find the area of the triangle below.
Be sure to include the correct unit in your answer.
15 ft
5 ft
22 ft

Answers

You need to say what is the base and what’s the height then I can answer

Answer:

What is the base, height? Is it a right triangle?

What is the total amount and the amount of interest earned on $6,500 at 6% for 25 years?
Total Amount Interest Amount
compounded annually
compounded semiannually
compounded quarterly
V

Answers

Answer:

The total amount with annual compounding is 23,304.79 .

The interest with annual compounding is $18,304.79.

The total amount with semi annual compounding is 24,005.10.

The interest with semi annual compounding is $19,005.10.

The total amount with quarterly compounding is 24,377.20.

The interest with quarterly compounding is $19,377.20.

What are the total amount and interest?

The formula for determining the total amount is:

FV = PV(1 + r/m)^nm

Where:

FV =total amount

PV = amount deposited

r  = interest rate

n  = number of years

m = number of compounding

Interest = FV - amount deposited

FV = 5000 x (1.08)^20 = 23,304.79

Interest = 23,304.79 - 5000 = $18,304.79

FV =5000 x (1.08/2)^(2 x 20) =24,005.10

Interest = 24,005.10 - 5000 = $19,005.10

FV =5000 x (1.08/4)^(20 x 4) =24,377.20

Interest = 24,377.20 - 5000 = $19,377.20

Step-by-step explanation:

3. The numbers of activities that students in two
classes participate in are shown below.
Class M
0
0
1
2
2
+
3
4 5
Number of Activities
Class N
:
+
6
3
4
Number of Activities
5
6
+
7
7
+
8 9
+
8
9
Which statement is correct?
A The distribution for Class M is approximately
symmetric.
B The distribution for Class M has at least one
outlier.
The median number of activities for Class N
is less than for Class M.
D The spread of the number of activities for
Class N is less than for Class M.

Answers

The statement that is correct option d: The spread of the number of activities for Class N is less than for Class M.

The term 'spread' in mathematics refers to the difference between the largest and smallest values in a dataset or the range of the data. It's the extent to which the dataset is spread out.The median is the center of a dataset. It's the number that lies in the middle of the sorted values. Half the values are greater than the median, while the other half are lesser than the median.

An outlier is a value that is very different from the other values in the dataset.In class M, there are no outliers. The distribution is skewed to the right since most students have only a few activities, and some have many. The median is between 2 and 3.

In class N, there are no outliers. Most students have a moderate number of activities, and the spread is less than in Class M. The median is between 5 and 6.Hence, the correct statement is The spread of the number of activities for Class N is less than for Class M.The correct answer is d

Know more about   dataset  here:

https://brainly.com/question/28168026

#SPJ8

what is the value of x in the triangle

Answers

Answer:

7

Step-by-step explanation:

In an 30-60-90 right triangle, the longer leg is the shorter leg multiplied by [tex]\sqrt{3}[/tex]

So [tex]7\sqrt{3} =x*\sqrt{3[/tex]

[tex]7=x[/tex]

x=7

Answer:

A. 21

Step-by-step explanation:

This is a 30-60-90 triangle, where you have one 30° angle, one 60°, and one 90° (aka right) angle.  

The sides of a 30-60-90 triangle adhere to the following rules:

The side opposite the 30° angle is the shortest side and we can call its length "x".The side opposite the 60° angle is the medium length side and its length is given by x * √3.  This means its length is the product of the length of the side opposite the 30° angle and √3.The side opposite the 90° (right) angle is the longest side (aka the hypotenuse) and its length is given by 2x.  This means its length is twice the length of the side opposite the 30° angle.

Since 7√3 is the length of the side opposite the 30° angle, the entire expression represents x.

Since the length of the side opposite the 60° angle is given by x * √3, the length of this side is (7√3)(√3).

Simplifying gives us 7*3, which is 21.

