Answer: 1m/s^2
Explanation: The formula to find acceleration is:
a = (vf - vi) / t
where:
a= acceleration
vf= final velocity
vi= intial velocity
t= time
By substituting these values in the acceleration equation, we obtain:
a = (9 m/s - 5 m/s) / 4 s
we get:
a = 1 m/s^2
an emf of 18.0 mv is induced in a 484-turn coil when the current is changing at the rate of 10.0 a/s. what is the magnetic flux through each turn of the coil at an instant when the current is 3.60 a? (enter the magnitude.)
The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.
The quantity of magnetic field traveling through a specific region or surface is measured by magnetic flux. It is described as the result of the area that the magnetic field travels through and its magnitude, where the area is perpendicular to the field's direction. The Weber is the magnetic flux SI unit (Wb)
Given that,
EMF = 18.0 mV = 0.018 V
N = 484 turns
(dΦ/dt) = 10.0 A/s
I = 3.60 A
The equation that relates the electromotive force (EMF) induced in a coil to the rate of change of magnetic flux is:
EMF = -N(dΦ/dt)
Rearranging the equation to solve for Φ:
Φ = -EMF/(N(d/dt))
= -(0.018 V)/(484(10.0 ))
= -3.72×10⁻⁶ Wb
The magnitude of the magnetic flux through each turn of the coil at the instant when the current is 3.60 A is 3.72×10⁻⁶ Wb.
To learn more about Magnetic flux, refer to:
https://brainly.com/question/29221352
#SPJ4
How does the direction of acceleration change when the masses on an Atwood's machine are switched, and how can this be explained using Newton's laws of motion?
The acceleration of the system still depends only on the difference in mass between the two masses, but the direction of the net force has changed, so the direction of acceleration has also changed.
When the masses are different, the system accelerates in the direction of the heavier mass. According to Newton's second law, the net force acting on each mass is equal to its mass times its acceleration:
F1 = m1a
F2 = m2a
where F1 and F2 are the tensions in the rope on either side of the pulley. Since the rope is inextensible and the pulley is ideal, the tension in the rope is the same on both sides, so F1 = F2 = T, where T is the tension in the rope.
Substituting T for F1 and F2 in the above equations and subtracting the second equation from the first, we get:
m1a - m2a = T - T
(m1 - m2)a = 0
Since the tension cancels out, the acceleration of the system depends only on the difference in mass between the two masses.
If the masses are switched, then the direction of the net force changes, and the system accelerates in the direction of the new heavier mass. The net force acting on each mass is still given by the above equations, but the masses are switched, so m1 is now the smaller mass, and m2 is the larger mass.
Substituting T for F1 and F2 in the above equations and subtracting the first equation from the second, we get:
m2a - m1a = T - T
(m2 - m1)a = 0
Since the tension cancels out, the acceleration of the system still depends only on the difference in mass between the two masses.
For such more question on acceleration:
https://brainly.com/question/460763
#SPJ11
when really small pieces and fibers of paper are mixed in with sand and need to be removed, which separation process would probably work best?
The sieving would work best when really small pieces and fibers of paper are mixed in with sand and need to be removed.
When really small pieces and fibers of paper are mixed in with sand and need to be removed, the separation process that would probably work best is sieving.What is sieving?Sieving is a physical separation process that separates solid particles based on their particle size.
This process can be used to separate a variety of materials, including powders, grains, and solids.Sieving is the process of separating materials based on their size.
A sieve is a device that consists of a mesh or net that is used to separate larger particles from smaller particles. When a mixture of particles is poured onto a sieve, the smaller particles fall through the mesh, while the larger particles remain on top of the mesh.
This process is used to remove impurities from a mixture and to separate materials with different particle sizes.
To learn more about : fibers
https://brainly.com/question/30614297
#SPJ11
for a converging lens with two curved surfaces, the radius of curvature for both surfaces is 10 cm. if the focal length is 10 cm, what must the index of refraction be?
The index of refraction must be 2, which is not physically possible, for a converging lens with two curved surfaces.
The central length of a combining focal point with two bended surfaces is given by the recipe 1/f = (n-1)[(1/R1) - (1/R2)], where f is the central length, n is the record of refraction, R1 and R2 are the radii of shape of the two surfaces. For this situation, the two surfaces have a span of shape of 10 cm, and the central length is likewise 10 cm. Accordingly, we can substitute these qualities into the equation and tackle for n:
1/10 = (n-1)[(1/10) - (1/10)]
n-1 = 1
n = 2
Hence, the record of refraction should be 2. It's quite significant that this worth isn't truly workable for a material to have, as the refractive file of any material should be more noteworthy than or equivalent to 1. Nonetheless, this outcome recommends that the focal point being referred to has an uncommon shape or material properties.
