When a network has been crashed to the point where all activities are critical, additional crashing a) is unnecessary.
When a network has been crashed to the point where all activities are critical, it means that all the activities in the network are essential to the project's completion, and any further reduction in their duration could be detrimental to the project's success. In such a scenario, additional crashing is unnecessary because all the activities have already been compressed to their minimum duration. Furthermore, it may be impossible to crash the network further because the critical path is already compressed to the maximum. Any additional crashing may require crashing multiple tasks simultaneously, which can increase the project's risk and complexity.
In conclusion, when a network has been crashed to the point where all activities are critical, additional crashing may not be necessary, may be impossible, may require crashing multiple tasks simultaneously, may be prohibitively expensive, and may reduce the project's quality. Therefore, project managers should assess the risks and benefits before deciding to crash the network further. Therefore, option A is correct.
Know more about Network here :
https://brainly.com/question/1027666
#SPJ11
Which OSI layer is where node-to-node transfer occurs? (5 points)
Application
Data link
Transport
Session
Transfer from one node to another takes place at the OSI data link layer.
What is data link layer and what are some examples?A program's data link layer controls how data is transferred into and out of a physical link in a network. In the Open Systems Interconnection (OSI) architecture paradigm, the data link layer is represented as Layer 2 for a collection of communication protocols.Ethernet, the IEEE 802.11 WiFi protocols, ATM, and Frame Relay are a few examples of data link technologies. The data link layer functionality in the Internet Protocol Suite (TCP/IP) is located within the link layer, the lowest descriptive model layer that is presumptively independent of physical infrastructure. The Data Link Layer offers the operational and procedural means for data transfer between network entities as well as for the detection and potential correction of any mistakes that might arise in the physical layer.To learn more about Data Link Layer, refer to:
https://brainly.com/question/13439307
true or false? authentication by characteristics/biometrics is based on something you have, such as a smart card, a key, a badge, or either a synchronous or asynchronous token. group of answer choices
False. Authentication by characteristics/biometrics is based on something you are, such as fingerprints, facial recognition, or voice recognition. What you mentioned, like a smart card, key, badge, or token, is referred to as possession-based authentication.
Authentication by characteristics/biometrics is based on something you have, such as a smart card, a key, a badge, or either a synchronous or asynchronous token.
Learn more about authentication: brainly.com/question/31009047
#SPJ11
g to execute code after a jquery effect has finished, you can use group of answer choices a callback function a global function a local function a parameterless function
To execute code after a jQuery effect has finished, you can use a callback function.
What is a callback function?A callback function is a function that is passed as an argument to another function and is then called inside the outer function. When the outer function has finished executing, the callback function is called. This is useful when you need to execute some code only after a certain event has occurred or a certain action has been completed.In this case, we want to execute code after a jQuery effect has finished. The jQuery effect is the outer function, and the callback function is the function that we want to execute after the effect has finished. Here is an example of how to use a callback function with jQuery:```
$("button").click(function(){
$("p").hide("slow", function(){
alert("The paragraph is now hidden");
});
});
```In this example, when the button is clicked, the paragraph will be hidden slowly using the `hide()` function. The second argument to the `hide()` function is the callback function that we want to execute after the paragraph has been hidden. This callback function simply displays an alert message saying that the paragraph is now hidden.
Learn more about callback function here:
https://brainly.com/question/28936391
#SPJ11
5 Select the correct answer. What type of language is Objective-C? O A. command language OB. markup language C. object-oriented language D. logic language Reset Nex
For Apple's macOS and iOS operating systems, Objective-C is largely utilised as an object-oriented programming language.
What does "object-oriented language" mean?OOPs, or object-oriented programming, is essentially a methodology for creating software. It was created to address the reusability and maintainability issues with procedural programming techniques. OOPs is a technique for creating applications that use classes and objects.
Why is an object-oriented language called that?An entity that exists in the real world is referred to as an object in the dictionary, and the word "oriented" denotes "interested in a certain kind of thing or entity." OOP, often known as object-oriented programming, is a programming pattern that is centred around objects or entities.
To know more about software visit:-
https://brainly.com/question/985406
#SPJ9
An element in a 2D list is a ______
Answer:A two dimensional array I think..
Explanation:
ifs it isn’t right sorry <\3
An element in a 2D list is a two dimensional array as when it is using for loops to iterate through a 2D list, the outer loop accesses the rows.
What is the outer loop?The outer loop iterates over each row of the 2D list, while the inner loop iterates over each element in that row. This allows you to access and manipulate each element of the 2D list one at a time, making it easier to perform operations or calculations on the data in the list.
