Butanoic acid has an adjacent carboxyl group that withdraws electron density, making it more readily protonated than butanone.
Both butanoic corrosive and butanone contain a carbonyl gathering, which is an electron-insufficient carbon particle twofold clung to an oxygen molecule. This makes the carbonyl carbon more helpless to nucleophilic assault, including protonation by a solid corrosive.
Nonetheless, butanoic corrosive is more promptly protonated than butanone because of the presence of the neighboring carboxyl gathering. The electronegative oxygen molecule in the carboxyl gathering pulls out electron thickness from the carbonyl oxygen, making it more electron-lacking and subsequently more defenseless to protonation by a solid corrosive. Conversely, butanone misses the mark on extra electron-pulling out bunch, so its carbonyl oxygen is less electron-insufficient and less inclined to be protonated by a solid corrosive.
Generally speaking, the presence of contiguous electron-pulling out gatherings can build the reactivity of carbonyl mixtures towards protonation.
To learn more about carbonyl compounds, refer:
https://brainly.com/question/13086301
#SPJ4
simple help pls picture down below
Answer:
Option B
Explanation:
a saturated solution of milk of magnesia, , has a ph of 10.5. what is the hydronium ion concentration of the solution? is the solution acidic or basic
Milk of magnesia is a suspension of magnesium hydroxide in water, and its chemical formula is Mg(OH)2. When this compound dissolves in water, it dissociates into Mg2+ and OH- ions.
The pH of a solution is a measure of its acidity or basicity. A pH of 10.5 indicates that the solution is basic.
To find the hydronium ion concentration, using the relationship between the pH and the hydronium ion concentration:
pH = -log[H3O+]
Solving for [H3O+], shown as
[H3O+] = 10^(-pH)
Substituting the pH of 10.5, we get:
[H3O+] = 10^(-10.5)
[H3O+] = 3.16 x 10^(-11) M
Therefore, the hydronium ion concentration of the saturated solution of milk of magnesia is 3.16 x 10^(-11) M.
Since the hydronium ion concentration is very low, the solution is basic.
Learn more about hydronium ions, here:
https://brainly.com/question/12415857
#SPJ4
you perform an electrochemical reaction in which 0.800 mol of cu are reduced to solid cu . how many coulombs of charge are transferred?
The number of coulombs of charge transferred is 32220 C
When you perform an electrochemical reaction in which 0.800 mol of Cu are reduced to solid Cu, the number of coulombs of charge transferred can be calculated using Faraday's constant. The answer is 32220 C (coulombs).Explanation:
Given: The amount of Cu reduced to solid Cu = 0.800 mol
The amount of charge transferred can be calculated using Faraday's constant.
Faraday's constant = 96500 C mol^-1
Amount of charge transferred = n x FWhere,
n = Number of moles of electrons transferred.
F = Faraday's constant.Number of moles of electrons transferred
= 2 [Since the Cu ion gains 2 electrons to form Cu]Amount of charge transferred
= 2 x 96500 C mol^-1
= 193000 C [Or 1 F = 96500 C]Amount of charge transferred when 0.800 mol of Cu is reduced to solid Cu
= 193000 x 0.800 = 154400 C or 1.54 x 10^5 C (Approximately).
To learn more about : charge
https://brainly.com/question/18102056
#SPJ11
the ph at the endpoint of a titration of hn3 with naoh is 8.74. which indicators would be a good choice for this titration?
Thymol blue would be a good choice for this titration. As thymol blue has a pH range of 8 to 9.6, its color would change from yellow to green towards the end, making it the most obvious selection out of all of them.
If an indicator changes color at the end point, the end point has been reached and the indicator is being used to measure it. The conclusion of the titration is assumed to be at 8.74. Hence, the pH range of the indicator should be such that at 8.74, the color changes and is visible to the eye. As previously mentioned, a suitable indicator should have a pKin value that is quite near to the anticipated pH at the equivalence point. The choice of the indicator is not very important for a strong acid–strong base titration because of the significant pH shift that takes place at the equivalence point.
