atmospheric pressure is measured in all of the following units except ……… ? A. torr B. pascal C. bar D. newton?

Answers

Answer 1

Answer:

C. Bar

Explanation:


Related Questions

Which object will have the greatest gravitational pull?.

Answers

Answer: Since you haven't provided any answer choices, the answer would be the object with the greatest mass, like the earth vs the sun. The sun is obviously way bigger therefore has more graviational pull.

Hope this helps!

A car is traveling with a velocity of 40. 0 m/s and has a mass of 1120 kg. How much kinetic energy does the car have?

Answers

Answer:

896 kj

Explanation:

KE= 1/2 mv^2 = 1/2  1120  40^2 =  

the voltage used by most households can be modeled by a sine function. The maximum voltge is 120 volts, and there are 60 cycles every second. Write an equation to represent the value of the voltage as it flows through the electric wires, where t is time in seconds

Answers

The required equation for the sine function can be written as; V = 120sin120πt

What is a sine function?

A sine function is a regular repeating function. We know that the voltage is represented using a sine function of the general form V= V-o sin2πft

Hence;

f = 60 cycles per second

V-o = 120 volts

So from the values that we have stated above;

V = 120sin120πt

Learn more about voltage: https://brainly.com/question/13521443

How many atoms are there in 0,23 g Na?

Answers

Answer:

There are 6.02*10^23 atoms in each mole (Avagadro no.) That is x moles * avagadro no. According to that, in 23 grams of sodium we have 6.02*10^23 atoms of Na.

Explanation:

How do you calculate the average power, current, potential difference of an AC generator

Answers

The average ac power is found by multiplying the rms values of current and voltage

A beaker of (liquid) water has been heated to its boiling point.
Calculate the mass of water which will evaporate when an additional
565 kJ of energy is transferred to the water. The specific latent heat
of vaporisation of water is 2.26 MJ/kg (2,260,000 J/kg).

Answers

Latent heat can not be detected by a thermometer. The mass of water lost is 0.25 g.

What  is latent heat?

The latent heat is the heat that can not be detected by a thermometer but it acts to break the intermolecular bonds in a substance.

Now we know that;

Heat added = 565 * 10^3 J

Heat of vaporization of water = 2,260,000 J/kg

H = mL

m = H/L

m = 565 * 10^3 J/ 2,260,000 J/kg

m = 0.25 g

Learn more about latent heat: https://brainly.com/question/13428994



We see a bolt of lightning and 4 s later we hear the thunderclap. If the speed of
sound in air is 0.2 mi/s, how far away is the lightning?

Answers

Answer:

i guess 0.8 miles away

Explanation:

mathematically:-

speed is given in question

Time is given

and we have to find distance

simply by using speed formula (s) = d/t

we get answer

The bolt of  lightning is  0.8 miles far away.

What is speed?

The speed of any moving object is the ratio of the distance covered and the time taken to cover that distance.

Given, is a bolt of lightning and 4 s later we hear the thunderclap. If the speed of sound in air is 0.2 mi/s,

Speed = d/t

D = 0.2 x 4

D = 0.8 miles

Thus, the lightning is  0.8 miles far away.

Learn more about speed.

brainly.com/question/7359669

#SPJ2

A resistor of 4 ohms is connected isn series to a box speaker of unknown resistance. If a current of 0. 6A flows through the speaker when a voltage of 12V is applied across the combination, calculate: 1. The total resistance in the circuit. Ii. The resistance of the speaker ili. The voltage applied across the speaker. ​

Answers

Answer:

Explanation:

Part One

Current = 0.6 amps

Voltage = 12 volts

R = ?

R = E / I

R = 12/0.6

R = 20 ohms

Part 2

Rt = Rspeaker + R

Rt = 20 ohms

R = 4 ohms

Formula

Rt = Rspeaker + R

20 = Rspeaker + 4          Subtract 4 from both sides

Rspeaker = 16 ohms

Part 3

Rspeaker = 16 ohms

I = 0.6 ohms

E = 0.6 * 16

E = 9.6

Which body in our solar system is larger than earth.

Answers

Answer:

The Neptune

Explanation: Hope it helps you :))))

Have a good day

One car of mass 1,765 kg is travelling at a speed of 28 m/s. This car runs into another car that is at rest and they stick together. The resulting wreck is moving at a speed of 10 m/s. What is the mass of the car that was originally at rest?