By iterating through the rows first, you can ensure that each element of the list is accessed in the correct order and that all data is processed or analyzed correctly.
Therefore, An element in a 2D list is a two dimensional array as when it is using for loops to iterate through a 2D list, the outer loop accesses the rows.
Learn more about outer loop on:
https://brainly.com/question/27994811
#SPJ2
write a query which lists the first name and last name of subjects who at least completed one of the surveys and sorted the results by last name in ascending order.
This query selects the first_name and last_name columns from the subjects table where the survey_completed value is 1, and orders the results by last_name in ascending order.
To write a query that lists the first name and last name of subjects who have completed at least one of the surveys, and sort the results by last name in ascending order, follow these steps:
1. Identify the table containing the relevant information (e.g., subjects, surveys, survey_responses).
2. Determine which columns contain the required data (e.g., first_name, last_name, survey_completed).
3. Write a SELECT statement to retrieve the required data.
4. Use a WHERE clause to filter the results based on the completion of at least one survey.
5. Use an ORDER BY clause to sort the results by last name in ascending order.
Assuming your table is named "subjects" and the column "survey_completed" has a value of 1 for completed surveys, your query would look like this:
```sql
SELECT first_name, last_name
FROM subjects
WHERE survey_completed = 1
ORDER BY last_name ASC;
```
Learn more about query: brainly.com/question/30622425
#SPJ11
(financial application: compute the future investment value) write a method that computes future investment value at a given interest rate for a specified number of years. the future investment is determined using the formula in programming exercise 2.21. use the following method header: public static double futureinvestmentvalue(double investmentamount, double monthlyinterestrate, int years) for example, futureinvestmentvalue(10000, 0.05/12, 5) returns 12833.59. write a test program that prompts the user to enter the investment amount (e.g., 1000) and the interest rate (e.g., 9%) and prints a table that displays future value for the years from 1 to 30, as shown below: the amount invested: 1000 annual interest rate: 9 years future value 1 1093.80 2 1196.41 ... 29 13467.25 30 14730.57 class name: exercise06 07
This problem requires us to write a method that calculates the future Investment value, and a test program that prompts the user for inputs and displays a table of future values. By using the formula and the method header provided, we can solve this problem easily.
To solve this problem, we need to write a method called "futureinvestmentvalue" that calculates the future value of an investment given the investment amount, monthly interest rate, and the number of years. The formula to compute the future investment value is given in programming exercise 2.21.
The method header should be defined as public static double futureinvestmentvalue(double investmentamount, double monthlyinterestrate, int years). This method will take in the investment amount, monthly interest rate and the number of years as parameters, and return the future investment value as a double.
We also need to write a test program that prompts the user to enter the investment amount and interest rate, and displays a table of future values for the years from 1 to 30. The class name for this program could be "exercise06_07".
To calculate the future investment value, we need to use the formula: futurevalue = investmentamount * (1 + monthlyinterestrate)^(years*12)
In the test program, we can use a for loop to iterate over the years and calculate the future value for each year. We can display the result in a table format using printf statement. The table should include the investment amount, interest rate, and future value for each year from 1 to 30.
To convert the interest rate entered by the user into monthly interest rate, we can divide it by 1200. For example, if the interest rate entered is 9%, we can convert it to monthly interest rate by dividing it by 1200, which gives 0.0075.
Overall, this problem requires us to write a method that calculates the future investment value, and a test program that prompts the user for inputs and displays a table of future values. By using the formula and the method header provided, we can solve this problem easily.
To Learn More About Investment
https://brainly.com/question/15544151
#SPJ11
a data analyst team is reviewing an old project and needs to understand how the files naming conventions are structured. where should the team locate this information?0 / 1 pointin sqlin the metadatain the folder hierarchiesin the aggregated data
One should be concise and not provide extraneous amounts of detail. One should not ignore any typos or irrelevant parts of the question.Metadata is data that provides information about other data.
Metadata is a set of data that describes and provides information about other data. Data and metadata work together to create a complete picture of a given subject.Metadata is frequently utilized in library and database systems to manage the storage, discovery, and sharing of data. The way files naming conventions are structured is given in metadata. The metadata is where the team should search for the files naming conventions.Metadata is a good place to look for information about the data. A data analyst team is analyzing an old project and needs to know how the files naming conventions are structured. The team should look in the metadata for this information.Most data management systems enable users to store metadata about their data. This metadata can be as basic as a document's name or as complicated as a complete record of its history, usage, and lineage.For such more question on Metadata
https://brainly.com/question/14960489
#SPJ11
Given main() and gvcoin class, complete function consecutive_heads() that counts and returns the number of flips taken to achieve a desired number of consecutive heads without a tails. function consecutive_heads() has a gvcoin object and an integer representing the desired number of consecutive heads without a tails as parameters.
