The rate of reaction refers to how fast or slow a reaction is. The rate of reaction can be increased by;
i) Using finely divided sodium carbonate
ii) Increasing the temperature
Rate of reactionThee term rate of reaction refers to the pace of a chemical reaction. A reaction could be fast or slow.
To increase the rate of this reaction;
i) The sodium bicarbonate could be used in the finely divided form.
ii) The temperature could be raised.
Learn more about rate of reaction: https://brainly.com/question/13440548
What is a base used in deodorants? sorbitol carrageenan magnesium hydroxide sodium lauryl sulfate
The base used in deodorants is magnesium hydroxide. This is further explained below. Option B is correct.
What is base?Generally, A base is a chemical that reacts with hydrogen ions to neutralize an acid, a base ranges from 7-14 in the pH range
In conclusion, In deodorants, magnesium hydroxide is utilized as a base. The function of the base is to neutralize the acid released in our mouth by bacteria, which causes tooth decay and other associated problems.
Read more about Compound
https://brainly.com/question/704297
Answer:
C. magnesium hydroxide
Explanation:
Edge
What is the percentage by mass of water in the compound FeCl3 • 6H20 ?
Answer:
52.12%
Explanation:
First you need to find the mass of the total molecule. The mass of one atom of Fe is 55.847. The mass of one atom of Cl is 35.453. The mass of O is 16.00, and the mass of H is 1.00. The mass of the whole atom is calculated as follows:
55.847 + 3(35.453) + 6(16.00)+ 12(1.00) = 270.206.
Next calculate the mass of water in the molecule:
(2)1.00 + 16.00 = 18.00(6 molecules) = 108
Finally, divide the mass of water by the mass of the whole molecule and multiply by 100 to get it as a percent:
108/207.206 = 0.52122 x 100 = 52.12%
under what temperature will volume of gas at 0 degree celcius double itself if the pressire is kept constant ????
Answer:
273.15° C
Explanation: Ideal gasses tend to double in volume when their temperature doubles. 0°C = 273.15K so double 273.15 gives 546.3K.
Converting back to Celcius
546.3-273.15 =273.15°C
50 points Acids & Bases
please help me children
#1
HCl+NaOH—»H_2O+NaCl#2
KOH+HNO_3—»KNO_3+HCl#3
H_2CO_3+Mg(OH)_2—»MgCO_3+H_2O#4
Al(OH)_3+HCl—»AlCl_3+H_2OAccording to the diagram below, what is the correct order of waves from least energy to most energy?
a) gamma rays, X rays, Visible light, microwaves
b) Microwaves, Visible light, X rays, Gamma rays
c) Visible light, X rays, Gamma rays, Microwaves
d) X rays, Gamma rays, Microwaves, Visible light
b) Microwaves, Visible light, X rays, Gamma rays
5 points IF U ANSWER THE QUESTION CORRECTLY
Why does everyone in the world hate u? No matter what u do or say ur never perfect enough for them why is that?
Answer:
No matter how well how much you accomplish, or how much good you put into the world, you will always have haters. An unfortunate aspect of life is that some people hate when others do well.It’s just a way of life.some people just are jealous but dont let people brake you down.
Explanation:
hope this helps
Which of the following best describes the difference between a mixture and a pure substance? A. A mixture has the same properties throughout; a pure substance has the different properties throughout. B. A mixture has different properties throughout; a pure substance has the same properties throughout. C. A mixture is made up of more than one type of atom; a pure substance is made up of only one type of atom. D. A mixture is made up of only one type of atom; a pure substance is made up of more than one type of atom.
Answer:
B. A mixture has different properties throughout; a pure substance has the same properties throughout
Explanation:
Which of the following best describes the difference between a mixture and a pure substance?
A. A mixture has the same properties throughout; a pure substance has the different properties throughout.
B. A mixture has different properties throughout; a pure substance has the same properties throughout.
C. A mixture is made up of more than one type of atom; a pure substance is made up of only one type of atom. ✓
A mixture consists of two or more than two type of substance in a not so balanced ratio while a pure substance is made up of only one kind of substance in a fixed ratio.D. A mixture is made up of only one type of atom; a pure substance is made up of more than one type of atom.
How many major layers of atmosphere does earth have
An ion has 56 protons, 54 electrons, and 81 neutrons. What is its atomic number ?
The Atomic Number indicates the number of protons = 56
What volume of 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid?
Taking into account the definition of dilution, 83.3 mL of 0.0833 Lof 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid.
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.
Dilution is the process of reducing the concentration of solute in solution, which is accomplished by simply adding more solvent to the solution at the same amount of solute.
In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume (and weight) of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeInitial volumeIn this case, you know:
Ci= 12 MVi= ?Cf= 1 MVf= 1 LReplacing in the definition of dilution:
12 M× Vi= 1 M× 1 L
Solving:
(1 M× 1 L)÷ 12 M= Vi
0.0833 L= 83.3 mL= Vi (being 1 L= 1000 mL)
In summary, 83.3 mL of 0.0833 Lof 12 molar hydrochloric acid would be needed to create 1 L of a 1 molar solution of hydrochloric acid.
