Answer with the Matching-match the letter with the correct item

Igneous: Basalt ,Granite ,Obsidian ,Pumice, Andesite

Sedimentary: Limestone ,Sandstone, hale ,Conglomerate ,Gypsum

Metamorphic: Marble ,Slate, Schist, Gneiss ,Quartzite

Rock is a naturally occurring mineral aggregate that is cohesive and composed of one or more minerals.

These aggregates often take the shape of recognisable and mappable volumes and are the fundamental building block of the solid Earth.

According to the processes that led to the development of a rock, it is typical to classify rocks into three major categories.

There are three main types of rocks: igneous rocks, which are made of molten rock known as magma; sedimentary rocks,

which are made up of rock fragments or materials that have precipitated from solutions; and metamorphic rocks,

which are formed from either igneous or sedimentary rocks and have undergone conditions that have changed their mineralogical composition, texture, and internal structure.

Igneous: Basalt ,Granite ,Obsidian ,Pumice, Andesite

Sedimentary: Limestone ,Sandstone,hale ,Conglomerate ,Gypsum

Metamorphic: Marble ,Slate,Schist, Gneiss ,Quartzite

To know more about rock visit:

https://brainly.com/question/19930528

#SPJ9

assuming question - Group the labels according to the type of rock they describe. Igneous, sedimentary, and metamorphic.

The Arrhenius equation shows that the activation energy is directly proportional to the logarithm of the rate constant and inversely proportional to the temperature.

The Arrhenius equation is

[tex]k = A e^{-\frac{E_a}{RT}}[/tex]

where:

k is the rate constant is the pre-exponential factor

Ea is the activation energy

R is the gas constant

T is the temperature in Kelvin

According to the Arrhenius equation, as temperature increases, the rate constant, and thus the reaction rate increases exponentially. This is because as temperature increases, the average kinetic energy of the molecules in the reaction mixture increases, leading to a greater proportion of molecules with sufficient energy to react.

The activation energy of a reaction, Ea, is the minimum energy required for reactant molecules to react and form products. The Arrhenius equation shows that the activation energy is inversely proportional to the rate constant, and thus the reaction rate. As temperature increases, the proportion of reactant molecules with sufficient energy to overcome the activation energy barrier increases, reducing the activation energy and increasing the reaction rate.

Overall, the Arrhenius equation demonstrates that increasing temperature increases the reaction rate and decreases the activation energy.

To learn more about activation energy refer - brainly.com/question/14776335

#SPJ11

If a solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in the sample.

Good conductors are the materials which offer very low resistance to the flow of electric current.

Solid copper is a metal, and metals have metallic bonds. Metallic bonds are a type of chemical bond that occur between atoms of metallic elements. In a metallic bond, valence electrons of the metal atoms are delocalized and shared among all the atoms in metallic solid, creating "sea" of electrons that are free to move throughout the structure.

This gives metals their unique properties such as high electrical conductivity and ductility. So, if solid sample of copper is an excellent conductor of electric current, it is likely due to the presence of metallic bonds in sample.

To know more about conductor, refer

https://brainly.com/question/492289

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: A solid sample of copper is an excellent conductor of electric current . Which type of chemical bonds are in the sample?

The pH value of the resulting solution assume the volume of the solution is not affected by this addition is 3.283.

The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.

In this Question, HF is a Weak Acid and RbF is a weak Base - HNO3  is a strong acid.

HF reaction in aqueous medium

HF +  H2O  --------- H3O+  + F -  

RbF +  H2O  ----  Rb+ +  F -

pH (Original)  =  pKa  +  log ( [salt ] / [Acid] )  

We donot need to calculate pH original -which is for the original solution before adding the strong acid.

HF is a weak acid - so in a buffer solution its dissociation is negligible - so it does not affect the H+  ion concentration much.

When a 0.012 mol of HNO3  is added to the buffer solution , it dissociates in H+ and NO-3  .