note: for testing purposes, a gvcoin object is created in the main() function using a pseudo-random number generator with a fixed seed value. the program uses a seed value of 15 during development, but when submitted, a different seed value will be used for each test case.
ex: if the gvcoin object is created with a seed value of 15 and the desired number of consecutive heads is 5, then the function consecutive_heads() returns 16 and the program outputs:
Answer:
Here is a possible implementation of the consecutive_heads() function based on the given instructions:
Explanation:
#include <iostream>
#include <cstdlib>
#include <ctime>
class gvcoin {
public:
gvcoin();
bool flip();
private:
int heads_in_a_row;
};
gvcoin::gvcoin() {
heads_in_a_row = 0;
std::srand(std::time(nullptr)); // seed the random number generator
}
bool gvcoin::flip() {
bool is_heads = std::rand() % 2; // generate a random 0 or 1
if (is_heads) {
heads_in_a_row++;
} else {
heads_in_a_row = 0;
}
return is_heads;
}
int consecutive_heads(gvcoin coin, int num_heads) {
int num_flips = 0;
while (coin.heads_in_a_row < num_heads) {
coin.flip();
num_flips++;
}
return num_flips;
}
int main() {
const int SEED = 15;
std::srand(SEED);
gvcoin coin;
int num_heads = 5;
int num_flips = consecutive_heads(coin, num_heads);
std::cout << "It took " << num_flips << " flips to get " << num_heads << " consecutive heads." << std::endl;
return 0;
}
what is the internet protocol? what are the principal components of the ipv4 protocol (check all that apply)? sdn controller protocols. icmp (internet control message protocol) packet handling conventions at routers (e.g., segmentation/reassembly) ipv4 addressing conventions. routing algorithms and protocols like ospf and bgp. ipv4 datagram format.
The internet protocol is a set of rules used to govern the transmission of information over the internet. IPv4 protocol includes the following: IPv4 protocol ICMP (internet control message protocol) packet handling conventions.
Explain the internet protocol and components of the ipv4 protocol?The internet protocol is a set of rules used to govern the transmission of information over the internet. IPv4 protocol, IPv4 addressing conventions, and ICMP (internet control message protocol) packet handling conventions at routers are the primary components of the internet protocol. The principal components of the IPv4 protocol include the following: IPv4 protocol ICMPP (internet control message protocol) packet handling conventions at routers IPv4 addressing conventions IPv4 data-gram format Routing algorithms and protocols such as OSPF and BGP The above-mentioned protocols are used to regulate the internet's functioning, including IP addressing, network identification, packet routing, and more.
Learn more about ipv4 protocol
brainly.com/question/30497704
#SPJ11
what does the following uml diagram entry mean? setheight(h : double) : void group of answer choices this is a private method with no parameters and returns a double data type. this is a private attribute named height and is a double data type. this is a public attribute named height and is a double data type. this is a public method with a parameter of data type double and does not return a value.
The entry does not imply that it's a private method with no Parameters and returns a double data type, nor that it's a private or public attribute named height with a double data type.
The UML diagram entry you provided, "setHeight(h : double) : void", represents a public method with a parameter of data type double and does not return a value.
Here's a breakdown of the entry:
1. "setHeight": This is the name of the method, which follows the naming convention for a setter method, indicating that it sets the value of an attribute, in this case, height.
2. "(h : double)": This part denotes a single parameter for the method, named 'h', which is of the data type 'double'. This parameter is used to set the value of the height attribute.
3. ": void": This indicates the return type of the method. 'void' means that the method does not return any value.
The entry does not imply that it's a private method with no parameters and returns a double data type, nor that it's a private or public attribute named height with a double data type. It correctly represents a public method with a double parameter and no return value.
To Learn More About Parameters
https://brainly.com/question/30384148
SPJ11
which of the following can a mining pool operator do? (assume pool operator has < 50% of total network hash power.) group of answer choices decide which transactions to include decide how to pay the pool members decide how much reward per block to earn set the reward payout address block transactions from being confirmed
Mining pool operators cannot decide which transactions to include or block transactions from being confirmed. These decisions are made by the miners in the pool collectively.
A mining pool operator can do the following if they have less than 50% of the total network hash power:decide how to pay the pool membersdecide how much reward per block to earnset the reward payout addressA mining pool operator is an individual or a group of individuals that work together to mine cryptocurrencies. The mining pool operator allows users to connect their mining hardware to the pool and work together to mine blocks. The rewards earned from mining are then distributed among the members of the pool based on their contribution.Mining pool operators can decide how to pay the pool members and how much reward per block to earn. They can also set the reward payout address where the rewards earned are sent.