Learn more about titration here:
https://brainly.com/question/20732952
#SPJ4
which of the following best explains the pattern in no concentration? (a) no is a secondary pollutant with a long residence time in the atmosphere. (b) no does not play a significant role in smog formation. (c) no is formed in the lower atmosphere in the morning by the rising sun. (d) no is produced by rush-hour traffic and is quickly oxidized in the atmosphere. (e) no is quickly absorbed by plants and converted to sugars.
(a) The statement that "NO is a secondary pollutant with a long residence time in the atmosphere" suggests that NO may accumulate in the atmosphere over time and contribute to poor air quality. This could be a potential explanation for high levels of NO in areas with poor air quality.
(b) The statement that "NO does not play a significant role in smog formation" suggests that NO may not be a key contributor to poor air quality in areas with smog. This could be a potential explanation for low levels of NO in areas with smog.
(c) The statement that "NO is formed in the lower atmosphere in the morning by the rising sun" suggests that NO may be more prevalent in the atmosphere during certain times of day. This could be a potential explanation for fluctuations in NO concentrations over the course of a day.
(d) The statement that "NO is produced by rush-hour traffic and is quickly oxidized in the atmosphere" suggests that NO may be more prevalent in the atmosphere during rush hour. This could be a potential explanation for higher levels of NO in urban areas during rush hour.
(e) The statement that "NO is quickly absorbed by plants and converted to sugars" suggests that NO may be removed from the atmosphere by vegetation. This could be a potential explanation for lower levels of NO in areas with high vegetation cover.
To know more about oxidized click here
brainly.com/question/9496279
#SPJ4
2 X + 3Y ----> 4 Z
If 2.50 moles of X were reacted with Y, how many moles of Z would be produced?
5.00 moles of Z would be produced when 2.50 moles of X are reacted with Y.
From the balanced chemical equation:
2 X + 3Y → 4 Z
We can see that the molar ratio of X to Z is 2:4 or 1:2.
Therefore, if 2.50 moles of X are reacted, we can calculate the number of moles of Z produced using this ratio:
2.50 moles X × (2 moles Z / 1 mole X) = 5.00 moles Z.
For more question on moles click on
https://brainly.com/question/29367909
#SPJ11
What is represented by letter C in the figure?
हिं
ह
36.512 ml of aqueous solution containing 0.111 moles of reactant a in a calorimeter at 25.0oc undergoes the following reaction: a(aq) --> b(aq). (the solution and the calorimeter are initially both at 25oc) when the reaction is complete, the temperature of the solution and the calorimeter is 46.84 oc. what is the enthalpy of the reaction in units of kj/mole of a? assume that the density of the solution is 1.000 g/ml, the specific heat of the solution is 4.186 j/goc, and the calorimeter has a heat capacity of 15.558 j/oc.
The enthalpy of the reaction is -58.7928 kJ/mol of A. Note that the negative sign indicates that the reaction is exothermic (heat is released).
To calculate the enthalpy of the reaction (ΔH) in units of kJ/mole of A, we can use the following equation; ΔH = -q/n
where q is the heat absorbed or released by the reaction, and n is the number of moles of reactant A.
First, we need to calculate the heat absorbed or released by the reaction (q). We can use the following equation to calculate q:
q = m × c × ΔT + C_cal × ΔT
where m is the mass of the solution, c is the specific heat of the solution, ΔT is the change in temperature (T_final - T_initial), and C_cal is the heat capacity of the calorimeter.
The mass of the solution can be calculated using the density of the solution;
mass = volume × density = 36.512 mL × 1.000 g/mL = 36.512 g
Substituting the given values, we get;
q = 36.512 g × 4.186 J/g°C × (46.84°C - 25.0°C) + 15.558 J/°C × (46.84°C - 25.0°C)
= 6524.1 J
Next, we need to calculate the number of moles of reactant A
n = 0.111 moles
Now we can calculate the enthalpy of the reaction:
ΔH = -q/n = -(6524.1 J)/(0.111 moles) = -58792.8 J/mol
Finally, we convert the result to kJ/mol
ΔH = -58.7928 kJ/mol
To know more about enthalpy of the reaction here
https://brainly.com/question/1657608
#SPJ4
mammoth cave np contains deposits of potassium nitrate (kno3) that were used in the past to produce saltpeter, an important ingredient in gunpowder. these nitrate deposits were exploited extensively (and virtually exhausted) to support military action during:
Mammoth Cave NP contains deposits of potassium nitrate (KNO3) that were used in the past to produce saltpeter, an important ingredient in gunpowder. These nitrate deposits were exploited extensively (and virtually exhausted) to support military action during the War of 1812.
