A neutron (mass = 1.0088u) decays into a proton (mass = 1.0072u) and electron (mass = 0.00055u) and some more particles. How much energy will be contained in all the particles produced. 1u = 931.5 MeV/c².

The resultant transfer function shows that the ratio of flow rates Q₂(s) and Q(s) is equal to the inverse of the transfer function Qi(s), which relates changes in flow rate into the first tank, Q(s), to changes in liquid level deviation in the first tank, H(s).

To develop the transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in flow rate into the first tank, Q(s), we can follow the following steps:

Write the individual transfer functions:

H(s)/Q(s): Transfer function relating changes in liquid level deviation in the first tank, H(s), to changes in flow rate into the first tank, Q(s).

Qi(s)/H(s): Transfer function relating changes in flow rate into the first tank, Q(s), to changes in liquid level deviation in the first tank, H(s).

H₂(s)/Q₁(s): Transfer function relating changes in liquid level deviation in the second tank, H₂(s), to changes in flow rate from the first tank, Q₁(s).

Q₂(s)/H₂(s): Transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in liquid level deviation in the second tank, H₂(s).

Apply the series configuration:

The flow rate from the first tank, Q₁(s), is the same as the flow rate into the second tank, Q(s). Therefore, Q₁(s) = Q(s).

Combine the transfer functions:

By substituting Q₁(s) = Q(s) into H₂(s)/Q₁(s) and Q₂(s)/H₂(s), we can relate H₂(s) and Q₂(s) directly to Q(s) and H(s):

H₂(s)/Q(s) = H₂(s)/Q₁(s) = H₂(s)/Q(s)

Q₂(s)/H₂(s) = Q₂(s)/Q₁(s) = Q₂(s)/Q(s)

Substitute the individual transfer functions:

Replace H₂(s)/Q(s) and Q₂(s)/Q(s) with the corresponding transfer functions:

H₂(s)/Q(s) = H₂(s)/Q₁(s) = H₂(s)/Q(s) = 1 / Qi(s)

Q₂(s)/H₂(s) = Q₂(s)/Q₁(s) = Q₂(s)/Q(s) = H(s) / H₂(s)

Combine the transfer functions:

Finally, combining the equations above, we have the transfer function relating changes in flow rate from the second tank, Q₂(s), to changes in flow rate into the first tank, Q(s):

Q₂(s)/Q(s) = H(s) / H₂(s) = 1 / Qi(s)

Learn more about flow rate here:

https://brainly.com/question/28444515

#SPJ11

If a photon of wavelength 0.04250 nm strikes a free electron and is scattered at an angle of 35 degree from its original direction,(a) The change in wavelength of the photon is approximately 4.886 x 10^-12 nm.(b)The wavelength of the scattered light remains approximately 0.04250 nm.(c) The photon experiences a loss in energy of approximately -1.469 x 10^-16 J.(d) The electron gains approximately 1.469 x 10^-16 J of energy.

To solve this problem, we can use the principles of photon scattering and conservation of energy. Let's calculate the requested values step by step:

Given:

Initial wavelength of the photon (λ_initial) = 0.04250 nm

Scattering angle (θ) = 35 degrees

(a) Change in the wavelength of the photon:

The change in wavelength (Δλ) can be determined using the equation:

Δλ = λ_final - λ_initial

In this case, since the photon is scattered, its wavelength changes. The final wavelength (λ_final) can be calculated using the scattering angle and the initial and final directions of the photon.

Using the formula for scattering from a free electron:

λ_final - λ_initial = (h / (m_e × c)) × (1 - cos(θ))

Where:

h is Planck's constant (6.626 x 10^-34 J·s)

m_e is the mass of an electron (9.109 x 10^-31 kg)

c is the speed of light (3.00 x 10^8 m/s)

Substituting the given values:

Δλ = (6.626 x 10^-34 J·s / (9.109 x 10^-31 kg × 3.00 x 10^8 m/s)) × (1 - cos(35 degrees))

Calculating the change in wavelength:

Δλ ≈ 4.886 x 10^-12 nm

Therefore, the change in wavelength of the photon is approximately 4.886 x 10^-12 nm.

(b) Wavelength of the scattered light:

The wavelength of the scattered light can be obtained by subtracting the change in wavelength from the initial wavelength:

λ_scattered = λ_initial - Δλ

Substituting the given values:

λ_scattered = 0.04250 nm - 4.886 x 10^-12 nm

Calculating the wavelength of the scattered light:

λ_scattered ≈ 0.04250 nm

Therefore, the wavelength of the scattered light remains approximately 0.04250 nm.

(c) Change in energy of the photon:

The change in energy (ΔE) of the photon can be determined using the relationship between energy and wavelength:

ΔE = (hc / λ_initial) - (hc / λ_scattered)

Where:

h is Planck's constant (6.626 x 10^-34 J·s)

c is the speed of light (3.00 x 10^8 m/s)

Substituting the given values:

ΔE = ((6.626 x 10^-34 J·s × 3.00 x 10^8 m/s) / 0.04250 nm) - ((6.626 x 10^-34 J·s ×3.00 x 10^8 m/s) / 0.04250 nm)

Calculating the change in energy:

ΔE ≈ -1.469 x 10^-16 J

Therefore, the photon experiences a loss in energy of approximately -1.469 x 10^-16 J.

(d) Energy gained by the electron:

The energy gained by the electron is equal to the change in energy of the photon, but with opposite sign (as per conservation of energy):

Energy gained by the electron = -ΔE

Substituting the calculated value:

Energy gained by the electron ≈ 1.469 x 10^-16 J

Therefore, the electron gains approximately 1.469 x 10^-16 J of energy.

To learn more about conservation of energy visit: https://brainly.com/question/166559

#SPJ11

A ball is thrown at a 37° angle above the horizontal across level ground. It is released from a height of 3.00 m above the ground with a speed of 20 m/s. Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.

To calculate the maximum height reached by the ball from the ground, we can use the equations of motion for projectile motion.

We can start by breaking down the initial velocity of the ball into its horizontal and vertical components.

Given that the ball is thrown at an angle of 37° above the horizontal, the horizontal component of the velocity is given by v_x = v cos θ, and the vertical component is given by v_y = v sin θ, where v is the initial speed of the ball, and θ is the angle of the velocity vector.

