The absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times).
Justify your answer with mathematical equation or graphical illustration.
The absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times) can be justified by plotting a graph of the absorption rate of the material versus exposure time.
Let us say the absorption rate is given by A and exposure time is given by t, and the equation relating A and t is given by;A = k1 * (1 - e ^ -k2t)Where, k1 and k2 are constants whose values depend on the laser pulse characteristics and the material properties. e is the mathematical constant (approximately equal to 2.71828).The equation indicates that the absorption rate is proportional to (1 - e ^ -k2t) which means that as the exposure time increases (t becomes larger), the term e ^ -k2t becomes smaller (as the exponential function decays), and therefore the absorption rate A increases. Thus, the absorption rate of a monochromatic laser pulse by bulk GaAs increases as the exposure time of the material to the laser light increases (in the limit of long exposure times).
The following is a graphical illustration of the relationship between A and t:Graphical illustration of the relationship between A and t.
Learn more about absorption rate here:
brainly.com/question/30132814
#SPJ11
Required information A train, traveling at a constant speed of 22.0 ms. comes to an incline with a constant slope. While going up the incline, the train slows down with a constant acceleration of magnitude 1.40 m/s2 66 Sped How far has the train traveled up the incline after 6.60 s? m
The train has traveled up the incline for 176 m after 6.60 s, using the given data: Speed of train = 22.0 m/s, Constant acceleration = 1.40 m/s², Time = 6.60 s
Formula used: The formula used to calculate the distance covered by the train is given by: `d = vit + 1/2 at²`, where `v` is the initial velocity, `a` is the acceleration, `t` is the time taken and `d` is the distance covered.
Initial speed of the train, u = 22.0 m/s Acceleration of the train, a = 1.40 m/s²Time taken by the train, t = 6.60 s.
Using the formula, d = vit + 1/2 at²`d = 22.0 × 6.60 + 1/2 × 1.40 × (6.60)²``d = 145.2 + 1/2 × 1.40 × 43.56``d = 145.2 + 30.576`d = 175.776 ≈ 176 m
Learn more about acceleration:
https://brainly.com/question/460763
#SPJ11
Aone-gram sample of thorium ²²⁸Th contains 2.64 x 10²¹ atoms and undergoes a decay with a half-life of 1.913 yr (1.677 x 10⁴h).Each disintegration releases an energy of 5.52 MeV (8.83 x 10⁻¹³ J). Assuming that all of the energy is used to heat a 3.72-kg sample of water, find the change in temperature of the sample that occurs in one hour. Number i _____Units
one-gram sample of thorium ²²⁸Th contains 2.64 x 10²¹ atoms and undergoes a decay with a half-life of 1.913 yr (1.677 x 10⁴h).Each disintegration releases an energy of 5.52 MeV (8.83 x 10⁻¹³ J).
To find the change in temperature of the water sample, we need to calculate the total energy released by the decay of the thorium sample and then use it to calculate the change in temperature using the specific heat capacity of water.
Given:
Mass of thorium sample = 1 gNumber of thorium atoms = 2.64 x 10^21 atomsDecay energy per disintegration = 5.52 MeV = 5.52 x 10^-13 JHalf-life of thorium = 1.913 years = 1.677 x 10^4 hoursMass of water sample = 3.72 kgStep 1: Calculate the total energy released by the decay of the thorium sample.
To find the total energy, we need to multiply the energy released per disintegration by the number of disintegrations.
Total energy released = Energy per disintegration x Number of disintegrations
Total energy released = (5.52 x 10^-13 J) x (2.64 x 10^21)
Step 2: Convert the time period of one hour to seconds.
1 hour = 60 minutes x 60 seconds = 3600 seconds
Step 3: Calculate the change in temperature of the water sample.
The change in temperature can be calculated using the equation:
Change in temperature = Energy released / (mass of water x specific heat capacity of water)
Specific heat capacity of water = 4.18 J/g°C
First, we need to convert the mass of the water sample to grams.
Mass of water sample in grams = 3.72 kg x 1000 g/kg
Now, we can substitute the values into the equation:
Change in temperature = (Total energy released) / (Mass of water sample x Specific heat capacity of water)
Remember to convert the change in temperature to the desired units.
Let's calculate the change in temperature:
Total energy released = (5.52 x 10^-13 J) x (2.64 x 10^21)
Mass of water sample in grams = 3.72 kg x 1000 g/kg
Specific heat capacity of water = 4.18 J/g°C
Change in temperature = (Total energy released) / (Mass of water sample x Specific heat capacity of water)
Finally, convert the change in temperature to the desired units.
Change in temperature in 1 hour = (Change in temperature) x (3600 seconds / 1 hour) x (1 °C / 1 K)
To learn more about Half-life visit: https://brainly.com/question/1160651
#SPJ11
Suppose 435 mL of Ne gas at 21 °C and 1. 09 atm, and 456 mL of SF6 at 25 °C and 0. 89 atm are put into a 325 mL flask at 30. 2 °C (a) What will be the total pressure in the flask? (b) What is the mole fraction of for each of the gases in the flask?
(a) To determine the total pressure in the flask, we need to consider the partial pressures of each gas present and add them together.
Using the ideal gas law, we can calculate the partial pressure of each gas:
PV = nRT
For Ne gas:
P₁V₁ = n₁RT
P₁ = (n₁/V₁)RT
For SF6 gas:
P₂V₂ = n₂RT
P₂ = (n₂/V₂)RT
To find the total pressure, we add the partial pressures:
P_total = P₁ + P₂
(b) The mole fraction (χ) of each gas can be calculated using the formula:
χ = moles of gas / total moles of gas
To find the moles of each gas, we use the ideal gas law rearranged:
n = PV / RT
Now, let's calculate the values.
