an acid ha has a ka value of 4.40 x 10-4. 25.0 ml of 0.100 m ha is titrated with 0.25 m naoh. after the equivalence point is reached, 3 ml of 0.25 m naoh are added. what is the ph of the solution at this point?

Answer:

Explanation:

adbc

The polarity of a hydrogen bond and the electronegativity of the centre atom can affect the likelihood of a hydrogen ion leaving the molecule because they influence the strength of the bond between the hydrogen and the centre atom.

The more polar a hydrogen bond is, the weaker it is, and the more likely it is for the hydrogen ion to leave the molecule. This is because polar bonds have an uneven distribution of electrons, with one atom having a slightly negative charge and the other having a slightly positive charge. This means that the bond is not as strong as a nonpolar bond, where the electrons are shared equally between the atoms.

Additionally, the electronegativity of the centre atom can also affect the strength of the hydrogen bond. The more electronegative the centre atom is, the stronger the bond between the hydrogen and the central atom will be, and the less likely it is for the hydrogen ion to leave the molecule. Overall, a combination of a less polar hydrogen bond and a more electronegative centre atom will make it less likely for the hydrogen ion to leave the molecule, while a more polar hydrogen bond and a less electronegative centre atom will make it more likely for the hydrogen ion to leave the molecule.

Learn more about Hydrogen bonds, here:

https://brainly.com/question/11679211

#SPJ4

There are approximately 1.998 x 10^23 copper atoms in a 79 g sample of Monel.

Monel is an alloy of nickel and copper that contains 28% copper. This means that 100 g of the alloy contains 28 g of copper. To find the amount of copper in a 79 g sample of Monel, we can set up a proportion:

[tex]\dfrac{28\text{ g Cu}}{100\ g} = \dfrac{x\text{ g Cu}}{79\ g}[/tex]

Cross-multiplying, we get:

28 g Cu * 79 g = 100 g * x g Cu

Simplifying

x g Cu = (28 g Cu * 79 g) / 100 g

x g Cu = 22.12 g Cu

To find the number of copper atoms in this amount of copper, we can use Avogadro's number, which tells us the number of atoms in a mole of a substance:

1 mole Cu = 63.55 g Cu contains 6.022 x 10^23 atoms of Cu

Therefore, the number of copper atoms in 22.12 g of copper is:

(22.12 g Cu) / (63.55 g Cu/mol) * (6.022 x 10^23 atoms Cu/mol) = 1.998 x 10^23 atoms of Cu

To know more about alloy, here

brainly.com/question/18404834

#SPJ4

Answer:

The correct statements regarding vacuum filtration are:

A short-stem funnel can be used for a vacuum filtration.

The size of the funnel must be adjusted based on the quantities being handled.

Explanation:

Vacuum filtration is a technique commonly used in chemistry labs to separate solids from liquids. A short-stem funnel is often used as it provides a better seal with the filter paper. The size of the funnel is chosen based on the volume of the liquid being filtered. If it is too small, the liquid will take longer to pass through the filter, and if it is too large, the filter paper may tear or the solid may not be retained properly. However, some statements regarding vacuum filtration are incorrect. Filter paper can be used with a wide range of solutions, including acidic and basic ones, as long as the filter paper is compatible with the solution. A hirsch funnel requires filter paper to function correctly. Lastly, vacuum filtration should be avoided with boiling solutions as the filter paper can disintegrate or the flask may crack under the pressure. Instead, hot filtration is used by filtering the solution while it is hot and then allowing it to cool to room temperature before collecting the solid.

The correct options are: 1, 2, and 4. Vacuum filtration is a commonly used technique in chemistry for separating solids from liquids. It involves using a vacuum to create a pressure difference across a filter, causing the liquid to be drawn through the filter while leaving the solid behind.

