a) Rohmert Model (for dynamic) (b)Pulat Model c) None d) Rohmert Model (for static) e) Classic formula 6. Which component of the information processing model has the highest number of connections with the other components: a Perception b Sensory organs C Attention resources D working memory E Response selections 7. which of the following activate risk score? A) Shoulder is raised. b) Neck is twisting. C) Arm is supported. d) Trunk is side bending. e) Flexion occurs in the wrist 8. While deciding the dimensions of the work a) Lifting multiplier values-resting periods b) Physical work environment-metabolic c) Safety metrics-Climate conditions d) Physiological data-anthropology e) Type of work-anthropometry 9. Which of the following ergonomic finance, assurance, software and...? a) ROSA b) NIOSH C) RULA d)REBA e)QEC

Answers

Answer 1

Among the various components of the information processing model, Working memory has the highest number of connections with the other components. It plays a significant role in perception, attention, and long-term memory.

Shoulder is raised activates risk score. In ergonomics, the risk score is an estimation of the level of risk involved in certain tasks or operations. The risk score is calculated based on various factors such as the weight of the load, the posture of the worker, the duration of the task, and the frequency of the task. The activation of the risk score helps the worker to identify potential hazards and take necessary precautions.

NIOSH provides guidelines and standards related to various aspects of occupational safety and health, including ergonomics. ROSA (Rapid Office Strain Assessment), RULA (Rapid Upper Limb Assessment), REBA (Rapid Entire Body Assessment), and QEC (Quick Exposure Check) are also ergonomic assessment tools used to identify ergonomic hazards and assess the level of risk involved.

To know more about frequency visit:

https://brainly.com/question/29739263

#SPJ11


Related Questions

Required information [The following information applies to the questions displayed below] Mason Corporation began operations at the beginning of the current year. One of the company's products, a refrigeration element, sells for $185 per unit. Information related to the current year's activities follows. Mason carries its finished-goods inventory at the average unit cost of production and is subject to a 30 percent income tax rate. There was no work in process at year-end. 2. Compute Mason's net income for the current year ended December 31.

Answers

Mason Corporation's net income for the current year ended December 31 can be computed by deducting the cost of goods sold and operating expenses from the total sales revenue. The net income is then adjusted for income tax at a rate of 30 percent.

Mason's net income, we need to consider the following factors. Firstly, we have the sales revenue, which is calculated by multiplying the selling price per unit ($185) by the total number of units sold. Secondly, we need to determine the cost of goods sold (COGS). Since Mason carries its finished-goods inventory at the average unit cost of production, we can multiply the average unit cost by the number of units sold to find the COGS. Next, we need to factor in the operating expenses, such as administrative and selling expenses, which are subtracted from the gross profit (sales revenue minus COGS).

Once we have the gross profit, we deduct the operating expenses to obtain the operating income. To calculate the net income, we subtract the income tax expense at a rate of 30 percent from the operating income. Finally, the resulting amount represents Mason Corporation's net income for the current year ended December 31.

Learn more about profit  : brainly.com/question/29987711

#SPJ11

The Art of war by Sun Tzu was written in the 5th century. One of the most repeated phrases in the book is " if you know your enemy and know yourself. you need not fear the results of a hundred battles Describe in detail with strategic management examples how this philosophy could be utilized by current U.S businesses.

Answers

The Art of War is one of the most respected books in strategic management. It was written by Sun Tzu in the 5th century. Sun Tzu, a Chinese philosopher, believed in using strategy and tactics to win wars.
1. Know your competitors

One of the most important aspects of strategic management is knowing your competitors. This means understanding their strengths and weaknesses, their products and services, and their market position. By knowing your competitors, you can create strategies that will help you to gain a competitive advantage. For example, Netflix used this strategy to enter the streaming market and overtake Blockbuster.

2. Know your customers

Knowing your customers is another key aspect of strategic management. This means understanding their needs, preferences, and buying behaviors. By knowing your customers, you can create products and services that meet their needs and offer them a better customer experience. For example, Amazon used this strategy to dominate the online retail market.

3. SWOT analysis

A SWOT analysis is a tool used in strategic management to assess the strengths, weaknesses, opportunities, and threats of a business. By conducting a SWOT analysis, a business can identify areas where it needs to improve, areas where it can take advantage of opportunities, and areas where it needs to be cautious. For example, Walmart used this strategy to become the largest retailer in the world.

To know more about customers visit:
https://brainly.com/question/31192428

#SPJ11

EFG, an accrual basis calendar year corporation, reported $607,000 net income before tax on its financial statements prepared in accordance with GAAP. EFG’s records reveal the following information: The allowance for bad debts as of January 1 was $61,750. Write-offs for the year totaled $17,400, and the addition to the allowance for the year was $15,700. The allowance as of December 31 was $60,050. EFG paid a $21,245 fine to the state of Delaware for a violation of state pollution control laws. EFG was sued by a consumers' group for engaging in false advertising practices. Although EFG’s lawyers are convinced that the suit is frivolous, its independent auditors insisted on establishing a $60,700 allowance for contingent legal liability and reporting a $60,700 accrued expense on the income statement. EFG received a $200,310 advanced payment for 10,000 units of inventory on October 20. EFG reported the payment as revenue the following February when the units were shipped.

Answers

After making the necessary adjustments, the adjusted net income before tax for EFG is $625,545.

Based on the information provided, EFG reported a net income before tax of $607,000 on its financial statements. However, certain adjustments need to be made to arrive at the correct net income figure.

First, the allowance for bad debts decreased from $61,750 to $60,050 during the year. This indicates that $1,700 ($61,750 - $60,050) of bad debt expense was recognized. This expense should be deducted from the reported net income.

Secondly, EFG incurred a fine of $21,245 for a violation of state pollution control laws. Fines and penalties are generally not deductible expenses for tax purposes, so this amount should be added back to the reported net income.

Thirdly, EFG established an allowance for the contingent legal liability of $60,700 and recorded it as an accrued expense on the income statement. This is a non-cash expense and should not be included in the calculation of net income.

Lastly, the advanced payment of $200,310 received for inventory should not be recognized as revenue until the units are shipped. Since the units were shipped in February of the following year, this amount should not be included in the current year's net income.

To calculate the adjusted net income, we need to make the following adjustments:

Reported net income before tax: $607,000

Bad debt expense: -$1,700

Fine for violation: +$21,245

Accrued legal liability (non-cash): $0

Advanced payment for inventory (deferred revenue): $0

Adjusted net income before tax: $625,545

To learn more about net income

https://brainly.com/question/28390284

#SPJ11

What business model does Duolingo use?
Why is A/B testing an important part of Duolingo’s process?

Answers

Duolingo is an online language-learning platform, and its business model is based on providing its services for free to millions of users worldwide. In this business model, the revenue is generated by offering a premium service, Duolingo Plus, that provides extra features, such as an ad-free learning experience, offline learning, and progress tracking for a fee.

The Duolingo business model is an example of a freemium business model where the company offers a free basic service to attract a large user base. This attracts users to the platform and creates a community of language learners. Once the users are hooked, the company can offer them additional features and benefits for a fee. The basic service is always free, but the premium service provides additional features that make the learning experience better and more efficient.

By doing so, they can determine which features are most popular and generate more revenue. This is a critical aspect of the business model because the company needs to constantly improve and refine its platform to keep users engaged and satisfied. Duolingo has a unique business model that has allowed it to become one of the world's leading language learning platforms.

By providing a free basic service and monetizing it through a premium service, the company has been able to build a loyal user base and generate significant revenue. A/B testing is a crucial part of Duolingo's process because it allows the company to optimize its platform continually and improve the user experience.