Mammoth Cave NP contains deposits of potassium nitrate (KNO3) that were used in the past to produce saltpeter, an important ingredient in gunpowder. These nitrate deposits were exploited extensively (and virtually exhausted) to support military action during the War of 1812.The park is 211.26 square kilometers in size and has approximately 400 miles of surveyed caves. The longest cave system in the world is located here.
Mammoth Cave was established in 1941 as a national park. Since then, scientists have discovered that Mammoth Cave National Park's cave system is among the most biologically diverse in the world. Mammoth Cave National Park has been designated a UNESCO World Heritage Site and a Biosphere Reserve as well. So therefore these nitrate deposits were exploited extensively (and virtually exhausted) to support military action is during the War of 1812.
Learn more about Mammoth Cave at:
https://brainly.com/question/8763948
#SPJ11
How does the Gulf Stream affect the air masses above the ocean water?
A. causes the air masses to become cooler
B. causes the air masses to become warmer
C. causes the air masses to collide
D. causes the air masses to move along the jet stream
B. causes the air masses to become warmer. The Gulf Stream is a warm ocean current that flows from the Gulf of Mexico into the Atlantic Ocean.
The Gulf Stream is a powerful ocean current that transports warm water from the Gulf of Mexico into the Atlantic Ocean. This warm water is carried northward along the eastern coast of the United States and across the Atlantic towards Europe. The warm water of the Gulf Stream also has an impact on the atmosphere above it.
As warm water from the Gulf Stream evaporates, it adds moisture to the air above it, making the air warmer and more humid. This process is known as evaporation-induced cooling, and it can have a significant impact on the weather and climate of the regions surrounding the Gulf Stream.
The warm and moist air above the Gulf Stream creates instability in the atmosphere, which can lead to the formation of thunderstorms and other weather events. The Gulf Stream also affects the formation of hurricanes and other tropical storms, as it provides the warm water and moist air needed for these storms to develop.
Learn more about Gulf Stream here:
https://brainly.com/question/25914269
#SPJ1
How many kJ of heat are required to melt a 50.0-g popsicle at 0°C?
Assume the popsicle has the same molar mass and enthalpy of fusion
as water.
Answer: 16.7 KJ of heat
Explanation:
The heat required to melt the popsicle can be calculated using the equation:
q = nΔH
where q is the heat required, n is the number of moles of the substance being melted, and ΔH is the enthalpy of fusion.
To find the number of moles of the popsicle, we need to divide the mass by the molar mass:
n = m/M
where m is the mass of the popsicle and M is the molar mass. Since the popsicle has the same molar mass as water (18.0 g/mol), we have:
n = 50.0 g / 18.0 g/mol = 2.78 mol
The enthalpy of fusion of water is 6.01 kJ/mol, so we can calculate the heat required as:
q = nΔH = 2.78 mol x 6.01 kJ/mol = 16.7 kJ
Therefore, 16.7 kJ of heat are required to melt a 50.0-g popsicle at 0°C.
a student failed to notice a bubble in the tip of the burette before starting a titration. how does the bubble affect the final reading of the volume of naoh at the end point of the titration? biased high or biased low? explain your answer
The bubble in the tip of the burette will lead to an inaccurate final reading of the volume of NaOH at the end point of the titration.
The reading will be biassed high as a result of the bubble. This is so that, without really contributing to the measurement, the bubble will increase the volume of NaOH in the burette.
The bubble is not a component of the measurement, thus any volume it occupies will be added to the final value, making the reading higher than it should be.
As a result, the bubble will produce an unreliable and skewed high reading, which could result in false results.
