A hotel woth 225 rooms has 175 for doubles and 50 singles. Singles can be booked in any room, but reservations for two or more people must be booked in double rooms. Let x be the number of single reservations and y the number of reservations for two or more. Which system of inequalities represents this situation?

The highest observed speed is 85 miles per hour.

Below is a sorted stem-and-leaf diagram for the measured speeds (miles per hour) of 49 randomly chosen vehicles on

highway I-80 in Nebraska.

The stem unit is 5. So, the data range is from 50 to 85.

In the stem-and-leaf diagram below, each stem has ten leaves.

The stem-and-leaf diagram for the speeds of the 49 randomly selected vehicles on highway I-80 in Nebraska is as

follows: Stem | Leaf 5 | 08 6 | 013578 7 | 02346678 8 | 0123

The highest observed speed is 85 miles per hour.

The leaf corresponding to the stem 8 is 3, and it is in the last column of the stem-and-leaf diagram.

So, the highest observed speed is 85 miles per hour.

Therefore, the correct option is the one that reads "85."

for such more question on speed

https://brainly.com/question/13943409

#SPJ11

Super Fast Food typically has more wait time because its box plot shows a larger range, with the minimum at 3 and the maximum at 27, compared to the Fast Chicken box plot with a minimum at 5 and a maximum at 20. Additionally, the median of Super Fast Food is 12, compared to the median of Fast Chicken at 12.5. This suggests that the middle value of the data for Super Fast Food is lower than that of Fast Chicken, indicating that Super Fast Food typically has shorter wait times. Therefore, the correct answer is "Super Fast Food, because it has a larger median."

The value of the N must be in order of the 31 so that the value of the Sn will get exceeded by 4.

Only when the kind of sequence is known can the sum of n words in a sequence be calculated. Normally, while computing the sum of an n-number of terms, we take into account arithmetic progression.

The common distinction between each following phrase and each preceding term remains unchanged throughout this process. Natural numbers are an illustration of AP, where the common difference is 1. Hence, in order to determine the sum of all natural numbers, we must be aware of the formula.

[tex]S_N = \sum^N_{k=1} \frac{1}{k}[/tex]

= 1 + 1/2 + 1/3 + 1/4 + ..... 1/N

It is a harmonic series,

Therefore, by trial and error method we get N = 31 to exceed Sn = 4

There are some elimination methods,

ln N + 1/N < Sn < ln N+1

we want Sn > 4

ln N+1/N < 4

maximum value of N is ln N+1/N =4

4<ln N+1 → ln N > 3, N > e³

5<ln N+1 → ln 4, N > e⁴

For Sn to exceed it value maybe in between

e³ < N < e⁴.

20.08 < N < 54.5

As I said it is an approximation it won't give exact value.

By taking a value in that range and check for desired value.

for N = 31 Sn willl exceed '4'.

Learn more about The value of N:

https://brainly.com/question/27792523

#SPJ4

Complete question:

How large must N be in order for

[tex]S_N = \sum^N_{k=1} \frac{1}{k}[/tex]

to exceed 100 to exceed 4? Note: Computer calculations show that for SN to exceed 20, N = 272, 400, 600 and for Sn to exceed 100, N = 1.5x10⁴³.

N = ?

The length of the side AC or the height of the smaller equilateral triangle is 3√2 inches.

The length of the side AC is equal to the height of the smaller equilateral triangle.

We know that in an equilateral triangle, all sides are equal, and all angles are 60 degrees.

Let's call the height of the smaller equilateral triangle h, and the length of one side of the smaller triangle x.

We can use the Pythagorean theorem to find the value of h:

(1/2)x^2 + h^2 = x^2

h^2 = x^2 - (1/2)x^2

h^2 = (1/2)x^2

h = sqrt((1/2)x^2)

Now, we also know that the side of the large equilateral triangle is 6 inches, so x = 6 inches.

