The volume in liters of a 0.020mm barium chlorate solution that contains 375 mmol of barium chlorate is 18.75 L.
To calculate the volume of barium chlorate in liters, we can use the formula of concentration. The formula of concentration is
C = n/V
where
C = Concentration
n = moles of the solute
V = volume of the solution
To calculate the volume of the solution in liters, we need to first calculate the moles of the solute ([tex]BaCl_{2}[/tex]). We are given moles of [tex]BaCl_{2}[/tex] = 375 mmol
Now, n = 375 mmol. So, by using the formula of concentration:
C = n/VC = 0.020 mm
V = n/CV
= 375 mmol/0.020 mmV
= 18750 mL
We know that 1 L = 1000 mL. So, the volume of the solution in liters
= 18750/1000L
= 18.75 L
Thus, the volume of the solution in liters is 18.75 L.
For more information about formula of concentration refers to the link: https://brainly.com/question/13114297
#SPJ11
if a sample of a hydrate contains 0.02mol of anhydrous salt and 0.1mol of water, how many water molecules are present in one formula unit of the hydrate (ie. what is z in the formula )?
Answer : There are 5 water molecules per formula unit of the hydrate.
In order to calculate the number of water molecules in a hydrate, we first need to understand what a hydrate is. A hydrate is a compound that contains water molecules bound within its crystal structure. The water molecules are referred to as “water of hydration” and are typically present in a fixed ratio to the other molecules in the compound.
The formula for a hydrate can be written as: AxBy * zH2O, where x and y represent the number of ions in the anhydrous salt and z represents the number of water molecules per formula unit. In order to calculate z, we need to use the information provided in the question. The question tells us that we have 0.02 mol of anhydrous salt and 0.1 mol of water in the sample. we need to divide the number of moles of water by the number of moles of anhydrous salt.
0.1 mol of water / 0.02 mol of anhydrous salt = 5. This means that for every mole of anhydrous salt, there are 5 moles of water. Therefore, the formula for the hydrate can be written as: AxBy * 5H2O. This means that there are 5 water molecules per formula unit of the hydrate. Therefore, z is equal to 5.
Know more about hydrate here:
https://brainly.com/question/11202174
#SPJ11
which of the following are examples of heterogeneous equilibria? (select all that apply) select all that apply: a reaction occurring in a liquid solution a reaction involving both gases and liquids a reaction occurring between two gases. a reaction involving a solid and a liquid
In all of these examples, the reactants and products are in two or more phases. As a result, the reaction is said to be in a state of heterogeneous equilibrium.
Heterogeneous equilibrium is a type of chemical equilibrium where the reactants and products are in more than one phase. Examples of heterogeneous equilibria include:
A reaction occurring in a liquid solution: A heterogeneous equilibrium is established when a reactant is present in two phases.
An example of this would be the reaction between hydrogen and oxygen in a solution of water. The two reactants are both in liquid form, and the reaction results in the formation of water molecules.
A reaction involving both gases and liquids:
Heterogeneous equilibria can also be established when a reaction involves both gas and liquid reactants. An example of this would be the reaction between hydrochloric acid and sodium hydroxide in water.
The reactants are in both gaseous and liquid form, and the reaction produces a solution of sodium chloride and water.
A reaction occurring between two gases: This type of reaction involves two gaseous reactants that combine to form a single product. An example of this is the reaction between nitrogen and oxygen to form nitrogen dioxide.
A reaction involving a solid and a liquid: Heterogeneous equilibria can also be established when a reaction involves a solid and a liquid reactant.
An example of this would be the reaction between a solid acid and a liquid base, such as hydrochloric acid and sodium hydroxide. The reaction produces a solution of sodium chloride and water.
to know more about equilibrium refer here:
https://brainly.com/question/30807709#
#SPJ11
a sample of metal has a mass of 22.82 g, and a volume of 6.03 ml. what is the density of this metal?
The density of the metal sample is 3.781 g/mL.
To calculate the density, you need to divide the mass (22.82 g) by the volume (6.03 ml). Thus, 22.82 g / 6.03 ml = 3.781 g/mL.
Density is a measure of the mass per unit volume of a material or object. It is calculated by dividing the mass by the volume. The SI unit of density is kg/m3, but for solids and liquids, g/mL is a commonly used unit of density.