H+ ions dissociated from the Acid react with F -  and produce HF . As a result the acid concentration will increase to the extent of 0.012 mol  and the salt concentration reduces by the same extent - 0.012 mol.

So the formula for New pH changes to

pH (New)  =  pKa  +  log ( [salt ] - 0.012 mol / [Acid] + 0.012 mol)

Here , 0.012 mol are added to 281 mL solution,

Concentration of HNO3,  M = number of moles / Vol in litres  

                                            =  0.012 mol / 281 mL

                                            =  0.012 mol / 281  / 1000

                                           = [0.012 mol x 1000]  / 281 L  =  0.043 M

As pKa = -log(Ka)  ,  

Given  [salt ] =  0.480 M ,  [Acid] =  0.318 M

                   = - log(Ka) +  log [ (0.480 M - 0.043 M) / (0.318 M + 0.043 M) ]

                        =  - log (6.31 x 10-4 )   +  log ( 0.437 / 0.361)

      pH (New)    =  3.20 + 0.083  = 3.283.

Learn more about pH value:

https://brainly.com/question/10603602

#SPJ4

Complete question:

A biochemist wanted to adjust the pH of 281 mL of a buffer solution composed of 0.318 M HF and 0.480 M RbF (K, = 6.31e - 04) by adding 0.012 moles of HNO3. Determine the pH of the resulting solution: pH number (rtol=0.02, atol=1e-08)

The normal ratio of bicarbonate to dissolved CO2 in arterial blood is: 20:1

This means that, for every molecule of dissolved CO2 in arterial blood, there are 20 molecules of bicarbonate. This ratio is important for the maintenance of proper blood acidity and helps ensure that the body's systems function properly.

Bicarbonate helps to regulate the pH balance in the blood and helps to keep it within the range that is necessary for the proper functioning of the body's systems. Bicarbonate is produced by the kidneys and helps to maintain the blood's acid-base balance by controlling the amount of CO2 in the blood.

As CO2 enters the blood, it combines with the bicarbonate, and this helps to maintain the proper balance of acidity in the blood. The body uses bicarbonate to neutralize acids that enter the blood through the digestive system, which helps to maintain the proper pH balance in the blood.

Bicarbonate also helps to reduce the amount of lactic acid in the blood, which can build up after exercise. The body also uses bicarbonate to help excrete excess carbon dioxide in the urine, which is produced when the body breaks down food. The normal ratio of bicarbonate to dissolved CO2 in arterial blood helps to ensure that the body is functioning properly.

The ratio helps to regulate the acid-base balance in the blood and helps to ensure that the body's systems are able to function optimally. Without the correct ratio of bicarbonate to dissolved CO2, the body's systems would not be able to function properly.

To know more about bicarbonate refer here:

https://brainly.com/question/8560563#

#SPJ11

The theoretical yield of water formed from the reaction of 34.3 g of hydrochloric acid and 72.6 g of sodium hydroxide is 16.9 g.

The balanced chemical equation of the reaction can be written as follows:

HCl + NaOH → NaCl + H₂O

The reactants, hydrochloric acid (HCl) and sodium hydroxide (NaOH), are combined in a 1:1 mole ratio. This means that for every mole of HCl, one mole of NaOH is necessary to produce one mole of water and one mole of sodium chloride.

The molar mass of HCl and NaOH is 36.5 g/mol and 40.0 g/mol, respectively. Dividing their mass with their respective molar mass, we will have the number of moles of each reactant.

moles HCl = 34.3 g / 36.5 g/mol = 0.94 mol

moles NaOH = 72.6 g / 40.0 g/mol = 1.815 mol

Therefore, 34.3 g of HCl is equivalent to 0.94 moles, and 72.6 g of NaOH is equivalent to 1.82 moles.

Since these are in a 1:1 mole ratio, this reaction should produce 0.94 moles of water. The molar mass of water is 18.0 g/mol, and thus the theoretical yield of water produced is:

mass = moles x molar mass = 0.94 mol x 18 g/mol = 16.9 g.

Learn more about theoretical yield here: https://brainly.com/question/25996347.