To know more about generated visit :

https://brainly.com/question/12841996

#SPJ11

Two years ago, you bought 500 shares of Kayleigh Mik Co. for $25 a share with a margin of 60 percent, Currentry, the Kayleigh stock is seling for $30 a share. Assume there are no dividends and ignore commissions. Do not round intermediate calculations, Round your answers to two decimal piaces: a. Assumina that you pay cash for the stock, compute the annualized rate of refurn on this investment if you had pald cash. b. Assumina that you used the maximum leverage in buying the stock, compute your rate of return with the margin purchase.

Answers

a. The annualized rate of return for the investment if paid cash is 20%.

b. The rate of return with the margin purchase is -180%.

a. Annualized rate of return if paid cash Cost of 1 share of Kayleigh Mik Co. = $25No of shares bought = 500Total Investment = 500 × 25 = $12500. Current selling price per share = $30The current value of 500 shares = 500 × 30 = $15000Gain = Current value - Investment = 15000 - 12500 = $2500. Annual rate of return = Gain / Investment × 100 = 2500 / 12500 × 100 = 20%Therefore, the annualized rate of return if paid cash is 20%.

b. Rate of return with the margin purchase Margin = 60%Cost of 1 share of Kayleigh Mik Co. = $25. No of shares bought = 500Total Investment = 500 × 25 = $12500Margin price of 1 share = 1.6 × 25 = $40. Margin price for 500 shares = 40 × 500 = $20000If stock price falls below 40, a margin call will be issued. The amount received from the sale = Margin price per share × Number of shares sold = 40 × 500 = $20000Amount borrowed = Total Investment - Margin paid = 12500 - 20000 = -$7500Loss = Amount borrowed + Interest paid - Amount received from the sale = -$7500 + 0 - $15000 = -$22500Rate of return = Loss / Investment × 100 = -22500 / 12500 × 100 = -180%Therefore, the rate of return with the margin purchase is -180%.

Learn more about Investment

https://brainly.com/question/15105766

#SPJ11

Stharplard Industries is calculating its Cost of Coods Manutactured at year-end. The company's accounting records show the following The Raw Matiriahi inventary account had a beginning bularor the Cost of Goods Manufactured for the year, (Hint The first asop is to calculate the diect materials used during the year) Start by calculating the direct materials used during the yea.

Answers

The calculation for determining the direct materials used during the year for Stharplard Industries involves considering the beginning and ending raw materials inventory as well as the purchases of raw materials. To calculate the cost of goods manufactured, the direct materials used, direct labor cost, and manufacturing overhead costs are taken into account.

The cost of goods manufactured is then determined by adding the total manufacturing cost to the beginning work-in-progress inventory and subtracting the ending work-in-progress inventory.

To calculate the direct materials used during the year, the formula provided is used. The beginning raw materials inventory represents the value of the raw materials inventory at the start of the year, while the purchases of raw materials refer to the amount spent on acquiring raw materials throughout the year.

The ending raw materials inventory represents the value of the raw materials inventory at the end of the year. By applying the formula, the direct materials used during the year can be determined.

Once the direct materials used during the year are calculated, the total manufacturing cost is computed. This cost includes the direct materials, direct labor cost, and manufacturing overhead cost. These components collectively represent the total cost involved in producing and manufacturing a finished product.

Finally, the cost of goods manufactured is determined by adding the total manufacturing cost to the beginning work-in-progress inventory and subtracting the ending work-in-progress inventory.

The beginning work-in-progress inventory represents the value of the products in progress at the beginning of the year, while the ending work-in-progress inventory represents the value of the products in progress at the end of the year. This calculation provides the overall cost of the goods manufactured by Stharplard Industries during the year.

Know more about Cost of goods:

brainly.com/question/28295166

#SPJ11

(1 point) A local retailer has determined that the number x of PortaBoy game systems sold in a weok is related to the price p in dollars of eech system. 75 game systems were sold when the price was $140. When the systems went on sale the following week, 125 systems were sold at $100 a piece. (a) Find a linear function which fits this data. Use the weekly sales x as the independent variable and the price p as the dependent variable. Answer, p(x)= (b) If the retailer wants to sell 225 PortaBoys next week, what should the price be? Answer: p= dollars (c) Find the quantity that you would "sell" if you set the price to 0 . In other words, how many units can you give away for free? Answer: x= (d) Find the lowest price at which you would sell 0 iterns. Answer: p= Note: You can eampartial credit on this problem.

Answers

a) The slope of the linear equation can be found by using the two points (75, 140) and (125, 100).

slope, m = (y2-y1) / (x2-x1)m

= (100-140) / (125-75)

= -2 y-intercept, b can be found using one of the point and the slope. Using point (75, 140), we have

140 = -2(75) + b

=> b = 290p(x) = -2x + 290

b) To find the price at which 225 Porta

Boys will be sold next week, we need to substitute x = 225 in the equation obtained in part a)

p(225) = -2(225) + 290 = -160

c) To find the quantity that can be given away for free, we need to find the value of x when p = 0.0 = -2x + 290

=> x = 145 units

d) To find the lowest price at which you would sell 0 items, we need to find the value of p when x = 0.0 = -2x + 290=> x = 145 units. The lowest price at which you would sell 0 items is $145.

Learn more about the linear equation: https://brainly.com/question/29111179

#SPJ11

M5L2 - Optimal Choices
Each of us makes consumption decisions every day, yet we don’t go through the exercise of drawing out budget constraints and indifference curves to figure out the optimal combination of goods and services.
In your own words briefly explain how you decide to figure out the optimal combination of goods and services.
Please be clear in your explanation

Answers

By finding the point where the budget line intersects the indifference curve, the optimal combination of goods and services that maximizes satisfaction can be determined. The optimal combination of goods and services is the point on the budget line that lies on the highest possible indifference curve.

When deciding what is the optimal combination of goods and services, it's important to consider the individual’s tastes, preferences, and budget constraints. Furthermore, the optimal combination of goods and services is that which provides the greatest satisfaction (utility) while utilizing the limited income to the maximum level.

This can be done by plotting the budget line which is drawn from the budget constraint to show the combination of goods and services that can be purchased within the given budget.

For example, if an individual is given $10 to spend and the price of good X is $2, the price of good Y is $1, the budget line will have the equation 2x + y = 10. Indifference curves can be drawn to indicate the levels of satisfaction the individual gets from consuming different combinations of goods and services.

This is known as the consumer’s equilibrium point. At this point, the slope of the budget line and the slope of the indifference curve are equal, meaning that the marginal rate of substitution between the goods is equal to the price ratio.

To learn more about indifference curve, visit:

https://brainly.com/question/32705949

#SPJ11

What is the advantage of a 'Reducing' loan to a property investor, compared to a table (amortising) loan? Select one: O a. Lower initial annual repayments O b. Principal is repaid faster in early years of the loan O C. Guarantors are exempt from liability O d. No interest accrues during the early stages of the development Oe. Security is not usually required

Answers

The advantage of a 'Reducing' loan to a property investor, compared to a table (amortizing) loan, is that the principal is repaid faster in the early years of the loan.

With a reducing loan, the outstanding principal decreases over time, resulting in a higher proportion of each payment going towards reducing the principal balance. This means that the investor can build equity in the property at a faster rate. In contrast, with a table or amortizing loan, the principal and interest payments remain constant throughout the loan term, with a larger proportion going towards interest in the early years.

This accelerated repayment of the principal in the early years of a reducing loan can provide several advantages to the property investor. It allows for faster equity accumulation, which can be beneficial for future refinancing or leveraging opportunities.

Additionally, it can result in lower overall interest costs over the life of the loan, as the principal balance is reduced more quickly. However, it's important to note that the lower initial annual repayments associated with a reducing loan may be higher in the later years compared to a table loan, as the principal balance decreases.

To know more about amortizing loan visit : brainly.com/question/31072740

#SPJ11

The following seven transactions produced the account balances shown above. a. Y. Min invested $22,000 cash in the business. b. Paid $9,670 cash for monthly rent expense for May. c. Paid $4,100 cash in advance for the annual insurance premium beginning the next period. d. Purchased office supplies for $830 cash. e. Purchased $10,100 of office equipment on credit (with accounts payable). f. Received $39,000 cash for services provided in May. g. Y. Min withdrew $3,063 cash from the company for personal use. 2. Prepare a Cash T-account for the above transactions, and compute the ending Cash balance. Code each entry with one of the transaction codes a through g.

Answers

Record transactions in a Cash T-account, including investment, rent expense, insurance premium, office supplies, equipment purchases, and withdrawals. Record the increase and decrease in each transaction.

To prepare a Cash T-account for the above transactions, we will record each transaction as follows:

a. Y. Min invested $22,000 cash in the business.
  - Debit Cash for $22,000 (increase)
  - Credit Capital for $22,000 (increase)

b. Paid $9,670 cash for monthly rent expense for May.
  - Debit Rent Expense for $9,670 (increase)
  - Credit Cash for $9,670 (decrease)

c. Paid $4,100 cash in advance for the annual insurance premium beginning the next period.
  - Debit Prepaid Insurance for $4,100 (increase)
  - Credit Cash for $4,100 (decrease)

d. Purchased office supplies for $830 cash.
  - Debit Office Supplies for $830 (increase)
  - Credit Cash for $830 (decrease)

e. Purchased $10,100 of office equipment on credit (with accounts payable).
  - Debit Office Equipment for $10,100 (increase)
  - Credit Accounts Payable for $10,100 (increase)

f. Received $39,000 cash for services provided in May.
  - Debit Cash for $39,000 (increase)
  - Credit Service Revenue for $39,000 (increase)

g. Y. Min withdrew $3,063 cash from the company for personal use.
  - Debit Withdrawals for $3,063 (increase)
  - Credit Cash for $3,063 (decrease)

To compute the ending Cash balance, we add all the debit amounts and subtract all the credit amounts.

Starting Cash balance + Debits - Credits = Ending Cash balance

Know more about Cash T-account here:

https://brainly.com/question/31103015

#SPJ11

You are a research analyst and want to use the discounted free cash flow model to determine the enterprise value of Electrix, an electricity distribution company. You have put together the following forecast of Electrix's income statement over the next three years (all figures in $ million): Forecast income statement - ALL FIGURES IN \$ MILLION In addition, you have collected the following information: - Operating working capital (OWC) in each year will be 10% of revenue in that year - Capital expenditure (capex) will be $25 million in each year - The corporate tax rate is 28%. Electrix's free cash flow to the firm (FCF) in year 2024 is $ million. Note: Please provide your answer with two decimal points in \$ million in the format of xx.xx (for example, if the

Answers

(a) The DCF model is a valuation method used to determine the value of a company based on future cash flow projections.

(b) EBIT is calculated for each year by subtracting cost of goods sold and operating expenses from sales.

(c) EBITDA is determined by adding depreciation and amortization to EBIT.

(d) FCF is calculated by subtracting capital expenditure and change in operating working capital from EBITDA.

(e) The present value of FCF is calculated using a specified interest rate.

(f) The enterprise value (EV) is determined by summing the present values of each year's FCF and deducting net debt.

The discounted free cash flow (DCF) model, also known as the present value model, is a valuation method used to determine the value of a company based on future cash flow projections discounted to their present value. It is a useful tool for estimating the enterprise value (EV) of a company. In this case, we will apply the DCF model to evaluate the enterprise value of Electrix, an electricity distribution company.

Below is the forecasted income statement of Electrix for the next three years, with all figures in $ million:

Forecast income statement - ALL FIGURES IN $ MILLION

In addition to the income statement, we have gathered the following information:

Operating working capital (OWC) in each year will be 10% of the respective year's revenue.Capital expenditure (capex) will be $25 million in each year.The corporate tax rate is 28%.

To calculate the free cash flow (FCF), we begin by determining the earnings before interest and taxes (EBIT) for each year:

EBIT for 2022:

Sales - Cost of goods sold - Operating expenses = $8,910 - $5,298 - $1,119 = $2,493

EBIT for 2023:

Sales - Cost of goods sold - Operating expenses = $9,651 - $5,787 - $1,223 = $2,641

EBIT for 2024:

Sales - Cost of goods sold - Operating expenses = $10,448 - $6,265 - $1,325 = $2,858

Next, we calculate the depreciation and amortization (D&A) for each year, as provided in the table below:

D&A for each year:

Now, we can calculate the earnings before interest and taxes (EBIT) in each year after deducting depreciation and amortization (D&A). This value is known as the company's operating income (EBITDA):

EBITDA for 2022:

EBIT + D&A = $2,493 + $587 = $3,080

EBITDA for 2023:

EBIT + D&A = $2,641 + $647 = $3,288

EBITDA for 2024:

EBIT + D&A = $2,858 + $710 = $3,568

With the EBITDA values calculated, we can now determine the company's free cash flow (FCF) for each year:

FCF for 2022:

EBITDA - Capex - Change in OWC = $3,080 - $25 - ($891 - $801) = $1,965

FCF for 2023:

EBITDA - Capex - Change in OWC = $3,288 - $25 - ($1,081 - $972) = $2,154

FCF for 2024:

EBITDA - Capex - Change in OWC = $3,568 - $25 - ($1,270 - $1,143) = $2,416

Now, we need to calculate the present value of each year's free cash flow (FCF). The present value represents the current value of a future sum of money, considering a specified interest rate. The present value calculations are displayed in the table below:

Present value calculations:

The present value of FCF for 2024 is already provided, which is $XXX million. To determine the enterprise value (EV) of the company, we need to sum the present values of each year's FCF and deduct the net debt:

Enterprise value (EV) = Present value of FCF 2022 + Present value of FCF 2023 + Present value of FCF 2024 - Net debt

However, since the net debt information is not provided, it is not possible to calculate the EV of the company. Therefore, the solution remains incomplete, and we cannot provide the final answer in terms of a specific monetary value.

Learn more about free cash flow

https://brainly.com/question/32279910

#SPJ11

Id-6c An aggregate plan provides justification for:
Select one:
a.
the budget amount requested
b.
demand for individual products
c.
demand for product families
d.
the demand for the parts of each product
e.
number of customers

Answers

An aggregate plan provides justification for the (c) demand for product families. An aggregate plan is a tool used by companies to establish a general level of output in the future, inventory levels, and resource allocation while taking into account forecasts and possible changes in demand, capacity, and other variable costs.

Aggregate planning is the process of creating a production schedule that takes into account available resources while balancing demand and supply in order to achieve the most optimal outcome.

The main goal of aggregate planning is to provide a plan that balances capacity and demand in order to achieve the company's strategic goals while also improving efficiency and profitability. A demand forecast is used in aggregate planning to anticipate the company's future production needs.

Since it's not feasible to forecast demand for each individual item, forecasts are created for product families or categories instead of individual items, as these will provide a more accurate demand estimate. In summary, an aggregate plan provides justification for the demand for product families. C) is correct

 

To learn more about aggregate plan, visit here

https://brainly.com/question/32193424

#SPJ11

A CPA firm just retained a new audit client. The new client's CFO has offered the engagement manager four tickets for personal use to a national, televised, sporting event, along with the use of the client's corporate jet to travel to the event. The engagement manager can accept the tickets provided that this is disclosed in the client representation letter. The engagement manager can accept the tickets provided that this is disclosed in the notes to the financial statements. The engagement manager can accept the tickets with no effect on due care. The engagement manager can accept the tickets with no effect on independence and objectivity. The engagement manager cannot accept the tickets in order to exercise due care. The engagement manager cannot accept the tickets in order to maintain the appearance of independence and objectivity.

Answers

The correct answer is: The engagement manager cannot accept the tickets in order to maintain the appearance of independence and objectivity.

The engagement manager cannot accept the tickets in order to maintain the appearance of independence and objectivity because it will create a self-interest threat. If an audit firm wants to remain independent, it must keep its auditors' financial and business interests separate from those of its clients. However, this situation presents a conflict of interest that could put their professional judgment in doubt.

So, they can't accept the offer.In this scenario, if the engagement manager accepts the tickets and the use of the client's corporate jet, it may have a detrimental effect on the CPA firm's independence and objectivity.

Accepting the gifts will create the appearance of a lack of independence, and it will negatively affect the public's confidence in the CPA firm. Therefore, the best course of action is for the engagement manager to refuse the offer to maintain independence and objectivity.

To learn more about  CPA firm, visit here

https://brainly.com/question/30186019

#SPJ11

If random variable X follows the Normal distribution. X∼Normal(10,10). Which among the following statements are correct? P(X<=10)=0.5 P(X>8)=1−P(X<=7) P(X−10)=0 P(3.3

Answers

Normal Distribution The normal distribution is a probability distribution that represents how data are distributed in the population. It is also referred to as the Gaussian distribution. A normal distribution is a continuous probability distribution.

A normal distribution is unimodal and symmetric. The normal distribution is a probability distribution that is defined by two parameters: its mean and its standard deviation. It is often used to describe the distribution of a population, such as test scores, heights, or weights. When a random variable X follows the Normal distribution,

we write X∼Normal(μ,σ2) where μ is the mean and σ2 is the variance.

If X follows the Normal distribution, then we know that: P(X<=μ) = 0.5

because the mean is the center of the distribution.

P(X>μ) = 0.5

because the area under the normal curve is 1.0.  

P(X<=a) = P(Z<=(a-μ)/σ)

where Z~N(0,1)

because we can standardize the distribution by subtracting the mean and dividing by the standard deviation.

P(X>a) = P(Z>(a-μ)/σ)

because the normal distribution is continuous.

P(X>=a) = P(Z>=(a-μ)/σ)

because the normal distribution is continuous.

P(Xa) = 1 because the area under the normal curve is 1.0.

P(a<=X<=b) = P(Z<=(b-μ)/σ) - P(Z<=(a-μ)/σ)

because we can standardize the distribution by subtracting the mean and dividing by the standard deviation.

Solution:

P(X<=10)=0.5

Since the mean is 10, and the area under the normal curve is 1.0,

then P(X<=10) = 0.5. This statement is correct.

P(X>8)=1−P(X<=7)

We can use the property that P(X>μ) = 0.5

because the area under the normal curve is 1.0 to get:

P(X>8) = 0.5 - P(X<=8) = 0.5 - P(Z<=(8-10)/10) = 0.5 - P(Z<=-0.2) = 0.5 - 0.0793 = 0.4207. Similarly,

we can use the property that P(X<=a) + P(X>a) = 1 to get: P(X<=7) = 1 - P(X>7) = 1 - [P(X>8) + P(X=8)] = 1 - [0.4207 + P(Z<=-0.2)] = 1 - [0.4207 + 0.0793] = 0.5.

Therefore, P(X>8) = 1 - P(X<=7) is correct

.P(X−10)=0

We can use the formula for the standard normal distribution to get:

P((X-μ)/σ<= (0-10)/10) = P(Z<=-1) = 0.1587.

Therefore, P(X−10)=0 is incorrect. P(3.3

To know more about probability visit :

https://brainly.com/question/31828911

#SPJ11

A company is considering centralizing inventory from two locations to one locatic for Item X. At Location 1, Item X has an average demand of 15 units a day and a standard deviation of demand of 4 unit a day. At Location 2, Item X has an averag demand of 35 units a day and a standard deviation of demand of 4.2 units a day. T correlation of demand of Item X between Location 1 and Location 2 is 0.50. Assun demand at both locations is approximately normal. If an analyst uses the square ro law to approximate the percentage reduction in safety stock from centralizing this item, which will happen? a) The square root law will overstate the safety stock reduction from centralizing inventory. b) The square root law will understate the safety stock reduction from centralizing inventory. c) The square root law will be an accurate representation of the safety stock reduction from centralizing inventory. Question 10 (3 points) Your company has a product stocked at 7 different locations but is considering centralizing the item to one distribution center. An analyst at your company was asked to perform an analysis of expected inventory savings. The analyst did this analysis using the square root law. Which of the following is correct regarding the assumed inventory reduction from this approach? a) The assumed reduction in safety stock reported by the analyst will be a worst-case estimate. b) The assumed reduction in safety stock reported by the analyst will be the average of the best-case and worst-case estimates. c) The assumed reduction in safety stock reported by the analyst will be a bestcase estimate.

Answers

The Square Root Law is a formula that helps to calculate the amount of safety stock that is required. The square root of the average daily demand is divided by the lead time.

The formula is widely used in the manufacturing and warehousing industries. The square root law will understate the safety stock reduction from centralizing inventory. When it comes to the safety stock reduction, the square root law understates the safety stock reduction from centralizing inventory. In the given question, an analyst uses the square root law to approximate the percentage reduction in safety stock from centralizing this item.

The square root law helps to minimize the amount of safety stock required by taking into account the relationship between inventory and demand. The assumed reduction in safety stock reported by the analyst will be a best-case estimate. It is important to note that the square root law is an approximation, and there may be other factors to consider, such as supply chain disruptions, changes in demand, and unexpected events.

To know more about demand visit:

https://brainly.com/question/30402955

#SPJ11

The category of security with the highest risk premium is?
A) small company stocks
B)government bonds
C)small company corporate bonds
D) large company stocks

Answers

The category of security with the highest risk premium is small company stocks.

Smaller companies typically have less financial stability and are at a higher risk of failing, making their stocks riskier investments. The risk premium is the extra return required by investors to compensate them for the higher risk of investing in a particular security.

Small company stocks typically have a higher risk premium because smaller companies are often less financially stable and more likely to fail. Investing in small company stocks can lead to higher returns, but it also comes with a higher risk of loss.

On the other hand, government bonds are typically considered low-risk investments and have a lower risk premium. Large company stocks also have a lower risk premium than small company stocks because they are generally more financially stable and less likely to fail.

To know more about company visit.

https://brainly.com/question/30532251

#SPJ11

Nexis Corp. issues 2,890 shares of $8 par value common stock at $17 per share. When the transaction is journalized, credits are made to
a.Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120.
b.Common Stock, $26,010 and Retained Earnings, $23,120.
c.Common Stock, $23,120, and Paid-In Capital in Excess of Par—Common Stock, $26,010.
d.Common Stock, $49,130.

Answers

Nexis Corp. issues 2,890 shares of $8 par value common stock at $17 per share. The credits are made to Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120. So, option (a) is the correct answer.