Substituting this value into the equation for h, we get:

h = √((1/2)(6^2))

h = √(18)

h = 3√2 inches.

Therefore, the height of the smaller equilateral triangle is 3√2 inches.

Learn more about equilateral triangles at: https://brainly.com/question/30095631

#SPJ1

Answer:

1. 480ft

2. 12ft below the ground

Step-by-step explanation:

1. 80 × 60 = 480

2. 0 - 6 + 2 - 8 = -12

The manufacturer B is calculated to produce, on the average, the fewest number of defective rivets amongst all the manufacturers.

To determine which manufacturer will produce, on average, the fewest number of defective rivets, we need to calculate the proportion of defective rivets for each manufacturer.

Let X be the breaking strength of a rivet from manufacturer A, and let Y be the breaking strength of a rivet from manufacturer B. Then:

P(X < 10000) = P((X - μ_A) / σ_A < (10000 - μ_A) / σ_A) = P(Z_A < -2.5) ≈ 0.0062

where Z_A is a standard normal random variable, and we use the given values μ_A = 14000 psi and σ_A = 2000 psi.

Similarly:

P(Y < 10000) = P(Z_B < -3) ≈ 0.0013

where Z_B is a standard normal random variable, and we use the given values μ_B = 13000 psi and σ_B = 1000 psi.

Therefore, the proportion of defective rivets for manufacturer A is approximately 0.0062, and the proportion of defective rivets for manufacturer B is approximately 0.0013.

Since manufacturer B has a lower proportion of defective rivets, on average, it will produce fewer defective rivets than manufacturer A. So the manufacturer that will produce, on average, the fewest number of defective rivets is manufacturer B.

Learn more about Average :

https://brainly.com/question/28040390

#SPJ4

I will solve each equation one by one to find the value of the variables:

a + 7 = 20

a = 20 - 7

a = 13

c - 12 = 29

c = 29 + 12

c = 41

46 + 12 = 60

b is not present in the equation. This equation cannot be used to find the value of b.

5x + 2x = 35

7x = 35

x = 35 / 7

x = 5

127 - 57 - 9 = 40

z is not present in the equation. This equation cannot be used to find the value of z.

5y + 3y + 4 = 68

8y = 68 - 4

8y = 64

y = 64 / 8

y = 8

2(x + 4) = 24

2x + 8 = 24

2x = 24 - 8

2x = 16

x = 16 / 2

x = 8

6(5g - 7) = 18

30g - 42 = 18

30g = 18 + 42

30g = 60

g = 60 / 30

g = 2

Read more about variables here:

https://brainly.com/question/25223322

#SPJ1

Therefore, segment BD is congruent to segment CA, as required.

A trapezoid is a quadrilateral with at least one pair of parallel sides. In this case, we are given that AB is parallel to CD. The base angles theorem states that the base angles of an isosceles trapezoid are congruent. Since AB and CD are congruent (as given by the reflective property of congruence), the opposite angles formed by the intersecting lines BA and CD (i.e., ∠BAD and ∠CDA) are congruent as well. This establishes that ABCD is an isosceles trapezoid. An isosceles trapezoid has two pairs of congruent sides: AB = CD and AC = BD. Since BA and CO are congruent (as given), we can conclude that AC and BD are congruent as well (by the isosceles trapezoid definition). Finally, the symmetric property of congruence allows us to state that BD is congruent to CA.

Here,

given that ABCD is a trapezoid and segments BA and CO are congruent:

Statements | Reasons

ABCD is a trapezoid | Given

AB || CD | Definition of a trapezoid

∠BAD ≅ ∠CDA | Base angles theorem

AB ≅ CD | Reflective property of congruence

BA ≅ CO | Given

AC ≅ BD | Isosceles trapezoid definition

BD ≅ CA | Symmetric property of congruence

To know more about trapezoid,

https://brainly.com/question/30938243

#SPJ1

Hence, it takes 23 and 4 over 7  in² of paper's surface area to wrap six cylindrical mini muffins.

A cylinder is only a three-dimensional shape in geometry. A cylinder has a cylinder-like form and a top and bottom that are shaped like circles. Both the top and bottom are flat and of the same size. I think the simplest way to visualise a cylinder's shape is to think of a soup can.

Given data:

surface area of total 6 number of cylindrical mini muffins:

S = 6*(π*r²*h)

S = 6* (22/7 * 1² * 1.25)

S = 23.55 in²

S = 23 ⁴/₇ in²

Hence, it takes 23 and 4 over 7  in² of paper's surface area to wrap six cylindrical mini muffins.

Know more about the cylindrical shape

brainly.com/question/25640064

#SPJ1

In Mathematics, the relationship between two values which are not equal is expressed by inequalities. The equation of inequality for the given graph is y ≥ -1/2x + 2.  

In mathematics, an inequality is a relationship in which two numbers or other mathematical expressions compare unequal. Most commonly used to compare two numbers on the number line based on size. There are different notations used to represent different types of inequalities.

In both the cases a is not equal to b and such relationships are known as strict inequalities. This means that a is either strictly less than or greater than b. Equivalents are excluded whereas in inexact inequalities.

For the given graph:

take run = 1 and rise = -1/2

Thus, the slope will be,

Slope = (⁻¹/₂)/1

Slope = -1/2

Since, the y intercept is 2. Then the equation is y = -1/2x + 2

Take point (1,2) on the graph and apply in the equation:

y = -1/2x + 2

2 = -1/2 (1) + 2

2 = -1/2 + 2

2 = 3/2

As, 2 > 3/2. We can replace the = sign into ≥.

So, the eq inequality equation is y ≥ -1/2x + 2.

To know more about inequalities, visit:

https://brainly.com/question/30228778

#SPJ1

Answer:

1) ABE is NOT SIMILAR to DBC

2) FPG is SIMILAR to FGH (AAA)

3) CAN is SIMILAR to HLV (SAS)

4) QRP is SIMILAR to XYP (SSS)

Step-by-step explanation:

1) ABE is NOT SIMILAR to DBC

Since DC and AE are not parallel

2) FPG is SIMILAR to FGH (AAA)

QPF = 180 - 93

QPF = 87

PQF = 180 - 63 - 87

PQF = 30

PQF = GHF

FGH = 180 - 63 - 30

FGH = 87

FGH = QPF

GFH = PFQ

3) CAN is SIMILAR to HLV (SAS)

63 = [tex]x[/tex] x 42

[tex]x[/tex] = 1.5

51 = [tex]x[/tex] x 34

51 = 1.5 x 34

51 = 51

Hypotenuse of CAN = 1.5 x Hypotenuse of HLV

4) QRP is SIMILAR to XYP (SSS)

10 = [tex]x[/tex] x 8

[tex]x[/tex] = 1.25

(20 + 5) = 1.25 x XY

XY = 20

(24 + 6) = 1.25 x XP

XP = 24

Answer:

you would put a solid circle on the 3 and go to the left, for example:

Step-by-step explanation:

You would want the variable to be on the left, so you would need to see that the 3 is bigger or equal to a.

Answer:

(3, -1).

Step-by-step explanation:

f(x)=x^2-6x+8

Convert to vertex form by completing the square:

f(x) = (x - 3)^2 - 9 + 8

     = (x - 3)^2 -1

So the vertex is at (3, -1).

To display this data on a line plot, we need to create a number line with a range of values from 1.4 to 2.0 with intervals of 0.1.

Then, we can plot each data point by hovering over the corresponding number on the number line and clicking and dragging up to the corresponding value.

The line plot will show a visual representation of the data, with each point representing the average time spent on the computer each day by a different student.

The line connecting the points will show the trend of the data and can be used to make inferences about the overall behavior of the students in terms of their computer usage.