#SPJ11

Answer:

See Below.

Explanation:

Europe and North America are drifting apart at a rate of about 3 cm per year due to continental drift. To find out how many years are required for them to drift 1 meter apart, we can use a simple formula:

Years = Distance / Rate

Plugging in the values, we get:

Years = 100 cm / 3 cm per year

Years = 33.33

Therefore, it would take about 33.33 years for Europe and North America to drift 1 meter apart at the current rate.

I hope this helps!

To find the number of years needed for Europe and North America to drift apart by 1.00 meter, given a drift rate of 0.438 cm per year, we convert the meter into centimeters, and then divide by the rate. The calculation gives approximately 228 years.

To determine the number of years required for the continents to drift apart by 1.00 meter, we use the concept of rate, distance and time often used in mathematics.

Given the rate of drifting is 0.438 cm per year, we first convert the 1.00 meter into centimeters as calculations should be in the same units. 1 meter equals 100 cm.

We then divide the total distance by the rate of drift to find the time. So, 100 cm/0.438 cm per year gives approximately 228 years.

Therefore, it would take approximately 228 years for Europe and North America to drift 1.00 meter apart at the current rate.

https://brainly.com/question/16549128

#SPJ2

The type of geometry that acetone (CH2O), in which three bonding pairs of electrons are arrayed around the central atom, have is trigonal planar.

The molecular geometry of acetone is a trigonal planar. In acetone, there are three bonding pairs of electrons that are arranged around the central atom, which gives the molecule a trigonal planar shape.

Bonding pairs of electrons in acetone. The central atom in acetone is carbon.

The carbon atom forms two double bonds with the two oxygen atoms, and there is a single bond between carbon and the hydrogen atom.

Trigonal planar is a molecular geometry model that indicates the shape of a molecule where the central atom is located at the center and has three atoms surrounding it at an angle of 120 degrees. The trigonal planar is a shape that is possible for molecules with a central atom that has three bonds and no lone pairs.

Learn more about Trigonal planar here:

https://brainly.com/question/17110157#

#SPJ11

The one low-tech method that is currently available to actively remove [tex]CO_2[/tex] from the air is afforestation.

Afforestation is the process of establishing a forest or stand of trees in an area where there was no forest. It is a type of forestation that involves planting trees in an area where there was no forest before. The process includes selecting an area, planting tree saplings, and nurturing them to maturity, allowing for effective CO2 removal over time.

The practice of afforestation has been used as a tool to combat climate change and mitigate the effects of global warming. The trees absorb [tex]CO_2[/tex] from the atmosphere and release oxygen through photosynthesis.

Therefore, afforestation is an effective way to remove [tex]CO_2[/tex] from the atmosphere.

To learn more about afforestation refer: https://brainly.com/question/6693804

#SPJ11

To determine the volume of NaOH used to reach the equivalence point of the titration using the titration data, we need to find the point where the acid and base are neutralized.

At this point, the moles of acid and base are equal, and this is called the equivalence point.To find the volume of NaOH used at the equivalence point, we can use the following

Steps:1. Plot the titration data on a graph of pH versus volume of NaOH added.

Steps:2. Identify the point where the pH changes abruptly. This is the equivalence point.

Steps:3. Determine the volume of NaOH added at the equivalence point by reading the volume from the graph.

Steps:4. Compare the volume of NaOH used at the equivalence point of the titration with the predicted volume calculated above.The extent of agreement with the predicted volume can be assessed by calculating the percent error.

The percent error is calculated using the formula:

                                      Percent error = [(experimental value - theoretical value) / theoretical value] x 100

If the percent error is small, then the agreement is good. If the percent error is large, then there is a significant difference between the predicted and experimental values.

