binoculars contain prisms inside that reflect light entering at an angle largerthan the critical angle. if the index of refraction of a glass prism is 1.58, what is the critical angle for light entering the prism?

The capacitance of the first capacitor is 4.283 pF, and the capacitance of the second capacitor is 4.817 pF.

When two capacitors are connected in parallel, their equivalent capacitance is given by the equation:

Ceq = C1 + C2

Where C1 and C2 are the capacitances of the two capacitors connected in parallel.

When two capacitors are connected in series, their equivalent capacitance is given by the equation:

1 / Ceq = 1 / C1 + 1 / C2

Where C1 and C2 are the capacitances of the two capacitors connected in series.

Let the capacitances of the two capacitors be C1 and C2 respectively. According to the given information, when they are connected in parallel, their equivalent capacitance is 9.10 pF. Therefore,Ceq = C1 + C2 = 9.10 pf

Similarly, when they are connected in series, their equivalent capacitance is 1.61 pF. Therefore, 1/Ceq = 1/C1 + 1/C2⇒ 1/1.61 = 1/C1 + 1/C2⇒ 1/C1 + 1/C2 = 0.62111 ------(1)Substitute C2 = 9.10 - C1 in equation (1).⇒ 1/C1 + 1/(9.10 - C1) = 0.62111. Solve for C1.C1 = 4.283 pF. Therefore, C2 = 9.10 - C1 = 9.10 - 4.283 = 4.817 pF.

Know more about capacitance here:

https://brainly.com/question/28445252

3SPJ11

The area of each plate is approximately 5.39 × 10⁻⁶m².

The capacitance C of a parallel-plate capacitor is given by:

C = ε₀ * A / d

where ε₀ is the permittivity of free space (8.85 x 10⁻¹²F/m), A is the area of each plate, and d is the distance between the plates.

It is given that the capacitance C is 6.0 pF and the distance between the plates d is 8.0 mm.

First, need to convert the capacitance to Farads (F) from picofarads (pF):

6.0 pF = 6.0 × 10⁻¹²F

Substituting the given values into the capacitance equation, can get:

6.0 × 10⁻¹²F = (8.85 × 10⁻¹²F/m) * A / (8.0 × 10⁻³ m)

Solving for A, we get:

A = C * d / ε₀

A = (6.0 × 10⁻¹² F) * (8.0 × 10⁻³m) / (8.85 × 10⁻¹²F/m)

A ≈ 5.39 × 10⁻⁶m²

Therefore, the area of each plate would be approximately 5.39 × 10⁶m².

To know more about plate

https://brainly.com/question/28330249

#SPJ4

72 feet is the length of pendulum if π = 3.14 and the period is 9.42 seconds.

In the example question, the pendulum's period T (in seconds) is calculated as T = 2(L/32), where L is the pendulum's length (in feet).

The length must be determined if = 3.14 and the period is 9.42 seconds.

T = 9.42 seconds

Adding the values to the formula now:

9.42 = 2*3.14*√(L/32)

9.42 = 6.28*√(L/32)

6.28 divided on both sides gives us

√(L/32) = 1.5

square on both sides, we obtain

(L/32) = 2.25

32 multiplied on both sides gives us

L = 72

The length is therefore 72 feet if = 3.14 and the time period is 9.42 seconds.

To know about pendulum

https://brainly.com/question/14759840

#SPJ4

The Burrows-Wheeler transform (BWT) is a data compression method that groups similar characters together by reordering a string of letters. As a result, the converted string has longer same-character runs.

than the original string. The local repeating patterns of the original string are exposed in the BWT. The BWT operates by cyclically rotating the original string and lexicographically sorting the rotations. The BWT is built from the final character of each rotation. The BWT exposes the local repeating patterns in the original string by grouping related characters together. This characteristic makes string compression simpler since same-character runs may be encoded more efficiently. As a result of lexicographically sorting the rotations, the BWT obtains longer same-character runs.

learn more about  BWT  here:

https://brainly.com/question/24172857

#SPJ4

Answer: the average density of the combined world is 256/81 times the average density of the original two worlds.

