a global positioning system (gps) locator at site a reveals that it is moving at 2.1 centimeters per year to the east. a second gps locator is tracking site b, which is moving at 2.0 centimeters per year to the west. what sort of plate boundary is this? radio button unchecked transform radio button unchecked convergent radio button unchecked divergent submit

Answers

Answer 1

This is a transform plate boundary, where two plates are sliding past each other horizontally in opposite directions, resulting in shear stress and friction along the boundary.

This is a transform plate border, which occurs when two tectonic plates move horizontally in opposing paths past each other. A transform fault, such as the San Andreas Fault in California, marks the border between these continents.

Shear tension and friction along the border are caused by the mutual motion of the plates, culminating in earthquakes and other tectonic actions. The lack of fresh crust creation or destruction at transform boundaries is characterised by the plates merely sliding past each other.

Learn more about transform plate boundary:

https://brainly.com/question/30333290

#SPJ4


Related Questions

based on the rates and directions of the plate movement that we observe today, how might the positions of the continents be different 50 million years from now?

Answers

It is difficult to predict with any certainty the exact positions of the continents in 50 million years from now.

However, based on the current rates and directions of the plate movements, it is likely that the continents will have moved and shifted significantly. For instance, the North American, South American, and African plates are moving in a westward direction, which could result in the formation of a supercontinent in the Atlantic Ocean.

Additionally, the Indo-Australian Plate is moving northward, which could cause the Indian subcontinent to collide with the Eurasian Plate, leading to the formation of a new supercontinent. Finally, the Pacific Plate is moving in a northwestward direction, potentially shifting the continents of Australia, New Zealand, and Polynesia towards the Asian continent.

To know more about continents , click here:

https://brainly.com/question/17190136

#SPJ4

aquifers may be characterized in part by the temporal nature of their source water. typically, which aquifers would be most likely to be depleted from over use?

Answers

Aquifers that are most likely to be depleted from overuse are those that are recharged by surface water sources such as rivers, streams, and lakes.

These aquifers rely on the regular input of surface water to replace the water that is removed through pumping. When the surface water is reduced due to drought or overuse, the aquifer can become depleted.

Aquifers that are recharged by precipitation or groundwater from other aquifers are less likely to be depleted from overuse as they rely on a more constant source of water to replenish them. However, overuse of these aquifers can still cause long-term damage and lead to depletion over time.

To know more about Aquifers, click here:

https://brainly.com/question/14916917

#SPJ4

PLEASE HELP:
write a paragraph on how Benito Mussolini treated people poorly

Answers

Benito Mussolini, the leader of Italy during World War II, was known for his brutal and oppressive regime. He treated people poorly, particularly those who opposed him and his fascist ideology. Mussolini was known to use violence, intimidation, and propaganda to suppress dissent and control the population. He established a secret police force, known as the OVRA, which had the power to arrest, detain, and torture anyone suspected of opposing the regime. Mussolini also implemented discriminatory policies against minority groups, such as Jews and homosexuals, leading to their persecution and even death. His reign of terror resulted in the suffering and loss of countless lives, leaving a dark stain on Italy's history.

what temporary land mass linking siberia and alaska is thought to have allowed hunter-gatherers to migrate from asia to north america? responses siberian connection siberian connection beringia beringia alaska glacial pathway alaska glacial pathway bering strait bering strait temporary land mass linking siberia and alaska is thought to have allowed hunter-gatherers to migrate from asia to north america?

Answers

Beringia is a temporary land mass which linked Siberia and Alaska, allowing hunter-gatherers to migrate from Asia to North America.

The correct option is B.

Beringia was formed during the Late Pleistocene era, approximately 20,000 to 30,000 years ago. This land bridge was formed due to a decrease in sea levels, exposing a wide swath of land between Siberia and Alaska. This land bridge allowed humans to migrate from Asia to North America, which is believed to have been the first humans to settle in the Americas.

The land bridge was eventually submerged by rising sea levels, but it is believed that this land bridge allowed humans to travel across the Bering Strait, settling in both North and South America. This is known as the Bering Land Bridge Theory, and is the most widely accepted theory for the first human migration to the Americas.

Hence, the correct option is B

To know more about Beringia, Click here:

https://brainly.com/question/1321990

#SPJ4


Look at the projected population pyramid 20 years in the future by selecting the year 2035 from the drop-down menu. What changes in the population do you notice in comparison to the 2015 population pyramid?

Answers

The most significant difference between the population pyramids of 2015 and 2035 is that the population in 2035 is more evenly distributed. This suggests that the population is relatively stable, with a balanced birth and death rate.

What are population pyramids used for?