Learn more about equivalence point of the titration here, https://brainly.com/question/31181892

#SPJ11

0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition

The balanced chemical equation for the decomposition of hydrogen peroxide (H2O2) is:

2 H2O2 → 2 H2O + O2

This means that for every 2 moles of hydrogen peroxide, 1 mole of oxygen gas is produced. So to calculate the number of moles of O2 produced when 1.62 moles of H2O2 decompose, we need to use a proportion:

2 mol H2O2 : 1 mol O2 = 1.62 mol H2O2 : x mol O2

where "x" is the number of moles of O2 produced.

To solve for "x", we can cross-multiply and simplify:

2 mol H2O2 * x mol O2 = 1 mol O2 * 1.62 mol H2O2

2x = 1.62

x = 0.81

Therefore, 0.81 moles of O2 would be produced if 1.62 moles of H2O2 were to undergo decomposition.

To know more about moles click here:

brainly.com/question/26416088

#SPJ4

Elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.

The melting point and boiling point of elements are both important indicators of an element’s chemical and physical properties.

Elements in the same group of the periodic table typically share similar melting and boiling points due to their similar chemical properties.

The melting point of an element is the temperature at which the solid phase of the element turns into a liquid. Similarly, the boiling point is the temperature at which the liquid phase of the element turns into a gas.

The melting and boiling points of elements in the same group tend to be very close, which indicates that the elements have similar physical and chemical properties.

This is because elements in the same group share similar chemical structures and electron configurations, which makes them react similarly to changes in temperature.

By understanding the melting and boiling points of elements in a group, scientists can more accurately predict the properties of the element in different phases of matter.

to know more about elements refer here:

https://brainly.com/question/24407115#

#SPJ11

Monitoring the temperature of the oil prior to adding the potassium methoxide solution is essential for predicting and controlling the reaction rate, as well as ensuring the safety of the process.

The temperature should be monitored with an accurate thermometer and recorded periodically to make sure it is not rising or falling significantly.

Calibrating the thermometer regularly is also important for obtaining accurate readings.

It is important to monitor the temperature of the oil prior to adding the potassium methoxide solution for several reasons.

Firstly, the addition of potassium methoxide into oil can cause a rapid exothermic reaction, which is the release of energy in the form of heat.

The rate of this reaction is largely dependent on temperature, so having accurate temperature readings is important for predicting and controlling the reaction.

Additionally, overheating can cause the potassium methoxide to decompose, which can lead to undesired products and potentially hazardous conditions.

Therefore, monitoring temperature is critical in ensuring the safety of the reaction.

In order to monitor temperature accurately, it is important to have an appropriate thermometer and have a general understanding of the expected temperature range for the reaction.

The thermometer should be inserted into the oil to a predetermined depth and left there for a predetermined period of time in order to get an accurate reading.

The temperature should be recorded periodically to make sure it is not rising or falling significantly. Additionally, the thermometer should be calibrated regularly to ensure that it is providing accurate readings.

to know more about potassium methoxide refer here:

https://brainly.com/question/29442421#

#SPJ11

To compare the 0.5 M sucrose solution and the 90.5 M glucose solution, we need to consider their concentrations, which are measured in moles per liter (M).

For the 0.5 M sucrose solution, we know that it contains 0.5 moles of sucrose per liter of solution. The molecular mass of sucrose is 342 g/mol, so we can calculate the mass of sucrose in one liter of solution as follows:

0.5 moles/L × 342 g/mol = 171 g/L

Therefore, the 0.5 M sucrose solution contains 171 g of sucrose per liter of solution.

For the 90.5 M glucose solution, we know that it contains 90.5 moles of glucose per liter of solution. The molecular mass of glucose is 180 g/mol, so we can calculate the mass of glucose in one liter of solution as follows:

90.5 moles/L × 180 g/mol = 16,290 g/L

Therefore, the 90.5 M glucose solution contains 16,290 g of glucose per liter of solution.

From these calculations, we can see that the 90.5 M glucose solution is much more concentrated than the 0.5 M sucrose solution. However, the two solutions cannot be directly compared in terms of their effects on biological systems or their properties, as the properties of a solution depend on many factors such as solubility, osmotic pressure, and chemical interactions with other molecules.