Thus, the value of x in the triangle is 21 (answer choice A.)

what is the answer and how do I figure it out ​

Answers

Answer:

[tex]\frac{3}{7}[/tex] <  [tex]\frac{3}{5}[/tex]

Step-by-step explanation:

[tex]\frac{3}{7}[/tex] ? [tex]\frac{3}{5}[/tex]

We have to get both fractions with the same denominator to compare them.

[tex]\frac{3}{7}[/tex] = [tex]\frac{15}{35}[/tex]

[tex]\frac{3}{5}[/tex] = [tex]\frac{21}{35}[/tex]

[tex]\frac{15}{35} < \frac{21}{35}[/tex]

So, [tex]\frac{3}{7}[/tex] <  [tex]\frac{3}{5}[/tex]


Describe a sequence of transformations that maps quadrilateral MATH onto quadrilateral
M"A"T"H".

Answers

A sequence of transformations that maps quadrilateral MATH onto quadrilateral M"A"T"H" is a rotation of 180° about the origin and a translation by 1 unit left and 1 unit up.

What is a rotation?

In Mathematics and Geometry, the rotation of a point 180° about the origin in a clockwise or counterclockwise direction would produce a point that has these coordinates (-x, -y).

Additionally, the mapping rule for the rotation of a geometric figure 180° counterclockwise about the origin is given by this mathematical expression:

(x, y)                                            →            (-x, -y)

Coordinates of point M (2, 4)  →  Coordinates of point M' = (-2, -4)

By applying a translation to the image (M') vertically upward by 1 unit and horizontally left by 1 unit, the new coordinate M" of quadrilateral M"A"T"H" include the following:

(x, y)                               →                  (x - 1, y + 1)

M' (-2, -4)                        →                  (-2 - 1, -4 + 1) = M" (-3, -3)

Read more on rotation here: brainly.com/question/28515054

#SPJ1

what does a fraction that is horizontally compressed versus vertically compressed look like?

Answers

Answer:

Fractions are like pancakes: you can flatten them horizontally or vertically. Horizontal flattening means you shrink the x-value by multiplying it by a huge number before doing anything else. Vertical flattening means you squish the y-value by multiplying the whole function by a tiny number. For example, if f (x) = x^2, then f (2x) is horizontally flattened by 2 and f (0.5x^2) is vertically flattened by 0.5. Don't worry, it's not rocket science, it's just math.

Question 1 (1 point)
Caroline wants to create a helix shape by using the screw modifier. Unfortunately,
when she tries the screw modifier, it keeps spinning her model around an axis
without any vertical movement. What does she need to change to get the vertical
movement that will give it a helix-like shape?
Screw option needs to be set to something greater than 0.
Screw option needs to be set to 0.
Screw option needs to be set to something less than 0.
Screw option needs to be turned off.
Question ? (1 point) ✓ Saved

Answers

The correct answer is Screw option needs to be set to something greater than 0.

To get the vertical movement and create a helix-like shape using the screw modifier, Caroline needs to change the screw option to something greater than 0.

The screw option determines the amount of vertical displacement or height of the helix shape.

By setting the screw option to a value greater than 0, Caroline can control the vertical movement of the model as it spirals along the axis, resulting in a helix-like shape.

Therefore, the correct answer is:

Screw option needs to be set to something greater than 0.

for such more question on vertical movement

https://brainly.com/question/9201543

#SPJ8

How much money has to be invested at 2.9% interest compounded
continuously to have $34,000 after 18 years?
A. $20,173.31
B. $20,211.34
C. $20,249.07
D. $20,186.02

Answers

Answer:

None of the given options (A, B, C, D) match the correct investment amount.

Explaination:

A = P * e^(rt),

where:

A = the future amount (in this case, $34,000),

P = the principal amount (the initial investment),

e = Euler's number (approximately 2.71828),

r = the interest rate (2.9% expressed as a decimal, so 0.029),

t = the time period (18 years).

We can rearrange the formula to solve for P:

P = A / e^(rt).

