The absolute values of the three least angles at which the light is completely cancelled are approximately 0.106 radians, 0.213 radians, and 0.320 radians, respectively.
To find the angles at which the light is completely cancelled (resulting in dark fringes), we can use the concept of diffraction and the equation for the position of dark fringes in a single slit diffraction pattern.
The equation for the position of dark fringes in a single slit diffraction pattern is given by:
sin(θ) = mλ / b
where θ is the angle of the dark fringe, m is the order of the fringe (m = 0 for the central fringe), λ is the wavelength of the light, and b is the width of the slit.
In this case, the wavelength of the laser light is given as 632.8 nm, which is equal to 632.8 × [tex]10^{-9}[/tex] m, and the width of the slit is 3.75 × 10^(-3) mm, which is equal to 3.75 × [tex]10^{-6}[/tex] m.
For the first-order dark fringe (m = 1), we can calculate the angle θ_1:
sin(θ_1) = (1)(632.8 × [tex]10^{-9}[/tex] m) / (3.75 × [tex]10^{-6}[/tex] m)
Using a calculator, we find θ_1 ≈ 0.106 radians.
For the second-order dark fringe (m = 2), we can calculate the angle θ_2:
sin(θ_2) = (2)(632.8 × [tex]10^{-9}[/tex] m) / (3.75 × [tex]10^{-6}[/tex] m)
Again, using a calculator, we find θ_2 ≈ 0.213 radians.
For the third-order dark fringe (m = 3), we can calculate the angle θ_3:
sin(θ_3) = (3)(632.8 × [tex]10^{-9}[/tex] m) / (3.75 × [tex]10^{-6}[/tex] m)
Once again, using a calculator, we find θ_3 ≈ 0.320 radians.
Therefore, the absolute values of the three least angles at which the light is completely cancelled are approximately 0.106 radians, 0.213 radians, and 0.320 radians, respectively.
Learn more about diffraction here:
https://brainly.com/question/12290582
#SPJ11
A man drags a 220 kg sled across the icy tundra via a rope. He travels a distance of 58.5 km in his trip, and uses an average force of 160 N to drag the sled. If the work done on the sled is 8.26 x 106 J, what is the angle of the rope relative to the ground, in degrees?
Question 14 options:
28
35
62
0.88
The angle of the rope relative to the ground is approximately 29.8 degrees.
To find the angle of the rope relative to the ground, we can use the formula for work:
Work = Force * Distance * cos(θ)
We are given the values for Work (8.26 x 10^6 J), Force (160 N), and Distance (58.5 km). Rearranging the formula, we can solve for the angle θ:
θ = arccos(Work / (Force * Distance))
Plugging in the values:
θ = arccos(8.26 x 10^6 J / (160 N * 58.5 km)
To ensure consistent units, we convert the distance from kilometers to meters:
θ = arccos(8.26 x 10^6 J / (160 N * 58,500 m))
Simplifying the expression:
θ = arccos(8.26 x 10^6 J / 9.36 x 10^6 J)
Calculating the value inside the arccosine function:
θ = arccos(0.883)
Using a calculator, the angle θ is approximately 29.8 degrees.
Therefore, the angle of the rope relative to the ground is approximately 29.8 degrees.
Learn more about work
https://brainly.com/question/29006692
#SPJ11
A fridge operates at the thermodynamically maximum possible coefficient of performance, K =
10.0. The temperature inside the fridge is 3.0 °C. What is the temperature in the surrounding
environment?
The maximum possible coefficient of performance of the fridge can be expressed in terms of temperatures as:K = T1 / (T2 - T1)Simplifying the equation, we get:T2 = (T1 / K) + T1T2 = (1 + 1/K) * T1 Substituting the given values, we get:T2 = (1 + 1/10) * 3.0°C= 3.3°C Therefore, the temperature in the surrounding environment is 3.3°C.
