An industry was planned to be constructed near a river which discharges its wastewater with a design flow of 5 mº's into the river whose discharge is 50 mº/s. The laboratory analysis suggested that ultimate BOD of wastewater is 200 mg/l and Dissolved Oxygen (DO) is 1.5 mg/1. The river water has a BOD of 3 mg/l and DO of 7 mg/l. The reaeration coefficient of the river water is 0.21 d' and BOD decay coefficient is 0.4 d'!. The river has a cross-sectional area of 200 m² and the saturated DO concentration of the river is 8 mg/l. Determine: a) Calculate the DO at a downstream point of 10 km. b) Find the location where DO is a bare minimum.

In the context of inequalities and number lines, let's analyze each statement: 1. "A number line going from 0 to 3. A closed circle is at 2. Everything to the left of the circle is shaded."

This represents the inequality t ≤ 2, where t represents a value on the number line. The closed circle at 2 indicates that 2 is included as a valid solution to the inequality.

The shading to the left of the circle represents all values less than or equal to 2, including 2 itself.

2. "A number line going from 0 to 3. An open circle is at 2. Everything to the left of the circle is shaded."

This represents the inequality t < 2, where t represents a value on the number line. The open circle at 2 indicates that 2 is not included as a valid solution to the inequality.

The shading to the left of the circle represents all values strictly less than 2.

3. "A number line going from 0 to 3. An open circle is at 2. Everything to the right of the circle is shaded."

This represents the inequality t > 2, where t represents a value on the number line. The open circle at 2 indicates that 2 is not included as a valid solution to the inequality.

The shading to the right of the circle represents all values greater than 2.

- A closed circle (filled-in circle) represents inclusion.

- An open circle represents exclusion.

- Shading to the left of the circle indicates values less than the given number.

- Shading to the right of the circle indicates values greater than the given number.

For more such questions on inequalities,click on

https://brainly.com/question/25275758

#SPJ8

Answer:

A.     3x³ - 24x

Step-by-step explanation:

-12 ÷ -4 = 3

x^4 ÷ x = x³

96 ÷ -4 = -24

x² ÷ x = x

(-12x^4 + 96x²) ÷ -4x = 3x³ - 24x

The temperature at which ΔrG° = 0.00 kJ is 1,596 K.


We know that:

ΔrG° = ΔrH° - TΔrS°

where ΔrG° is the standard free energy change of the reaction, ΔrH° is the standard enthalpy change of the reaction, ΔrS° is the standard entropy change of the reaction, and T is the temperature.

For ΔrG° to equal 0.00 kJ, we can rearrange the equation to solve for T:

T = ΔrH°/ΔrS°

Plugging in the values we have:

T = (2112 kJ)/(132.9 J/K)
T = 1,596 K

Therefore, the temperature at which ΔrG° = 0.00 kJ is 1,596 K.

Learn more about entropy here:

https://brainly.com/question/32484278

#SPJ11

a. The first step is to determine the Water Supply Fixture Unit (WSFU) for the water closet (WC) using the Uniform Plumbing Code (UPC). The UPC provides a standard value for each type of fixture based on its water demand. For a water closet, the UPC assigns a value of 8.0 WSFU.

b. Next, we can determine the WSFU for the urinal (UR). According to the UPC, a urinal has a value of 4.0 WSFU.

c. Moving on to the shower head (SHO), the UPC assigns a value of 2.0 WSFU for each shower head.

d. For lavatories (LAV), the UPC assigns a value of 1.0 WSFU per lavatory.

e. Lastly, for service sinks (SS), the UPC assigns a value of 3.0 WSFU per service sink.

f. To calculate the total fixture units of the building demand, we need to multiply the quantity of each fixture type by its corresponding WSFU value, and then sum up the results.

Here are the calculations:

WC: 130 fixtures x 8.0 WSFU = 1040.0 WSFU
UR: 30 fixtures x 4.0 WSFU = 120.0 WSFU
SHO: 12 fixtures x 2.0 WSFU = 24.0 WSFU
LAV: 100 fixtures x 1.0 WSFU = 100.0 WSFU
SS: 27 fixtures x 3.0 WSFU = 81.0 WSFU

Adding up these results, we have a total of 1365.0 WSFU for the building demand.

Therefore, the total fixture units of the building demand is 1365.0 WSFU.

To learn more about lavatory

https://brainly.com/question/14336634

#SPJ11

Answer:

64

Step-by-step explanation:

To find the number of people who liked at least one product, we need to calculate the total number of unique individuals who liked any of the three products.

