Engineering High School

Complete the tables in 1.1 and 1.2 below. Show your calculations on a separate sheet and attach it to your portfolio. Input values (x) 1 (5) y = 2x - 10 2 3 4 5​

Answers

Answer 1

To complete the tables, substitute the given input values of x into the equation y = 2x - 10 and calculate the corresponding values of y.

To complete the tables for the equation y = 2x - 10, follow these steps:

Start with the given input values of x: 1, 2, 3, 4, and 5.

Substitute each value of x into the equation y = 2x - 10.

Perform the calculations to find the corresponding values of y for each x value.

For x = 1: y = 2(1) - 10 = -8

For x = 2: y = 2(2) - 10 = -6

For x = 3: y = 2(3) - 10 = -4

For x = 4: y = 2(4) - 10 = -2

For x = 5: y = 2(5) - 10 = 0

Fill in the calculated values of y in the respective "y" column for each x value in tables 1.1 and 1.2.

Table 1.1:

x y

1 -8

2 -6

3 -4

4 -2

5 0

Table 1.2:

x y

1 -8

5 0

By substituting the given x values into the equation and calculating the corresponding y values, you can complete the tables accurately. Remember to include your calculations on a separate sheet and attach it to your portfolio for documentation.

For more such question on Equation

https://brainly.com/question/29174899

#SPJ8

Related Questions

It is urgent! Can you solve this equation by power series method?

dy/dx=[tex]0.2x^{2}+y[/tex]

I have 35min to deliver the answer and I don't know how to do it.

Answers

Answer:

yes

Explanation:

Yes, I can solve this equation by power series method. Here are the steps:

Assume a power series solution of the form. [tex]y = \sum_{n=0}^{\infty} a_n x^n[/tex]Differentiate term by term to get [tex]y' = \sum_{n=1}^{\infty} n a_n x^{n-1}[/tex]Substitute into the equation and simplify to get [tex]$$\sum_{n=1}^{\infty} n a_n x^{n-1} = 2 \sum_{n=0}^{\infty} a_n x^{n+2} + \sum_{n=0}^{\infty} a_n x^n$$[/tex]

Re-index the sums to have the same power of x and combine them to get                                              [tex]$$\sum_{n=0}^{\infty} [(n+1) a_{n+1} - 2 a_n x^2 - a_n] x^n = 0$$[/tex]

Equate the coefficients of each power of x to zero and solve for the recurrence relation [tex]$$a_{n+1} = \frac{2 a_n x^2 + a_n}{n+1}$$[/tex]

Use the initial conditions [tex]$y(0) = a_0$[/tex] and [tex]$y'(0) = a_1$[/tex] to find the values of [tex]$a_0$[/tex] and [tex]$a_1$[/tex]

Substitute the values of [tex]$a_0$[/tex] and [tex]$a_1$[/tex] into the recurrence relation and find the values of [tex]a_2[/tex],[tex]a_3[/tex], etc.

Write the solution as [tex]$$y = \sum_{n=0}^{\infty} a_n x^n$$[/tex]

[tex]For example, if we have $y(0) = 1$ and $y'(0) = 2$, then we get $a_0 = 1$ and $a_1 = 2$. Then we can find $a_2$, $a_3$, etc. by using the recurrence relation:a_2 = \frac{2 a_1 x^2 + a_1}{2} = \frac{5}{2}x^2a_3 = \frac{2 a_2 x^2 + a_2}{3} = \frac{25}{12}x^4a_4 = \frac{2 a_3 x^2 + a_3}{4} = \frac{125}{96}x^6[/tex]

The solution is then [tex]y = 1 + 2x + \frac{5}{2} x^{2} + \frac{25}{12} x^{4} +\frac{125}{96} x^{6}+...[/tex]

To solve the differential equation using the power series method, we can assume a power series representation for the function \(y(x)\) as:

\[y(x) = \sum_{n=0}^{\infty} a_n x^n\]

Let's differentiate this series with respect to \(x\):

\[\frac{dy}{dx} = \sum_{n=0}^{\infty} a_n n x^{n-1} = \sum_{n=0}^{\infty} a_n (n+1) x^n\]

Substituting this into the given differential equation, we get:

\[\sum_{n=0}^{\infty} a_n (n+1) x^n = 0.2x^2 + \sum_{n=0}^{\infty} a_n x^n\]

Comparing the coefficients of like powers of \(x\) on both sides, we have:

For the left side:
\(a_0\) term: \(a_1 = 0.2a_0\)
\(a_1\) term: \(2a_2 = 0.2a_1 + a_0\)
\(a_2\) term: \(3a_3 = 0.2a_2 + a_1\)

And so on. We can use these recurrence relations to find the values of the coefficients \(a_n\) one by one.