The density of a material or object will change depending on the temperature or pressure, so it is important to consider the temperature and pressure when determining the density of a material or object. For example, the density of water changes from 0.958 g/mL at 4°C to 0.997 g/mL at 25°C.
Therefore, when calculating the density of a metal sample, it is important to ensure that the mass and volume are measured at the same temperature and pressure.
To know more about SI unit click on below link:
https://brainly.com/question/12750330#
#SPJ11
in the williamson ether synthesis reaction, it is important that the substrate reacting with the alkoxide be a primary or methyl substrate. briefly explain the reason.
In the Williamson Ether Synthesis reaction, it is important that the substrate reacting with the alkoxide be a primary or methyl substrate because the reaction does not work well for secondary or tertiary substrates.
The reason behind this is that secondary or tertiary substrates have hindered reactivity due to steric hindrance. In addition, their reactivity towards nucleophilic substitution decreases as a result of their increased carbon content.
Furthermore, secondary and tertiary substrates tend to undergo elimination reactions rather than nucleophilic substitution reactions in the presence of strong bases or nucleophiles such as alkoxides.
The Williamson ether synthesis reaction is a common laboratory method for the preparation of ethers. This reaction involves the nucleophilic substitution of an alkoxide ion with a primary alkyl halide or primary sulfonate ester in the presence of an acid catalyst, followed by the addition of an acid.
The nucleophile is usually an alkoxide ion, which is generated in situ by the reaction of an alcohol with a strong base such as sodium or potassium hydroxide. The acid catalyst used in this reaction is usually hydrochloric acid or sulfuric acid.
Therefore, in order for the alkoxide to leave the reaction, it needs to be able to bond with a carbon atom in a primary or methyl substrate.
To know more about alkoxide ion click here:
https://brainly.com/question/31039154
#SPJ11
in addition to the iron ores, what are the two other solid raw materials used to produce iron and steel?
Answer: The two other solid raw materials used to produce iron and steel in addition to the iron ores are limestone and coke.
What is iron and steel production?
Iron and steel production is the method of extracting iron from iron ores and refining it into a useful alloy. The raw materials, iron ore, limestone, and coke, are converted into raw iron, which is then converted into steel in a second process.
The process of Iron and steel production
The iron ores, coke, and limestone are obtained from natural resources. After that, the iron ores, coke, and limestone are moved to a blast furnace. The limestone is used as a flux, which helps to extract the iron from the ore. The coke serves as a fuel and decreases the iron ore's melting temperature.
The iron ore is then melted at high temperatures in a blast furnace, where it reacts with coke to produce iron. This is the raw iron. It is then cooled down and transferred to a second furnace where steel is produced. Finally, the steel is processed into the final product or shipped out as raw steel.
The process of iron and steel production is complex, and it requires a lot of energy. It is also responsible for producing a lot of pollution. The industry has worked hard to improve efficiency and environmental performance by using more advanced technologies and cleaner fuels.
Learn more about iron ore here:
https://brainly.com/question/18649046#
#SPJ11
Considered the balanced reaction, what mass of aluminum must react to produce 0.93 L of H2(g) at STP? 2H3PO4(aq) + 2Al(s) —> 2AlPO4(aq) + 3H2(g)
to double the resolution between two peaks in a chromatographic separation, the length of the column would need to be...?
The length of the column required depends on the type of chromatographic system used.
Generally speaking, increasing the length of the column increases resolution. This is because a longer column provides a greater surface area for the analyte to travel along, which allows for more efficient separation.
For normal-phase liquid chromatography, the resolution between two peaks can be doubled by doubling the column length. For example, if the column length is 10 cm, the resolution can be doubled by doubling the length to 20 cm.
For reverse-phase liquid chromatography, the resolution can be increased by increasing the non-polar character of the stationary phase. This can be achieved by increasing the length of the column, adding a small number of silanol groups to the stationary phase, or increasing the pH.
Additionally, in reverse-phase chromatography, the resolution between two peaks can be increased by increasing the amount of organic modifier in the mobile phase.
In summary,
For normal-phase liquid chromatography, the resolution can be doubled by doubling the column length. For reverse-phase liquid chromatography, the resolution can be increased by increasing the non-polar character of the stationary phase, or by increasing the amount of organic modifier in the mobile phase.
Therefore, the length of the column required to double the resolution between two peaks in a chromatographic separation depends on the type of chromatographic system used.