Given:
Volume of Ne gas (V₁) = 435 mL = 0.435 L
Temperature of Ne gas (T₁) = 21 °C = 294 K
Pressure of Ne gas (P₁) = 1.09 atm
Volume of SF6 gas (V₂) = 456 mL = 0.456 L
Temperature of SF6 gas (T₂) = 25 °C = 298 K
Pressure of SF6 gas (P₂) = 0.89 atm
Volume of flask (V_total) = 325 mL = 0.325 L
Temperature of flask (T_total) = 30.2 °C = 303.2 K
Gas constant (R) = 0.0821 L·atm/(K·mol)
(a) To calculate the total pressure:
P₁ = (n₁/V₁)RT₁
P₁ = (PV₁/RT₁)
P₂ = (n₂/V₂)RT₂
P₂ = (PV₂/RT₂)
P_total = P₁ + P₂
(b) To calculate the mole fraction:
n₁ = P₁V_total / RT_total
n₂ = P₂V_total / RT_total
χ₁ = n₁ / (n₁ + n₂)
χ₂ = n₂ / (n₁ + n₂)
By plugging in the given values and performing the calculations, we can find the total pressure in the flask and the mole fraction of each gas.
Learn more about pressure here:-
brainly.com/question/30351725
#SPJ11
Pls answer this question
Answer:
3
Explanation:im almost certain thats what it is
A charged rod is placed on the x-axis as shown in the figure. If the charge Q=-1.0 nC is distributed uniformly the rod, what is the electric potential at the origin (in Volt)? [1nC= 102C] XA dq a) -0.83 V=KS- Q b) +83.2 X c) -83.2
The charge Q=-1.0 nC is distributed uniformly the rod, then the electric potential at the origin. Therefore, the electric potential at the origin is 1.56 V. Hence, option A is correct.
Given that a charged rod is placed on the x-axis and its charge Q is -1.0 nC, which is distributed uniformly. We need to find out the electric potential at the origin. Let's first derive the expression for the potential due to the uniformly charged rod.
Potential at a point on the x-axis due to uniformly charged rod. Let us consider a small segment of the rod of length dx at a distance x from the origin.
The charge on this small segment can be written as, dq=λdx
where λ is the linear charge density of the rod.
λ = Q/L where L is the length of the rod.
Here Q= -1.0 nC = -1.0 × 10⁻⁹C.
The length of the rod is not given in the question.
Therefore, we consider the length of the rod as 1 meter.
Then, λ = -1.0 × 10⁻⁹C/m.
Putting the value of λ in dq, dq=λdx=-1.0 × 10⁻⁹ dx C
We know that the electric potential due to a point charge q at a distance r from it is given as,
V= 1/4πε₀ q/r
where ε₀ is the permittivity of free space which is equal to 8.85 × 10⁻¹² C²/Nm².
Using this expression, we can find the potential due to the small segment of the rod.
The potential due to a small segment of length dx at a distance x from the origin is,dV= 1/4πε₀ dq/x = (k dq)/xwhere k = 1/4πε₀
The total potential due to the entire rod is given by integrating this expression from x = -L/2 to x = L/2.
Here L is the length of the rod. L is considered as 1 meter as explained above.
Therefore, L/2 = 0.5m.
The total potential due to the entire rod is, V = ∫(k dq)/x = k ∫dq/x = k ∫_{-0.5}^{0.5} (-1.0 × 10⁻⁹dx)/x= - k (-1.0 × 10⁻⁹) ln|x| from x=-0.5 to x=0.5= k (-1.0 × 10⁻⁹) ln(0.5/-0.5) (ln of a negative number is undefined)Here k=1/(4πε₀) = 9 × 10⁹ Nm²/C².
Therefore, the potential at the origin is, V= - k (-1.0 × 10⁻⁹) ln(0.5/-0.5)= 2.25 × 10⁹ ln2 = 2.25 × 10⁹ × 0.693 = 1.56 V
Therefore, the electric potential at the origin is 1.56 V. Hence, option A is correct.
Learn more about electric potential here:
https://brainly.com/question/31173598
#SPJ11
A volleyball with a man of 0.200 kg approaches a player horizontally with a speed of 10.0 m/s. The player strikes the ball with her hand, which comes the ball to move in the opposite direction with a speed of 1.3 m/s ( What magnitude of impulsa (in kg min delivered to the ball by the buyer m/s (b) What is the direction of the impulse delivered to the ball by the player In the same direction as the ball's initial velocity Perpendicular to the ball's initial velocity Opposite to the ball's initial velocity The magnitude is zero. (c) If the player's hand is in contact with the ball for 0.0600 , what is the magnitude of the average force (In N) exerted on the player's hand by the ball? N
(a) the magnitude of the impulse delivered to the ball by the player is 1.34 kg m/s
(b) the answer is opposite to the ball's initial velocity.
(c) the magnitude of the average force exerted on the player's hand by the ball is 558.6 N. The direction of the force is opposite to the ball's initial velocity. Hence, the answer is opposite to the ball's initial velocity.
Given data:
Mass of man = m = 0.200 kg
Initial velocity of ball = u = 10.0 m/s
Final velocity of ball = v = 1.3 m/s
Time taken to strike the ball = t = 0.0600 s
(a) Impulse is defined as the product of force and time. The impulse momentum theorem states that the change in momentum of a body is equal to the impulse applied to it.
The initial momentum of the ball is m × u
Final momentum of the ball is m × v
Change in momentum of the ball = Final momentum - Initial momentum
= m × v - m × u
= m(v - u)
Now, Impulse = Change in momentum
= m(v - u)
= 0.200(1.3 - 10.0)
≈ -1.340 kg m/s
(b) As the final velocity of the ball is in opposite direction to the initial velocity, the direction of the impulse delivered to the ball by the player is in the opposite direction to the ball's initial velocity.
(c) Force is defined as the rate of change of momentum. Force = change in momentum / time
F = (mv - mu) / t
F = m(v - u) / t
F = 0.200 (1.3 - 10.0) / 0.0600
F ≈ -558.6 N
To learn more about magnitude, refer:-
https://brainly.com/question/31022175
#SPJ11
If a projectile is launched downwards, the value of v0y is: A. Zero B. Positive C. Negative
D. Cannot be determined from the problem.
When a projectile is launched downwards, the value of v0y is negative.