Learn more about transactions here:
https://brainly.com/question/29428650
#SPJ11
dan, a network administrator, gets an email from the ceo. she is upset because people keep talking over each other on conference calls. which option best describes dan's first step to remedy this problem? answer check to see if the voip server is in the cloud. hold a telephone etiquette training course for upper management. check the latency configuration. latency under 250 milliseconds is not recommended. check the latency configuration. latency should be set between 75 and 150 milliseconds.
Dan's first step to remedy the conference call issue is to check the latency configuration on the VoIP server. The ideal latency setting should be between 75 and 150 milliseconds for optimal audio quality and to prevent people from talking over each other.
Based on the given options, the best course of action for Dan, the network administrator, is to:
1. Check the latency configuration on the VoIP server.
Latency is an important factor in the quality of audio during conference calls, as it affects the time it takes for the audio to be transmitted between participants. Ideally, latency should be set between 75 and 150 milliseconds. Latency under 250 milliseconds is not recommended, as it can lead to poor audio quality and people talking over each other.
Here's a concise version of the answer:
Dan's first step to remedy the conference call issue is to check the latency configuration on the VoIP server. The ideal latency setting should be between 75 and 150 milliseconds for optimal audio quality and to prevent people from talking over each other.
To Learn More About VoIP
https://brainly.com/question/29484709
SPJ11
you're building a new network for a small financial services startup company. security is paramount, so each organization within the company will have their own network segments separated by routers. funds are limited, and you've been asked to keep costs to a minimum. you've acquired a used fiber optic switch, and you want to use it to create a fiber optic backbone that interconnects all of the routers. you've purchased several used multi-mode gbic modules on ebay that you'll install on each router to allow them to connect to the switch. both the switch and the gbic modules use mtrj connectors. you've purchased several used 1-meter, multi-mode patch cables from amazon. but when they arrived, you noticed that they use lc connectors. fortunately, with some force, you found that you're able to get the lc connectors on the cables to lock into the mtrj connectors on the gbic modules and on the switch. will this implementation work?
The implementation you described may not work reliably due to the use of mismatched connectors (LC and MTRJ). While you were able to force the LC connectors into the MTRJ connectors, this is not a recommended practice as it can result in poor connection quality and potential damage to the connectors or equipment.
1)To create a secure and reliable fiber optic backbone for your small financial services startup company, it's important to use the proper components and connections. Mixing and matching different types of connectors can lead to performance issues and security vulnerabilities.
2)Instead of forcing the LC connectors into the MTRJ connectors, consider purchasing the appropriate MTRJ to MTRJ multi-mode patch cables to ensure a proper connection between the routers and the fiber optic switch. This will not only help maintain the performance and reliability of your network but also ensure the security that your company requires.
3)In summary, using mismatched connectors can lead to unreliable connections and potential security risks. To achieve a secure and reliable network, it's best to invest in the appropriate components, such as MTRJ to MTRJ multi-mode patch cables, to interconnect your routers and fiber optic switch.
For such more question on implementation
https://brainly.com/question/29694819
#SPJ11
describe the possible problems resulting from the limitations in the resources in a computer system.
Performance degradation,Data loss,Security issues.
Describe the possible problems resulting from the limitations?
A computer system's limitations in resources can cause a variety of problems. The following are some of the potential problems that may arise:
Performance degradation:
When a system is low on resources, it may begin to slow down or become unresponsive. Programs may take longer to load, and simple tasks may take longer to complete.
Program crashes: Programs may become unstable and crash more frequently if there are insufficient system resources. This may cause data loss, and the program may be unable to recover from the crash.
Data loss:
If a program crashes, any data that was not saved may be lost. If the system runs out of memory or storage, data may be lost. This may result in critical files becoming inaccessible.
System errors: When a system lacks resources, it may generate error messages. These messages can be vague and difficult to interpret, making troubleshooting more difficult. Some errors may cause the system to stop working entirely.
Security issues:
When a system lacks resources, it may become more vulnerable to security threats. For example, an attacker could exploit a vulnerability in a program that has crashed and is not functioning correctly. Alternatively, the system may not have the resources to run security software, leaving it unprotected.
Learn more about troubleshooting.
brainly.com/question/30048504
#SPJ11
can u give me 3 principle of design and explain and write with paragraph?
Answer:
There are twelve basic principles of design: contrast, balance, emphasis, proportion, hierarchy, repetition, rhythm, pattern, white space, movement, variety, and unity.
buffers are added to the network where noncritical paths merge with the critical chain. these buffers protect the critical chain from being delayed. multiple choice question.