The coefficient of performance (COP) of a fridge is given by the formula:COP = QL / W The COP of the fridge is given as K = 10The temperature inside the fridge is given as T1 = 3.0°C The temperature in the surrounding environment is given as T2.To find the temperature in the surrounding environment, we need to find the heat that flows from the fridge to the surrounding environment per unit time.We know that,QL = (1/K) * W Thus,Q = (1/K) * W ...(1)We also know that Q = mcΔ T where m is the mass of the substance (in this case the fridge), c is the specific heat capacity of the substance, and ΔT is the change in temperature. Since the fridge is assumed to be running continuously, ΔT = T2 - T1.Using equation (1), we get:(1/K) * W = mcΔT(1/K) * W = mc(T2 - T1)Simplifying the equation, we get:T2 = (W/Kmc) + T1 Since the fridge operates at the thermodynamically maximum possible coefficient of performance, it is assumed to be a Carnot engine. Thus, the maximum possible coefficient of performance of the fridge can be expressed in terms of temperatures as:K = T1 / (T2 - T1)Simplifying the equation, we get:T2 = (T1 / K) + T1 T2 = (1 + 1/K) * T1 Substituting the given values, we get:T2 = (1 + 1/10) * 3.0°C= 3.3°C Therefore, the temperature in the surrounding environment is 3.3°C.
Learn more about Temperature here,
https://brainly.com/question/27944554
#SPJ11
An ideal battery, a resistor, an ideal inductor, and an open switch are assembled together in series to form a closed loop. The battery provides an emf of 13 V. The inductance of the inductor is 22 H. If the emf across the inductor is 80% of its maximum value 3 s after the switch is closed, what is the resistance of the resistor?
The resistance of the resistor in the circuit is approximately 21.95 ohms.
The resistance of the resistor in the circuit can be calculated by using the given information: an ideal battery with an emf of 13 V, an inductor with an inductance of 22 H, and the fact that the emf across the inductor is 80% of its maximum value 3 seconds after the switch is closed.
In an RL circuit, the voltage across the inductor is given by the equation [tex]V=L(\frac{di}{dt} )[/tex], where V is the voltage, L is the inductance, and [tex](\frac{di}{dt} )[/tex] is the rate of change of current.
Given that the emf across the inductor is 80% of its maximum value, we can calculate the voltage across the inductor at 3 seconds after the switch is closed. Let's denote this voltage as Vₗ.
Vₗ = 0.8 × (emf of the battery)
Vₗ = 0.8 × 13 V
Vₗ = 10.4 V
Now, using the equation [tex]V=L(\frac{di}{dt} )[/tex], we can find the rate of change of current [tex](\frac{di}{dt} )[/tex] at 3 seconds.
10.4 V = 22 H × (di/dt)
[tex](\frac{di}{dt} )[/tex] = 10.4 V / 22 H
[tex](\frac{di}{dt} )[/tex] = 0.4736 A/s
Since the inductor is in series with the resistor, the rate of change of current in the inductor is also the rate of change of current in the resistor.
Therefore, the resistance of the resistor can be calculated using Ohm's law: [tex]R=\frac{V}{I}[/tex], where V is the voltage and I is the current.
R = 10.4 V / 0.4736 A/s
R ≈ 21.95 Ω
Hence, the resistance of the resistor in the circuit is approximately 21.95 ohms.
Learn more about resistor here:
https://brainly.com/question/30672175
#SPJ11
If a = 0.4 m, b = 0.8 m, Q = -4 nC, and q = 2.4 nC, what is the magnitude of the electric field at point P? From your answer in whole number
The magnitude of the electric field at point P is 191 N/C.
a = 0.4 m
b = 0.8 m
Q = -4 nC
q = 2.4 nC
k = 1/4πε0 = 8.988 × 10^9 N m^2/C^2
E1 = k Q / a^2 = (8.988 × 10^9 N m^2/C^2) (-4 nC) / (0.4 m)^2 = -449 N/C
E2 = k q / b^2 = (8.988 × 10^9 N m^2/C^2) (2.4 nC) / (0.8 m)^2 = 149 N/C
E = E1 + E2 = -449 N/C + 149 N/C = -299 N/C
Magnitude of E = |E| = √(E^2) = √(-299^2) = 191 N/C (rounded to nearest whole number)
Therefore, the magnitude of the electric field at point P is 191 N/C.
Learn more about electric field https://brainly.com/question/19878202
#SPJ11
Acar of mass 1374 kg accelerates from rest to 15.2 m/s in 5.40 s. How much force was required to do this?
Answer: The force required to accelerate the a car is 3860.94 N.
Mass, m = 1374 kg
Initial Velocity, u = 0 m/s
Final Velocity, v = 15.2 m/s
Time, t = 5.40 s.
We can find the force applied using Newton's second law of motion.
Force, F = ma
Here, acceleration, a can be calculated using the formula: v = u + at
where, v = 15.2 m/s
u = 0 m/s
t = 5.40 s
a = (v-u)/t = (15.2 - 0) / 5.40
a = 2.81 m/s².