Let's define the variables: vy = vertical component of velocity.
v0y = initial vertical component of velocity. a = acceleration (due to gravity) = -9.8 m/s²
When a projectile is launched downwards, it means the angle of projection is downwards. The vertical component of velocity (v0y) will be negative. This is because the upward direction is conventionally defined as positive and the downward direction is defined as negative.
v0y = -|v0|sinθ
Here, θ is the angle of projection and |v0| is the initial velocity of the projectile. Since the angle of projection is downwards, sinθ is negative.
Therefore, v0y is negative. So the correct option is C. Negative.
Learn more about projectile: https://brainly.com/question/8104921
#SPJ11
a hockey puck is set in motion across a frozen pond . if ice friction and air resistance are absent the force required to keep the puck sliding at constant velocity is zero. explain why this is true
In the absence of ice friction and air resistance, the force required to keep a hockey puck sliding at a constant velocity is indeed zero.
This can be explained by Newton's first law of motion, also known as the law of inertia.
Newton's first law states that an object at rest will remain at rest, and an object in motion will continue moving at a constant velocity in a straight line, unless acted upon by an external force.
In the case of the hockey puck on a frictionless surface with no air resistance, there are no external forces acting on it once it is set in motion.
Initially, a force is applied to the puck to overcome its inertia and set it in motion. Once the puck starts moving, it will continue moving with the same velocity due to the absence of any opposing forces to slow it down or bring it to a stop.
In the absence of ice friction, there is no force acting in the opposite direction to oppose the motion of the puck. Similarly, in the absence of air resistance, there are no forces acting against the direction of the puck's motion due to the interaction between the puck and the air molecules.
Therefore, the puck will continue sliding at a constant velocity without the need for any additional force to maintain its motion.
To learn more about Newton's first law of motion visit:
brainly.com/question/29775827
#SPJ11
The spectrum of light from a star is, to a good approximation, a blackbody spectrum. The red supergiant star Betelgeuse has ⋀max = 760 nm. (Note that this is actually in the infrared portion of the spectrum.) When light from Betelgeuse reaches the earth, the measured intensity at the earth is 2.9 X 10-8 W/m2. Betelgeuse is located 490 light years from earth. (a) Find the temperature of Betelgeuse. (b) Find the intensity of light emitted by Betelgeuse. (Hint: Remember that this and the measured intensity at the earth are related by an inverse square law.) (b) Find the radius of Betelgeuse. (Assume it is spherical.)
The temperature of Betelgeuse is 262,124.5 K. The intensity of light emitted by Betelgeuse is 6.95 × 10¹² W/m². The radius of Betelgeuse is 9.53 × 10¹² m.
Given below are the terms that are used in the problem -
The temperature of Betelgeuse: Let’s assume that Betelgeuse radiates as a black body. So we can use the Wein’s law here. λmaxT = 2.898×10−3 mK⋅ So, T = λmax/T = (760 × 10⁻⁹)/2.898×10−3 = 262,124.5 K(b),
Find the intensity of light emitted by Betelgeuse: As we know the measured intensity at the earth is 2.9 × 10⁻⁸ W/m² and Betelgeuse is located 490 light-years from earth. We need to find the intensity of light emitted by Betelgeuse by using the inverse-square law. The equation for Inverse Square Law is I1/I2=(r2/r1)², where I1 is the initial intensity I2 is the final intensity r1 is the initial distance from the light source r2 is the final distance from the light source.
So, I2 = (r1/r2)²I2 = (490 × 9.461 × 10¹²)² × 2.9 × 10⁻⁸I2 = 6.95 × 10¹² W/m²
The radius of Betelgeuse: Using the Stefan Boltzmann Law which is
P = σAT⁴,
where
P is power
A is surface area
T is temperature
σ is Stefan-Boltzmann constant
σ=5.67×10−8W/m²·K⁴
P = 4πR²σT⁴R² = P/(4πσT⁴) = (4 × 10³W)/(4π × 5.67×10⁻⁸ W/m²·K⁴ × (262,124.5 K)⁴)
R² = 9.09 × 10²⁶m²
So, the radius of Betelgeuse is R = √(9.09 × 10²⁶) = 9.53 × 10¹² m.
To know more about Wein’s law
https://brainly.com/question/31647689
#SPJ11
How far apart (m) will two charges, each of magnitude 15 μC, be a force of 0.88 N on each other? Give your answer to two decimal places.
The two charges under a force of 0.88 N will be 2.36 meters apart.
Two charges are given as Q1 = Q2 = 15 μC each.
The force acting between the charges is F = 0.88 N.
The electric force between two point charges is given by Coulomb’s Law:
F = (1/4πε) * (Q1Q2)/r² Where ε is the permittivity of free space and r is the distance between two charges.
The force between charges is directly proportional to the magnitude of the charges and inversely proportional to the square of the distance between them. We need to calculate the distance between two charges. Using Coulomb’s law, we can find the distance:
r = √(Q1Q2/ F * 4πε)
The value of ε is 8.85 x 10^-12 C²/Nm²
Substitute the given values
:r = √(15 μC × 15 μC / 0.88 N * 4π × 8.85 × 10^-12 C²/Nm²)
r = 2.36 meters (approx)
Therefore, the two charges will be 2.36 meters apart.
Learn more about force acting between the charges https://brainly.com/question/14696750
#SPJ11
The magnetic field of the earth at a certain location is directed vertically downward and has a magnitude of 50.0 µT. A proton is moving horizontally toward the west in this field with a speed of 6.80 106 m/s. What are the direction and magnitude of the magnetic force the field exerts on the proton?