To learn more about titration visit:
https://brainly.com/question/186765
#SPJ4
the reducing end of a disaccharide or polysaccharide is not: a) the end with an anomeric carbon that can be oxidised b) the end that does not have an anomeric carbon c) the end of a chain with a free anomeric carbon d) the end whose sugar can take the linear form e) all of the above
The reducing end of a disaccharide or polysaccharide is not: the end that does not have an anomeric carbon. Therefore, option b is the correct answer.
Option a, the end with an anomeric carbon that can be oxidized, is the reducing end. The anomeric carbon is the carbonyl carbon that is involved in the glycosidic bond. This carbon can be oxidized and can reduce other molecules.
Option c, the end of a chain with free anomeric carbon, is also the reducing end. A free anomeric carbon is not involved in a glycosidic bond, and therefore, it can be oxidized and can reduce other molecules.
Option d, the end whose sugar can take the linear form, is also the reducing end. When the sugar takes the linear form, the anomeric carbon is free and can be oxidized and can reduce other molecules. Therefore, option e is not correct as all of the above options are correct except for option b.
For more such questions on polysaccharide
brainly.com/question/5527351
#SPJ11
you were given the values 0.2107, 2.253, 3.392, and 17.58 as the van der waals parameter a for the gases co2, ch3cn, ne, and ch4 but not the correspondence of the values to the compounds. what a value shoud be assigned to ch3cn?
The van der Waals parameter 'a' value that should be assigned to CH3CN is 17.58.
To determine the van der Waals parameter (a) value for CH3CN, we must first understand the significance of the van der Waals equation and the parameter "a" itself. The van der Waals equation accounts for the non-ideal behavior of gases by considering the finite size of gas particles and the attractive forces between them.
The "a" parameter represents the strength of the attractive forces between the gas particles.
Generally, larger and more polarizable molecules have higher "a" values due to stronger attractive forces. Now, let's compare the four given gases - CO2, CH3CN, Ne, and CH4.
1. CO2 (carbon dioxide) is a linear, non-polar molecule, but it has a relatively large molecular weight.
2. CH3CN (acetonitrile) is a polar molecule with a cyano group (-C≡N) and a methyl group (-CH3), leading to stronger attractive forces.
3. Ne (neon) is a noble gas with weak attractive forces due to its small size and low polarizability.
4. CH4 (methane) is a non-polar molecule with a smaller size compared to CO2 and CH3CN.
Based on this information, we can roughly rank the gases in terms of their expected "a" values: CH3CN > CO2 > CH4 > Ne.
Now, let's match the given values (0.2107, 2.253, 3.392, 17.58) to the compounds:
1. Ne has the smallest "a" value, so it corresponds to 0.2107.
2. CH4 has the next smallest "a" value, so it corresponds to 2.253.
3. CO2 has a larger "a" value than CH4, so it corresponds to 3.392.
4. CH3CN has the largest "a" value, so it corresponds to 17.58.
Thus, the "a" value assigned to CH3CN should be 17.58.
Learn more about Vander Waals parameter here:
brainly.com/question/13201335
#SPJ11
What are negative environmental arguments that may be raised against actions that are being taken for primarily economic reasons?
The increased use of non-renewable resources, rising pollution levels, global warming, and the possible loss of natural ecosystems are all effects of economic expansion on the environment.
What is a harmful environmental action?Many human activities such as overcrowding, pollution, the use of fossil fuels, and forestry have an adverse effect on the physical environment. Global warming, soil degradation, poor air quality, even undrinkable water have all been brought on by changes like these.
Which environmental elements are harmful?Several particular environmental problems can be detrimental to people's health and wellbeing. Environmental contamination, air pollution, global warming, pathogenic bacteria, lack of healthcare access, insufficient infrastructure, or poor water quality are some of these problems.
To know more about natural visit:
https://brainly.com/question/15325233
#SPJ1
when the balancing of the equation for the reaction, taking place in acidic media is properly completed, what is the sum of all the coefficients in the equation?
The sum of all the coefficients of the reaction MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻ after balancing is found to be 16.
Here, is the unbalanced equation ('skeleton equation') of the chemical reaction. All reactants and products must be known. For a better result write the reaction in ionic form.
MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻
Firstly, we balanced the not oxygen and hydrogen compounds by adding the required coefficient in from the the respective element of the reaction in the acidic medium.
Now, then we balance the oxygen atom by adding the water molecules on the opposite side of the required side of the reaction.
It is to be noted that we are using H₂O molecule and OH⁻ for balancing hydrogen molecules because it is in the acidic medium.
Now, the final reaction is,
2MnO₄⁻ + 3Mn²⁺ + 4OH⁻ → 5MnO₂ + 2H₂O
Now, the sum of all coefficients is 16.
To know more about balancing redox reaction, visit,
https://brainly.com/question/27907895
#SPJ4
Complete question - when the balancing of the equation for the reaction,
MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻ taking place in acidic media is properly completed, what is the sum of all the coefficients in the equation?
as a chemical reaction is taking place, the student notices that the temperature has dropped. this indicates that the system has increased in energy. what type of process is this?
A decrease in temperature during a chemical reaction indicates that the system has lost energy to the surroundings and is because the energy released during the reaction is transferred from the system to the surroundings in the form of heat.
The type of process that causes a decrease in temperature during a chemical reaction is known as an exothermic process. In exothermic reactions, energy is released from the system in the form of heat and transferred to the surroundings, resulting in a decrease in the energy of the system. Exothermic reactions are commonly observed in combustion reactions, where a fuel reacts with oxygen to produce heat and light energy.
It is important to note that the amount of energy released during an exothermic reaction can vary depending on the specific reactants and conditions involved. In some cases, exothermic reactions can release a significant amount of energy, such as in the case of explosive reactions. In other cases, the energy released may be relatively small and not readily apparent, such as in the case of rusting of iron.
In summary, a decrease in temperature during a chemical reaction is an indication of an exothermic process, where energy is released from the system to the surroundings in the form of heat.
Learn more about Chemical reactions here:
brainly.com/question/29039149
#SPJ4
a. what is the concentration of the unknown acid? b. what is the ka of the unknown acid? c. which of the indicators given below would be a good choice to use in the titration of this acid with the naoh?
a. To determine the concentration of the unknown acid, you would need to perform a titration with a known concentration of a strong base like NaOH. Follow these steps:
1. Record the volume of the unknown acid solution used.
2. Record the initial and final burette readings of NaOH.
3. Calculate the volume of NaOH used in the titration.
4. Write a balanced equation for the reaction between the unknown acid and NaOH.
5. Use stoichiometry to find the moles of acid reacted.
6. Divide the moles of acid by the volume of the unknown acid solution used (in liters) to find the concentration.
b. To determine the Ka of the unknown acid, you will need additional information, such as the pH at the half-equivalence point (where half of the acid has been neutralized) or the pH and concentration of the acid after a certain amount of NaOH has been added. Then, you can use the following steps:
1. Write the balanced equation for the dissociation of the acid in water.
2. Use the given pH information to find the concentration of H+ ions.
3. Use the stoichiometry of the reaction to find the concentration of the other species in the equation.
4. Write the expression for Ka, which is [products]/[reactants].
5. Plug the concentrations into the Ka expression and solve for Ka.
c. When choosing an indicator for a titration, you should select one whose pH range (the range over which the indicator changes color) coincides with the pH of the equivalence point (where the acid is completely neutralized). You will need to determine the pH of the equivalence point, then choose an indicator that changes color within that pH range.
to know more about acid refer here:
https://brainly.com/question/11543614#
#SPJ11
calculate the number of moles of NaCl contained in 0.500 L of a 1.5M solution
Answer:
mol = 0.75
Explanation:
M = mol/L
1.5 = mol/.5
mol = 0.75
3. How many mL of a 0.235 M solution of sulfuric acid is required to neutralize
30.0 mL of 0.260 M potassium hydroxide?