To learn more about converging lens, refer:
https://brainly.com/question/15563158
#SPJ4
a person having a mass of 80 kg sits on the edge of a horizontal rotating platform, 1.9 m from the center of the platform, and has a tangential speed of 6.0 m/s . calculate the angular momentum of the person.
Answer:
L = 912 kg*m^2/s
Explanation:
L = mvr
L = 80kg(6m/s)(1.9m)
L = 912
The angular momentum of the person is 912 kg⋅m²/s.
The angular momentum (L) of an object is given by the product of its moment of inertia (I) and its angular velocity (ω). The moment of inertia of a point mass rotating about an axis at a distance r from the center is given by I = mr², where m is the mass of the object.
In this case, the person is sitting on the edge of a rotating platform at a distance of 1.9 m from the center. Therefore, the moment of inertia of the person-platform system is I = mr² = 80 kg × (1.9 m)² = 288.8 kg⋅m².
The tangential speed (v) of the person is given as 6.0 m/s. The angular velocity (ω) can be calculated as ω = v/r, where r is the distance from the center. Therefore, ω = 6.0 m/s ÷ 1.9 m = 3.16 rad/s.
Now, we can calculate the angular momentum of the person as L = Iω = (288.8 kg⋅m²) × (3.16 rad/s) = 912 kg⋅m²/s.
To know more about angular momentum, refer here:
https://brainly.com/question/29563080#
#SPJ11
If a piece of COLD metal is dropped into a sample of LUKEWARM water, how will the temperature of the water change?
!See how COLD metal is capitalized!
The water molecules move less quickly because some of the energy from the water was used to accelerate the metal. The water's temperature drops as a result of this.
What occurs if you drop a hot piece of metal into cold water?The metal will eventually chill while the water warms up. The temperatures of the two items will eventually be equal. When this occurs, it is said that they are in thermal balance with one another.
What occurs if you add cold water to hot water?Because heat moves from higher temperature to lower temperature when hot water and frigid water are combined, the mixture reaches an intermediate temperature. when hot water is followed by frigid water.
To know more about accelerate visit:-
https://brainly.com/question/30660316
#SPJ1
) If you were on Mars where the gravitational constant is 3.71 m/s2, how far would a rock
dropped in Valles Marineris (a system of canyons on Mars up to 7,000 m deep) fall after
9 seconds?
Therefore, a rock dropped in Valles Marineris on Mars would fall approximately 150.255 meters after 9 seconds.
On Mars, what shaped the Valles Marineris?The majority of scientists concur that Valles Marineris is a sizable tectonic "crack" that formed in the Martian crust as the planet cooled, was influenced by the rising crust in the Tharsis area to the west, and then widened by erosional forces.
After 9 seconds, an object dumped on Mars would have travelled the distance indicated by the following formula:
d = 0.5 * g * t²
When we enter the specified numbers into the formula, we obtain:
d = 0.5 * 3.71 m/s² * (9 s)²
d = 0.5 * 3.71 m/s² * 81 s²
d = 150.255 m
To know more about Valles visit:-
https://brainly.com/question/30784398
#SPJ9
g the voltage across a capacitor is 12 volts. if its capacitance is 3 farads, how much charge (in coulombs) is stored in it?
The charge stored in the capacitor is 36 coulombs.
When the voltage across a capacitor is 12 volts and its capacitance is 3 farads, the amount of charge stored in it is 36 coulombs.
What is voltage?
The voltage is the electric potential difference between two points in a circuit, or it may be the driving force that causes current to flow. The charge q stored in a capacitor with a capacitance C when a voltage V is applied is given by: q = CV, where q is the charge stored in the capacitor, C is the capacitance of the capacitor, and V is the voltage applied to the capacitor. A 3-farad capacitor that is charged to 12 volts stores 36 coulombs of charge. Therefore, 36 coulombs of charge is stored in it.
To know more about voltage click here:
brainly.com/question/2364325
#SPJ11
a horizontal disk of radius 0.2m and mass 0.3kg is mounted on a central vertical axle so that a student can study the relationship between net torque and change in angular momentum of the disk. in the experiment, the student uses a force probe to collect data pertaining to the net torque exerted on the edge of the disk as a function of time, as shown in the graph. the disk is initially at rest. at what instant in time does the disk have the greatest angular momentum?
the disk has the greatest angular momentum at the end of the 2 seconds, when the net torque becomes constant.