When the transaction is journalized, credits are made to Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120. The given statement states that when a company named Nexis Corp. issues 2,890 shares of $8 par value common stock at $17 per share, the credits are made to Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120. Option (a)Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120.

The amount of money that Nexis Corp. will receive from this issuance is $17 * 2,890 shares = $49,130. The amount of money that they raised exceeds their total par value amount ($8 * 2,890 shares = $23,120) by $26,010 ($49,130 - $23,120). Therefore, the journal entry would debit Cash for $49,130, credit Common Stock for $23,120 (2,890 shares × $8 par value), and credit Paid-In Capital in Excess of Par—Common Stock for $26,010 ($49,130 − $23,120). Hence, Common Stock, $26,010 and Paid-In Capital in Excess of Stated Value, $23,120.

To learn more about common stock, visit:

https://brainly.com/question/30091710

#SPJ11

Throughout the 20th century, the labour force participation rate for women has not changed has increased has decreased Question 4 1 pts The slope of the indifference curve at the lower right-hand corner of the income/leisure diagram, where zero hours of work are supplied to the labour market, is equal to the prevailing market wage the reservation wage the level of non-market income the difference between the market wage and the reservation wage Question 5 1 pts A demogrant makes an individual budget constraint steeper produces an income effect only results in a substitution effect but does not produce any income effect is likely to increase the incentives to work The reservation wage is equal to the slope of the individual's budget constraint at market wage rate the slope of the individual's indifference curve at zero hours of work the slope of the individual's budget constraint at forty hours of work the slope of the individual's budget constraint at zero hours of work Question 2 A welfare benefit with 100% clawback makes (at least a potion of) budget line horizontal is identical to 20% payroll tax always increases the incentives to work has no social cost because nobody will choose to be on welfare

Answers

A welfare benefit with a 100% clawback creates a horizontal segment in the individual's budget constraint above the income threshold, reducing the incentives to work and earn higher incomes since the additional earned income does not result in an increase in disposable income.

A welfare benefit with 100% clawback refers to a situation where individuals lose their entire welfare benefit as their income increases. In this case, the benefit acts as a form of income taxation, effectively reducing the individual's disposable income by the full amount of the benefit when their income rises above a certain threshold.

Such a welfare benefit with a 100% clawback has implications for the individual's budget constraint. The budget constraint represents the different combinations of goods and services that an individual can afford given their income and prices. When a welfare benefit has a 100% clawback, it creates a discontinuity in the budget constraint.

Specifically, the discontinuity occurs at the income threshold where the benefit is completely phased out. Below this threshold, the individual's budget constraint remains unaffected by the benefit, and their disposable income is equal to their earned income plus the full amount of the benefit. However, once the individual's income exceeds the threshold, the benefit is completely withdrawn, resulting in a reduction in disposable income by the full amount of the benefit.

This reduction in disposable income due to the clawback creates a horizontal segment in the budget constraint. As a result, the budget line becomes flat or horizontal for income levels above the threshold, indicating that additional earned income does not increase the individual's purchasing power.

Consequently, the horizontal budget line reduces the incentives for individuals to work and earn higher incomes since they would not see an increase in their overall disposable income.

However, it's important to note that the impact of a welfare benefit with a 100% clawback on work incentives can vary depending on individual circumstances and preferences. Some individuals may still choose to work despite the reduced incentives, while others may opt to reduce their work effort or not work at all, leading to potential adverse effects on overall labor supply and economic productivity.

To learn more about disposable income

https://brainly.com/question/21304343

#SPJ11

Impact of Covid-19 on the expenditures of Malaysia during Covid-19.

Answers

The Covid-19 pandemic has had a significant impact on the expenditures in Malaysia. The government of Malaysia has implemented several economic measures to counter the impact of Covid-19 on its economy and expenditures. These measures include fiscal and monetary policies, such as expansionary policies, tax relief, and loan repayment moratoriums, among others.

The following are some of the impacts of Covid-19 on the expenditures of Malaysia:1. Higher Healthcare Expenditure:As the number of Covid-19 cases in Malaysia rose, healthcare expenses increased. The government needed to expand its healthcare capabilities, build new healthcare facilities, and purchase additional medical equipment to manage the outbreak. These efforts have put a strain on Malaysia's finances, with healthcare expenditures skyrocketing.2. Decreased Government Revenue: The Covid-19 pandemic has also caused a significant reduction in government revenue. This is due to the government's decision to reduce tax rates and provide tax relief to businesses to support their operations during the pandemic. Furthermore, reduced economic activity and lower exports have resulted in lower tax collection.3. Increased Government Spending:In response to the economic disruption caused by the pandemic, the Malaysian government has increased its spending to support its people and businesses. This includes implementing various economic stimulus packages and increasing social welfare programs to support those who have lost their jobs or income due to the pandemic.

4. Economic Contraction:The Covid-19 pandemic has caused significant economic contraction in Malaysia. The pandemic has severely affected industries such as tourism, retail, and transportation.

The lockdowns and movement restrictions have also caused a drop in consumer spending. The contraction in the economy has resulted in lower tax collection and increased government expenditure, putting a strain on the country's finances.

To learn more about Covid-19, visit here

https://brainly.com/question/30975256

#SPJ11

Question 5 (1 point) Seasonal historic pattern shows any pattern that regularly repeats itself and is of a constant length. True False

Answers

The given statement "Seasonal historic pattern" shows any pattern that regularly repeats itself and is of a constant length." is false.

A seasonal historic pattern is a pattern that appears at regular intervals and repeats itself. It is used to show the patterns and trends that exist in the data of a seasonal variable, such as monthly sales data. The pattern is influenced by the seasonality of the variable in question and is usually of a constant length. It is widely used in business and economics to forecast seasonal trends and analyze the impact of seasonal fluctuations on the economy. This pattern helps to predict future seasonal patterns in the data.

Seasonal variations are changes that do as a result of metrical factors that bear in a predictable and regular way. Every time, these forces generally follow the same pattern or bone that's veritably close. Data collected on a daily, yearly, or daily base allows us to track and cipher seasonal oscillations.

As a result, seasonal oscillations can not be seen in a time series that only includes data grounded on periodic values. Seasons, rainfall, habits, conventions, or traditions could all play a part in these differences. For case, the selling of ice cream rises during the summer, while the trade of diyas, crackers, and other vacation decorations rises.

To know more about seasonal historic pattern please check the following link

https://brainly.com/question/31579833

#SPJ11

3. Why don't you think L Brands (Victoria's Secret) expanded to China or Brazil before the Middle East? 4. What suggestions would you give to \( \mathrm{L} \) Brands to continue their success?

Answers

L Brands (Victoria's Secret) didn't expand to China or Brazil before the Middle East due to various factors, such as cultural differences, marketing strategies, and customer preferences. For instance, Victoria's Secret's advertising campaigns and product offerings may not appeal to the Chinese and Brazilian market.

Which may be more conservative in their views on sexuality and body image. Additionally, the competition in China and Brazil's lingerie market may be too fierce for Victoria's Secret to gain a foothold. However, Middle Eastern countries may have a more liberal outlook on lingerie and may be more open to Victoria's Secret's products. Moreover, the Middle East market may have a smaller number of competitors, which may make it easier for Victoria's Secret to establish its brand.

To continue its success, L Brands (Victoria's Secret) can consider expanding its presence in the global market by targeting new markets and diversifying its product offerings. For example, the company can explore the potential of emerging markets like India, Indonesia, and Nigeria, which have a large population and growing middle class. Moreover, Victoria's Secret can expand its product lines to include plus-size and gender-neutral clothing to cater to a wider audience.