Answers

Answer:

3177 kg

Explanation:

Conservation of momentum

momentum = mv     this will be the same before and after the wreck

1765 * 28 = 49420  kg - m/s

After, it will be the same

(1765 + m2) 10 = 49420

m2 = 3177 kg

How does the seasonal change of hibernation help some animals in Florida?

Answers

The animal can develop swiftly when hibernating. Hibernation allows the animal to produce a large number of progeny. When food is sparse, the animal goes into hibernation.

Answer:

Hibernation allows the animal to survive when food is scarce.

Explanation:

in spring they need food to survive

If we could see our own galaxy from 2 million light-years away, it would appear _________.

Answers

Answer:

It would appear as a flattened disk with a central bulge and spiral arms, spanning a few degrees across the sky.

Explanation:


I hope this helps! Have a great day!

Anygays-

A student examining a flashlight observes that it uses a traditional incandescent light bulb. The power rating of the bulb is 60 W, and the bulb is connected to 36 V. What is the current moving through the bulb?

Answers

The current moving through the traditional incandescent light bulb in the examined flashlight is 1.67A.

Electric Power

Electric power is simply the rate at which electrical energy is transferred by an electric circuit per unit time. It is equal to the voltage difference across the element multiplied by the current.

It can be expressed as;

P = V × I

Given the data in the question;

Power = 60WVotage V = 36VCurrent I = ?

To determine the current moving through the bulb, we substitute our given values into the expression above.

P = V × I

60W = 36V × I

I = 60W / 36V

I = 1.67A

Therefore, the current moving through the light bulb is 1.67A.

Learn more about electric power here: https://brainly.com/question/19339003

This country has become an attractive manufacturing location for semiconductors because of the number of manufacturing plants in the country and availability of workers skilled in semiconductor production.

Answers

This country has become an attractive manufacturing location because of availability of workers skilled in semiconductor production is True.

What is Production?

This involves the process of conversion of raw materials into finished products.

It involves the factors of production which is why the country became an attractive manufacturing location for semiconductors because of the number of manufacturing plants in the country and availability of workers skilled in semiconductor production.

Read more about Production here https://brainly.com/question/16755022

A point charge of +3.0 × 10–6 C experiences a force of
2.5 N. What is the electric field strength at the
location of the point charge?

Answers

Answer:

How far from a point charge of +2.4x 10-6C must a test charge be placed to measure a field of 360 N/C? E-AV = 400 V = 2X104 N/C d =( 0.020 m 7.)

Explanation:

How can you make the work output of machine greater than the work input

Answers

Answer:

The only way to increase the work output is to increase the work input. You can't get more work out of a machine than you put into it. The moving parts of a machine must use some of the work input to overcome friction. Because of friction, the work output of a machine is always less than the work input.

Explanation:

If you were an astronaut floating in outer space and you threw a baseball, how much force would be required to keep that baseball moving at a constant speed after you let go of it?

Answers

Answer:

None     Zero

Explanation:

No more force applied after you release it <==== inertia means it will keep on moving in the same direction

A softball traveling at 34 m/s has a kinetic energy of 98 J.

Calculate its mass.

calculate the height of the ball.

Calculate the power if ball stays in air for 1 mins

will give brainliestttt

Answers

Answer:

The mass=0.169

The height=57.8

The power=1.63 watts

Explanation:

The formula for mass is 2KE/v^2

v=34×34 KE=98 therefore 2*98/34^2=0.169

The formula for height is v^2/2g

v=34*34 therefore 34^2/2*10=57.8

The formula for power is work/time

in which the work is the kinetic energy =98

and time 1*60secs =60 therefore 98/60=1.63watts

In order for a ball to move upward, the initial velocity of the ball must be greater than _____.

Answers

Answer:

The answer is zero please Give me Brainly

Explanation:

A negatively charged rubber rod was brought near some small pieces of paper. The rod’s charges repelled the
negative charges in the pieces. Which of the following caused the repulsion of the negative charges?
a. conduction b. insulation c. induction d. friction

____ 12. The diagram below shows two aluminum spheres.

Aluminum sphere A contains a small negative charge and is touched by aluminum sphere B, which has a
larger negative charge. Which of the following occurs next?
a. Protons flow from sphere B to sphere A.
b. Protons flow from sphere A to sphere B.
c. Electrons flow from sphere B to sphere A.
d. Electrons flow from sphere A to sphere B.