Now we can plug in the given values and calculate the investment amount:

P = $34,000 / e^(0.029 * 18).

Using a calculator, we can evaluate e^(0.029 * 18) and divide $34,000 by the result to find the investment amount.

Calculating e^(0.029 * 18) gives us approximately 1.604.

P = $34,000 / 1.604 ≈ $21,179.55

What is the surface area of a triangular with 6, 7cm 4cm 12cm

Answers

The surface area of the given triangle is approximately 33.74 square centimeters.

To calculate the surface area of a triangle, we need the lengths of two sides and the included angle between them. However, in this case, you provided the lengths of all three sides (6 cm, 7 cm, and 12 cm).

To determine the surface area, we can use Heron's formula, which is applicable to triangles with all three side lengths known.

Heron's formula states that the surface area (A) of a triangle with side lengths a, b, and c is given by:

[tex]A = \sqrt(s \times (s - a) \times (s - b) \times (s - c))[/tex]

where s is the semi perimeter of the triangle, calculated as:

s = (a + b + c) / 2

Plugging in the given side lengths, we have:

s = (6 cm + 7 cm + 12 cm) / 2 = 25 / 2 = 12.5 cm

Now we can substitute the values into Heron's formula:

[tex]A = \sqrt(12.5 cm \times (12.5 cm - 6 cm) \times (12.5 cm - 7 cm) \times (12.5 cm - 12 cm))[/tex]

[tex]= \sqrt(12.5 cm \times 6.5 cm \times 5.5 cm \times 0.5 cm)[/tex]

= √(1137.5 cm^4)

≈ 33.74 cm^2

For more such questions on triangle

https://brainly.com/question/1058720

#SPJ8

point D i ain’t the interior of ABC . what is m/ DBC

Answers

Answer:

36.5°

--------------------------------

Angles ABD and DBC form a linear pair, hence their sum is 180°.

Set up an equation and solve for x:

3x + 22 + x - 4 = 1804x + 18 = 1804x = 162x = 40.5

Substitute 40.5 for x and find the measure of ∠DBC:

m∠DBC = 40.5 - 4 m∠DBC = 36.5

Determine the percentile of 6.2 using the following data set.
4.2 4.6 5.1 6.2 6.3 6.6 6.7 6.8 7.1 7.2
Your answer should be an exact numerical value.
The percentile of 6.2 is |
%.

Answers

The percentile of 6.2 in the given data set is 40%.

To determine the percentile of 6.2 in the given data set, we can use the following steps:

Arrange the data set in ascending order:

4.2, 4.6, 5.1, 6.2, 6.3, 6.6, 6.7, 6.8, 7.1, 7.2

Count the number of data points that are less than or equal to 6.2. In this case, there are 4 data points that satisfy this condition: 4.2, 4.6, 5.1, and 6.2.

Calculate the percentile using the formula:

Percentile = (Number of data points less than or equal to the given value / Total number of data points) × 100

In this case, the percentile of 6.2 can be calculated as:

Percentile = (4 / 10) × 100 = 40%

The percentile of 6.2 in the sample data set is therefore 40%.