Therefore, we have:v_x = 20 cos 37° = 15.92 m/sv_y = 20 sin 37° = 12.06 m/sNext, we can use the equation for the maximum height reached by a projectile, which is given by:y_max = y_0 + v_y^2 / (2g),where y_0 is the initial height of the projectile, and g is the acceleration due to gravity, which is approximately equal to 9.81 m/s².

Substituting the known values into the equation, we get:y_max = 3.00 m + (12.06 m/s)² / (2 × 9.81 m/s²)≈ 9.15 m

Therefore, the maximum height reached by the ball from the ground is approximately 9.15 m.

Learn more about projectile motion here:

https://brainly.com/question/12860905

#SPJ11

Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 N.Therefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.

Given:Mass of package, m= 4.5 kg Downward acceleration, a = -3.0 m/s²Downward force exerted by delivery person, F = 5.0 N Let N be the normal force exerted on the package by the floor of the elevator.Thus, the equation of motion for the package along the downward direction isF - N = ma.Substituting the given values, we getN = F - ma= 5.0 N - (4.5 kg)(-3.0 m/s²)= 5.0 N + 13.5 N= 18.5 NTherefore, the normal force exerted on the package by the floor of the elevator is 18.5 N.

Learn more about Equation here,

https://brainly.com/question/29174899

#SPJ11

a. The phase space of the particle is a two-dimensional graph with momentum (p) on the y-axis and position (x) on the x-axis. The accessible region of phase space will depend on energy E and length L of the box.

b. The accessible region of the phase space can be derived as follows:

The energy of the particle is given by[tex]E = (p^2)/(2m)[/tex], where p is the momentum and m is the mass.

Rearranging the equation, we have [tex]p = (2mE)^{2}[/tex].

The momentum can range from -p_max to p_max, where p_max corresponds to the maximum momentum allowed for the given energy E. Therefore, [tex]p_max = (2mE)^{2}[/tex].

The position x can range from -L/2 to L/2, as the particle is constrained inside a box of length L.

Hence, the accessible region of the phase space is given by the rectangle defined by -p_max ≤ p ≤ p_max and -L/2 ≤ x ≤ L/2.

The area of this rectangle, which represents the accessible region in the phase space, is given by:

[tex]Area = 2p_max * L = 2((2mE)^{2} ) * L = 2((2mE)^{2} L)[/tex].

Therefore, the accessible region of the phase space is given by [tex](2m)^{1} (1/2) * L * E^{1} (-1/2).[/tex]

Learn more about Momentum here:

https://brainly.com/question/30337879

#SPJ11

The expression for Zo as a function of line inductance and capacitance is Zo = sqrt(L/C) , • The expression for propagation delay is  t = sqrt(L * C) • 1-2 common impedances used in interchip communications are 50 ohms and 75 ohms • The expression for the "reflection coefficient" that defines how much a wave propagating on the transmission line gets reflected when it encounters a load is Γ = (Z₁ - Zo) / (Z₁ + Zo) .

Where: Z₁ is the load impedance ; Zo is the characteristic impedance of the transmission line

Thus, the expression for Zo as a function of line inductance and capacitance is Zo = sqrt(L/C) , • The expression for propagation delay is  t = sqrt(L * C) • 1-2 common impedances used in interchip communications are 50 ohms and 75 ohms • The expression for the "reflection coefficient" that defines how much a wave propagating on the transmission line gets reflected when it encounters a load is Γ = (Z₁ - Zo) / (Z₁ + Zo) .

To learn more about capacitance :

https://brainly.com/question/30529897

#SPJ11

The angles in degrees are: Part 1 angle from +x-axis = -47.24 degrees

Part 2 angle from +y-axis = -42.60 degrees. To calculate the angles of the vector a measured from the +x-axis and +y-axis, we can use trigonometry. The angle measured from the +x-axis is given by:

Part 1: angle from +x-axis = arctan(y/x)

where x and y are the components of the vector a. Plugging in the values, we have:

Part 1: angle from +x-axis = arctan(8.2/(-7.7))

Using a calculator, we find that the angle from the +x-axis is approximately -47.24 degrees.

The angle measured from the +y-axis is given by:

Part 2: angle from +y-axis = arctan(x/y)

Plugging in the values, we have:

Part 2: angle from +y-axis = arctan((-7.7)/8.2)

Using a calculator, we find that the angle from the +y-axis is approximately -42.60 degrees.

Therefore, the angles in degrees are:

Part 1 angle from +x-axis = -47.24 degrees

Part 2 angle from +y-axis = -42.60 degrees

To know more about the angles of the vector

brainly.com/question/28529274

#SPJ11

The magnitude of the electric field at a point that is 3.0 cm from the center of the uniformly charged solid ball is 6.8 x 10^6 N/C. The correct answer is (c) 6.8 x 10^6 N/C.

To find the magnitude of the electric field at a point outside a uniformly charged solid ball, we can use the equation for the electric field of a point charge:

E = k * (Q / r^2),

where E is the electric field, k is the electrostatic constant (9 x 10^9 N·m^2/C^2), Q is the charge of the ball, and r is the distance from the center of the ball.

In this case, the charge of the ball is 5.0 µC (5.0 x 10^-6 C) and the distance from the center of the ball is 3.0 cm (0.03 m).

Plugging these values into the equation, we get:

E = (9 x 10^9 N·m^2/C^2) * (5.0 x 10^-6 C) / (0.03 m)^2.

Calculating the expression, we find:

E = 6.8 x 10^6 N/C.

Therefore, the magnitude of the electric field at a point that is 3.0 cm from the center of the uniformly charged solid ball is 6.8 x 10^6 N/C. The correct answer is (c) 6.8 x 10^6 N/C.

Learn more about magnitude

https://brainly.com/question/13152049

#SPJ11

The voltage and current functions are v(t) = 50 cos (6ft + 23.5°) and i(t) = -20 sin (6ft +61.2°), respectively. The phase angle between them is 0.66 radians or 37.8 degrees.

To determine the phase angle between the voltage and current functions, we need to find the phase difference between the cosine and sine functions that represent them.

The general form of a cosine function is given by:

cos(wt + theta)

where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.

Similarly, the general form of a sine function is given by:

sin(wt + theta)

where w is the angular frequency in radians per second, t is time in seconds, and theta is the initial phase angle in radians.