To get started, let's determine the first few coefficients:

\(a_1 = 0.2a_0\)

\(2a_2 = 0.2a_1 + a_0\)

\(3a_3 = 0.2a_2 + a_1\)

Once we have determined the values of \(a_0\), \(a_1\), \(a_2\), and \(a_3\), we can continue the process to find more coefficients using the recurrence relations.

I recommend using a computer algebra system or a software package such as MATLAB or Mathematica to automate this process and calculate the coefficients efficiently. It might be challenging to complete this calculation manually within the given time frame of 35 minutes.

What was the most technologically advanced car in the 90's

Answers

Answer:

There were several technologically advanced cars in the 1990s, including the Mitsubishi 3000GT, Porsche 959, and Williams FW15C Formula One car. It is difficult to determine a single car as the "most technologically advanced" since advancements varied across different models and manufacturers. However, the 1993 Williams FW15C is often considered one of the most technologically advanced Formula One cars of all time , featuring advanced electronics, active suspension, and advanced aerodynamics. Additionally, the 90s were a golden decade for technologically advanced Japanese cars , including iconic models like the Nissan Skyline GT-R and Toyota Supra.

Explanation:

Answer:

While there were many advanced cars in the 90's the McLaren F1 was one of the most technologically advanced cars in the '90s.

Hope this helps:))

What is the first thing you should do after retrieving a boat onto a trailer?

A.) Transfer all gear from the boat to the vehicle
B.) Check that the trailer lights are working
C.) Secure any items that are loose in the boat
D.) Pull the trailer well away from the boat ramp

Answers

Answer:

D.) Pull the trailer well away from the boat ramp

Explanation:

After retrieving a boat onto a trailer, the first thing you should do is move the trailer away from the boat ramp to allow other boaters to use the ramp. This helps maintain a smooth flow of traffic and prevents congestion. Once the trailer is in a safe location, you can then secure the boat to the trailer using straps or tie-downs. After securing the boat, you can proceed with other tasks such as transferring gear from the boat to the vehicle, checking trailer lights, and securing any loose items within the boat.

The first thing you should do after retrieving a boat onto a trailer is to pull the trailer well away from the boat ramp. Therefore option D is correct.

After retrieving a boat onto a trailer, the first thing you should do is pull the trailer well away from the boat ramp. This is important for several reasons:

1. Safety: Pulling the trailer away from the boat ramp ensures that you are not blocking the ramp, allowing other boaters to access the water. It helps maintain a smooth flow of traffic and prevents congestion and delays at the ramp.

2. Courtesy: By promptly moving the trailer away from the boat ramp, you show consideration for other boaters who may be waiting to launch or retrieve their boats. It is good boating etiquette to minimize the time spent at the ramp to allow others to use it efficiently.

3. Parking: Moving the trailer away from the ramp provides you with the opportunity to find a suitable parking spot for your trailer and vehicle.

It allows you to safely and securely park your trailer in an appropriate designated area, ensuring it is not obstructing traffic or creating any hazards.

Know more about retrieving a boat:

https://brainly.com/question/3937416

#SPJ2


A company has the goal of developing technology to remove carbon dioxide
from the atmosphere. Its design team is making a model based on one
possible solution to the problem. Which step of the engineering design
process comes next?

Answers

Answer: The next step in the engineering design process would be to create a prototype of the model and test it to see how well it works.

What is the proper technique for anchoring?

A.) From the bow
B.) Over the port side
C.) Over the stern
D.) From the starboard quarter

Answers

From the Bow

Head slowly into the wind or current to a position upwind it up current of where you actually want to end up

Which of the following is recommended as part of the annual maintenance program for a gasoline-powered boat?

A) Change the spark plugs with automotive plugs and check spark distance
B.) Drain and check bilge along with topping off the anti-freeze level
C.) Calibration and re-installation of an automotive-type fuel pump
D.) Examination of thru-hull fittings for signs of leakage or corrosion

Answers

The most recommended choice as part of the annual maintenance program for a gasoline-powered boat would be option D) Examination of thru-hull fittings for signs of leakage or corrosion.

Thru-hull fittings are essential components of a boat's plumbing system.

They are responsible for allowing water to enter or exit the boat for various purposes such as cooling, bilge pumping, or livewell circulation.

Regular inspection of thru-hull fittings is crucial to ensure their integrity and functionality.