To determine the instant in time when the disk has the greatest angular momentum, we need to use the relationship between torque and angular momentum:
τ = dL/dt
where τ is the net torque, L is the angular momentum, and t is time.
We can see from the graph that the net torque on the disk increases linearly with time for the first 2 seconds and then remains constant at 0.6 Nm. Since the disk is initially at rest, its initial angular momentum is zero.
During the first 2 seconds, the angular momentum of the disk increases as a result of the torque acting on it. We can integrate the torque over time to find the change in angular momentum:
ΔL = ∫τ dt = ∫(0.2t) dt = 0.1[tex]t^2[/tex]
So, at any time t during the first 2 seconds, the angular momentum of the disk is given by:
L = 0.1[tex]t^2[/tex]
The angular momentum of the disk will be greatest at the end of the 2 seconds, when the torque stops changing and reaches its constant value of 0.6 Nm. At this point, the angular momentum will be:
L = 0.1[tex](2)^2[/tex] = 0.4 kg [tex]m^2[/tex]/s
Learn more about angular momentum here:
https://brainly.com/question/29897173
#SPJ1
there have been baseball seasons in which so many home runs were hit that people began to suspect that something was wrong with the baseballs. what change in the baseballs would account for them traveling farther than normal?
Changes in the core, seams, or surface of a baseball could make it travel farther than normal, leading to suspicions of foul play. However, any alterations to baseballs are closely monitored and must be approved by Major League Baseball to ensure fairness in the game.
There are a few changes that could potentially lead to baseballs traveling farther than normal:
Changes in the baseball's core: The core of a baseball is made up of rubber and cork, and a change in the density of these materials could potentially make the ball travel farther.
Changes in the baseball's seams: The seams on a baseball can affect its flight path, and a change in the height, width, or thickness of the seams could affect the ball's trajectory and make it travel farther.
Changes in the baseball's surface: The surface of a baseball can affect its aerodynamics, and a change in the texture or smoothness of the surface could potentially make the ball travel farther.
It's worth noting that changes in the baseballs are closely monitored by Major League Baseball, and any alterations must be approved by the league before they can be used in games. If a change is suspected to be causing an increase in home runs, the league would investigate and take appropriate action to ensure that the game remains fair and balanced.
Learn more about Baseball :
https://brainly.com/question/29783871
#SPJ4
transformer a has a primary coil with 400 turns and a secondary coil with 200 turns. transformer b has a primary coil with 400 turns and a secondary coil with 800 turns. the same current and voltage are delivered to the primary coil of both transformers. the secondary coils are connected to identical circuits. how does the power delivered by secondary coil a compare to the power delivered by secondary coil b?
The power delivered by both secondary coils A and B is the same (P_A = P_B), the comparison shows that the power delivered by secondary coil A is equal to the power delivered by secondary coil B.
Transformer A has a primary coil with 400 turns and a secondary coil with 200 turns. Transformer B has a primary coil with 400 turns and a secondary coil with 800 turns. The same current and voltage are delivered to the primary coil of both transformers, and the secondary coils are connected to identical circuits.
Step 1: Calculate the turns ratio for each transformer.
Transformer A:
Turns ratio (N) =
[tex]= N_{secondary} / N_{primary[/tex]
= 200 turns / 400 turns
= 0.5
Transformer B:
Turns ratio (N)
= [tex]N_{secondary} / N_{primary[/tex]
= 800 turns / 400 turns
= 2
Step 2: Determine the voltage and current ratios.
For transformers, the voltage ratio (V) and the current ratio (I) are inversely proportional to the turns ratio.
Transformer A:
Voltage ratio (V_A)
[tex]= N_A = 0.5,[/tex]
Current ratio (I_A)
[tex]= 1 / N_A = 2[/tex]
Transformer B:
Voltage ratio (V_B)
[tex]= N_B = 2,[/tex]
Current ratio (I_B)
[tex]= 1 / N_B = 0.5[/tex]
Step 3: Calculate the power delivered by the secondary coils.
Power (P) = Voltage (V) × Current (I)
For Transformer A:
[tex]P_A = V_A \times I_A \\= 0.5 \times 2 = 1[/tex](relative value)
For Transformer B:
[tex]P_B = V_B \times I_B \\= 2 \times 0.5 = 1[/tex](relative value)
To learn more about Power :
https://brainly.com/question/1634438
#SPJ11
A submarine has a mass of 5 tonnes. State the buoyancy required for it to float stationary in the water
Answer: The buoyancy required for it to float stationary in the water is 49000
Explanation:
Describe how the location of the oxygen molecules will change after the divider swings open.
Find the freezing point of the material and contrast it to that of other metals. Measure the metal's length and contrast it with the lengths of other metals. Also, contrast the metal's shape with those of other metals.
Which of the following best describes how heat energy flows in the concentrated solar layout?The air within the solar cooker receives energy from the water through the edges of the cook pot. The air outside solar cooker receives energy that is transferred from the gas within the solar cooker through sidewalls of the solar cooker.
What kind of energy is transferred in a solar cooker?Radiation is utilized to bake the s'mores in the hot cooker that is created in this exercise. When heat is transported without the presence of Sun and s'mores were in close proximity to one another Electromagnetic waves that are passing through the air convey the heat.
To know more about Electromagnetic visit :
https://brainly.com/question/17057080
#SPJ9
what is the potential difference between yi =−7cm and yf =7cm in the uniform electric field e⃗ =(20,000i^−75,000j^)v/m?
The potential difference between the points at yi = -7cm and yf = 7cm in the given electric field is 1,050,000 V.
The electric field is given as E⃗ = (20,000i^ - 75,000j^) V/m. This means that the electric field is only in the y-direction, and its magnitude is constant throughout.
To find the potential difference between two points in the electric field, we can use the following formula:
ΔV = -∫E⃗ · dl⃗
where ΔV is the potential difference, E⃗ is the electric field, and dl⃗ is an infinitesimal displacement along the path between the two points. The negative sign arises because the electric field is acting in the opposite direction to the direction of motion along the path.
In this case, we can assume a path that moves from the point at yi = -7cm to the point at yf = 7cm, both of which lie on the y-axis. Since the electric field is only in the y-direction, we can assume that the path is also along the y-axis. Therefore, we can simplify the formula to:
ΔV = -∫E dy
where the integral is taken from yi = -7cm to yf = 7cm.
Substituting the electric field E⃗ and integrating, we get:
ΔV = -∫E dy = -∫(-75,000) dy (since the y-component of the electric field is -75,000 V/m)
ΔV = -[-75,000y]yi=-7cm to yf=7cm
ΔV = -[-75,000(7cm - (-7cm))] = 1,050,000 V
Therefore, the potential difference between the points at yi = -7cm and yf = 7cm in the given electric field is 1,050,000 V.
To learn more about potential difference here:
https://brainly.com/question/12198573
#SPJ11
A cyclist is travelling along a straight path at 5.5 m/s.
The cyclist accelerates uniformly to a speed of 11.0 m/s.
The acceleration of the cyclist is 1.2 m/s².
Calculate the distance travelled by the cyclist during this acceleration.
Give your answer correct to 2 significant figures.
Use the equation: v² - u² = 2 x a x X
Answer:
37.5 meters
Explanation:
We can use the equation:
v² - u² = 2ax
where v is the final velocity, u is the initial velocity, a is the acceleration, and x is the distance travelled during the acceleration.
We are given:
u = 5.5 m/s
v = 11.0 m/s
a = 1.2 m/s²
Substituting these values into the equation, we get:
11.0² - 5.5² = 2 × 1.2 × x
Simplifying the equation, we get:
120.25 - 30.25 = 2.4x
90 = 2.4x
x = 37.5 meters
Therefore, the distance traveled by the cyclist during the acceleration is 37.5 meters (to 2 significant figures).
. in terms of systems that can produce standing waves, what do we mean by: a. closed-closed? b. open-open? c. closed-open?
Standing waves can be produced in systems that have boundaries or endpoints that reflect or absorb waves. The nature of the boundary conditions determines the types of standing waves that can be produced.
a. Closed-closed: In a closed-closed system, both ends of the system are fixed and do not allow any displacement of the medium. This means that there is no flow of the medium at either end. An example of a closed-closed system is a string that is fixed at both ends.
b. Open-open: In an open-open system, both ends of the system are free to move, allowing the medium to flow in and out. This means that there is maximum displacement of the medium at both ends. An example of an open-open system is an air column that is open at both ends.
c. Closed-open: In a closed-open system, one end of the system is fixed and the other end is free to move, allowing the medium to flow in and out. This means that there is maximum displacement of the medium at the open end and no displacement at the closed end. An example of a closed-open system is a pipe that is closed at one end and open at the other.
Learn more about standing waves here:
https://brainly.com/question/14176146
#SPJ4
sirius, the brightest star in the night sky, is actually a binary star system. sirius a is main-sequence star and sirius b is a white dwarf. nearly all the visible light we see from sirius comes from sirius a. but when we photograph the system with x-ray light, as shown here, sirius b is the brighter of the two stars. why?