A population pyramid refers to visual representation of two variables: age and gender. Demographers, who study populations, use them. A population pyramid is a graph that depicts the age distribution of a population divided down the center by male and female members.

If a portion of the population has been affected by abrupt changes, such as casualties from armed conflict, high female mortality in childbirth, or the migration of young workers out of poorer regions, the graph will provide a visual representation of how the future population will be affected.

Read more about population pyramids

brainly.com/question/2303466

#SPJ1

which layer of earth possesses the greatest thickness? view available hint(s)for part a which layer of earth possesses the greatest thickness? inner core outer core crust mantle lithosphere

Answers

The mantle layer of the earth possesses the greatest thickness. It extends from the Mohorovicic Discontinuity, which is found beneath the crust, to a depth of about 2900 km.

The mantle is the second layer of the earth, which lies beneath the crust. It is about 2900 km thick and is composed mainly of silicate rocks that are rich in iron and magnesium.

The mantle has the greatest thickness of all the layers of the earth.The mantle is further subdivided into the upper mantle and the lower mantle. The upper mantle extends from the crust to a depth of about 660 km.

It is composed of the lithosphere, which is the rigid outer layer, and the asthenosphere, which is the soft, plastic layer beneath it. The lower mantle lies beneath the upper mantle and extends from a depth of about 660 km to 2900 km.

For more question on crust

https://brainly.com/question/2097080

#SPJ11

what term refers to the original location of a settlement and the factors that influenced the choice of that location?

Answers

The expression "site" alludes to the particular place where a settlement or local area is laid out, and the variables that impacted the decision of that area. The term is utilized in geology, human sciences, and other related fields that concentrate on human settlements and their communication with the climate.

At the point when people choose to lay out a settlement in a specific area, they consider a few factors that make that area reasonable for their requirements. These variables can incorporate the actual attributes of the site, like the geography of the land, the environment, and the accessibility of normal assets like water, prolific soil, and lumber.

For instance, a settlement situated close to a stream or a coast might approach freshwater and fish, while a settlement situated in a dry and parched locale might depend on wells or underground springs for water. Likewise, a settlement situated in a forested locale might approach wood for development and fuel, while a settlement situated in a prairie or savannah district might depend on brushing creatures for food and dress.

Notwithstanding the actual qualities of the site, different variables that might impact the decision of a settlement area incorporate its closeness to transportation courses, different settlements, and exchange organizations. Settlements situated close to significant transportation courses, like streams, streets, or rail lines, may have more prominent admittance to labor and products, while settlements situated in disengaged or far off regions might be more independent however have restricted admittance to outside assets.

Understanding the site of a settlement is significant for concentrating on the turn of events and development of human social orders over the long haul. By looking at the physical and social qualities of a site, scientists can acquire bits of knowledge into the elements that impacted decisions by past social orders and the manners by which they adjusted to their current circumstance. This information can likewise illuminate current metropolitan preparation and advancement endeavors, as it can assist organizers with distinguishing reasonable areas for new settlements and to plan foundation and administrations that address the issues of neighborhood networks.

The term that refers to the original location of settlement and the factors that influenced the choice of that location is "site and situation."

The "site" refers to the physical characteristics of the location where a settlement was established. Factors that contribute to the site selection include the availability of water, suitable land for agriculture, natural resources, and protection from natural hazards and enemies. The "situation" refers to the broader context of the settlement's surroundings, such as its proximity to trade routes, nearby settlements, and potential for growth.

When choosing a site for a settlement, early settlers considered several factors. Access to a reliable water source, such as a river or a lake, was crucial for drinking, irrigation, and transportation. Suitable land for agriculture was another important factor since it would provide food for the population. The availability of natural resources, such as timber, stone, and minerals, was also essential for the growth and development of the settlement.

Protection from natural hazards, such as floods, earthquakes, or landslides, was a consideration for the safety of the inhabitants. Settlers also sought locations that offered protection from potential enemies, such as elevated areas or those surrounded by natural barriers like mountains or dense forests.

The situation of a settlement played a significant role in its success and growth. Settlements situated near trade routes or other settlements benefitted from the exchange of goods, ideas, and resources, promoting economic and cultural development. The potential for growth was another factor, as settlements needed room to expand as their populations grew.

In conclusion, the term "site and situation" refers to the original location of a settlement and the factors that influenced its selection. These factors include physical characteristics, such as access to water, suitable agricultural land, and natural resources, as well as protection from hazards and enemies. The situation of the settlement, including its proximity to trade routes and nearby settlements, also played a role in its success and growth.