Buffers are time reserves added to each stage of the critical chain, and they ensure that the project remains on schedule. Buffers are incorporated into a project schedule to secure the timely delivery of project stages.
The buffers are added to the network where non-critical paths merge with the critical chain to protect the critical chain from being delayed. This is a true statement. The critical chain is the longest path of the project network, and it determines the completion date of the project. In contrast, non-critical paths are those that are not vital for the project completion. It gives additional time to complete the critical chain by using time reserved on other chains. Buffers safeguard against inevitable issues such as workmanship and supply chain. Buffers are found in two places, feeding and project completion buffers. Feeding buffers are employed to protect critical chain stages from disruptions that are likely to occur as a result of variation in previous tasks. Feed buffers are used in tasks that are fed by a single task. Project completion buffers, on the other hand, are used to protect the whole critical chain from unforeseen delays in any of its stages. The answer is, "true".
Learn more about critical chain here:
https://brainly.com/question/31218520
#SPJ11
if the mystruct type is implemented such that a deep copy is made upon initializing an mystruct object with an object of the same type, what is the output of this program?
If the `mystruct type` is implemented such that a deep copy is made upon initializing a `mystruct object` with an object of the same type, the output of the program would depend on the code in the program that utilizes the `mystruct` type.
Without the code, it is not possible to determine the output of the program. What is a deep copy?A deep copy is a copy of a `mystruct` object that creates a new object with a new memory location, and all the members of the original object are duplicated in the new object. This implies that if a change is made to the original object after it has been copied, the new copy will not be impacted in any way. On the other hand, a shallow copy is a copy of an object that refers to the same memory location as the original object; therefore, any changes made to the original object will be reflected in the new object as well.
Learn more about program here:
https://brainly.com/question/11023419
#SPJ11
when creating an email template to confirm a meeting with someone, how would you include the time the meeting was scheduled for? personalization tokens fill-in-the-blank areas static text none of the above
When creating an email template to confirm a meeting with someone, you can include the time the meeting was scheduled for by using fill-in-the-blank areas or personalization tokens. These allow you to easily input specific details like the meeting time for each recipient.
When creating an email template to confirm a meeting with someone, you can include the time the meeting was scheduled for using personalization tokens.What is a personalization token?A personalization token is a dynamically generated placeholder that is used to insert specific data into an email message. Personalization tokens are used to provide a more personalized experience for recipients of email messages, which can increase the effectiveness of email marketing campaigns.By using personalization tokens, you can easily include information about the time and date of the scheduled meeting in your email template to confirm the meeting with someone. This information can be automatically filled in based on the details of the scheduled meeting, making it easy for you to send personalized and professional emails quickly and efficiently.
Learn more about email template here: brainly.com/question/30435388
#SPJ11
your windows computer can be brought to the state it was in when it came to you from the factory with a utility called
The utility to bring your Windows computer back to the state it was in when it came from the factory is called "System Restore" or the "Reset this PC" feature.
A Windows computer can be brought back to the state it was in when it came to you from the factory with a utility called System Restore. What is System Restore? System Restore is a program in Microsoft Windows that enables users to restore their computers to a prior state. System restore points are created before important events like software updates and app installations on a computer. System restore returns the PC to the condition it was in when the restore point was created. It's possible that a restore point was created before your computer's problem began, allowing you to return to that state. System Restore is also helpful in repairing Windows when it doesn't start normally. However, it's critical to note that any installed apps and updates will be removed if you use this option. System Restore does not erase any files from the computer. Hence, the answer is System Restore.
visit here to learn more about Windows:
https://brainly.com/question/28525121
#SPJ11
how are entity constraints implemented? group of answer choices key attributes domain constraints foreign keys data types of attributes
Entity constraints are implemented using key attributes, domain constraints, foreign keys, and data types of attributes.
About entity constraintEntity constraints are implemented in several ways, which are explained below:
1. Key attributes: Every entity can have one or more attributes that are designated as key attributes. Key attributes have unique values for each entity instance, and they can be used to specify entity integrity constraints.
2. Domain constraints: Domain constraints define the permissible values for an attribute.
3. Foreign keys: A foreign key is an attribute that corresponds to the primary key of another entity.
4. Data types of attributes: Data types of attributes should be selected so that they can accurately represent the data being stored. They can also help to enforce entity constraints.
Thus, entity constraints can be implemented using key attributes, domain constraints, foreign keys, and data types of attributes.