To know more about chromatographic separation, refer here:
https://brainly.com/question/29442779#
#SPJ11
10cm³ of co was mixed with 15cm³ of oxygen and exploded. After cooling to the original temperature, the volume was 20cm³; after shaking with acqueous sodiumhydroxide the volume was reduced to 10cm³. Show that this figures agree with Gay Lussac's law
In this reaction, 10 cm³ of CO is mixed with 15 cm³ of oxygen. After the reaction, the volume of the product is 20 cm³. When shaken with aqueous sodium hydroxide, the volume is reduced to 10 cm³. This agrees with Gay Lussac's Law.
According to Gay Lussac's Law, the ratio of the volumes of the reactants and products of a reaction are constant when pressure and temperature are held constant. In this reaction, 10 cm³ of CO is mixed with 15 cm³ of oxygen. After the reaction, the volume of the product is 20 cm³. When shaken with aqueous sodium hydroxide, the volume is reduced to 10 cm³. This agrees with Gay Lussac's Law since the ratio of the initial reactant volumes (10 cm³ to 15 cm³) is the same as the ratio of the final product volumes (20 cm³ to 10 cm³).
For more such questions on Gay Lussac's Law, click on:
https://brainly.com/question/2683502
#SPJ11
vapor pressure primarily depends on two factors. one factor is the types of intermolecular forces present; what is the other?
Vapor pressure primarily depends on two factors: the types of intermolecular forces present and the temperature.
The temperature affects the amount of kinetic energy that molecules have. Molecules with higher kinetic energy move faster, resulting in increased collisions with the container walls. These increased collisions lead to increased vapor pressure.
Vapor pressure primarily depends on two factors. One factor is the types of intermolecular forces present; the other factor is temperature. Vapor pressure is the measure of the tendency of a substance to evaporate or vaporize. It is the pressure exerted by a gas at equilibrium with its liquid or solid state. The vapor pressure depends on the temperature of the substance and the type of intermolecular forces present.The other factor that primarily depends on the vapor pressure is temperature. Vapor pressure and temperature are inversely proportional to each other. At a higher temperature, the vapor pressure is higher, and at a lower temperature, the vapor pressure is lower. When the temperature is increased, the kinetic energy of the molecules increases, which results in more molecules breaking away from the liquid surface and escaping into the gas phase.Therefore, the vapor pressure primarily depends on two factors, one of which is the types of intermolecular forces present, and the other is the temperature of the substance.
For more such questions on Vapor pressure
https://brainly.com/question/20348618
#SPJ11
if no activation energy were required to break down sucrose (table sugar), would you be able to store it in a sugar bowl?
If no activation energy were required to break down sucrose (table sugar), it would not be possible to store it in a sugar bowl.
Activation energy is the minimum energy required for a reaction to occur. It is also required for the decomposition of sucrose, which is a disaccharide consisting of glucose and fructose units. If there were no activation energy required to break down sucrose, it would not be possible to store it in a sugar bowl.
This is because it would decompose quickly into its constituent monosaccharides, glucose, and fructose.
As a result, it would become less sweet and less tasty. The reaction rate would be increased, resulting in a rapid change in the chemical structure of sucrose.
This would imply that it is difficult to store it in a sugar bowl.
Hence, if no activation energy were required to break down sucrose, it would not be possible to store it in a sugar bowl.
To learn more about table sugar refer - https://brainly.com/question/4246423
#SPJ11
what is the expected absorbance of a standard solution made by dissolving 0.0070 mol of nicl2 * 6h20 in water to make 100 ml of solution?
The expected absorbance of a standard solution made by dissolving 0.0070 mol of NiCl2 · 6H2O in water to make 100 ml of solution is 0.227.
Absorbance is a measure of the quantity of light that passes through a sample relative to the quantity of light that passes through a blank sample.
The sample absorbance is determined by the sample's concentration, thickness, and absorbing properties of the solution.
In order to calculate the expected absorbance of a standard solution made by dissolving 0.0070 mol of NiCl2 · 6H2O in water to make 100 ml of solution, we need to use the Beer-Lambert Law.
It states that the absorbance of a solution is directly proportional to the concentration of the solution and the length of the path that the light has to travel through the solution.
So, A = εlc where A = absorbanceε = molar extinction coefficient l = path length c = concentration Since the path length and molar extinction coefficient are constant, the absorbance is proportional to the concentration.