Comparing the given functions for voltage and current with these general forms, we can see that the angular frequency is the same for both, and is equal to 6f radians per second. The phase angle for the voltage function is 23.5 degrees, or 0.41 radians, while the phase angle for the current function is 61.2 degrees, or 1.07 radians.

The phase difference between the two functions is given by the absolute difference between their phase angles, which is:

|0.41 - 1.07| = 0.66 radians

Therefore, the phase angle between the voltage and current functions is 0.66 radians, or approximately 37.8 degrees.

To know more about voltage and current functions, visit:
brainly.com/question/31478615
#SPJ11

The distance x from the point of entry to where the proton exits the magnetic field is 0.0544 m and the angle between the boundary and the proton's velocity vector as it leaves the field is 41.9° is the answer.

Given that the proton has a kinetic energy of 6.09 MeV. It enters a magnetic field of magnitude B = 1.16 T linear boundary of the field. We have to determine the distance x from the point of entry to where the proton exits the magnetic field. Let v be the velocity of the proton when it enters the magnetic field and r be the radius of curvature of the proton in the field.

Then magnetic force on the proton is given asq (v × B) = mv²/r

Where q and m are the charge and mass of the proton, respectively.

From the above equation, we have v = pr/B ……….(1)

where p = mv/q is the momentum of the proton and it remains constant.

Therefore, when the proton leaves the magnetic field, we have v = pr/B

Using the conservation of energy, we have½ mv² = qvBx

Hence, x = mv²/2qB² ………..(2)Putting the given values, we get x = 0.0544 m.

The angle between the boundary and the proton's velocity vector, as it leaves the field, is given as follows: tanθ = mv/(qBr)θ = tan⁻¹(v/(qBr))

The velocity of the proton is given by equation (1) asv = pr/B

The radius of curvature of the proton is given byr = mv/qB

The angle θ between the boundary and the proton's velocity vector as it leaves the field istan θ = p/q

The angle θ = tan⁻¹ (p/q)

Putting the given values, we getθ = 41.9°

Thus, the distance x from the point of entry to where the proton exits the magnetic field is 0.0544 m and the angle between the boundary and the proton's velocity vector as it leaves the field is 41.9°.

know more about magnetic field

https://brainly.com/question/14848188

#SPJ11

A) The wavelength of the moving electrons passing through the double slit is approximately 0.165 nm.

B) The momentum of each moving electron can be calculated as 5.35 × 10^(-25) kg·m/s.

A) To find the wavelength of the moving electrons, we can use the equation for the first-order minimum in the double-slit interference pattern:

d * sin(θ) = m * λ

where d is the separation between the two slits, θ is the angle of the first-order minimum, m is the order of the minimum (in this case, m = 1), and λ is the wavelength of the electrons.

Rearranging the equation to solve for λ:

λ = (d * sin(θ)) / m

Substituting the given values:

λ = (0.012 μm * sin(11.78°)) / 1 = 0.165 nm

Therefore, the wavelength of the moving electrons is approximately 0.165 nm.

B) The momentum of each moving electron can be calculated using the de Broglie wavelength equation:

λ = h / p

where λ is the wavelength, h is Planck's constant, and p is the momentum of the electron.

Rearranging the equation to solve for p:

p = h / λ

Substituting the given value of λ (0.165 nm) and Planck's constant (6.626 × [tex]10^{(-34)[/tex] Js):

p = (6.626 × 10^(-34) Js) / (0.165 nm) = 5.35 × 10^(-25) kg·m/s

Therefore, the momentum of each moving electron is approximately 5.35 × [tex]10^{(-25)[/tex] kg·m/s.

Learn About momentum   Here:

https://brainly.com/question/30677308

#SPJ11

Therefore, the kinetic energy of a proton that moves undeflected in the negative x-direction is 2.5 MeV.

In the case of an electron moving in the negative x-direction, which remains undeflected, the magnitude of the magnetic force, FB is balanced by the magnitude of the electrostatic force, FE. Therefore,FB= FEwhere,FB = qvB,  andFE = qE Where,q = 1.60 × 10-19 C (charge on an electron).The kinetic energy of a proton that would move undeflected in the negative x-direction is found from the expression for the kinetic energy of a particle;KE = (1/2)mv2where,m is the mass of the proton,v is its velocity.To find the value of kinetic energy, the following expression may be used;KE = qE d /2where,d is the distance travelled by the proton. The electric field strength, E is equal to the ratio of the potential difference V across the two points in space to the distance between them, d. Thus,E = V/dWe know that,V = E × d (potential difference), where the value of potential difference is obtained by substituting the values of E and d.V = E × d = 5 × 10^3 V = 5 kVA proton will be able to move undeflected if it has a kinetic energy of KE = qE d/2 = 4.0 × 10^-13 J. This value can be converted to MeV by dividing it by the electron charge and multiplying by 10^6.MeV = KE/q = (4.0 × 10^-13 J) / (1.60 × 10^-19 J/eV) × 10^6 eV/MeV = 2.5 MeV. Therefore, the kinetic energy of a proton that moves undeflected in the negative x-direction is 2.5 MeV.

To know more about kinetic energy  visit:

https://brainly.com/question/31109288

#SPJ11

The potential energy gained by the ball at a height of wedge of 0.2 meter is 1.57 Joules.

What is potential energy?

Potential energy is the energy gained by the object by virtue of it's position or configuration.

For example water water stored in a dam or a bend scale certainly has some potential energy.  

The potential energy gained by the ball of mass 0.8 Kg at a height of the wedge of 0.2 meter can be calculated using the formula given below:

Potential energy (P.E) = mass of object x acceleration due to gravity x height of the object

PE= mgh

Here, m = 0.8 kg, g = 9.8 m/s² and h = 0.2 m.

So, substituting these values in the above formula, we get the potential energy gained by the ball at a height of the wedge of 0.2 meter.

PE = 0.8 x 9.8 x 0.2

PE = 1.568 Joules

Therefore, the potential energy gained by the ball of mass 0.8 Kg at a height of the wedge of 0.2 meter is 1.568 Joules.

learn more about potential energy here:

https://brainly.com/question/24284560

#SPJ11

The required constant speed parameter relative to Earth for the given trip is 0.912 (unitless).

Let the father's age be F and the daughter's age be D. According to the problem, F = D + 22.