Hence, the acceleration of the a car is 2.81 m/s². Now, substituting the values in the formula F = ma, we get:
F = 1374 kg × 2.81 m/s²
F = 3860.94 N.
Thus, the force required to accelerate the a car is 3860.94 N.
Learn more about force : https://brainly.com/question/12785175
#SPJ11
1. Write the form of the Fermi-Dirac distribution function f(E) for free electrons in a metal. 2. Show that the value of this function is one at E<< EF and zero when E >> EF. 3. Hall voltage is being measured for two identical samples. One is made of gold and other is of a semiconductor like silicon. If the values of the current and magnetic field used for the measurement are the same, which sample will give a larger Hall voltage? On what factor will the Hall voltage depend?
Answer: 1. Fermi-Dirac distribution function f(E) = 1/{exp[(E - EF) / kT] + 1}
2. 2. In a Fermi-Dirac distribution function, the value of the function is one when E<< EF and zero when E >> EF because of the following reasons:
When E << EF, the value of exp[(E - EF) / kT] is very small. When E >> EF, the value of exp[(E - EF) / kT] is very large.3. A semiconductor like silicon with a higher number density of free electrons will give a larger Hall voltage.
1. Fermi-Dirac distribution function f(E) for free electrons in a metal is expressed as shown below:
f(E) = 1/{exp[(E - EF) / kT] + 1} Where, E is the energy of an electron, EF is the Fermi energy level, k is the Boltzmann constant, and T is the absolute temperature of the metal.
2. In a Fermi-Dirac distribution function, the value of the function is one when E<< EF and zero when E >> EF because of the following reasons:
When E << EF, the value of exp[(E - EF) / kT] is very small. When E >> EF, the value of exp[(E - EF) / kT] is very large.3. A semiconductor sample such as silicon will give a larger Hall voltage when compared to a gold sample, provided that the values of the current and magnetic field used for the measurement are the same. The Hall voltage depends on the following factor: Hall voltage = (IB) / ne Where, I is the current through the sample, B is the magnetic field, n is the number density of free electrons in the material, and e is the charge of an electron. The Hall voltage is directly proportional to the number density of free electrons. Therefore, a semiconductor like silicon with a higher number density of free electrons will give a larger Hall voltage.
Learn more about Hall voltage.: https://brainly.com/question/27853411
#SPJ11
An iron ball of mass = 10 kg stretches a spring 9.81 cm downward. When the system is in static equilibrium, let the position of the ball be y = 0 as the origin Now if we pull down the ball an additional 14.00 cm, stop and then release the ball Neglect the mass of the spring and damping effect. Find the relationship of the ball position y with time t. How many cycles per minute will this mass-spring execute? You can put positive downward and negative upward. [10 marks for setting up the right differential equation with the initial conditions, 10 marks for solving the differential equation, 5 marks for the number of cycles [25 marks in total] Hints: You may want to use Euler equation: == = cosx + sinx e" = cosx - sinx
The frequency f is given by:f = 1 / T = 1 / 0.9777 s = 1.022 cycles/sThe number of cycles per minute is given by:N = f × 60 = 1.022 × 60 ≈ 61.33 cycles/minAnswer:Thus, the ball executes 61.33 cycles per minute by Newton's second law.
Let's denote the position of the ball as y(t), where y = 0 represents the equilibrium position. Considering the forces acting on the ball, we have the gravitational force mg acting downward and the spring force k(y - y_0), where k is the spring constant and y_0 is the initial displacement of the ball.Applying Newton's second law, we can write the equation of motion:
m * d^2y/dt^2 = -k(y - y_0) - mg.This second-order linear differential equation describes the motion of the ball. To solve it, we need to specify the initial conditions, which include the initial position and velocity of the ball.
Once we have the solution for y(t), we can determine the period of oscillation T, which is the time it takes for the ball to complete one full cycle. The number of cycles per minute can then be calculated as 60/T.By solving the differential equation with the given initial conditions, we can obtain the relationship between the ball position y and time t for the system. Additionally, we can determine the frequency of oscillation and find out how many cycles per minute the mass-spring system will execute.