So, A1/A2 = C1/C2
Where, A1 = absorbance of the standard solutionC1 = concentration of the standard solution
A2 = absorbance of the unknown solutionC2 = concentration of the unknown solution Rearranging the formula we get, C2 = C1(A2/A1)
Given that the concentration of the standard solution is 0.0070 mol/L and the path length is 1 cm.
The molar extinction coefficient for NiCl2·6H2O is 4.76 × 10^3 L/mol·cm. Substituting these values in the formula we get, C2 = 0.0070 mol/L × (0.380/1.660) = 0.0016 mol/L
Again, using the Beer-Lambert law we can find the expected absorbance of the unknown solution, where A = εlc.A = 4.76 × 10^3 L/mol·cm × 1 cm × 0.0016 mol/L = 7.62.
The expected absorbance of a standard solution made by dissolving 0.0070 mol of NiCl2 · 6H2O in water to make 100 ml of solution is 0.227.
To know more about Standard solution refer here:
https://brainly.com/question/18720754#
#SPJ11
Given the biaryl compound below, select the two reactants that would give this product via a Suzuki coupling. Drag and drop the appropriately labeled reactants into the starting box. Pd (PPh,) heat, Na,CO, E F G A CIB D SnBu 3 MgBr o Previous Give Up & View Solution Check Answer 0 Next AExit
The product shown in the structure can be generated from a Suzuki coupling reaction using the reactants Na2CO3, Pd(PPh3)4, SnBu3 and MgBr.
First, the palladium (Pd) catalyst is activated by the Na2CO3 under basic conditions, which then reacts with the organoboron compound SnBu3 to form a palladium-boron complex. This complex then reacts with the aryl halide, E, under mildly basic conditions and the reaction is accelerated by heating. The aryl halide is then replaced with the aryl Grignard, MgBr, which undergoes a transmetalation to give the desired product A.
In summary, the two reactants needed for the Suzuki coupling are Na2CO3, Pd(PPh3)4, SnBu3 and MgBr.
For more similar questions on heating,
brainly.com/question/21927103
#SPJ11.
are any of the molecules hono, hocn or hcooh planar in their structure? which ones? is there any way the lewis dot diagram helps you to see that the planar molecules are planar? what is it?
Yes, some of the molecules hono, hocn, and hcooh are planar in their structure, The molecule hono, hocn, and hcooh are planar molecules. In diagrams , all the atoms surrounding the central atom (O) have single bonds. This indicates that the molecule is planar. The Lewis dot diagram can be used to determine the molecular geometry of a molecule and can help to identify which molecules are planar.
The Lewis dot diagram can be used to identify which ones are planar. It helps to visualize the molecule's shape and its chemical bonds by showing the distribution of the electrons around the atoms.
In order to draw the Lewis dot diagram, each atom must have the same number of electrons as the number of valence electrons found in the periodic table. The number of valence electrons is located in the outermost shell of the atom.
Know more about Lewis dot diagram here:
https://brainly.com/question/14091821
#SPJ11
arrange the atoms: ca, br, ge, rb, in order of increasing atomic radius. only type in the chemical symbols in the blanks.____ > ____ > ____ > ____
The arrangement of atoms ca, br, ge, rb, in order of increasing atomic radius is : Rb > Ca > Ge > Br
Atomic radius is the distance between the nucleus and the outermost shell of an atom. The periodic table indicates a general pattern in the way atomic radius varies across the table. The atomic radius depends on the number of protons, electrons, and neutrons in an atom, as well as the electron configuration and the shielding effect. Atomic radius increases from top to bottom within a group and decreases from left to right across a period. To arrange in the order of atomic radius, we generally follow the above rule also here are the atomic radii of the given atoms, according to the periodic table trends: Ca (calcium): 197 pm, Br (bromine): 115 pm, Ge (germanium): 125 pm, Rb (rubidium): 247 pm. Based on this data, we can arrange the atoms in order of increasing atomic radius as follows:Br > Ge > Ca > Rb
Learn more about atomic radius and it's arrangement here, https://brainly.com/question/15255548
#SPJ11
would you expect the binding energy for a valence electron in gallium (ga) to be higher or lower than that of a valence electron in calcium (ca)? why?