Examining thru-hull fittings for signs of leakage or corrosion is important for several reasons.

Firstly, leaks in thru-hull fittings can lead to water ingress, which can cause damage to the hull, electrical systems, or equipment onboard.

Detecting leaks early on can help prevent further damage and potential sinking of the boat.

Secondly, corrosion can weaken the fittings over time, compromising their structural integrity.

Corroded thru-hull fittings may fail, leading to water intrusion or even loss of the fitting itself.

By inspecting for signs of corrosion, such as rust or deterioration, necessary maintenance or replacement can be planned to ensure the fittings are in good condition.

Regular examination of thru-hull fittings should include checking for tightness, cracks, wear, or other visible damage.

It is also advisable to ensure the proper operation of any valves associated with the fittings.

While the other options may also be part of a maintenance program, examining thru-hull fittings for leakage or corrosion is particularly crucial for the safety and reliability of a gasoline-powered boat.

It helps mitigate potential risks associated with water ingress, hull integrity, and overall vessel performance.

For more questions on corrosion

https://brainly.com/question/489228

#SPJ8

Other Questions
Hypoxic-ischemic encephalopathy is more associated with O swelling of the brain due to the build-up of cerebral spinal fluid. O a repeated head injury in sports like football and soccer. O A complication at birth, which can lead to cerebral palsy. O a single head injury that causes bleeding in the brain usually occurring in the elderly. O An overdose of opioids such fentanyl. Haloperidol has the strongest affinity for binding to OH3 O D2 O D4 O 5-HT2 O NMDA receptors. MODULE 1 - PRACTICE EXERCISE #2 Complete this practice exercise after you have viewed "Lesson E: Equilibrium and Shock Analysis." The Canadian National Exhibition, also known as "The EX" is an annual fair that takes place in Toront the two-week period leading up to Labour Day. Over 1.4 million people visit the fair. Consider the market for food at the EX. There are dozens of food vendors, so we can use the perfectly competitive model to analyze this market. What will happen to the price and quantity of food at the EX if: (1) food workers form a ion, demanding higher wages AND (2) two hundred people become ill with food poisoning as a result of eating "cronut burgers". You will need to draw a market diagram to answer this question. Define two derived classes of the abstract class ShapedBase explained below. The two classes will be called RightArrrow and LeftArrow. These classes will be the classes Rectangle and Triangle, but they will draw arrows that point right and left, respectively. For example, the following arrow points to the right. The size of the arrow is determined by two numbers, one for the length of the "tail" and one for the width of the arrowhead. The width of the arrow can never be even, the constructor method should check that all width taken are always odd. Design a program for each class that tests all the methods in the class. You can assume the width of the base of the arrow is atleast 3. public abstract class ShapeBase implements Shapelnterface { private int offset; public abstract void drawHere(); public void drawAt(int lineNumber) \{ for (int count =0; count < lineNumber; count++) System.out.plintln(); for (int count =0; System.out drawHere(); 3 Sample Input: Say the right arrow length is 16 and with is 7 (it is noted that arrow width is always odd) Sample Output: Consider the reaction below for the following question. 2Na + H2O= Na2O + H2a. If you start with 25.0 g of sodium and 45.5 g of water how many grams of Sodium Hydroxide will be produced. Show all work please. Thank You! Determine the magnitude of the Coriolis force for the following objects: 4) Latitude: 15 N, Velocity 20 m/s 5) Latitude: 20 N, Velocity 12 m/s When is it better to have a session pass versus just paying general admission? After 8 visits: How much would each person pay? Show your work for calculations.Session Pass______? General Admission______?After 10 visits: How much would each person pay? Show your work for calculations.Session pass _____? General Admission_____? Which field in a table does Access index by default? a) first field in the table b) primary key field c) foreign key field d) any numeric field e) none A tech company has developed a new compact, high efficiency battery for hand-held devices. Market projections have estimated the cost and revenue of manufacturing these batteries by the equations graphed below. Graph titled Cost and Revenue. Y axis titled Dollar Value by the Thousand from 8 to 88 in increments of 8 and x axis titled Batteries by the Thousand from 8 to 88 in increments of 8. Red Cost line with equation y=0.4x+32 starting at 32,0 to 64,72. Blue Revenue link with equation y=1.2x starting at 0,0 to 88,72 Assessment Instructions Show and explain all steps in your responses to the following