Explanation:

The total mass of the two original worlds is 2M, and their average density is given by:

ρ0 = 2M/(4/3 πR^3) = 3M/(2πR^3)

The final radius of the combined world is 3/4R, so its volume is:

V = 4/3 π(3/4R)^3 = 27/64 πR^3

The mass of the combined world is still 2M, so its density is:

ρ = 2M/V = 128M/(27πR^3)

The ratio of the average density of the combined world to that of the original worlds is:

ρ/ρ0 = (128M/(27πR^3)) / (3M/(2πR^3)) = 256/81

1a. The change in government spending that is needed to close the inflationary gap is 5 billion dollars, and b. the change in taxes that is needed to close the inflationary gap is 40 billion dollars.

a. To answer this question, we need to use the following formula:

ΔY = MPC / (1 - MPC) * ΔG

where:

   ΔY is the change in output (in this case, the inflationary gap of 15 billion dollars)

   MPC is the marginal propensity to consume, which is given as 0.75

   ΔG is the change in government spending

To find the change in government spending, we can rearrange the formula as follows:

ΔG = ΔY * (1 - MPC) / MPC

Plugging in the given values, we get:

ΔG = 15 billion * (1 - 0.75) / 0.75

= 15 billion * 0.25 / 0.75

= 5 billion dollars

So the change in government spending that is needed to close the inflationary gap is 5 billion dollars.

b. To find the change in taxes, we can use the following formula:

ΔT = MPC / (1 - MPC) * ΔY - ΔG

where ΔT is the change in taxes

Plugging in the given values, we get:

ΔT = 0.75 / (1 - 0.75) * 15 billion - 5 billion

= 3 * 15 billion - 5 billion

= 40 billion dollars

Therefore, the change in taxes that is needed to close the inflationary gap is 40 billion dollars.

For question 2:

a. To answer this question, we can use the following formulas:

ΔY = MPC / (1 - MPC) * ΔG

where:

   ΔY is the change in output (in this case, the recessionary gap of 100 billion dollars)

   MPC is the marginal propensity to consume, which is given as 0.8

   ΔG is the change in government spending

To find the change in government spending, we can rearrange the formula as follows:

ΔG = ΔY * (1 - MPC) / MPC

Plugging in the given values, we get:

ΔG = 100 billion * (1 - 0.8) / 0.8

= 100 billion * 0.2 / 0.8

= 25 billion dollars

So the change in government spending that is needed to close the recessionary gap is 25 billion dollars.

b. To find the change in taxes, we can use the following formula:

ΔT = - MPC / (1 - MPC) * ΔY + ΔG

where ΔT is the change in taxes.

Plugging in the given values, we get:

ΔT = -0.8 / (1 - 0.8) * 100 billion + 25 billion

= -4 * 100 billion / 5 + 25 billion

= -80 billion + 25 billion

= -55 billion dollars

Therefore, the change in taxes that is needed to close the recessionary gap is a decrease of 55 billion dollars. This means that taxes would need to be reduced by 55 billion dollars to stimulate consumption and investment, and help close the recessionary gap.

Similarly you can use the same formulae for the other 3 questions:

3. a.  the change in government spending = 10 billion dollars;

b. the change in taxes = 800 billion dollars.

4. a. change in government spending = 5 billion dollars

b. the change in taxes  = 5 billion dollars

5. a. change in government spending = 120 billion dollars

b. change in taxes = 30 billion dollars

Learn more about recession and inflation here:

https://brainly.com/question/4210665

#SPJ1

The velocity of the airplane is approximately 69.84 m/s.

To find the velocity of the airplane flying at a standard sea level with a density of 1.23 kg/m³, static pressure of 1.01 x  [tex]10^{5}[/tex] N/m², and a pitot-static tube reading of 1.04 x  [tex]10^{5}[/tex] N/m², we can use Bernoulli's equation, which is applicable for steady, incompressible, and irrotational flow.