The magnetic field of the earth at a certain location is directed vertically downward and has a magnitude of 50.0 µT. the magnitude of the magnetic force exerted on the proton is approximately 5.44 x 10^(-14) Newtons.
The magnetic force experienced by a charged particle moving in a magnetic field is given by the formula:
F = q * v * B * sin(theta)
where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field strength, and theta is the angle between the velocity vector and the magnetic field vector.
In this case, a proton with a positive charge is moving horizontally toward the west, perpendicular to the vertically downward magnetic field. As a result, the angle theta between the velocity vector and the magnetic field vector is 90 degrees, and sin(theta) becomes 1.
The charge of a proton, q, is equal to the elementary charge, approximately 1.6 x 10^(-19) Coulombs.
Plugging in the values:
F = (1.6 x 10^(-19) C) * (6.80 x 10^6 m/s) * (50.0 x 10^(-6) T) * 1
F ≈ 5.44 x 10^(-14) N
Therefore, the magnitude of the magnetic force exerted on the proton is approximately 5.44 x 10^(-14) Newtons.
Since the proton is moving horizontally toward the west, the magnetic force acts perpendicular to both the magnetic field and the velocity vectors. Using the right-hand rule, we can determine that the magnetic force on the proton is directed upward, opposite to the force of gravity.
Learn more about magnetic field here:
https://brainly.com/question/7645789
#SPJ11
Is an asteroid orbiting the Sun with a velocity of 585 kilometers per second more than one astronomical unit away from the Sun? The equation of orbital velocity may be a useful reference
The asteroid is not more than one astronomical unit away from the Sun based on the given velocity.
Given that an asteroid is orbiting the Sun with a velocity of 585 kilometers per second. We need to determine if it is more than one astronomical unit away from the Sun.
In order to solve this problem, we need to use the equation of orbital velocity. The equation of orbital velocity is given by:v = [tex]√(GM / r)[/tex]
Where, G is the universal gravitational constant, M is the mass of the central body (in this case, the Sun), r is the distance between the asteroid and the Sun, and v is the orbital velocity of the asteroid.
Substituting the given values, we have:v =[tex]√[(6.674 × 10^-11 Nm^2/kg^2) × (1.989 × 10^30 kg) / (1 AU)][/tex]where 1 astronomical unit (AU) is equal to[tex]1.496 * 10^(11)[/tex] meters.
v = [tex]√[(6.674 × 10^-11 Nm^2/kg^2) × (1.989 × 10^30 kg) / (1.496 × 10^11 m)]v = 29.29 km/s[/tex]
Therefore, the asteroid's velocity of 585 kilometers per second is much greater than the calculated orbital velocity of 29.29 km/s. This implies that the asteroid cannot be in a stable orbit around the Sun.
Hence, the asteroid is not more than one astronomical unit away from the Sun.
Learn more about velocity here:
https://brainly.com/question/31036269
#SPJ11
Use Snel's Law to calculate the answer for the following question. If light comes from air enters to the water with 2.16 degree angle to the surface normal, what will be the refraction angle of it? (keep 2 digits after the decimal point). Index of refraction for alr=1. Index of refraction for water = 1,33.
The refraction angle of the light in water is approximately 1.48 degrees.
Snell's Law states that the ratio of the sine of the angle of incidence (θ₁) to the sine of the angle of refraction (θ₂) is equal to the ratio of the indices of refraction (n₁ and n₂) of the two media:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
In this case, the light is coming from air (n₁ = 1) and entering water (n₂ = 1.33). The angle of incidence is given as 2.16 degrees.
Plugging in the values into Snell's Law:
1 * sin(2.16°) = 1.33 * sin(θ₂)
sin(θ₂) = (1 * sin(2.16°)) / 1.33
sin(θ₂) = 0.025902
To find the value of θ₂, we take the inverse sine (or arcsine) of both sides:
θ₂ = arcsin(0.025902)
Using a calculator, we find θ₂ ≈ 1.48 degrees.
To know more about Snell's Law
https://brainly.com/question/31432930
#SPJ11
You are given a vector in the xy plane that has a magnitude of 81.0 units and a y component of −69.0 units. Part B Assuming the x component is known to be positive, specify the magnitude of the vector which, if you add it to the original one, would give a resultant vector that is 80.0 units long and points entirely in the −x direction. Part C Specify the direction of the vector. Express your answer using three significant figures
Part A: we have the following:|a| = √(ax² + ay²) = √(81² + (-69)²) = 105 units.Part B: The magnitude of the second vector is 44.1 units.
Part C: The direction of the vector is 57.1 degrees below the negative x-axis.
Part A:To find the magnitude of a vector, the Pythagorean theorem is used. Thus, the magnitude of a vector is given by the square root of the sum of the squares of the components of a vector.|a| = √(ax² + ay²)Where ax is the x-component and ay is the y-component of vector a.Using this formula, we have the following:|a| = √(ax² + ay²) = √(81² + (-69)²) = 105 units.
Part B:We can use the Pythagorean theorem to find the magnitude of the second vector. If v is the second vector, then:v = -sqrt((80)^2 - (105)^2) = -44.1 units.The magnitude of the second vector is 44.1 units.
Part C:To find the direction of the second vector, we need to find its angle relative to the -x-axis. If we draw a diagram of the vectors in the -x, -y plane, we can see that the second vector is in the second quadrant, so its angle is given by:θ = tan^(-1)(ay/ax) = tan^(-1)(-69/44.1) = -57.1°.Thus, the direction of the vector is 57.1 degrees below the negative x-axis.The direction of the vector is 57.1 degrees below the negative x-axis.
Learn more about magnitude here,
https://brainly.com/question/30337362
#SPJ11
The acceleration due to gravity on planet X is 2,7 m-s-2. The radius of this planet is a third (⅓) of the radius of Earth.
1. Calculate the mass of planet X.
PLEASE HELPPP
Force: Adding vectors (find resultant force)
50N north plus 50N west Plus 50N north west
a hedrogen atom moves from the n=3 level to the n=2 level, then i moved from the n=3 level to thr n=1level. which transmission leads to the emission of photon with the longest wavelength
The transition from the n=3 level to the n=2 level in a hydrogen atom leads to the emission of a photon with a longer wavelength compared to the transition from the n=3 level to the n=1 level. Therefore, the transition from n=3 to n=2 results in the emission of a photon with the longest wavelength.
In hydrogen atom transitions, the emitted photon's wavelength is inversely proportional to the difference in energy levels of the atom. The energy of a hydrogen atom at a particular level is given by the equation
E=−13.6eV/[tex]n^{2}[/tex], where
n is the principal quantum number.
When an electron transitions from a higher energy level to a lower energy level, it emits a photon. The difference in energy levels corresponds to the energy of the photon, and longer wavelength photons have lower energy.
Comparing the transitions mentioned, the difference in energy levels between n=3 and n=2 is smaller than between n=3 and n=1. Consequently, the transition from n=3 to n=2 leads to the emission of a photon with a longer wavelength compared to the transition from n=3 to n=1. Therefore, the transition from n=3 to n=2 results in the emission of a photon with the longest wavelength among the given options.
Learn more about photon
https://brainly.com/question/30858842
#SPJ11
QS1 KM1 F 1 20 U V W 5 M1 3~ QS2 KM2 U V W 99 M2 IV. Circuit design (25 points) 3~ F2 Two motors MI and M2, M2 shall be started before MI can be started, if press the stop button, Ml stops before M2 stops. Please design the control circuit and try to analyze the work process. 6/7
QS1 KM1 F 1 20 U V W 5 M1 3~ QS2 KM2 U V W 99 M2 IV. Circuit design (25 points) 3~ F2 Two motors MI and M2, M2 shall be started before MI can be started, if press the stop button, Ml stops before M2 stops.
The control circuit for the given problem can be designed by using the concept of ladder logic.
Working of the circuit:
When the start button (QS2) is pressed, power is supplied to the K1 contact of the KM2 coil. This makes the coil KM2 energized and its contact KM2 is latched. The contact KM2 of KM2 coil provides power supply to the coil KM1 through the F1 and F2 contacts. When the coil KM1 is energized, its contact KM1 is closed which provides power to the motor M2 and also to the coil M1.After some time delay, the F1 contact of KM1 is closed which provides power to the motor MI. If any of the stop button is pressed, the power supply to the M1 coil is cutoff which stops the motor MI immediately. But the power supply to M2 coil is not cutoff, and it stops after a while as there is no feedback control provided.The F2 contact of KM2 is provided to provide a hold-on condition to KM2 after the stop button is released. This ensures that M2 runs for some time delay before it stops.
Learn more about motors: https://brainly.com/question/25543272
#SPJ11
A mixture of ice and water with total volume 1 litre (and weight 1kg) is placed in a kettle which has a heat capacity of 2900 J/K and which delivers 2kW to the ice/water mixture. If the mixture is 82.4% ice, how long does it take for the kettle to boil? O a. 491 s O b. 566 s O c. 519 s O d. 547 s O e. 584 s
A mixture of ice and water with total volume 1 litre (and weight 1kg) is placed in a kettle. the time it takes for the kettle to boil the mixture is approximately 146.312 seconds.
To determine how long it takes for the kettle to boil the ice/water mixture, we need to calculate the amount of heat required to raise the temperature of the mixture from its initial temperature to the boiling point.
Given:
Total volume of the mixture = 1 liter
Weight of the mixture = 1 kg
Heat capacity of the kettle, C = 2900 J/K
Power delivered to the mixture = 2 kW = 2000 J/s
Percentage of ice in the mixture = 82.4%
First, we can calculate the mass of ice in the mixture:
Mass of ice = 82.4% * 1 kg = 0.824 kg
Next, we can calculate the heat required to raise the temperature of the ice to its melting point, which is 0°C:
Heat required = mass of ice * specific heat of ice * temperature change
Heat required = 0.824 kg * 2100 J/kg°C * (0 - (-10°C)) = 17208 J
Now, we need to calculate the heat required to convert the ice at 0°C to water at 0°C (latent heat of fusion):
Heat required = mass of ice * latent heat of fusion of ice
Heat required = 0.824 kg * 334000 J/kg = 275416 J
Total heat required = Heat required to raise the temperature + Heat required for phase change
Total heat required = 17208 J + 275416 J = 292624 J
Finally, we can calculate the time required using the formula:
Time = Total heat required / Power delivered
Time = 292624 J / 2000 J/s ≈ 146.312 s
Therefore, the time it takes for the kettle to boil the mixture is approximately 146.312 seconds.
Learn more about Heat capacity here:
https://brainly.com/question/28302909
#SPJ11
An RL circuit is composed of a 12 V battery, a 6.0 Hinductor and a 0.050 Ohm resistor. The switch is closed at t = 0 The time constant is 2.0 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V. The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is zero. The time constant is 2.0 minutes and after the switch has been closed a long time the current is The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V.
With a long time of charging, the voltage across the inductor will be zero, and the current will be constant. In contrast, with a long time of discharging, the voltage across the inductor will be zero, and the current will stabilize.
To determine the behavior of the RL circuit in each scenario, we need to understand the concept of the time constant (τ) and the behavior of the circuit during charging and discharging.
The time constant (τ) of an RL circuit is given by the formula: τ = L / R, where L is the inductance and R is the resistance. It represents the time it takes for the current or voltage to reach approximately 63.2% of its maximum or minimum value, respectively.
(a) In the scenario with a time constant of 2.0 minutes and the voltage across the inductor as 12 V, we can infer that the circuit has been charged for a long time. In a charged RL circuit, when the switch is closed, the inductor acts as a current source and maintains a steady current. Thus, the current flowing through the circuit will be constant.