Learn more about entity constraint at
https://brainly.com/question/31168706
#SPJ11
if client code is traversing a list by repeatedly using a get method and the underlying structure is a linked chain. the efficiency of traversal is:
If the client code is traversing a list by repeatedly using a get method and the underlying structure is a linked chain, the efficiency of traversal is O(n).A linked chain is a data structure that is implemented using nodes or objects in a computer program.
Each node includes two fields: a data field and a reference to the next node in the sequence. As a result, nodes are linked together in a chain, with each node pointing to the next one until the end of the chain is reached.What is traversal?In computer science, traversal refers to the process of visiting each element in a data structure, such as a tree or a linked list, in a specific order. This operation can be carried out in several ways, including depth-first traversal, breadth-first traversal, and others.A get method is a type of method in object-oriented programming that is used to retrieve or return the value of an client code instance variable. Get methods, often known as accessor methods, are typically used to retrieve data that is otherwise inaccessible due to encapsulation in object-oriented programming.
Learn more about client code here:
https://brainly.com/question/29308166
#SPJ11
how does linear search work? linear search traverses an array until the desired value is found, or until the end of the array. linear search traverses an array from the last value to the first value until the desired value is found. linear search uses a while loop to traverse an array for the desired value, or until the end of the array. linear search searches for desired values by searching the the next highest value in an array, and seeing if that is the desired value.
Linear search is a simple search algorithm that works by traversing an array from the first element to the last element or until the desired value is found.
Explain the working of Linear Search.The linear search algorithm starts at the beginning of the array and compares the first element to the desired value. If the first element is the desired value, the search is complete. If the first element is not the desired value, the algorithm moves on to the second element and compares it to the desired value. This process continues until the desired value is found or until the end of the array is reached.
If the desired value is not found in the array, the linear search algorithm will return a value indicating that the desired value was not found.
Linear search can be used on unsorted and sorted arrays, but it is most efficient on small arrays or when the desired value is close to the beginning of the array. In general, for larger arrays or when performance is critical, other search algorithms such as binary search or hash table lookups are preferred.
To learn more about Linear search, visit:
https://brainly.com/question/15178888
#SPJ1
mrs. polly thinks one of her students has downloaded some software that she believes will harm the school computers. what type of software does mrs. polly think was downloaded?
As per the question, "Mrs. Polly thinks one of her students has downloaded some software that she believes will harm the school computers. What type of software does Mrs. Polly think was downloaded?" Mrs. Polly thinks that malicious software was downloaded that can harm school computers.
Malware is a type of software that is designed to damage or disrupt computer systems. Malware is also known as malicious software. It is software that is designed to harm a computer system, network, or mobile device. It can be introduced to a computer system in several ways, such as through emails, instant messages, or downloads from the internet.There are several types of malware that can harm a computer system. Some common types of malware are as follows:Viruses Worms Trojan horses Ransomware Spyware Adware Botnets Rootkits Keyloggers Backdoors. Mrs. Polly thinks that one of her students has downloaded a type of malware that can harm school computers. She may have noticed suspicious behavior on one of the computers, such as slower performance or strange pop-up messages, which indicates that malware may be present. She should investigate the matter further and take steps to remove the malware from the computer before it can cause any further damage.For such more question on Malware
https://brainly.com/question/399317
#SPJ11
which nec article covers premises-powered optical fiber-based broadband communications systems that provide any combination of voice, video, data, and interactive services through an optical network terminal?
In NEC, Article 840 covers premises-powered optical fiber-based broadband communications systems that provide any combination of voice, video, data, and interactive services through an optical network terminal (ONT).
The National Electrical Code (NEC) is a regionally adoptable standard for the safe installation of electrical wiring and equipment in the United States. It is part of the National Fire Codes series that is published by the National Fire Protection Association (NFPA).
An optical network terminal (ONT) is a piece of customer premises equipment (CPE) that connects to an optical network that provides Ethernet services to end users. The ONT converts optical signals to electrical signals and vice versa. It offers a high-speed internet connection, as well as phone and video services.
You can learn more about National Electrical Code (NEC) at: brainly.com/question/30757813
#SPJ11
why is selecting computer hardware and software for the organization an important management decision? what management, organization, and technology issues should be considered when selecting computer hardware and software?
Selecting computer hardware and software for an organization is an important management decision because it impacts the efficiency, productivity, and overall success of the organization.
The right technology can streamline processes, reduce costs, and enable growth.
When selecting computer hardware and software, management should consider:
1. Organization requirements: Determine the specific needs of the organization, such as processing power, storage capacity, and software functionality.
2. Compatibility: Ensure that the hardware and software are compatible with existing systems and can be easily integrated into the organization's workflow.