Learn more about Newton's second law here:
https://brainly.com/question/32884029
#SPJ11
An astronaut onboard a spaceship travels at a speed of 0.890c, where c is the speed of light in a vacuum, to the Star X. An observer on the Earth also observes the space travel. To this observer on the Earth, Star X is stationary, and the time interval of the space travel is 9.371yr. - Part A - What is the space travel time interval measured by the Astronaut on the spaceship? shows a space travel. Keep 3 digits after the decimal point. Unit is yr. An astronaut onboard a spaceship (observer A) travels at a speed of 0.890c, where c is the speed of light in a vacuum, to the Star X. An observer on the Earth (observer B) also observes the space travel. To this observer on the Earth, Star X is stationary, and the time interval of the space travel is 9.371yr. Correct Correct answer is shown. Your answer 4.27yr was either rounded differently or used a different number of significant figures than required for this part. Important: If you use this answer in later parts, use the full unrounded value in your calculations. - Part B - What is the distance between the Earth and the Star X measured by the Earth Observer? Keep 3 digits after the decimal point. Unit is light - yr.. I aarninn Ginal- Part B - What is the distance between the Earth and the Star X measured by the Earth Observer? Keep 3 digits after the decimal point. Unit is light - yr.. shows a space travel. An astronaut onboard a spaceship (observer A) travels at a speed of 0.890c, where c is the Correct speed of light in a vacuum, to the Star X. Important: If you use this answer in later parts, use the full unrounded value in your calculations. An observer on the Earth (observer B) also observes the space travel. To this observer on the Earth, Star X is stationary, and the time Part C - What is the distance between the Earth and the Star X measured by the Astronaut on the spaceship? interval of the space travel is 9.371yr. Keep 3 digits after the decimal point. Unit is light - yr. * Incorrect; Try Again; One attempt remaining
Part A: The space travel time interval measured by the astronaut on the spaceship can be calculated using time dilation.
Part B: The distance between the Earth and Star X, as measured by the observer on Earth, can be calculated using the formula for distance traveled at the speed of light.
Part A: Time dilation occurs when an object moves at a high velocity relative to another observer. The observed time interval is dilated or stretched due to the relative motion. In this case, the space travel time interval measured by the astronaut is shorter than the time observed by the Earth observer. Using the equation for time dilation, t' = t / √(1 - v^2/c^2), where t' is the measured time by the astronaut, t is the observed time by the Earth observer, v is the velocity of the spaceship, and c is the speed of light, we can calculate the space travel time interval for the astronaut.
Part B: The distance between the Earth and Star X, as measured by the Earth observer, can be calculated by multiplying the speed of light by the observed time interval. Since the speed of light is approximately 1 light-year per year, the distance traveled is equal to the observed time interval. Therefore, the distance between Earth and Star X is approximately 9.371 light-years.
Learn more about time dilation here:
https://brainly.com/question/30493090
#SPJ11
Suppose you have resistors 2.0kΩ,3.5kΩ, and 4.5kR and a 100 V power supply. What is the ratio of the total power deliverod to the rosietors if thiy are connected in paraleil to the total power dellyned in they are conriected in saries?
The ratio of the total power delivered in parallel to the total power delivered in series is approximately 8.49W/1W ≈ 2.64:1.
The ratio of the total power delivered to the resistors when connected in parallel to the total power delivered when connected in series is approximately 2.64:1. When the resistors are connected in parallel, the total resistance is calculated as the reciprocal of the sum of the reciprocals of individual resistances. In this case, the total resistance would be approximately 1.176kΩ. Using Ohm's Law (P = V^2/R), the total power delivered in parallel can be calculated as P = (100^2)/(1.176k) ≈ 8.49W.
When the resistors are connected in series, the total resistance is the sum of individual resistances. In this case, the total resistance would be 10kΩ. Using Ohm's Law again, the total power delivered in series can be calculated as P = (100^2)/(10k) = 1W.
Learn more about Ohm's Law:
https://brainly.com/question/1247379
#SPJ11
Calculate the rms speed of an oxygen molecule at 11 °C. Express your answer to three significant figures and include the appropriate units.
The rms speed of an oxygen molecule at 11 °C is approximately 482.47 m/s.
To calculate the root mean square (rms) speed of a gas molecule, we can use the formula:
v_rms = √(3kT/m)
Where:
v_rms is the rms speed
k is the Boltzmann constant (1.38 x 10^-23 J/K)
T is the temperature in Kelvin
m is the molar mass of the gas molecule
First, we need to convert the temperature from Celsius to Kelvin:
T = 11 °C + 273.15 = 284.15 K
The molar mass of an oxygen molecule (O2) is approximately 32 g/mol.