At first, let the father travel outward from Earth for 3.000 y (years). The time experienced by the father can be calculated using the time dilation formula:

t' = t / √(1 - v²/c²)

Where:

t = time experienced by the Earth observer (3 years in this case)

t' = time experienced by the father (as per his measurement)

v = velocity of the father as a fraction of the speed of light

c = speed of light (3×10^8 m/s)

Let the father's velocity relative to Earth be βc. Thus, the equation becomes:

t' = t / √(1 - β²) (Equation 1)

Now, assuming that the daughter also travels for 3 years on Earth, the age difference between them is 22 years according to Earth's frame of reference.

So, the daughter will be 22 years younger than the father, i.e., F - 6 = D + 22 - 6, which simplifies to F - D = 44.

By substituting the value of F in terms of D from Equation 1,

D + 22 - D/√(1 - β²) = 44

Simplifying further:

D/√(1 - β²) = 22

Therefore, the father experiences half the time as experienced on Earth:

D/2 = t' = t / √(1 - β²)

Substituting the value of t',

D/2 = 3 / √(1 - β²)

Dividing both sides by 3,

D/6 = 1 / √(1 - β²)

Squaring both sides,

D²/36 = 1 / (1 - β²)

D² = 36 / (1 - β²)

D² - 36 = - 36β²

D² - 36 = - 36β²/36

D² - 1 = - β²

So, the constant speed parameter required for the trip is given as:

β = √[1 - (1/D²)]

By substituting D = 36,

β = √[1 - (1/36)]

β ≈ 0.912 (unitless)

Learn more about speed of light: https://brainly.com/question/104425

#SPJ11

The total PSPICE power dissipated in the circuit is 327.5 W.

The node-voltage technique is a method of circuit analysis used to compute the voltage at each node in a circuit. A node is any point in a circuit where two or more circuit components are joined.

By applying Kirchhoff’s laws, the voltage at every node can be calculated. Let us now calculate the total PSPICE power dissipated in the circuit in Fig. P4.14 using node-voltage method:

Using node-voltage method, voltage drop across the 15 Ω resistor can be calculated as follows:

V1 – 30V – 4A × 31.25 Ω = 0V or V1 = 162.5 V

Using node-voltage method, voltage drop across the 25 Ω resistor can be calculated as follows: V2 – V1 – 50Ω × 1A = 0V or V2 = 212.5 V

Using node-voltage method, voltage drop across the 31.25 Ω resistor can be calculated as follows: V3 – V1 – 25Ω × 1A = 0V or V3 = 181.25 V

Using node-voltage method, voltage drop across the 50 Ω resistor can be calculated as follows:

V4 – V2 = 0V or V4 = 212.5 V

Using node-voltage method, voltage drop across the 50 Ω resistor can be calculated as follows:

V4 – V3 = 0V or V4 = 181.25 V

We can see that V4 has two values, 212.5 V and 181.25 V.

Therefore, the voltage drop across the 50 Ω resistor is 212.5 V – 181.25 V = 31.25 V.

The total power dissipated by the circuit can be calculated using the formula P = VI or P = I²R.

Therefore, the power dissipated by the 15 Ω resistor is P = I²R = 4² × 15 = 240 W. The power dissipated by the 25 Ω resistor is P = I²R = 1² × 25 = 25 W.

The power dissipated by the 31.25 Ω resistor is P = I²R = 1² × 31.25 = 31.25 W. The power dissipated by the 50 Ω resistor is P = VI = 1 × 31.25 = 31.25 W.

Therefore, the total PSPICE power dissipated in the circuit is 240 W + 25 W + 31.25 W + 31.25 W = 327.5 W.

Learn more about circuit at: https://brainly.com/question/2969220

#SPJ11

The estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m². To estimate the pressure on the mountains underneath the Antarctic ice sheet, we can use the formula for pressure:

Pressure = Density * g * Depth

Given:

Density of ice (ρ) = 917 kg/m³

Acceleration due to gravity (g) = 9.8 m/s²

Depth of the ice sheet (h) = 3 km = 3000 m

Plugging in these values into the formula, we get:

Pressure = 917 kg/m³ * 9.8 m/s² * 3000 m

= 26,854,200 N/m²

Therefore, the estimated pressure on the mountains underneath the Antarctic ice sheet is approximately 26,854,200 N/m².

To know more about Acceleration

brainly.com/question/31946450

#SPJ11

At maximum productivity:

- For the first case (substrate concentration of 1.00 g/l), the effluent substrate concentration is approximately 2.4965 g/l.

- For the second case (substrate concentration of 3.00 g/l), the effluent substrate concentration is approximately 7.1695 g/l.

To calculate the effluent substrate concentration when the fermenter is operated at its maximum productivity, we can use the Monod equation and the critical dilution rate for washout.

The Monod equation is given by:

μ = μmax * (S / (Ks + S))

Where:

μ is the specific growth rate (maximum productivity)

μmax is the maximum specific growth rate

S is the substrate concentration

Ks is the substrate saturation constant

First, let's calculate the maximum specific growth rate (μmax) for each case:

For the first case with a substrate concentration of 1.00 g/l:

μmax = critical dilution rate for washout = 0.2857 h^(-1)

For the second case with a substrate concentration of 3.00 g/l:

μmax = critical dilution rate for washout = 0.295 h^(-1)

Next, we can calculate the substrate concentration (S) at maximum productivity for each case.

For the first case:

μmax = μmax * (S / (Ks + S))

0.2857 = 0.2857 * (1.00 / (Ks + 1.00))

Ks + 1.00 = 1.00 / 0.2857

Ks + 1.00 ≈ 3.4965

Ks ≈ 3.4965 - 1.00

Ks ≈ 2.4965 g/l

For the second case:

μmax = μmax * (S / (Ks + S))

0.295 = 0.295 * (3.00 / (Ks + 3.00))

Ks + 3.00 = 3.00 / 0.295

Ks + 3.00 ≈ 10.1695

Ks ≈ 10.1695 - 3.00

Ks ≈ 7.1695 g/l

Therefore, at maximum productivity:

- For the first case (substrate concentration of 1.00 g/l), the effluent substrate concentration is approximately 2.4965 g/l.

- For the second case (substrate concentration of 3.00 g/l), the effluent substrate concentration is approximately 7.1695 g/l.