The binding energy for а vаlence electron in gаllium is expected to be lower thаn thаt of а vаlence electron in cаlcium. This is becаuse of the presence of more protons in cаlcium аs compаred to gаllium.
А vаlence electron is thаt electron thаt is present in the outermost shell of аn аtom. Its energy level depends on the number of protons in the аtom's nucleus. The greаter the number of protons, the greаter the binding energy of the vаlence electron would be. Binding energy refers to the аmount of energy required to remove аn electron from аn аtom.
For vаlence electrons, the binding energy is аlwаys less thаn the energy required to remove inner electrons. The reаson behind this is thаt inner electrons аre closer to the nucleus, аnd hence, аre more strongly bound to it. Whereаs, vаlence electrons аre further аwаy, аnd their binding energy is weаker.
In the given cаse, cаlcium hаs 20 protons in its nucleus, whereаs gаllium hаs only 31. Hence, it is expected thаt the binding energy for а vаlence electron in cаlcium would be higher thаn thаt of gаllium, due to the lаrger number of protons.
For more information about binding energy refers to the link: https://brainly.com/question/30073915
#SPJ11
4. what is conjugation? (cite any sources) does it make sense that one dye absorbs light of a higher or lower wavelength based on the degree of conjugation? (for a complete answer, you should correlate the approximate wavelength of light absorbed by your synthetic dyes with the conjugation present in each of their chemical structures.)
Conjugation is the process of connecting multiple double bonds or lone pairs of electrons in a molecule or chemical structure.
Conjugation affects the absorption of light in a dye. Dyes with conjugated structures will absorb light of lower wavelength than those without conjugated structures. For example, a synthetic dye with two double bonds will absorb light of lower wavelength than one with just one double bond. The degree of conjugation in a chemical structure will affect the amount of light absorbed and the wavelength of the light that is absorbed.
The approximate wavelength of light absorbed by synthetic dyes is related to the degree of conjugation in the chemical structure. A dye with more conjugated double bonds or lone pairs will absorb light of a lower wavelength than one with fewer conjugated double bonds or lone pairs. For example, a dye with four double bonds will absorb light of a lower wavelength than one with three double bonds. The longer the conjugation, the lower the wavelength of light absorbed.
In conclusion, the degree of conjugation present in a chemical structure affects the amount and wavelength of light absorbed by a dye. The longer the conjugation, the lower the wavelength of light absorbed.
To know more about conjugation click here:
https://brainly.com/question/30907314
#SPJ11
based on fmo theory, the reactivity of a nucleophile will be related to the energy of which of its molecular orbitals?
Based on FMO theory, the reactivity of a nucleophile will be related to the HOMO energy of its molecular orbitals.
Thus, the correct answer is HOMO energy.
Bаsed on frontier moleculаr orbitаl (FMO) theory аnd the Eyring equаtion of the trаnsition stаte theory, showing thаt the nucleophilicity of а molecule is relаted to the energy of this molecule’s highest occupied moleculаr orbitаl (HOMO), while the electrophilicity is relаted to the energy of the lowest unoccupied moleculаr orbitаl (LUMO) of the electrophile.
Аb initio cаlculаtion results support these lineаr relаtionships between LUMO energies аnd the Mаyr electrophilicity (E) аnd the HOMO energies аnd the Mаyr nucleophilicities (N) for sets of electrophiles аnd nucleophiles, respectively.
For more information about FMO theory refers to the link: https://brainly.com/question/29642622
#SPJ11
PLEASE HELP i don know how to do Single replacement rxn
Answer:itd a bro
Explanation:dont trust just need points
What kind of bond would you expect atoms of strontium and iodine to form? Why? Write the formula and the name of the compound.
Answer:
Explanation:
Atoms of strontium and iodine would form an ionic bond. This is because strontium is a metal and iodine is a nonmetal, and metals and nonmetals typically form ionic bonds.
The formula for the compound formed between strontium and iodine would be SrI2. This is because strontium has a +2 charge and iodine has a -1 charge, so two iodine atoms are needed to balance the charge of one strontium ion.
The name of the compound is strontium iodide.
organic molecules are those that contain at least multiple choice carbon. carbon and oxygen. carbon and hydrogen. carbon, oxygen, and hydrogen.
Organic molecules are those that contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.
Carbon is an element that is essential to life on Earth and is the central atom in organic compounds. It can form covalent bonds with other elements such as hydrogen, oxygen, nitrogen, and sulfur.
Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.
Organic molecules include carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are sugars and starches that provide energy to living organisms.
Lipids are fats and oils that are important for insulation and energy storage. Proteins are complex molecules that carry out many functions in the body, such as catalyzing chemical reactions and providing structure to cells.
Nucleic acids are DNA and RNA, which carry genetic information and are essential for the synthesis of proteins.
Oxygen is another element that is essential to life on Earth. It is often found in organic molecules, especially in carbohydrates and lipids.
Oxygen is important for respiration, the process by which living organisms use energy stored in organic molecules to carry out cellular processes.
In respiration, oxygen reacts with organic molecules such as glucose to produce carbon dioxide, water, and energy in the form of ATP.
Organic molecules contain carbon and often hydrogen atoms bonded together, and they are the building blocks of life.
Carbon has the unique ability to form long chains of molecules, branched structures, and rings that are essential to the structure and function of organic molecules.
Oxygen is another element that is often found in organic molecules and is important for respiration.
to know more about organic molecules refer here:
https://brainly.com/question/10504103#
#SPJ11
explain how the reactions of glycolysis can be subdivided into preparatory, cleavage, and payoff phases.
The first reaction results in: the formation of two molecules of pyruvate,
while the second reaction: regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.
The reactions of glycolysis can be divided into three distinct phases: preparatory, cleavage, and payoff.
The preparatory phase is the first stage of glycolysis and involves two key steps: the conversion of glucose to glucose-6-phosphate and the isomerization of glucose-6-phosphate to fructose-6-phosphate. These reactions are important for ensuring that the glucose molecule is in a suitable form for the next phase.
The cleavage phase is the second stage of glycolysis. In this phase, a total of four high-energy phosphate bonds are formed and the glucose molecule is split into two three-carbon molecules, known as glyceraldehyde-3-phosphate.
Finally, the payoff phase is the last stage of glycolysis and involves two reactions. The first reaction results in the formation of two molecules of pyruvate, while the second reaction regenerates the molecules of ATP and NAD+ used in the preparatory and cleavage phases.
To know more about glycolysis refer here:
https://brainly.com/question/30828407#
#SPJ11
Which of the following weak acids would cause the greatest decrease in pH ? Acid(a):H2 S Acid (b): H2Se Because these are in/with the greater the the weaker the bond to H. The acid that will cause the greatest decrease in pH will be the with the which is Which of the following weak acids would have the smallest pKa ? Acid (a): H2 S Acid (b): H3P Because these are in/with , the greater the the weaker the bond to H. The acid with the smallest p Ka will be the with the which is
1. The acid that will cause the greatest decrease in pH will be H₂Se
2. The acid with the smallest pKa is Acid (b): H₃P.
What is pH?The H+ ion concentration's negative constant is known as pH. As a result, the meaning of pH is validated as the strength of hydrogen.
1. The acid that will cause the greatest decrease in pH will be the one with the smallest pKa. This is because the smaller the pKa, the stronger the acid. A stronger acid will release more H⁺ ions when dissolved in water and thus cause a greater decrease in pH. So, the correct option is b. H₂Se will have greatest decrease in pH.
2. The acid with the smallest pKa will be the one with the strongest bond to H. This is because the stronger the bond to H, the weaker the acid. A weaker acid will not release as many H⁺ ions when dissolved in water and thus have a smaller effect on pH. Therefore, the acid with the smallest pKa is Acid (b): H₃P.
Learn more about pH on:
https://brainly.com/question/172153
#SPJ11
A solution is prepared by taking 25.0 mL of a stock solution of NaOH and diluting it to a final volume of 350. mL. the molarity of the diluted solution is 0.042 m. Which of the following options correctly describe these solutions? select all that apply.
a. The portion of stock solution used contained 0.0147 moles of NaOH. b. The stock solution has a molarity of 0.59M. c. The stock solution has a molarity of 0.030M. d. The 350.mL of diluted solution contains 0.042 moles of NaOH
5. the chemical analysis of a binary hydrate shows that it is composed of 27.76% mn, 35.82% cl and 36.41% h2o. a. what is the formula of the hydrate? b. what is the name of the hydrate?
a. To determine the formula of the binary hydrate, we first need to find the number of moles of each element in the compound. We can assume that the hydrate contains one mole of water, so the percent composition of the anhydrous compound would be:
Mn: (27.76% / 54.94 g/mol) = 0.5057 mol
Cl: (35.82% / 35.45 g/mol) = 1.0096 mol
H2O: (36.41% / 18.02 g/mol) = 2.0228 mol
To find the ratio of the anhydrous compound to water, we need to divide each of these values by the smallest one, which is 0.5057 mol:
Mn: 0.5057 / 0.5057 = 1 mol
Cl: 1.0096 / 0.5057 = 1.996 mol
H2O: 2.0228 / 0.5057 = 4 mol
Therefore, the formula of the hydrate is MnCl2·4H2O.
b. The name of the hydrate can be determined by adding the prefix "tetra" to the name of the anhydrous compound (since there are four moles of water) and adding the word "hydrate" to the end. So the name of this hydrate is tetrahydrate manganese (II) chloride.
To know more about binary hydrate, refer here:
https://brainly.com/question/13564241#
#SPJ11
the little circle subscripts at the top of the deltag, deltah,and deltas represent standard conditions . these conditions correspond to
The little circle subscripts at the top of the deltag, deltah, and deltas represent standard conditions. These conditions correspond to the standard atmospheric pressure, temperature, and humidity respectively.
The standard atmospheric pressure is the average atmospheric pressure at mean sea level, which is 1.01325 bar. The standard temperature is 20°C (68°F), and the standard humidity is 0.00% relative humidity.
Atmospheric pressure is measured in bar and is the amount of force per unit area exerted by the atmosphere on a surface. It is affected by factors such as the weather and altitude. Temperature is a measure of the kinetic energy of the particles in a substance and is measured in degrees Celsius (°C). Humidity is the amount of moisture in the air and is measured in relative humidity (%), which is the ratio of the partial pressure of water vapor in the air to the saturated vapor pressure at a given temperature.
In chemistry and thermodynamics, the values of deltag, deltah, and deltas are often used to calculate the enthalpy, Gibbs free energy, and entropy changes associated with a chemical reaction. The standard conditions for these subscripts are the most common values used when calculating the thermodynamic properties of a reaction. Knowing the standard conditions is important for predicting the thermodynamic behavior of a system.
To know more about enthalpy click on below link :
https://brainly.com/question/13996238#
#SPJ11
the precise amount of air required for the complete combustion of a hydrocarbon can be calculated by considering the stoichiometric conversion of the hydrocarbon to co2 and h2o. determine the stoichiometric air-fuel ratios for combustion of cyclohexane, cyclohexene, and benzene.
The stoichiometric air-fuel ratios for the combustion of cyclohexane, cyclohexene, and benzene are 8:1, 9:1, and 17:1, respectively.
The stoichiometric air-fuel ratio for combustion of hydrocarbons, such as cyclohexane, cyclohexene, and benzene, is the amount of air necessary for complete combustion of the hydrocarbon.
This can be determined by considering the stoichiometric conversion of the hydrocarbon to carbon dioxide (CO2) and water (H2O).
For cyclohexane, the stoichiometric conversion is 8 moles of air to 1 mole of cyclohexane. This means the stoichiometric air-fuel ratio is 8:1.
Similarly, for cyclohexene, the stoichiometric conversion is 9 moles of air to 1 mole of cyclohexene.
Therefore, the stoichiometric air-fuel ratio for cyclohexene is 9:1. For benzene, the stoichiometric conversion is 17 moles of air to 1 mole of benzene. This yields a stoichiometric air-fuel ratio of 17:1.
In summary, the stoichiometric air-fuel ratios for the combustion of cyclohexane, cyclohexene, and benzene are 8:1, 9:1, and 17:1, respectively.
These ratios are important to consider when performing combustion calculations and are necessary for complete combustion of hydrocarbons.
to know more about stoichiometric refer here:
https://brainly.com/question/15047541#
#SPJ11
How much water, in grams, is needed to create 303 grams of hydrogen phosp better know as phosphoric acid?
To create 303 grams of hydrogen phosphoric acid, we need 246 grams of water. Phosphoric acid is a type of acid that is commonly used in the production of fertilizers, detergents, and other chemicals.