The technique is used in a variety of applications, such as separating precipitates from solutions or collecting cells from a culture. The following statements are correct regarding a vacuum filtration:

1. A short-stem funnel can be used for a vacuum filtration.

2. The solution cannot be too acidic or too basic when using filter paper.

3. No filter paper is needed when using a Hirsch funnel.

4. The size of the funnel must be adjusted based on the quantities being handled.

Therefore, correct options are: 1, 2, and 4.

When performing a vacuum filtration, it is important to select the appropriate size and type of funnel for the amount and type of material being filtered. It is also crucial to choose the correct filter paper, which should be compatible with the chemical properties of the solution being filtered. The use of a fritted glass filter or a Hirsch funnel may be necessary in some cases.

Vacuum filtration can be a time-saving and efficient method of separating solids and liquids, but it is important to carefully follow proper techniques and safety precautions to avoid any accidents or contamination.

To learn more about Vacuum filtration here:

https://brainly.com/question/31326542

#SPJ11

Salicylic acid (SA) is soluble in organic solvents such as ether, benzene, and chloroform, but it is not soluble in water. Sodium salicylate, on the other hand, is water-soluble. Sodium hydroxide is used to neutralize the acidic solution generated when salicylic acid is hydrolyzed.

Sodium hydroxide is an alkaline solution that neutralizes the acid and produces sodium salicylate, which is water-soluble. The salicylic acid precipitates out of the solution as a result of the acidic work-up. The salt that results from the hydrolysis of salicylic acid is more soluble in water than salicylic acid due to its polar nature. Salicylic acid is a weak acid with a polar carboxylic acid functional group and a non-polar benzene ring. When the polar carboxylic acid group interacts with water, it forms hydrogen bonds with water molecules. The non-polar benzene ring, on the other hand, is insoluble in water due to its non-polar nature. The salt formed after hydrolysis, such as sodium salicylate, is more soluble in water than salicylic acid because it is more polar than salicylic acid. As a result, the salt dissolves easily in water.

to learn more about: Salicylic acid

https://brainly.com/question/14925906

#SPJ11

When the value of Keq is greater than 1, the equilibrium is shifted toward the products. Therefore, if Keq is equal to 6.5, the product is favored at equilibrium. Answer: a. product.

Keq is defined as the equilibrium constant for a chemical reaction. It is a measure of the extent to which the reaction proceeds to form products versus starting materials at equilibrium. When Keq is greater than 1, it indicates that the products are more stable and favored at equilibrium.

Conversely, when Keq is less than 1, it indicates that the starting materials are more stable and favored at equilibrium. When Keq is equal to 1, it indicates that the reaction is at equilibrium and there is an equal amount of products and starting materials present.

The correct answer is option a.

To know more about equilibrium refer to-

brainly.com/question/30807709#

#SPJ11

a) Biosynthesis, like cellular metabolism, is the production of natural compounds via enzymatic reactions. b) Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration.

Cellular metabolism is the process by which cells convert nutrients and oxygen into energy, a process known as cellular respiration. Specifically, cellular metabolism involves the breakdown of sugar molecules (glucose) for energy, the production of the molecule ATP (adenosine triphosphate), and the exchange of molecules between cells.

A selectively permeable membrane is one that permits only certain substances and molecules to enter or exit the cell. The cell membrane is an illustration of a selectively permeable membrane. It permits only certain types of molecules to pass through diffusion and, on rare occasions, facilitated diffusion.

Cell response is the way a cell responds to a change in the environment. A cell response could be a physical change such as a change in shape or movement, or a chemical change such as a change in metabolism or the production of proteins or hormones. Cells process stimuli from the environment, either through receptors on the cell surface or internal signaling proteins. Once a response is triggered, cells can undergo various responses at the molecular, cellular, or organismal level. For example, when a foreign antigen is detected, a cell response can trigger an immune response such as inflammation. Alternatively, a cell response can be triggered by a hormone, which can induce cell differentiation or cell death.

Absorption is the process by which the digestive products are absorbed by the blood and distributed to the remainder of the body. The digested products are transported into the blood or lymph via the mucous barrier during absorption.