for such more question on percentile

https://brainly.com/question/24877689

#SPJ8

Other Questions
Problem 3 (25%). Find the homogenous linear differential equation with constant coefficients that has the following general solution: y=ce-X + Cxe-5x Q2: Illustrate how we can eliminate inconsistency from a relation (table) using the concept of normalization? Note: You should form a relation (table) to solve this problem where you will keep insertion, deletion, and updation anomalies so that you can eliminate (get rid of) the inconsistencies later on by applying normalization. 5 Sodium-24 (24Na) is a radioisotope used to study circulatory dysfunction. A measurement found 4 micrograms of 24Na in a blood sample. A second measurement taken 5 hrs later showed 3.18 micrograms of 24Na in a blood sample. Find the half-life in hrs of 24Na. Round to the nearest tenth.___Hours Consider the isothermal gas phase reaction in packed bed reactor (PBR) fed with equimolar feed of A and B, i.e., CA0 = CB0 = 0.2 mol/dm A + B 2C The entering molar flow rate of A is 2 mol/min; the reaction rate constant k is 1.5dm%/mol/kg/min; the pressure drop term a is 0.0099 kg. Assume 100 kg catalyst is used in the PBR. 1. Find the conversion X 2. Assume there is no pressure drop (i.e., a = 0), please calculate the conversion. 3. Compare and comment on the results from a and b. y+y=2u(t3);y(0)=0,y(0)=1 Click here to view the table of Laplace transforms Click here to view the table of properties of Laplace transforms. Solve the given initial value problem. y(t)= Sketch the graph of the solution. In _________, machines are designed to do multiple tasks so that they can produce a variety of products.Question 8 options:systems engineeringmicrodesignmodular constructionflexible manufacturing A sample of dry, cohesionless soil was subjected to a triaxial compression test that was carried out until the specimen failed at a deviator stress of 105.4 kN/m^2. A confining pressure of 48 kN/m^2 was used for the test.a). calculate the soil's angle of internal friction.b). calculate the normal stress at the failure plane.. In a population of wolves, the birth rate is 4, the death rate is 3, immigration is 2, and emigration is 3. Calculate the population growth by filling in the formula below.( + ) ( + ) = Since the population growth is ,the population is . expect Coolibah's stock to sell for at the end of three years? A. $29.62 B. $28.38 C. $24.68 D. $27.15 Write a function load_metrics(filename) that given filename (a string, always a csv file with same columns as given in the sample metric data file), extract columns in the order as follows: 1. created_at 2. tweet_ID 3. valence_intensity 4. anger_intensity 5. fear_intensity 6. sadness_intensity 7. joy_intensity 8. sentiment_category 9. emotion_category The extracted data should be stored in the Numpy array format (i.e., produces ). No other post-processing is needed at this point. The resulting output will now be known as data. Note: when importing, set the delimiter to be ''' (i.e., a comma) and the quotechar to be (i.e., a double quotation mark). For example: Test Result data = load_metrics("mini_covid_sentiment_metrics.csv") ['created_at' 'tweet_ID print(data[0]) 'fear_intensity' 'sadn 'emotion_category'] For example: Result sv") ['created_at' 'tweet_ID' 'valence_intensity' 'anger_intensity' 'fear_intensity' 'sadness_intensity' 'joy_intensity' 'sentiment_category' 'emotion_category'] The Numpy array you created from task 1 is unstructured because we let NumPy decide what the datatype for each value should be. Also, it contains the header row that is not necessary for the analysis. Typically, it contains float values, with some description columns like created_at etc. So, we are going to remove the header row, and we are also going to explicitly tell NumPy to convert all columns to type float (i.e., "float") apart from columns specified by indexes, which should be Unicode of length 30 characters (i.e., " Classifying PropertiesFor each property listed, identify the type of element it describes.Very good electrical conductivity:Amphoteric, able to form acidic OR basic compounds:Gaseous at room temperature:Solid at room temperature:Brittle: The change in enthalpy will always be negative under which conditions? A. The change in enthalpy actually can never be negative B. The internal energy increases and the volume increases C. The internal energy decreases and the volume increases D. The internal energy decreases and the volume decreases E. The internal energy increases and the volume decreases Topic: Looking around: D&S Theory as Evidenced in a Pandemic News Article Description: In this reflection you are to find a news article from the pandemic on the web that has some connection to Canada. The goal will be to analyse the change in demand and/or supply of a good/service during the pandemic. Read the article and address the following questions/discussion points: 1. Briefly summarize the article and make note about how your article connects with the theory of supply and demand. 