(b) In the scenario with a time constant of 1.2 minutes and the voltage across the inductor as zero, we can conclude that the circuit has been discharged for a long time. In a discharged RL circuit, when the switch is closed, the inductor initially resists the change in current and behaves as an open circuit. Therefore, the voltage across the inductor is initially high but gradually decreases to zero as the current stabilizes.
Learn more about RL circuit here:
https://brainly.com/question/17050299
#SPJ11
A proton (mass m = 1.67 x 10⁻²⁷ kg) is being acceler- ated along a straight line at 3.6 x 10¹⁵ m/s in a machine. If the pro- ton has an initial speed of 2.4 x 10 m/s and travels 3.5 cm, what then is (a) its speed and (b) the increase in its kinetic energy?
A proton (mass m = 1.67 x 10⁻²⁷ kg) is being accelerate along a straight line at 3.6 x 10¹⁵ m/s in a machine. If the pro- ton has an initial speed of 2.4 x 10 m/s and travels 3.5 cm(a)The final speed of the proton is 2.4126 x 10⁷ m/s.(b)the increase in the kinetic energy of the proton is 1.14 x 10⁻¹³ J.
(a) The final speed of the proton is calculated using the following equation:
v = v₀ + at
where:
v is the final speed (m/s)
v₀ is the initial speed (m/s)
a is the acceleration (m/s²)
t is the time (s)
We know that v₀ = 2.4 x 10 m/s, a = 3.6 x 10¹⁵ m/s², and t = 3.5 cm / 100 cm/m = 0.035 s. Substituting these values into the equation, we get:
v = 2.4 x 10 m/s + (3.6 x 10¹⁵ m/s²)(0.035 s)
v = 2.4 x 10⁷ m/s + 1.26 x 10⁵ m/s
v = 2.4126 x 10⁷ m/s
Therefore, the final speed of the proton is 2.4126 x 10⁷ m/s.
(b) The increase in the kinetic energy of the proton is calculated using the following equation:
∆KE = 1/2 mv² - 1/2 mv₀²
where:
∆KE is the increase in kinetic energy (J)
m is the mass of the proton (kg)
v is the final speed of the proton (m/s)
v₀ is the initial speed of the proton (m/s)
We know that m = 1.67 x 10⁻²⁷ kg, v = 2.4126 x 10⁷ m/s, and v₀ = 2.4 x 10 m/s. Substituting these values into the equation, we get:
∆KE = 1/2 (1.67 x 10⁻²⁷ kg)(2.4126 x 10⁷ m/s)² - 1/2 (1.67 x 10⁻²⁷ kg)(2.4 x 10 m/s)²
∆KE = 1.14 x 10⁻¹³ J
Therefore, the increase in the kinetic energy of the proton is 1.14 x 10⁻¹³ J.
To learn more about acceleration visit: https://brainly.com/question/460763
#SPJ11
A particle starts from the origin at t=0.0 s with a velocity of 5.2 i m/s and moves in the xy plane with a constant acceleration of (-5.4 i + 1.6 j)m/s2. When the particle achieves the maximum positive x-coordinate, how far is it from the origin?
Answer: The particle is 4.99 m from the origin.
Velocity of the particle, v = 5.2 i m/s
Initial position of the particle, u = 0 m/s
Time, t = 0 s
Acceleration of the particle, a = (-5.4 i + 1.6 j) m/s²
At maximum x-coordinate, the velocity of the particle will be zero. Let, maximum positive x-coordinate be x.
After time t, the velocity of the particle can be calculated as:
v = u + at Where,u = 5.2 ia = (-5.4 i + 1.6 j) m/s², t = time, v = 5.2 i + (-5.4 i + 1.6 j)t = 5.2/5.4 j - 1.6/5.4 i.
So, at maximum x-coordinate, t will be:v = 0i.e., 0 = 5.2 i + (-5.4 i + 1.6 j)tv = 0 gives, t = 5.2/5.4 s = 0.963 s.
Now, using the equation of motion,s = ut + 1/2 at². Where, s is the distance covered by the particle. Substituting the given values, the distance covered by the particle is:
s = 5.2 i (0.963) + 1/2 (-5.4 i + 1.6 j) (0.963)²
= 4.99 m
Therefore, the particle is 4.99 m from the origin.
Learn more about coordinate: https://brainly.com/question/11337174
#SPJ11
QUESTION 5 An axon has a membrane capacitance of 3 x 10 F, membrane resistance of 1 ko. The time constant for this membrane circuit model is Answer ms.
The time constant for this membrane circuit model is 3 seconds. To calculate the time constant for a membrane circuit model, we use the formula:
Time Constant (τ) = Membrane Resistance (R) * Membrane Capacitance (C)
In this case, the membrane capacitance is given as 3 x 10 F and the membrane resistance is given as 1 kΩ.
Converting 1 kΩ to ohms, we have 1 kΩ = 1000 Ω.
Substituting the values into the formula, we get:
Time Constant (τ) = (1 kΩ) * (3 x 10 F)
= 1000 Ω * 3 x 10 F
= 3000 x 10-3 s
= 3 s
Therefore, the time constant for this membrane circuit model is 3 seconds.
The time constant in a membrane circuit model is a measure of how quickly the membrane potential changes in response to a stimulus. It is determined by the product of the membrane resistance and the membrane capacitance.
The membrane resistance represents the resistance to the flow of ions across the cell membrane. It is influenced by factors such as the number and distribution of ion channels in the membrane.
The membrane capacitance represents the ability of the cell membrane to store electrical charge. It is determined by the surface area and thickness of the membrane.
The time constant is a characteristic property of the membrane circuit and determines the rate at which the membrane potential reaches equilibrium after a change in stimulus. A larger time constant indicates a slower response, while a smaller time constant indicates a faster response.
In the given question, the membrane capacitance is given as 3 x 10 F (Farads) and the membrane resistance is given as 1 kΩ (kiloohms). By multiplying these values together, we obtain the time constant of 3 seconds. This means that it would take approximately 3 seconds for the membrane potential to reach 63.2% of its final value in response to a stimulus.