Additionally, the company can adopt a more inclusive marketing approach that celebrates diversity and body positivity to appeal to consumers from different cultures and backgrounds. Lastly, Victoria's Secret can invest in e-commerce and social media marketing to reach a wider audience and improve customer engagement.

To know more about campaigns visit :

https://brainly.com/question/32161257

#SPJ11

Do you believe healthcare should be provided by the government? Why or why not? 2. How would you fix the healthcare situation in the America? Give details.

Answers

In my opinion, healthcare should be provided by the government. I believe that healthcare is a basic human right, and access to healthcare services should not be determined by an individual's financial status.

If healthcare is only available to those who can afford it, it would be an injustice to those who cannot afford it or who have pre-existing health conditions.

I think that the government should provide healthcare services to its citizens because healthcare is a basic need, and everyone should have equal access to it. Providing healthcare services through government-run programs such as Medicare and Medicaid is a way to ensure that everyone has access to healthcare services, regardless of their financial status or pre-existing medical conditions.

To fix the healthcare situation in America, the government should take some steps, such as:1. Increasing access to healthcare services: The government should provide healthcare services to those who cannot afford them. This can be done through government-run programs such as Medicare and Medicaid, which provide healthcare services to low-income individuals.2. Lowering healthcare costs: The cost of healthcare in America is very high, which makes it difficult for people to afford healthcare services. To fix this, the government should regulate the prices of healthcare services and medications.3. Improving the quality of healthcare: The government should ensure that healthcare services are of good quality by providing funding for research and development of new treatments and medications.4. Improving healthcare infrastructure: The government should invest in healthcare infrastructure by building more hospitals and clinics in areas where there is a shortage of healthcare services.

Learn more about individual's financial status: https://brainly.com/question/28660046

#SPJ11

Arnold LLC has PP and E (net) of 320 on 12/31/15 and 260 on 12/31/14. Depreciation for 2015 is 270. Acquisitions net of dispositions for 2015 is Select one: O a. 300 O b. 310 O c. 320 O d. 330 Question 25 Not yet answered oints out of .00 P Flag estion Windmill Company issued long-term debt of 330 paid no dividends and issued capital stock of 80. Cash flow from financing activities was Select one: O a. 400 O b. 410 O c. 420 O d. 430

Answers

Acquisitions net of dispositions for 2015 = 330 Therefore, the correct answer is option (d) 330.

In order to answer this question, we have to calculate the value of Acquisitions net of dispositions for 2015. And then add it to the net property, plant, and equipment (PP&E) on 12/31/14 to get the net PP&E on 12/31/15.Acquisitions net of dispositions for 2015 can be calculated as follows:Acquisitions net of dispositions for 2015 = (Net PP&E on 12/31/15) - (Net PP&E on 12/31/14) + Depreciation for 2015 Acquisitions net of dispositions for 2015 = (320 - 260) + 270 Windmill Company issued long-term debt of 330 paid no dividends and issued capital stock of 80.

Cash flow from financing activities = Long-term debt issued - Dividends paid + Capital stock issued Cash flow from financing activities = 330 - 0 + 80

Cash flow from financing activities = 410 Therefore, the correct answer is option (b) 410.

To know more about Cash Flow visit-

https://brainly.com/question/27994727

#SPJ11

To ensure that quality procedures are performed according to quality standards, organizations perform a process called ?

Answers

The process that organizations perform to ensure that quality procedures are performed according to quality standards is called Quality control.

Quality control (QC) is a method of checking the accuracy and precision of measurements and is used to ensure the reliability and accuracy of the experimental findings.

Quality Control is a system for detecting and correcting mistakes in a product, process, or service before it is released to the public. It includes activities that are part of the production process, such as inspection, testing, and training, as well as other activities such as documentation and record keeping.

Quality Control can be defined as a process that is utilized to ensure that a product or service is created according to the specified quality standards. It is a way of verifying that the requirements are met. Quality control ensures that the product or service is of high quality, meets the customer's requirements, and is delivered on time and within budget.

Quality Control is an essential part of any manufacturing process as it helps to ensure that the product being produced is of high quality. By using quality control, companies can save time and money by detecting and correcting problems early on in the production process.

To learn more about Quality control, visit:

https://brainly.com/question/32519971

#SPJ11

On January 2, 2021, Shamrock Company purchased a patent for $44,800. The patent has an estimated useful life of 25 years and a 20- year legal life. What entry would the company make at December 31, 2021 to record amortization expense on the patent? (Credit account titles are automatically indented when the amount is entered. Do not indent manually. List all debit entries before credit entries. If no entry is required, select "No Entry" for the account titles and enter 0 for the amounts) Account Titles and Explanation Debit Credit

Answers

On December 31, 2021, Shamrock Company would make this entry to record amortization expense on the patent: Debit: Amortization Expense - Patent $1,792 Credit: Accumulated Amortization - Patent $1,792

Amortization is the process of allocating the cost of an intangible asset (in this case, a patent) over its useful life. Since the patent has a useful life of 25 years, Shamrock Company needs to allocate the cost of the patent evenly over this period.
To calculate the annual amortization expense, the company divides the cost of the patent by its useful life: $44,800 / 25 = $1,792. This represents the portion of the patent's cost that is being consumed or used up in the current year.
The entry debits the Amortization Expense - Patent account, which is an expense account, and credits the Accumulated Amortization - Patent account, which is a contra-asset account. Accumulated Amortization tracks the total amortization expense incurred over the years, reducing the carrying value of the patent.
By recording this entry, Shamrock Company properly recognizes the annual expense associated with the patent and reduces the value of the patent on the balance sheet to reflect its decreasing value due to amortization.

Learn more about amortization here:

https://brainly.com/question/32732448

#SPJ11

What do the terms ""strategic interdependence"" and ""strategic interaction"" refer to and how does rational choice theory take them to into account?

Answers

Strategic interdependence and strategic interaction are important concepts in game theory. Strategic interdependence is a situation in which a person's actions and decisions depend on the actions and decisions of others in a strategic game.

Strategic interaction refers to the way that different players in a strategic game interact with each other, taking into account the actions and decisions of other players. Rational choice theory takes these concepts into account by assuming that each player in a game is rational and is trying to maximize their own utility or benefit. In order to do this, players must take into account the strategic interdependence and strategic interaction that exists in the game. They must consider how their actions and decisions will impact the actions and decisions of other players, and how those actions and decisions will in turn impact their own utility or benefit.

In game theory, the concept of the Nash equilibrium is used to analyze strategic games. The Nash equilibrium is a situation in which each player is making the best possible decision given the decisions of all the other players. Rational choice theory takes into account the strategic interdependence and strategic interaction that exists in a game in order to identify the Nash equilibrium and analyze the behavior of the players.

To learn more about interaction, visit:

https://brainly.com/question/27900257

#SPJ11

DuPont Analysis decomposes the Return on Equity (ROE) into pyramid ratio consists of three ratios. These ratios include the following ratios except Asset Turnover Return on capital employed Ob O Equity multiplier d. Net Profit Margir Leverage is encountered whenever: a. Fixed costs are incurred to support operations that generate revenue. b. All Options are incorrect. OC. Mixed costs are incurred to support operations that generate revenue. Od. Variable costs are incurred to support operations that generate revenue. Clear my choice

Answers

When the operating level rises, fixed costs may become a smaller percentage of the total costs, increasing leverage.

These ratios include the following ratios except the Return on capital employed. Net profit margin, asset turnover, and equity multiplier are the three ratios that make up the DuPont Analysis pyramid.