3. Scalability: Choose technology that can grow with the organization and adapt to future needs.
4. Cost-effectiveness: Consider the initial costs, as well as long-term costs, such as maintenance, upgrades, and support.
5. Security: Select hardware and software with strong security features to protect sensitive data and reduce the risk of cyberattacks.
6. User-friendliness: Opt for technology that is easy to use and train employees on, to improve efficiency and reduce downtime.
7. Vendor reliability: Research the reputation and support offered by hardware and software vendors to ensure a reliable partnership.
Considering these management, organization, and technology issues will help make informed decisions and select the most suitable computer hardware and software for the organization.
learn more about computer here:
https://brainly.com/question/15707178
#SPJ4
output: gasway rewards welcome, please input your name: customer data found... how many drinks did you purchase today? customer name: charles babbage number of drinks purchased: 10 you are 5 drinks away from a free car wash! have a nice day! input: grace hopper 1 y output: gasway rewards welcome, please input your name: customer data found... how many drinks did you purchase today? customer name: grace hopper number of drinks purchased: 16 eligible for a free car wash! would you like to redeem your free car wash? (y/n) after redeeming your free car wash, you have 1 drinks remaining towards your next free car wash. have a nice day!
Customers need to purchase a certain number of drinks to become eligible for rewards, such as a free car wash.
As a question-answering bot on Brainly, it is my responsibility to provide factually accurate, professional, and friendly answers. I will be concise and only provide the necessary amount of detail. I will ignore any typos or irrelevant parts of the question. I will not repeat the question in my answer, but I will provide a step-by-step explanation. Lastly, I will use the terms "customer", "purchase", and "eligible" in my answer. Gasway RewardsWelcome,
please input your name: Customer data found...How many drinks did you purchase today? Customer name: Charles BabbageNumber of drinks purchased: 10 You are 5 drinks away from a free car wash! Have a nice day! Input: Grace Hopper 1 YOutput: Gasway RewardsWelcome, please input your name: Customer data found...How many drinks did you purchase today? Customer name: Grace HopperNumber of drinks purchased: 16Eligible for a free car wash! Would you like to redeem your free car wash? (Y/N)After redeeming your free car wash, you have 1 drink remaining towards your next free car wash. Have a nice day! Step-by-step explanation: This is a sample output of a customer rewards program. The program is called Gasway Rewards, and it rewards customers who purchase a certain number of drinks with a free car wash.
Below are the steps that were taken to generate the output:1. The program first prompts the customer to input their name. If the customer has previously made a purchase and their name is in the system, the program will retrieve their data and proceed to the next step.2. The program then asks the customer how many drinks they purchased that day. If the customer purchases at least 15 drinks, they are eligible for a free car wash. If they are not eligible, the program will inform them of how many more drinks they need to purchase before they can redeem a free car wash.3. If the customer is eligible for a free car wash, the program will ask if they would like to redeem it. If they choose to redeem it, the program will subtract 15 drinks from their total and inform them of how many drinks they have left until their next free car wash. If they choose not to redeem it, the program will end.
The Gasway Rewards system is a program where customers can earn rewards based on the number of drinks they purchase. In the given examples:
1. Charles Babbage purchased 10 drinks, making him 5 drinks away from being eligible for a free car wash.
2. Grace Hopper purchased 16 drinks, making her eligible for a free car wash. She redeemed her free car wash, and now has 1 drink remaining towards her next free car wash.
To know more about program , click the below link
https://brainly.com/question/11023419
#SPJ11
what is the output if a user is in the websrus git project directory, changes to a directory called runapp with a .git subdirectory, and executes git log?
Executing the git log command in the runapp directory will provide a detailed record of all the commits made in that directory,
If a user is in the websrus git project directory, changes to a directory called runapp with a .git subdirectory, and executes git log, the output will show the commit history of the runapp directory.
The git log command displays a list of all the commits made in the current branch.
The output will contain the commit message, the author, the date and time of the commit, and a unique commit hash for each commit. The output may also include information on merge commits, which show where multiple branches were merged together.
This information is useful for developers who need to track changes made to a project, as it allows them to see the history of modifications, who made them, and when they were made.
By analyzing the commit history, developers can identify bugs, troubleshoot issues, and collaborate with other team members to improve the project.
To learn more about : log
https://brainly.com/question/30251121
#SPJ11
Can someone please help me fill this out?
1. _____________ create apps and programs such as for doorbells, garage doors, and lights.
2. Computers store information on _____hard drives. Tablets and phones store information on _________ and other devices store information on _______-________ __________.
3. ____________ information is when a computer takes “input” and does what it says like clicking on the “home button”.
4. Computers take information from the input and then display the _________ on a screen or printer.
5. A collection of code that can be run is called a _____________.
6. When a user enters information to be processed, they do this with a ___________, mouse, or microphone.
7. A plan a programmer using to solve a program or write his code is called the ________________________________.
8. The five steps of the SDLC: (know this for your quiz, test and exam)
Planning and Analysis – Define your ________ and ____________ the scope of the work.
1. Design – Design your program by writing pseudocode.
2. Coding – This is where you will write your actual code for your program.
3. Testing – Identify __defects_________ or errors in your code to make sure your program is running perfectly.
4. Maintenance – Update and make improvements based on _user feedback__ and fix errors.
9. In this course, you will learn a programming language called _____________.
10. Coding using a “series of steps that are carried out one after another” is known as _____________________.
11. Main() function – All code goes between the def main(): function and the main(). Just like the tag in HTML.
12. When programming in Python all codes must be ________________ the same number of spaces. It is best to indent using ______ spaces when indenting and always be consistent.
Example: def main():
print (“This line is indented.”)
print(“This line is also indented)
Main()
13. A small segment of code that will provide a specific task is known as a ___________.
14. To display text on a screen using Python you will use the _________ function.
15. To display text on a screen the Print() function must include ___________ around the text.
Example: print(“I Love Movies”)
16. Everything between the quotation marks “ “ is known as a ________ _________ that outputs on the screen.
Lesson 2.02: Solving Problems with Algorithms
1. A detailed step by step set of instructions used to solve a problem is called an ________________.
2. Five Steps of an Algorithm which is in the Design Phase of the Software Development Life Cycle:
1. Think of the big __________.
2. Consider potential ____________.
3. Decide the order in which the instructions need to be ___________.
4. Plan which decisions will be made in the ____________________.
5. Choose which instructions need to be _________________.
3. _______________ is a way of describing a set of instructions in common words and phrases not in Python Code.
4. Pseudocode should:
● Have Comments
● Include all Steps
● Make Sense
● Be Formatted
5. Python can do math: Check out these examples: print(5 * 2) or print(10-5) or print(3+2) or print(10/5)
Lesson 2.03: Python Variables
1. A container that holds information is called a ____________.
2. A variable can hold information such as ___________, ______________, ___________, and titles.
3. Here is a variable example: Name = “John” or SecretNumber = “5” or Age = “32”
4. A _________ _________ is the information in quotations “ “ in a variable.
5. Naming Variables on pg. 2 of Lesson 2.03 is very important. Be sure to review the rules of Naming Variables. This will be on your quizzes, DBA, and exams.
6. _______________ is when you assign a variable name that looks like this: movieTitle or newCar.
7. Note: You can not assign a variable a name that is a “Keyword”. For example, you can’t say:
8. A short statement that evaluates their finished project or program is called a _________ ___________ __________.
9. 4 Steps of a Post Mortem Review:
1. What was the ___________ of your program that you coded?
2. How could your program be _________ in the real world?
3. What is a __________ you ran into, and how did you ______ it?
4. Describe one thing you would do _____________ the next time you write a program.
Answer:
1 – Software Developers
2 – Physical, Flash Memory(ROM), SD Cards, Macro SD card, USB Flash Drives.
3 -
4 – Output
5 – Program of Software
6 – Keyboard
7 – An Algorithm
8 – Objective & Determine, Bugs, The, Form
9 – Coding
10 – Sequential Programming
11 - specifies the main content of a document
12 - indented with, Four
13 – Function
14 – Print()
15 - quotation marks
16 - "string literal"
Lesson 2
1 – An Algorithm
2 – A – picture
B – Problems
C – Executed
D – Algorithm
E – Included
3 – Pseudocode
4 – All Answers
5 - Yes, Python is a powerful programming language that can perform various mathematical operations.
Lesson 2.03 Python Variables
1 - a file, a database, a folder, a document, or an archive, depending on the context and the type of information being stored.
2 numerical values (integers, floating-point numbers), text (strings), Boolean values (true or false)
3 - Yes
4 – string, literal
5 -
6 – camelCase
7 - "if = 5"
because "if" is a keyword in most programming languages and is reserved for a specific purpose within the language's syntax. Trying to use a keyword as a variable name will result in a syntax error.
8- project/program/ evaluation report
9 –
A – Aim
B – Implemented
C – Program, explain
D - the next time I write a program started by carefully defining the problem I am trying to solve and identifying the requirements and constraints of the solution.
Explanation: All answers are referred to after lots of research and documentation.
So for example you need to login using a captive portal to access a WiFi network, can the administrators of the network see what user searches what?
Answer:
I think so
Explanation:
they can look at ips and match it to devices