To know more about molecular mass here

https://brainly.com/question/3182776

#SPJ4

One mole of fluorine gas contains 1.204 x 10^24 diatomic molecules of fluorine. Where each molecule consists of two fluorine atoms bonded together.

One mole of any substance contains Avogadro's number of particles, which is around equivalent to 6.02 x 10^23 particles. On account of fluorine gas, every particle of fluorine gas comprises of two fluorine iotas reinforced together to shape a diatomic particle. Thusly, one mole of fluorine gas would contain Avogadro's number of diatomic atoms, which is equivalent to twice Avogadro's number. Hence, there would be 2 x 6.02 x 10^23 or 1.204 x 10^24 particles of fluorine in one mole of fluorine gas. This is an essential idea in science and is utilized to change over between the quantity of particles and how much substance in a given example.

To learn more about diatomic molecules of fluorine, refer:

https://brainly.com/question/20350141

The overall reaction of zinc metal reacting with copper ions in aqueous solution is Zn (s) + Cu2+ (aq) → Zn2+ (aq) + Cu (s). The standard cell potential (E°cell) for this reaction is +1.10 V.

The overall reaction of zinc metal reacting with copper ions in aqueous solution is as follows: Zn(s) + Cu2+(aq) → Zn2+(aq) + Cu (s). The redox reaction can be written as: Zn(s) → Zn2+(aq) + 2e- (oxidation reaction) Cu2 + (aq) + 2e- → Cu(s) (reduction reaction).

The standard reduction potential (E°) values for Zn2+/Zn and Cu2+/Cu are -0.76 V and +0.34 V, respectively.

The standard cell potential (E°cell) can be calculated using the formula:

E°cell = E°reduction (reduction half-reaction) - E°oxidation (oxidation half-reaction)

E°cell = E°Cu2+/Cu - E°Zn2+/Zn

E°cell = (+0.34 V) - (-0.76 V)

E°cell = +1.10 V

Therefore, the standard cell potential (E°cell) for the reaction is +1.10 V.

For more questions related to standard cell potential.

https://brainly.com/question/29653954

#SPJ11

Therefore, a reaction would be exothermic if the sum of a enthalpies of a reactants is higher than the enthalpies of a products. A reaction is endothermic if the enthalpy on the products side is higher.

Correct option is, A.

Hence, a reaction is exothermic as well as its enthalpy will indeed be negative if it releases less energy than it takes in. See this as a certain quantity of heat evaporating from (or being removed from) the reaction. Endothermic reactions have positive enthalpies because they absorb or use more energy than they produce.

Laundry detergent powder can be quickly exothermically reacted by being dissolved in a small amount of water in your hand. Dissolving potassium chloride (offered as a salt replacement) in water in your hand is one simple endothermic reaction.

To know more about enthalpy visit:

https://brainly.com/question/13996238

#SPJ1

If 254 ml of a 2.10 m sucrose solution is diluted to 850.0 ml ,  the molarity of the diluted solution is 0.63 M.

Given:

Initial volume of sucrose solution, V1 = 254 mL

Initial molarity of sucrose solution, M1 = 2.10 M

Initial volume of diluted solution, V2 = 850 mL

To calculate Molarity of the diluted solution, M2

We can use the formula of Molarity, given as:

Molarity = (Number of moles of solute) / (Volume of solution in liters)

or

M1V1 = M2V2

Let's apply this formula in the given data:

M1V1 = M2V2(2.10 M) x (254 mL) = M2 x (850 mL)

Now, convert mL to L:

M1V1 = M2V2(2.10 M) x (0.254 L)

= M2 x (0.850 L)M2

= (2.10 M x 0.254 L) / 0.850 LM2

= 0.63 M

Therefore, the molarity of the diluted solution is 0.63 M.

For more such questions on molarity , Visit:

https://brainly.com/question/30404105

#SPJ11

Lactate and pyruvate are byproducts of anaerobic glycolysis. Anaerobic glycolysis is the metabolic process of breaking down glucose into energy when oxygen is not available.  

