The half-cell that houses the cathode is Half-cell B. The voltage of the cell is approximately 0.0297 V.
In a concentration cell, the cathode is the half-cell with the higher concentration of electrolyte. In this case, half-cell B has a higher concentration (0.87 M) compared to half-cell A (0.13 M).
Cathode: Half-cell B
To calculate the voltage of the cell, we can use the Nernst equation:
E_cell = E° - (RT/nF) * ln(Q)
For a Sn/Sn²⁺ concentration cell, the standard cell potential E° = 0 V, as both half-cells have the same redox reaction. The reaction quotient Q = [Sn²⁺ (A)] / [Sn²⁺ (B)].
Substituting the values and considering room temperature (25°C or 298.15 K), we get:
E_cell = 0 - ((8.314 J/mol·K * 298.15 K) / (2 * 96485 C/mol) * ln(0.13 M / 0.87 M)
E_cell ≈ 0.0297 V
Voltage of cell: 0.0297 V
Learn more about cathode here: https://brainly.com/question/30699531
#SPJ11
PLEASE HELP!!
Consider the equations below
H2>2H
The rest of the questions on the image
The total equation is C2H4 + C2H5 + H2 → C2H5 + C2H6 when these equations are combined together.
How are two chemical equations added?By placing all of the reactants on the left side of the equation and all of the products on the right side, you can integrate numerous reactions into a single equation. Chemical species that are present on both sides of the equation will be eliminated without change if the overall equation is simplified.
What are some instances of chemical reactions involving addition?Only chemical compounds with numerous bonds—such as molecules with carbon-carbon double bonds (alkenes), carbon-carbon triple bonds (alkynes), or molecules with carbonyl (C=O) groups—can conduct addition reactions. Consider the formula CH2=CH2 + Cl2 CH2Cl → CH2Cl.
To learn more about chemical equation visit:
brainly.com/question/30087623
#SPJ1
a particular atom has a charge of -3.2 x 10^-19 c. how many electrons has it gained or lost as compared to its neutral state? remember that the charge on each electron is -1.6 x 10^-19 c.
the atom gained 2 electrons to become negatively charged.
The neutral state of an atom is the state in which the atom has an equal number of protons and electrons. Protons are positively charged particles found in the nucleus of an atom, while electrons are negatively charged particles that orbit the nucleus in shells or energy levels.
In a neutral atom, the number of positive charges (protons) is equal to the number of negative charges (electrons), resulting in a net charge of zero. This means that the atom is neither positively nor negatively charged.
Most elements in their natural state are neutral, and they only gain or lose electrons to become ions when they interact with other atoms or molecules.
If an atom has a charge of -3.2 x [tex]10^{-19} C[/tex], then it has gained 2 electrons compared to its neutral state.
This is because the charge on each electron is -1.6 x [tex]10^{-19} C[/tex], so dividing the overall charge by the charge on each electron gives:
-3.2 x [tex]10^{-19}[/tex] C / (-1.6 x [tex]10^{-19}[/tex] C/electron) = 2 electrons gained
Therefore, the atom gained 2 electrons to become negatively charged.
To know more about atom go through:-
https://brainly.com/question/17545314
#SPJ4
when an acid reacts with a metal like al, the products are . group of answer choices water and a salt water and a base a salt and carbon dioxide a salt and hydrogen water and carbon dioxide
When an acid reacts with a metal like Al (aluminum), the products formed are a salt and hydrogen gas.
The reaction can be represented by the following chemical equation:
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
In this equation, HCl represents hydrochloric acid, Al represents aluminum, AlCl3 represents aluminum chloride, and H2 represents hydrogen gas.
The reaction between an acid and a metal produces salt and hydrogen gas, but not water and salt, water and a base, a salt and carbon dioxide, or water and carbon dioxide.
For more such questions on Acid reactions
https://brainly.com/question/15334816
#SPJ11
a salt bridge . a. is made up of an aqueous ionic compound b. has positive ions that are attracted to the cathode c. has negative ions that are attracted to the anode d. allows the reaction of the galvanic cell to continue e. all of the above
The correct answer is: "e. all of the above." A salt bridge is an essential component of a galvanic cell. It is made up of an aqueous ionic compound that allows the reaction of the galvanic cell to continue.