parts of the assignment. All mathematical steps must be formatted using the equation editor. Part 1: Use the substitution method to determine the point where the cost equals the revenue. Part 2: Interpret your results from Part 1 in the context of the problem. Part 3: Do your results from Part 1 correspond with the graph? Explain. Part 4: Profit is found by subtracting cost from revenue. Write an equation in the same variables to represent the profit. Part 5: Find the profit from producing 100 thousand batteries. : P 7.2-4 Determine v(t) for the circuit shown in Figure P 7.2-4a(t) when the is(t) is as shown in Figure P 7.2-4b and vo(0) = -1 mV. is ( 2 pF (a) is (A) 4 + 0 V -2 L 1 2 3 4 (b) 5 6 t (ns) Two hosts simultaneously send data through the network with a capacity of 1 Mpbs. Host A uses UDP and transmits 100 bytes packet every 1 msec. Host B generates data with a rate of 600 kpbs and uses TCP. Which host will obtain higher throughput and why? Explain your answer. match the following sentences from A-F with the correct number from 3.1-3.4 ?3.1 National Protocol for Assessment A. The policy that provides the guidelines regarding the number of formal and informal assessments for a particular phase, per subject as well as the assessment types to be used. 3.2 National Protocol Pertaining to the Programme and Promotion Requirements B. A document that guides the teaching, learning and assessment process in South African schools from Grade R to Grade 12. 3.3 Education White Paper 6 C. A form of assessment that assesses learners ongoing progress with regard to the attainment of outcomes in a subject. 3.4 Section 4 of the CAPS D. The policy that regulates the promotion and progression of learners from Grade R to Grade 12. 3.5 Curriculum Assessment Policy Statement E. The standardised recording and reporting processes that provide the procedures to be followed when learners are assessed. F. The policy that ensures that assessment meets all the needs of all diverse learners. Si 3,390 kg de plomo ocupan un volumen de 0.3m3. Encuentra la densidad del plomo. write the first five multiples of 17 Find the output of a LSI system with frequency response 1 H(w) = 2w. 1+ j(4) If the input is x(n) = e2 Listen To increase access to a file a soft link or shortcut can be created for the file. What would happened to the soft link if the original file is deleted? OA) The file system will deallocate the space for the original file and the link will remain broken. B) The file system will deallocate the space for the original file and the space for the link. Both files will bedeleted. OC) The file system will keep the original file until the link is deleted. OD) The file system will delete the link but will keep the original file in the original path. A distance of 10 cm separates two lines parallel to the z-axis. Line 1 carries a current I=2 A in the -a, direction. Line 2 carries a current l=3 A in the -a, direction. The length of each line is 100 m. The force exerted from line 1 to line 2 is: Select one: O a +8 ay (MN) O b. -12 ay (m) Oc +8 a, (m) O d. -12 a, (mN) A beverage canning plant uses pipes that fill 220 cans with a volume of 0.355L with water. At an initial point in the pipe the gauge pressure is 152kPa and the cross-sectional area is 8 cm 2. At a second point down the line is 1.35 m above the first point with a cross-sectional area of 2 cm 2. a) Find the mass flow rate for this system of pipes. b) Find the flow speed at both points mentioned. c) Find the gauge pressure at the second point. Answer only in R coding language, please. Thank youQ1. Write a function margin_index_power() that takes as input a matrix A and an argument rows, TRUE/FALSE with a default value of TRUE. margin_index_power(A, rows = TRUE) outputs the matrix A with the elements in the ith row of A taken to the ith power. If rows = FALSE, then do the same but with the columns instead of rows of A.Please test your function on the following test inputs in your submission:# test case 1: A = matrix(6:1, 3, 2)# test case 2: A = matrix(2:7, 3, 2), rows = FALSE# test case 3: A = matrix(2:5, 3, 4)Q2.Write a function is_anti_diagonal() that takes as input a matrix A and outputs TRUE if it is anti-diagonal and FALSE otherwise. While you can assume A is a matrix, you cannot assume that it is square.Q3.Write a function called set_border_NA() that takes as input a matrix A and outputs A with its borders set to NA. If A has exactly one row or exactly one column, throw an error of your choosing. aving for his retirement 25 years from now, Jimmy Olsen set up a savings plan whereby he will deposit $ 25 at the end of each month for the next 15 years. Interest is 3.6% compounded monthly. (i) How much money will be in Mr. Olsens account on the date of his retirement? (ii) How much will Mr. Olsen contribute?None of the answers is correct(i) $8351.12 (ii) 4500.00(i) $8531.12 (ii) 4500.00(i) $7985.12 (ii) 3500.00(i) $8651.82 (ii) 5506.00 Explain why Kleinman posited that Science is social andTechnology is political. Give concrete examples/scenarios.