In conclusion, the line plot for the given data on the average number of hours different students spend on the computer each day will show the student's weekly computer time and provide insight into their computer usage patterns.

For similar question on line plot

https://brainly.com/question/15277510

#SPJ11

Answer: 3 times

Step-by-step explanation:

Setting up the equation

If the function touches the horizontal axis, that means y=0, or f(x)=0 at that point(s).

So, we set our equation equal to 0

[tex]0=x^4+10x^3+24x^2\\[/tex]

Factor out x^2

[tex]0=x^2(x^2+10x+24)[/tex]

So, either [tex]x^2[/tex] or [tex](x^2+10x+24)[/tex] must equal zero

Factoring

[tex]x^2+10x+24=0\\(x+6)(x+4)=0\\[/tex]

x=-6 or x=-4

from before, [tex]x^2 = 0\\x=0[/tex]

So, f(x) equals zero at 3 places, when x=0, when x=-6, and when x=-4

The true statement is B. This is a function.

In order to be considered a function, each element in the domain must be associated with exactly one element in the range. As long as every element in the domain is mapped to one and only one element in the range, it is a function. Option A is incorrect because a function does not require every element in the range to be associated with an element in the domain. There can be unused elements in the range without affecting the status of a function.

Option C is also incorrect because having elements in the domain mapped onto the same element in the range does not disqualify it from being a function. Multiple elements in the domain can share a single element in the range, and it will still be a function as long as each domain element is paired with only one range element. Finally, option D is incorrect because if an element in the domain has multiple elements in the range associated with it, then it would not be a function. However, the correct statement, option B, already indicates that this is a function, so option D is not true for the given question.

In conclusion, the statement "this is a function" is true, as long as each element in the domain has exactly one associated element in the range. Therefore, the correct option is B.

The question was incomplete, Find the full content below:

consider the following: which statement is true? question 1 options:

A. this is not a function because some of the elements in the range are not associated with any element in the domain.

B. this is a function.

C. this is not a function because some of the elements in the domain are mapped onto the same element in the range.

D. this is not a function because some elements in the domain have multiple elements in the range associated with it.

Know more about Domain here:

https://brainly.com/question/26098895

#SPJ11

We use the product rule and the chain rule to find the derivative of y = e^4x sin 4x.

y = e^4x sin 4x

y' = (e^4x)(4sin 4x + cos 4x(4))

y' = 4e^4x(sin 4x + cos 4x)

Therefore, the first derivative of y=e^4x sin 4x is y' = 4e^4x(sin 4x + cos 4x).

Interpretation: The first derivative gives the instantaneous rate of change of the function at each point. In this case, the derivative represents the rate at which the amount of medicine remaining in a person's bloodstream changes with respect to time x. The function has a maximum or minimum when the first derivative is equal to zero.

Answer:

1789/30

Step-by-step explanation:

To solve the expression

You have to convert the mixed fraction => improper:

(284/5 + 7/6) + 4/3

After that add:

1749/30 + 4/3

Add:

1789/30

Answer:

45

Step-by-step explanation:

Answer:

45

Step-by-step explanation:

The solutions in the interval [0, 2) are:

x = 0 and x = 2π/3.

What is the trigonometric ratio?

The trigonometric functions are real functions that relate an angle of a right-angled triangle to ratios of two side lengths. They are widely used in all sciences that are related to geometry, such as navigation, solid mechanics, celestial mechanics, geodesy, and many others.

Using the identity cos2θ = cos²θ - sin²θ, we can rewrite the equation as:

cos²x - sin²x = cos x

We can then use the Pythagorean identity sin² x + cos² x = 1 to substitute for sin² x:

cos²x - (1 - cos²x) = cos x

Simplifying this equation gives:

2cos² x - cos x - 1 = 0

We can solve for cos x using the quadratic formula:

cos x = [1 ± √(1 + 8)] / 4

cos x = [1 ± √9] / 4

cos x = (1 ± 3) / 4

cos x = 1 or cos x = -1/2

If cos x = 1, then x = 0.