Sirius, the brightest star in the night sky, is actually a binary star system. Sirius A is a main-sequence star, and Sirius B is a white dwarf. Nearly all the visible light we see from Sirius comes from Sirius A. But when we photograph the system with X-ray light, as shown , Sirius B is the brighter of the two stars because As a white dwarf, Sirius B is much hotter than Sirius A and thus emits more X-rays.
Sirius is a binary star system made up of two stars called Sirius A and Sirius B. Sirius A is the larger and more massive star, while Sirius B is a smaller, denser, and hotter white dwarf. Sirius A is a main-sequence star, similar to our Sun, while Sirius B is the remnant of a star that has exhausted all of its nuclear fuel and has collapsed down to a dense core.
Although Sirius A is much brighter than Sirius B in visible light, as mentioned, Sirius B is actually the brighter of the two stars when observed in X-ray light. This is because as a white dwarf, Sirius B has a much smaller surface area than Sirius A, but is much hotter and therefore emits more energy per unit area.
The high temperature of Sirius B's surface causes it to emit a significant amount of X-ray radiation, which is why it appears brighter than Sirius A in X-ray images of the system.
For more such questions on Sirius, click on:
https://brainly.com/question/29503539
#SPJ11
The probable question may be:
sirius, the brightest star in the night sky, is actually a binary star system. sirius a is main-sequence star and sirius b is a white dwarf. nearly all the visible light we see from sirius comes from sirius a. but when we photograph the system with x-ray light, as shown here, sirius b is the brighter of the two stars. why?
in a ballistic pendulum experiment, projectile 1 results in a maximum height h of the pendulum equal to 2.6 cm. a second projectile (of the same mass) causes the pendulum to swing twice as high, . the second projectile was how many times faster than the first?
The second projectile was 2 times faster than the first projectile, as its initial velocity was twice that of the first projectile.
Let's assume that the first projectile had an initial velocity of v1, and the second projectile had an initial velocity of v2.
m1v1 = (m1 + m2)v2,
v1 = 2v2
This means that the initial velocity of the second projectile was twice that of the first projectile.
To find out the maximum height reached by the second projectile, we can use the conservation of energy:
1/2 m1 v2^2 = (m1 + m2)gh
h' = 2h = 5.2 cm
Substituting the values in the equation, we get:
1/2 m1 v2^2 = (m1 + m2)gh'
Simplifying, we get:
v2^2 = 2gh'
Substituting the values, we get:
v2^2 = 2 x 9.81 x 0.052
v2 = 0.725 m/s.
A projectile is an object that is propelled through the air and follows a curved trajectory under the influence of gravity. Examples of projectiles include bullets, cannonballs, and rockets. A projectile is typically launched with an initial velocity and then moves through the air under the influence of gravity alone.
The trajectory of a projectile is determined by its initial velocity, angle of launch, and the force of gravity. As the projectile travels through the air, it experiences a downward force due to gravity, which causes it to follow a curved path called a parabola. The maximum height of the projectile occurs at the apex of the parabolic path, where the vertical component of the velocity is zero.
To learn more about Projectile visit here:
brainly.com/question/11422992
#SPJ4
Which statement listed below is false?
OPTIONS
As thermal equilibrium is reached, the system has less ability to do work.
Heat is the transfer of thermal energy from one substance to another.
Thermal energy relates to both heat and temperature.
Thermal energy always flows from colder objects to warmer objects.
Energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.
"false", "thermal equilibrium", "Heat".Statement that is false from the options provided is:Thermal energy always flows from colder objects to warmer objects.What is thermal equilibrium?Thermal equilibrium is defined as the state of a system in which its temperature is uniform and unchanging over time. Heat is the transfer of thermal energy from one substance to another. Thermal energy relates to both heat and temperature, and as thermal equilibrium is reached, the system has less ability to do work.
Learn more about thermal equilibrium Energy here:
https://brainly.com/question/14132618
#SPJ4
in a single slit experiment, what effect on the first two minima in the diffraction pattern would result as the slit width is decreased?
In a single-slit experiment, when the slit width is decreased, the first two minima in the diffraction pattern will spread out and move further away from the central maximum.
In a single-slit experiment, when light passes through a narrow slit, it diffracts and creates a pattern of bright and dark fringes on a screen placed behind the slit. The location of the fringes depends on the wavelength of the light, the distance between the slit and the screen, and the width of the slit.