To learn more about location of settlement here:

https://brainly.com/question/28162006#

#SPJ11

Muslims in British Raj were unhappy with British rule for a variety of reasons. Which two primary reasons did the Muslims believe that they needed a separate statehood from what they considered the Hindu-Raj? Select 2 correct answer(s)

Question 1 options:

Muslims believed that the British Raj was biased towards the Hindus

The arrest of Ghandi caused the Muslim community to revolt

Muslims were able to hold positions just as their Hindu counterparts

Leaders such as Nehu rejected unified premiership offered by Ghandi

Execution of Bhutto brought renowned ire to the British Raj

Answers

The   two primary reasons did the Muslims believe that they needed a separate statehood from what they considered the Hindu-Raj are:

A. Muslims believed that the British Raj was biased towards the Hindus

D. Leaders such as Nehru rejected unified premiership offered by Gandhi,


What are the primary reasons that the Muslims believe that they needed a separate statehood?

During the British Raj in India, the Muslim community was unhappy with British rule for various reasons. One of the primary reasons was that they believed the British Raj was biased towards the Hindus.

Muslims felt that the British administration gave preferential treatment to the Hindus, who formed the majority of the population in India. This was evident in the distribution of administrative positions, where Muslims felt they were underrepresented.

Learn more about Muslim here:https://brainly.com/question/4466

#SPJ1

screening and sedimentation to remove the larger suspended solids in sewage represents what level of sewage treatment?

Answers

The initial stages of sewer treatment, screening, and sedimentation, are known as the basic level of treatment or Preliminary therapy.

Preliminary therapy is the term used to describe this stage of care. Large suspended particles like detritus, litter, and grit are taken from the effluent during the early treatment stage through the screening process.

The effluent is then allowed to settle in a sedimentation basin, where any suspended particles are permitted to sink to the bottom.

The majority of the larger solids are removed during this process, which reduces the amount of effluent produced and keeps them from damaging the machinery used downstream or interacting with the biological treatment steps that follow.

Although primary therapy is crucial, secondary and tertiary treatment processes are usually carried out after it.

Learn more about the screening and sedimentation at

https://brainly.com/question/9675235

#SPJ4

considering that (1) washington d.c. is located along a estuary, and (2) sea level is currently rising along the eastern u.s. coastline based on observational data. in what direction will the estuary in which washington d.c. occupies migrate as sea level rises?

Answers

The estuary that Washington, D.C. is located in will move north in the direction of the lowest height as the sea level increases.

To reach the Potomac River, which flows through the city, the bay must travel westward. The Potomac River's water levels will rise as a result of rising sea levels, which will also force the estuary to move north.

The local ecosystem, as well as the structures and facilities along the coastline, will all be significantly impacted by this migration.

To reduce the possible detrimental effects on their cities and inhabitants, coastal areas must prepare for and adjust to the impacts of increasing sea levels.

Learn more about the rise in sea level at

https://brainly.com/question/3988772

#SPJ4

what is the temperature of the oceanic crust and continental crust

Answers

Answer: The temperature of the oceanic crust and continental crust can vary depending on the location and depth.

Explanation:

Generally, the temperature of the oceanic crust at the surface ranges from about 2 to 10 °C (36 to 50 °F) in polar regions to about 20 to 25 °C (68 to 77 °F) in the tropics. At the depth of 1 kilometer (0.62 miles) below the surface, the temperature can range from about 100 to 300 °C (212 to 572 °F).

The temperature of the continental crust varies more widely, with an average temperature of about 15 to 25 °C (59 to 77 °F) at the surface, but can reach up to 500 °C (932 °F) at depths of 30 kilometers (18.6 miles) or more in some areas. However, the temperature of the continental crust is generally cooler than the temperature of the oceanic crust.

the maximum amplitude of a seismic wave from a magnitude 6 earthquake will be how many times greater than that for a magnitude 4 earthquake?

Answers

Answer:
The magnitude of an earthquake determines the amplitude of seismic waves. In particular, each unit increase in magnitude corresponds to a tenfold increase in wave amplitude.

As a result, the amplitude of a seismic wave produced by a magnitude 6 earthquake is 10(6-4) = 100 times greater than that produced by a magnitude 4 earthquake.

In other words, the maximum amplitude of a seismic wave produced by a magnitude 6 earthquake is 100 times greater than that produced by a magnitude 4 earthquake.


When it comes to the maximum amplitude of a seismic wave from a magnitude 6 earthquake being how many times greater than that for a magnitude 4 earthquake, the answer is 100 times greater.

A seismic wave is a shock wave that is caused by an earthquake. They spread out from the focal point, or hypocenter, of the earthquake's release. These waves, which radiate outward from the hypocenter, spread out in all directions.

Seismic waves are created by tectonic shifts in the Earth's crust, and they are divided into two categories: body waves and surface waves. Body waves move through the Earth's interior, while surface waves are restricted to the surface. Earthquakes are classified by their magnitude, which is calculated using the Richter scale. The Richter scale is a logarithmic scale that quantifies the amount of energy released by an earthquake. Each step on the scale is ten times greater than the previous one.

Magnitude 6 earthquakes release 32 times more energy than magnitude 5 earthquakes. Similarly, magnitude 7 earthquakes release 32 times more energy than magnitude 6 earthquakes. The scale is logarithmic, as previously mentioned, and thus every one-point increase corresponds to a tenfold increase in the amount of energy released.

The amplitude of a seismic wave is directly proportional to the magnitude of the earthquake. Therefore, if the magnitude of an earthquake increases by one point, the amplitude of the seismic wave increases by ten times. As a result, the maximum amplitude of a seismic wave from a magnitude 6 earthquake is 100 times greater than that for a magnitude 4 earthquake.

To learn more about earthquake here:

https://brainly.com/question/20409140#

#SPJ11

BC =
Round your answer to the nearest hundredth.
B
35°
6
А

Answers

The length of BC is 4.91 to the nearest hundredth using the cosine ratio.

What does trigonometry mean in plain English?

A branch of mathematics called trigonometry examines connections between triangles' sides and angles. Due to the fact that every straight-sided form can be decomposed into a group of triangles, trigonometry may be found across all of geometry. the adjacent side/hypotenuse divided by the cosine ratio

Considering the right triangle in the aforementioned figure, this means: = 35°

Nearby =? = BC

(6) Hypotenuse

Hence, cos 35 = BC/6 cos 35 6 BC = 4.91

As a result, the length of BC is 4.91 to the nearest hundredth using the cosine ratio.

Learn more about cosine ratio here:

brainly.com/question/15793827

#SPJ1

a long-lived group of thunderstorms that causes a concentrated area wind-damage reports at least 400 kilometers (250 miles) long is called a...

Answers

A long-lived group of thunderstorms that causes a concentrated area of wind damage reported at least 400 kilometers (250 miles) long is called a Derecho.

A derecho is a severe thunderstorm with a very long duration. If a storm's wind damage swath is more than 240 miles long and there are gusts of wind of at least 58 mph along the majority of the storm's route, the storm is categorized as a derecho.

A mesoscale convective system, which is characterized by a rapidly moving collection of severe thunderstorms, is the source of a derecho, which is a widespread, protracted, straight-line windstorm. Heavy rainfall, tornado- and hurricane-force winds, as well as flash floods, can all result from Derechos.

The Spanish word "derecho" means "direct" or "straight ahead;" It was created by Hinrichs to differentiate the damage caused by straight-line wind from that caused by tornadoes.

To learn more about Derecho, click here:

https://brainly.com/question/24078934

#SPJ4

Find the error with subject-verb agreement. Select the incorrect verb and type it correctly.
The
American
photojournalist
Margaret
Bourke-White
covered
several
historic
events
of
the
twentieth
century
including
World
War
II
Bourke-White's
photographs
remains
relevant
today
revealing
both
the
suffering
and
the
perseverance
of
humankind

Answers

The incorrect verb in the sentence is "remains.”

It should be "Bourke-White's photographs remain relevant today revealing both the suffering and the perseverance of humankind."

which global warming feedback listed below is one of the main reasons for the amplified warming we see in polar regions

Answers

The main reason for the amplified warming we see in polar region are due to ice-albedo feedback.

The ice-albedo feedback is a process in which changes in the Earth's surface albedo (reflectivity) cause changes in the amount of solar radiation absorbed by the Earth's surface, resulting in further changes in surface albedo.

As ice and snow cover recedes, so does the surface albedo, causing more solar radiation to be absorbed by the Earth's surface. This causes increased melting of ice and snow, which reduces surface albedo even further, and so on.

Changes in the extent of ice and snow cover can affect the amount of solar radiation absorbed by the Earth's surface, global temperature, and weather patterns, which can have a significant impact on the Earth's climate system.

Learn more about the ice-albedo feedback:

https://brainly.com/question/31235973

The complete question:

Which global warming feedback listed below is one of the main reasons for the amplified warming we see in polar regions?

a. The Stephan-Boltzmann feedback

b. The water vapor feedback

c. The ice albedo feedback

d. The lapse rate feedback

One of the main reasons for amplified warming in polar regions is the ice-albedo feedback. This feedback mechanism plays a significant role in global warming and contributes to the rapid warming observed in these areas.

The ice-albedo feedback involves a change in the amount of solar radiation absorbed by the Earth's surface due to changes in ice cover. Ice and snow have a high albedo, which means they reflect a large portion of incoming sunlight back into space.

As global temperatures rise, more ice melts, exposing darker surfaces like water and land, which have lower albedos and absorb more sunlight. This additional absorbed heat causes further warming and more ice melt, creating a positive feedback loop that accelerates temperature increases in polar regions.

This process is particularly impactful in the Arctic, where sea ice loss has been significant. As the ice melts, the exposed ocean water absorbs more heat, further raising temperatures and melting even more ice. This amplification of warming in polar regions has wide-ranging consequences for global climate systems, as it can affect ocean circulation patterns, weather events, and ecosystems.

In summary, the ice-albedo feedback is one of the primary reasons for amplified warming in polar regions. This mechanism is a result of the increased absorption of solar radiation due to melting ice, which creates a positive feedback loop that accelerates temperature increases and contributes to the significant warming observed in these areas.

To learn more about amplified warming here:

https://brainly.com/question/12194851#

#SPJ11

n what direction does wind blow? in what direction does wind blow? wind blows from regions of higher pressure to regions of lower pressure. wind blows from regions of higher temperature to regions of lower temperature. wind blows from regions of lower pressure to regions of higher pressure. wind blows from regions of lower temperature to regions of higher temperature.

Answers

The wind blows from regions of higher pressure to regions of lower pressure.  Option A is the correct response.

This is known as the pressure gradient force, which causes air to move from high-pressure regions to low-pressure regions. The greater the difference in pressure between two areas, the stronger the wind will be. The Coriolis effect, which deflects the path of moving air to the right in the Northern Hemisphere and to the left in the Southern Hemisphere, also affects wind direction.

This deflection is caused by the Earth's rotation. Therefore, wind can blow in various directions depending on the pressure gradient force and the Coriolis effect.

Correct answer is option A.

You can learn more about wind direction at

https://brainly.com/question/1420586

#SPJ11

if a mountain range has forest on the western slope and desert on the eastern slope, what is the direction of the prevailing winds? west to east east to west north to south south to north

Answers

If a mountain range has forest on the western slope and desert on the eastern slope, the direction of the prevailing winds is from west to east.

Prevailing winds refer to the global winds that blow in specific directions over a given region. They result from the movement of air masses from high-pressure zones to low-pressure zones.

Prevailing winds have an impact on the climate of a given region. The direction of the prevailing winds is determined by the rotation of the earth, the distribution of land and water, and temperature differences between the equator and poles.

The direction of prevailing winds changes with the season. Prevailing winds have an impact on the climate of a given region.

For more question on rotation

https://brainly.com/question/1808956

#SPJ11

which of the following best describes belady's anomaly? group of answer choices decreasing the number of available frames increases the number of page faults increasing the frame size increases the number of page faults decreasing the frame size increases the number of page faults increasing the number of available frames increases the number of page faults

Answers

Decreasing the number of available frames increases the number of page faults, best describes Belady's anomaly. The correct option is A.

Belady's Anomaly is a phenomenon that occurs in virtual memory systems. It is a counterintuitive behavior in which increasing the number of available frames increases the number of page faults. This anomaly is caused by the locality of reference principle of virtual memory, which states that a program will tend to access memory locations that are close together.

When the number of frames is increased, the working set of a program is broken up into multiple frames. This causes the program to access more frames than it did before and thus creates more page faults. Additionally, decreasing the frame size increases the number of page faults because the same amount of memory is now spread out over a greater number of frames, thus creating more page faults.

To know more about counterintuitive , click here:

https://brainly.com/question/17004386

#SPJ4

in the lake of constance story, as the rider was on the way to the inn, what was the geographical environment?

Answers

The Lake of Constance" is the title of a novel by German author Eduard Mörike. The novel is set in the region around Lake Constance, which is located in central Europe at the northern foot of the Alps, bordered by Germany, Austria, and Switzerland.

In the Lake Constance story, the geographical environment the rider encountered while on the way to the inn was primarily characterized by a picturesque landscape with diverse features. Lake Constance itself is a large freshwater lake situated at the northern foot of the Alps, which borders Germany, Switzerland, and Austria.


The area surrounding the lake is a blend of rolling hills, lush green meadows, dense forests, and small villages.
As the rider made his way to the inn, he likely navigated through the undulating terrain and narrow roads that connected the scattered settlements in the region.

He may have also encountered vineyards and orchards along the way, as agriculture is an important aspect of the local economy. The forests in the area are home to a variety of flora and fauna, contributing to the region's overall biodiversity.

In addition, the story's setting features picturesque views of the lake and its sparkling waters, which serve as a focal point for the region's natural beauty. The shoreline of Lake Constance is peppered with charming towns and fishing villages, offering glimpses into the region's history and cultural heritage.

In summary, the geographical environment the rider experienced in the Lake Constance story included a diverse landscape of rolling hills, lush meadows, dense forests, and charming villages. The area is characterized by its agricultural activities, biodiversity, and the stunning views of Lake Constance itself.

To learn more about environment here:

https://brainly.com/question/17413226#

#SPJ11

which of the following is correct? a. mafic magma has a much lower viscosity than felsic magma. b. mafic magma has a much greater viscosity than felsic magma. c. mafic magma and felsic magma are equally viscous. d. depending on its silica content, the viscosity of mafic magma may be greater or lower than that of felsic magma.

Answers

Answer:

mafic magma has a much lower viscosity than felsic magma.

Mafic magma has a much lower viscosity than felsic magma. The correct answer is A.

Mafic and felsic magmas differ in their chemical compositions, which in turn influence their physical properties, including viscosity. Mafic magma has a lower silica content (around 50%) compared to felsic magma, which has a higher silica content (around 65-75%). Silica content plays a significant role in determining a magma's viscosity, as higher silica content leads to higher viscosity.

Viscosity refers to a fluid's resistance to flow, and in the case of magma, it affects how easily the molten rock can move and deform. Mafic magma, with its lower silica content, is less viscous and flows more easily than felsic magma. This difference in viscosity can also impact volcanic eruptions; mafic magma can lead to more fluid, less explosive eruptions, whereas felsic magma can result in more explosive eruptions due to its higher viscosity trapping gases within the magma.

To learn more about Mafic magma here:

https://brainly.com/question/14970752#

#SPJ11

Please help dawg my teacher doesn't explain stuff

Answers

The values of x in the triangles and the missing lengths are solved below

Calculating the values of x in the triangle

Given that the triangles are special triangles with 45 degree angle, we have

Hypotenuse = Leg√2

So, we have

x = 8√2x = 6x = 5x = 2√2

Calculating the values of x and y in the triangles

Here, we use the trigonometry ratios

figure 5

cos(60) = 7/y

y = 14

x = √(14² - 7²)

x = 7√3

figure 6

cos(30) =2√3/y

y = 4

x = √(4² - (2√3)²)

x = 2

figure 7

cos(60) = x/10√3

x = 5√3

y = √((10√3)² - (5√3)²)

y = 15

figure 8

sin(30) = x/18

x = 9

y = √(18² - 9²)

y = 9√3

The areas of the figures

Here, we have

Area = (d/√2)²

Area = (16/√2)²

Area = 128

Area = 13 * 6 * sin(60 degrees)

Area = 39√3

The tangents of the acute angles

Here, we have

tan(K) = 48/14 = 24/7

tan(J) = 14/48 = 7/24

tan(D) = 6√2/3 = 3√2

tan(E) = 3/6√2 = √2/4

Calculating the values of x in the triangles

Here, we have

tan(23) = x/53

x = 22.50

tan(43) = 36/x

x = 38.61

tan(28) = x/y

tan(45) = x/82

So, we have

x = 82 and tan(28) = 82/y

x = 82 and y = 154.2

The height of the building

Here, we have

tan(65) = h/30

h = 64.34

Finding RS

Here, we have

RQ = 14tan(56)

QS = 14tan(32)

So, we have

RS = RQ - QS

RS = 14tan(56) - 14tan(32)

Evaluate

RS = 12

Hence, the length RS is 12 units


Read more about right triangles at

https://brainly.com/question/2437195


#SPJ1

what group of materials in exterior envelopes survive moisture from rainfall and condensation for long periods without major deterioration?

Answers

The term "moisture-resistant materials" refers to a class of materials used in external coverings that can endure moisture from condensation and rainwater for extended periods without suffering significant degradation.

These materials are made to endure moisture contact without suffering serious deterioration, decay, or harm. Concrete, stone, metal, glass, and some kinds of treated timber are a few typical examples of moisture-resistant materials used in external envelopes.

These materials are extremely robust and resistant to moisture-related harm over time due to their innate qualities, which include low porosity, high density, and resistance to rot and decline.

Learn more about moisture-resistant materials at

https://brainly.com/question/29410905

#SPJ4

explain how a piece of the igneous rock granite and a piece of the metamorphic rock slate could be found in the sedimentary rock known as conglomerate.

Answers

Answer:

The presence of a piece of granite and a piece of slate in a sedimentary rock conglomerate suggests that the rock has undergone a process of weathering, erosion, and deposition. Conglomerate is a type of sedimentary rock formed from rounded gravel and pebble-sized rock fragments that have been transported and deposited by water or wind. These rock fragments are typically cemented together by mineral deposits, creating a solid rock.

The granite and slate could have been exposed to weathering, erosion, and transport by natural agents such as water, wind, or ice. These agents could have broken the granite and slate into smaller pieces, which were then transported by water or wind and eventually deposited in the same location. Over time, the pieces of granite and slate would have become cemented together with other rock fragments, forming a conglomerate.

Alternatively, the granite and slate may have been present in the original rock formation that was weathered, eroded, and transported to form the conglomerate. As the rock formation was broken down, the different types of rock that it contained, including the granite and slate, would have been transported and deposited in the same location, eventually becoming cemented together to form the conglomerate.

Overall, the presence of granite and slate in a sedimentary rock conglomerate is a result of the complex processes of weathering, erosion, transport, and deposition that have occurred over geological time.

A piece of the igneous rock granite and a piece of the metamorphic rock slate could be found in the sedimentary rock known as conglomerate because they could have been eroded and transported by water or wind and deposited along with other sediments.

Conglomerate is a type of sedimentary rock that is composed of large, rounded rock fragments that are larger than 2 millimeters in diameter. Conglomerates may also contain smaller particles such as sand, silt, or clay-sized minerals, as well as various organic materials.

The conglomerate forms as a result of deposition and consolidation of gravel, sand, and pebble-sized sediments. Conglomerates typically form near the base of a stream or river, where the water flow is fast enough to move the larger rock fragments, but not fast enough to transport them far from their source.

Igneous rocks like granite are formed from the solidification of magma or lava. Over time, these rocks may be weathered and eroded by natural forces like water, wind, or ice. As these rocks are broken down into smaller particles, they are transported and deposited in other locations.Sedimentary rocks are formed from the accumulation of sediment. When these sediments are transported, they may be mixed with other materials, including rock fragments from other sources. Therefore, a piece of the igneous rock granite could be found in the sedimentary rock known as conglomerate if it was eroded and transported by water or wind and deposited along with other sediments.

Metamorphic rocks like slate are formed from other rocks that have been subjected to high temperatures and pressures. These rocks may be exposed at the surface through natural processes like erosion, or they may be uplifted through tectonic activity. Once exposed, they may be broken down into smaller particles and transported by natural forces.When these sediments are deposited and compacted, they may form sedimentary rocks like conglomerates. Therefore, a piece of the metamorphic rock slate could be found in the sedimentary rock known as conglomerate if it was eroded and transported by water or wind and deposited along with other sediments.

Know more about Conglomerate here:

https://brainly.com/question/30438734

#SPJ11

what kinda challenges do the Andean And Midlatitude countries face

Answers

Answer:

Andean countries such as Colombia, Ecuador or Perú have the challenge of mining the regions minerals.

Explanation:

Explain how the data above support the hypothesis that a destabilized polar jet stream caused the cold spell seen in the midwest.

Answers

It would be clear evidence that the jet stream is crucial in controlling weather patterns in the area if data from these sources (and possibly others) confirmed the theory that a destabilized polar jet stream was to blame for the cold spell in the Midwest.

Why has the polar jet stream become unstable due to climate change?

With the transition, higher latitudes are becoming warmer and the temperature gap between the polar areas and the warmer mid-latitudes is decreasing. Polar air is brought further south as a result of the polar jet stream being weaker and less stable, forcing it to dip into lower latitudes.

What is the relationship between the polar jet stream and the polar vortex?

Polar jetstream as opposed to a polar vortex-

The air within becomes increasingly isolated from warmer latitudes and becomes colder as the winds get stronger. The polar jet stream, which is located in the troposphere, tends to move northward when the Arctic polar vortex is particularly powerful and stable (left globe).

To know more about jet stream visit:

https://brainly.com/question/31367235

#SPJ9

what is itcz and how does the wind blow in itcz, including surface wind, upper-level wind, and the vertical air movement that connnecting them?

Answers

The Intertropical Convergence Zone (ITCZ) is a region near the Earth's equator where trade winds converge. The region is also characterized by cloudy skies, rainy weather, and low pressure.

The ITCZ's location varies seasonally, moving north or south of the equator depending on the location of the sun. The ITCZ's position is determined by the location of the sun, which is directly overhead at noon at the equator, causing the air to rise and creating a low-pressure region.

As the air rises, it cools and condenses, resulting in rain and thunderstorms. The ITCZ's surface winds are the trade winds, which move towards the equator from the northeast in the Northern Hemisphere and the southeast in the Southern Hemisphere.

The upper-level winds are known as the easterly winds, which blow from east to west. They are responsible for bringing moisture from the Atlantic and Indian Oceans to the ITCZ. The vertical air movement is the convergence of the trade winds, which causes air to rise and creates a low-pressure zone.

The rising air cools and condenses, resulting in the formation of clouds and precipitation. As a result, the ITCZ is responsible for much of the Earth's precipitation.

For more question on low-pressure region

https://brainly.com/question/13942487

#SPJ11

Earth is more than 70 million kilometers closer to the Sun than Mars. True or False

Answers

False. Earth is actually closer to the Sun than Mars, but the difference in distance is not as large as 70 million kilometers.

On average, the distance between the Sun and Earth is about 149.6 million kilometers, while the distance between the Sun and Mars is about 227.9 million kilometers. Therefore, Mars is actually more than 78 million kilometers further from the Sun than Earth.The distance between a planet and the Sun is determined by its orbit, which is influenced by a number of factors including gravity and the planet's velocity. The orbits of Earth and Mars are both elliptical, which means that they are not perfectly circular. This can cause variations in their distance from the Sun at different times in their orbits. While Earth is closer to the Sun on average, there are times when Mars can be closer due to the shape of its orbit. However, overall, Mars is much further from the Sun than Earth, with a difference of more than 78 million kilometers in their average distances

To learn more about Earth here:

https://brainly.com/question/31064851

#SPJ1

why did only wealthy do tourism before advances in transport​

Answers

Answer:

Because it was they who had access to water transport, but for ordinary people it was very expensive.

Answer:

Limited access to transportation: Traveling long distances was difficult and time-consuming, and the only available modes of transport, such as horses or carriages, were expensive and not accessible to everyone. This made travel a luxury that only the wealthy could afford.

Why were transport ships ineffective in WW2

Answers

Answer: During the Second World War, Britain depended on vital supplies of food, equipment and raw materials from overseas, notably from North America and the Empire. These goods were transported in thousands of merchant ships, which were vulnerable to attack by German submarines (U-boats)

Explanation:

Other Questions
Please help me with this question!!!!!!!!!!!!!!!!!!!!! (3 1/2 hours) how many minutes? krzysztof Penderecki Thrne la mmoire des victimes dHiroshima for #10: evaluate double integral by converting to polar coordinates: How did Annas personality and character change from the beginning to the end of the story every morning when james logs into his computer and attempts to access microsoft 365, he is asked to enter his password. after that, he is sent a text on his mobile phone with a six-digit code he must enter. in terms of multifactor authentication, his password is something he knows. what is the text message? What are the pros and cons of using alternation ranking method? to compute gdp, we group of answer choices add up the wages paid to all workers. add up the costs of producing all final goods and services. add up the market values of all final goods and services. take the difference between the market values of all final goods and services and the costs of producing those final goods and services. 4.25 x 10^24 atoms N ---> mass in grams numberLecturer's surname and initialsGroupssessment dateSubtask 1: List Ake a tick mark in the correct column.Constructing a wall to divide an officeWeekly meetingRecording absentees and leave of team membersDeveloping a new productTraining for team leadersPROJECTNON-PROJECTTOTl What is the value of {-4,6]? KangarooWhich hind leg measurement is most likely from an adult animal with a hind leg thatis homologous to the kangaroo hind leg?O a grasshopper leg 2 cm longa rabbit leg 8 mm longO a bullfrog leg 30 cm longO a crab leg 50 mm long Explain why each author chose to use the text structure for his writing. Machine has three speed settings, low medium fast the low setting produces 110 units with a 90% quality rating the medium setting produces 120 units with an 80% quality rating in the fast setting produces 140 units with a 70% quality rating if each unit sells for $20 what shutting makes the company the most money in sales win percentage not meeting quality standards cannot be sold an aluminum plate 0.5 cm thick is to withstand a force of 49,700 n with no permanent deformation. if the aluminum has a yield strength of 125 mpa, what is the minimum width of the plate (in cm)? Complete the sentence with the present perfect form of the verb.raiseThe Women in Technology group on campus RAISEDalmost fifty thousanddollars in scholarship funds, which will be made available to women who are interested inpursuing careers in technology. A patient at the pharmacy counter is upset because they cannot afford the medication they need urgently. What does "proof" mean? which of the following distinguishes lymphatic vessels from veins? which of the following distinguishes lymphatic vessels from veins? lymphatics lack the three tunics present in veins. lymphatics transport fluids toward the heart. lymphatics have valves, while veins do not. lymphatics collect larger materials a distinct comparative approach to politics first emerged with the work of a. hobbes. b. rousseau. c. marx. d. machiavelli.