If cos x = -1/2, then x = 2π/3 or x = 4π/3.

However, we need to check that these solutions are in the interval [0, 2). The solution x = 4π/3 is outside this interval, so we discard it.

Therefore, the solutions in the interval [0, 2) are:

x = 0 and x = 2π/3.

In increasing order, the solutions are:

x = 0 and x = 2π/3.

To learn more about the trigonometric ratio visit:

https://brainly.com/question/13729598

#SPJ1

This bond has a Current yield of 6.9 percent, a volume of 18, and a net change of negative one-eighth. The correct answer is (a)  101Three-fourths; $101,750.

The bond listing provided is a typical example of how Corporate bonds are displayed. The table consists of 5 columns with 1 row, where each column provides specific information about the bond.

The first column displays the name of the bond, which in this case is NYTel 7 and one-fourth 33, indicating that it is a bond issued by New York Telephone.

The second column shows the current yield of the bond, which is 6.9 percent.

The third column displays the volume of the bond, which is 18.

The fourth column provides the closing price of the bond, which is 101 and three-fourths.

Finally, the fifth column shows the net change of the bond, which is negative one-eighth.

To answer the question, we need to determine the closing price and dollar amount of the bond. According to the bond listing, the closing price of the bond is 101 and three-fourths. To calculate the dollar amount, we need to multiply the closing price by the face value of the bond. Assuming that the face value of the bond is $1,000, the dollar amount of the bond would be $101,750 (101.75 x 1000).

Therefore, the correct answer is (a) 101Three-fourths; $101,750. This bond has a current yield of 6.9 percent, a volume of 18, and a net change of negative one-eighth. Understanding how to read and interpret bond listings is crucial for investors who want to make informed investment decisions.

To Learn More About Current yield

https://brainly.com/question/27990598

#SPJ11

Answer:

The gain is 139.

Step-by-step explanation:

34.95x25= 873.75

29.39x25= 734.75

873.75- 734.75= 139

The total volume of the plant stand is given by the sum of these expressions: (x+1)³ + (x+1) * (x+1) * (x-1) + (2x+3) * (2x-2) * (x+1)

Volume refers to the amount of space occupied by an object or substance. It is typically measured in cubic units (such as cubic centimeters, cubic inches, or liters) and is used to describe the size or capacity of an object or container. Volume can also refer to the loudness or intensity of a sound. In physics, volume is an important measurement in determining the properties and behavior of gases, liquids, and solids.

Here,

Let's calculate the volume of each section based on the given sides.

Cube with sides x+1:

The formula for the volume of a cube is V = side³, where side is the length of one of its sides. In this case, the side length of the cube is x+1, so the volume of this section would be:

V1 = (x+1)³

Cuboid with sides x+1, x+1, and x-1:

The formula for the volume of a cuboid is V = length * width * height. In this case, the length would be x+1, the width would be x+1, and the height would be x-1. So the volume of this section would be:

V2 = (x+1) * (x+1) * (x-1)

Cuboid with sides 2x+3, 2x-2, and x+1:

Similarly, using the formula for the volume of a cuboid, the volume of this section would be:

V3 = (2x+3) * (2x-2) * (x+1)

Now, to find the total volume of the plant stand, we can add up the volumes of all three sections:

Total volume = V1 + V2 + V3

= (x+1)³ + (x+1) * (x+1) * (x-1) + (2x+3) * (2x-2) * (x+1)

To know more about volume,

https://brainly.com/question/28338582

#SPJ1

After answering the presented question, we can conclude that equation Therefore, the price of each snack is $0.62.