A typical plant cell consists of a cell wall (provides structure and protection), a plasma membrane (regulates what enters and leaves the cell), a nucleus (controls the cell's activities), cytoplasm (houses cellular organelles and dissolved materials), vacuoles (stores materials), and chloroplasts (site of photosynthesis).

A typical animal cell is made of a nucleus, cytoplasm, cell (plasma) membrane, mitochondria, and endoplasmic reticulum. The nucleus contains DNA and is the control centre of the cell; the cytoplasm is a jelly-like substance that contains salts, proteins, and enzymes; the cell membrane is a thin barrier controlling the exchange of materials between the inside and outside of the cell; the mitochondria are the 'powerhouse' of the cell, producing energy; and the endoplasmic reticulum is a series of folded membranes that assist in protein synthesis and transport.

To know more about inflammation , visit ;

https://brainly.com/question/608378

#SPJ1

In the citrate cycle, also known as the Krebs cycle or TCA cycle, the production of NADH occurs in several steps. The reaction that produces NADH from the given options is not the oxidation of succinate by succinate dehydrogenase to form fumarate. This particular reaction generates FADH2 instead of NADH.

However, there are other reactions within the citrate cycle that do produce NADH. These include:

1. Isocitrate dehydrogenase: This enzyme catalyzes the conversion of isocitrate to alpha-ketoglutarate, which results in the production of NADH.

2. Alpha-ketoglutarate dehydrogenase complex: This enzyme complex converts alpha-ketoglutarate to succinyl-CoA, generating another molecule of NADH.

3. Malate dehydrogenase: This enzyme catalyzes the conversion of malate to oxaloacetate, producing NADH in the process.

In summary, the oxidation of succinate by succinate dehydrogenase to form fumarate does not produce NADH. Instead, it produces FADH2. The production of NADH in the citrate cycle occurs during the reactions catalyzed by isocitrate dehydrogenase, alpha-ketoglutarate dehydrogenase complex, and malate dehydrogenase.

Know more about Krebs cycle here :

brainly.com/question/6260517

#SPJ11

The kinetic energy of molecules depends on absolute temperature. So here since all the temperature are equal, all the molecules will have same average kinetic energy. So option 4 is right.

Kinetic energy of a molecule of a gas depends on the movement of the molecule. It is governed by the kinetic gas equation. The kinetic energy and temperature is related by the equation

KE = [tex]\frac{3}{2}[/tex] nRT

n is the number of moles

R is universal gas constant

T is the absolute temperature

KE is directly proportional to the temperature and increases and decreases with it. Here all gases exists at the same temperature. Pressure does not have any effect on the kinetic energy of gases.

So option 4 will be the correct answer.

For more information regarding Kinetic energy of gases, kindly refer

https://brainly.com/question/2696774

#SPJ4

Chemical reaction characteristics. A shift in colour. a shift in the temperature. State change. creation of new materials.

Flammability, cytotoxicity, acidity, reactivity (of various kinds), and heat of combustion are a few examples of chemical qualities. Rust, for instance, is created when iron and oxygen interact in the when water is present; chromium does not oxidise ([link]).

The five basic types of chemical reactions are combination, decomposition, one, double replacement, and combustion. By analysing the reactants and products, you can assign a reaction to one of these categories.

To know more about temperature visit:

https://brainly.com/question/14633960

#SPJ1

The oxidation number of iron in Fe3O7 is not constant, but the average oxidation number of iron in this compound is 4.67.

To find the average oxidation number of iron (Fe) in Fe3O7, we can use the fact that the sum of the oxidation numbers of all atoms in a neutral molecule or compound is equal to zero.

Let the oxidation number of Fe be x. The oxidation number of oxygen (O) is -2.

The compound Fe3O7 contains 3 iron atoms and 7 oxygen atoms. Using the fact that the sum of the oxidation numbers is zero, we can set up the following equation:

3x + 7(-2) = 0

Solving for x, we get:

3x - 14 = 0

3x = 14

x = 4.67

Therefore, the average oxidation number of iron in Fe3O7 is 4.67, the average oxidation number is not restricted to integer values.