The salt bridge contains positive ions that are attracted to the cathode and negative ions that are attracted to the anode.
By allowing ions to flow between the two half-cells of the galvanic cell, the salt bridge prevents the buildup of charge that could halt the reaction.
This ensures that the cell can continue to produce electrical energy until the reactants are fully consumed.
To know more about salt bridge, refer here:
https://brainly.com/question/2861410#
#SPJ11
100 points
What is a limitation of the Arrhenius model of acids and bases?
All bases produce hydroxide ions when dissolved in water.
All bases and acids form water and hydroxide ions when dissolved.
All acids donate hydrogen ions to bases that accept hydrogen ions.
All acids and bases form conjugates when dissolved in water.
The Arrhenius model of acids and bases is limited in that it only considers substances that produce hydrogen ions (acids) or hydroxide ions (bases) when dissolved in water. This model does not account for the behavior of substances that do not produce these ions when dissolved in water, such as ammonia (NH3) or hydrogen fluoride (HF).
Therefore, the limitation of the Arrhenius model is that it cannot explain the basicity of ammonia or the acidity of hydrogen fluoride, which do not produce hydroxide or hydrogen ions, respectively, when dissolved in water.
So, the correct option is:
B).All bases and acids form water and hydroxide ions when dissolved.correct option is not listed
A limitation of the Arrhenius model of acids and bases is that it only considers substances that produce hydrogen or hydroxide ions in aqueous solutions as acids or bases, respectively¹. The Arrhenius theory is limited in that it can only describe acid-base chemistry in aqueous solutions. Similar reactions can also occur in non-aqueous solvents, however, as well as between molecules in the gas phase³. Arrhenius could not explain why certain compounds do not contain hydroxide ions, despite displaying basic properties. For example, metal oxides and metal carbonates².
which of the following occurs when an ionic compound dissolves in a polar solvent such as water? select all that apply: the water molecules chemically react with the ions. the disorder of the ionic salt is decreased. the water molecules attract both the anions and cations in the ionic salt. the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions.
When an ionic compound dissolves in a polar solvent such as water the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions. This statement (d) is correct.
When an ionic compound is dissolved in a polar solvent like water, the ions are dissociated due to the solvation of the ionic compound. As a result, the ions become hydrated and the hydration of ions occurs by the attraction of ions to water molecules.
In general, ionic compounds dissolve in polar solvents such as water, where the water molecules surround the ions of the ionic compound. As a result, the solvation process occurs and the ions become hydrated.
The hydration process reduces the electrostatic attraction between the ions of the ionic compound, resulting in the dissociation of the ions. In summary, when an ionic compound dissolves in a polar solvent such as water, the ions become solvated by water molecules, which reduces the electrostatic attractions between the ions.
Learn more about ionic compounds here:
brainly.com/question/30420333
#SPJ11
Would water, lead, air or glass allow sound to travel the fastest? Explain why, using scientific terminology
Answer:
water would allow sound to travel the fastest due to its higher density and elasticity compared to air, which makes it a better medium for transmitting sound waves.
Explanation: Answer is in explanation
Sound travels fastest in solids, and specifically in materials that are elastic, dense, and have strong intermolecular forces between their particles. Among the options given, glass is a solid, but it is not very elastic or dense, so it is not the best material for sound to travel through quickly. Lead is a dense material, but it is also very heavy and not very elastic, so it is not the best either.
Air is a gas, and gases are not very dense or elastic, so sound travels relatively slowly through them. The speed of sound in air is about 343 meters per second at standard temperature and pressure.
Water is a liquid, but it is much denser and more elastic than air, so sound travels about four times faster in water than in air, at around 1,484 meters per second.
Therefore, among the given options, water would allow sound to travel the fastest due to its higher density and elasticity compared to air, which makes it a better medium for transmitting sound waves.
are the bonds in each of the following substances ionic, nonpolar covalent, or polar covalent? select the single best answer for each substance.
The bonds in each of the following substances are Ionic bond ,Polar covalent bond , Nonpolar covalent bond.
NaCl: Ionic bond. In this substance, sodium (Na) loses one electron to form a positively charged ion (Na+), while chlorine (Cl) gains one electron to form a negatively charged ion (Cl-). The oppositely charged ions attract each other, forming an ionic bond.
[tex]H_{2} O[/tex]: Polar covalent bond. Oxygen (O) is more electronegative than hydrogen (H), meaning it has a greater ability to attract electrons. As a result, the electrons are shared unevenly between O and H, creating a partial negative charge on O and a partial positive charge on H.
[tex]CH_{4}[/tex]: Nonpolar covalent bond. Carbon (C) and hydrogen (H) have similar electronegativities, so the electrons are shared evenly between the atoms. This results in a nonpolar covalent bond, where there is no significant charge separation.
Know more about bonds here :
brainly.com/question/26712131
#SPJ11
An ion has 19 protons, 20
neutrons, and 18 electrons. What
is the correct isotope notation?
A. 39K+1
19
B. 39Ca-¹
19
D. 19 Ca+¹
39
C. 18K+1
Enter the answer choice letter.
Enter
The isotopic representation for a potassium ion which has 19 protons, 20 neutrons, and 18 electrons is shown as ³⁹₁₉K⁺¹. Option A is the correct answer according to the question.
What is an isotope?An isotope is a variant of an element that has the same number of protons in the nucleus but a different number of neutrons. This means that isotopes of the same element have the same atomic number (number of protons) but different atomic masses (sum of protons and neutrons).
Isotopes can be either stable or unstable (radioactive), and the number of neutrons in an isotope affects its stability and other properties, such as its nuclear binding energy and decay rate. Many isotopes are used in scientific research, medicine, and industry, including in radiometric dating, nuclear energy, and medical imaging.
The potassium in the question given has a positive charge and thus has lost one electron. Therefore the proton is one number higher than the electrons. Neutral potassium has 19 electrons and ionic form has 18.
Learn more about isotopes here:
https://brainly.com/question/27475737
#SPJ1
kingsley then adds 47.17 ml of naoh to 250.00 ml of the hcooh solution. the neutralization reaction resulted in 0.09 moles of hcooh and 0.026 moles of hcoo- left in solution. determine the ph of the resulting solution.
The pH of the resulting solution is approximately 2.46.
To determine the pH of the resulting solution after Kingsley adds 47.17 mL of NaOH to 250.00 mL of the HCOOH solution, and the neutralization reaction results in 0.09 moles of HCOOH and 0.026 moles of HCOO- left in solution, follow these steps:
1. Calculate the concentrations of HCOOH and HCOO- in the solution by dividing their moles by the total volume of the solution (in liters). The total volume is the sum of the initial HCOOH solution (250 mL) and the added NaOH (47.17 mL), which equals 297.17 mL or 0.29717 L.
- [HCOOH] = 0.09 moles / 0.29717 L = 0.303 M
- [HCOO-] = 0.026 moles / 0.29717 L = 0.087 M
2. Use the Henderson-Hasselbalch equation to calculate the pH:
- pH = pKa + log ([HCOO-] / [HCOOH])
- The pKa value for HCOOH (formic acid) is approximately 3.75.
- pH = 3.75 + log (0.087 / 0.303) = 3.75 - 1.29 = 2.46
You can learn more about neutralization reactions at: brainly.com/question/28970253
#SPJ11
we get x = 0.000882 MTherefore, the pH of the solution will be:`pH = -log[H+]``pH = -log(0.000882) = 3.055`Therefore, the pH of the resulting solution is 3.055.
Determine the pH of the resulting solution?
To determine the pH of the resulting solution, first, we need to calculate the concentration of HCOO- and HCOOH using the number of moles and volume of the solution given. Then, we can use the dissociation constant of HCOOH to calculate the concentration of H+ ions and thus the pH of the solution. Let's solve it step by step.Volume of HCOOH solution = 250.00 mlVolume of NaOH solution = 47.17 mlNumber of moles of HCOOH = 0.09 molesNumber of moles of HCOO- = 0.026 molesLet's calculate the molar concentration of HCOOH and HCOO-.