The balanced chemical equation for the neutralization reaction between sulfuric acid and potassium hydroxide is:
H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l)
From the equation, we can see that one mole of sulfuric acid reacts with two moles of potassium hydroxide. Therefore, we need to calculate the number of moles of potassium hydroxide present in the 30.0 mL of 0.260 M solution:
0.260 mol/L x 0.0300 L = 0.00780 mol KOH
Since the stoichiometric ratio of sulfuric acid to potassium hydroxide is 1:2, we need twice as many moles of sulfuric acid to neutralize the potassium hydroxide:
2 x 0.00780 mol = 0.0156 mol H2SO4
Finally, we can calculate the volume of the 0.235 M sulfuric acid solution required to provide 0.0156 moles of H2SO4:
0.0156 mol / 0.235 mol/L = 0.0664 L = 66.4 mL
Therefore, 66.4 mL of the 0.235 M sulfuric acid solution is required to neutralize 30.0 mL of 0.260 M potassium hydroxide.
To know more about potassium hydroxide, visit:
https://brainly.com/question/21904397
#SPJ1
Which of the following reactions
is BALANCED and shows
INCOMPLETE combustion?
A. 2CH +40, - 5CO+6H,O
B. 2C₂H+40₂ → 7CO₂ + 6H₂O
C.
2C₂H+70₂4CO₂ + 6H₂O
D. 2C,H, +50, + 4CO + 6H₂0
The balanced reaction that shows incomplete combustion is 2C4H10 + 5O2 → 4CO + 6H2O.
option D.
What is balanced equation for incomplete combustion?The balanced equation for incomplete combustion involves a reactant, usually a hydrocarbon fuel, reacting with a limited supply of oxygen to produce carbon monoxide (CO) instead of carbon dioxide (CO2) and water (H2O).
Out of the options given, the balanced equation that shows incomplete combustion is:
D. 2C4H10 + 5O2 → 4CO + 6H2O
This equation shows incomplete combustion because it produces carbon monoxide (CO) instead of carbon dioxide (CO2). The equation is balanced because there are equal numbers of atoms of each element on both the reactant and product sides of the equation.
Learn more about incomplete combustion here: https://brainly.com/question/1608267
#SPJ1
if 2.00 mol of carbon dioxide and 1.5 mol of hydrogen are placed in a5.00 l vessel and equilibrium is established, what will be the concentration of carbonmonoxide?7)
The concentration of carbon monoxide is also [tex]x = 0.0371\ \mathrm{M}$.[/tex]The balanced chemical equation for the reaction is:
[tex]$\mathrm{CO_2 + 4H_2 \rightleftharpoons CH_4 + 2H_2O}$[/tex]
The equilibrium expression for the reaction is:
[tex]$K_c = \dfrac{[CH_4][H_2O]^2}{[CO_2][H_2]^4}$[/tex]
At equilibrium, let the concentration of CO2 be $x$,, the concentration of CH4 be $y$, and the concentration of H2 be $z$.
Initial concentrations:
[tex]$[CO_2] = 2.00\ \mathrm{mol}/5.00\ \mathrm{L} = 0.400\ \mathrm{M}$[/tex]
[tex]$[H_2] = 1.50\ \mathrm{mol}/5.00\ \mathrm{L} = 0.300\ \mathrm{M}$[/tex]
[tex][CH_4] = 0\ \mathrm{M}$ (initially)[/tex]
[tex][H_2O] = 0\ \mathrm{M}$ (initially)[/tex]
At equilibrium, we know that:
[tex]y = [CH_4] = 2x$[/tex]
[tex]2y = [H_2O]$[/tex]
[tex]z = [H_2] - 4y = 0.300 - 4(2x) = 0.300 - 8x$[/tex]
Substituting these expressions into the equilibrium expression and solving for $x$:
[tex]K_c = \dfrac{(2x)(2y)^2}{x(0.300 - 8x)^4} = 3.80$[/tex]
Solving this equation gives:
[tex]x = 0.0371\ \mathrm{M}$[/tex]
Therefore, the concentration of carbon monoxide is also [tex]x = 0.0371\ \mathrm{M}$.[/tex]
Learn more about carbon monoxide
https://brainly.com/question/22530423
#SPJ4
consider an unknown compound with the formula c h i . given that the compound is composed of 54.53 % c, 9.15% h and 36.32% o what is the empirical formula of the compound?
Think about an unidentified substance with the formula c h i. it contains 54.53% C, 9.15% H, and 36.32% O. The empirical formula of the compound is C2H4O.
