a german shepherd puppy weighed 25 pounds at 4 months old and 31 pounds at 5 months old. what is the percent increase or decrease of its weight? show hints

Answer:

y=2.05x

Step-by-step explanation:

Figure out what the total cost is for 1 of them then you put that in as your M value, then X stands for number of sheets so 2.05 multiplied by the number of sheets sold you get your Y which is the total cost in dollars for x sheets.

Answer:10

Step-by-step explanation: 14/4= 3.5, 35/3.5=10

Even a process that is functioning as it should will not yield output that conforms exactly to a standard because of natural variation.

The natural variation is the variability in the output of a system that is caused by factors that are not controlled.This type of variation is also known as common cause variation.

The output of the system is changed by natural variation in such a way that it deviates from a fixed standard. Despite this, natural variation is usually present in any system, and it cannot be entirely eliminated.

There will always be some variation, and it is vital to understand how much of it is acceptable. The output of the system may be brought back into conformity with the standard by removing the cause of special cause variation.

Measurement errors can be caused by a variety of factors, including incorrect equipment calibration, user error, or environmental factors.

These errors may be distinguished from natural variation and special cause variation because they are caused by the measurement process rather than the system itself.

For similar question on functioning.

https://brainly.com/question/24748644

#SPJ11

Answer:

eqn of line : x-3y=15

slope1=m= -coefficient of x/coefficient of y=1/3

As lines are parallel slope must be equal.

slope3=m'=1/3

passing points of second line =(0,7)

eqn of line = (y-y')=m(x-x')

=(y-7)=1/3(x-0)

=y-7=1/3x

=1/3x-y+7=0

=x-3y+21=0

Step-by-step explanation:

Answer:

0.15 expressed as a fraction in its simplest form is 3/20.

Step-by-step explanation:

To express a terminating decimal as a fraction:

Write the decimal as a fraction by dividing it by 1:

[tex]\boxed{\dfrac{0.15}{1}}[/tex]

Multiply the numerator and denominator by 10 for every number after the decimal point.

As there are two numbers after the decimal point, multiply the numerator and denominator by 100:

[tex]\boxed{\dfrac{0.15 \times 100}{1 \times 100}=\dfrac{15}{100}}[/tex]

Find the highest common factor (HCF) of the numerator and denominator.

Therefore, the HCF of 15 and 100 is 5.

Divide the numerator and denominator by the HCF to reduce the fraction to its simplest form:

[tex]\boxed{\dfrac{15 \div 5}{100 \div 5}=\dfrac{3}{20}}[/tex]

0.15 expressed as a fraction in its simplest form is 3/20.

Answer:

See below, please.

Step-by-step explanation:

Answer:

y=4

Step-by-step explanation:

2y+4=12

2y=8

y=4

answer: y=4

Answer:

y=4

Step-by-step explanation:

2y+4=12

2y=8

y=4

Therefore , the solution of the given problem of equation comes out to be the parabola expands upwards, with the vertex being a minimum point.

Complex algorithms frequently employ variable words to demonstrate consistency between two conflicting assertions. Equations are academic expressions that are used to demonstrate the equality of different academic figures. In this instance, normalization results in b + 7 rather than a singular formula that divides 12 into two components along with is able to be utilized to evaluate data obtained from y + 7.

Here,

A parabolic route taken by the eagle as it soars into the sky and then descends to the ground is shown by the equation

=> h = t² - 10t + 25.

The vertex of the equation, which is provided by the formulas

=> t = -b/2a and h = f(t),

where a, b, and c are the coefficients of the quadratic equation, can then be found in order to graph it.

Here,

=> a = 1, b = -10, and c = 25.

Consequently, the apex is at t = 5 and h = f(5) = 0, respectively.

Given that t² has a positive coefficient, the parabola expands upwards, with the vertex being a minimum point.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Answer:

cylinder

Step-by-step explanation:

A cylinder has 2 circular faces and no vertices.

The expression that equals ∠BEC is 3x - 27, and the answer is B.

First, we find the measure of ∠BEC using the given information and the value of x. We get

Then, we use the fact that ∠AED is vertically opposite to ∠BEC, so ∠AED = ∠BEC = 63 degrees.

Finally, we need to find the expression among the given choices that equals 63 when x = 30.

Option A is too large, option C is too large, and option D is too small. Option B gives us

which matches the measure of ∠BEC. Therefore, the answer is B.

Learn more about Angles:

https://brainly.com/question/25716982
#SPJ4

Complete Question:

If the measure of BEC is (2x+3) and x=30, which expression could represent the measure of AED?

The number of distinct sequences of letters is 8 × 26⁷.

How many distinct sequences of letters can you make if each sequence is ten letters long and contains the subsequence die?

We have to find the number of distinct sequences of letters that can be made. Here, the word 'die' can occur in any position of the ten-letter sequence. Therefore, we have to find the number of distinct sequences of seven letters that can be formed, which are not related to the word 'die'. The number of distinct sequences of seven letters that can be formed with no restrictions is:

26 × 26 × 26 × 26 × 26 × 26 × 26 = 26⁷

The word 'die' has three letters, and it can be placed in any of the eight positions of the seven-letter sequence (that is not related to the word 'die'). We have a total of 8 possibilities to choose where to put the word 'die'.Thus, the number of distinct sequences of letters is:

8 × 26⁷ (or) 703, 483, 260, 800.

The number of distinct sequences of letters is 8 × 26⁷.

To learn more about distinct sequences refer :

https://brainly.com/question/14575469

#SPJ11

The product of the eigenvalues is equal to the determinant of the matrix. In other words, if λ1, λ2, ..., λn are the eigenvalues of a square matrix A, then det(A) = λ1 * λ2 * ... * λn. This relationship also holds true for both matrices A and C.

To enter matrices A and C in MATLAB, we can use the following commands:

A = [6, -1, 0; -1, -2, -1; 0, -1, 2];

C = [1, -1, 1; -1, 2, 0; 0, -1, 2];

To find the trace of A and C, we can use the following commands:

trace_A = trace(A);

trace_C = trace(C);

The trace of matrix A is 6 - 2 + 2 = 6, and the trace of matrix C is 1 + 2 + 2 = 5.

To find the eigenvalues of A and C, we can use the eig() function in MATLAB:

[eig_vec_A, eig_val_A] = eig(A);

[eig_vec_C, eig_val_C] = eig(C);

The eigenvalues of matrix A are -1, 1, and 6, and the eigenvalues of matrix C are 1, 1, and 2.

There is a relationship between the trace of a square matrix and its eigenvalues. Specifically, the sum of the eigenvalues is equal to the trace of the matrix. In other words, if λ1, λ2, ..., λn are the eigenvalues of a square matrix A, then trace(A) = λ1 + λ2 + ... + λn. This relationship holds true for both matrices A and C.

To find the determinant of A and C, we can use the following commands:

det_A = det(A);

det_C = det(C);

The determinant of matrix A is 12, and the determinant of matrix C is 5.

There is also a relationship between the eigenvalues and the determinant of a square matrix. Specifically, the product of the eigenvalues is equal to the determinant of the matrix. In other words, if λ1, λ2, ..., λn are the eigenvalues of a square matrix A, then det(A) = λ1 * λ2 * ... * λn. This relationship also holds true for both matrices A and C.

To learn more about eigenvalues  visit: https://brainly.com/question/29749542

#SPJ11

To solve this problem, we need to convert the hexadecimal numbers (20cba)16 and (a02)16 to decimal form, add them together, and then convert the result back to hexadecimal form.

(20cba)16 = 2x16^4 + 12x16^3 + 11x16^2 + 10x16^1 = 131402

(a02)16 = 10x16^2 + 0x16^1 + 2x16^0 = 256

Adding the two decimal numbers together gives us:

131402 + 256 = 131658

To convert this decimal number back to hexadecimal form, we can use the repeated division method.

131658 / 16 = 8228 remainder 10 (A)

8228 / 16 = 514 remainders 4 (4)

514 / 16 = 32 remainder 2 (2)

32 / 16 = 2 remainder 0

2 / 16 = 0 remainder 2

Therefore, (20cba)16 + (a02)16 = (131658)10 = (2002A)16.

To find their product, we can multiply the two decimal numbers together and then convert the result to hexadecimal form.

131402 x 256 = 33559552

Converting this decimal number to hexadecimal form gives us:

33559552 / 16 = 2097472 remainder 0

2097472 / 16 = 131092 remainder 0

131092 / 16 = 8193 remainder 4 (4)

8193 / 16 = 512 remainders 1 (1)

512 / 16 = 32 remainder 0

32 / 16 = 2 remainder 0

2 / 16 = 0 remainder 2

Therefore, the product of (20cba)16 and (a02)16 is (33559552)10 = (2011004)16.

For more questions like numbers (20cba)16, visit the link below:

https://brainly.com/question/9713995

#SPJ11

The equation of the circle with center at (8, 2) that passes through (17, 14) in standard form is (x - 8)² + (y - 2)² = 225

In your problem, we are given that the center of the circle is located at (8, 2) and that the circle passes through the point (17, 14). To find the equation of this circle, we need to use the standard form of the equation of a circle, which is:

(x - h)² + (y - k)² = r²

where (h, k) is the center of the circle and r is the radius of the circle.

To find the radius of the circle, we can use the distance formula between the center of the circle and the point on the circle that is given to us. The distance formula is:

d = √((x₂ - x₁)² + (y₂ - y₁)²)

where (x₁, y₁) is the center of the circle and (x₂, y₂) is the point on the circle that is given to us.

Plugging in the values we have, we get:

d = √((17 - 8)² + (14 - 2)²) = √(81 + 144) = √(225) = 15

So the radius of the circle is 15.

Now we can plug in the values we have into the standard form of the equation of a circle:

(x - 8)² + (y - 2)² = 15²

which simplifies to:

(x - 8)² + (y - 2)² = 225

To know more about equations here

https://brainly.com/question/10413253

#SPJ4

Answer:

Data Visualization Tools

Step-by-step explanation:

The difference between the lengths of the radii is approximately 4.70 cm.

What is circle ?

A circle is a two-dimensional geometric shape that is defined as the set of all points in a plane that are at a given distance (called the radius) from a given point (called the center). It can also be defined as the locus of all points that are equidistant from a given point. A circle is a closed curve and its circumference is the distance around the circle.

We know that the formula for the circumference of a circle is:

C = 2πr

Where C is the circumference and r is the radius.

For circle A, we have:

21.99 = 2πr

Dividing both sides by 2π, we get:

r = 3.5

For circle B, we have:

51.52 = 2πr

Dividing both sides by 2π, we get:

r = 8.2

The difference between the radii is:

8.2 - 3.5 = 4.7

Rounding to the nearest hundredth, we get:

4.7 ≈ 4.70

Therefore, the difference between the lengths of the radii is approximately 4.70 cm.

To know more about circle visit:

https://brainly.com/question/24375372

#SPJ1

Answer:

a) 640 ml

b) 40 ml

Step-by-step explanation:

The ratio of lime to lemonade for the fizzy drink is 5 : 3 or as a fraction that would be

[tex]\dfrac{\text{Lime juice}}{\text{Lemonade}}= \dfrac{5}{3}[/tex]

[tex]\text{Therefore the ratio of lemonade to lime }\\\\ = \text{reciprocal of $ \dfrac{5}{3} $} }\\\\= \dfrac{3}{5}[/tex]

Part a)

For  all 400 ml of  lime juice we would need
[tex]\dfrac{3}{5} \times 400 \;ml = 3 \times 80 = 240 \;ml[/tex]  

Total amount of fizzy drink that can be maade
= amount of lime juice + amount of lemonade

= 400 + 240

= 640 ml

This is the answer to Part a)

Part b)

If Gianni has only 280 ml and is using all 400 ml of lime juice then the amount of lemonade used as calculated in part 1) is 240ml

That means the amount of lemonade left over = 280 - 240 = 40 ml

The equation will be :20 + 8.95 × 10 = $109.50

Here the total cost is $109.50.

Total cost refers to the total cost of production, which includes the fixed and variable parts of the cost. In economics, total cost is described as the cost required to produce a product. The total cost consists of two parts and they are: Fixed costs: These are the costs that do not change.

According to the Question:

C = 20 + 8.95× t

This can be read as : The total cost (C) will be $20 (setup fee) plus $8.95 for each t-shirt ordered (t).

The equation will be:

10 shorts would be 20 + 8.95*10, or $109.50.

Complete Question:

A t-shirt company charges a $20.00 set-up fee plus $8.95 for each t-shirt that is screen-printed with a school’s logo. Write a function that can be used to find the total cost, C, for purchasing and screen printing, t, number of t-shirts.

Learn more about Equation:

https://brainly.com/question/29538993

#SPJ4

The truck must make 2 trips tο deIiver 7 m³ οf sand.

VοIume is the amοunt οf space οccupied by an οbject οr substance. It is typicaIIy measured in cubic units such as cubic meters, cubic centimetres, οr cubic feet.

Tο caIcuIate the number οf trips the truck must make tο deIiver 7 m³ οf sand, we need tο determine hοw much sand the truck can carry per trip.

The vοIume οf the truck bed can be caIcuIated as fοIIοws:

VοIume οf the truck bed = Iength x width x height

= 2.5 m x 1.5 m x 1 m

= 3.75 m3

Therefοre, the truck can carry 3.75 m³ οf sand per trip.

Tο deIiver 7 m³ οf sand, we divide the tοtaI amοunt οf sand by the amοunt οf sand the truck can carry per trip:

Number οf trips = tοtaI amοunt οf sand / amοunt οf sand per trip

= 7 m³ / 3.75 m³ per trip

= 1.87

Since we cannοt make a partiaI trip, we must rοund up tο the nearest whοIe number.

Therefοre, the truck must make 2 trips tο deIiver 7 m³ οf sand.

To learn more about Volume from the given link

https://brainly.com/question/463363

#SPJ1

Using the idea of comparable ratio, we may determine x:y:z to be 3:16:1, given as x:y=3:4 and y:z=1:4.

When the second number in the ordered pair, b, is not equal to 0, the ratio is expressed as a/b. An equation wherein two ratios are made equal is known as a percentage. As an illustration, you could express the ratio as 1: 3 if there is 1 guy and 3 girls (for every one boy there are 3 girls)

Given that y is present in both ratios, we may begin by determining its value:

y = (4/1) * (y/z), multiplied by 4, which is the reciprocal of 1/4.

y = 4(y/z)

y/z = 1/4

z/y = 4/1

We can now find x by using the value of y:

x/y = 3/4 (given)

x = (3/4) * y x = (3/4) * 4(z/y) (simultaneously inserting y/z)

x = 3z

As a result, x:y:z = 3z: 4 is the ratio of x:y:z.

y : z\s= 3 : 4(4) : 1\s= 3 : 16 : 1

So, x:y:z = 3:16:1 is the solution.

To know more about ratio visit:

https://brainly.com/question/29467965

#SPJ1

The probability of either die rolling the value 3 or both dice rolling even values is 5/9.

The probability of rolling a 3 on a single die is 1/6, so the probability of either die rolling a 3 is 2/6 or 1/3 (since there are two dice).

The probability of rolling an even number on a single die is 1/2 (since there are three even numbers and three odd numbers on a 6-sided die). The probability of rolling even values on both dice is the product of the probability of each die rolling an even value, which is (1/2) x (1/2) = 1/4.

To find the probability of either die rolling a 3 or both dice rolling even values, we need to subtract the probability of rolling both a 3 and an even value (since we would be double-counting this case). The only way to roll both a 3 and an even value is to roll two 6's, so the probability of this happening is 1/36.

Therefore, the probability of either die rolling 3 or both dice rolling even values is:

P(either die rolling 3 or both dice rolling even) = P(die 1 = 3 or die 2 = 3 or both dice even) - P(both dice = 6)

= (1/3 + 1/3) + (1/4 - 1/36)

= 5/9

Hence, the probability is 5/9.

To know more about probability refer here:

https://brainly.com/question/14938816#

#SPJ11

The number of ways a person can toss a coin 15 times so that the number of tails is between 4 and 11 inclusive is the product of the total number of ways and the sum of probabilities for k=4 to k=11 inclusive.

Binomial distribution refers to the issue of tossing a coin 15 times and getting a specific amount of tails. The following gives the binomial distribution formula:

[tex]P(X=k) = C(n,k) (n,k) * p^k * (1-p)^(n-k) (n-k)[/tex]

Where P(X=k) denotes the likelihood that there will be k tails in n tosses, p is the likelihood that there will be one tail in a single toss, and C(n,k) denotes the number of combinations of n objects that will be picked up k at a time.

The total of probability for k=4 to k=11 inclusive must be calculated in order to find the solution. This is,

P (4), P (5), P (6), P (7), P (8), P (9), P (10) and P (11)

We can figure out and add up each of these probability using the technique above. As an alternative, we can compute the probabilities using a statistical software programme or a binomial probability table.

A person can flip a coin 15 times in a total of 32,768 different ways. By calculating the total number of ways by the sum of probabilities for k=4 to k=11 inclusive, one may get the number of ways that the number of tails is between 4 and 11 inclusive.

Learn more about coin here:

https://brainly.com/question/8585991

#SPJ4

Answer:5

Step-by-step explanation:

angle h and k are equal (because alternate exterior angles are equal)

2x+7=5x-8

8+7=5x-2x

15=3x

15/3=x

5=x

h=2x+7=2*5+7=17degrees

Answer: y -5

Step-by-step explanation:

One way to do this is to subtract 1.8x from both sides of the equation, which gives:

x - 1.8x = 32

Simplifying the left-hand side, we get:

-0.8x = 32

To solve for x, we can divide both sides of the equation by -0.8:

x = 32 / (-0.8)

Simplifying, we get:

x = -40

Answer: 56448² ft

Step-by-step explanation:

7 x 4 x 18 x 4 x 7 x 4 = 56448 and square it to get 56448² and then add the unit to get  56448 ft² :)

Yes, it is possible for all solutions of a homogeneous system of ten linear equations in twelve variables to be multiples of one fixed nonzero solution.

This occurs when the rank of the matrix of coefficients of the system is less than the number of variables, in this case 12. In this case, the system has infinitely many solutions, all of which can be expressed as a multiple of one nonzero solution.

To illustrate this concept, consider the following system of two equations in three variables:

[tex]2x + y + 3z = 0[/tex]

[tex]3x + y + 2z = 0[/tex]

The matrix of coefficients for this system is:

[tex][[3, 1, 2][/tex]

[tex][2, 1, 3]][/tex]

The rank of this matrix is 2, which is less than the number of variables, 3. Therefore, this system has infinitely many solutions, all of which can be expressed as a multiple of the following nonzero solution:

[tex](x, y, z) = (2, -3, 1)[/tex]

In other words, any solution [tex](x, y, z)[/tex] of the system will be of the form [tex](2a, -3a, a)[/tex], where a is any real number. This concept can be generalized to systems of ten linear equations in twelve variables.

In conclusion, when the rank of the matrix of coefficients of a homogeneous system of linear equations is less than the number of variables, then all solutions of the system are multiples of one fixed nonzero solution.

See more about linear equations at: https://brainly.com/question/28144615

#SPJ11

The ratio of boys to total kids can be expressed in three different ways fraction, decimal, and percent which are 27:59,  0.4576 and 45.76% respectively.

First, let's find the total number of kids in the program. The total number of kids in the program is the sum of boys and girls. Total kids = boys + girls = 27 + 32 = 59. Now that we have the total number of kids, we can find the ratio of boys to total kids in three different ways. 1. Fraction: The ratio of boys to total kids can be expressed as a fraction, where the numerator is the number of boys and the denominator is the total number of kids. Boys: Total kids = 27:59 This fraction cannot be simplified.

2. Decimal: The ratio of boys to total kids can also be expressed as a decimal. To find the decimal, divide the number of boys by the total number of kids. Boys/Total kids = 27/59 = 0.4576 (rounded to four decimal places). 3. Percent: The ratio of boys to total kids can also be expressed as a percentage. To find the percentage, multiply the decimal by 100. Boys/Total kids × 100 = 0.4576 × 100 = 45.76%. Therefore, the ratio of boys to total kids can be expressed as a fraction, decimal, and percent as shown above.

To know more about ratio and percentage click here:

https://brainly.com/question/30033832

#SPJ11

To find the difference between 3/5 and 1/2 using fraction strips, we can use strips that are divided into fifths and halves, respectively.the difference between 3/5 and 1/2 is 2/10 or 1/5, , the answer in the simplest form is 1/5.

First, we'll need to represent each fraction using the fraction strips.

For 3/5, we can use three fifths strips to represent the numerator and put them together to form a whole.

For 1/2, we can use one half strip and cut it into two equal parts to represent the numerator.

Next, we'll need to compare the two fractions by placing them side by side.

We can see that the two fractions do not have the same denominator, so we need to find a common denominator to make the comparison easier.

The smallest common multiple of 5 and 2 is 10, so we can represent 3/5 using six tenths strips, and 1/2 using five tenths strips.

We can see that there are two tenths strips that are not shared between the two fractions.

Therefore, the difference between 3/5 and 1/2 is 2/10 or 1/5, , the answer in the simplest form is 1/5.

Learn more about fractions here:

https://brainly.com/question/10354322

#SPJ9

The probability of x being exactly 48 when it is uniformly distributed between 45 and 150 is 1/105

Since x is uniformly distributed between 45 and 150, the probability of x taking any particular value in this range is the same. Let this probability be denoted by P(x).

To find P(x = 48), we need to first check if 48 lies within the range of values that x can take. In this case, 48 lies within the range of 45 and 150, so it is a possible value for x.

Since the distribution is uniform, the probability of x taking any particular value between 45 and 150 is given by

P(x) = 1 / (150 - 45) = 1 / 105

Therefore, the probability of x being exactly 48 is

P(x = 48) = 1 / 105

Learn more about probability here

brainly.com/question/28348710

#SPJ4

The given question is incomplete, the complete question is:

A random variable x is uniformly distributed between 45 and 150. what is the probability of x = 48?