During anaerobic glycolysis, glucose is broken down into pyruvate in the absence of oxygen, which is then converted into lactate as a means of regenerating NAD⁺ so that glycolysis can continue. This process is commonly used by muscle cells during intense exercise when oxygen delivery cannot keep up with the energy demand. In contrast, during aerobic glycolysis, glucose is broken down into pyruvate in the presence of oxygen, which then enters the mitochondria to be further metabolized in the citric acid cycle.

Learn more about anaerobic glycolysis: https://brainly.com/question/28173469

#SPJ11

The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:

Let's understand this step-by-step:

1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:

HCl + NaOH → NaCl + H2O

This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.

Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol

moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol

The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:

mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol

The total volume of the solution is the sum of the volumes of the acid and the base:

Vtotal = Vacid + Vbase

Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L

The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:

[HCl] = mol of HCl remaining / Vtotal

[HCl] = 0.004375 mol / 0.07000 L

[HCl] = 0.0625 M

The pH of the solution can be calculated using the equation:

pH = -log[H+]

The concentration of H+ in the solution is equal to the concentration of HCl, so:

[H+] = [HCl] = 0.0625 M

Substituting this value into the pH equation:

pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.

Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076

#SPJ11

Industrial production of potassium chromate uses potassium: K2Cr2O7 + K2CO3 2 K2CrO4 + CO. Chromic hydrazine (chromium trioxide, CrO3) is transformed into red crystals after being treated with cold sulfuric acid.

It is an orange-colored substance with a potent oxidising ability. Heat will therefore cause potassium dichromate to break down into potassium chromate and release oxygen gas.

When elements interact chemically with potassium dichromate, the oxidation state of its atoms increases and they become more electronegative. Potassium dichromate is indeed a strong oxidising agent in an acidic medium.

To know more about hydrazine visit:

https://brainly.com/question/17045336

#SPJ1

The concentration of the HBr solution is 0.125 M.

The given solution is a 53.65 ml solution of HBr that is completely titrated by 33.50 ml of a 0.200 M NaOH solution.

This implies that all of the HBr present in the solution is neutralized by NaOH, and therefore, the number of moles of HBr is equal to the number of moles of NaOH.

The balanced chemical equation for the reaction:HBr(aq) + NaOH(aq) → NaBr(aq) + H2O(l)The stoichiometric ratio of HBr to NaOH in this reaction is 1:1.

This means that one mole of HBr reacts with one mole of NaOH to form one mole of NaBr and one mole of water.

We can use the given information to determine the number of moles of NaOH that were required to neutralize the HBr. The molarity of the NaOH solution is given as 0.200 M.

This means that there are 0.200 moles of NaOH in every liter of solution.

Therefore, the number of moles of NaOH used in the titration is:moles of NaOH = molarity × volume in liters= 0.200 M × (33.50/1000) L= 0.0067 mol

Since the stoichiometric ratio of HBr to NaOH is 1:1, the number of moles of HBr that were neutralized by the NaOH is also 0.0067 mol.

This means that the concentration of the HBr solution can be calculated as follows:concentration of HBr = moles of HBr / volume of HBr solution in liters= 0.0067 mol / (53.65/1000) L= 0.125 M

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

Answer:

First, we need to determine the limiting reactant in the reaction. We can do this by calculating the amount of CO2 that would be produced by each reactant and comparing them.

For C2H6:

Molar mass of C2H6 = 2(12.01 g/mol) + 6(1.01 g/mol) = 30.07 g/mol

Moles of C2H6 = 18.6 g / 30.07 g/mol = 0.619 mol

Moles of CO2 produced = 4 mol CO2 / 2 mol C2H6 * 0.619 mol C2H6 = 1.238 mol CO2

Mass of CO2 produced = 1.238 mol CO2 * 44.01 g/mol = 54.4 g

For O2:

Molar mass of O2 = 2(16.00 g/mol) = 32.00 g/mol

Moles of O2 = 69.2 g / 32.00 g/mol = 2.1625 mol

Moles of CO2 produced = 7 mol CO2 / 2 mol O2 * 2.1625 mol O2 = 7.5708 mol CO2

Mass of CO2 produced = 7.5708 mol CO2 * 44.01 g/mol = 333.5 g

Since the amount of CO2 produced by C2H6 is less than the amount produced by O2, C2H6 is the limiting reactant. Therefore, we can use the amount of C2H6 to determine the amount of H2O produced.