Learn more about dilution:
brainly.com/question/6692004
brainly.com/question/16343005
brainly.com/question/24709069
#SPJ1
Part One:
Electromagnetic waves can carry more data at higher frequencies. Why would a scientist opt to transmit data at a lower frequency instead?
What are the limitations of sending information using electromagnetic waves?
What are the differences between analog and digital signals?
What are the advantages of using digital signals over analog signals?
Using reliable internet sources, identify three ways we use analog and digital signals in our everyday lives.
Part Two:
Describe how radio telescopes are used to explore space.
Using reliable internet resources, identify ways we use radio waves on Earth.
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis? (Hint: What did the article say about the advantages of digital signals?)
Electromagnetic waves such as radio waves are used in information transmission either as digital or analogy signals.
What are electromagnetic waves?Electromagnetic waves are waves which are produced from the interactionof the electric and magnetic fields.
Transmitting data at lower frequencies enables the waves to travel longer distances than at higher frequencies, therefore scientists usually transmit data at a lower frequencies.
The limitations of transmitting information using electromagnetic waves include a limited number of broadcast frequencies and interference of waves.
Analog signals differ from digital signals in that analog signals have continuous electrical signals while digital signals have non-continuous electrical signals.
Digital signals over analog signals is that it transmits more information per second than analog signals Analog and digital signals are employed in mobile devices, television, radio, computers and the internet
A radio telescope is used to receive radio waves from astronomical radio sources in space.
It has several parts such as a dish and antenna,a receiver,a detector and an analyzer. The dish collects and focuses radio signals on the antenna and the information is processed by the receiver, detector and analyzer.
Radios waves are used for the transmission of radio and television signals.
Radio telescopes convert radio waves which are analog signals to electrical signals wgich are digital siagnals because it can be easily stored and transmitted in digital form.
Therefore, electromagnetic waves such as radio waves are used in information transmission.
Learn more about electromagnet waves at: https://brainly.com/question/25847009
A potential energy diagram is shown
What is the total change in enthalpy of this reaction?
we know that,
AᵣH = (Sum of enthalpies of products)-(Sum of enthalpies of reactants)
AᵣH = 55kJ - 30 kJ
AᵣH = 25kJ
or
AᵣH =( Activation Energy-Reactant energy) +( Activation Energy-product energy)
AᵣH =(65kJ -30kJ) +(65kJ-55kJ)
Since there's a degrade , we'll consider the PE of product as -veAᵣH = 35kJ - 10kJ
AᵣH = 25kJ
Answer:
B. 25 kj
Explanation:
Products-reactants
I took the exam
What elements does hydrogen form hydrogen bonds with?
Answer:
nitrogen, oxygen, and fluorine.
Explanation:
Hydrogen bonding occurs where hydrogen is bound to STRONGLY electronegative elements, viz. nitrogen, oxygen, and fluorine. Explanation: See this answer. You should also compare the boiling points of N H 3, OH 2, and H F, with the hydrides of the lower Group. i.e. P H 3,SH 2 etc.
Answer:
Hydrogen forms bonds with Nitrogen, Oxygen and Fluorine.
Explanation:
Hydrogen bonding occurs only in molecules where hydrogen is covalently bonded to one of the above three elements.
Which is the following is a decomposition reaction
The equation that is a decomposition reaction is
PbCO3(s) ---> PbO(s) + CO2(g)
That is option D. The properties of a decomposition reaction can further be understood below.
Properties of a decomposition reactionA chemical reaction is defined as the combination of substances called reactants to form a product. The various types of chemical reaction include:
synthesis reactioncombustion reactiondecomposition reactionsingle or double replacement reactionDecomposition reaction is that type of chemical reaction in which the reactant breaks down to form two or more products.
Therefore the heating of lead (II) carbonate is a decomposition reaction.
Learn more about decomposition reaction here:
https://brainly.com/question/15229375
Calculate the solubility of carbon dioxide at 400 kPa.
Select one:
O a. 9.48 CO2/L
O b. 0.61 CO2/L
O c. 94.87 CO2/L
O d. 6.08 CO2/L
The solubility of carbon dioxide at 400 kPa at room temperature is ;
( B ) 0.61 CO2/L
Given data
pressure of CO₂ = 400 Kpa = 3.95 atm
Kh of CO₂ = 3.3 * 10⁻² mol/L.atm
Calculate the solubility of carbon dioxideSolubility = pressure * Kh value of CO₂
= 3.95 atm * 3.3 * 10⁻² mol / L.atm
= 0.13 mol/l CO₂
= 0.61 CO₂ / L
Hence we can conclude that the solubility of CO₂ at 400 kPa is 0.13 mol/l CO₂.
Learn more about solubility : https://brainly.com/question/23946616
From the options the closest answer is ( B ) 0.61 CO₂ / L
A stock solution is 5.00 M. How much of the stock solution in mL should you dilute to 100 mL, to make a 0.200 M solution
Answer:
4ml
Explanation:
using;C1V1=C2V2
5V1=0.2×100
5V1=20
V1=20/5
V1=4ml
A chemist needs to find the concentration of a solution of barium hydroxide.