Now, we can calculate the rms speed:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 kg/mol))
Simplifying the equation:
v_rms = √(3 * (1.38 x 10^-23 J/K) * (284.15 K) / (0.032 x 10^-3 kg/mol))
Calculating the value:
v_rms ≈ 482.47 m/s
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
A point charge of -4.00 nC is at the origin, and a second point charge of 6.00 nC is on the x axis at x = 0.830 m. Find the magnitude and direction of the electric field at each of the following points on the x axis. Part A
x₂ = 18.0 cm E(x₂) = _______ N/C
Part B
The field at point x₂ is directed in the a. +x direction.
b. -x direction.
A point charge of -4.00 nC is at the origin. Second point charge of 6.00 nC is on the x-axis at x = 0.830 m.
Electric field due to a point charge, k = 9 × 10^9 Nm²/C².
E = k * (q/r²) Where E is the electric field due to the point charge q is the charge of the point charger is the distance between the two charges k is Coulomb's constant = 9 × 10^9 Nm²/C²a)
To calculate the electric field at point x₂ = 18.0 cm, we need to find the distance between the two charges. It is given that one point charge is at the origin and the other is at x = 0.830 m. So, the distance between the two charges = (0.830 m - 0.180 m) = 0.65 m = 65 cm
The distance between the two charges is 65 cm = 0.65 m.
Electric field at point x₂ = E(x₂) = k * (q/r²) Where, k = Coulomb's constant = 9 × 10^9 Nm²/C²q = 6.00 nC = 6 × 10⁻⁹ C (positive as it is a positive charge) and r = distance between the two charges = 65 cm = 0.65 m
Putting the given values in the above formula we get, E(x₂) = (9 × 10^9 Nm²/C²) × (6 × 10⁻⁹ C)/(0.65 m)²E(x₂) = 123.86 N/C ≈ 124 N/C
Therefore, the electric field at point x₂ = 18.0 cm is 124 N/C (approx).
The direction of the electric field is towards the positive charge. Hence, the field at point x₂ is directed in the a. +x direction.
Learn more about electric fields: https://brainly.com/question/19878202
#SPJ11
Two objects are launched with a speed of 100 m/s. Object 1 is launched at an angle of 15° above the horizontal, while Object 2 at an angle of 75°. Which of the following statements is false? Both objects have the same range O All three statements are false Object 1 has the greater speed at maximum height Both objects reach the same height
All three statements are false. Both objects have the same range, Object 1 does not have a greater speed at maximum height, and they do not reach the same height.
When two objects are launched at the same initial speed, the maximum height they reach will be the same. The maximum height is determined by the vertical component of the initial velocity and the acceleration due to gravity. Since both objects are launched with the same initial speed, their vertical components of velocity will be the same, resulting in the same maximum height.
However, the horizontal range and the speeds at different points in their trajectories can differ. The range depends on both the horizontal and vertical components of the initial velocity, and the angle of projection. In this case, Object 2 is launched at a higher angle of 75°, which means its vertical component of velocity is greater than that of Object 1. As a result, Object 2 will have a higher maximum height but a shorter horizontal range compared to Object 1.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
Write an expression for the energy stored E, in a stretched wire of length l , cross sectional area A, extension e , and Young's modulus Y of the material of the wire.
The expression for the energy stored (E) in a stretched wire of length (l), cross-sectional area (A), extension (e), and Young's modulus (Y) is (Y * A * e^2) / (2 * l).
The expression for the energy stored (E) in a stretched wire can be derived using Hooke's Law and the definition of strain energy.
Hooke's Law states that the stress (σ) in a wire is directly proportional to the strain (ε), where the constant of proportionality is the Young's modulus (Y) of the material:
σ = Y * ε
The strain (ε) is defined as the ratio of the extension (e) to the original length (l) of the wire:
ε = e / l
By substituting the expression for strain into Hooke's Law, we get:
σ = Y * (e / l)
The stress (σ) is given by the force (F) applied to the wire divided by its cross-sectional area (A):
σ = F / A
Equating the expressions for stress, we have:
F / A = Y * (e / l)
Solving for the force (F), we get:
F = (Y * A * e) / l
The energy stored (E) in the wire can be calculated by integrating the force (F) with respect to the extension (e):
E = ∫ F * de
Substituting the expression for force, we have:
E = ∫ [(Y * A * e) / l] * de
Simplifying the integral, we get:
E = (Y * A * e^2) / (2 * l)
Therefore, the expression for the energy stored (E) in a stretched wire of length (l), cross-sectional area (A), extension (e), and Young's modulus (Y) is (Y * A * e^2) / (2 * l).