We can use the principle of inclusion-exclusion to solve this problem. The principle states that:

|A ∪ B ∪ C| = |A| + |B| + |C| - |A ∩ B| - |A ∩ C| - |B ∩ C| + |A ∩ B ∩ C|

Given:

|A| = 21 (number of people who liked product A)

|B| = 26 (number of people who liked product B)

|C| = 29 (number of people who liked product C)

|A ∩ B| = 14 (number of people who liked products A and B)

|A ∩ C| = 12 (number of people who liked products A and C)

|B ∩ C| = 14 (number of people who liked products B and C)

|A ∩ B ∩ C| = 8 (number of people who liked all three products)

Using the formula, we can calculate the number of people who liked at least one product:

|A ∪ B ∪ C| = 21 + 26 + 29 - 14 - 12 - 14 + 8

= 64

Therefore, the number of people who liked at least one product is 64.

Answer:  10 sq in

Step-by-step explanation:

Area = base x height

        = 5 in x 2 in

        = 10 sq in

The RNA codons for the amino acid sequence cys tyr met pro ileu a are:UGU UAC AUG CCA AUC UAA.

The RNA codon sequence, which is UGU UAC AUG CCA AUC UAA.

The complementary sequence of DNA bases that match each of the RNA codons in order are:

UGU: ACAUAC: UGAAUG: CCAUCA: AUGUAA: UUC

The DNA code is TACATGCGGTAATAG.

The bases of the complementary strand of DNA are:

ACGTTACCATTTACA

To know more about RNA codons visit :

brainly.com/question/5824702

#SPJ11

The solar energy can be converted into usable power with the help of a Carnot machine. The heat flows from a hot source to a cold source in a Carnot engine. The maximum efficiency of a heat engine is given by the Carnot theorem.

The initial step is to convert 9.22 horsepower to watts. 9.22 horsepower x 746 = 6871.32 watts. The next step is to calculate the heat energy that is available at the collector plate. Q = (4.00 J cm-2 min-1)(60 min/hour) = 240 J cm-2 hour-1 = 240 J cm-2 3600 s-1 = 240 J cm-2 s-1. This is the maximum amount of heat energy that can be used by the engine. The temperature difference between the hot and cold reservoirs must be calculated to calculate the engine's maximum efficiency. 84°C is the temperature of the hot source, which equals 357 K. 305 K is the temperature of the cold source. The engine's maximum efficiency can be calculated using these values and the Carnot theorem. Efficiency = 1 - (305 K/357 K) = 0.146 or 14.6%.The equation can be used to determine the heat energy that the engine must remove from the collector plate per second, given the engine's maximum efficiency and the available heat energy. Q = (6871.32 watts)(0.146) = 1002.05 watts. 1002.05 J cm-2 s-1 is the amount of heat energy that must be removed from the collector plate per second to generate 9.22 horsepower of usable power. The area of the collector plate must be calculated to determine how much energy is being generated per unit area. The equation is as follows:A = Q/σT4, where Q is the heat energy per unit time and σ is the Stefan-Boltzmann constant. A = (1002.05 J cm-2 s-1)/(5.67 x 10-8 W m-2 K-4)(357 K)4. A = 92,400 cm2. The area of the collector plate must be 92,400 cm2 to generate 9.22 horsepower. The conclusion can be drawn from the above problem statement is that the collector plate's area must be 92,400 cm2 to produce 9.22 horsepower.

The equation is as follows: A = Q/σT4, where Q is the heat energy per unit time and σ is the Stefan-Boltzmann constant. A = (1002.05 J cm-2 s-1)/(5.67 x 10-8 W m-2 K-4)(357 K)4. A = 92,400 cm2. The area of the collector plate must be 92,400 cm2 to generate 9.22 horsepower.

learn more about  Carnot engine visit:

brainly.com/question/14680478

#SPJ11

The values of x and y are 30° and 120° respectively

Angles around a point describes the sum of angles that can be arranged together so that they form a full turn.

Sum of angles at a point is 360°.

Also the sum of angles on a straight line is 180°.

This means that;

x+x+y = 180

2x+y = 180

and;

x +y +30 = 180°

therefore ;

2x +y = x+y +30

2x -x = y-y +30

x = 30°

2(30) +y = 180

y = 180-60

y = 120°

Therefore the values of x and y are 30° and 120° respectively

learn more about angle at a point from

https://brainly.com/question/25716982

#SPJ1

The value of r for which y = t satisfies the given differential equation is r = -75/34.

To find the values of r for which y = t satisfies the given differential equation, we substitute y = t into the differential equation and solve for r.

Given differential equation: 12y" + 17ty + 63y = 0

Substituting y = t, we have:

[tex]12(t)" + 17t(t) + 63(t) = 0\\12t" + 17t^2 + 63t = 0[/tex]

Differentiating twice with respect to t, we get:

12 + 34t + 63 = 0

Simplifying the equation, we have:

34t + 75 = 0

Solving for t, we find:

t = -75/34

Therefore, the value of r for which y = t satisfies the given differential equation is r = -75/34.

Learn more about differential equations here:

https://brainly.com/question/31045878

#SPJ4

The routed hydrograph at Section 2 is 130 m/s, with an attenuation of 0.75 and a translation of 2 hours.

The routed hydrograph at Section 2 is obtained using the Muskingum method, which is expressed as:

where \(Q_1(t)\) and \(Q_2(t)\) are the inflow hydrographs at Sections 1 and 2, respectively. \(K\) is the Muskingum routing coefficient (given as 2 hours) and \(x\) is the weighting factor (given as 0.25). Plugging in the values, we get:

The attenuation is calculated as the ratio of the peak flows at Section 1 and Section 2, i.e. \(\frac{530}{130} = 0.75\). The translation is 2 hours, which is the time lag between Section 1 and Section 2.

The routed hydrograph at Section 3 after reservoir storage is obtained by applying the Muskingum routing again using the outflow hydrograph from Section 2 as the inflow hydrograph. Additionally, the reservoir storage characteristics are given as \(S = 204t\).

The attenuation is calculated as the ratio of the peak flows at Section 2 and Section 3, i.e. \(\frac{530}{340} = 0.64\). The translation is 4 hours, which is the time lag between Section 2 and Section 3.

Learn more about hydrograph

brainly.com/question/33436224

#SPJ11

A B+-tree initially containing the given Part-number values is subjected to deletion of specific search field values (75, 65, 43, 18, 20, 92, 59, 37). The final state of the tree after the deletions will be shown.

To illustrate the shrinking of the B+-tree after deleting the specified search field values, we start with the initial tree:

                     46,71

                     /      \

     10,15,16,21,23,24      33,37,38,39,47,48,49,50

    /       |                      |

 8         18,20                43,56,59,60,65,69

                                 |

                              74,75,78,92

Now, we will go through the deletion process:

Delete 75: The leaf node containing 75 is removed, and the corresponding entry in the parent node is updated.

                  46,71

                  /      \

  10,15,16,21,23,24      33,37,38,39,47,48,49,50

 /       |                      |

8 18,20 43,56,59,60,65,69

|

74,78,92

Delete 65: The leaf node containing 65 is removed, and the corresponding entry in the parent node is updated.

                   46,71

                  /      \

  10,15,16,21,23,24      33,37,38,39,47,48,49,50

 /       |                      |

8 18,20 43,56,59,60,69

|

74,78,92

Continue the deletion process for the remaining values (43, 18, 20, 92, 59, 37) in a similar manner.

The final state of the B+-tree after all deletions will depend on the specific rules and balancing mechanisms of the B+-tree implementation. The resulting tree will have fewer levels and fewer nodes as a result of the deletions.

Learn more about B+-tree: brainly.com/question/30075453

#SPJ11

A B+-tree initially containing the given Part-number values is subjected to deletion of specific search field values (75, 65, 43, 18, 20, 92, 59, 37). The final state of the tree after the deletions will be shown.

To illustrate the shrinking of the B+-tree after deleting the specified search field values, we start with the initial tree:

                   46,71

                    /      \

    10,15,16,21,23,24      33,37,38,39,47,48,49,50

   /       |                      |

8         18,20                43,56,59,60,65,69

                                |

                             74,75,78,92

Now, we will go through the deletion process:

Delete 75: The leaf node containing 75 is removed, and the corresponding entry in the parent node is updated.

                46,71

                 /      \

 10,15,16,21,23,24      33,37,38,39,47,48,49,50

/       |                      |

8 18,20 43,56,59,60,65,69

|

74,78,92

Delete 65: The leaf node containing 65 is removed, and the corresponding entry in the parent node is updated.

                  46,71

                 /      \

 10,15,16,21,23,24      33,37,38,39,47,48,49,50

/       |                      |

8 18,20 43,56,59,60,69

|

74,78,92

Continue the deletion process for the remaining values (43, 18, 20, 92, 59, 37) in a similar manner.

The final state of the B+-tree after all deletions will depend on the specific rules and balancing mechanisms of the B+-tree implementation. The resulting tree will have fewer levels and fewer nodes as a result of the deletions.

Learn more about B+-tree: brainly.com/question/30075453

#SPJ11

The power supplied to the motor when the efficiency is considered is 2.0 kW.

In this problem, we need to use the principle of work and energy to determine characteristics of a mass being pulled up an incline and determine the power that must be supplied to the system when the efficiency of the input system is considered.

First, we will determine the work done on the crate by the motor to pull it up an incline. We will also determine the power supplied to the motor at the instant the crate travels a distance of 4m.In the second part, we will determine the power supplied to the motor when efficiency is considered.

Part A The force parallel to the incline is given by F = ma, where a is the acceleration of the crate.

We will use the kinematic equation, v² = u² + 2as, where u = 0 (initial velocity), v = 2.5 m/s (final velocity), and s = 4.7 m (distance traveled) to calculate the acceleration.

[tex]2.5² = 0 + 2a(4.7)  ⇒ a = 2.14 m/s²[/tex]

The force parallel to the incline is given by:

[tex]F = ma = (53 kg)(2.14 m/s²) = 113.4 N[/tex]

Therefore,

To know more about principle visit:

https://brainly.com/question/4525188

#SPJ11

The combination of ground improvement theory/ technique being emphasized as the most effective in a large scale land reclamation project in view of the underlying soil profiles is vertical drains with preloading, surcharge, or vacuum consolidation.

To address this issue of a weak soil profile for land reclamation, various ground improvement techniques have been developed.

The purpose of these techniques is to improve the soil's engineering properties by increasing its strength, reducing its compressibility, and increasing its bearing capacity. The most common soil improvement methods are deep mixing, dynamic compaction, surcharge preloading, vertical drains with preloading, and vacuum consolidation.

The soil's permeability and compressibility play an important role in determining the ground improvement technique to be used.

Vertical drains with preloading, surcharge, or vacuum consolidation is the most effective ground improvement technique for this large scale land reclamation project in view of the underlying soil profiles.

The use of vertical drains with preloading is a well-established and commonly used technique for reducing the time required for surcharge consolidation and improving the efficiency of land reclamation.

The use of vacuum consolidation is also effective in improving the soil's compressibility.

To know more about permeability, visit:

https://brainly.com/question/32482559

#SPJ11

In this question, we are given the initial debt which is $10.715. We are also given the future value of the debt which is $14,094. We are also given the annual interest rate which is 3.8% and the frequency of compounding which is daily.

We need to calculate the time it will take for the debt to grow to $14,094. The formula to calculate the future value of an annuity due is:

FV = PMT × [(1 + r)n – 1] / r × (1 + r)

where FV = future value PMT = payment r = interest rate n = number of payments. Using the given data, we can write the equation as:

$14,094 = $10.715 × [(1 + 0.038/365)n × 365 – 1] / (0.038/365) × (1 + 0.038/365)

where n is the number of days it will take for the debt to grow to $14,094.If we simplify the equation, we get:

n = log(14,094 / 10.715 × 1373.66) / log(1 + 0.038/365) ≈ 189 days ≈ 0.518 years

Therefore, it will take approximately 0.5 years or 6 months for the debt of $10,715 to grow into $14,094 if the annual interest rate is 3.8% with daily compounding. To solve the above problem, we use the formula for calculating the future value of an annuity due. We are given the initial debt, future value, annual interest rate, and frequency of compounding. Using these values, we calculate the number of days it will take for the debt to grow to the future value using the formula. We get the number of days as 189 days or 0.518 years. Therefore, it will take approximately 0.5 years or 6 months for the debt of $10,715 to grow into $14,094 if the annual interest rate is 3.8% with daily compounding.

The time it will take for a debt of $10,715 to grow into $14,094 if the annual interest rate is 3.8% with daily compounding is approximately 0.5 years or 6 months. The rate of return can be calculated using the formula:rate of return = (final value / initial value)1/n – 1where n is the number of years. We are given that the shares are 81% cheaper than they were 11 years ago. Therefore, the initial value is 1 / (1 – 0.81) = 5.26 times the final value. We are also given that there was a 2:1 split and a 5:1 split. Therefore, the number of shares we have now is 10 times the number of shares we had 11 years ago. Using these values, we can calculate the rate of return. The rate of return is approximately 9.8%.

To learn more about initial debt visit:

brainly.com/question/32246921

#SPJ11

The amount concentration of 0.533 moles of sulfuric acid dissolved in a 123 mL solution is approximately 4.34 mol/L.

To determine the amount concentration (also known as molarity), we need to calculate the number of moles of sulfuric acid per liter of solution.

Amount of sulfuric acid = 0.533 moles

Volume of solution = 123 mL = 0.123 L

To calculate the amount concentration (molarity), we use the formula:

Molarity (M) = Amount of solute (in moles) / Volume of solution (in liters)

Molarity = 0.533 moles / 0.123 L

Molarity = 4.34 mol/L

Therefore, the amount concentration of 0.533 moles of sulfuric acid dissolved in a 123 mL solution is approximately 4.34 mol/L.

Learn more about concentration at https://brainly.com/question/15583382

#SPJ11

Hello!

-10 + 8x < 6x - 4

-10 < -2x - 4

-6 < -2x

3 < x

-2(5 - 4x) < 6x - 4

-10 + 8x < 6x - 4

8x - 6x < -4 + 10

2x < 6

x < 3

Answer:

No real number solution.

Step-by-step explanation:

y² = -64

Extract square root

[tex]\sqrt{y^2} =\sqrt{-64} \\y = \sqrt{8^2(-1)} \\y = 8i, y = -8i\\[/tex]

There is no real number solution. The solution consists of imaginary numbers represented by i.

Answer:

y^2 = -64

therfore,

y = [tex]\sqrt{-64}[/tex]

but a number under square root can never be negative until and unless it is a non-real number.

Thus, there is no solution to this.

thank you

Step-by-step explanation:

The tertiary alkyl halide is more responsive towards SN1 compared to auxiliary and essential alkyl halides particular. Methyl halides nearly never respond by means of an SN1 mechanism.

The alkyl structure plays a critical part in deciding the rate and result of SN1 (Substitution Nucleophilic Unimolecular) responses.

In SN1 responses, a nucleophilic substitution happens in two steps: the introductory ionization or separation of the substrate, shaping a carbocation middle, taken after by the assault of a nucleophile on the carbocation.

So, the rate of SN1 reactions is one that follows the pattern of: tertiary > secondary > primary > methyl alkyl halides

Read more about alkyl structure  here:

https://brainly.com/question/31502689

#SPJ4

We get the Laplace transform Y(s) of the solution y(t) to the initial value problem:y′′+5y=t⁴ , y(0)=0 , y′(0)=0 as:Y(s) = { 4! / s² } / [ s⁵ + 5s³ ] + [ 10 / (2s³) ] [ 5! / (s + √5)³ + 5! / (s - √5)³ ].

The solution y(t) to the initial value problem is:

y′′+5y=t⁴ ,

y(0)=0 ,

y′(0)=0

We are required to find the Laplace transform of the solution y(t) using the table of Laplace transforms and the table of properties of Laplace transforms. To begin with, we take the Laplace transform of both sides of the differential equation using the linearity property of the Laplace transform. We obtain:

L{y′′} + 5L{y} = L{t⁴}

Taking Laplace transform of y′′ and t⁴ using the table of Laplace transforms, we get:

L{y′′} = s²Y(s) - sy(0) - y′(0)

= s²Y(s)

and,

L{t⁴} = 4! / s⁵

Thus,

L{y′′} + 5L{y} = L{t⁴} gives us:

s²Y(s) + 5Y(s) = 4! / s⁵

Simplifying this expression, we get:

Y(s) = [ 4! / s⁵ ] / [ s² + 5 ]

Multiplying the numerator and the denominator of the right-hand side by s³, we obtain:Y(s) = [ 4! / s² ] / [ s⁵ + 5s³ ]

Using partial fraction decomposition, we can write the right-hand side as:Y(s) = [ A / s² ] + [ Bs + C / s³ ] + [ D / (s + √5) ] + [ E / (s - √5) ]

Multiplying both sides by s³, we get:

s³Y(s) = A(s⁵ + 5s³) + (Bs + C)s⁴ + Ds³(s - √5) + Es³(s + √5)

For s = 0, we have:

s³Y(0) = 5! A

From the initial condition y(0) = 0, we have:

sY(s) = A + C

For the derivative initial condition y′(0) = 0, we have:

s²Y(s) = 2sA + B

From the last two equations, we can find A and C, and substituting these values in the last equation, we get the Laplace transform Y(s) of the solution y(t).

Using partial fraction decomposition, the right-hand side can be written as:Y(s) = [ A / s² ] + [ Bs + C / s³ ] + [ D / (s + √5) ] + [ E / (s - √5) ]

Multiplying both sides by s³, we get:s³Y(s) = A(s⁵ + 5s³) + (Bs + C)s⁴ + Ds³(s - √5) + Es³(s + √5)

For s = 0, we have:

s³Y(0) = 5! A

From the initial condition y(0) = 0, we have:

sY(s) = A + C

For the derivative initial condition y′(0) = 0, we have:

s²Y(s) = 2sA + B

Substituting s = √5 in the first equation, we get:

s³Y(√5) = [ A(5√5 + 5) + C(5 + 2√5) ] / 2 + D(5 - √5)³ + E(5 + √5)³

Substituting s = -√5 in the first equation, we get:

s³Y(-√5) = [ A(-5√5 + 5) - C(5 - 2√5) ] / 2 + D(5 + √5)³ + E(5 - √5)³

Adding the last two equations, we get:

2s³Y(√5) = 10A + 2D(5 - √5)³ + 2E(5 + √5)³.

To know more about Laplace transforms visit :

https://brainly.com/question/33315896

#SPJ11

(a) Transition from n=2 to n=6: Energy is absorbed.

(b) Transition from radius 4.76 Å to radius 0.529 Å: Energy is emitted.

(c) Transition from n=6 to n=9: Energy is emitted.

(a) When an electron transitions from n=2 to n=6 in hydrogen, energy is absorbed. This is because electrons in higher energy levels have greater energy, and when they move to a higher level, they need to absorb energy.

(b) When an electron transitions from an orbit of radius 4.76 Å to one of radius 0.529 Å, energy is emitted. This is because electrons in smaller orbits have lower energy, and when they move to a lower energy level, they release excess energy in the form of electromagnetic radiation.

(c) When an electron transitions from the n=6 to the n=9 state in hydrogen, energy is emitted. Similar to the previous case, electrons moving to lower energy levels release excess energy, resulting in the emission of energy.

In summary:

(a) Energy is absorbed.

(b) Energy is emitted.

(c) Energy is emitted.

To learn more about energy visit : https://brainly.com/question/2003548

#SPJ11

Therefore, the probability of selecting at least 4 females if there are 10 females in the sample is 0.0626 or 626/10,000. Answer: 626/10000.

The total number of females in the sample is not specified, which makes the question difficult to answer. As a result, I am assuming that there are 10 females in the sample. The formula for calculating the probability of choosing at least 4 females is P(X>=4).When X follows a binomial distribution, the formula for calculating P(X>=4) is as follows: P(X>=4) = P(X=4) + P(X=5) + P(X=6) + P(X=7) + P(X=8) + P(X=9) + P(X=10)

Let's find the probability of selecting at least 4 females if there are 10 females in the sample.

P(X=4) = (10 C 4)*(6 C 2)/ (16 C 6)

= 210*15/8008

= 0.0397P(X=5)

= (10 C 5)*(6 C 1)/ (16 C 6)

= 252*6/8008

= 0.0189P(X=6)

= (10 C 6)*(6 C 0)/ (16 C 6)

= 210*1/8008

= 0.0026P(X=7)

= (10 C 7)*(6 C 0)/ (16 C 6)

= 120*1/8008

= 0.0013P(X=8)

= (10 C 8)*(6 C 0)/ (16 C 6)

= 45*1/8008

= 0.0002P(X=9)

= (10 C 9)*(6 C 0)/ (16 C 6)

= 10*1/8008

= 0.000P(X=10)

= (10 C 10)*(6 C 0)/ (16 C 6)

= 1*1/8008

= 0P(X>=4)

= P(X=4) + P(X=5) + P(X=6) + P(X=7) + P(X=8) + P(X=9) + P(X=10)

= 0.0626

Therefore, the probability of selecting at least 4 females if there are 10 females in the sample is 0.0626 or 626/10,000. Answer: 626/10000.

To know more abou probability visit;

brainly.com/question/31828911

#SPJ11

The minimum diameter of the solid steel shaft is approximately 42.9 mm.

the minimum diameter of a solid steel shaft can be determined by considering the torque applied and the desired maximum twist angle. To calculate the minimum diameter, we can use the formula:

[tex]τ = (T * L) / (π * d^4 / 32)[/tex]

where:
τ is the maximum shearing stress,
T is the torque (12 kNm),
L is the length of the shaft (6 m),
d is the diameter of the shaft.

We need to rearrange the formula to solve for d:

[tex]d^4 = (32 * T * L) / (π * τ)[/tex]

The shaft does not twist more than 3º, we can set the twist angle to radians:

[tex]θ = (π / 180) * 3[/tex]

Now we can calculate the maximum shearing stress using the formula:

[tex]τ = (T * L) / (π * d^4 / 32)[/tex]

Substituting the given values, we have:

[tex]τ = (12,000 Nm * 6 m) / (π * d^4 / 32)[/tex]

Let's assume the maximum shearing stress is 150 MPa (mega pascals). We can substitute this value into the equation:

[tex]150 MPa = (12,000 Nm * 6 m) / (π * d^4 / 32)[/tex]

Now we can solve for the minimum diameter, d:

[tex]d^4 = (32 * 12,000 Nm * 6 m) / (π * 150 MPa)\\d^4 = (76,800 Nm * m) / (3.1416 * 150 MPa)\\d^4 = 162.787 Nm * m / MPa[/tex]

Taking the fourth root of both sides:

[tex]d = (162.787 Nm * m / MPa)^(1/4)[/tex]

The minimum diameter of the solid steel shaft is approximately 42.9 mm.

Learn more about diameter with the given link,

https://brainly.com/question/28162977

#SPJ11

The stress in the bottom fiber of the section at midspan under the given condition is approximately -2.08 MPa.

To determine the required values for the prestressed concrete beam, we can follow the following steps:

Effective Prestress for No Deflection:

The effective prestress required can be calculated using the following equation:

Pe = (5 * w * L^4) / (384 * E * I)

Where:

Pe = Effective prestress

w = Total uniform load including its own weight (20 kN/m)

L = Span length (10 m)

E = Modulus of elasticity of concrete

I = Moment of inertia of the beam's cross-section

Assuming a rectangular cross-section for the beam (350 mm x 700 mm) and using the formula for the moment of inertia of a rectangle:

I = (b * h^3) / 12

Substituting the values:

I = (350 mm * (700 mm)^3) / 12

I = 171,500,000 mm^4

Assuming a modulus of elasticity of concrete (E) as 28,000 MPa (28 GPa), we can calculate the effective prestress:

Pe = (5 * 20 kN/m * (10 m)^4) / (384 * 28,000 MPa * 171,500,000 mm^4)

Pe ≈ 0.305 MPa

Therefore, the effective prestress required for the beam to have no deflection under the given load is approximately 0.305 MPa.

Stress in Bottom Fiber at Midspan:

To find the stress in the bottom fiber of the section at midspan, we can use the following equation for a prestressed beam:

σ = Pe / A - M / Z

Where:

σ = Stress in the bottom fiber at midspan

Pe = Effective prestress (0.305 MPa, as calculated in step 1)

A = Area of the beam's cross-section (350 mm * 700 mm)

M = Bending moment at midspan

Z = Section modulus of the beam's cross-section

Assuming the beam is symmetrically loaded, the bending moment at midspan can be calculated as:

M = (w * L^2) / 8

Substituting the values:

M = (20 kN/m * (10 m)^2) / 8

M = 312.5 kNm

Assuming a rectangular cross-section, the section modulus (Z) can be calculated as:

Z = (b * h^2) / 6

Substituting the values:

Z = (350 mm * (700 mm)^2) / 6

Z = 85,583,333.33 mm^3

Now we can calculate the stress in the bottom fiber at midspan:

σ = (0.305 MPa) / (350 mm * 700 mm) - (312.5 kNm) / (85,583,333.33 mm^3)

σ ≈ -2.08 MPa

Therefore, the stress in the bottom fiber of the section at midspan under the given condition is approximately -2.08 MPa (compressive stress). So, eliminate tension in the section, we need to add a concentrated load at midspan that counteracts the tensile forces.

To more about stress, visit:

https://brainly.com/question/26108464

#SPJ11

We draw Part 1) the shear diagram for the cantilever beam. Part 2) the moment diagram for the cantilever beam.

Part 1) To draw the shear diagram for a cantilever beam, follow these steps:

1. Identify the different sections of the beam, including the support and any point loads or reactions.
2. Start at the left end of the beam, where the support is located. Note that the shear force at this point is usually zero.
3. Move along the beam and consider each load or reaction. If there is a point load acting upward, the shear force will decrease. If there is a point load acting downward, the shear force will increase.
4. Plot the shear forces as points on a graph, labeling each point with its corresponding location.
5. Connect the points with straight lines to create the shear diagram.
6. Make sure to include the units (usually in Newtons) and the scale of the diagram.

Part 2) To draw the moment diagram for the cantilever beam, follow these steps:

1. Start at the left end of the beam, where the support is located. Note that the moment at this point is usually zero.
2. Move along the beam and consider each load or reaction. If there is a point load acting upward or downward, it will create a moment. The moment will be positive if it causes clockwise rotation and negative if it causes counterclockwise rotation.
3. Plot the moments as points on a graph, labeling each point with its corresponding location.
4. Connect the points with straight lines to create the moment diagram.
5. Make sure to include the units (usually in Newton-meters or foot-pounds) and the scale of the diagram.

Remember to pay attention to the direction of the forces and moments to ensure accuracy. Practice drawing shear and moment diagrams with different types of loads to improve your understanding.

Learn more about the cantilever beam from the given link-

https://brainly.com/question/27910839

#SPJ11

The solution to the equation is x = 48.125.

To solve the equation represented by the Babylonian tablet YBC 4652, let's break down the given equation and solve for x.

The equation is:

x + (x + x/7 + 1/11)(x + x/7) = 60

We'll simplify it step by step:

First, distribute the terms:

x + (x + x/7 + 1/11)(x + x/7) = 60

x + (x^2 + (2x/7) + (1/11)(x) + (1/7)(x/7)) = 60

x + (x^2 + (2x/7) + (x/11) + (1/49)x) = 60

Combine like terms:

x + x^2 + (2x/7) + (x/11) + (1/49)x = 60

Next, find a common denominator and add the fractions:

(49x + 7x^2 + 22x + 4x + x^2) / (49*7) = 60

(7x^2 + x^2 + 49x + 22x + 4x) / 343 = 60

8x^2 + 75x / 343 = 60

Now, multiply both sides by 343 to get rid of the denominator:

8x^2 + 75x = 343 * 60

8x^2 + 75x = 20580

Rearrange the equation in standard quadratic form:

8x^2 + 75x - 20580 = 0

To solve this quadratic equation, we can either factor it or use the quadratic formula. Factoring may not be easy, so let's use the quadratic formula:

x = (-b ± √(b^2 - 4ac)) / (2a)

Plugging in the values:

x = (-75 ± √(75^2 - 4 * 8 * -20580)) / (2 * 8)

x = (-75 ± √(5625 + 662400)) / 16

x = (-75 ± √667025) / 16

Now, calculate the square root and simplify:

x = (-75 ± 817.35) / 16

x = (-75 + 817.35) / 16 or x = (-75 - 817.35) / 16

x = 742.35 / 16 or x = -892.35 / 16

x ≈ 48.125 or x ≈ -55.772

Since the value of x cannot be negative in this context, the approximate solution to the equation is:

x ≈ 48.125

For more such questions on solution,click on

https://brainly.com/question/24644930

#SPJ8

Answer:

The correct answer is A. X= 48.125

Step-by-step explanation:

Answer:

0.2 or 20%

Step-by-step explanation:

The definition of probability is "the number of favorable outcomes over the total number of outcomes". So, to find the probability of someone getting an A, we must:

- Find the Frequency of Someone Getting an A

- Find the Total Frequency of the Distribution

- Divide the Two

As we can see in the table, if we add the Frequencies:

28 + 35 + 56 + 14 + 7 = ?

We get a total of:

140

Looking at the table once more, if we look at the frequency of someone getting an A, we can see that it is:

28

So, if we find the ratio of both values, like so down below:

28 : 140

And simplify it:

28 : 140 = 1 : 5

We can see that the ratio is simplified to 1 : 5, or in decimal and percentage terms, 0.2 and 20%.

The solution set for the logarithmic equation 2logx = log64 is {8, -8}.

Hence option is a (8,-8 ).

To solve the equation 2logx = log64, we can use the properties of logarithms.

Let's simplify the equation step by step:

Step 1: Apply the power rule of logarithms

The power rule of logarithms states that log(a^b) = b * log(a). We can apply this rule to simplify the equation as follows:

2logx = log64

log(x^2) = log64

Step 2: Set the arguments equal to each other

Since the logarithms on both sides of the equation have the same base (logarithm base 10), we can set their arguments equal to each other:

x^2 = 64

Step 3: Solve for x

Using the property mentioned earlier, we can simplify further:

2logx = 6log2

Now we have two logarithms with the same base. According to the property log(a) = log(b), if a = b, we can equate the exponents:

2x = 6

Dividing both sides of the equation by 2, we get:

x = 3

To find the solutions for x, we take the square root of both sides of the equation:

x = ±√64

x = ±8

Therefore, the solution set for the equation 2logx = log64 is {8, -8}.

The correct choice is A. The solution set is {8, -8}.

Learn more about logarithmic equation from the given link

https://brainly.com/question/30226560

#SPJ11

Answer:

AP is 9 inch

Step-by-step explanation:

It says right there on paper

The distance between the automobile and the farmhouse is increasing at a rate of approximately 19.2 miles per hour when the automobile is 7 miles past the intersection of the highway and the road.

Let x and y be the distance the automobile has traveled along the highway from the intersection, and  the distance between the automobile and the farmhouse, respectively.

When the automobile is 7 miles past the intersection, we have x = 7. find the rate of change of y, or dy/dt, at this instant.

Use Pythagorean theorem to relate x and y:

[tex]y^2 = 10^2 + x^2[/tex]

Differentiate both sides with respect to t

[tex]2y (dy/dt) = 0 + 2x (dx/dt)\\dy/dt = (x/y) (dx/dt)[/tex]

[tex]y^2 = 10^2 + 7^2 = 149\\y = \sqrt(149) \approx 12.2 miles.[/tex]

To find dx/dt, differentiate x with respect to time.

Since the automobile is traveling at a constant speed of 70 mph

dx/dt = 70 mph.

Substitute the values

[tex]dy/dt = (x/y) (dx/dt)\\= (7/\sqrt(149)) (70) \approx 19.2 mph[/tex]

Hence, the distance between the automobile and the farmhouse is increasing at a rate of approximately 19.2 miles per hour when the automobile is 7 miles past the intersection of the highway and the road.

Learn more on rate of increase on https://brainly.com/question/12614336

#SPJ4