Moles of H2O produced = 6 mol H2O / 2 mol C2H6 * 0.619 mol C2H6 = 1.857 mol H2O

Mass of H2O produced = 1.857 mol H2O * 18.02 g/mol = 33.5 g

Therefore, 33.5 g of steam (H2O) is produced in the combustion reaction.

Mark answer as Brainliest!!

Industries that add to the buildup of hazardous gases in the atmosphere include: Transportation (cars, trucks, airplanes, ships) (cars, trucks, airplanes, ships) agricultural production, energy production (coal-fired power plants, oil refineries, and natural gas facilities), and (livestock farming, fertilizer use)

By generating energy on-site using renewables and other environmentally friendly energy sources, greenhouse gas emissions can be decreased. Rooftop solar panels, solar water heating, small-scale wind power, natural gas or renewable hydrogen-powered fuel cells, and geothermal energy are a few examples.

We must cut back on greenhouse gas emissions if we want to lessen the greenhouse effect. via increasing tree planting and reducing deforestation. Pollution and the greenhouse effect can be reduced by reducing the usage of fossil fuels.

To know more about emission visit:-

brainly.com/question/20388835

#SPJ9

The number of particles of water that exist in a closed test tube after the water vaporizes and turns into a gas will be the same as the number of particles before the phase change.

This is because during the phase change, the molecules of water simply change their state from liquid to gas.the phase change from liquid to gas does not involve any change in the number of molecules, only a change in the physical state of the molecules.  The molecules do not disappear or gain additional molecules from outside the test tube. As such, the number of particles of water in the test tube after the phase change is the same as before the phase change.

learn more about phase change Refer:brainly.com/question/30270780

#SPJ1

Pure toluene (c7h8) has a normal boiling point of 110.60oc. A solution of 7.80 g of anthracene (c14h10), in 100.0 g. toluene has a boiling point of 112.06oc. The molality of the solution is 0.438 mol/kg. and the molal boiling point elevation constant for Toluene is 3.33 °C/m.

Given that,

Molecular weight of Toluene, C7H8 = 92 g/mol

Molecular weight of Anthracene, C14H10 = 178 g/mol

Boiling point of pure Toluene, Tb° = 110.6°C

Boiling point of Toluene solution containing Anthracene, Tb = 112.06°C

We need to find the molality of the solution and the molal boiling point elevation constant for Toluene.

Molality of the solution:

Molality is defined as the number of moles of solute per kilogram of solvent.

(Here, the solvent is Toluene and the solute is Anthracene.) Number of moles of Anthracene,

n2 = Weight of Anthracene / Molecular weight of Anthracene = 7.80 g / 178 g/mol = 0.0438 moles

Number of kilograms of solvent,

w1 = Weight of Toluene / 1000 = 100.0 g / 1000 = 0.1 kg

Molality of solution, m = n2 / w1 = 0.0438 / 0.1 = 0.438 mol/kg

Therefore, the molality of the solution is 0.438 mol/kg.

Molal boiling point elevation constant for Toluene:

The elevation in the boiling point of the solvent is given by the formula:

ΔTb = Kb . m . i

where Kb is the molal boiling point elevation constant. m is the molality of the solution. i is the van't Hoff factor (which is equal to 1 for non-electrolytes like Anthracene)

ΔTb = Tb - Tb°= 112.06°C - 110.6°C = 1.46°C

We know that m = 0.438 mol/kg

Hence,1.46 = Kb . 0.438 . 1Kb = 3.33 °C/m

Therefore, the molal boiling point elevation constant for Toluene is 3.33 °C/m.