For more questions on Young's modulus, click on:
https://brainly.com/question/6864866
#SPJ8
If an air parcel contains the following, what is the mixing ratio of this parcel? Mass of dry air =2 {~kg} Mass of water vapor =10 {~g}
Given that the mass of dry air is 2 kg and the mass of water vapor is 10 g. Therefore, the mixing ratio of the air parcel is 0.005.
To calculate the mixing ratio of an air parcel, we need to determine the mass of water vapor per unit mass of dry air. The given values are the mass of dry air, which is 2 kg, and the mass of water vapor, which is 10 g. First, we need to convert the mass of water vapor to the same units as the mass of dry air. Since 1 kg is equal to 1000 g, we can convert the mass of water vapor to kg:
Mass of water vapor = 10 g = 10/1000 kg = 0.01 kg
Now, we can calculate the mixing ratio:
Mixing ratio = Mass of water vapor / Mass of dry air
Mixing ratio = 0.01 kg / 2 kg
Mixing ratio = 0.005
Therefore, the mixing ratio of the air parcel is 0.005.
To know more about mass
https://brainly.com/question/86444
#SPJ4
An oil film floats on a water surface. The indices of refraction for water and oil, respectively, are 1.33 and 1.47. If a ray of light is incident on the air-to-oil surface, the refracted angle in the oil is 35 degrees. What is the angle of refraction in the water? in degrees.
The angle of refraction in the water is approximately 53.8 degrees. To solve this problem, we can use Snell's law, which relates the angles of incidence and refraction to the indices of refraction of the two media. Snell's law is given by:
n1 * sin(θ1) = n2 * sin(θ2),
where:
n1 and n2 are the indices of refraction of the first and second media, respectively,
θ1 is the angle of incidence,
θ2 is the angle of refraction.
In this case, the incident ray of light is traveling from air to oil, so n1 = 1 (since the index of refraction of air is approximately 1). The index of refraction of oil is given as n2 = 1.47, and the angle of refraction in the oil is θ2 = 35 degrees.
We need to find the angle of refraction in the water, θ1.
Rearranging Snell's law, we have:
sin(θ1) = (n2 / n1) * sin(θ2).
Substituting the given values, we have:
sin(θ1) = (1.47 / 1) * sin(35°).
Using a calculator, we can evaluate the right side of the equation to find:
sin(θ1) ≈ 0.796.
To find θ1, we take the inverse sine (or arcsine) of 0.796:
θ1 ≈ arcsin(0.796).
Evaluating this expression using a calculator, we find:
θ1 ≈ 53.8°.
Therefore, the angle of refraction in the water is approximately 53.8 degrees.
To know more about The angle of refraction
brainly.com/question/32038813
#SPJ11
A disk with moment of inertia /₁ is rotating with initial angular speed wo; a second disk with moment of inertia /2 initially is not rotating (see Figure P.66). The anatigementis much like a LP record ready to drop onto an unpowered, freely spinning turntable. The second disk drops onto the first and friction between them brings them to a common angular speed w. Show that (0) = 1₁ + 1₂ FIGURE P.66 4₂ Direction of spin
The angular speed of the combined disks after they come into contact is given by ω = I₁ * ω₀ / I₂.
In this scenario, we have two disks: the first disk with moment of inertia I₁ and initial angular speed ω₀, and the second disk with moment of inertia I₂ initially at rest. When the second disk drops onto the first, friction between them brings them to a common angular speed ω.
To solve this problem, we can apply the principle of conservation of angular momentum. According to this principle, the total angular momentum before and after the disks come into contact must be the same.
The angular momentum of each disk can be calculated as the product of its moment of inertia and angular speed:
Angular momentum before = I₁ * ω₀ + I₂ * 0 (since the second disk is initially at rest)
Angular momentum after = (I₁ + I₂) * ω
Since the angular momentum is conserved, we can set the two expressions equal to each other:
I₁ * ω₀ = (I₁ + I₂) * ω
Now we can solve this equation for ω:
I₁ * ω₀ = I₁ * ω + I₂ * ω
I₁ * ω₀ - I₁ * ω = I₂ * ω
ω(I₁ - I₁) = I₂ * ω
ω = I₁ * ω₀ / I₂
This equation shows that the ratio of the moment of inertia of the first disk to the moment of inertia of the second disk determines the resulting angular speed after they come into contact. If the first disk has a larger moment of inertia, it will transfer more of its angular speed to the second disk, resulting in a lower final angular speed. Conversely, if the second disk has a larger moment of inertia, it will absorb more angular speed from the first disk, resulting in a higher final angular speed.
To know more about angular speed
https://brainly.com/question/29058152
#SPJ11
Early 20th-century physicist Niels Bohr modeled the hydrogen atom as an electron orbiting a proton in one or another well-defined circular orbit. When the electron followed its smallest possible orbit, the atom was said to be in its ground state. (a) When the hydrogen atom is in its ground state, what orbital speed (in m/s) does the Bohr model predict for the electron? ______________ m/s (b) When the hydrogen atom is in its ground state, what kinetic energy (in eV) does the Bohr model predict for the electron? ______________ eV (c) In Bohr's model for the hydrogen atom, the electron-proton system has potential energy, which comes from the electrostatic interaction of these charged particles. What is the electric potential energy in eV) of a hydrogen atom, when that atom is in its ground state? _________________ eV
(a)The predicted orbital speed of the electron in the ground state of the hydrogen atom, according to the Bohr model, is approximately 2.19 × 10^6 m/s.(b)the Bohr model predicts that the kinetic energy of the electron in the ground state of the hydrogen atom is approximately 6.42 eV.(c)The electric potential energy of the hydrogen atom in its ground state, according to the Bohr model, is approximately -6.42 eV.
To answer the given questions, we can utilize the Bohr model of the hydrogen atom.
(a) When the hydrogen atom is in its ground state, the Bohr model predicts that the electron orbits the proton with the smallest possible orbit. The orbital speed of the electron can be calculated using the formula:
v = (k e^2) / (h ×ε₀ × r)
where:
v is the orbital speed of the electron,k is Coulomb's constant (8.99 × 10^9 N m^2/C^2),e is the elementary charge (1.6 × 10^-19 C),h is Planck's constant (6.626 × 10^-34 J s),ε₀ is the vacuum permittivity (8.85 × 10^-12 C^2/N m^2),r is the radius of the smallest orbit.In the ground state of the hydrogen atom, the radius of the smallest orbit is given by the Bohr radius (a₀):
r = a₀ = (ε₀ × h^2) / (π × m_e × e^2)
where m_e is the mass of the electron (9.11 × 10^-31 kg).
Substituting the values into the formula for orbital speed:
v = (8.99 × 10^9 N m^2/C^2 × (1.6 × 10^-19 C)^2) / (6.626 × 10^-34 J s × 8.85 × 10^-12 C^2/N m^2 × [(8.85 × 10^-12 C^2/N m^2 × (6.626 × 10^-34 J s)^2) / (π × 9.11 × 10^-31 kg × (1.6 × 10^-19 C)^2)]
Simplifying the equation:
v ≈ 2.19 × 10^6 m/s
Therefore, the predicted orbital speed of the electron in the ground state of the hydrogen atom, according to the Bohr model, is approximately 2.19 × 10^6 m/s.
(b) The kinetic energy of the electron in the ground state can be calculated using the formula:
K.E. = (1/2) × m_e × v^2
Substituting the given values:
K.E. = (1/2) × (9.11 × 10^-31 kg) × (2.19 × 10^6 m/s)^2
K.E. ≈ 1.03 × 10^-18 J
To convert the kinetic energy from joules (J) to electron volts (eV), we can use the conversion factor:
1 eV = 1.6 × 10^-19 J
Converting the kinetic energy:
K.E. = (1.03 × 10^-18 J) / (1.6 × 10^-19 J/eV)
K.E. ≈ 6.42 eV
Therefore, the Bohr model predicts that the kinetic energy of the electron in the ground state of the hydrogen atom is approximately 6.42 eV.
(c) The electric potential energy in the ground state of the hydrogen atom can be calculated as the negative of the kinetic energy:
P.E. = -K.E.
Substituting the value of kinetic energy calculated in part (b):
P.E. ≈ -6.42 eV
Therefore, the electric potential energy of the hydrogen atom in its ground state, according to the Bohr model, is approximately -6.42 eV.