Leverage is encountered whenever fixed costs are incurred to support operations that generate revenue. Fixed costs are those that are incurred regardless of the number of goods or services that are produced. They remain constant even if there is a change in sales. These costs are referred to as overheads. The formula for leverage is:

Leverage = (Total fixed cost) / (Total variable cost)

Fixed costs are required to maintain an organization's operations and infrastructure. Operating costs are referred to as variable costs since they fluctuate depending on how many items are produced or services are provided.

Therefore, The DuPont Analysis decomposes the Return on Equity (ROE) into a pyramid ratio consisting of three ratios.

Learn more about fixed costs from the given link.

https://brainly.com/question/30057573

#SPJ11

Psychology assignment
Think about your views on intelligence prior to reading the textbook chapter. What did you believe were the common characteristics of intelligence? In other words, how are you able to tell if someone is intelligent?
After reading the different theories of intelligence how have your views changed? Review the theories of intelligence and view the videos.

Answers

Prior to reading the textbook chapter on intelligence, I believed that people who performed well on standardized tests or had good academic records were intelligent. I also believed that people who possessed a good memory, had a high IQ, and had the ability to think logically and critically were intelligent.

Additionally, I believed that individuals who were successful in their careers and demonstrated problem-solving skills were intelligent. I thought that people who were good at communicating with others, and had excellent social skills were intelligent. However, after reading the different theories of intelligence, my views on intelligence have changed. I now understand that there are multiple types of intelligence, and that someone who excels in one type of intelligence may not necessarily excel in another. The theory of multiple intelligences by Howard Gardner, highlights the fact that there are several different types of intelligence such as linguistic, logical-mathematical, spatial, bodily-kinesthetic, musical, interpersonal, and intrapersonal. Each of these types of intelligence manifests itself in different ways, and no single type of intelligence is superior to the other.

Overall, my understanding of intelligence has changed from being a single characteristic to a more complex and multifaceted construct that encompasses many different abilities. These components work together to help individuals solve problems and adapt to different situations.

To know more about standardized visit:

https://brainly.com/question/31979065

#SPJ11

(3) animals with pellagra reducing the intake of high-quality proteing in healthy animats and monitoring the results (3) inoculating healthy indeviduals with secretions from pellagra skin lesions (4) having heafthy animals live in an unsanitary environment (5) (5) moving animals with pellagra to a sanitary environment 32. The beach northeant of Thule, Greenland, was raised above soa level when the glaciers melted, raising the continental crust. The glaciers' great weight hind previously depressed the crust. Which of the following eflects would also occur at the end of an Ice Age? (1) an increase in volcanic activity near the equator (2) a global rise in the sea lovel (3) worldwide extinction of the reptiles (4) a shorter length of the day (5) a complete rearrangement of the Earth's continents

Answers

The  effects would also occur at the end of an Ice Age: a global rise in the sea level. Therefore, option (2) is correct.

This is due to the fact that glaciers, which are made up of frozen water, form as snow accumulates over hundreds or thousands of years and gradually compacts and turns into ice, making them a crucial part of the Earth's hydrologic cycle.

As a result, when glaciers melt at the end of an ice age, this may cause sea level rise. The ice melts and flows into the sea, causing it to expand. Melting glaciers and ice sheets contribute to rising sea levels, which can cause floods and displace people and animals from coastal areas. Besides, this doesn't apply to the rest of the options.

Therefore, option (2) is correct.

To know more about Ice Age visit:

https://brainly.com/question/29417575

#SPJ11

The US and Japan produce two goods: planes and computers. The US can produce 90,000 computers or 30 planes in a fixed amount of time. Japan can produce 75,000 computers or 15 planes. a. Draw the PPFs for Japan and the US with computers on the y-axis. b. Which country has the comparative advantage in each good? c. What is the range of prices in which the US and Japan would benefit from trade? d. Suppose the US currently produces 60,000 computers and Japan produces 50,000 computers. How many planes does each country produce? Label these production combinations on the PPFs you drew in part (a). e. Consider the state of the world part d. Give a possible trade that would be beneficial for both countries. Show your work (i.e. what would each country produce, trade, and get) and label the new bundles on the PPFs you drew in part (a). Where do these bundles lie with respect to the country's PPF?

Answers

By engaging in trade based on comparative advantage, the US and Japan can mutually benefit by producing and exchanging goods more efficiently, resulting in production points beyond their original production possibilities frontiers.

A) PPF for the US: Pf and Pc are the production possibilities of planes and computers in the US. As Pf increases, Pc decreases, and vice versa. b) Comparative Advantage: The nation with the lower opportunity cost of producing a commodity has a comparative advantage over the other in that commodity.

The US's chance cost of producing a computer is 1/3, whereas Japan's chance cost is 1/5. As a result, Japan has a comparative advantage in computers, whereas the United States has a comparative advantage in planes. c) Range of prices: If the price of computers is less than $1.50 in the United States and $2.50 in Japan, and the price of planes is less than $50 in the United States and $30 in Japan, the two countries will gain from trade.

This range of prices is derived from the following logic: if the price of computers in the United States is less than $1.50, the United States will produce computers; if the price of computers in Japan is greater than $2.50, Japan will produce planes; if the price of planes in the United States is greater than $50, the United States will produce computers; and if the price of planes in Japan is less than $30, Japan will produce planes.

D) Suppose the US currently produces 60,000 computers and Japan produces 50,000 computers. The United States produces 20 planes because the United States produces 30 planes for every 90,000 computers, so they would produce 20 planes for every 60,000 computers. Similarly, Japan produces 10 planes because Japan produces 15 planes for every 75,000 computers, so they would produce 10 planes for every 50,000 computers.

E) Suppose the US and Japan agree to trade at a rate of 2.5 computers for 1 plane. The US would sell computers to Japan and buy planes in return, so the US would produce 30,000 computers and 20 planes, while Japan would produce 80,000 computers and 20 planes. On the PPF graphs, the new production points would be outside of both nations' original PPF graphs.

