calculate the equilibrium concentration of nh 3 . a mixture of 0.060 m n 2 and 0.040 m h 2 is heated to a temperature where k c

The true statement given about the bonding electrons is option b. "The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly".

Carbon dioxide is a linear molecule that consists of two oxygen atoms and one carbon atom. The C-O bond in [tex]CO_2[/tex] is polar, which means that the electrons are shared unequally between the atoms. As oxygen is more electronegative than carbon, it attracts the electrons more strongly, and hence, the bonding electrons spend more time around the O atom than the C atom.

In other words, option b is the correct statement about the bonding electrons in carbon dioxide ([tex]CO_2[/tex]) molecule.

Thus bonding electron spends more time around the O atom as it attracts the electrons more strongly than the C atom.

Therefore correct option is b. The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly.

To learn more about bonding refer to: https://brainly.com/question/30004630

#SPJ11

2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.

A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.

Molarity = moles of solute/volume of solution in liters

Molarity = 1.25 moles/0.550 L = 2.27 M

To know more about molarity, here:

https://brainly.com/question/31545539

#SPJ12

The correct answer is C. Silicon and Germanium are semiconductor elements. A semiconductor is a material that has properties of both an insulator and a conductor.

It can be used to create transistors, which are components that can be used to amplify or switch electronic signals.

Semiconductor elements are made up of different atoms that have at least four electrons in their outer shell. The four electrons are what gives them their semi-conductive properties.

Silicon and Germanium are two of the most common semiconductor elements.

Silicon is the most widely used semiconductor element. It has four electrons in its outer shell and is found in nature as a component of sand and quartz.

Silicon has the ability to easily form bonds with other atoms, which makes it a great choice for semiconductor devices.

Germanium is also a commonly used semiconductor element. It has four electrons in its outer shell and is a component of coal and many other minerals.

Germanium has a slightly higher electron mobility than Silicon, which makes it better suited for certain types of transistors.

In conclusion, Silicon and Germanium are semiconductor elements. They have four electrons in their outer shell and are used in transistors and other semiconductor devices.

Silicon is the most widely used semiconductor element due to its ability to form strong bonds with other atoms, while Germanium is better suited for certain types of transistors due to its higher electron mobility.

to know more about semiconductor refer here:

https://brainly.com/question/15184439#

#SPJ11

The molarity of the 4.46 L solution containing 9.38 mol of barium chlorate is 2.10 M.

The molarity of a solution is a measure of the concentration of a solute in the solution. It is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, we need to divide the number of moles of the solute by the volume of the solution in liters.

Given that the solution contains 9.38 mol of barium chlorate and has a volume of 4.46 L, we can calculate the molarity (M) as,

Molarity = Number of moles of solute / Volume of solution in liters

Molarity = 9.38 mol / 4.46 L

Molarity = 2.10 M

To know more about Barium Chlorate, here

brainly.com/question/15097261

#SPJ4

The interaction between the water and sodium ions and the water and bicarbonate ions is called a neutralization reaction.

In a chemical reaction, one or more substances (reactants) are changed into one or more new substances (products).

In this case, the reactants are the sodium ions, water, and bicarbonate ions, and the products are sodium bicarbonate, carbon dioxide, and water.

The chemical reaction that occurs when sodium ions and bicarbonate ions combine in water is a neutralization reaction. A neutralization reaction occurs when an acid and a base react together to form a salt and water.

In this reaction, the sodium ions (which act as a base) react with the bicarbonate ions (which act as an acid) to form sodium bicarbonate and water. As a result of this reaction, carbon dioxide is also released.

The reaction can be written as: Na+ + HCO3- → NaHCO3 + H2O + CO2

The interaction between the water and sodium ions and the water and bicarbonate ions is a chemical reaction called a neutralization reaction.

This reaction results in the formation of sodium bicarbonate, water, and carbon dioxide.

to know more about neutralization reaction refer here:

https://brainly.com/question/28970253#

#SPJ11

The number of moles of Na3PO4 that will be formed would be 2 moles.

The balanced chemical equation for the reaction between NaOH and H3PO4 is:

3 NaOH + H3PO4 → Na3PO4 + 3 H2O

According to the equation, 3 moles of NaOH react with 1 mole of H3PO4 to produce 1 mole of Na3PO4. Therefore, we can use this ratio to find out how many moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4:

Moles of Na3PO4 = (6 mol NaOH) x (1 mol Na3PO4 / 3 mol NaOH)

= 2 mol Na3PO4

So, 2 moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1

The vapor pressure above the solution is 80.7 torr.

To calculate the vapor pressure above the solution, we can use Raoult's law, which states that the vapor pressure of a solution is equal to the mole fraction of each component multiplied by its vapor pressure in pure state.

Assuming that methanol and ethanol behave ideally and have vapor pressures of 96.0 and 44.9 torr at their pure states, respectively, we can calculate the total vapor pressure above the solution as follows:

Calculate the total number of moles of solute (methanol and ethanol) in the solution:

4.54 mol methanol + 1.95 mol ethanol = 6.49 mol solute

Calculate mole fraction of each component in solution:

Mole fraction of methanol = 4.54 mol / 6.49 mol = 0.700

Mole fraction of ethanol = 1.95 mol / 6.49 mol = 0.300

Use Raoult's law to calculate the vapor pressure above the solution:

Vapor pressure above solution = (mole fraction of methanol x vapor pressure of methanol) + (mole fraction of ethanol x vapor pressure of ethanol)

Vapor pressure above solution = (0.700 x 96.0 torr) + (0.300 x 44.9 torr)

Vapor pressure above solution = 67.2 torr + 13.5 torr

Vapor pressure above solution = 80.7 torr

To know more about vapor pressure here

https://brainly.com/question/11864750

#SPJ4

In valence bond theory,

covalent

bonds are described in terms of the overlap of atomic or hybrid orbitals. This statement is true. Covalent bonds are described in terms of the overlap of atomic or hybrid orbitals

A covalent bond is a chemical bond that arises from the mutual sharing of electrons between atoms. It is formed when two atoms share a pair of electrons, with each atom contributing one electron to the pair.

In valence bond theory, covalent bonds are explained by the overlap of atomic or hybrid orbitals.

Orbitals

are regions of space around an atomic nucleus where an electron is most likely to be found.

An atomic orbital can hold a maximum of two electrons with opposite spins. Each atom has a certain number of valence electrons in its outermost shell.

These valence electrons can participate in the formation of chemical bonds.

During the formation of a covalent bond, the valence orbitals of the two atoms overlap with each other, allowing their valence

electrons

to interact and form a shared electron pair.

The degree of overlap between the atomic orbitals determines the strength of the covalent bond. The greater the overlap, the stronger the bond. The shape of the orbitals also affects the type of bond that is formed.

For example, when two s orbitals overlap, a sigma bond is formed, while when two p orbitals overlap, a pi bond is formed.

In hybrid orbitals, the orbitals of different shapes and energies can combine to form a new set of orbitals that are better suited for bonding.

In valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. This theory explains how atoms bond with each other and form new molecules.

to know more about

covalent

refer here:

https://brainly.com/question/30261436#

#SPJ11

you need to draw and label a flowchart and carry out a degree-of-freedom analysis of the reactor based on the extent of reaction, then calculate the total moles of gas in the reactor at equilibrium and the equilibrium mole fraction of hydrogen in the product.

If the mole fraction of hydrogen is significantly different from the calculated value, the discrepancy can likely be attributed to an imbalance between the reactants and products.

You can use a numerical method of your choice to take the input of the reactor temperature and the feed component mole fractions of CO, H2O, and CO2 to calculate the mole fraction H2 x in the product gas when equilibrium is reached.

From there, you can adjust the temperature and feed composition to maximize the yield of hydrogen.

To know more about mole fraction click on below link:

https://brainly.com/question/29808190#

#SPJ11

Acetaldehyde (CH3CHO) is a polar molecule due to its asymmetric shape and presence of polar covalent bonds.