Molar concentration of HCOOH= 0.09 mol/0.250 L = 0.36 MMolar concentration of HCOO-= 0.026 mol/0.250 L = 0.104 M Now, let's calculate the concentration of H+ ions using the dissociation constant of HCOOH.`HCOOH ⇌ H+ + HCOO-``Ka = [H+][HCOO-]/[HCOOH]`Let x be the concentration of H+ ions. Then, the concentration of HCOO- ions will be x and the concentration of HCOOH ions will be 0.36 - x. Now, substituting the values in the above equation, we get:`1.8 × 10 ⁻⁴ = x(0.104)/(0.36 - x)`Solving the above equation.
Learn more about Determine the pH of the resulting solution?
brainly.com/question/30737303
#SPJ11
which of the following gives the definition of ion-dipole attraction? select the correct answer below: ion-dipole attraction is attraction between an ion and the polar bond(s) in a nonpolar molecule. ion-dipole attraction is a physical process accompanying the dissolution of an ionic compound in which the compound's constituent ions are solvated and dispersed throughout the solution. ion-dipole attraction is the scattering of visible light by a solution. ion-dipole attraction is the electrostatic attraction between an ion and a polar molecule.
Ion-dipole attraction is the electrostatic attraction between an ion and a polar molecule. The correct answer is d.
Ion-dipole attraction is an intermolecular force that arises from the electrostatic attraction between an ion and a polar molecule. The ion is attracted to the partial charges on the polar molecule due to the separation of positive and negative charges within the molecule. This attraction is important in a variety of chemical processes, including dissolution of ionic compounds in solvents, such as water, where the solvent molecules surround and solvate the ions.
Ion-dipole interactions also play a significant role in many biological processes, such as protein folding and enzyme catalysis, as well as in industrial processes, such as separating ions in solution through methods like ion-exchange chromatography. Hence, the correct answer is d.
To know more about ion-dipole interaction, here
brainly.com/question/29658665
#SPJ4
what is the ph of a solution where the ratio of the acidic form of serine to the basic form of serine is 60.0?
The ratio of the acidic form of serine to the basic form of serine can be expressed using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
where pKa is the dissociation constant of serine (which is around 2.2), [A-] is the concentration of the basic form of serine, and [HA] is the concentration of the acidic form of serine.
Assuming that the total concentration of serine is 1.0 (i.e., [A-] + [HA] = 1.0), we can set up the following equation:
60 = [A-]/[HA]
or
[A-] = 60[HA]
Substituting this expression for [A-] into the Henderson-Hasselbalch equation, we get:
pH = 2.2 + log(60[HA]/[HA]) = 2.2 + log(60) = 4.8
Therefore, the pH of the solution where the ratio of the acidic form of serine to the basic form of serine is 60.0 is approximately 4.8.
To know more about Henderson-Hasselbalch equation, visit the link given below:
https://brainly.com/question/13423434
#SPJ4
use dimensional analysis and solve for: how many grams of Argon (Ar) are present in 2.35 x 1024 atoms of argon?
We can use dimensional analysis to solve this problem. First, we need to find the molar mass of argon from the periodic table, which is approximately 39.95 g/mol.
Next, we can set up a conversion factor using Avogadro's number, which is 6.022 x 10^23 atoms/mol.
1 mol Ar = 6.022 x 10^23 atoms Ar
From this conversion factor, we can derive another conversion factor:
1 atom Ar = 1 mol Ar/6.022 x 10^23 atoms Ar
Now we can use these conversion factors to convert atoms of argon to grams of argon:
2.35 x 10^24 atoms Ar * (1 mol Ar/6.022 x 10^23 atoms Ar) * (39.95 g Ar/1 mol Ar)
= 9.39 x 10^2 g Ar
Therefore, there are approximately 939 grams of argon present in 2.35 x 10^24 atoms of argon.
calculate the maximum mass of the sodium soap that can be prepared from 195 g of glyceryl trimyristate.
We must ascertain the molar mass of glyceryl trimyristate and the stoichiometric ratio of the reactants and products in the saponification reaction in order to calculate the maximum mass of sodium soap that may be produced from 195 g of glyceryl trimyristate.
The saponification of glyceryl trimyristate with sodium hydroxide (NaOH) produces three molecules of sodium soap and one molecule of glycerol:
Glyceryl trimyristate + 3 NaOH → 3 sodium soap + glycerol
The molar mass of glyceryl trimyristate is calculated as:
3 (myristic acid molar mass) + (glycerol molar mass) = 3 (228.39 g/mol) + 92.09 g/mol = 913.26 g/mol
The stoichiometric ratio of the reactants and products is 1:3, which means that for every one mole of glyceryl trimyristate, three moles of sodium soap are produced.
To calculate the maximum mass of sodium soap that can be prepared, we need to convert the given mass of glyceryl trimyristate to moles using its molar mass and then use the stoichiometric ratio to determine the maximum mass of sodium soap that can be produced:
Number of moles of glyceryl trimyristate = 195 g / 913.26 g/mol = 0.214 moles
Number of moles of sodium soap produced = 3 × 0.214 moles = 0.642 moles
Mass of sodium soap produced = number of moles × molar mass of sodium soap = 0.642 moles × 278.38 g/mol = 178.46 g
Therefore the correct answer is the maximum mass of the sodium soap that can be prepared from 195 g of glyceryl trimyristate is 178.46 g.
For more questions on: trimyristate
https://brainly.com/question/14673025
#SPJ11
a farmer notices that the nitrates (no3) from his fertilizer are disappearing rapidly from his soil. this could be due to:
The farmer noticed that the nitrates (NO3) from his fertilizer are disappearing rapidly from his soil. This could be due to several reasons, including: Leaching, Denitrification, Plant Uptake.
Leaching: This is the process whereby nitrates are washed away from the soil by rainfall or irrigation. When there is heavy rainfall or excessive watering, nitrates can be washed away from the topsoil, leaving the plants without the required nutrients.
Denitrification: This is a process whereby bacteria in the soil break down nitrates into nitrogen gas, which is released into the atmosphere. This process can occur in poorly drained soil, which is waterlogged and lacks sufficient oxygen to support plant growth.
Plant Uptake: Nitrogen is a vital nutrient for plant growth, and plants require it to develop leaves, stems, and roots. When plants absorb the nitrogen from the soil, the nitrates in the soil reduce significantly.In conclusion, several factors could lead to the rapid disappearance of nitrates from the soil. The farmer needs to understand the primary cause of the problem to address it effectively. Leaching, denitrification, and plant uptake are some of the reasons the nitrates could be disappearing rapidly from the soil.
for more such question on fertilizer
https://brainly.com/question/24782241
#SPJ11
tetracyanoethylene has the skeleton shown below: from its lewis structure determine the following: reference: ref 5-2 how many of the atoms are sp 2 hybridized?
All 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Option 1 is correct.
In the Lewis structure of tetracyanoethylene, there are a total of 12 carbon atoms, 4 nitrogen atoms, and 6 double bonds. Each carbon atom has a double bond with a neighboring carbon atom and a triple bond with a neighboring nitrogen atom, while each nitrogen atom has a triple bond with a neighboring carbon atom.
To determine how many of the atoms are sp² hybridized, we can look at the electronic geometry around each atom in the molecule. The carbon atoms in tetracyanoethylene have a trigonal planar geometry, which corresponds to sp² hybridization, due to the three atoms bonded to each carbon atom lying in the same plane.
Therefore, all 12 carbon atoms in tetracyanoethylene are sp² hybridized. In summary, all 12 carbon atoms in tetracyanoethylene are sp² hybridized due to the trigonal planar geometry around each carbon atom. Hence Option 1 is correct.
The complete question is:
Tetracyanoethylene has the skeleton shown below: from its Lewis structure determine the following: Reference: Ref 5-2 (The image attached). How many of the atoms are sp² hybridized?
12141610To know more about the Lewis structure, here
https://brainly.com/question/30247091
#SPJ4
Under a pressure of 862 kPa, a gas has a volume of 752 cm^3. The pressure is increased, without changing the temperature, until the volume is 624 cm^3. What is the new pressure?
Boyle's Law states that a gas's pressure and volume are inversely related at a given temperature. Therefore, P1V1 = P2V2. The new pressure is 1037.05 kPa as a result.
What is the pressure of a gas with a 725 ml volume?The pressure of a gas with a volume of 725 mL and a pressure of 0.970 atm is allowed to increase while maintaining a constant temperature.
To determine the new pressure, we can plug in the indicated values:
P1 = 862 kPa, V1 = 752 cm³, V2 = 624 cm³
P1V1 = P2V2
862 kPa x 752 cm³ = P2 x 624 cm³
647024 = 624P2
P2 = 647024/624
P2 = 1037.05 kPa
To know more about Boyle's Law visit:-
https://brainly.com/question/30367133
#SPJ1
The compound nickel(II) sulfate is a strong electrolyte. Write the reaction when solid nickel(II) sulfate is put into water.
Include states of matter.
When solid nickel(II) sulfate (NiSO4) is put into water, it dissociates completely into its constituent ions. The chemical equation for this process can be written as:
NiSO4(s) → Ni2+(aq) + SO42-(aq)
In this equation, (s) represents the solid state, while (aq) represents the aqueous state, which indicates that the ions are dissolved in water.
Nickel(II) sulfate is a soluble salt that dissociates readily in water, meaning that it is a strong electrolyte. This property allows it to conduct electricity when dissolved in water and is often used in various industrial and laboratory applications, including electroplating, catalysts, and batteries.
To know more about strong electrolyte, visit:
https://brainly.com/question/29771118
#SPJ1
an ionic compound is prepared according to the following unbalanced chemical equation. a -g sample of contains molecules. the compound consists of by mass. what are the identities of m and x, and what is the correct name for ? starting with g each of m and , what mass of can be prepared?
Correct name is, M: Al X: Cl. The correct name for MX3 is aluminum trichloride. Starting with 1.00 g each of Al and Cl2, the maximum mass of AlCl3 that can be prepared is 2.41 g.
Use Avogadro's number to convert the number of molecules to moles:
9.26 x 10^20 molecules X × (1 mol X / 6.022 x 10^23 molecules X) = 0.0154 mol X
Since the compound MX3 has three X atoms for every M atom, we know that the number of moles of M in the sample is:
0.0154 mol X / 3 = 0.00513 mol M
Next, we can use the mass percent of X in MX3 to find the mass of X in the compound. If we assume a 100 g sample of MX3, then the mass of X in the sample would be:
60.40 g X / 100 g MX3 × 100 g = 60.40 g X
We can convert this mass to moles using the molar mass of X:
60.40 g X × (1 mol X / 39.95 g X) = 1.51 mol X
Since there are three X atoms in each molecule of MX3, we know that the total number of moles of X in 1.00 g of X2 is:
1.00 g X2 × (1 mol X2 / 31.84 g X2) × 2 mol X / 1 mol X2 = 0.0627 mol X
Similarly, the number of moles of M in 1.00 g of M is:
1.00 g M × (1 mol M / 26.98 g M) = 0.0371 mol M
The limiting reactant in the reaction to form MX3 will be the element that produces the smaller amount of product, which in this case is M. Therefore, the maximum mass of MX3 that can be prepared using 1.00 g of M and 1.00 g of X2 is:
0.0371 mol M × (1 mol MX3 / 1 mol M) × (123.32 g MX3 / 1 mol MX3) = 4.57 g MX3
To know more about compound, here
brainly.com/question/14522285
#SPJ4
--The complete question is, An ionic compound MX3 is prepared according to the following unbalanced chemical equation. M+XMX3 A 0.109-g sample of X, contains 9.26 x 1020 molecules.
The compound MX; consists of 60.40% X by mass. What are the identities of M and X? (Express your answer as a chemical symbol.)
M: X: What is the correct name for MX3?
Starting with 1.00 g each of M and of X2, what mass of MX, can be prepared?--
if two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b. container a will have:
If two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b, container a will have a greater pressure.
Pressure is defined as force per unit area, and it is the perpendicular force exerted by a gas per unit area of the container's surface. The temperature of a gas is directly proportional to the average speed of its particles because they have more kinetic energy when they are warmer. When the temperature of the gas is raised, its particles gain more kinetic energy, and the gas's average velocity rises.Pressure is affected by temperature because the kinetic energy of gas molecules affects how often they collide with one another and with the container walls.
As a result, if two separate chambers, a and b, have the same volume and contain the same number of moles, but container a is held at a higher temperature than b, container a will have a greater pressure.
For more such questions on Pressure
https://brainly.com/question/3328692
#SPJ11
what is the ph of a buffer solution that is 0.211 m in hypochlorous acid (hclo) and 0.111 m in sodium hypochlorite? the ka of hypochlorous acid is 3.8
The pH of the solution calculated is 7.14. This is calculated using the Henderson-Hassel Bach equation.
A buffer solution is defined as a solution which can resist the pH change when the addition of an acidic or basic components to the solution. Buffer solution is able to neutralizing the small amounts of added acid or base to the solution by maintaining the pH of the solution relatively stable. This solution is formed by a weak acid that is hypochlorous acid and its conjugate base that is hypochlorite which is coming from sodium hypochlorite.
To calculate the pH of the solution we can use the Henderson-Hassel Bach equation.
pH = pKa + Log [base]/[acid]
pH = - Log 3.8 × 10⁻⁸ + log 0.111 / 0.211
pH = 7.14
To learn more about Henderson-Hassel Bach equation.
https://brainly.com/question/29735541
#SPJ4
Which phrase describes a situation in which all the forces are balanced
Answer:
The phrase that describes a situation in which all the forces are balanced is "equilibrium"
a sample of nitrogen gas expands in volume from 1.4 to 5.3 l at constant temperature. calculate the work done in joules if the gas expands
The work done by the gas during the expansion is 496 J.
Assuming that the nitrogen gas behaves ideally, the work done during the expansion can be calculated using the following equation:
W = -PΔV
where W is the work done, P is the pressure of the gas, and ΔV is the change in volume of the gas. Since the temperature is constant, the pressure of the gas can be assumed to be constant as well. Therefore, we can simplify the equation to:
W = -P(Vf - Vi)
where Vi is the initial volume of the gas and Vf is the final volume of the gas.
Substituting the given values, we get:
W = -(1 atm) (5.3 L - 1.4 L) = -4.9 L atm
To convert L atm to joules, we need to use the conversion factor 101.3 J/L atm:
W = -4.9 L atm × 101.3 J/L atm = -496 J
Since the work done is negative, this means that the gas is doing work on its surroundings, which is consistent with the fact that the gas is expanding.
Find out more about work done
brainly.com/question/9252627
#SPJ4
Match them for me please!
Change in shape is physical change. Transformation of one substance to another is Chemical change. Evidence of a chemical change is precipitation.
What is precipitation ?Precipitation in an aqueous solution is the process of converting a dissolved material into an insoluble solid from a supersaturated solution. The precipitate is the substance that forms. In the instance of an inorganic chemical reaction that results in precipitation, the chemical reagent that causes the solid to form is referred to as the precipitant.
The transparent liquid that remains above the precipitated or centrifuged solid phase is also known as the "supernate" or "supernatant."
When solid impurities segregate from a solid phase, the concept of precipitation can be expanded to other areas of chemistry (organic chemistry and biochemistry) and even applied to solid phases (e.g., metallurgy and alloys).
To know more about precipitation , visit;
https://brainly.com/question/29762381
#SPJ1
Need help on question 16
Answer: HF
If a hydrogen is bonded to an oxygen, fluorine, or nitrogen atom, it will form a hydrogen bond. Due to an unequal sharing of electrons, there is a significant dipole moment where the hydrogen atom is positive and the flourine/oxygen/nitrogen is negative.
how many atoms is in Ni(C2H3O2)4
Answer:
there are 37 atoms
Explanation:
The formula for nickel(II) acetate tetrahydrate is Ni(C2H3O2)4. To calculate the number of atoms in the formula, we need to count the number of atoms of each element and then multiply each by the number of times it appears in the formula.
Ni: There is 1 Ni atom in the formula.
C: There are 8 C atoms (4 from each C2H3O2) in the formula.
H: There are 12 H atoms (3 from each C2H3O2) in the formula.
O: There are 16 O atoms (4 from each C2H3O2) in the formula.
Therefore, the total number of atoms in the formula is 1 + 8 + 12 + 16 = 37.
So there are 37 atoms in Ni(C2H3O2)4.
if a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid? remember to use correct significant figures in your answer (round your answer to the nearest tenth).
If a solution originally 0.532 m in acid ha is found to have a hydronium concentration of 0.112 m at equilibrium, what is the percent ionization of the acid is 21.1%.
When an atom, molecule, or other material loses or acquires one or more electrons, the process is known as ionization, which produces charged particles known as ions. Chemical reactions, exposure to ionizing radiation, or other physical processes can all result in this process. Ionization is the process by which an acid molecule contributes a proton (H+) to a water molecule, resulting in the formation of a hydronium ion (H3O+).
The percent ionization of an acid can be calculated using the following formula:
% ionization = [H3O+]eq / [HA]initial × 100%
where [H3O+]eq is the hydronium ion concentration at equilibrium and [HA]initial is the initial concentration of the acid.
In this case, the initial concentration of the acid is 0.532 M, and the hydronium ion concentration at equilibrium is 0.112 M.
Therefore,
% ionization = 0.112 / 0.532 × 100%
= 21.1%
Therefore, the percent ionization of the acid is 21.1% (rounded to the nearest tenth).
To learn more about ionization, refer to:
https://brainly.com/question/1445179
#SPJ4
what is the difference between endothermic and exothermic process in chemistry
Answer:)
In simple terms, the endothermic reactions
absorb energy from the surrounding that is
in the form of heat. On the other hand, an
exothermic reaction releases energy into the
surrounding of the system.
What is the Molarity of a 6.3 L dilution of a 0.99Molar solution 3.4 L
Answer:
To solve this problem, we can use the dilution formula: M1V1 = M2V2 Where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume. We are given that the initial molarity is 0.99M and the initial volume is 3.4 L. We can use this information to find M2: M1V1 = M2V2 (0.99M)(3.4 L) = M2(6.3 L) M2 = (0.99M)(3.4 L) / (6.3 L) M2 = 0.5357 M Therefore, the molarity of a 6.3 L dilution of a 0.99M solution with an initial volume of
Answer:
0.534 M.
Explanation:
Molarity is a measure of the concentration of a solution, defined as the number of moles of solute per liter of solution. When a solution is diluted by adding more solvent, the number of moles of solute remains the same, but the volume of the solution increases, resulting in lower molarity.
In this case, you have a 3.4 L solution with a molarity of 0.99 M. This means that the number of moles of solute in this solution is 3.4 L * 0.99 mol/L = 3.366 moles.
If you dilute this solution to a final volume of 6.3 L by adding more solvent, the number of moles of solute remains the same (3.366 moles), but the volume has increased to 6.3 L. So the molarity of the diluted solution is 3.366 moles / 6.3 L = 0.534 M.
a lithium atom contains 3 electrons, whereas a fluorine atom contains 9 electrons. which correctly describes the formation of a bond between lithium and fluorine atoms?
When a bond is formed between a lithium atom and a fluorine atom, the electrons are transferred from the lithium atom to the fluorine atom to form an ionic bond.
Lithium has one valence electron in its outermost shell, while fluorine has seven valence electrons in its outermost shell. Lithium can lose its valence electron to achieve a stable configuration similar to that of the noble gas helium, which has a full outermost shell with two electrons.
On the other hand, fluorine can gain one electron to achieve a stable configuration similar to that of the noble gas neon, which has a full outermost shell with eight electrons.
Thus, when a bond is formed between a lithium atom and a fluorine atom, the lithium atom loses its one valence electron to become a positively charged ion ([tex]Li^+[/tex]), while the fluorine atom gains one electron to become a negatively charged ion ([tex]F^-[/tex]).
The opposite charges of these ions attract each other, resulting in the formation of an ionic bond between them. The resulting compound is lithium fluoride (LiF), a solid with high melting and boiling points due to the strong electrostatic forces between the positively charged lithium ions and negatively charged fluoride ions.
For more question on ionic bond click on
https://brainly.com/question/13526463
#SPJ11