For more such questions on Toluene , Visit:

https://brainly.com/question/14041645

#SPJ11

As per the given question, the cured adhesive and UV-cured diacrylate exhibit the mesh topology. The topology of a network is the way in which the components are arranged and connected. A mesh topology, also known as a mesh network, is a network in which each device is connected to every other device in the network. This provides

redundancy and fault tolerance, ensuring that if one device fails, the network will continue to function.In the mesh topology, all nodes are connected to each other. This type of topology provides the highest level of redundancy and

fault tolerance. Each node in a mesh network is responsible for sending and receiving data to and from other nodes. This type of network is commonly used in mission-critical applications where downtime is not an option, such as in

military communications, emergency services, and stock trading networks. Thus, the mesh topology is the topology exhibited by the cured adhesive and UV-cured diacrylate networks.

For more similar questions on topic cured adhesive

brainly.com/question/28119768

#SPJ11

Entropy of the environment and the system (ethanol and oxygen being burned) both rise during the flambeating process. The second law of thermodynamics is in agreement with this increase in entropy.

When a combustion reaction takes place, the system's entropy always goes up. Combustion processes must be spontaneous because of the interaction between an increase in entropy and a decrease in energy.

A fire is exothermic, which means that it loses energy as heat is released into the surrounding space. As the bulk of a fire's byproducts are gases, such as carbon dioxide and water vapour, the system's entropy increases during the majority of combustion episodes.

To know more about thermodynamics visit:-

https://brainly.com/question/30207871

#SPJ1

The volume of stomach acid containing 0.00025 g of HCl is 6.85 µL.

This is calculated by dividing 0.00025 g by the concentration of HCl (0.10 M).

The concentration of stomach acid, HCl = 0.10 M

The mass of HCl = 0.00025 g

To find: Volume of stomach acid contains 0.00025 g of HCl.

Solution: We know,

Molarity (M) = (moles of solute) / (volume of solution in liters)

The molar mass of HCl = (1 × atomic mass of H) + (1 × atomic mass of Cl)= (1 × 1.01) + (1 × 35.5)= 36.51 g/mol

Given, Molarity (M) = 0.10 M

From the Molarity formula, we can detect

Number of moles of HCl = Molarity (M) × volume (V)

moles of HCl = 0.00025 g / 36.51 g/mol = 0.10 M × V

0.10 V = (0.00025 / 36.51) g / mol

V = (0.00025 / 36.51) g / (0.10 mol/L)

V = 6.85 × 10^-6 L = 6.85 µL

Thus, the volume of stomach acid that contains 0.00025 g of HCl is 6.85 µL.

To know more about Molarity calculations, refer here:

https://brainly.com/question/11348490#

#SPJ11

The Diels-Alder mechanism between a diene and a dienophile is concerted. Option (a) is correct.

The Diels-Alder reaction is a cycloaddition reaction in which a diene reacts with a dienophile to form a new cyclic structure.The reaction proceeds through a concerted mechanism, which means breaking of a sigma bond and the formation of a new pi bond between the diene and dienophile takes place simultaneously.

The six-membered ring formed as a result is called a cyclohexene, and the reaction is referred to as a cycloaddition reaction. The diene usually contains two alkene groups which are separated by one or more carbon-carbon double bonds.

On the other hand, the dienophile is usually an electron-deficient alkene or alkyne, it may contain electron-withdrawing groups that make it more reactive towards nucleophilic attack, or it may have pi-electrons in a non-bonding orbital which make it more susceptible to nucleophilic attack. The reaction is considered to be highly exothermic and the stereochemistry of the product formed is determined by the stereochemistry of the reactants.

If the diene and dienophile are both cis or trans, the product will be cis or trans, respectively. But, if one is cis and the other is trans, the product will be a mixture of both cis and trans.

Thus, option (a) is correct.

To know more about Diels-alder mechanism here

https://brainly.com/question/31237913

#SPJ4