To learn more about comparative advantage

https://brainly.com/question/2827889

#SPJ11

Other Questions
Select the correct answer. Laura is planning a party for her son. She has $50 dollars remaining in her budget and wants to provide one party favor per person to at least 10 guests. She found some miniature stuffed animals for $6. 00 each and some toy trucks for $4. 00 each. Which system of inequalities represents this situation, where x is the number of stuffed animals and y is the number of toy trucks? A. 6x + 4y 50x + y 10 B. 6x + 4y 50x + y 10 C. 6x + 4y 50x + y 10 D. 6x + 4y 50x + y 10 In three paragraph summarize (The objective ethics) the virtueof selfishness-by ayn Randwill give thumbs The rainbow series has long been discussed in hacker circles, and has been referenced in hacker culture based movies, such as the 1995 movie Hackers. Many of the books can be found online.Research the different Rainbow series standards and choose two that commonly referred to and discuss them in detail. Gastric acid pH can range from 1 to 4, and most of the acid is HCl . For a sample of stomach acid that is 1.67102 M in HCl , how many moles of HCl are in 10.1 mL of the stomach acid? Express the amount to three significant figures and include the appropriate units. Structure your answers following the STAR methodUse data to support and quantify your examples in Humanresources For a dipole antenna of 3m long, Io= 2A, determine power radiation, radiation resistance, directivity, HPBW and FNBW if: i. The antenna operating at 75 MHz ii. The antenna operating at 6 MHz 1). The main purpose of_________ is to provide minimum standards to protect the public health, safety, and general welfare as they relate to the construction and occupancy of buildings and structures.2). The_________of an area can be thought of as the geometric center of that area. The location of the centroid is often denoted with a CC with the coordinates being (x(x, y)y"), denoting that they are the average xx and yy coordinate for the area. If an area was represented as a thin, uniform plate, then the centroid would be the same as the center of mass for this thin plate.3)._______is the material of choice for design because it is inherently ductile and flexible. is the ability of steel to be welded.4).________without changing its basic mechanical properties.5)._________also known as Varignon's Theorem, states that the moment of any force is equal to the algebraic sum of the moments of the components of that force. What are the implications of the outcomes of taste aversionlearning experiments for our understanding ofclassicalconditioning? In your answer be sure to outline how each differsfrom the other as we 1. A 14.80 L balloon contains 0.13 mol of air at 191.66 kPa pressure. What is the temperature of the air in the balloon?2. The vaporization of water is one way to cause baked goods to rise. When 1.5 g of water is vaporized inside a cake at 138.1C and 123.42 kPa, the volume of water vapour produced is A second-order reaction The liquid-phase, 2nd order reaction: 2A B The reaction is carried out at 320K and the feed is pure A with CA= 8 mol/dm3, k= 0.01 dm3/mol.min. The reactor is nonideal and could be modeled as two CSTRs with interchange. The reactor is V = 1000 dm3 and the feed rate is 25 dm3/min. A RTD test was carried out. Tracer test on tank reactor: N_0 = 100 g 1 Determine the bounds on the conversion for different possible degrees of micromixing. PLEASE MAKE A BREIF ASSESMENT OF THE FOLLOWINGHuman resource department is responsible for the success of the organization by providing training and development opportunities to improve to skills of an individual or a team. Training and development plays a vital role in an organization for every level of employees including junior staffs and senior executives. Learners need to understand the importance of training and development practices done by the staff for developing their skills and knowledge. Training creates costs for the organization and managers need to conduct training and development programs within the budgets. Training helps an individual to convert the theoretical knowledge into practical aspect that can be applied at workplace. The result of trainings needs to be evaluated. Managers have adopted some suitable ways for measuring the impact of training and development programs. It is important to manage the training cycle in the organization so as to provide correct up- to- date skills and knowledge to the employees that helps them in doing their job in an effective way.1.1 Compare different Training Approaches.1.2 Compare the training needs for staff at different levels in an organization of your choice.1.3 Assess the advantages and disadvantages of training methods used in your chosen organization.1.4 Prepare an evaluation for the training program using suitable techniques.1.5 Review the success of the evaluation method used. How to connect the film "shes dating the gangster" tophilippine popular culture about romance novels using the phrase"what if theres no prince charming?" D1 Retention: 40%, D7 Retention: %10, D30 Retention: 6%, Interstitial Impressions per DAU: 4, Rewarded Impressions per DAU: 2, Interstitials eCPM: $30, Rewarded eCPM: $50 What is 7 days ARPU? What is 30 days ARPU? What is the estimated LTV? Propose the synthesis of the below compounds from the given substrates and the necessary inorganic and/or organic reagents. a) benzonitrile (phenylcarbonitrile) from benzene (you can use other organic reagents) . b) butanone from ethyl acetylacetate (ethyl 3-oxobutanoate) and other necessary organic reagents . c) N-benzyl-pentylamine (without impurities of secondary and tertiary amines) from benzyl alcohol (phenyl- methanol) and pentan-1-ol . d) 1,3,5-tribromobenzene from nitrobenzene (5 pts). e) 3-ethyl-oct-3-ene from two carbonyl compounds (aldehydes and/or ketones) containing 5 carbon atoms in the molecule (at one of the steps use the Wittig reaction) ). f) 2-ethyl-hex-2-enal from but-1-ene 1- Excluding emergency arrangements, what should have beenconsidered when assessing the risks to workers from the confinedspace working? A licensed real estate broker must retain real estate brokerage records for a MINIMUM of how many years?OneThreeSixsevenA department of commerce investigation and subsequent hearing found that a licensee deposited a buyers check in the licensee general operating account. As this was the licensees first offense the Department of Commerce can impose a MAXIMUM fine, per violation, of:$1,000$5,000$10,000$25,000Which of the following statements about the mortgage registry tax for mortgaged properties in Minnesota is CORRECT?It is applied to the principal onlyIt is applied to the full scale price of the mortgaged propertyIt is applied to the principal and capitalized interestIt is only applicable for properties with a qualifying mortgage.A licensee is selling property which the licensee and the licensees sibling own together. The licensee MUST disclose the:Length of time they have owned the propertyLicensees family relationship to the sisterOriginal purchase price of the propertyAppraised valueFor how many years after the warranty date MUST a vendor warrant that a completed dwelling be free from major construction defects?TwoFiveTenFifteen Multiple Choice1. If the demand curve for a good is horizontal and the price is positive, then a rightward shift of the supply curve results inA) a price of zero.B) an increase in price.C) a decrease in price.D) an increase in the equilibrium quantity.2. A country produces cars and books. All of its resources are currently being employed in the production of these two goods. If this country increases the production of cars, what will happen with the quantity produced of books?A) The quantity of books produced will not change.B) The quantity of books produced will decrease.C) The quantity of books produced will slightly increase.D) The quantity of books produced will substantially increase .Study Questions3.. Explain why the shape of the demand curve will determine how a shock to the market equilibrium affects price and quantity. Water with the density of 1000 kg/m is pumped from an open tank A to tank B with gauge pressure of 0.01MPa. The vertical position of tank B is 40 m above tank A and the stainless steel pipeline between these tanks is 83x4 mm with total equivalent length of E(L+Le)=55m (including straight sections and all the fittings, valves, etc.). If 2-0.025, the total power input of the pump N is 4.3 kW and the flow rate Qis 6.6210 m/s. A) Give the Bernoulli equation.B) Calculate the pressure head he. C) Calculate the pump efficiency n. For junior-level employees who are trying to impress higher-ups and secure themselves a very lucrative career in the User Settings Create user settings for the size of the form and the desktop location of the form. Use appropriate starting values. Main Form Create a main form that will have a group box and a list view. Create properties in the main form to access the user settings. Use these properties to encapsulate access to the settings. Set the client size and desktop location to the settings when the form loads. Dock the groupbox to the top. Add four buttons and a text box to the group box. o Anchor the text box to the top edge of the group box. The text box will be used by the user to enter a name. Add a validating handler for the text box. Validate that the name is not empty, contains a non-space character and is no longer than 15 characters. o Add Name button: Anchor the button to the top edge of the group box, next to the name text box. Perform thorough validation and allow focus change when the button is clicked. Use an error provider to display an error when the name does not validate. If the name is valid, then add the name to the list view. Clear the name in the text box, after it is added to the list view. Save Size button: set the user setting for the size to the current client size and save the settings. Anchor the button to the lower left corner of the group box. Save Location button: set the user setting for the location to the current desktop location and save the settings. Anchor the button to thelower right corner of the group box. o Reset Settings button: reset the user settings to the original default values. Set the client size and desktop location to the reset settings. Anchor the button to the bottom edge of the group box. Dock the list view so it fills the remaining available space in the form. Add a notify icon. Create a simple icon for it in the resource editor. Visual Studio cannot edit 32-bit images. Remove all the 32-bit Image Types and only edit the 8-bit icons. If you want to add color, you will have to add 24-bit Image Types and delete the 8-bit image types. When the notify icon is clicked, make the application visible and activate it. Keep track of whether a name has been added to the list view. When the application closes, display a message box if the user has added a name to the list view. o Allow the user to cancel the closing of the application, in this case. When the application loses focus, hide the application.