The Bernoulli's equation is given by: P₁ + 0.5ρV₁² + ρgh = P₂ + 0.5ρV₂² + ρgh₂ Since we're considering only horizontal flight, the potential energy terms (ρgh) can be canceled out. Additionally, since the pitot-static tube measures the total pressure (dynamic pressure + static pressure), P₂ is the total pressure (1.04 x  [tex]10^{5}[/tex] N/m²), and P₁ is the static pressure (1.01 x 10^5 N/m²).

The density ρ is given as 1.23 kg/m³. Now, rearrange the equation to solve for V₁ (the velocity of the airplane): V₁² = 2(P₂ - P₁) / ρ Substitute the given values: V₁² = 2(1.04 x [tex]10^{5}[/tex] N/m² - 1.01 x  [tex]10^{5}[/tex] N/m²) / 1.23 kg/m³ Calculate the result: V₁² = 2(3 x 10 N/m²) / 1.23 kg/m³ V₁² ≈ 4878.05 m²/s² Now, take the square root to find the velocity: V₁ = √4878.05 m²/s² ≈ 69.84 m/s

To know more about velocity refer here:

https://brainly.com/question/17127206#

#SPJ11

Answer:

I = 0,23 A

P = 3,45 W

Explanation:

Given:

V1 = 1,5 V

P1 = 345 mW = 0,345 W

V2 = 15 V

We know that:

P1 = V1 × I

From here, we can make I the subject and find the current:

I = P1/V1

I = 0,345/1,5 = 0,23 A

P2 = V2 × I

P2 = 15 × 0,23 = 3,45 W

The current going through the circuit when a battery with voltage 1.5 V is connected to a fan that uses 345 mW of power is 0.23 A and the power used by the fan now is 34.5 W.

1. To find the current going through the circuit with a 1.5 V battery, we can use the formula P = VI, where P is power, V is voltage, and I is current. Rearrange the formula to solve for I: I = P/V.

With a 1.5 V battery: Power (P) = 345 mW = 0.345 W (converted from milliwatts to watts), and
Voltage (V) = 1.5 V

I = P/V = 0.345 W / 1.5 V = 0.23 A
The current going through the circuit is 0.23 A.

2. If the fan is connected to a battery with V=15 V and we assume that the resistance of the fan remains constant, we can use Ohm's law (V = IR) to find the new current and then find the new power.

First, find the resistance (R): R = V/I = 1.5 V / 0.23 A ≈ 6.52 Ω
Now, find the new current with V=15 V: [tex]I_{new}[/tex] = V/R = 15 V / 6.52 Ω ≈ 2.3 A
Finally, find the power now: P = VI = 15 V * 2.3 A ≈ 34.5 W

When the fan is connected to a battery with V=15 V, it uses 34.5 W of power.

To know more about voltage , refer here

https://brainly.com/question/13521443#

#SPJ11

The value that is measured by the slope of a position-time graph is velocity. It is a vector quantity that measures the rate of change of an object's position.

It is calculated by taking the slope of a position-time graph which can be done by finding the change in position (displacement) divided by the change in time. Velocity is determined by the distance an object moves in a given period of time and its direction of motion. An object's velocity is constantly changing as it accelerates, decelerates, and changes direction.

The formula for velocity is velocity = displacement/time.

Velocity can be represented by a line on the graph that is parallel to the x-axis and has a slope that is equal to the velocity of the object.

To learn more about velocity click here https://brainly.com/question/17127206

#SPJ1

complete question: Please select the word from the list that best fits the definition: Value that is measured by the slope of a position-time graph.

a) Momentum

b) Velocity

c) Acceleration

d) Displacement

Explanation:

If ignoring air friction, the horizontal component will not change.

If taking air friction into account, then horizontal component will decay.

The horizontal component of the velocity of a projectile changes with time due to the force of gravity acting on the projectile. Initially, the projectile will have a constant horizontal velocity, as there is no net force acting on it in the horizontal direction.

However, once the projectile is fired, the force of gravity will begin to act on it, causing its horizontal velocity to decrease. This decrease in horizontal velocity is due to the fact that gravity is an acceleration, which means that it will cause the projectile to slow down over time.

As the projectile moves further away from the point of launch, its horizontal velocity will continue to decrease until it reaches its terminal velocity. At this point, the horizontal velocity of the projectile will remain constant and will not change with time.

Know more about velocity here

https://brainly.com/question/17127206#

#SPJ11

Answer:

engaging in more exercise

Explanation:

Maladaptive means not providing an adequate or appropriate adjustment to the environment or situation. Therefore the question is asking which is Not a bad way to respond to stress.

Refraction occurs when light encounters an air-to-water interface or boundary where the coefficient of refraction shifts, causing the light to shift orientation as it travels from one medium to another.

The angle of incidence and the variation in the coefficients of refraction between the two surfaces determine how much refraction takes place.

Some of the light will be reflected into the air and the remainder will be refracted into the water if the angle of contact is less than the crucial angle.

Total internal reflection takes place and all of the light is mirrored back into the air if the angle of contact exceeds the critical angle.

Learn more about refraction changes at

https://brainly.com/question/12068475

#SPJ4

To generate the observed effect, the professor most likely altered the phase relationship of the speakers. Interference between waves of the same frequency and amplitude can occur in sound waves,

resulting in either constructive or destructive interference. The lecturer altered the time of the waves arriving at different spots in the classroom by modifying the phase relationship of the speakers. When the waves were in phase, they constructively added together and generated a loud tone for certain pupils. When the waves were out of phase, they destructively cancelled each other out and generated no sound for the pupils who had initially heard the booming tone. This is known as interference, and it happens not just in sound waves but also in other forms of waves, such as light waves. as light and water waves. Understanding interference is important in many areas of physics, including acoustics, optics, and communications.

learn more about   sound waves here:

https://brainly.com/question/21995826

#SPJ4

The work done by the external agent to bring the plates  of a capacitor closer together is about 0.625 μJ.

The work done by an external agent to move the plates of a capacitor is given by:

W = (1/2) * C * (Vf² - Vi²)

where W is the work done, C is the capacitance, Vf is the final voltage, and Vi is the initial voltage.

Initially, the capacitance of the capacitor is 5.0 μF and it is charged to 5 μC. Therefore, the initial voltage across the capacitor is:

Vi = Q / C = 5 μC / 5.0 μF = 1 V

When the plates are brought closer together, the capacitance of the capacitor becomes 10 μF, but the charge on the capacitor remains the same. Therefore, the final voltage across the capacitor is:

Vf = Q / C' = 5 μC / 10 μF = 0.5 V

Substituting these values into the equation for work, may get:

W = (1/2) * 5.0 μF * (0.5² - 1²) = 0.625 μJ

Therefore, the work done by the external agent to bring the plates closer together would be about 0.625 μJ.

To know more about capacitor

https://brainly.com/question/30907741

#SPJ4

When the width of the slit is decreased in a single-slit experiment, the width of the central band would increase. This phenomenon is known as diffraction.

A single-slit experiment is an experiment in which a beam of light is allowed to pass through a narrow slit and fall on a screen placed at some distance from the slit. The light waves are diffracted as they pass through the slit, and the diffracted waves interfere with one another, producing a pattern of light and dark bands on the screen. The diffraction pattern produced by a single-slit experiment is affected by the width of the slit.

When the width of the slit is decreased, the width of the central band increases. This is because the waves diffracted through a narrow slit spread out more, causing the central band to become wider. To put it another way, the narrower the slit, the more the light waves are diffracted. This diffraction effect produces a wider central band. Therefore, the width of the central band increases when the slit width is decreased.

To learn more about Diffraction ;

https://brainly.com/question/8645206

#SPJ11

Answer:

The angle of refraction is the angle made by a refracted ray with perpendicular to the refracting surface.

n = sin(i)/sin(r)

= sin(45 deg)/sin(30 deg)

= sqrt(2)

= 1.41

The line integral is zero for path A, proportional to the magnitude for path B, and depends on the angle for path C.

The line basic of a vector field addresses the amount of scalar results of the vector field and minuscule relocation along a way or bend.  For a uniform attractive field, the line vital along way A, which is opposite to the attractive field, is zero. Along way B, which is lined up with the attractive field, the line vital is non-zero and is relative to the size of the attractive field and the length of the way.

Along way C, which is bended and not equal or opposite to the attractive field, the line basic relies upon the point between the way and the attractive field at each point. In the event that the point is consistent along the way, the line essential will be corresponding to the size of the attractive field and the length of the way.

To learn more about displacements, refer:

https://brainly.com/question/17044076

#SPJ4

The current needed for the solenoid is 599.17 A.

To determine the current needed for the solenoid, we can use the equation for the magnetic field strength inside a solenoid: B = μ₀ * n * I

where B is the magnetic field strength, μ₀ is the permeability of free space [tex](4π x 10^-7 Tm/A)[/tex], n is the number of turns per unit length of the solenoid, and I is the current.

First, let's calculate the number of turns per unit length of the solenoid:

n = N / L

where N is the total number of turns and L is the length of the solenoid. Since the solenoid has a single layer of wire, we can use the equation:

N = π * r² * ρ / (d² * p)

where r is the radius of the solenoid (0.75/2 = 0.375 m), ρ is the resistivity of the wire (assuming it's a Type II superconductor with zero resistance, we can take ρ to be zero), d is the diameter of the wire (2.50 mm = 0.0025 m), and p is the pitch of the wire (equal to the diameter of the wire, so p = 0.0025 m).

Substituting in these values, we get:

N = π * (0.375 m)² * 0 / (0.0025 m)² * 0.0025 m

N = 1414.16

So the number of turns per unit length is:

n = 1414.16 / 1.8 m

n = 785.65 turns/m

Now we can substitute in the values for B and n, and solve for I:

B = μ₀ * n * I

I = B / (μ₀ * n)

Substituting B = 1.5 T and the values for μ₀ and n, we get:

[tex]I = 1.5 T / (4π x 10^-7 Tm/A * 785.65 turns/m)[/tex]

I = 599.17 A

So the current needed for the solenoid is 599.17 A.

To learn more about current here:

https://brainly.com/question/13076734

#SPJ11

When the air inside a balloon is heated and its volume is held constant, the pressure increases, causing an increase in the number of air molecules inside the balloon.

When the air inside a balloon is heated, the temperature of the air increases, causing the air molecules to gain kinetic energy and move faster. As the molecules move faster, they collide with each other and the walls of the balloon more frequently, exerting a greater force on the walls.

If the volume of the balloon remains constant, the pressure inside the balloon will increase as a result of the increase in temperature. This increase in pressure causes the air molecules to move more vigorously and spread out. However, if we assume that the volume of the balloon remains constant, the air molecules do not have any extra space to move into. Therefore, the pressure increase will lead to an increase in the number of air molecules inside the balloon.

This can be explained by the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature. Assuming that the volume of the balloon is constant and the amount of air (moles of gas) inside the balloon remains the same, an increase in temperature will lead to an increase in pressure. Therefore, to satisfy the ideal gas law, the number of air molecules inside the balloon must increase.

To learn more about molecules

https://brainly.com/question/19922822

#SPJ4

When eight 7.0 W Christmas tree lights are connected in series to each other and to a 120 V source, the resistance of each bulb is 240 Ω.

What is a series circuit?A circuit that has only one pathway for the flow of electric current is called a series circuit. It means that in a series circuit, all the electrical elements are connected one after the other, and the current flows through each component in turn.

As a result, the current is equal throughout the circuit, and the sum of the voltages across each element equals the total voltage of the circuit.The current is the same in all resistors in a series circuit. The voltage is different across each resistor, but the sum of the voltage drops across all of the resistors in the circuit is equal to the applied voltage.

Voltage across each bulb:The voltage across each bulb is not the same in a series circuit. However, the sum of all the voltages across each bulb adds up to the total voltage of the circuit. Here, the total voltage of the circuit is 120 V. Therefore, the voltage across each bulb is 15 V (120/8=15).Resistance of each bulb:

We use Ohm's law, which states that resistance is equal to voltage divided by current, to calculate the resistance of each bulb. In this example, we have the voltage across each bulb, which is 15 V. We can calculate the current flowing through the circuit by dividing the total voltage by the total resistance, which is the resistance of a single bulb multiplied by the total number of bulbs.

The current flowing through the circuit is 0.5 A (120/240=0.5).We can now determine the resistance of each bulb by dividing the voltage across each bulb by the current flowing through it. Resistance of each bulb is 30 Ω (15/0.5=30).Answer: 30 Ω

To Learn More About 120 V source

https://brainly.com/question/29353481

#SPJ11

If the neutral of an unbalanced three-wire system is opened, the circuit becomes a 240 V open circuit. Since the line with the smaller load has a lower resistance, more than half the total voltage drops across it. That is, voltage rises above 120 volts.

When a neutral of an unbalanced three-wire system is opened, the circuit becomes a 240 V open circuit. This means that the voltage between the two hot wires (or line wires) in the circuit becomes 240 V.
In an unbalanced three-wire system, the current flows through both line wires and the neutral wire. The neutral wire carries the unbalanced current, which means it carries the difference between the current flowing through the two line wires. If the neutral wire is opened, the circuit becomes unbalanced because the current flowing through the two line wires is no longer equal. This causes the voltage between the two line wires to increase to 240 V.
Since the line with the smaller load has a lower resistance, it offers less opposition to the flow of current. This means that more current flows through this line, causing the voltage across this line to increase. The voltage across the other line decreases accordingly. If the load on one line is much greater than the load on the other line, then more than half the total voltage drops across the line with the smaller load. This causes the voltage on this line to rise above 120 volts.

For more such questions on open circuit

brainly.com/question/30464968

#SPJ11

The electric field amplitude of the electromagnetic wave is approximately [tex]6.3 * 10^5[/tex] volts per meter.

The electric field amplitude (E) of an electromagnetic wave can be calculated from the magnetic field amplitude (B) using the equation:

E = c * B

Where c is the speed of light in a vacuum, which is approximately 3 x [tex]10^8 \\[/tex]meters per second.

Using the given magnetic field amplitude of 2.1mT, we can convert it to SI units of Tesla by multiplying it by[tex]10^-3[/tex]:

B = 2.1 mT = 2.1 x 10^-3 T

Then, we can calculate the electric field amplitude by multiplying the magnetic field amplitude by the speed of light:

[tex]E = c * B = (3 x 10^8 m/s) * (2.1 x 10^-3 T) ≈ 6.3 x 10^5 V/m[/tex]

Therefore, the electric field amplitude of the electromagnetic wave is approximately 6.3 x 10^5 volts per meter.

To learn more about  electromagnetic wave here:

https://brainly.com/question/3101711

#SPJ11

Answer:

The average speed of the lizard was 2.25 meters per second.

Explanation:

To find the average speed of the lizard, we need to use the formula:

Average speed = Total distance ÷ Total time

First, we need to find the total distance the lizard ran. He ran 3.0 meters to his friend's house and then ran back halfway, so he ran a total distance of:

3.0 + (1/2)3.0 = 4.5 meters

Next, we need to find the total time it took the lizard to run this distance. We're told that it took 2.0 seconds in total, so the time for the first leg of the journey (from the rock to his friend's house) must have been half of that, or 1.0 second. The time for the second leg (from his friend's house back to the rock) must also have been 1.0 second.

Now we can plug in the values into the formula:

Average speed = Total distance ÷ Total time

Average speed = 4.5 meters ÷ 2.0 seconds

Average speed = 2.25 meters per second

Explanation:

Average speed =3.0 × 2.0

= 6.0

The period of oscillation for the spring/mass system described by the equation x(t) = a sin(ωt) is 2π seconds, which is the time taken for the system to complete one full cycle of oscillation.

The position of a spring/mass system is given by the equation:

x(t) = a sin(ωt)

where x is the displacement of the mass from its equilibrium position, a is the amplitude of the oscillation, ω is the angular frequency, and t is time in seconds.

The period of oscillation, T, is defined as the time taken for the system to complete one full cycle of oscillation, i.e., for the mass to move from its initial position, through its maximum displacement, back to its initial position. Mathematically, we can express the period as:

T = 2π / ω

where ω is the angular frequency of the oscillation.

To find the period of the spring/mass system described by the equation x(t) = a sin(ωt), we need to determine the value of ω. Comparing this equation to the standard form of a sinusoidal wave, y = A sin(ωt + φ), we can see that ω is the coefficient of t inside the sine function, i.e., ω = 2π / T.

In our equation x(t) = a sin(ωt), ω is the coefficient of t, which is just ω = 1. Therefore, we can determine the period of oscillation as:

T = 2π / ω

= 2π / 1

= 2π seconds

To learn more about oscillation

https://brainly.com/question/30111348

#SPJ4

It does not experience any changes in speed during its orbit. So, the correct option is: an object on a perfectly circular orbit has an eccentricity of 0.

An object on a perfectly circular orbit has an eccentricity of 0.What is an orbit?An orbit is the path of an object or particle that is moving in space, generally around a more massive object, due to the influence of gravity.What is eccentricity?The eccentricity of an elliptical orbit is the ratio of the distance between the foci of the ellipse to the length of its major axis.What happens to speed during an orbit?During an orbit, the speed of an object can vary depending on its distance from the massive object it is orbiting.According to the question above, an object on a perfectly circular orbit has an eccentricity of 0.

Learn more about orbit here:

https://brainly.com/question/29642622

#SPJ4

Answer: The x-component of the acceleration is [tex]-0.45m/s^{2}[/tex]

There u go (:

The current going through the Amperian loop is approximately 0.67 A.

We have to Compute the cross-sectional area of the whole wire to determine the current flowing through the Amperian loop:

Since the radius of the wire is 6 cm, the area A_total is given by the formula

A_total = πr² = π(6 cm)² ≈ 113.1 cm².

The current is distributed uniformly over the wire's cross-sectional area. The total current is 6 A, so the current density J is given by

J = I_total / A_total = 6 A / 113.1 cm² ≈ 0.053 A/cm².

The Amperian loop is concentric to the wire and passes through point P, which is 2 cm from the center. The area A_loop is given by

A_loop = πr² = π(2 cm)² ≈ 12.57 cm².

The current density J is constant across the wire's cross-sectional area, so the current I_loop through the Amperian loop is given by

I_loop = J × A_loop = 0.053 A/cm² × 12.57 cm² ≈ 0.67 A.

So, 0.67 A  is The current flowing through the Amperian loop.

For more such questions on current, click on:

https://brainly.com/question/22971286

#SPJ11

Answer:

The bottom.(support)

Explanation: Because everything is based on the support if the support fails everything fails, so if the support fails usually it is nearest to the ground, it will fall first.

Answer: The bottom because that's what's carring all the weight of the building.

Explanation:

Joules of energy required to heat 145.0 g of water from 14°C to boiling (100°C) is : 53,972.48 Joules of energy

Amount of energy that is transferred from one system to surroundings because of temperature difference is called heat.

A we know : Q = m c ΔT

Q is amount of heat energy required (in joules) ; m is mass of the water (in grams) ; c is specific heat capacity of water (4.184 J/g°C) ; ΔT is change in temperature (in °C)

ΔT = final temperature - initial temperature

= 100°C - 14°C

ΔT = 86°C

As Q = m c ΔT

= 145.0 g * 4.184 J/g°C * 86°C

Q = 53,972.48 J

Therefore, approximately 53,972.48 joules of energy are required to heat 145.0 g of water from 14°C to boiling (100°C).

To know more about heat energy, refer

https://brainly.com/question/25603269

#SPJ1