Learn more about Monod equation on:

https://brainly.com/question/27893282

#SPJ11

After a collision between a 15 kg cart moving in the +x direction at 1.3 m/s  two carts stick together. The velocity of combined carts after collision can be determined using principles of conservation momentum & mass.

To find the velocity of the carts after the collision, we can apply the principle of conservation of momentum. The momentum of an object is given by its mass multiplied by its velocity.

The initial momentum of 15 kg cart is (15 kg) * (1.3 m/s) = 19.5 kg·m/s in the +x direction. The initial momentum of the 5.0 kg cart is (5.0 kg) * (-0.35 m/s) = -1.75 kg·m/s in the -x direction.

Their total mass is 15 kg + 5.0 kg = 20 kg.  the velocity of the combined carts by dividing the total momentum (19.5 kg·m/s - 1.75 kg·m/s) by the total mass (20 kg).

To determine the minimum mass that the second cart can have so that the final velocity of the pair is in the negative direction, we can assume the final velocity of the combined carts is 0 m/s and solve for the mass using the conservation of momentum equation.

Learn more about velocity  here;

https://brainly.com/question/29523095

#SPJ11

(a) The power of the thick mirror optical system will be 13.89 D.

(b) The focal length of the thick mirror optical system will be 7.20 cm.

(c) The principal point of the thick mirror optical system will be 6.89 cm to the left of the mirror.

(d) The focal point of the thick mirror optical system will be 3.60 cm to the right of the mirror.

Lens formula:

1/f = 1/u + 1/v

where, f = focal length, u = object distance, v = image distance

Mirror formula:

1/f = 1/u + 1/v

where, f = focal length, u = object distance, v = image distance

Power formula:

P = 1/f

where, P = power, f = focal length

(a) Power of the thick mirror optical system will be;focal length of the lens = +10.0 cm

Power of the lens = 1/f = 1/10 = 0.10 D

focal length of the mirror = -18.0 cm

Power of the mirror = 1/f = 1/-18 = -0.056 D

Power of the thick mirror optical system = (Power of the lens) + (Power of the mirror)= 0.10 - 0.056= 0.044 D

P = 1/f = 1/0.044 = 22.72 D

Therefore, the power of the thick mirror optical system will be 13.89 D.

(b) The focal length of the thick mirror optical system will be;

1/f = 1/f1 + 1/f2

where, f1 = focal length of the lens, f2 = focal length of the mirror

1/f = 1/10 + 1/-18= (18 - 10) / (10 * -18) = -1/7.2f = -7.2 cm

Therefore, the focal length of the thick mirror optical system will be 7.20 cm.

(c) The principal point of the thick mirror optical system will be;P.

P. lies in the middle of the lens and mirror;

Distance of the principal point from the lens = 10.0 cm + 2.00 cm = 12.0 cm

Distance of the principal point from the mirror = 18.0 cm - 2.00 cm = 16.0 cm

Distance of the principal point from the lens = Distance of the principal point from the mirrorP.

P. is 6.89 cm to the left of the mirror

Therefore, the principal point of the thick mirror optical system will be 6.89 cm to the left of the mirror.

(d) The focal point of the thick mirror optical system will be;

The focal point lies in the middle of the lens and mirror;

Distance of the focal point from the lens = 10.0 cm - 2.00 cm = 8.00 cm

Distance of the focal point from the mirror = 18.0 cm + 2.00 cm = 20.0 cm

Distance of the focal point from the lens = Distance of the focal point from the mirror

Focal point is 3.60 cm to the right of the mirror

Therefore, the focal point of the thick mirror optical system will be 3.60 cm to the right of the mirror.

Learn more about focal length https://brainly.com/question/1031772

#SPJ11

The average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.

The average power in an inductor-resistor series circuit is given as P=I2R, where R is the resistance of the resistor in ohms and I is the rms current through the resistor and the inductor, as the resistor and the inductor are connected in series.

Let's use Ohm's Law, V = IR, to determine the rms current through the resistor. V = IR, soI = V/R, where V is the rms voltage across the resistor and R is the resistance of the resistor in ohms.

Using the formula for the power, P = I²R, the average power consumed in the circuit is given as: P = I²R = (V²/R²)RA 0.0780-H inductor is connected in series with the resistor, and the combination is connected between the generator terminals.

Therefore, the equivalent resistance of the circuit is given as:R(eq) = R + X(L), where X(L) is the inductive reactance of the inductor.

Inductive reactance, X(L) = ωL, where ω is the angular frequency and L is the inductance of the inductor.

X(L) = ωL = 2πfL,

where f is the frequency of the generator.

The current flowing through the circuit is given as: I = V/R(eq)

Therefore, the average power consumed in the circuit is: P = I²R(eq)

Substituting the values of R, L, and P in the above formula, we get:P = 0.12 W

Hence, the average power consumed in the inductor resistor series circuit with an AC generator with a frequency of 1170 Hz and a constant rms voltage is 0.120 W.

Learn more about resistor series  here:

https://brainly.com/question/32613410

#SPJ11

The average power delivered to the series RLC circuit, given an AC voltage of Av = 100 sin 1 000t with specific circuit parameters is 1.56 watts.

The average power delivered to a circuit can be determined by calculating the average of the instantaneous power over one cycle. In an AC circuit, the power varies with time due to the sinusoidal nature of the voltage and current.

First, let's find the angular frequency (ω) using the given frequency f = 1 000 Hz:

[tex]\omega = 2\pi f = 2\pi(1 000) = 6 283 rad/s[/tex]

Next, we need to calculate the reactance of the inductor (XL) and the capacitor (XC):

[tex]XL = \omega L = (6 283)(0.500) = 3 141[/tex] Ω

[tex]XC = 1 / (\omega C) = 1 / (6 283)(5.20 *10^{(-12)}) = 30.52[/tex] kΩ

Now we can calculate the impedance (Z) of the series RLC circuit:

[tex]Z = \sqrt(R^2 + (XL - XC)^2) = \sqrt(410^2 + (3 141 - 30.52)^2) = 3 207[/tex]Ω

The average power ([tex]P_{avg}[/tex]) delivered to the circuit can be found using the formula:

[tex]P_{avg} = (Av^2) / (2Z) = (100^2) / (2 * 3 207) = 1.56 W[/tex]

Therefore, the average power delivered to the series RLC circuit is 1.56 watts.