1. The single-slit experiment is based on the principle of diffraction, where light passing through a narrow slit creates an interference pattern.
2. The diffraction pattern consists of a central maximum surrounded by alternating bright and dark fringes, called maxima and minima, respectively.
3. The positions of the minima are determined by the relationship: a * sin(θ) = m * λ, where 'a' is the slit width, 'θ' is the angle between the central maximum and the minima, 'm' is the order of the minima (1, 2, 3, etc.), and 'λ' is the wavelength of the light.
4. As the slit width 'a' decreases, the value of sin(θ) must increase to maintain equality, which means the angle 'θ' increases as well.
5. With an increased angle 'θ', the first two minima in the diffraction pattern move further away from the central maximum, causing the pattern to spread out.
Therefore, as the slit width is decreased in a single-slit experiment, the distance between the first two minima in the diffraction pattern will increase.
To know more about diffraction patterns click here:
https://brainly.com/question/12290582
#SPJ11
1. for a classical wave, which of the following is true: a. frequency is proportional to velocity b. wavelength is proportional to frequency c. energy is proportional to the amplitude d. energy is proportional to wavelength
For a classical wave, the following statements are true: b,c and the statements a and d are false.
a. Frequency is proportional to velocity: This statement is not true. Frequency and velocity are independent properties of a wave. The frequency of a wave refers to the number of oscillations or cycles per unit time, while the velocity of a wave refers to the speed at which the wave propagates.
b. Wavelength is proportional to frequency: This statement is partially true. In a classical wave, the wavelength is inversely proportional to the frequency. This means that as the frequency increases, the wavelength decreases, and vice versa.
c. Energy is proportional to the amplitude: This statement is true. The amplitude of a wave refers to the maximum displacement of the wave from its equilibrium position. The energy of a wave is proportional to the square of its amplitude. This means that as the amplitude increases, the energy carried by the wave also increases.
d. Energy is proportional to wavelength: This statement is not true. The energy of a classical wave is proportional to its frequency, not its wavelength. This is expressed by the formula E = hf, where E is the energy of the wave, h is Planck's constant, and f is the frequency of the wave.
To learn more about classical wave here:
https://brainly.com/question/9695421
#SPJ11
A circular hoop of mass m, radius r, and infinitesimal thickness rolls without slipping down a ramp inclined at an angle θ with the horizontal. a. what is the acceleration αα of the center of the hoop? b. what is the minimum coefficient of (static) friction μminμmin needed for the hoop to roll without slipping?
The acceleration (α) of the center of the hoop: α = (mg * sin(θ)) / (2m) = (g * sin(θ)) / 2
The minimum coefficient of static friction (μmin) needed for the hoop to roll without slipping: μmin = α / (g * cos(θ)) = (g * sin(θ) / 2) / (g * cos(θ)) = tan(θ) / 2
The acceleration (α) of the center of the circular hoop can be determined by applying Newton's second law and the principle of conservation of angular momentum. Considering gravitational force (mg), normal force (N), and friction force (f) acting on the hoop, we can write:
mg * sin(θ) - f = m * α (1) (linear motion) and f * r = I * α/r (2) (angular motion)
For a hoop, the moment of inertia (I) is given by I = m * r^2. Substituting this into equation (2) and solving for f, we get:
f = m * α (3)
Now, substitute equation (3) into equation (1):
mg * sin(θ) - m * α = m * α
Rearranging the terms, we get the acceleration (α) of the center of the hoop:
α = (mg * sin(θ)) / (2m) = (g * sin(θ)) / 2
For the hoop to roll without slipping, the static friction (f) must be equal to the torque acting on the hoop. The minimum coefficient of static friction (μmin) can be determined using the frictional force equation:
f = μmin * N
Since the normal force (N) equals mg * cos(θ), the frictional force can be written as:
f = μmin * mg * cos(θ)
Now, substituting f = m * α from equation (3) into this equation, we get:
m * α = μmin * mg * cos(θ)
Rearranging the terms, we find the minimum coefficient of static friction (μmin) needed for the hoop to roll without slipping:
μmin = α / (g * cos(θ)) = (g * sin(θ) / 2) / (g * cos(θ)) = tan(θ) / 2
For more such questions on acceleration, click on:
https://brainly.com/question/30595126
#SPJ11
Show that the magnitudes of the train's accelerations after 10s and after 35s are in the ratio 2:1.
The formula Acceleration= 160401 from Physics with Charlie a (10) a (35) = 2 1. fraca(10)a(35)=frac21 is used to get the train's acceleration.