The polarity is caused by the oxygen-hydrogen bond dipoles, as oxygen has a greater electronegativity than the hydrogen. This causes the oxygen to attract the electrons from the bond, creating a net dipole.

Acetaldehyde is a polar molecule. The polar character of a molecule is determined by the shape and polarity of its bonds. When the molecule has polar bonds and an asymmetrical shape, it is said to be polar. On the other hand, if it has no polar bonds or symmetrical shape, it is nonpolar.

Acetaldehyde is a polar molecule due to the electronegativity difference between carbon and oxygen, which creates a polar bond. It also has an asymmetrical shape due to the presence of two electronegative oxygen atoms on either side of the central carbon atom. As a result, acetaldehyde is soluble in polar solvents like water, ethanol, and acetone.

Read more about carcinogenic :

https://brainly.com/question/984334

#SPJ11

CsI  (cesium iodide) is expected to have a more negative enthalpy of solution compared to LiF (lithium fluoride), assuming the same solvent is used and the solvent-solute interactions are the same in both cases.

The enthalpy of solution is the energy released or absorbed when a solute dissolves in a solvent. The enthalpy of solution is negative if energy is released when the solute dissolves, indicating that the solution is exothermic.

CsI is expected to have a more negative enthalpy of solution compared to LiF because CsI has larger ions with a higher charge than LiF, and larger ions with higher charge tend to have stronger interactions with solvent molecules, leading to a more negative enthalpy of solution.

Learn about enthalpy here https://brainly.com/question/3836944

#SPJ1

Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.

1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.

To learn more about picric acid; https://brainly.com/question/14866072

#SPJ11

The solution to precipitate the barium ion, Ba²⁺, in a water sample is sodium sulfate.

The expected precipitate is BaSO4, or barium sulfate. Barium sulfate is an insoluble salt, which means that when sodium sulfate is added to the water sample, barium sulfate will form and settle out of the solution.

Sodium sulfate reacts with barium ions in the water sample to form the insoluble salt BaSO4 according to the following equation: Ba²⁺ + SO4²⁻ --> BaSO4. Since BaSO4 is insoluble in water, it will settle out of solution.

This process is known as precipitation. Precipitation occurs when a soluble compound is converted to an insoluble one.

To know more about Precipitation click on below link:

https://brainly.com/question/18109776#

#SPJ11

Answer: covalent networks

The mole fraction of sodium hypochlorite is 0.012.

To find the mole fraction of sodium hypochlorite (NaClO) in the solution, we need to first calculate the total number of moles of solute (NaClO) and solvent (water) in the solution.

Let's assume 1 L of solution. The number of moles of NaClO in the solution is equal to the concentration of NaClO multiplied by the volume of the solution:

moles of solute = concentration × volume = 0.650 mol/L × 1 L = 0.650 moles

Next, find the volume of the solute in the solution by multiplying the number of moles by its molar mass and dividing it buy its density.

volume of solute = number of moles x molar mass x density = 0.650 moles(74.44 g/mol) / ( 1.206 g/mL) = 40.121 mL

Therefore, there are 40.121 mL of solute in 1 liter of solution. Hence, the volume of water is:

volume of water = 1000 mL - 40.121 mL = 959.879 mL

Using the density of water and its molar mass, find the number of moles of water.

moles of water = 959.879 m(1 g/mL) / (18 g/mol) = 53.327 mol

Therefore, 1 liter of solution contains 0.650 moles of NaClO and 53.327 moles water. The mole fraction (χ) of NaClO is defined as the number of moles of NaClO divided by the total number of moles in the solution. Solving for the mole fraction of NaClO, we get:

mole fraction = 0.650 moles / (0.650 moles + 53.327 moles) = 0.012

Learn more about mole fraction here: https://brainly.com/question/14783710.

#SPJ11

The molecular shape is determined by the number of electron domains around a central atom where an electron domain can be a lone pair, a single bond, or a multiple bond.