To learn more about average oxidation number, refer:

https://brainly.com/question/29201509

#SPJ4

c. Hydrocarbons make up the majority of petroleum, but it also includes hydrocarbon derivatives that contain oxygen, nitrogen, and Sulphur. Between four and twenty carbon atoms per hydrocarbon make up the hydrocarbons in petroleum.

These substances combine to generate a wide range of intricate molecular structures, some of which are difficult to distinguish. Almost all crude oil, notwithstanding variances, contains between 12 and 15 percent hydrogen and 82 and 87 percent carbon by weight. The main components of petroleum and natural gas are hydrocarbons. They are used as lubricants, fuels, and raw materials for making industrial chemicals, polymers, fibers, rubber, solvents, and explosives.

Learn more about Hydrocarbons here:

https://brainly.com/question/11344764

#SPJ4

Complete question:

petroleum is a gooey liquid consisting primarily of group of answer choices.

A. oxygen

B. silicon

C. hydrocarbon compounds

D.  sulfur

Answer:

Hello again. dihydro gen-oxide is a  colorless, tasteless, and odorless gas. It is insoluble in water. It is highly combustible. It is lighter than air.  Its melting point is 13.96K. Its boiling point is 20.39K. Its density is 0.09 g/L.

Explanation:

Hope this helps! =D

Mark me brianliest! =D

Answer:

What are the physical properties of dihydrogen oxide?

Melting point: 32°F. Boiling point: 100°C. Density: 997 kg/m3. Chemical formula:

Explanation:

To determine the total number of atoms in the molecular formula of the compound, we need to know the molecular formula itself. Hence, the molecular formula of the compound would be C1H0.36O3.6.

Assuming that the compound contains only carbon, hydrogen, and oxygen atoms, we can calculate the total number of atoms in the molecular formula as follows:

Molar mass of compound = (number of carbon atoms x atomic mass of carbon) + (number of hydrogen atoms x atomic mass of hydrogen) + (number of oxygen atoms x atomic mass of oxygen)

120.1 g/mol = (x carbon atoms x 12.01 g/mol) + (y hydrogen atoms x 1.01 g/mol) + (z oxygen atoms x 16.00 g/mol)

Simplifying the equation, we get:

12.01x + 1.01y + 16.00z = 120.1

To solve for the values of x, y, and z, we need additional information. However, we can make some assumptions based on the typical ratios of carbon, hydrogen, and oxygen atoms in organic compounds.

For example, if we assume that the compound contains only carbon, hydrogen, and oxygen atoms in a ratio of 1:2:1, we can write the following system of equations:

x + 2y + z = total number of atoms in the molecular formula

12.01x + 1.01y + 16.00z = 120.1

Substituting the first equation into the second equation and solving for x, we get:

12.01(x + 2y + z) + 1.01y + 16.00z = 120.1

12.01x + 25.03y + 28.01z = 120.1

12.01x = 120.1 - 25.03y - 28.01z

x = (120.1 - 25.03y - 28.01z)/12.01

We can then substitute this value of x into the first equation and solve for y and z:

(120.1 - 25.03y - 28.01z)/12.01 + 2y + z = total number of atoms in the molecular formula

Simplifying this equation and solving for y, we get:

y = (total number of atoms in the molecular formula - z - 2)/(14.04)

We can then use this value of y to solve for z:

z = (total number of atoms in the molecular formula - 2 - 14.04y)

If we assume that the total number of atoms in the molecular formula is 10, we can calculate the number of carbon, hydrogen, and oxygen atoms as follows:

x = 1

y = (10 - 2 - 14.04(2))/(14.04) ≈ 0.36

z = (10 - 2 - 14.04(0.36)) ≈ 3.6

However, the molecular formula of the compound would be C1H0.36O3.6, which has a total of 5.96 atoms. it is important to note that this is just an example based on assumptions, and the actual molecular formula may be different.

Learn more about Molecular formulas here:

brainly.com/question/28647690

#SPJ4

The percent ionization of the acid is 0.37%.

Percent ionization is the fraction or percentage of a weak acid or base that dissociates into ions in solution. It is calculated by dividing the concentration of the ionized species (either H⁺ or OH⁻) by the initial concentration of the weak acid or base and multiplying by 100%.

The percent ionization of the acid can be calculated using the following equation; % ionization = [H⁺]/[HA] x 100%

where [H⁺] is the concentration of the hydronium ion at equilibrium and [HA] is the initial concentration of the acid.

First, we need to calculate the concentration of the hydronium ion at equilibrium using the pH;

pH = -log[H⁺]

2.20 = -log[H⁺]

[H+] = [tex]10^{(-2.20)}[/tex]

[H+] = 6.31 x 10⁻³ M

Next, we can calculate the percent ionization:

% ionization = [H⁺]/[HA] x 100%

% ionization = (6.31 x 10⁻³ M / 1.7 M) x 100%

% ionization = 0.37%

To know more about percent ionization here

https://brainly.com/question/13161344

#SPJ4

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out the final volume, so we can put the values and solve for the final volume -

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 6 \times 4= 2\times V_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \dfrac{6 \times 4 }{2}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2 = \cancel{\dfrac{ 24}{2}}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{V_2 = 12 \:L }\\[/tex]

Therefore, the new volume of the gas will become 12 L at 2atm.

We will need a total of 8 cups of oil to prepare enough cakes to use up 4 dozen eggs.

To prepare enough cakes to use up 4 dozen eggs, we will need a total of; 4 dozen eggs = 4 x 12 = 48 eggs

Since each cake requires 3 eggs, we can calculate the number of cakes we can make as;

48 eggs ÷ 3 eggs per cake = 16 cakes

To predict how much oil will be needed to prepare these 16 cakes, we can use the conversion factor provided in the chemical equation

0.5 cup oil  1 cake mix

This tells us that we will need 0.5 cup of oil for each cake mix used. Since we will be using 16 cake mixes (one for each cake), we can multiply the conversion factor by the number of cake mixes to find the total amount of oil needed;

0.5 cup oil  1 cake mix x 16 cake mixes

= 8 cups of oil

To know more about conversion factor here

https://brainly.com/question/20822566

#SPJ4

When benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction.

Salicylic acid is expected to be partially soluble in NaHCO₃ due to its acidic nature. Salicylic acid has a carboxylic acid group which can ionize in the presence of a base such as NaHCO₃ to form a salt that is partially soluble in water. However, the solubility of salicylic acid in NaHCO₃ will not be as high as that of a strong acid like HCl.

When a benzoic acid derivative, such as salicylic acid, is reacted with a base such as NaHCO₃, it undergoes acid-base neutralization reaction. The benzoic acid derivative reacts with the base to form a salt and water. The salt formed is usually more polar and more soluble in water than the original benzoic acid derivative.

Reaction will be represented by the following equation; Benzoic acid derivative (acid) + NaHCO₃ (base) → Salt (more polar) + H₂O

In the case of salicylic acid, the reaction can be represented as;

C₆H₄(OH)COOH (salicylic acid) + NaHCO₃ (base) → C₆H₄(OH)COONa (sodium salicylate) + H₂O

The pKa value of benzoic acid is 4.2, which means that it is a weak acid and will react with a weak base like NaHCO₃ to form a salt. The pKa value of H₂CO₃ is 10.3, which means that it is a strong acid and will not react with a weak base like NaHCO₃.

To know more about benzoic acid here

https://brainly.com/question/28168596

#SPJ4

The statements which best describes the synergistic interaction effect is option b. An interaction between two or more medicines that increases their effectiveness.

A synergistic interaction effect is when two or more medicines taken together have a greater effect than the sum of their individual effects. This can lead to an increased effectiveness of the treatment.

Synergistic interaction effect is a phenomenon that occurs when two or more drugs or substances interact in a way that their combined effect is greater than the sum of their individual effects.

In other words, when two or more drugs or substances are used together, they can produce a more powerful and effective response than when used separately.

For more question on synergistic interaction effect click on

https://brainly.com/question/10564761

#SPJ11

We are going to utilize the accompanying formula to determine the amount of heat necessary to warm a particle of iron between 14.15 degrees Celsius through 100.00 degrees Celsius:

Q = m * c * ΔT

where Q denotes the quantity of heat

m = sample mass (in grams)

c = specific heat of the material (in J/g*C)

T = temperature variation (in C)

Substituting the provided values yields:

Q = 89.05 g * 0.450 J/gC * (100.00 C - 14.15 C)

Q = 89.05 g * 0.450 J/gC * 85.85 C

Q = 3,451.52 J

As a result, the thermal energy required to heat an 89.05 gram sample of iron from 14.15°C to 100.00°C is 3,451.52 J. (joules).

To know more about iron click here

brainly.com/question/30570319

#SPJ4

In the experiment, you will combine different volumes of NaOH and an unknown acid and measure the temperature for each combination. The ratios of volumes that give the highest temperature change on the graph will be equal to the stoichiometric ratio or the equivalence point of the reaction.

The equivalence point is the point at which the moles of NaOH and the moles of the unknown acid are perfectly balanced, resulting in the greatest temperature change due to the complete neutralization of the acid and base. To find this ratio, follow these steps:

1. Record the initial temperature of the NaOH and unknown acid solutions separately.
2. Combine different volumes of NaOH and the unknown acid in a series of trials, making sure to note the specific volumes used for each trial.
3. Measure the final temperature of the solution after each combination, and calculate the temperature change by subtracting the initial temperatures from the final temperature.
4. Plot the temperature changes on a graph with the x-axis representing the volume ratio of NaOH to the unknown acid, and the y-axis representing the temperature change.
5. Observe the graph and identify the point with the highest temperature change, which corresponds to the stoichiometric ratio or equivalence point of the reaction.

The ratio at this highest point is the correct proportion of NaOH to the unknown acid required for complete neutralization.

Learn more about equivalence point here:

brainly.com/question/29999744

#SPJ11

Option A). The salts that will be substantially more soluble in an acidic solution than in pure water are PbCl₂, Al(OH)₃, and FeS.

1. Look for salts containing anions that can react with H+ ions from acidic solutions, making them more soluble. These anions include Cl-, OH-, S₂-, and PO₄₃-.
2. From the given choices, identify the salts containing these anions:
  - PbCl₂ (contains Cl-)
  - Al(OH)₃ (contains OH-)
  - Ba₃(PO₄)₂ (contains PO₄₃-)
  - FeS (contains S₂-)
3. Consider the cations' ability to form soluble complexes with the anions. Al₃+ and Fe₂+ can form soluble complexes with OH- and S₂-, respectively, while Pb₂+ can form soluble complexes with Cl-.
4. Based on this analysis, the salts that will be more soluble in acidic solutions are:
  - PbCl₂
  - Al(OH)₃
  - FeS

For more such questions on salts

brainly.com/question/13818836

#SPJ11

#SPJ4

Full Question

usnco when the substances are arranged in order of increasing boiling points, which order is correct?

The most appropriate research agenda for my community would be focusing on how to reduce poverty and increase economic opportunities.

This would involve researching the current economic conditions in my community, identifying areas where poverty is most prevalent, and exploring potential solutions to create more jobs and increase economic mobility.

Additionally, this may involve researching the effectiveness of government programs and initiatives in the area, as well as exploring potential partnerships with local businesses and organizations to create new economic opportunities.

For more question on research click on

https://brainly.com/question/3628862

#SPJ11

The terms are zn, hpo32-, 2h2o, h2po2-, zn(oh)2, and oh-In the above reaction, the oxidation state of phosphorus changes from 5 to 3. In the reaction, four electrons are transferred from Zinc(Zn) to HPO32-.Therefore, the correct answer is : Four electrons are transferred in the reaction.

The oxidation state is the same as the oxidation number. Oxidation state is the charge on the atom of an element when all other atoms are removed from the molecule as ions. The oxidation state of phosphorus changes from 5 to 3 in the given reaction. In the beginning, the phosphorus atom has an oxidation number of +5. In the final product, phosphorus has an oxidation number of +3. Hence, the oxidation state of phosphorus changes from 5 to 3. Electrons transferred Four electrons are transferred from Zinc (Zn) to HPO32- in the reaction.

The electrons transferred are equal to the difference in the oxidation state of the reactants and the products. In the given reaction, the difference in oxidation state is (5-3) = 2. Since one electron is transferred for each unit change in oxidation state, there are two electrons transferred. Therefore, four electrons are transferred in the reaction.
In the given reaction:
Zn + HPO3²⁻ + 2H2O → H2PO2⁻ + Zn(OH)2 + OH⁻
So the oxidation state of phosphorus changes from +5 in HPO3²⁻ to +1 in H2PO2⁻. A total of 4 electrons are transferred in this reduction process.

For more questions on: electrons

https://brainly.com/question/29522188

#SPJ11  

180.3 grams of Zn are necessary to completely react with 0.400 L of 4.60 M [tex](Fe_2(SO_4)_3)[/tex] solution.

The balanced chemical equation for the reaction between solid zinc (Zn) and aqueous iron(III) sulfate [tex](Fe_2(SO_4)_3)[/tex] can be written as:

[tex]2 Fe_2(SO_4)_3 + 3 Zn = 3 ZnSO_4 + 2 Fe_2O_3[/tex]

According to the stoichiometry of the balanced equation, 3 moles of Zn react with 2 moles of [tex]Fe_2(SO_4)_3[/tex]. We can use this ratio to calculate the moles of Zn required to react with 0.400 L of 4.60 M [tex](Fe_2(SO_4)_3)[/tex] solution:

moles of [tex](Fe_2(SO_4)_3)[/tex] = Molarity x Volume

moles of [tex](Fe_2(SO_4)_3)[/tex] = 4.60 M x 0.400 L = 1.84 mole

moles of Zn = (3/2) x moles of [tex](Fe_2(SO_4)_3)[/tex]

moles of Zn = (3/2) x 1.84 = 2.76 moles

Finally, we can use the molar mass of Zn to convert the moles of Zn to grams:

mass of Zn = moles of Zn x molar mass of Zn

mass of Zn = 2.76 moles x 65.38 g/mol = 180.3 g

For more question on Zn click on

https://brainly.com/question/19535295

#SPJ11

The solubility of strontium iodate, Sr(IO3)2, in water is 6.27 x 10^-4 M. The Ksp for Sr(IO3)2 is 1.14 × 10^-7.

Solubility Product Constant (Ksp) is the product of the concentration of the dissolved ions, which, when multiplied, would be equal to the equilibrium constant expression for the ion formation in a saturated solution. The solubility product constant (Ksp) for Sr(IO3)2 is 1.14 × 10^-7.

Ksp is represented as the product of the concentration of the ions, which is [Sr2+][IO32-].Let’s suppose the solubility of strontium iodate in water is S moles/L.Substituting the value of solubility into the Ksp expression, we have;Ksp = [Sr2+][IO32-]1.14 × 10^-7 = S x 2S2 x 3S2

We can now solve for S, which is the solubility of strontium iodate, as follows:S = 6.27 x 10^-4 MTherefore, the solubility of strontium iodate, Sr(IO3)2, in water is 6.27 x 10^-4 M.

To know more about solubility refer to-

brainly.com/question/28170449#

#SPJ11

The equilibrium concentrations of reactant and products when 0.388 moles of PCl5(g) are introduced into a 1.00 L vessel at 500 K is 0.063 M.

Equilibrium concentration can be defined as when the both the reactants and the products of the reaction are in a concentration that is not in change with time. This is called as the state of chemical equilibrium. In the equilibrium state, the rate of forward reaction is same as the rate of backward reaction  when the reaction is at equilibrium. Equilibrium concentration being the ratio of the concentrations raise to the stoichiometric coefficients.

Kc = [PCl3][Cl2]/[PCl5] = 1.2x10-2

Kc = [PCl3][Cl2]/[PCl5] = (x)(x)/(0.388-x) = 1.20x10-2 =

x2 + 1.2x10-2x - 4.66x10-3 = 0

x = -b ± √b2 - 4ac2a

x = 0.0626

[PCl5] = 0.388 - x = 0.388 - 0.0626 = 0.325 M

[PCl3] = [Cl2] = x = 0.063 M

To learn more about equilibrium concentrations

https://brainly.com/question/10838453

#SPJ4

The complete question is,

Calculate the equilibrium concentrations of reactant and products when 0.388 moles of PCl5(g) are introduced into a 1.00 L vessel at 500 K.

The solubility of Ag₂O in a solution buffered at pH 10.50 is approximately 1.46 x 10⁻⁴ M.

The solubility of silver oxide (Ag₂O) in a solution buffered at pH 10.50 depends on the specific buffer used, as well as the temperature and pressure of the system. However, we can make some general predictions based on the solubility product constant (Ksp) of silver oxide and the pH of the buffer.

At pH 10.50, the solution is basic. The basicity will cause the silver oxide to hydrolyze, which means it will react with water to form a silver hydroxide compound. The balanced chemical equation for this reaction is; Ag₂O + H₂O → 2AgOH

The solubility of Ag₂O will then depend on the solubility of AgOH, which has its own Ksp value. The Ksp of AgOH is 1.5 x 10⁻⁸ at 25°C.

If we assume that the hydrolysis reaction has reached equilibrium, we can use the Ksp of AgOH to calculate the solubility of Ag₂O. At equilibrium, the product of the concentrations of the silver and hydroxide ions is equal to Ksp.

[Ag⁺][OH⁻]² = Ksp

Since the hydrolysis reaction produces two moles of AgOH for every mole of Ag₂O, we can write the expression for Ksp in terms of the solubility of Ag₂O, x;

(2x)[OH⁻]² = Ksp

We also know that at pH 10.50, the concentration of hydroxide ions ([OH⁻]) is 3.16 x 10⁻⁴ M. Substituting these values into the expression for Ksp, we can solve for x;

(2x)(3.16 x 10⁻⁴)² = 1.5 x 10⁻⁸

x = 1.46 x 10⁻⁴

To know more about solubility here

https://brainly.com/question/22185953

#SPJ4

The Ksp value of Ag₃PO₄ is 2.17 × 10⁻²².

The solubility product constant (Ksp) expression for Ag₃PO₄ will be;

Ag₃PO₄(s) ⇌ 3 Ag⁺(aq) + PO₄³⁻(aq)

Equilibrium expression for this reaction will be written as;

Ksp = [Ag⁺]³[PO₄³⁻]

We are given the solubility of Ag₃PO₄, which is 0.013 grams per liter. To calculate the concentration of Ag⁺ and PO₄³⁻ in the saturated solution, we need to first calculate the molar solubility of Ag₃PO₄

Molar solubility of Ag₃PO₄ = (0.013 g/L) / (418.58 g/mol) = 3.11 x 10⁻⁵ M

Since the stoichiometry of the reaction is 1:3 for Ag⁺ and PO₄³⁻, we can write;

[Ag⁺] = 3 × 3.11 × 10⁻⁵ M = 9.33 × 10⁻⁵ M

[PO₄³⁻] = 3.11 × 10⁻⁵ M

Substituting these values into the Ksp expression, we get;

Ksp = (9.33 × 10⁻⁵)³ × (3.11 × 10⁻⁵)

= 2.17 × 10⁻²²

To know more about Ksp value here

https://brainly.com/question/28167974

#SPJ4