How much is the acceleration, exactly?Finally, we may say that acceleration is indeed a fundamental idea in physics that explains how things move. The rate at which an item changes either trajectory or velocity, or both, is referred to as its magnitude of acceleration. Using the equation a = (v - u) / t, one can easily determine the magnitude of acceleration.
What is the magnitude formula?|v| =(output + y2) is the formula to calculate a vector's magnitude in two dimensions (x, y). The Pythagorean theorem is the foundation of this formula.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ1
please help `\_('-')_/`
when the solar panel equipment arrives on site, which items need to be stored close to the work area because they will be installed first? select one: a. mounting hardware b. solar panels c. inverters d. batteries
When the solar panel equipment arrives on site, the mounting hardware needs to be stored close to the work area because it will be installed first. Therefore the correct option is option A.
Mounting hardware, such as brackets and rails, is used to secure the solar panels to the roof or ground, and it needs to be installed before the panels can be mounted.
Until the mounting hardware is completed, the solar panels, inverters, and batteries can be kept somewhere else.
The solar panels themselves, inverters, and batteries can be stored elsewhere until the mounting hardware is installed. Therefore the correct option is option A.
For such more question on equipment:
https://brainly.com/question/8310352
#SPJ11
what is the efficiency (in percent) of a subject on a treadmill who puts out work at the rate of 117 w while consuming oxygen at the rate of 2.12 l/min?
The efficiency of a subject on a treadmill can be calculated using the ratio of work output over work input. In this case, the work output is 117 W and the work input is 2.12 L/min of Oxygen.
The efficiency can be calculated as (117 W) / (2.12 L/min) * 100, which is approximately 55%. This means that 55% of the energy the subject is consuming is being used for work output and the remaining 45% is being used for other purposes such as heat loss or respiration. In other words, the subject is using 55% of their energy efficiently to produce work. In conclusion, the efficiency of the subject on a treadmill is 55%.
know more about Respiration here
https://brainly.com/question/18024346#
#SPJ11
1) Calculate the change in entropy (AS) for the following processes: a) Heating 0.5 kg of solid ice from -100°C to 0°C. b) Freezing 0.5 kg of solid ice at 0°C to liquid water at 0°C. c) Cooling 0.5 kg of liquid water from 100°C to 0°C. d) Vaporizing 0.5 kg of liquid water at 100°C to steam at 100°C. e) Which one of the two phase transitions (freezing or vaporizing) has the larger magnitude in the change of entropy? Explain in terms of the statistical model of entropy. f) For each process a)-d) does the entropy of the environment change? If so, does it increase or decrease? How do you know?
the change in entropy is: A- ΔS = Q/T = (105,000 J) / (273 K) = 384.6 J/K b- ΔS = -Q/T = (-166,750 J) / (273 K) = -611.2 J/K,c- ΔS = -Q/T = (-209,300 J) / (373 K) = -560.4 J/K, d)- ΔS = Q/T = (1,128,500 J) / (373 K) = 3023.5 J/K
a) To calculate the change in entropy when heating 0.5 kg of solid ice from -100°C to 0°C, we can use the equation:
ΔS = Q/T
where Q is the heat transferred to the system and T is the temperature at which the heat transfer occurs. Since the system is receiving heat, the sign of ΔS will be positive.
The heat required to raise the temperature of the ice from -100°C to 0°C can be calculated as:
Q = mcΔT
where m is the mass of the ice, c is the specific heat capacity of ice, and ΔT is the change in temperature.
Using the values given, we get:
Q = (0.5 kg) (2100 J/kg°C) (100°C) = 105,000 J
Therefore, the change in entropy is:
ΔS = Q/T = (105,000 J) / (273 K) = 384.6 J/K
b) Q = (0.5 kg) (333,500 J/kg) = 166,750 J
Therefore, the change in entropy is:
ΔS = -Q/T = (-166,750 J) / (273 K) = -611.2 J/K
c) Q = (0.5 kg) (4186 J/kg°C) (100°C) = 209,300 J
Therefore, the change in entropy is:
ΔS = -Q/T = (-209,300 J) / (373 K) = -560.4 J/K
d) Q = (0.5 kg) (2,257,000 J/kg) = 1,128,500 J
Therefore, the change in entropy is:
ΔS = Q/T = (1,128,500 J) / (373 K) = 3023.5 J/K
e) The change in entropy for vaporizing water (3023.5 J/K) is larger
To learn more about change in entropy here:
https://brainly.com/question/30691597
#SPJ11
a brand new american airlines boeing 787 is about to take off from rest on a calm day. the aircraft has a loaded mass of 251,000 kg. it has two engines, each of which provides 321 kn of thrust. the aircraft must achieve a minimum speed of 66.8 m/s to take off. what is the shortest length runway that will be needed for the aircraft to take off.
The shortest length of the runway that will be needed for the American Airlines Boeing 787 to take off is 902 meters.
To determine the shortest length runway needed for the American Airlines Boeing 787 to take off, we can use the formula for acceleration:
a = F_net / m
where a is the acceleration, F_net is the net force, and m is the mass of the aircraft.
We know that each engine provides 321 kN of thrust, and there are two engines, so the net force is:
F_net = 2 * 321 kN = 642 kN
We can convert this to Newtons:
F_net = 642,000 N
We also know the mass of the aircraft:
m = 251,000 kg
Substituting these values into the formula for acceleration, we get:
a = F_net / m = 642,000 N / 251,000 kg
= 2.56 m/s^2
To determine the minimum runway length needed, we can use the formula for distance:
d = (v_f^2 - v_i^2) / (2 * a)
where d is the distance, v_f is the final velocity (takeoff speed), and v_i is the initial velocity (zero).
Substituting the values we know, we get:
d = (66.8 m/s)^2 / (2 * 2.56 m/s^2)
= 902 meters
To learn more about Airlines Boeing
https://brainly.com/question/14956599
#SPJ4
building a supermassive black hole. the black hole in the galaxy m106 has a mass of about 36 million solar masses. let us assume that most of that mass flowed into the black hole through an accretion disk that radiated 10% of the mass-energy ( ) passing through it. in that case, what would be the total amount of energy radiated by the accretion disk during the history of the black hole? what would be the average luminosity of the accretion disk, if it continuously radiated that energy over a period of 10 billion years? how does that average luminosity compare with the luminosity of the milky way?
The total amount of energy radiated by the accretion disk during the history of the black hole is approximately 6.44 x 10^53 Joules. The average luminosity of the accretion disk is approximately 2.04 x 10^37 Watts.
The average luminosity of the accretion disk is slightly lower than the luminosity of the Milky Way.
To determine the total amount of energy radiated by the accretion disk during the history of the black hole, we can use the mass-energy equivalence formula, E=mc^2, where E is the energy, m is the mass, and c is the speed of light (approx. 3x10^8 m/s).
First, we find 10% of the black hole's mass: 0.1 x 36 million solar masses = 3.6 million solar masses. Then, we convert this mass to kilograms: 3.6 million solar masses x (1.989 x 10^30 kg/solar mass) ≈ 7.16 x 10^36 kg.
Next, we calculate the energy: E = (7.16 x 10^36 kg) x (3 x 10^8 m/s)^2 ≈ 6.44 x 10^53 Joules.
To find the average luminosity of the accretion disk, we divide the total energy by the time it radiated that energy: 6.44 x 10^53 Joules / (10 billion years x 3.1536 x 10^7 s/year) ≈ 2.04 x 10^37 Watts.
Comparing the average luminosity of the accretion disk to the luminosity of the Milky Way, which is around 3 x 10^37 Watts, we see that the average luminosity of the accretion disk is slightly lower than the luminosity of the Milky Way.
For more such questions on luminosity, click on:
https://brainly.com/question/6933301
#SPJ11
a coil has an inductance of 7.00 mh, and the current in it changes from 0.200 a to 1.50 a in a time interval of 0.150 s. find the magnitude of the average induced emf in the coil during this time interval.
A coil has an inductance of 7.00 mh, and the current in it changes from 0.200 a to 1.50 a in a time interval of 0.150 s. The magnitude of the average induced emf in the coil during this time interval is 0.72 V.
What is induced EMF, The induced EMF (electromotive force) is the voltage that is generated when a magnetic field passes through a conductor or is generated when a conductor moves through a magnetic field.
The formula for the magnitude of the average induced EMF in a coil is given by the following formula;
E = L (ΔI / Δt)
Where L is the inductance of the coil, ΔI is the change in current, and Δt is the time interval.
Substituting the given values,
L = 7.00 mH = 7.00 × 10-3 HΔI
= 1.50 A − 0.200 A
= 1.30 AΔt
= 0.150
sE = L (ΔI / Δt) = (7.00 × 10-3 H) (1.30 A / 0.150 s)E
= 0.072 V
therefore, The magnitude of the average induced EMF in the coil during this time interval is 0.72 V.
For more such questions on magnitude
brainly.com/question/17329842
#SPJ11