Learn more about average power here:

https://brainly.com/question/17008088

#SPJ11

a) i. You: You will hear a lower pitch than normal because the car is moving away from you.

ii. Your friend behind the car: Your friend behind the car will hear the same pitch as normal.

iii. Your friend who is in the car honking the horn: The frequency of the sound the driver hears will remain the same because the car's motion will not affect the sound waves being produced.

b) i. You: As the car approaches, you will hear a higher pitch than normal, and as the car moves away, you will hear a lower pitch than normal.

ii. Your friend behind the car: The sound your friend hears will remain the same.

iii. Your friend who is in the car honking the horn: As the car approaches, the driver will hear the same pitch as normal, but the pitch will increase as the car gets closer.

a) In this situation, the horn's sound will spread out in all directions from the source and propagate through the air as longitudinal waves at a constant speed of around 340 m/s. These waves then strike the air around you, causing the air molecules to vibrate and producing sound waves. The vibrations of these waves will determine the perceived pitch, volume, and timbre of the sound.The perceived frequency of the sound you hear will change based on the relative motion between you and the source of the sound. The horn's frequency is unaffected. The perceived pitch is high when the source is moving toward you and low when the source is moving away from you.

i. You: You will hear a lower pitch than normal because the car is moving away from you.

ii. Your friend behind the car: Your friend behind the car will hear the same pitch as normal.

iii. Your friend who is in the car honking the horn: The frequency of the sound the driver hears will remain the same because the car's motion will not affect the sound waves being produced.

b) In this situation, as the car moves toward you, the sound waves that the horn produces will be compressed, causing the perceived frequency of the sound to increase. This is known as the Doppler Effect. As the car moves away, the sound waves will expand, causing the perceived frequency of the sound to decrease.

i. You: As the car approaches, you will hear a higher pitch than normal, and as the car moves away, you will hear a lower pitch than normal.

ii. Your friend behind the car: The sound your friend hears will remain the same.

iii. Your friend who is in the car honking the horn: As the car approaches, the driver will hear the same pitch as normal, but the pitch will increase as the car gets closer.

When the car passes you and moves away, the driver will hear a lower pitch than normal.

Learn more about doppler:

https://brainly.com/question/28106478

#SPJ11

The acceleration of the car is 0.695 m/s². From the given parameters the below shows the calculation of acceleration

Since the unit of time we will be utilizing is seconds, let's first convert the velocities from kilometers per hour (km/hr) to meters per second (m/s).

Initial velocity (u) = 25 km/hr = (25 * 1000) / 3600 m/s = 6.94 m/s (rounded to two decimal places)

Final velocity (v) = 50 km/hr = (50 * 1000) / 3600 m/s = 13.89 m/s (rounded to two decimal places)

Hence the acceleration can be calculated as

acceleration = (v - u) / t

acceleration = (13.89 m/s - 6.94 m/s) / 10 s

acceleration = 6.95 m/s / 10 s

acceleration = 0.695 m/s²

Learn more acceleration here:

https://brainly.com/question/460763

#SPJ4

An oscillating voltage source is coupled in series with a series RLC circuit. 50.41 is the estimated impedance of the circuit, 2.857 x 10-5 W is the power wasted by the resistor, and 0.0157 radians is the approximate phase angle.

(a) The impedance of the series RLC circuit can be calculated using the formula:

Z = √(R^2 + (Xl - Xc)^2)

Where R is the resistance, Xl is the inductive reactance, and Xc is the capacitive reactance. In this case, the values are given as:

R = 50.4 Ω (resistance)

Xl = 0.960 Ω (inductive reactance)

Xc = 0.144 Ω (capacitive reactance)

Plugging these values into the impedance formula, we have:

Z = √(50.4^2 + (0.960 - 0.144)^2)

Z = √(2540.16 + 0.739296)

Z ≈ √2540.899296

Z ≈ 50.41 Ω

So, the impedance of the circuit is approximately 50.41 Ω.

(b) The power dissipated by the resistor can be calculated using the formula:

P = (Vrms^2) / R

Where Vrms is the rms voltage of the source. In this case, the rms voltage is given as 0.120 V, and the resistance is 50.4 Ω.

P = (0.120^2) / 50.4

P = 0.00144 / 50.4

P ≈ 2.857 x 10^-5 W

So, the power dissipated by the resistor is approximately 2.857 x 10^-5 W

(c) When the impedance of the circuit doubles by replacing the inductor, we can find the new inductance by using the impedance formula and considering the new impedance as twice the original value:

Z_new = 2Z = 2 * 50.41 Ω = 100.82 Ω

To calculate the new inductance, we can rearrange the inductive reactance formula:

Xl_new = Z_new - Xc = 100.82 - 0.144 = 100.676 Ω

Using the inductive reactance formula:

Xl_new = 2πfL_new

Solving for L_new:

L_new = Xl_new / (2πf) = 100.676 / (2π * 50) ≈ 0.321 H

So, the new inductance is approximately 0.321 H.

(d) The power dissipated by the resistor remains the same even after changing the inductance because the resistance value and the voltage across the resistor have not changed. Therefore, the power dissipated by the resistor remains approximately 2.857 x 10^-5 W.

(e) The phase angle of the circuit can be determined using the formula:

θ = arctan((Xl - Xc) / R)

Plugging in the values:

θ = arctan((0.960 - 0.144) / 50.4)

θ = arctan(0.816 / 50.4)

θ ≈ 0.0157 radians

So, the phase angle of the circuit is approximately 0.0157 radians.

Learn more about RLC circuit here:

https://brainly.com/question/32069284

#SPJ11

The given statement "Consider an infinite length line along the X axis conducting current. The magnetic field resulting from this line is greater at the point (0,4,0) than the point (0,0,2)." is False as both the points have the same magnetic field. Limit of 150 words has been exceeded.

Given information: An infinite length line along the X-axis conducting current. The magnetic field resulting from this line is greater at the point (0,4,0) than the point (0,0,2).To determine whether the given statement is true or false, we will apply Biot-Savart's law. Biot-Savart's law gives the magnetic field B at a point due to a current-carrying conductor. Let's assume that the current-carrying conductor is located at x = a and carries a current I in the positive x-direction. The point where we want to find the magnetic field B is located at a point (x, y, z) in space. According to Biot-Savart's law [tex]:$$\vec{B} = \frac{\mu_{0}}{4\pi}\int\frac{I\vec{dl}\times\vec{r}}{r^3}$$.[/tex] Here,[tex]$\vec{dl}$[/tex] is a length element on the conductor [tex]$\vec{r}$[/tex] is the position vector from the length element [tex]$dl$[/tex] to the point where we want to find the magnetic field  is the magnetic constant. In the given problem, we have a current-carrying conductor along the X-axis. Thus, we can assume that the current-carrying conductor lies along the line [tex]$x = a$[/tex]. We have to determine whether the magnetic field at (0, 4, 0) is greater or (0, 0, 2) is greater.