To find the empirical formula of a compound from the given percentage composition, we need to convert the percentages into the number of moles of each element. We can assume a convenient mass for the compound, such as 100 g, and use the molar masses of each element to convert the percentages into moles.
For this unknown compound, if we assume 100 g of the compound, we have:
Mass of C = 54.53 g
Mass of H = 9.15 g
Mass of O = 36.32 g
Using the molar masses of each element (12.01 g/mol for C, 1.01 g/mol for H, and 16.00 g/mol for O), we can convert these masses into moles:
Moles of C = 54.53 g / 12.01 g/mol = 4.54 mol
Moles of H = 9.15 g / 1.01 g/mol = 9.06 mol
Moles of O = 36.32 g / 16.00 g/mol = 2.27 mol
Next, we divide each of the mole values by the smallest mole value to get the smallest whole number ratio of the atoms:
C: 4.54 mol / 2.27 mol = 2
H: 9.06 mol / 2.27 mol = 4
O: 2.27 mol / 2.27 mol = 1
Therefore, the empirical formula of the compound is C2H4O.
To learn more about empirical formulas
https://brainly.com/question/14044066
#SPJ4
what is the expected major organic product from the treatment of 4-methyl-2-pentyne with excess hydrogen in the presence of a platinum catalyst? 4-methylpentane
4-methylpentane
The response of 4-methyl-2-pentyne with extra hydrogen in the presence of a platinum catalyst is a hydrogenation reaction, which entails the addition of hydrogen atoms across the triple bond of the alkyne. The expected foremost organic product is 4-methylpentane, which is formed through the complete discount of the triple bond to a single bond.
The hydrogenation of 4-methyl-2-pentyne proceeds through a stepwise addition of hydrogen atoms to the triple bond, forming an intermediate alkene and then a saturated alkane. However, the presence of extra hydrogen ensures that the alkene intermediate is quickly decreased to the alkane product, which is the extra thermodynamically secure form.
Therefore, the anticipated main organic product of the hydrogenation reaction of 4-methyl-2-pentyne with extra hydrogen in the presence of a platinum catalyst is 4-methylpentane
learn more about hydrogenation here:brainly.com/question/27594211
#SPJ4
the salt obtained from the combination of the weak acid cyanic acid, hcno, and the weak base ammonia, nh3, is used to make an aqueous solution. is the solution acidic, basic, or neutral? select the correct answer below: neutral acidic basic there is not enough information.
The aqueous solution of the salt formed from the combination of a weak acid and a weak base is neutral. Option A is correct.
The salt obtained from the combination of a weak acid and a weak base can lead to a neutral, acidic, or basic solution depending on the relative strengths of the acid and base involved. In this case, the weak acid cyanic acid (HCNO) and the weak base ammonia (NH₃) react to form the salt ammonium cyanate (NH₄CNO), which can dissociate in water as follows:
NH₄CNO(s) + H₂O(l) → NH₄⁺(aq) + CNO⁻(aq)
Since ammonium ion (NH₄⁺) is the conjugate acid of the weak base ammonia and cyanate ion (CNO⁻) is the conjugate base of the weak acid cyanic acid, their tendency to either accept or donate protons (H⁺) will depend on their respective acid/base strengths.
In this case, because both the acid and base are weak, the salt will be a neutral salt, which means it will not affect the pH of the aqueous solution. Therefore, the aqueous solution of ammonium cyanate is expected to be neutral. In summary, the salt generated by combining a weak acid with a weak base is neutral in aqueous solution. Option A is correct.
To know more about the Aqueous solution, here
https://brainly.com/question/31312979
#SPJ4
a concentration cell was set up at using two hydrogen electrodes. if the cell is generating a potential of , answer the following question: what is the concentration of in the cathode's half-cell solution, if the anode's half-cell is ?
The concentration of in the cathode's half-cell solution is 5.12 × 10^-6 M if the anode's half-cell is 1 M.
While answering questions on the Brainly platform, a question answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and should not provide extraneous amounts of detail,
ignore any typos or irrelevant parts of the question, and use the terms mentioned in the question appropriately.In a concentration cell that was set up at using two hydrogen electrodes, the cell generates a potential of . The question is, what is the concentration of in the cathode's half-cell solution, if the anode's half-cell is ?