The molecular geometry is determined by the type and number of electron domains on the central atom. The electron domain geometry is determined by the number of electron domains around the central atom.

Both the electron and molecular geometry of a compound can be identified using the VSEPR theory (Valence Shell Electron Pair Repulsion). The molecular geometry is determined by the type and number of electron domains on the central atom.

The electron domain geometry is determined by the number of electron domains around the central atom. Electron domains are regions of space around the central atom that contain an electron pair. When lone pairs or multiple bonds are present, these domains are also counted.

The electron domain geometry is the term used to describe the shape of the molecule based on the number of electron domains present on the central atom.

To know more about electrons, refer here:

https://brainly.com/question/29731362#

#SPJ11

The concentration of glycine in the given solution is 0.066 M.

Concentration is defined as the amount of solute per unit volume of the solution.

Thus, the formula for calculating the concentration (C) of a solution is:

C = n/V

Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.

The formula for calculating the number of moles of a solute is given as:

m = n x M

Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.

Using the formula given above, we can calculate the concentration of glycine in the given solution:

C = m/M x V

We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol

Substituting the given values, we get:

C = 15.0/75.07 × 0.330L= 0.066 M

Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.

To know more about concentration, refer here:

https://brainly.com/question/10725862#

#SPJ4

Answer: The electron configuration of a ground-state Cu atom is 1s22s22p63s23p64s13d10.

What is the electron configuration?

The electron configuration of an element indicates how its electrons are distributed in atomic orbitals. For each electron in an atom, the electron configuration describes the energy level, sublevel, and spin state. There are different techniques to determine the electron configuration of a ground-state Cu atom.

Here, we are going to follow the aufbau principle to find it. The Aufbau principle is a principle in which electrons are placed into the lowest available energy level. The following is the electron configuration of a ground-state Cu atom:1s22s22p63s23p64s13d10

Note: The ground state is when an atom has its electrons at their lowest possible energy levels. All electrons in an atom tend to be in the lowest energy orbitals possible to achieve the most stable configuration.

Learn more about Aufbau principle here:

https://brainly.com/question/13393709#



#SPJ11

Answer:

5.41 M

Explanation:

To calculate the molarity of a saturated solution of NaCl, we first need to calculate the amount of NaCl in the solution:

35.8 g of NaCl per 135.8 g of solution means that the mass of NaCl in the solution is:

mass of NaCl = 35.8 g

The density of the solution is 1.20 g/mL, so the volume of the solution can be calculated as:

volume of solution = mass of solution / density of solution

volume of solution = 135.8 g / 1.20 g/mL

volume of solution = 113.17 mL

Now we need to convert the volume of the solution to liters:

volume of solution = 113.17 mL = 0.11317 L

To calculate the molarity of the solution, we need to know the number of moles of NaCl in the solution. We can calculate this using the formula:

moles of solute = mass of solute / molar mass of solute

The molar mass of NaCl is 58.44 g/mol, so:

moles of NaCl = 35.8 g / 58.44 g/mol

moles of NaCl = 0.612 mol

Now we can calculate the molarity of the solution using the formula:

molarity = moles of solute / liters of solution

molarity = 0.612 mol / 0.11317 L

molarity ≈ 5.41 M

correct option is a. acetal. Fully reacting an aldehyde with alcohol will produce an acetal.

Acetals are organic compounds that have the general formula R2C (OR ') 2, where R and R' are alkyl groups. An acetal is formed by the reaction of an aldehyde with two equivalents of alcohol under acidic or basic conditions.

What is the reaction between aldehydes and alcohols?

The reaction of an aldehyde with alcohol produces an acetal. This reaction requires the presence of an acid catalyst to convert the alcohol to its corresponding alkoxide, which then reacts with the carbonyl group of the aldehyde to form the acetal.

In the reaction, the carbonyl group is transformed into an ether, and the alcohol is transformed into an ether. The reaction equation is:

Aldehyde + Alcohol + Acid → Acetal + Water

Therefore, the correct option is a) An acetal.