An equation in mathematics is a statement that states the equality of two expressions. An equation is made up of two sides that are separated by an algebraic equation (=). For example, the argument "2x + 3 = 9" asserts that the phrase "2x Plus 3" equals the value "9." The purpose of equation solving is to determine the value or values of the variable(s) that will allow the equation to be true. Equations can be simple or complicated, regular or nonlinear, and include one or more elements. The variable x is raised to the second power in the equation "x2 + 2x - 3 = 0." Lines are utilised in many different areas of mathematics, such as algebra, calculus, and geometry.

price of each snack x.

15 × $1.75 = $26.25

cost of snacks for the other fifteen students

$26.25 + 15x = $35.55

15x = $35.55 - $26.25

15x = $9.30

x = $0.62

Therefore, the price of each snack is $0.62.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Answer: 10

Step-by-step explanation:

Adjacent angles in a parallelogram are supplementary (add up to 180), so we know that the unknown angle equals 100°, since the adjacent angle equals 80°.

So, we can set up an equation:

[tex]11x-10=100\\11x=110\\x=10[/tex]

For any value of x and y, this equation cannot be true. As a result, the equation system has no solution.

0x + 0y = 1

The elimination approach can be used to resolve the system of equations below.

How does elimination work?

The elimination method is a method for algebraically resolving systems of linear equations. Using fundamental arithmetic operations, we can eliminate any one of the variables in the elimination technique, and then we can simplify the equation to determine the value of the remaining variable1.

The elimination procedure involves the following steps:

1. Choose one variable to leave out.

2. In order to make the coefficients of that variable opposite in sign, multiply or divide both equations by a non-zero constant.

3. Adjust the resulting equations such that the selected variable is removed.

4. Simplify and ascertain the other variable's value.

According to the question:

2x - 3y = 6

4x - 6y = 11

The result of multiplying the first equation by two is:

4x - 6y = 12

We can now take the second equation out of this equation:

4x - 6y = 12

(4x - 6y = 11)

—————————

0x + 0y = 1

For any value of x and y, this equation cannot be true.

To know more about elimination method visit:

brainly.com/question/14619835

#SPJ1

The test statistic is z = 0.68, and the p-value is approximately 0.2486.

This problem involves testing the hypothesis that the proportion of union workers in the population has increased from 11.5%.

Let p be the true proportion of union workers in the population.

The null hypothesis is H0: p = 0.115, and the alternative hypothesis is Ha: p > 0.115 (one-tailed test, since we are testing for an increase in union membership).

To find the test statistic, we use the formula for a z-test for proportions:

z = ([tex]\bar p[/tex] - p) / [tex]\sqrt{(p(1-p)/n) }[/tex]

where, [tex]\bar p[/tex] is the sample proportion, n is the sample size, and sqrt denotes the square root function.

In this case, [tex]\bar p[/tex] = 36/300 = 0.12, n = 300, and p = 0.115.

Substituting these values into the formula, we get:

z = (0.12 - 0.115) / [tex]\sqrt{(0.115(1-0.115)/300) }[/tex]≈ 0.68

To find the p-value, we need to find the probability of getting a test statistic as extreme or more extreme than 0.68, assuming that the null hypothesis is true (i.e., assuming that p = 0.115).

Since this is a one-tailed test, we need to find the area under the standard normal curve to the right of 0.68:

p-value = P(Z > 0.68) ≈ 0.2486

Using a standard normal distribution table or a calculator, we find that the area to the right of 0.68 is approximately 0.2486.

Therefore, the p-value for the test is approximately 0.2486.

For similar question on proportion.

https://brainly.com/question/29006912

#SPJ11

Question: You may need to use the appropriate appendix table or technology to answer this question. An agency reports that historically 11.5% of workers in a particular country belong to unions. Suppose a sample of 300 workers is collected to determine whether union efforts to organize have increased union membership.                                                                                                                                                                                                       If the sample results show that 36 of the workers belonged to unions, what is the p-value for your hypothesis test? Find the value of the test statistic. (Round your answer to two decimal places.) Find the p-value. (Round your answer to four decimal places.) p-value = ?

Answer:find the root of 6

Step-by-step explanation: