A conical container can hold 120 pie cubic centimeters of water the diameter of the base of the container is 12 centimeters the height of the containers centimeters. If the diameter and height were both doubled the containers capacity would be times its original capacity

Answers

Answer 1
The volume of a cone can be calculated using the formula V = (1/3)πr^2h, where V is the volume, r is the radius of the base, and h is the height.

Given that the diameter of the base is 12 centimeters, the radius (r) is half of the diameter, which is 6 centimeters. The original height of the container is h centimeters.

Using the formula for the volume of a cone, we have:

V = (1/3)π(6^2)h
V = 36πh

We are told that the container can hold 120π cubic centimeters of water. Therefore:

36πh = 120π

To find the value of h, we divide both sides of the equation by 36π:

h = 120π / (36π)
h = 10/3

So the original height of the container is 10/3 centimeters.

Now, if we double both the diameter and height of the container, the new diameter would be 2 * 12 = 24 centimeters, and the new height would be 2 * (10/3) = 20/3 centimeters.

The new volume (V') can be calculated using the same formula:

V' = (1/3)π(12^2)(20/3)
V' = 480π/9
V' = 160π/3

To find the ratio of the new volume to the original volume, we divide the new volume by the original volume:

V' / V = (160π/3) / (120π)
V' / V = (160/3) / (120)
V' / V = 4/3

Therefore, the capacity of the container after doubling the diameter and height would be 4/3 times its original capacity.

If possible, can you mark me brainliest?

Related Questions

A box contains 240 lumps of sugar. Five lumps are fitted across the box and there were three layers. How many lumps are fitted along the box?

Answers

If five lumps of sugar are fitted across the box, and there are three layers, we can calculate the total number of lumps by multiplying the number of lumps across each layer by the number of layers.

Number of lumps across each layer = 5
Number of layers = 3

Total number of lumps = Number of lumps across each layer × Number of layers
Total number of lumps = 5 × 3 = 15

Therefore, 15 lumps of sugar are fitted along the box.


If it’s possible, please mark me brainliest!

Pls help I am stuck thank you so much

Answers

The perimeter of shape C is 30 cm shorter than the total perimeter of A and B.

What is the perimeter of a polygon?

The perimeter of a polygon is given by the sum of all the lengths of the outer edges of the figure, that is, we must find the length of all the edges of the polygon, and then add these lengths to obtain the perimeter.

Hence the perimeter of each shape is given as follows:

A = 2 x (5 + 12) = 34 cm.B = 2 x (4 + 9) = 26 cm.C = 12 + 5 + 9 + 4 = 30 cm.

Then the difference is given as follows:

34 + 26 - 30 = 30 cm.

More can be learned about the perimeter of a polygon at https://brainly.com/question/3310006

#SPJ1

d 1 1 logx tanx
dx x
    + + +

Answers

The expression you provided appears to be an integral with multiple terms involving logarithmic and trigonometric functions. To solve it, we need to break it down and evaluate each term separately.

Let's examine each term in the given expression:The integral of 1 with respect to x is simply x.The integral of 1/x is ln|x|.

The integral of tan(x) can be evaluated using a substitution or integration by parts technique, depending on the specific limits of integration or any additional context provided.

Without specific limits or further instructions, it's challenging to provide a precise solution or simplify the expression further. However, if you provide more information or clarify the problem statement, I can help you with a more detailed solution.

For more such questions on integral

https://brainly.com/question/26505535

#SPJ8

Roger can run one mile in 9 minutes. Jeff can run one mile in 6 minutes. If Jeff gives Roger a 1 minute head start, how
long will it take before Jeff catches up to Roger? How far will each have run?
They each will have run of a mile.

Answers

Both Roger and Jeff will have run a distance of 1/3 mile when Jeff catches up to Roger after 2 minutes.

To solve this problem, we can determine the relative speeds of Roger and Jeff.

Since Roger runs one mile in 9 minutes, his speed is 1/9 miles per minute.

Similarly, Jeff runs one mile in 6 minutes, so his speed is 1/6 miles per minutes.

Let's assume that Jeff catches up to Roger after t minutes.

In that time, Roger would have run (1/9) [tex]\times[/tex] t miles, and Jeff would have run (1/6) [tex]\times[/tex] t miles.

Since Jeff gives Roger a 1-minute head start, we can express their distances covered as:

Distance covered by Roger = (1/9) [tex]\times[/tex] (t+1) miles

Distance covered by Jeff = (1/6) [tex]\times[/tex] t miles

For Jeff to catch up to Roger, their distances covered must be equal. So we can set up the equation:

(1/9) [tex]\times[/tex] (t+1) = (1/6) [tex]\times[/tex] t

To solve for t, we can cross-multiply and simplify:

6(t+1) = 9t

6t + 6 = 9t

6 = 9t - 6t

6 = 3t

t = 2

Therefore, it will take 2 minutes for Jeff to catch up to Roger.

Substituting t = 2 back into the equations, we can find the distances covered by each:

Distance covered by Roger = (1/9) [tex]\times[/tex] (2+1) = 1/3 mile

Distance covered by Jeff = (1/6) [tex]\times[/tex] 2 = 1/3 mile

For similar question on distance.

https://brainly.com/question/28529268  

#SPJ8

Please answer ASAP I will brainlist

Answers

Answer:

Step-by-step explanation:

The given augmented matrix is already in reduced row echelon form. We can interpret it as a system of equations as follows:

1x + 0y + 0z + (4/5)w = 0

0x + 1y + 0z + 5w = 0

0x + 0y + 1z - 4w = 0

0x + 0y + 0z + w = -4

From the last row, we can see that w = -4. Substituting this value back into the previous rows, we get:

1x + 0y + 0z + (4/5)(-4) = 0

0x + 1y + 0z + 5(-4) = 0

0x + 0y + 1z - 4(-4) = 0

Simplifying these equations, we have:

x - (16/5) = 0

y - 20 = 0

z + 16 = 0

From the second equation, y = 20. From the third equation, z = -16. Substituting these values into the first equation, we get x - (16/5) = 0, which implies x = 16/5.

Therefore, the solution of the system is (16/5, 20, -16, -4).

So, the correct choice is:

A. The system has exactly one solution. The solution is

(16/5, 20, -16, -4)

Please awnser asap I will brainlist

Answers

The solution to the system is (a) (4/5, 5, -4, -4)

How to determine the solution to the system

From the question, we have the following parameters that can be used in our computation:

The augmented matrix

Where, we have

[tex]\left[\begin{array}{cccc|c}1&0&0&0&4/5\\0&1&0&0&5\\0&0&1&0&-4\\0&0&0&1&-4\end{array}\right][/tex]

From the above, we have the diagonals to be 1

And other elements to be 0

This means that the equation has been solved

So, we have

a = 4/5, b = 5, c = -4 and d =-4

Read more about matrix at

brainly.com/question/11989522

#SPJ1

What is the meaning of "⊂-maximal element"?

Answers

A "⊂-maximal element" in set theory refers to an element in a set that cannot be strictly contained within any other element of the set, indicating a maximum extent or boundary within that set.

In the context of set theory and Tarski's notion of finiteness, a "⊂-maximal element" refers to an element within a set that cannot be strictly contained within any other element of the set. Let's break down the meaning of this term.

Consider a set S and a partial order relation ⊆ (subset relation) defined on the power set P(S) of S. A "⊂-maximal element" u of a set A ⊆ S is an element that is not strictly contained within any other element of A with respect to the subset relation. In other words, there is no element v in A such that u is a proper subset of v.

Formally, for any u ∈ A, if there is no v ∈ A such that u ⊂ v, then u is a ⊂-maximal element of A. This means that u is as large as possible within A and cannot be extended by including additional elements.

In the context of T-finite sets, the existence of a ⊂-maximal element in every nonempty subset of the set guarantees that the set has a well-defined structure and does not continue indefinitely without boundaries.

It ensures that there is a definitive maximum element within each subset, which is a key characteristic of finiteness.

For more such question on theory. visit :

https://brainly.com/question/13458417

#SPJ8

Rearrange the equation so u is the independent variable

-12u+13=8w-3

w=_______

Answers

the answer is

w = -3/2 u + 2

find a positive and a negative coterminal angle for each given angle.

Answers

Answer:

D

Step-by-step explanation:

to find the coterminal angles add/ subtract 360° to the given angle

- 255° + 360° = 105°

- 255° - 360° = - 615°

1. Brandon went to a Formula One car race and used his stopwatch to time how fast his favorite driver, Fernando Alonso, went around the 4.7-kilometer track. Brandon started the timer at the beginning of the second lap, when the cars were already going fast. When he stopped the timer at the beginning of the third lap, one minute and three seconds had passed.

b. If you graphed the distance Fernando had traveled at the beginning of the lap and at the end of the lap, what would the coordinates of these points be? What would the

- and

-axes on this graph represent?

c. Find the equation of the line between these two points. What does this line represent?

d. If Fernando continues to average this speed, about how long do you think it would take him to finish the entire race? The race is 500 km.

Answers

Step-by-step explanation:

b. To determine the coordinates of the points on the graph, we need to consider the information given.

At the beginning of the second lap, one minute and three seconds had passed. Since each lap is 4.7 kilometers long, we can calculate the distance traveled at the beginning of the lap using the formula:

Distance = (Number of laps - 1) × Length of each lap

For the beginning of the second lap:

Distance = (2 - 1) × 4.7 km = 4.7 km

At the beginning of the third lap, one minute and three seconds had passed. Therefore, the distance traveled at the beginning of the third lap is:

Distance = (3 - 1) × 4.7 km = 9.4 km

The coordinates of the points on the graph would be:

Point A: (4.7 km, 4.7 km)

Point B: (9.4 km, 9.4 km)

On the graph, the x-axis would represent the distance traveled at the beginning of the lap, and the y-axis would represent the distance traveled at the end of the lap.

c. To find the equation of the line between the two points, we can use the slope-intercept form of a linear equation:

y = mx + b

where m is the slope and b is the y-intercept.

Using the coordinates of the two points (4.7 km, 4.7 km) and (9.4 km, 9.4 km), we can calculate the slope:

m = (y2 - y1) / (x2 - x1)

= (9.4 km - 4.7 km) / (9.4 km - 4.7 km)

= 4.7 km / 4.7 km

= 1

The slope of the line is 1.

Since the line passes through the origin (0, 0), the y-intercept (b) is 0.

Therefore, the equation of the line is:

y = 1x + 0

y = x

This line represents a one-to-one relationship between the distance traveled at the beginning of the lap and the distance traveled at the end of the lap.

d. To estimate how long it would take Fernando to finish the entire race if he continues to average the same speed, we need to find the time it takes for one lap.

In the given scenario, Brandon timed Fernando's lap for one minute and three seconds. Since there are 3 laps in total, we can divide the total time by the number of laps to find the average time per lap:

Average time per lap = Total time / Number of laps

= 1 minute and 3 seconds / 3

= 21 seconds

Since each lap is 4.7 kilometers long, we can calculate the speed:

Speed = Distance / Time

= 4.7 km / (1 minute + 21 seconds)

To estimate the time it would take Fernando to finish the entire race, we divide the total race distance by the speed:

Total race time = Total race distance / Speed

= 500 km / (4.7 km / (1 minute + 21 seconds))

To calculate the time, we need to convert 1 minute and 21 seconds to a decimal form:

1 minute + 21 seconds = 1 minute + (21 seconds / 60 seconds)

= 1 minute + 0.35 minutes

= 1.35 minutes

Substituting the values:

Total race time = 500 km / (4.7 km / 1.35 minutes)

= 500 km × (

1.35 minutes / 4.7 km)

= 500 km × 0.28723...

≈ 143.615 minutes

Therefore, it would take approximately 143.615 minutes for Fernando to finish the entire race if he continues to average the same speed.

A ship X sailing with a velocity (21 kmh 052⁰) observes a light fron a lighthuse due North. The bearing of the liglhthouse from the ship 20 minutes later is found to be 312. calcuate correct to thre sigificant figures

i) the orignal distance when the lighthoues is due West of the ship from the time when it is due North of the ship.

ii) the time in minutes, when the lighthouse is due West of the ship from the time when it is due North of the ship.

iii) the distance in km of the ship from the lighthoue when the light.hose is due West of the ship​

Answers

i) the original distance when the lighthouse is due West of the ship is 7 km

ii) The time in minutes when the lighthouse is due West of the ship is 21 minutes

iii) The distance in km of the ship from the lighthouse when the lighthouse is due West of the ship is 29.97 km

To solve this problem, we'll use the concepts of relative velocity and trigonometry. Let's break down the problem into three parts:

i) Finding the original distance when the lighthouse is due West of the ship:

The ship's velocity is given as 21 km/h at a bearing of 052°. Since the ship observed the lighthouse due North, we know that the angle between the ship's initial heading and the lighthouse is 90°.

To find the distance, we'll consider the ship's velocity in the North direction only. Using trigonometry, we can determine the distance as follows:

Distance = Velocity * Time = 21 km/h * (20 min / 60 min/h) = 7 km (to three significant figures).

ii) Finding the time in minutes when the lighthouse is due West of the ship:

To find the time, we need to consider the change in angle from 052° to 312°. The difference is 260° (312° - 052°), but we need to convert it to radians for calculations. 260° is equal to 260 * π / 180 radians. The ship's velocity in the West direction can be calculated as:

Velocity in West direction = Velocity * cos(angle) = 21 km/h * cos(260 * π / 180) ≈ -19.98 km/h (negative because it's in the opposite direction).

To find the time, we can use the formula:

Time = Distance / Velocity = 7 km / (19.98 km/h) = 0.35 h = 0.35 * 60 min = 21 minutes (to three significant figures).

iii) Finding the distance in km of the ship from the lighthouse when the lighthouse is due West of the ship:

We can use the formula for relative velocity to find the distance:

Relative Velocity = sqrt((Velocity in North direction)² + (Velocity in West direction)²)

Using the values we calculated earlier, we have:

Relative Velocity = sqrt((21 km/h)² + (-19.98 km/h)²) ≈ 29.97 km/h (to three significant figures).

Therefore, the ship is approximately 29.97 km away from the lighthouse when the lighthouse is due West of the ship.

For more question on distance visit:

https://brainly.com/question/30395212

#SPJ8

The following pie chart shows the number of rabbits, sheep, cattle, pigs on a farm
sheep
700
cattle
300
Pig
500
a. How many animals are on the farm? b.What represents the number of sheep on the farm
c. what percentage of the total number of animals are rabbits
d. Calculate the angle that represents number of pigs​

Answers

A) 1500 animals
B) 700/1500 sheep
C) I don’t see a number of rabbits or pie chart so I can’t tell
D) 1/3 animals are pigs

Let theta be an angle in quadrant two such that cos theta=-3/4. find the exact values of csc theta and cot theta

Answers

The exact values of csc(theta) and cot(theta) are: csc(theta) = 4√7/7

cot(theta) = -3√7/7.

To find the exact values of csc(theta) and cot(theta), given that cos(theta) = -3/4 and theta is an angle in quadrant two, we can use the trigonometric identities and the Pythagorean identity.

We know that cos(theta) = adjacent/hypotenuse, and in quadrant two, the adjacent side is negative. Let's assume the adjacent side is -3 and the hypotenuse is 4. Using the Pythagorean identity, we can find the opposite side:

[tex]opposite^2 = hypotenuse^2 - adjacent^2opposite^2 = 4^2 - (-3)^2opposite^2 = 16 - 9opposite^2 = 7[/tex]

opposite = √7

Now we have the values for the adjacent side, opposite side, and hypotenuse. We can use these values to find the values of the other trigonometric functions:

csc(theta) = hypotenuse/opposite

csc(theta) = 4/√7

To rationalize the denominator, we multiply the numerator and denominator by √7:

csc(theta) = (4/√7) * (√7/√7)

csc(theta) = 4√7/7

cot(theta) = adjacent/opposite

cot(theta) = -3/√7

To rationalize the denominator, we multiply the numerator and denominator by √7:

cot(theta) = (-3/√7) * (√7/√7)

cot(theta) = -3√7/7

Therefore, the exact values of csc(theta) and cot(theta) are:

csc(theta) = 4√7/7

cot(theta) = -3√7/7

for more such question on theta visit

https://brainly.com/question/29600442

#SPJ8

Describe the given translation: T(0, 7)

Answers

Answer:

ok t means some thing but zero and seven should be solved

Pamela bought a cat carrier to take her new kitten, Muffinnette, to the vet. The carrier is shaped like a rectangular prism that is 15 inches long, 9 1/2
inches wide, and 10 inches tall.
Which equation can you use to find the volume of the cat carrier, V?
What is the volume of the cat carrier?

Answers

To find the volume of a rectangular prism, we multiply its length, width, and height. In this case, the length of the cat carrier is 15 inches, the width is 9 1/2 inches, and the height is 10 inches.

The equation to find the volume, V, is:
V = length × width × height

Substituting the given values into the equation:
V = 15 inches × 9 1/2 inches × 10 inches

To simplify the calculation, we can convert the mixed fraction to an improper fraction:
V = 15 inches × (19/2) inches × 10 inches

Now, multiply the numbers:
V = (15 × 19 × 10) / 2 cubic inches

Calculating:
V = 2850 / 2 cubic inches
V = 1425 cubic inches

Therefore, the volume of the cat carrier is 1425 cubic inches.

Find the measure of the indicated arc:
55°
110°
O 250°
220°
?
Q
110 °
R
S

Answers

Answer:

? = 220°

Step-by-step explanation:

the measure of the inscribed angle QRS is half the measure of its intercepted arc QS , then

QS = ? = 2 × QRS = 2 × 110° = 220°

Polygon s is a scaled copy of polygon R.

What is the value of t

Answers

Using the concept of scale factor, the value of t in polygon s is:  7.2

How to use the scale factor?

The amount by which the shape is expanded or contracted is referred to as the scale factor. This is usually utilized when 2D shapes such as circles, triangles, squares and rectangles need to be enlarged. If y = Kx is an equation, K is the scaling factor for x.

From the given image, since Polygon s is a scaled copy of polygon R, then we can say that using the concept of scale factor, we have:

9/t = 12/9.6

t = (9 * 9.6)/12

t = 7.2

Thus, we can be sure that is the value of t of the polygon S using the concept of scale factor

Read more about Scale Factor at: https://brainly.com/question/25722260

#SPJ1

On a number line, a number, b, is located the same distance from 0 as another number, a, but in the opposite direction.
The number b varies directly with the number a. For example b = 22 when a = -22. Which equation represents this
direct variation between a and b?
b=-a
0-b=-a
O b-a=0
Ob(-a)=0

Answers

The equation that represents the direct variation between a and b in this scenario is:

b = -a

This equation states that b is equal to the opposite of a, which aligns with the given information that b is located the same distance from 0 as a but in the opposite direction.


What are the values of x and y?
A) x = 18√3; y = 9√3
B) x = 9; y = 9√3
C) x = 9√3; y = 9
D) x = 9√2; y = 9

Answers

The values of x and y are 9√3 and 9. Thus, option C is the answer.

From the figure, we know that angle A = 60°, angle C = 30° and side AC =18 units.

We have to use trigonometric ratios to find the values of x and y.

sin30° = Opposite side/Hypotenuse  

But, we also know that sin30° = 1/2

Substituting the value in the above equation, we get

1/2 = y/18

Thus, the value of y = 18/2 = 9.

Now, sin60° = Opposite Side/ Hypotenuse

sin60° = √3/2

Substituting the value, we get

√3/2 = x/18

Thus, x = 9√3.

Therefore, the values of x and y in the given triangle are 9√3 and 9.

Read more about Trigonometry ratios here:

https://brainly.com/question/13276558

A community is developing plans for a pool and hot tub. The community plans to form a swim team, so the pool must be built to certain dimensions. Answer the questions to identify possible dimensions of the deck around the pool and hot tub.

Part I: The dimensions of the pool are to be 25 yards by 9 yards. The deck will be the same width on all sides of the pool. Including the deck, the total pool area has a length of (x + 25) yards, and a width of (x + 9) yards.
Write an equation representing the total area of the pool and the pool deck. Use y to represent the total area. Hint: The area of a rectangle is length times width. (1 point)








Rewrite the area equation in standard form. Hint: Use the FOIL method. (1 point)








Rewrite the equation from Part b in vertex form by completing the square. Hint: Move the constant to the other side, add to each side, rewrite the right side as a perfect square trinomial, and finally, isolate y. (4 points: 1 point for each step in the hint)








What is the vertex of the parabola? What are the x- and y-intercepts? Hint: Use your answer from Part a to identify the x-intercepts. Use your answer from Part b to identify the y-intercept. Use your answer from Part c to identify the vertex. (4 points: 1 point for each coordinate point)








Graph the parabola. Use the key features of the graph that you identified in Part d. (3 points)

In this problem, only positive values of x make sense. Why? (1 point)








What point on your graph shows a total area that includes the pool but not the pool deck? (1 point)








The community decided on a pool area that adds 6 yards of pool deck to both the length and the width of the pool. What is the total area of the pool and deck when x = 6 yards? (2 points)







Part II: A square hot tub will be placed in the center of an enclosed area near the pool. Each side of the hot tub measures 6 feet. It will be surrounded by x feet of deck on each side. The enclosed space is also square and has an area of 169 square feet. Find the width of the deck space around the hot tub, x.
Step 1: Write an equation for the area of the enclosed space in the form y = (side length)2. Hint: Don't forget to add x to each side of the hot tub. (1 point)







Step 2: Substitute the area of the enclosed space for y in your equation. (1 point)







Step 3: Solve your equation from Part b for x. (3 points)




Step 4: What is the width of the deck around the hot tub? Hint: One of the answers from Part c is not reasonable. (1 point)

Answers

Part I- a) y = (x + 25)(x + 9)

b) y = x^2 + 34x + 225

c) y=  (x + 17)^2 - 64

d) The y-intercept is (0, 225), The y-intercept is (0, 225).

e) The graph of the parabola has the vertex at (-17, -64), x-intercepts at (-25, 0) and (-9, 0), and the y-intercept at (0, 225).

f) Only positive values of x make sense because the dimensions of a pool and deck cannot be negative.

g) y = 465 square yards

Part II- a) y = (6 + 2x)^2

b) 169 = (6 + 2x)^2

c) x = 3.5 feet

Part I:

a) The equation representing the total area of the pool and the pool deck, using y to represent the total area, can be written as:

y = (x + 25)(x + 9)

b) To rewrite the equation in standard form using the FOIL method:

y = x^2 + 9x + 25x + 225

= x^2 + 34x + 225

c) To rewrite the equation in vertex form by completing the square:

y = (x^2 + 34x) + 225

= (x^2 + 34x + (34/2)^2) + 225 - (34/2)^2

= (x^2 + 34x + 289) + 225 - 289

= (x + 17)^2 - 64

d) The vertex of the parabola is (-17, -64). The x-intercepts are found by setting y = 0 and solving the equation:

0 = (x + 17)^2 - 64

64 = (x + 17)^2

x + 17 = ±√64

x + 17 = ±8

x = -17 ± 8

x = -25, -9

Therefore, the x-intercepts are (-25, 0) and (-9, 0).

The y-intercept is obtained by setting x = 0 in the equation:

y = (0 + 17)^2 - 64

y = 17^2 - 64

y = 289 - 64

y = 225

Therefore, the y-intercept is (0, 225).

e) The graph of the parabola has the vertex at (-17, -64), x-intercepts at (-25, 0) and (-9, 0), and the y-intercept at (0, 225).

f) Only positive values of x make sense because the dimensions of a pool and deck cannot be negative. In this context, negative values for x would not provide meaningful solutions for the width of the deck.

g) The point on the graph that represents the total area including the pool but not the pool deck is the y-intercept (0, 225).

h) When x = 6 yards, the total area of the pool and deck can be found by substituting the value into the equation from Part b:

y = (6 + 17)^2 - 64

y = 23^2 - 64

y = 529 - 64

y = 465 square yards

Part II:

a) The equation for the area of the enclosed space in the form y = (side length)^2, considering the hot tub and the deck around it, is:

y = (6 + 2x)^2

b) Substituting the area of the enclosed space (169 square feet) for y in the equation:

169 = (6 + 2x)^2

c) Solving the equation for x:

√169 = √((6 + 2x)^2)

13 = 6 + 2x

2x = 13 - 6

2x = 7

x = 7/2

x = 3.5 feet

Therefore, the width of the deck space around the hot tub is 3.5 feet.

for such more question on parabola

https://brainly.com/question/9201543

#SPJ8

When parallel lines are intersected by a transversal, which of the following angle pairs are supplementary?

Answers

Answer:

if two parallel lines are cut by a transversal,then, exterior angles on the same side of the transversal are supplementary!

Step-by-step explanation:

I don't really know how to explain it but I hope this helped!

Select the correct answer. What is the solution to this equation? 9^x - 1 = 2 O A. - 1/1/20 OB. 2 O C. OD. 1/1/20 1 23 Edmentum. All rights reserved. Reset Next​

Answers

Answer:

D. 1/2

Step-by-step explanation:

9^x - 1 = 2

9^x = 3

x = log{sub}9 (3)

x = 1/2 (9^(1/2)=3)

In ΔBCD,
B
D

BD
is extended through point D to point E,
m

C
D
E
=
(
9
x

12
)

m∠CDE=(9x−12)

,
m

B
C
D
=
(
2
x
+
3
)

m∠BCD=(2x+3)

, and
m

D
B
C
=
(
3
x
+
5
)

m∠DBC=(3x+5)

. Find
m

B
C
D
.
m∠BCD.

Answers

m∠BCD = 31.57° (approx). Hence, the answer of the angle is 31.57 degrees.

In the given diagram, BD is extended through point D to point E, m∠CDE = (9x - 12)°, m∠BCD = (2x + 3)°, and m∠DBC = (3x + 5)°. We need to find m∠BCD.

Use the Angle Sum Property of a Triangle.The Angle Sum Property of a Triangle states that the sum of all the angles in a triangle is equal to 180°.The angle sum of ΔBCD is:m∠BCD + m∠DBC + m∠CDE = 180°Substituting the given angles, we get:(2x + 3)° + (3x + 5)° + (9x - 12)° = 180°Simplifying the above expression, we get:14x - 4 = 180°14x = 180° + 4x = 184/14x = 92/7Find m∠BCD

       We know that m∠BCD = (2x + 3)°

       Substituting x = 92/7, we get:

       m∠BCD = (2 × 92/7 + 3)° = (184/7 + 3)° = 221/7°

       Therefore, m∠BCD = 31.57° (approx). Hence, the answer is 31.57.

For more such questions on angle, click on:

https://brainly.com/question/25770607

#SPJ8

Find the values of x and y.
G
(6y)⁰
X =
(5x)
y =
M
(10x)⁰
K
L

Answers

Answer:

be more clear of what u mean edit the question to explain more

Step-by-step explanation:

no explanation

Which expression is equivalent to 3(x+4)

Answers

If theres answer options, that would be useful. But an an example of an expression equivalent to 3(x+4) could be 3x+12 if we used distributive property.

The answer is:

3x + 12

Work/explanation:

To simplify this expression, we will use the distributive property:

[tex]\sf{3(x+4)}[/tex]

Distribute the 3:

[tex]\sf{3\cdot x + 3 \cdot 4}[/tex]

[tex]\sf{3x+12}[/tex]

Therefore, the answer is 3x + 12.

Determine the equation of the circle graphed below 100pts pls

Answers

Answer:

(x + 5)² + (y – 1)² = 25

Step-by-step explanation:

Note that the general equation of a circle is (x – h)² + (y – k)² = r², where (h, k) represents the location of the circle's center, and r represents the length of its radius.

The circle is 10 units in diamater, so the radius is half this: r=10/2=5.

The circle goes from -10 to 0 along the x-axis, so the x-coordinate of its centre is halfway between this: h=(-10+0)/2=-10/2=-5

The circle goes from -4 to 6 along the y-axis, so the y-coordinate of its centre is halfway between this: k=(-4+6)/2=-2/2=1

Now that we know r, h, and k, we can sub these into the general formula to get our equation:

(x - (-5))² + (y – 1)² = 5²

(x + 5)² + (y – 1)² = 25

How many solutions does this system of equations have?
-x+7
= -2x³ + 5x² + x - 2
O A.
0 в.
OC.
D.
no solution
1 solution
2 solutions
3 solutions
Reset
Next

Answers

The  system of equation: -x + 7 = -2x³ + 5x² + x - 2 has three solutions

The correct answer is option D.

To solve the system of equations:

-x + 7 = -2x³ + 5x² + x - 2

We need to simplify and rearrange the equation to find its solutions. Let's start by combining like terms:

-x + 7 = -2x³ + 5x² + x - 2

Simplifying the left side:

7 = -2x³ + 5x² - x - 2

Next, let's arrange the equation in descending order of the variable's exponent:

-2x³ + 5x² - x - 2 = 7

Now, let's move all terms to one side of the equation to set it equal to zero:

-2x³ + 5x² - x - 2 - 7 = 0

Simplifying further:

-2x³ + 5x² - x - 9 = 0

To determine the number of solutions, we can analyze the degree of the equation. Since it is a cubic equation, it can have a maximum of three real solutions.

The given system of equations is:

-x + 7 = -2x³ + 5x² + x - 2

To find the solutions, we need to set the equation equal to zero. Let's rearrange the terms:

2. -2x³ + 5x² - x - 9 = 0

Now, we can try to factor or use numerical methods to solve the equation. However, factoring a cubic equation can be complex and time-consuming. In this case, we'll use numerical methods to approximate the solutions.

One common numerical method is the Newton-Raphson method, which involves making an initial guess for the solutions and iterating to converge on a more accurate solution.

Using numerical software or calculators, we can find the approximate solutions of the equation as follows:

x ≈ -1.607, x ≈ 1.279, and x ≈ 3.328

For more such information on: system of equation:

https://brainly.com/question/13729904

#SPJ8

A charged particle produces an electric field with a magnitude of 2.0 N/C at a point that is 50 cm away from the particle. a) Without finding the charge of the particle, determine the electric field produced by this charge at a point 25 cm away from it. b) What will happen to the Electric field at the distance 50 cm, if you double the charge? c) What is the magnitude of the particle’s charge?

Answers

To solve these problems, we can use Coulomb's Law, which states that the magnitude of the electric field produced by a charged particle is directly proportional to the charge and inversely proportional to the square of the distance from the particle.

a) Without finding the charge of the particle, we can use the inverse square relationship. If the electric field magnitude is 2.0 N/C at a distance of 50 cm, then at half the distance (25 cm), the electric field would be four times stronger. Therefore, the electric field at 25 cm would be 4 * 2.0 N/C = 8.0 N/C.

b) Doubling the charge would result in doubling the electric field magnitude. So, if the electric field at a distance of 50 cm was initially 2.0 N/C, it would become 4.0 N/C after doubling the charge.

c) To determine the magnitude of the particle's charge, we need to use the equation for the electric field:

E = k * (|q| / r^2)

where E is the electric field magnitude, k is the electrostatic constant, |q| is the magnitude of the charge, and r is the distance from the particle.

Using the known values of E = 2.0 N/C and r = 50 cm (or 0.5 m), we can rearrange the equation to solve for |q|:

|q| = E * r^2 / k

Substituting the values and the known value of k, we can calculate the magnitude of the charge.

For more such questions on Coulomb's Law

https://brainly.com/question/28143917

#SPJ8

find the inverse of each function

Answers

Answer:

c

Step-by-step explanation:

assume base 10

-logy = x

[tex] \frac{1}{ log(y) } = x[/tex]

log base x y = 5 turns into the format x^ 5 = y

implement that to get c

Parker has 12 blue marbles. Richard has 34
of the number of blue marbles that Parker has.

Part A
Explain how you know that Parker has more blue marbles than Richard without completing the multiplication.
Enter equal to, greater than, or less than in each box.

Multiplying a whole number by a fraction
less than
1 results in a product that is
the original whole number.

Part B
How many blue marbles does Richard have? Enter your answer in the box.

blue marbles

Answers

Parker has 12 blue madbles Richard has 34 of the number of blue marbles that Parker has its 10
Other Questions
Describe in which circumstances problem-focused coping vsemotion-focused coping woulf be more effective. Write the formula for changing mAs to compensate for a change in source-image receptor distance (SID). Provide an overview of Japan's actions in East Asia and thePacific between 1914 and 1945 in 400-700 words. 1. Using micropython, write a function for a stepper motor that calculates the number of steps per minute; given that a certain angle is given as an argument. 2. Read data from Digital Accelerometer ADXL345 SPI using interrupts instead of polling. Problem 4. (10 points) Evaluate the line integral [(32y + 4y) ds, where C is the portion of the circle x + y = 4 that joins the point A = (2,0) to the point B = (-2, 2) counterclockwise An infinite length line conducts a current along the Y axis. The current is unknown but the magnetic field is known. The best Amperian path to use in order to find the current by applying Ampere's law is Select one: O a. A circle in the Z-Y plane Ob. A circle in the X-Y plane O c. None of these O d. A circle in the X-Z plane On the diagram on the back of this sheet, the contour interval is 5'. Label the elevation for ALL the contours, and circle the High and Low Points. 16) True/False: An Easement is a subset of property rights granted to an individual, group of people, and/or a company for a specific purpose. True False 17) True/False: A Legal Description is a written out description of a parcel of land that can include directions and distances, areas, and calls to physical objects. True False Since x is a number in the set {0, 1, . . . , 2^ t}, we can write x in binary as: x = b0 2 ^0 + b1 2^ 1 + b2 2 ^2 + + bt 2^ t , (1) where bi are bits. If b0 = 0, then x = b1 2 ^1 + b2 2 ^2 + + bt 2 ^t = 2y, for some integer y, i.e., x is an even number. On the other hand, if b0 = 1, then x = 1 + b1 2 ^1 + b2 2 ^2 + + bt 2 ^t = 2y + 1, for some integer y, i.e., x is an odd number. Let m = 2^(t 1) .(c) Show that if b0 = 0, then (g^ x )^ m 1 (mod p).(to do)(d) Show that if b0 = 1, then (g ^x ) ^m p 1 (mod p).(to do) Early summer, the which we just celebrated, much of Christianity celebrates Pentecost. For Christians, this feast remembers the outpouring of the Holy Spirit upon all people. Please see Acts 2. How does this celebration gives us an opportunity to experience rescue, redemption, and renewal for ourselves while communicating this to others? Not yet answered Marked out of 7.00 Given the following lossy EM wave E(x,t)=10e-0.14x cos(n107t - 0.1n10x) az A/m The attenuation a is: a. -0.14 (m) O b. -0.14x O c. 0.14 (m) O d. e-0.14x O e. none of these direct current, as shown in the figure, the average value of the magnetic field measured in the sides is 6.3G. What is the current in the wire? 80tu(t) For a unity feedback system with feedforward transfer function as G(s) = 60(s+34)(s+4)(s+8) s(s+6)(s+17) The type of system is: Find the steady-state error if the input is 80u(t): Find the steady-state error if the input is 80tu(t): Find the steady-state error if the input is 80tu(t): A rectangular channel 25m wide has a bed slope of 1: 1200 and ends in a free outfall. If the channel carries a flow rate of 20m/s, and has a Manning's roughness coefficient of 0.014, how far from the outlet is the depth equal to 99 % of normal depth. Use four equal depth steps in the calculations? How many acres are in a description reading, The NW of the SE and the S of the SW of the NE of Section 4? This section is from Week 4's Content Chapter 14: 1. Explain why paraphilias are seen far more commonly in men compared to women. 2. Analyze the differences between victimizing and non-victimizing paraphilic disorders, discuss each of the disorders that fall into each category, Prove the effective thickness equation. It does not make sense to talk about Human Beings as the cause ofenvironmental disasters, for disasters are nothing by cursesimposed on society by supernatural forces. To what extent does thisasser A set of class definitions and the console output is provided below. The main program is missing. A global function is also missing. Study the given code, console output and notes below. Then answer the question.class battery {public:double resistance = 0.01; //internal resistance valuedouble voltage = 12.0; //internal ideal source voltagedouble vbat = 0.0; //external battery terminal volatage initial valuedouble ibat = 0.0; //battery current initial value//Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() = 0;//Calculate and save ibat, assuming vbat is already knownvirtual void ibattery() = 0;};class unloadedbattery : public battery {public://Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() {vbat = voltage - (ibat * resistance);}//Calculate and save ibat, assuming vbat is already knownvirtual void ibattery() {ibat = (voltage - vbat) / resistance;}};class loadedbattery : public battery {public:double loadresistance;//Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() {vbat = voltage * (loadresistance / (loadresistance + resistance));}//Calculate and save ibat, given that load is already knownvirtual void ibattery() {ibat = voltage / (loadresistance + resistance);}};Console output:What is the current demand (in Amperes) for the unloadedbattery model? 1.5Battery power output will be 17.9775 WattsWhat is the load resistance (in Ohms) for the loadedbattery model? 5.0Battery power output will be 28.6851 WattsNotes:a.Name the application QuestionTwo. The source file will be QuestionTwo.cpp.b.The main program will create an "unloadedbattery" object, ask the user for current demand (ibat), and calculate vbat using the appropriate method.c.It must then use a global function to calculate battery power output, which is vbat*ibat. However, main does not pass vbat and ibat to the function. Rather, main must only pass the unloadedbattery object to the function.d.Then main will create a "loadedbattery" object and ask the user for the load resistance. Then the methods can be used to calculate vbat and ibat.e.Once more, main must use the same global function to calculate battery power output and main must only pass the loadedbattery object to the function.f.The global function takes a single argument (either loadedbattery or unloadedbattery object) and it returns the power as a double. It does not print to the console. Consider the following method for solving the ODE y = f(y,t) y = yn + f(yu,ta) (2) Yu+1 = y +hlaf (y..tu+1) + (1 - a) f(...)) where 0 Sasi (a) Apply this method to y = iwy, where w is a real number, and find the optimal value of a for stability. What is the largest time step you can take with this optimal value of a? (b) With the value of a obtained in part (a), we solve the system y' = iwy with y(0) = 1 and step size h=1/w. What are the amplitude and phase error after 100 stepx? (c) Now find the value of a that gives you maximum possible accuracy (d) For the value of a obtained in part (e), what are the stability characteristics of the method when applied to the ODE / www real) A laser emits radiations with a wavelength of =470 nm. How many photons are emitted per second if the laser has a power of 1.5 mW?