Barium hydroxide solution is an alkali.
The chemist could find the concentration of the barium hydroxide solution using two different methods.
Method 1
• An excess of sodium sulfate solution is added to 25 cm3 of the barium hydroxide solution. A precipitate of barium sulfate is formed.
• The precipitate of barium sulfate is filtered, dried and weighed.
• The concentration of the barium hydroxide solution is calculated from the mass of
barium sulfate produced.
Method 2
• 25 cm3 of the barium hydroxide solution is titrated with hydrochloric acid of known concentration.
• The concentration of the barium hydroxide solution is calculated from the result of the titration.
Compare the advantages and disadvantages of the two methods. -5
Method 1: gravimetry
advantages: Impurities in the sample can be identified
disadvantages: The process is long, because it goes through several stages
Method 2: titration
advantages: the process is fast, because the titrate and titrant react immediately
disadvantages: Sometimes the determination of the end point of the titration is carried out too fast or too slowly so that the calculations carried out are inaccurate
1. How many mL of copper (II) sulfate of a 2.5M stock solution is needed to make 250 mL of 0.2M solution?
Answer:
20ml
Explanation:
using the formula;C1V1=C2V2
2.5×V1=0.2×250
2.5V1= 50
V1=50/2.5
V1=20L
if all of the finches started on one island, how would speciation (creation of new species) occur on the different island
Answer:
They would be different.
Explanation:
As the finches evolved and moved away from their primary island, they would differentiate and change their species slightly. Maybe color of=r beak shape.
GUYS HELP PLEASE!
Do you think that the 24-hour wind pattern along the coastline of Hawaii would occur in other places? If so, where? Construct an argument to explain your reasoning.
Answer:
The answer is yes! The Wind Pattern also known as trade winds. It can occur in other places near 30 Degrees to the north and south. for example In the east side Europe, Turkey, and Africa can all have trade winds And in north Algeria, Libya, Egypt, and Israel can also have trade winds.
I hope this helps!! :D
An ion has 56 protons, 54 electrons, and 81 neutrons. What is the
element's symbol?
Explanation:
The barium – 137 cation would have 56 protons, 54 electrons and 81 neutrons.
Why do you see a flash of lightning before you hear the thunder during a storm?
Answer:
the speed of light travels much faster than the speed of sound.
what does it mean when a dynamic equilibruim has been reached
Answer:
Dynamic equilibrium only occurs in reversible reactions, and it’s when the rate of the forward reaction is equal to the rate of the reverse reaction.
Explanation:
Does this answer your question?
A feather gently floats on a pool. Which of the following statements best explains why the feather stays on top of the water?
Answer:
The water molecules are held tightly together by hydrogen bonding.
Explanation:
This bond gives surface tension to the water, therefore causing the feather to float.
This symbol is often used to indicate that heat was applied to aid in the reaction
If an atom has five protons, five neutrons, and five electrons, what is the overall charge of the atom?
Answer:
neutral
Explanation:
cause the all balance out
A compound is 52.0% zinc 9.6% carbon and 38.4% oxygen. Calculate the empirical formula of the compound.
Answer:
So a compound is 52% Zinc(Zn), 9.6% Carbon(C), and 38.4% Oxygen (O). Let’s first start off by assuming that we have 100 g of this compound. This means that we have 52 g of Zinc, 9.6 g of Carbon, and 38.4 g of Oxygen.Zinc = 65.38 g/molCarbon = 12 g/molOxygen = 16 g/molThis means we have:52 g of Zn(1 mol Zn/65.38 g of Zn) ≈0.8 mol of Zn.9.6 g of C(1 mol C/12 g of C) = 0.8 mol of C38.4 g of O(1 mol of O/16 g of O) = 2.4 mol of O.
Explanation:
What we want to do next is divide each element by the common factor of all of them, which is 0.8. In most cases, you divide each element by the element with the least amount of moles. After we divide each by 0.8, you’ll notice you have 1 Zn, 1 C, and 3 O. This gives you the empirical formula of ZnCO3, or Zinc Carbonate.
Someone pls help me. I will mark you brainliest.
Answer:
Lighter-colored objects emit more light, and darker colored objects absorb more light. The more light an object absorbs, the more it heats up when it is exposed to light, which is why dark things get hot more quickly than light things if left out in the sun
Explanation:
36. (Higher) 2Mg + O2 → 2Mgo. Limiting reactant is Mg (4 mol). What is the amount of
product (in mol)? PLEASE HELP ME HOW TO WORK THESE OUT!!
Answer:
4 mol MgO
Explanation:
convert the limiting reactant to product by using dimensional analysis in order to see how many moles total can be created of the product
4 mol Mg x [tex]\frac{2 mol MgO}{2 mol Mg}[/tex] = 4 mol MgO
PLEASE HELP ASAP
Gay-Lussac was a scientist who discovered the relationship between pressure and temperature of gases. what kind of relationship did he discover?
A. direct
B. intentional
C. indirect
D. chemical
Answer:
I think its D.!!
Explanation: