Answer:
yes
Explanation:
because the strong winds and the weight and there are more things to break
Explanation:
A tall tree may have more resistance to the wind since it has more mass ( branches, leaves). That means the wind has more mass to push against. Winds may also be stronger at a higher level. Tall trees have been growing longer and have more chances to have been compromised by insects, animals, fungi and so on. They also have less flexibility since they need to be more rigid to hold up the mass of branches they have.
The live wire comes loose and touches the metal case explain how the Earth wire and fuse together make the heater electrically safe
Answer:
You would get an electric shock if the live wire inside an appliance, such as a cooker, came loose and touched the metal casing. ... A strong current surges through the earth wire because it has a very low resistance . This breaks the fuse and disconnects the appliance.
Explanation:
I'm not sure but I hope it helps!
If a 2kg metal slug is heated with 1275J of energy which raises its temperature 15K, what is the metal's specific heat capacity?
Answer:
42.5J/kgk
Just use the formula
C = Q/m x change in temp
Give an example for each of the following, where the force:
a) changes the direction of a moving object.
b) changes the speed of a moving object.
c) changes the shape and size of an object.
d) stops a moving object.
e) moves a stationary object.
Explanation:
A cricket player hitting the ball from opposite direction.A footballer kicking ball with more force.Heating of a plastic bottle.Applying brake of a car.rolling a stopped marble on a table.a). The gravitational forces between the Earth and the Sun bends the Earth's motion along a curving path instead of a straight line.
b). The gravitational forces between the Earth and a falling rock make the rock fall faster and faster.
c). The force of a pressurized stream of hot air makes a balloon get rounder and bigger.
d). The gravitational forces between the Earth and a rock tossed straight up make the rock go slower and slower, and eventually stop. (In the next instant, it starts falling, as described in answer-b.))
e). The acoustic and emotional force of your mother's voice 15 minutes before the school-bus arrives causes you to turn over, sit up, and start putting on your socks.
State Archimedes principle
[tex]\huge\bigstar{\underline{{\red{A}{\pink{n}{\color{blue}{s}{\color{gold}{w}{\color{aqua}{e}{\color{lime}{r}}}}}}}}}\huge\bigstar[/tex]
Archimedes’ principle is the physical law of buoyancy, discovered by the ancient Greek mathematician and inventor Archimedes, stating that any body completely or partially submerged in a fluid (gas or liquid) at rest is acted upon by an upward, or buoyant, force, the magnitude of which is equal to the weight of the fluid displaced by the body. The volume of displaced fluid is equivalent to the volume of an object fully immersed in a fluid or to that fraction of the volume below the surface for an object partially submerged in a liquid. The weight of the displaced portion of the fluid is equivalent to the magnitude of the buoyant force. The buoyant force on a body floating in a liquid or gas is also equivalent in magnitude to the weight of the floating object and is opposite in direction; the object neither rises nor sinks. For example, a ship that is launched sinks into the ocean until the weight of the water it displaces is just equal to its own weight. As the ship is loaded, it sinks deeper, displacing more water, and so the magnitude of the buoyant force continuously matches the weight of the ship and its cargo.
Answer:
Archimedes principle states that"When a body is fully or partially immersed in a liquid,it experience an upthrust which is equal to the weight of the liquid displaced"
pls ans fast and i will mark brainlist. pls
Answer:
the thumb
Explanation:
pressure is exerted more by an area of small surface area.
pressure is got by P=Force/Area in contact
on the thumb there is a smaller area in contact. so as the area reduces, the force exertes becomes greater.
give in one word answer :
combination of cell in series
Answer:
The combination of cells in which the negative terminal of a first cell is connected with the positive terminal of second cell and the negative terminal of a second cell is connected to the positive terminal of a third cell and so on is known as series combination of cells.
Explanation:
hope this helps to u
Answer:
Battery.
Hope it is helpful....Which diagram shows the effect of cutting the
acceleration in Part A in half and not changing
the value of the initial velocity?
Acceleration is the rate of change of velocity over time. The diagram that shows the effect of cutting acceleration by half without changing initial velocity is graph (c)
The equation is given as:
[tex]v = 2t + 4[/tex]
The first equation of motion is:
[tex]v = u + at[/tex]
By comparing both equations, we have:
[tex]u = 4[/tex] --- initial velocity
[tex]a = 2[/tex] --- acceleration
When the acceleration is cut in half, the new acceleration is:
[tex]a_{new} = \frac a2[/tex]
[tex]a_{new} = \frac 22[/tex]
[tex]a_{new} = 1[/tex]
So, the equation of velocity is:
[tex]v = u + at[/tex]
[tex]v = 4 + 1 \times t[/tex]
[tex]v = 4 + t[/tex]
When [tex]t = 0[/tex]
[tex]v = 4 + 0 = 4[/tex]
When [tex]t = 1[/tex]
[tex]v = 4 + 1 = 5[/tex]
The graph of velocity that satisfies [tex]v = 4 + t[/tex] and the values of time (t) and velocity (v) tested above is (c).
See attachment for the diagram (graph)
Read more about velocity and acceleration at:
https://brainly.com/question/2239252
Between which types of elements do ionic bonds occur, and how do electrons act within the bond
o nonmetals and nonmetals, electrons shared
o metals and metals, electrons freely moving
O metals and nonmetals, electrons transferred
nonmetals and metals, electrons shared
Ionic bonds form when a nonmetal and a metal exchange electrons, while covalent bonds form when electrons are shared between two nonmetals. An ionic bond is a type of chemical bond formed through an electrostatic attraction between two oppositely charged ions.
the real answer is
O metals and nonmetals, electrons transferrednonmetals and metals, electrons shared
1000 mm =
covert the following into metres with working
Answer:
1m
Explanation:
The conversion is 1mm = 0.001m. So all we need to do to find how many mm there are in a meter, all we need to do is divide by a 1000;
1000 / 1000 = 1m
Best of Luck!
QİYour pair of boots has a mass of 850g if each boot has
exactly the same mass what is the weight of each boot?
Answer:
It is 4,250 N
Explanation:
Mass of each boot:
[tex] = \frac{1}{2} \times 850 \\ \\ = 425 \: g[/tex]
Weight:
[tex]{ \sf{weight = mass \times acceleration}} \\ { \sf{weight = 425 \times 10}} \\ { \sf{weight = 4250 \: newtons}}[/tex]
34.9x46x809 Please helpp
please mark this answer as brainlist
a radioactive element has a half-life of 30 days. calculate the mass of the element that remains after 20 days if 100g of the element decays. Also, calculate the decay constant.
Explanation:
the answer is in the image above
the ice and steam points of a thermometer at 25.2ohms find the corresponding value in degrees centigrade when it read 38.0 ohms
Answer:
No answer available
PLEASE MARK AS BRAINLIEST ANSWER
Fluorine has 7 valence electrons. Which charge is its ion likely to have?(1 point)
1+
5+
1–
5-
Answer:
1–
Explanation:
The fluorine is the element with biggest electronegativity in the periodic table, so it usually always take an electron and gets charge 1–
The valence electrons that Fluorine possesses is 7. Then, the charge of its ion would most probably be:
C). 1–
Fluorine is the element having F as its symbol and 9 as its atomic number(9 protons).
As we know, valence electrons are the electrons that are available in the surface shell of the atom. This is the reason that such electrons can make bonding with some other atoms as well. Since Fluorine contains 7 valence electrons, it would have a charge of 1– because it will acquire extra electrons to form the bond. Fluorine's valence shell would contain [tex]2s^{2} 2P^{5}[/tex] i.e. 7 valence electrons.Thus, Fluorine is the chemical element that possesses the highest electronegativity i.e. of around 3.98.Learn more about 'chemical elements' here:
brainly.com/question/18681051
How is the frictional force produced? please answer my question in simple language..
Explanation:
Frictional force is produced when two different objects are in very close contact and are slided against each other.
It also depends on the roughness of the object i.e, the rougher will be the object the higher friction will be produced and vice-versa.
34.9x46x809 I need help again
Answer:
1,298,768.6hope that helps uh..☺
Answer:
1298768.6
Explanation:
34.9 x 46 = 1605.4
1605.4 x 809 = 1298768.6
pls guys i have a serious question thats in my brain for a long time.
Find the highest acceleration
best answer = brainlist
The greatest acceleration on the graph is 4 m/s² .
"Acceleration" means how fast velocity is changing.
Changing velocity means changing speed OR direction.
This graph doesn't tell us anything about the direction of motion, so we can only work with speed.
The "greatest" acceleration means the biggest change of speed in the shortest time.
Your picture of the graph is pretty fuzzy, and I'm not sure I can actually read everything correctly.
The y-axis looks like it's velocity, and I THINK the numbers are 0, 20, 40, and 60, in meters per second.
The x-axis looks like time, and I THINK it's marked 0, 10, 20, 30, 40, 50, 60, 70, and 80, in seconds.
Now, each straight piece on the graph shows a change of velocity and a change of time. So the SLOPE of each piece is the acceleration of that piece.
==> On the first piece, from 0 to A, the velocity changes from 0 to 20 m/s, and the time changes from 0 to 20 sec. The slope of that piece is (20 m/s) / (20 sec), so the acceleration is 1 m/s² .
==> On the level piece from A to B, the velocity is 20 m/s. It doesn't change, from 20 to 30 sec. It has no slope, so the acceleration is zero.