To find the magnetic field at each point, we have to calculate the position vector [tex]\(\vec{r}\)[/tex] and the vector [tex]\(d\vec{l}\)[/tex] from the conductor at position [tex]\(x = a\)[/tex]to the point where we want to find the magnetic field. To simplify our calculations, we can assume that the current-carrying conductor has a current of [tex]\(I = 1\)[/tex] A. We can then calculate the magnetic field at each point by using the formula derived above. The position vector [tex]\(\vec{r}\)[/tex] from the current-carrying conductor to the point [tex]\((0, 4, 0)\)[/tex] is:

[tex]\(\vec{r} = \begin{pmatrix}0 - a \\ 4 - 0 \\ 0 - 0 \end{pmatrix} = \begin{pmatrix}-a \\ 4 \\ 0 \end{pmatrix}\)[/tex]

The position vector [tex]\(\vec{r}\)[/tex] from the current-carrying conductor to the point \((0, 0, 2)\) is:

[tex]\(\vec{r} = \begin{pmatrix}0 - a \\ 0 - 0 \\ 2 - 0 \end{pmatrix} = \begin{pmatrix}-a \\ 0 \\ 2 \end{pmatrix}\)[/tex][tex]\((0, 4, 0)\)[/tex]

The length element [tex]\(d\vec{l}\)[/tex] on the conductor at position[tex]\(x = a\)[/tex] can be taken as [tex]\(dx\hat{i}\)[/tex] since the current is flowing in the positive x-direction. Substituting the values of [tex]\(\vec{r}\) and \(d\vec{l}\)[/tex]in Biot-Savart's law, we get:

[tex]\(\vec{B} = \frac{\mu_{0}}{4\pi}\int\frac{I d\vec{l} \times \vec{r}}{r^3}\)\(= \frac{\mu_{0}}{4\pi}\int_{-\infty}^{\infty}\frac{I(dx\hat{i})\times(-a\hat{i} + 4\hat{j})}{\sqrt{a^2 + 16}^3}\)\(= \frac{\mu_{0}}{4\pi}\int_{-\infty}^{\infty}\frac{-4I dx\hat{k}}{\sqrt{a^2 + 16}^3}\)[/tex]

Since the magnetic field is in the [tex]\(\hat{k}\)[/tex] direction, we have only kept the [tex]\(\hat{k}\)[/tex]component of the cross product [tex]\(d\vec{l}[/tex] \times [tex]\vec{r}\).[/tex] Evaluating the integral, we get:

[tex]\(\vec{B} = \frac{\mu_{0}}{4\pi}\left[\frac{-4I x\hat{k}}{\sqrt{a^2 + 16}^3}\right]_{-\infty}^{\infty} = 0\)[/tex]

The magnetic field at both points [tex]\((0, 4, 0)\)[/tex] and [tex]\((0, 0, 2)\)[/tex] is zero. Hence, the given statement is false as both points have the same magnetic field.

To know more about magnetic field click here:

https://brainly.com/question/14848188

#SPJ11

In an elastic collision, the total momentum and total kinetic energy of the system are conserved. Initially, block 2 is at rest, so its momentum is zero.

Using the conservation of momentum, we can write the equation: m1v1_initial = m1v1_final + m2v2_final, where v1_initial is the initial velocity of block 1, v1_final is its final velocity, and v2_final is the final velocity of block 2.

Since the collision is elastic, the total kinetic energy before and after the collision is conserved. We can write the equation: 0.5m1v1_initial^2 = 0.5m1v1_final^2 + 0.5m2v2_final^2.

From these equations, we can solve for v1_final and v2_final in terms of the given masses and initial velocity.

After the collision, both blocks slide into a region with kinetic friction. The deceleration due to friction is given by a = μg, where μ is the coefficient of kinetic friction and g is the acceleration due to gravity.

To find the distance traveled, we can use the equation of motion: v_final^2 = v_initial^2 + 2ad, where v_final is the final velocity (zero in this case), v_initial is the initial velocity, a is the deceleration due to friction, and d is the distance traveled.

Using the calculated final velocities, we can solve for the distance traveled by each block (block 1 and block 2) in the friction region.

By plugging in the given values and performing the calculations, we can determine the distances traveled by block 1 and block 2 into the friction region.

Learn more about acceleration here:

https://brainly.com/question/30660316

#SPJ11

(a) The speed of the bead at point A is 6.47 m/s.

(b) The normal force on the bead at point A is 2.49 N

(c) The minimum height h from which the bead can be released is 5R/2.

(a)

Use the conservation of energy principle.

The initial energy, when the bead is released from rest at a height h = 3.60R, is entirely due to its potential energy.

The final energy of the bead at point A is entirely due to its kinetic energy, since it is sliding without friction around the loop-the-loop.

Let M be the mass of the bead and v be its velocity at point A, then we have:

Mgh = 1/2MV² + MgR

where g is the acceleration due to gravity, and h = 3.60R is the height from which the bead is released.

Simplifying and solving for v gives:

v = sqrt(2gh - 2gR)

where sqrt() stands for square root.

Substituting the values of g and R gives:

v = sqrt(2*9.81*3.6 - 2*9.81*1)

v = 6.47 m/s

Therefore, the speed of the bead at point A is 6.47 m/s.

(b)

To find the normal force on the bead at point A, we need to consider the forces acting on the bead at this point.

The normal force is the force exerted by the wire on the bead perpendicular to the wire. It balances the force of gravity on the bead.

At point A, the forces acting on the bead are the force of gravity acting downwards and the normal force acting upwards.

Since the bead is moving in a circular path, it is accelerating towards the center of the loop.

Therefore, there must be a net force acting on it towards the center of the loop.

This net force is provided by the component of the normal force in the direction towards the center of the loop.

This component is given by:

Ncosθ = MV²/R

where θ is the angle between the wire and the vertical, and N is the normal force.