The given data is:Potential of the cell, °cell = 0.059 log10 [H+]cathode/[H+]anode= -0.0418 V (negative because H2 gas concentration is higher in the anode than in the cathode)Since we know the value of °cell,
we can calculate the cathode half-cell potential as:
E cathode = °cell - E anode = 0.0008 VAnd then using the Nernst equation, we can find the concentration of H+ in the cathode half-cell as follows:
E cathode = E° - (RT/nF) ln [H+]H+/H2The value of E° at room temperature,
T = 298K is zero, and the number of electrons involved,
n = 2. Hence,0.0008 V = -(0.0592/2) log10[H+]H+/H2[H+]H+/H2 = 5.12 × 10^-6 M.
To learn more about : solution
https://brainly.com/question/25326161
#SPJ11
Answer the following question in the attachment please for homework that is due tomorrow
Answer:
Details on attachment.
Explanation:
See attached worksheet.
things that happened to the organisms I tracked: (example: was eaten by other organisms)
Reproduced, transferred their genes to progeny, died from natural causes, fell ill or contracted a disease, became prey for a predator or were devoured by a scavenger, or moved to a new area.
What kind of non-living entity might be present in an ecosystem?Non-living things include items like rocks, water, the atmosphere, the climate, and natural occurrences like earthquakes and rockfalls. One of the qualities that characterises living beings is their capacity for reproduction.
What are five non-living examples?Its definition includes glass, the sun, water, sand, and rock as non-living objects. They show absolutely no signs of life. Some people define a non-living object as anything that once belonged to a live entity.
To know more about scavenger visit:-
https://brainly.com/question/31224075
#SPJ1
25 a sample of a compound contains only the elements sodium, sulfur, and oxygen. it is found by analysis to contain 0.979 g na, 1.365 g s, and 1.021 g o. determine its empirical formula.
The empirical formula of the compound is Na2S.
To find the number of moles of each element in the compound, we divide the mass of each element by its atomic mass.
The atomic masses of sodium, sulfur, and oxygen are 22.99 g/mol, 32.06 g/mol, and 16.00 g/mol, respectively.
Thus, the number of moles of sodium in the compound is
0.979 g/22.99 g/mol = 0.0425 mol.
Similarly, the number of moles of sulfur and oxygen in the compound are
1.365 g/32.06 g/mol = 0.0425 mol and
1.021 g/16.00 g/mol = 0.0638 mol,
The next step is to determine the empirical formula of the compound. To do this, we need to find the simplest whole number ratio of the atoms in the compound. The simplest whole number ratio of the atoms in the compound is obtained by dividing the number of moles of each element by the smallest number of moles obtained.
In this case, the smallest number of moles obtained is 0.0425 mol, which corresponds to the number of moles of sodium and sulfur in the compound.
.
to learn more about: Empirical formula
https://brainly.com/question/1603500
#SPJ11
why is a carbonyl group polar?select the correct answer below:carbon is significantly more electronegative than oxygen.oxygen is significantly more electronegative than carbon.oxygen is significantly more electropositive than carbon.none of the above
A carbonyl group polar because b. oxygen is significantly more electronegative than carbon.
The carbonyl group is a functional group in organic chemistry consisting of a carbon atom double-bonded to an oxygen atom. C=O is the formula for a carbonyl group, this structure is present in many ketones and aldehydes, as well as carboxylic acids, esters, and amides. Oxygen is much more electronegative than carbon, and as a result, the electrons in the carbon-oxygen double bond are more strongly attracted to the oxygen atom. Because the electrons are attracted to the oxygen atom, the carbon-oxygen bond becomes polarized, with oxygen becoming negatively charged and carbon becoming positively charged.
The carbonyl group is an important functional group in biochemistry since it is found in a variety of biomolecules like carbohydrates, lipids, and nucleic acids. Because of its polarity, it can engage in hydrogen bonding with other functional groups in these molecules, such as hydroxyl groups. A carbonyl group polar because b. oxygen is significantly more electronegative than carbon.
Learn more about carbonyl group at:
https://brainly.com/question/13564853
#SPJ11