==> On the piece from B to C, the velocity rises (60 - 20) = 40 m/s, and the time changes (40 - 30) = 10 sec. The slope is (40 m/s) / (10 sec), so the cceleration on that piece is 4 m/s² .
==> Finally, on the last piece, from C to D, the velocity DROPS from 60 to 0 m/s, during the time from 40 to 80 sec. The change in velocity is -60 m/s, and the change in time is 40 sec. So the slope of the piece, and the acceleration, is (-60 m/s) / (40 sec) = -1.5 m/s² .
The greatest acceleration shown on the graph happens along the line segment from B to C, from 30 to 40 seconds. During that time, the velocity changes from 20 to 60 m/s. That's an acceleration of 4 m/s² .
A rock is thrown straight up and reaches a height of 10m
How long was the rock in the air
What is the initial velocity of the rock
Answer:
1.41s,14.14m/s(approx.)
How do data collected from tree rings provide evidence for climate
change?
Why isn’t this a answer when you search it
Answer:
Climate scientists compare the tree growth records to local weather records. For locations where a good statistical match exists between tree growth and temperature or precipitation during the period of overlap, the ring widths can be used to estimate past temperature or precipitation over the lifetime of the tree.
0) Which of the following is matter?
a) Dust
b) The moon
c) Stand of hair
d) All of the above
Answer:
All of the above is the answer
hope it helps.
mark me as Brainliest plz!
Answer:
option d.
d) All of the above .
plsss helpp will give brainliest!!!
here are answer choices for ALL of the blanks! :)
-flexibility
-cardiovascular fitness
-muscular fitness
Answer:
1. Flexibility.
2. Muscular Fitness
3. Cardiovascular Fitness
4. Cardiovascular Fitness
5. Flexibility
6. Muscular Fitness
7. Cardiovascular Fitness
SOMEONE PLEASE HELP!A car starts at rest and accelerates at 4m/s2. How far has it traveled once its velocity reaches 25 m/s
Please find the attached photograph for your answer. Please do comment whether it helped you or not.
What is the advantage of SI unit over CGS unit?
ADVANTAGE
PEOPLE USED CERTAIN UNIT OF MEASUREMENT IN THEIR SPECIFIC REGION WHICH IS NOT ACCEPTED BY WORLD IN CGS SYSTEM.CGS UNIT MADE
DIFFICULTY IN TRADE. LATER SI UNIT OF MEASUREMENT HAVE BEEN ADOPTED IN 1960 AD TO BRING THE uniformity IN measurement throughout THE WORLD. SI SYSTEM MADE THE MEASURENT AROUND WORLD MORE EFFECTIVE AND LESS COFUSING THAN CGS UNIT.
what unit of measurement is used to measure the size of a star
A train is moving with the velocity of 10m/s . It attains an acceleration of 4m/s after 5 sec . find the distance covered by train at that time.
47) Which of the following types of energy is the kind that an object gains when it is raised to a higher point on a
hill than when it started?
A)
B)
Kinetic Energy
Chemical Energy
Mechanical Energy
Gravitational Potential Energy
Answer:
kinetic
Explanation:
kinetic energy is powered by motion or gravity the steeper the hill is the faster a ball will roll
write down the symbols of nitrogen and neon?
Answer:
Nitrogen is N, neon is Ne
Answer:
Symbol of Nitrogen is N symbol of Neon Ne.
potassium, Group 1
calcium, Group 2
iodine, Group 17
neon, Group 18
Which two elements in the list would bond together based on their ionic charges?
(1 point)
potassium and iodine
calcium and potassium
calcium and neon
potassium and neon
Answer:
Potassium and iodine
Explanation: I took the quick check
An experiment is conducted to determine how the arm length of a pendulum affects its period. The experimental design calls for varying the length of the arm and the mass of the bob.
Which is true about this experiment, based on good experimental design?
Only the arm length should be changed. The mass should remain the same.
Only the mass should be changed. The arm length should remain the same.
The force applied to the mass should be varied for each trial.
The material the arm is made of should be varied for each trial.
Answer:
Option (I)
Explanation:
The independent varible is arm length. Therefore, to eliminate the effect of other factors and make a valid and effective conclusion, only the arm length should be changed, while other factors (mass, force and materials) should remains the same.
Answer: Only the arm length should be changed. The mass should remain the same.
Explanation:
Bill and Amy want to ride their bikes from their neighborhood to school which is 14.4 kilometers away. It takes Amy 40 minutes to arrive at school. Bill arrives 20 minutes after Amy. How much faster (in meters/second) is Amy’s average speed for the entire trip?
Answer:
Hey mate....
Explanation:
This is ur answer....
The image attached is the answer....Hope it helps!
Brainliest pls!
Follow me! :)