Phosphoric acid is also used in the food industry as a food additive. The molecular formula for phosphoric acid is H3PO4. It is a triprotic acid, meaning it can donate up to three hydrogen ions in solution. The balanced chemical equation for the reaction of water with phosphoric acid is as follows:H3PO4 + H2O → H3O+ + H2PO4-If we examine this equation, we can see that one mole of phosphoric acid reacts with one mole of water. The molar mass of phosphoric acid is 98 g/mol. Therefore, to create 98 grams of phosphoric acid, we would need 18 grams of water (which is one mole of water).
We are given that we need to create 303 grams of phosphoric acid. Therefore, we can use the following proportion to determine how much water we need: 98 g of phosphoric acid is to 18 g of water as 303 g of phosphoric acid is to x g of water Solving for x, we get: x = (18 g of water/98 g of phosphoric acid) * 303 g of phosphoric acid x = 55.173 grams of water
For more such questions on phosphoric acid, click on:
https://brainly.com/question/29947796
#SPJ11
what volume of 0.125 m nitric acid is required to completely neutralize 25.0 ml of 0.100 m barium hydroxide?
The volume of 0.125 M nitric acid that is required to completely neutralize 25.0 mL of 0.100 M barium hydroxide is 31.25 mL.
This can be calculated using the formula:
Molarity of acid x Volume of acid = Molarity of base x Volume of base
Given:
Molarity of nitric acid = 0.125 M
Volume of nitric acid = ?
Molarity of barium hydroxide = 0.100 M
Volume of barium hydroxide = 25.0 mL = 0.025 L
Using the formula:
0.125 V = 0.100 × 0.025
V = (0.100 × 0.025) / 0.125
V = 0.020 L or 20 mL
Therefore, the volume of 0.125 M nitric acid that is required to completely neutralize 25.0 mL of 0.100 M barium hydroxide is 31.25 mL.
To know more about neutralization, refer here:
https://brainly.com/question/15347368#
#SPJ11
Suppose that an ion has an absorption line at a rest wavelength of 1000.0 nm. this line is shifted to 1000.1 nm in the spectrum of a star. how fast is the star moving? hint: the doppler shift formula is (vrad/c)
The star is moving by a velocity of 3 *10^{5}.
The formula for the Doppler shift is given by
f2/f1 = (c-v)/c,
where c is the speed of light, v is the velocity of the moving object, and f1 and f2 are the emitted and received frequencies of light, respectively.
The Doppler effect occurs when the light source and the observer are moving relative to one another, giving the impression that the light's frequency has changed.
The Doppler effect alters the frequency of light from a moving source, shifting it either to the red or blue. This resembles (but does not necessarily mimic) the behavior of other types of waves, such as sound waves.
The star is moving away from the observer because the wavelength of the spectral line has shifted to a longer wavelength.
doppler shift
Thus, the velocity is given by the formula
:v/c = (Δλ/λ)
where is the rest wavelength and is the change in wavelength.
v/c = (Δλ/λ)v/c = (1000.1 - 1000.0)/1000.0v/c = 0.0001/1000.
0v/c = 1e-7v = (1e-7) × c = 300 × 1e-7 = 3e-5
The star is moving away from the observer at a velocity of[tex]3 *10^{5}[/tex]m/s.
To know more about the doppler effect https://brainly.com/question/15318474
#SPJ11
predict which of the following 0.1m solutions would have the lowest freezing point: mg(cl)2, catechin, or sucrose. explain your reasoning.
The freezing point of a 0.1m solution is determined by its solute concentration, and the type of solute affects the freezing point and it will be Catechin.
The lowest freezing point will be found in the solution with the lowest solute concentration.
In this case, catechin has the lowest solute concentration of 0.001 mol/L, so it will have the lowest freezing point.
The freezing point of a solution is also affected by the type of solute present.
Magnesium chloride (MgCl2) and sucrose both have high molecular weights, and therefore will decrease the freezing point more than catechin. Therefore, catechin will still have the lowest freezing point.
The freezing point of a solution can also be affected by the presence of electrolytes.
Magnesium chloride is an electrolyte, which means it will dissociate in water and lower the freezing point more than catechin or sucrose. Therefore, catechin still has the lowest freezing point.
In summary, catechin has the lowest freezing point of the three solutions (MgCl2, catechin, and sucrose) because it has the lowest solute concentration and does not contain any electrolytes.
To know more about Catechin, refer here:
https://brainly.com/question/29996352#
#SPJ11