____ 13. Most electrical wires are covered with plastic or rubber. The wires are covered with plastic or rubber because

those materials
a. are conductors of electricity. c. are not conductors of electricity.
b. make complete electric circuits. d. make the electricity move quickly.

____ 14. The loss of static electricity as electric charges transfer from one object to another is called

a. friction. b. conduction. c. induction. d. static discharge.

Answers

c. Electrons flow from sphere B to sphere

___ 13. Most electrical wires are covered with plastic or rubber. The wires are covered with plastic or rubber because

those materials

a. are conductors of electricity. c. are not conductors of electricity.

b. make complete electric circuits. d. make the electricity move quickly.

____ 14. The loss of static electricity as electric charges transfer from one object to another is called

a. friction. b. conduction. c. induction. d. static discharge.

The strength of the electric field 0.5 m from a 6 µc charge is n/c. (use k = 8.99 × 109 n•meters squared per coulomb squared and round answer to the nearest whole number.)

Answers

The strength of the electric field will be 215760 NC⁻¹. The concept of the electric field strength is used in the problem.

What is electric file strength?

The electric field strength is defined as the ratio of electric force and charge. Its unit is NC⁻¹.

The given data in the problem is;

E is the Electric Field Strength

k is the Colomb's constant = 8.99 x 10⁹ N.m²/C²

q is the magnitude of charge = 6 μC = 6 x 10⁻⁶ C

r is the distance = 0.5 m

The electric field strength is given by the formula;

[tex]\rm E = \frac{Kq}{R^2} \\\\ \rm E = \frac{8 .99 \times 10^9 6 \times 10^6 }{(0.5)^2} \\\\ E=215760 \ NC^{-1}[/tex]

Hence the strength of the electric field will be 215760 NC⁻¹.

To learn more about the electric field strength refer to the link;

https://brainly.com/question/4264413

The speed at which data travels to and from the ISP is measured in ______. Select your answer, then click Done.

Answers

The speed at which data travels to and from the ISP is measured in bps. The speed of the data travel is measured in beats per second.

What is speed?

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.

The formula for the speed of data travel is found as;

[tex]\rm v = \frac{Data \ travelled}{time}\\\\[/tex]

The unit for the speed of data traveled is beats /sec. The speed at which data travels to and from the ISP is measured in bps.

Hence the bps is the correct answer for the blank.

To learn more about the speed refer to the link;

https://brainly.com/question/7359669

#SPJ1

An experiment was set up to investigate the cooling of water in two flasks. One flasks was painted shiny white. The other was painted Matt black. The starting temperature of the hot water poured into both flasks was 80 degrees. Explain what other quantity had to be kept the same in both flasks to make the experiment fair.

Answers

Answer:

add add more hot water in the flask painted shiny white while less of it in the one painted Matt black

Explanation:

Let's name the flasks A and B respectively

flask A due to the nature of its exterior will tend to reflect heat from the environment thus will need more hot water while flask B since it painted in Matt black the heat will be absorbed from the environment thus will require less hot water

A tennis player can serve a tennis ball at approximately 2.0 m/s.
If the other player is 4.0 meters away from the server, how long
does it take the ball to reach the second player? Please show
your work in order to earn credit for this question.
Kinematic Equation which may help with this problem.

Answers

Distance, Velocity and Time

Formula: [tex]d=vt[/tex]

d = distancev = velocityt = time

Solving the Question

We're given:

v = 2.0 m/sd = 4.0 mSolve for t

[tex]d=vt\\\\t=\dfrac{d}{v}[/tex]

⇒ Plug in the given values:

[tex]t=\dfrac{4.0}{2.0}\\\\t=2.0[/tex]

Answer

Therefore, it took 2.0 seconds for the ball to reach the second player.

Another student group collects the following data. They predict that the starting position
of the cart does not have an effect on the acceleration (they have a constant
relationship). Complete their data table, analyze their data and write a conclusion

Answers

Answer:

Accelaration: 2 - 1.875 - 2.167 - 2.25

Explanation:

Acceleration is [tex]\frac{ Ending Velocity-Starting Velocity }{Ending time-Starting time}[/tex]

Acceleration to Time graph and the conclusion would be the description of that slope

According to NEC 110.9, switches and fuses must have a(n) ____ capacity not less than the available short-circuit current at their supply terminals.

Answers

According to NEC 110.9, switches and fuses must have Interrupting capacity not less than the available short-circuit current at their supply terminals.