Substituting the values of M, V, and R gives:

Ncosθ = 5.50*10⁻³*(6.47)²/1

Ncosθ = 2.49

Therefore, the normal force on the bead at point A is 2.49 N.

(c)

The bead will lose contact with the wire at the top of the loop when the normal force becomes zero.

This occurs when the component of the force of gravity acting along the wire becomes equal to the centripetal force required to keep the bead moving in a circular path.

The component of the force of gravity along the wire is given by:

Mg sinθ = MV²/R

where θ is the angle between the wire and the vertical, and Mg is the force of gravity acting downwards.

Substituting the values of M, V, and R gives:

Mg sinθ = 5.50*10⁻³*(6.47)²/1

Mg sinθ = 0.789

Since sinθ can never be greater than 1, we have:

Mg sinθ ≤ Mg

The minimum height h from which the bead can be released is obtained by equating the potential energy of the bead at this height to the kinetic energy required to keep the bead moving in a circular path at the top of the loop.

This gives:

Mgh = 1/2MV² + MgR

Substituting V² = gR and simplifying gives:

h = 5R/2

Therefore, the minimum height h from which the bead can be released is 5R/2.

Learn more about the normal force:

brainly.com/question/29458258

#SPJ11

The task is to determine the resultant of three vectors: 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S]. A vector diagram will be drawn to visually represent the vectors, and the resultant will be determined by vector addition.

To determine the resultant of the given vectors, we will first draw a vector diagram. Each vector will be represented by an arrow with the appropriate magnitude and direction. The given magnitudes and directions are 75 m/s [South], 105 m/s [N 70° E], and -100 m/s [E 35° S].

To add the vectors, we start by placing the tail of the second vector at the head of the first vector. Then, we place the tail of the third vector at the head of the resultant of the first two vectors. The resultant vector is the vector that connects the tail of the first vector to the head of the third vector.

By measuring the magnitude and direction of the resultant vector using a ruler and protractor, we can determine its values. The magnitude represents the length of the vector, and the direction represents the angle with respect to a reference direction, usually the positive x-axis.

Once the resultant vector is determined, it can be labeled and stated. The label indicates the magnitude and units of the resultant vector, and the statement indicates the direction of the resultant vector, usually relative to a reference direction or in terms of cardinal directions.

By following this process and accurately drawing the vector diagram, we can determine the resultant of the given vectors.

Learn more about three vectors here:

https://brainly.com/question/29028487

#SPJ11

The peak current (I) at this frequency is approximately 1.04 A and the phase angle (∅) is approximately -63.69 degrees.

Part A:

First, let's calculate the reactance values:

The inductive reactance (XL) can be calculated using the formula:

XL = 2πfL

Substituting the given values:

XL = 2π * 60 * 0.10 = 37.68 Ω

The capacitive reactance (XC) can be calculated using the formula:

XC = 1 / (2πfC)

Substituting the given values:

XC = 1 / (2π * 60 * 20 * 10^(-6)) = 132.68 Ω

Next, let's calculate the impedance (Z):

Z = √(R^2 + (XL - XC)^2)

Substituting the given values:

Z = √(65^2 + (37.68 - 132.68)^2) = √(4225 + (-95)^2) = √(4225 + 9025) = √13250 ≈ 115.24 Ω

Now, we can calculate the peak current (I):

I = V / Z

Substituting the given voltage value:

I = 120 / 115.24 ≈ 1.04 A

Therefore, the peak current (I) at this frequency is approximately 1.04 A.

Part B:

To find the phase angle (∅), we can use the formula:

∅ = tan^(-1)((XL - XC) / R)

Substituting the calculated values:

∅ = tan^(-1)((37.68 - 132.68) / 65) ≈ -63.69°

Therefore, the phase angle (∅) is approximately -63.69 degrees.

Learn more about current: https://brainly.com/question/1100341

#SPJ11

The Power Factor of the circuit is given by the ratio of true power and apparent power. Therefore, the Average Power Delivered to the Circuit now is 89.443 W.

R = 69.8 ΩC = 64.2 μFVRMS = 102 VFrequency, f = 117 Hz1.

Power Factor: The Power Factor of the circuit is given by the ratio of true power and apparent power.

PF = P/ SHere,P = VRMS2/RVRMS = 102 VResistance, R = 69.8 ΩS = VRMS/I => I = VRMS/R = 102/69.8 = 1.463

AApparent Power, S = VRMS x I = 102 x 1.463 = 149.286 W. True Power, P = VRMS²/R = 102²/69.8 = 149.408 W. Thus, the Power Factor of the circuit is PF = P/S = 149.408/149.286 = 1.0008195 or 1.0008 (approx)2.

The average power delivered to the circuit is given by the formula P avg = VRMS x I x cosΦcosΦ is the phase angle between current and voltage

Here, cosΦ = R/Z Where, Z = Impedance = √(R² + X²)Resistance, R = 69.8 ΩCapacitive Reactance, Xc = 1/(2πfC) = 1/(2π x 117 x 64.2 x 10⁻⁶) = - 223.753 Ω (Negative because it is capacitive)Z = √(R² + Xc²) = √(69.8² + (-223.753)²) = 234.848 ΩcosΦ = R/Z = 69.8/234.848 = 0.297Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.297 = 44.56 W3.

Power Factor when the Capacitor is replaced by Inductor. When the Capacitor is replaced by Inductor, then the circuit becomes a purely resistive circuit with inductance (L).

Hence, the Power Factor will be 1.Power Factor = 1.4. Average Power Delivered to the Circuit Now

Now, the circuit is purely resistive with inductance (L).

Hence, the Average Power delivered to the circuit can be calculated using the same formula , Pavg = VRMS x I x cosΦ

Here, cosΦ = R/Z Where, Z = √(R² + X²)Resistance, R = 69.8 ΩInductive Reactance, XL = 2πfL = 2π x 117 x 0.132 = 98.518 ΩZ = √(R² + XL²) = √(69.8² + 98.518²) = 120.808 ΩcosΦ = R/Z = 69.8/120.808 = 0.578

Thus, Pavg = VRMS x I x cosΦ= 102 x 1.463 x 0.578 = 89.443 W

Therefore, the Average Power Delivered to the Circuit now is 89.443 W.

Learn more about Power Factor here:

https://brainly.com/question/31260332

#SPJ11