2. Based on the article, what kind of shift or movement along the demand and/or supply curve would be expected? Make sure to explain your reasoning and draw a Demand and Supply graph with the changes shown. Also, address the change in equilibrium price and quantity. 3. How, in the limited amount of economics we have covered thus far, has your perspective on how the economy works changed? Include either a copy of your article in your submission, or a hyperlink embedded in your submission for your professor to access the article. Your reflection should be between 250 and 300 words or one page double spaced, 11 or 12 pt font. Do you think that you understand this concept of moral status? What is hard about it? Do you understand what possible defects there are for any suggested criteria for moral status, and why this makes it so hard to come up with a satsfictory theory of moral status? What is your moral analysis of the abortion subject? [Legally, there are some other issues, of course: constitutionality, enumerated constitutional rights, federalism - having to do with what decisions devolve onto the states - and also a recurrent issue is: should it be up to the courts or is it something that should be decided legislatively? We don't look into those subjects in this course. The issue is preponderantly moral - see recent opinion for majority: the moral aspect of the subject is highlighted by the justice who delivered the majority opinion.] PILOT(pilotnum, pilotname, birthdate, hiredate) FLIGHT(flightnum, date, deptime, arrtime, pilotnum, planenum) PASSENGER(passnum, passname, address, phone) RESERVATION(flightnum, date, passnum, fare, resvdate) AIRPLANE(planenum, model, capacity, yearbuilt, manuf) Write SQL SELECT commands to answer the following queries. (i) Find the records for the airplanes manufactured by Boeing. (1.5 marks) (ii) How many reservations are there for flight 278 on February 21, 2004? (iii) List the flights on March 7, 2004 that are scheduled to depart between 10 and 11AM or that are scheduled to arrive after 3PM on that date. (2.5 marks) (iv) How many of each model of Boeing aircraft does Grand Travel have? (v) List the names and dates of hire of the pilots, who flew Airbus A320 aircraft in March, 2004. (3.5 marks) (vi) List the names, addresses, and telephone numbers of the passengers who have reservations on Flight 562 on January 15, 2004. (2.5 marks) (vii) List the Airbus A310s that are larger (in terms of passenger capacity) than the smallest Boeing 737s. (7) Rank the following functions from lowest to highest asymptotic growth rate. n^2, In(n), (ln(n))2, In(n2), n ln(n), n, nn, In(ln(n)), 2^ln(n), 2^n, 2^3n, 3^2n ) Recording Entries for Equity Investment: FV-NI and Equity Method On January 1, Allen Corporation purchased 30% of the 42,000 outstanding common shares of Towne Corporation at $17 per share as a long-term investment. On the date of purchase, the book value and the fair value of the net assets of Towne Corporation were equal. During the year, Towne Corporation reported net income of $33,600 and declared and paid dividends of \$11,200. As of December 31, common shares of Towne Corporation were trading at $20 per share. Journal Entries without Significant Influence a. Assume that Allen Corporation had significant influence over Towne Corporation. Prepare the entries to record the purchase of the investment, the receipt of declared dividends, and the proportionate share of net income. b. Assume that Allen Corporation did not have significant influence over Towne Corporation. Record the entries to record the purchase of the investment, the receipt of declared dividends, and the fair value adjustment. c. Indicate the amount of income that would be reported on the income statement and the investment balance on the year-end balance sheet under requirement (a) and requirement (b). Four identical charges (+1.8 C each) are brought from infinity and fixed to a straight line. Each charge is 0.37 m from the next. Determine the electric potential energy of this group. Number Units The first Duma was formed in Russia as an elected legislative body - a step toward representation in government. How did this impact Russian government?A.The czar allowed the Duma's exercises in law making but retained his power.B.The Duma became the basis for the anti-czarist movement.C.The czar still maintained all control and power; the Duma lasted 73 days.D.The czar shared power with the Duma, allowing laws to be made through this body. The following decimal values are to be stored as floating-point binary in a 32-bit registers with 23 bits for the mantissa and 8 bits for the exponent. The exponents are stored using Excess 127 representations. Write the contents of the registers in binary. 101.25, "-12.75," 120.5, "-87.25"