To learn more about aldehyde and ketone refer - https://brainly.com/question/29756072

#SPJ11

NADH is produced during the catabolic reactions of glycolysis, the Krebs cycle, and oxidative phosphorylation in the mitochondria.

NADH (Nicotinamide adenine dinucleotide) is an important molecule involved in cellular respiration and energy production. The production of NADH is dependent on the availability of oxygen and glucose, which serve as electron acceptors in these metabolic pathways.

However, under anaerobic conditions where oxygen is limited or unavailable, such as during intense exercise or in some microorganisms, NADH production may still occur through fermentation pathways. In these pathways, pyruvate is converted to lactate or ethanol, regenerating NAD+ to allow for further ATP production through glycolysis.

Learn more on chemical equilibrium here: https://brainly.com/question/5081082

#SPJ1

The density of the metal is 1.167 g/ml.

The density of the metal can be calculated using the formula for density, ρ:

ρ = m /v

where ρ is the density, m is the mass, and v is the volume.

In this case, the mass of the metal is 31.5g and the volume can be determined by subtracting the initial volume (51mL) from the final volume (78mL) of water in the graduated cylinder. Thus, the volume of the metal is 27mL.

Using the formula, the density of the metal is then:

ρ = 31.5 g / 27mL

ρ = 1.167 g/ml

This means that 1 mL of the metal has a mass of 1.167g. Density is an important property of materials, as it affects other properties such as buoyancy. Generally, materials with a higher density will sink in a liquid, while those with a lower density will float.

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

To determine the number of atoms in 15.0 grams of calcium, we need to calculate the molar mass of calcium.

The molar mass of calcium is 40.08 g/mol. This means that for every 1 mole of calcium, there are 40.08 grams. Since we have 15.0 grams of calcium, we can divide this by the molar mass to find the number of moles of calcium. 15.0 g / 40.08 g/mol = 0.37 moles of calcium. To find the number of atoms in 15.0 grams of calcium, we need to multiply the number of moles of calcium by Avogadro's number. 0.37 moles x 6.022 x 1023 atoms/mol = 2.223 x 1023 atoms of calcium.

Therefore, there are 2.223 x 1023 atoms of calcium in 15.0 grams of calcium.

For more questions on molar mass

https://brainly.com/question/21334167

#SPJ11

Answer:

The -CHO group is known as the aldehyde functional group. Here are some examples of organic compounds containing the -CHO functional group:

Methanal (formaldehyde)

Ethanal (acetaldehyde)

Propanal (propionaldehyde)

Butanal (butyraldehyde)

Pentanal (valeraldehyde)

IUPAC names of the requested compounds are:

4th member of carboxylic acid: butanoic acid

1st member of amide: formamide

3rd member of acid chloride: propanoyl chloride (also known as propionyl chloride)

The IUPAC name of the fourth member of the  series is Butanal

The "-CHO" functional group is known as an aldehyde, and it can be found in a variety of organic compounds. Here are some examples of compounds that contain the "-CHO" functional group:

Methanal (formaldehyde): CH2O

Ethanal (acetaldehyde): C2H4O

Propanal (propionaldehyde): C3H6O

Butanal (butyraldehyde): C4H8O

Pentanal (valeraldehyde): C5H10O

Hexanal (caproaldehyde): C6H12O

Heptanal (enanthic aldehyde): C7H14O

Octanal (caprylic aldehyde): C8H16O

Nonanal (pelargonic aldehyde): C9H18O

Decanal (capric aldehyde): C10H20O

Learn more about functional group:https://brainly.com/question/14618322

#SPJ1

The pH of the solution with a hydronium ion concentration of 6.3 × 10⁻¹² M is 11.20.

What is pH?

The acidity of a substance is measured by its pH, which is a measure of its acidity or alkalinity. The pH scale is a logarithmic scale ranging from 0 to 14, with a neutral pH of 7.

A substance with a pH less than 7 is acidic, while one with a pH greater than 7 is basic. A pH of 7 is considered neutral; any pH value below 7 indicates acidity, and any pH value above 7 indicates basicity.

The formula to determine the pH of a substance is as follows:

pH = - log10 [H+], where[H+] refers to the concentration of hydronium ions in the substance.

In the case of this question, the pH of the solution can be determined using the formula:

pH = -log10(6.3 × 10⁻¹²) = 11.20

Hence, the pH of the solution with hydronium ion concentration of 6.3 x 10-12 M is 11.20.



Learn more about ph level here:

https://brainly.com/question/1458045#

#SPJ11

Carbon and other types of matter can move through the environment through a combination of physical, biological, and human processes.

Matter, including carbon, can move through an environment in several ways, including:

Diffusion: Diffusion is the movement of particles from an area of high concentration to an area of low concentration. Carbon can diffuse through the air or water from areas where it is more concentrated to areas where it is less concentrated.

Advection: Advection is the movement of matter due to the flow of a fluid, such as air or water. Carbon can be transported through the environment by advection, for example, by wind carrying carbon particles or by water currents transporting dissolved carbon.

Biogeochemical cycling: Carbon can also be cycled through the environment by biological and geological processes. Plants and algae take up carbon dioxide from the air or dissolved carbon from water and convert it into organic matter through photosynthesis. This organic matter can then be consumed by other organisms, leading to the transfer of carbon through the food chain. Carbon can also be stored in soils and sediments for long periods of time.

Human activities: Human activities can also move carbon through the environment. For example, the burning of fossil fuels releases carbon dioxide into the atmosphere, which can then be transported by diffusion and advection. Land-use changes, such as deforestation, can also affect the cycling of carbon through the environment.

Learn more about matter here: https://brainly.com/question/3998772

#SPJ1

Answer: For a solution treated aluminum alloy, the aging needed to achieve a yield strength of 400 MPa would be 20 minutes.

What is solution heat treatment?

Solution heat treatment is a procedure used to dissolve a metal's alloying components in a solid solution. Solution heat treatment is used in the production of a homogeneous, single-phase microstructure that is free of precipitates or undissolved alloying components.

It is also known as homogenization in the metallurgical industry. The procedure generally involves heating the metal to a high temperature for an extended period of time, followed by rapid quenching or cooling to room temperature to freeze the solid solution in place.

What is the aging of alloys?

Aging of alloys is a post-heat treatment procedure in which an alloy is heated at a certain temperature and held for a certain length of time to promote the formation of precipitates in the metal.

This is the final heat treatment in the production of many metal alloys, and it can help to boost their strength and toughness by allowing the formation of a highly ordered and dispersed precipitate structure that resists dislocation movement and grain boundary migration. Precipitation hardening is another name for aging.



Learn more about electric field here:

https://brainly.com/question/5749278#


#SPJ11

Answer:

74g.

Explanation:

The volume won't increase by the volume of salt you added, though. This is for many different reasons among them the fact that salt is in grains (with lots of air in between) and the salt dissolving in the water and kind of squeezing in the spaces between water molecules. But the mass should increase by exactly the 19g you added.

Formation and dissociation constants are related in that they are inverses of each other and must have a product that equals the equilibrium constant of the reaction.

Formation and dissociation constants, also known as Kf and Kd respectively, represent the equilibrium concentrations of the reactants and products in a chemical reaction.

Kf is the constant of formation, which is the product of the concentrations of the products of the reaction, divided by the product of the concentrations of the reactants.

Kd is the dissociation constant, which is the product of the concentrations of the reactants, divided by the product of the concentrations of the products .

Kf and Kd are related in that the product of Kf and Kd must equal Kw, which is the equilibrium constant for the reaction.

The value of Kw is constant, meaning that regardless of the equilibrium concentrations of reactants and products, Kf and Kd must be inverses of each other such that the product of Kf and Kd must equal Kw.

Therefore, formation and dissociation constants are related in that they are inverses of each other and must have a product that equals the equilibrium constant of the reaction.

to know more about dissociation constants refer here:

https://brainly.com/question/28197409#

#SPJ11