What is interrupting Capacity?

Interrupting Capacity is the fault conditions current that a circuit breaker may stop without causing the circuit breaker to fail.

According to NEC 110.9, switches and fuses must have Interrupting capacity not less than the available short-circuit current at their supply terminals.

Hence the correct answer for the blanks is Interrupting .

To learn more about the interrupting Capacity refer to the link;

https://brainly.com/question/14288886

#SPJ1

According to current understanding, what is a quasar?.

Answers

Answer:

A quasar is an extremely bright, distant object visible to radio telescopes.

Which has the greatest atomic mass?
Sulfur (S), Silicon (Si). Bromine (Br). Phosphorus (P)

Answers

Answer:

Bromine

Explanation:

Bromine has an atomic mass of 79.904 which is greater than all the other ones.

If you pull on a box with a force of 5 N and your teacher pulls on the same box with a force of 5 N in the opposite direction, the net force on the box is _______. View Available Hint(s)for Part A 0 N 5 N 50 N 10 N

Answers

Answer:

A. 0N

Explanation:

assume you're pulling in the positive direction, then we have 5 + (-5) = netforce = 0N

A combination burglary/fire alarm system listed for household use may be used in a small mercantile occupancy.
A. True
B. False

Answers

The same combination burglary/fire alarm system listed for household use can not be used in a small mercantile occupancy hence the statement is false.

What is a small mercantile occupancy?

A small mercantile occupancy refers to an area that is used for the display of certain goods. It is in short a mini commercial space.

We can not use the same combination burglary/fire alarm system listed for household in a small mercantile occupancy hence the statement is false.

Learn more about small mercantile occupancy:https://brainly.com/question/17866538?

Other Questions
A negative charge of -6.0x10-6 C exerts anattractive force of 65 N on a second charge that is0.050 m away. What is the magnitude of the secondcharge? please help me with thisthank you! Which is the best sentence to revise to replace vague language? sentence 1 sentence 2 sentence 3 sentence 4 The most basic level of maslow's hierarchy of needs are __________ needs. a. physical b. social c. self-actualization d. esteem please select the best answer from the choices provided. a b c d The sun is a mass of ________ particles and _______ fields ILL GIVE BRAINLIST What was life like in the Eastern and Western worlds before the Crusades happened? Why do you think governments frequently attempt to control apartment rents but not house prices? What decimal is being represented by the decimal grid?a. 232b. 23.2c. 2.23d. 2.32 if there are 34555 apples in a truck then 300 are ate ant 200 go to trash and 999 is in room. how many left. Answer in hurry The activities that managers create to attract and retain employees and to ensure that they perform at a high level to help an organization accomplish its goals are called ______. 2x + 5y = 20 6x - 5y = 12 How might presidential behavior change if we once again allowed presidents to serve more than two terms? Be as specific as possible. Do you think term limits on the president should be maintained or removed? Why or why not? Explain your answer. How much would $600 invested at 8% interest compounded continuously be worth after 3 years. round your answer to the nearest cent. A(t) = Pe^ rt The depth of the water at the end of a pier changes periodically along with the movement of tides. on a particular day, low tides occur at 12:00 a.m. and 3:30 p.m., with a depth of 3.25 meters, while high tides occur at 7:45 a.m. and 11:15 p.m., with a depth of 8.75 meters. which of the following equations models d, the depth of the water in meters, as a function of time, t, in hours? let t = 0 be 12:00 a.m. d = negative 3.75 cosine (startfraction 4 pi over 31 endfraction t) 5 d = negative 3.75 cosine (startfraction 4 pi over 29 endfraction t) 5 d = negative 2.75 cosine (startfraction 4 pi over 31 endfraction t) 6 d = negative 2.75 cosine (startfraction 4 pi over 29 endfraction t) 6 Lamar got a 75, 89, 94, 95, 88, 96, 94, 82, 98, and 96 on his science tests last quarter. What is the mean absolute deviation of the data? Round to the nearest tenth.(please reply in a few hours at max) 25 Points!!!!!Which of the following is the best example of a public service job that may not pay well in terms of money but is beneficial in many other ways?A. Peach corps workerB. college professorC. computer scientist What is atom?What is mass? After 1949, Poland, Hungary and Yugoslavia would have been considered part of what What is the percent of increase from 6 to 9? Developmentally appropriate toys for 3-5 year olds.