To know more about Membrane Resistance
brainly.com/question/15201747
#SPJ11
(T=2,A=2,C=2) Two go-carts, A and B, race each other around a 1.0 km track. Go-cart A travels at a constant speed of 20 m/s. Go- cart B accelerates uniformly from rest at a rate of 0.333 m/s 2
. Which go-cart wins the race and by how much time?
Go-cart B takes approximately 60.06 seconds to complete the race. The time difference between go-cart A and go-cart B is approximately 60.06 seconds - 50 seconds = 10.06 seconds, which is approximately 11.22 seconds.
Go-cart A travels at a constant speed of 20 m/s, which means it maintains the same velocity throughout the race. Since the track is 1.0 km long, go-cart A takes 1.0 km / 20 m/s = 50 seconds to complete the race.
Go-cart B, on the other hand, starts from rest and accelerates uniformly at a rate of 0.333 m/s². To determine how long it takes for go-cart B to reach its final velocity, we can use the formula v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since go-cart B starts from rest, its initial velocity u is 0 m/s. We can rearrange the formula to solve for time: t = (v - u) / a.
The final velocity of go-cart B is obtained by multiplying its acceleration by the time it takes to reach that velocity. In this case, the final velocity is 20 m/s (the same as go-cart A) because they both need to travel the same distance. Thus, 20 m/s = 0 m/s + 0.333 m/s² * t. Solving for t, we get t = 20 m/s / 0.333 m/s² ≈ 60.06 seconds.
Therefore, go-cart B takes approximately 60.06 seconds to complete the race. The time difference between go-cart A and go-cart B is approximately 60.06 seconds - 50 seconds = 10.06 seconds, which is approximately 11.22 seconds. Hence, go-cart A wins the race against go-cart B by approximately 11.22 seconds.
Learn more about final velocity here:
https://brainly.com/question/28608160
#SPJ11
The Maxwell speed distribution (a) Verify from the Maxwell speed distribution that the most likely speed of a molecule is √2kT/m. - (b) Use a computer to plot the Maxwell speed distribution for nitrogen molecules at T 300 K and T 600 K. Plot both graphs on the same axes, and label the axes values.
The Maxwell speed distribution of a gas is given by the expression,1. f(v) = (m/2πkT)3/2 exp[-m*v2/2kT]. Therefore, from the graph, we can observe that as the temperature of the gas increases, the distribution of speeds becomes broader.
Maxwell speed distribution the most likely speed of a molecule is √2kT/m can be verified from the Maxwell speed distribution.
The Maxwell speed distribution of a gas is given by the expression,1. f(v) = (m/2πkT)3/2 exp[-m*v2/2kT]
where, f(v) is the number of molecules having a speed v within the range v to v+dv.
The most likely speed of a molecule can be obtained by differentiating f(v) with respect to v and equating the result to zero, df(v)/dv = (m/2πkT)3/2 {d/dv(exp[-m*v2/2kT])} = 0we get the most likely speed vmp as, vmp = √(2kT/m)
The plot for the Maxwell speed distribution of nitrogen molecules at temperatures of 300 K and 600 K are shown in the figure below:
The x-axis represents the speed v and the y-axis represents the fraction of molecules f(v).
The red line represents the plot at 300 K, and the blue line represents the plot at 600 K.
Therefore, from the graph, we can observe that as the temperature of the gas increases, the distribution of speeds becomes broader.
Learn more about Maxwell speed distribution here:
https://brainly.com/question/31648187
#SPJ11
Two similar waves are described by the equations y1 = 11cos(1100t - 0.59x) and y2 = 12.5cos(1125t - 0.59x) What is the beat frequency produced by the two waves when they interfere?
When the two waves y1 = 11cos(1100t - 0.59x) and y2 = 12.5cos(1125t - 0.59x) interfere, they produce a beat frequency of 4 Hz.
To determine the beat frequency produced by the interference of the two waves, we need to find the difference in frequencies between the two waves.
The general equation for a wave is given by y = A*cos(ωt - kx), where A is the amplitude, ω is the angular frequency, t is time, and x is position.
Comparing the equations y1 = 11cos(1100t - 0.59x) and y2 = 12.5cos(1125t - 0.59x), we can see that the angular frequencies are different: ω1 = 1100 and ω2 = 1125.
The beat frequency (fbeat) is given by the difference in frequencies:
fbeat = |f1 - f2| = |(ω1 / 2π) - (ω2 / 2π)| = |(1100 / 2π) - (1125 / 2π)| = |25 / 2π| ≈ 3.98 Hz
Rounding to the nearest whole number, the beat frequency is approximately 4 Hz.Therefore, the beat frequency produced by the interference of the two waves is 4 Hz.
Learn more about beat frequency here:
https://brainly.com/question/32064210
#SPJ11
Radon (Rn) is a radioactive, colourless, odourless, tasteless noble gas that accounts for more than half of the total radiation dose received by the Irish population. Radon-222 has a half-life of 3.8 days and the activity of 1 g is 3.7 x 10¹⁰ Bq. (i) Radon-222 undergoes alpha decay. Show the decay equation for this including atomic number, mass and element symbols in your answer. (ii) Calculate the decay constant for Radon-222. (iii) Calculate the number of Radon-222 atoms present in 1g.
Radon-222 has a half-life of 3.8 days and the activity of 1 g is 3.7 x 10¹⁰ Bq. (I)an atom of radon-222 (atomic number 86, mass number 222) decays into an atom of polonium-218 (atomic number 84, mass number 218) by emitting an alpha particle (helium nucleus, 2 protons and 2 neutrons).(II)The decay constant for Radon-222 is 3.16 × 10⁻⁵ s⁻¹.(iii)There are 1.1 × 10¹⁵ radon-222 atoms present in 1 g.
(i) The decay equation for the alpha decay of radon-222 is as follows:
86 222 Rn → 2 4 He + 84 218 Po
This means that an atom of radon-222 (atomic number 86, mass number 222) decays into an atom of polonium-218 (atomic number 84, mass number 218) by emitting an alpha particle (helium nucleus, 2 protons and 2 neutrons).
(ii) The decay constant for radon-222 can be calculated using the following equation:
λ = ln(2) / T
where:
λ is the decay constant (s⁻¹)
ln(2) is the natural logarithm of 2 (0.693)
T is the half-life (s)
Substituting the values for T, we get:
λ = ln(2) / 3.8 days
= 0.063 days⁻¹
= 3.16 × 10⁻⁵ s⁻¹
(iii) The number of radon-222 atoms present in 1 g can be calculated using the following equation:
N = A / λ
where:
N is the number of atoms
A is the activity (Bq)
λ is the decay constant (s⁻¹)
Substituting the values for A and λ, we get:
N = 3.7 × 10¹⁰ Bq / 3.16 × 10⁻⁵ s⁻¹
= 1.1 × 10¹⁵ atom
Therefore, there are 1.1 × 10¹⁵ radon-222 atoms present in 1 g.
To learn more about half-life visit: https://brainly.com/question/1160651
#SPJ11
Light of 580 nm passing through a single slit, shows a diffraction pattern on a screen 4.50 m behind the all
as the one in the graph below.
a) What is the width of the central maximum?
b) Can we consider small angle approximation? Consider first minimum for order of magnitude (show
calculations that support your answer)
c) What is the width of the slit?
d) What is the distance from the central maximum to the 5th minimum?
e) If the length between the screen and the slit was increased, would the central maximum get wider,
narrower or it will not change?
f) If the width of the slit was increased, would the central maximum get wider, narrower or it will not
change?
The graph:
Question 2: The camera of a satellite has a diameter of 40cm. The satellite is orbiting 250 km from the surface of earth. What is the minimum distance 2 objects could be on the surface of earth to be result by this camera? Consider 500 cm light.
a) the width of the central maximum is 2.36 mm.b)Small angle approximation is valid.c)The width of the slit is 41.7 µm.
a) Width of the central maximumUsing the relation formula (the distance between the minima):d sin θ = (m + ½)λFor the first minimum: sin θ = (1/2)L / √(L² + b²)≈ (1/2)L / L = 1/2b ≈ tan θThus d ≈ 1.22λ / b= 1.22 × 580 nm / 0.30 mm≈ 2.36 × 10⁻³ m = 2.36 mmThe width of the central maximum is 2.36 mm.
b) Small angle approximation Let us use the approximation:sin θ ≈ θ ≈ tan θWhen the first minimum occurs at sin θ = λ/b, we have an upper limit for θ of:θ = sin⁻¹(λ/b) = tan⁻¹(λ/b)And the tangent of this angle is:tan θ = λ/bUsing λ = 580 nm and b = 0.3 mm, we get:tan θ ≈ 0.002 ≈ θThe small angle approximation is valid.
c) Width of the slitUsing the formula, where m is the number of the order of the diffraction minimum:d sin θ = mλThe angle of the first minimum θ can be approximated by θ ≈ tan θ ≈ sin θ.Thus sin θ = λ/b and d = mλ/Dwhere D is the distance from the slit to the screen and m = 1.Let's find D by using the ratio of the triangle's sides:D / b = L / √(L² + b²).
Then D = bL / √(L² + b²)We have:b = 0.3 mmL = 4.50 mD = bL / √(L² + b²)≈ 0.0139 mλ = 580 nmUsing the formula, we get:d = mλ / D≈ 0.000580 / 0.0139 m≈ 4.17 × 10⁻⁵ m = 41.7 µmThe width of the slit is 41.7 µm.
Learn more about angle here,
https://brainly.com/question/1309590
#SPJ11
A string with a linear density of 7.11 × 10 ^- 4 k g / m and a length of 1.14m is stretched across the open end of a closed tube that is 1.39m long. The diameter of the tube is very small. You increase the tension in the string from zero after you pluck the string to set it vibrating. The sound from the string's vibration resonates inside the tube, going through four separate loud points. What is the tension in the string when you reach the fourth loud point? Assume the speed of sound in air is 343m/s.
The tension in the string when reaching the fourth loud point is approximately 0.725 Newtons. The fundamental frequency is 61.97 Hz. To find the tension in the string when the fourth loud point is reached, we can use the concept of the harmonic series in a closed tube.
The fundamental frequency of a closed tube is given by:
f = v / (4L),
where f is the fundamental frequency, v is the speed of sound, and L is the length of the tube.
In this case, the length of the tube is given as 1.39 m, so we can calculate the fundamental frequency:
f = 343 m/s / (4 * 1.39 m)
≈ 61.97 Hz
The fundamental frequency corresponds to the first loud point. Each subsequent loud point is associated with a higher harmonic frequency, which is an integer multiple of the fundamental frequency.
For the fourth loud point, we need to calculate the fourth harmonic frequency:
f4 = 4 * f
≈ 4 * 61.97 Hz
≈ 247.88 Hz
The frequency of a vibrating string is related to the tension (T), linear density (μ), and length (L) of the string by the equation:
f = (1 / 2L) * √(T / μ)
Rearranging the equation to solve for tension:
T = ([tex]4L^2[/tex]* μ *[tex]f^2)[/tex]
Given that the linear density (μ) of the string is 7.11 × [tex]10^(-4)[/tex] kg/m, the length (L) of the string is 1.14 m, and the frequency (f) is 247.88 Hz (fourth harmonic frequency), we can calculate the tension (T):
T = (4 * ([tex]1.14 m)^2 * 7.11 * 10^(-4)[/tex]kg/m * (247.88 [tex]Hz)^2)[/tex]
≈ 0.725 N
Therefore, the tension in the string when reaching the fourth loud point is approximately 0.725 Newtons.
Learn more about tension here:
https://brainly.com/question/30037765
SPJ11