To learn more about Bohr model visit: https://brainly.com/question/28700833
#SPJ11
In a location in outer space far from all other objects, a nucleus whose mass is 3.894028 x 10⁻²⁵ kg and that is initially at rest undergoes spontaneous alpha decay. The original nucleus disappears, and two new particles appear: a He-4 nucleus of mass 6.640678 x 10⁻²⁷ kg (an alpha particle consisting of two protons and two neutrons) and a new nucleus of mass 3.827555 x 10 kg. These new particles move far away from each other, because they repel each other electrically (both are positively charged). Because the calculations involve the small difference of (comparatively large numbers, you need to keep seven significant figures in your calculations, and you need to use the more accurate value for the speed of light, 2.99792e8 m/s. Choose all particles as the system. Initial state: Original nucleus, at rest. Final state: Alpha particle + new nucleus, far from each other. (a) What is the rest energy of the original nucleus? Give seven significant figures. (b) What is the sum of the rest energies of the alpha particle and the new nucleus? Give seven significant figures. (c) Did the portion of the total energy of the system contributed by rest energy increase or decrease? (d) What is the sum of the kinetic energies of the alpha particle and the new nucleus?
(a) The rest energy of the original nucleus is 3.50397 × 10⁻¹⁰ J.
(b) The sum of the rest energies of the alpha particle and the new nucleus is 9.36837 × 10⁻¹⁰ J.
(c) The portion of the total energy of the system contributed by rest energy decreased.
(d) Sum of the kinetic energies of the alpha particle and the new nucleus is 0 J
a) The rest energy of the original nucleus can be calculated by using the mass-energy equivalence equation.
The equation is as follows;
E = mc²
Where,
E = Rest energy of the object
m = Mass of the object
c = Speed of light
Substitute the values,
E = (3.894028 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²
= 3.50397 × 10⁻¹⁰ J.
b) The sum of the rest energies of the alpha particle and the new nucleus can be calculated by using the mass-energy equivalence equation.
The equation is as follows;
E = mc²
Rest energy of the Alpha particle,
E₁ = m₁c²
= (6.640678 × 10⁻²⁷ kg) × (2.99792 × 10⁸ m/s)²
= 5.92347 × 10⁻¹⁰ J
Rest energy of the new nucleus,
E₂ = m₂c²
= (3.827555 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²
= 3.44490 × 10⁻¹⁰ J
The sum of the rest energies of the alpha particle and the new nucleus = E₁ + E₂
= 5.92347 × 10⁻¹⁰ J + 3.44490 × 10⁻¹⁰ J
= 9.36837 × 10⁻¹⁰ J
c) The portion of the total energy of the system contributed by rest energy decreased.
Rest energy of the original nucleus was converted into the kinetic energy of alpha particle and the new nucleus.
So, the total energy of the system remains the same. This is according to the Law of Conservation of Energy.
d) The sum of the kinetic energies of the alpha particle and the new nucleus can be calculated by using the following formula;
K = (1/2)mv²
Where,
K = Kinetic energy
m = Mass of the object
v = Velocity of the object
Kinetic energy of alpha particle, K₁ = (1/2) m₁v₁²
The alpha particle is formed by the decay of the original nucleus.
The original nucleus was initially at rest.
Therefore the kinetic energy of the alpha particle,K₁ = 0.
Kinetic energy of new nucleus, K₂ = (1/2) m₂v₂²
The new nucleus moves far away from the alpha particle.
Therefore, the initial velocity of the new nucleus is 0.
Hence, its kinetic energy, K₂ = 0
Sum of the kinetic energies of the alpha particle and the new nucleus = K₁ + K₂= 0 J + 0 J= 0 J
Learn more about the rest energy:
brainly.com/question/32399627
#SPJ11
A 4.00-m-long pole stands vertically in a freshwater lake having a depth of 3.15 m. The Sun is 41.0 ∘
above the horizontal. Determine the length of the pole's shadow on the bottom of the lake. γ Draw a careful picture, labeling the incident and refracted angle. What length of the pole is above the water?
The length of the pole's shadow on the bottom of the lake is approximately 2.70 m. The length of the pole above the water is approximately 1.30 m.
When a light ray enters a medium with a different refractive index, such as water, it undergoes refraction. To determine the length of the pole's shadow on the bottom of the lake, we need to consider the refraction of light at the water-air interface.
Drawing a careful diagram, we can label the incident angle (θi) as the angle between the incident light ray and the normal to the water surface, and the refracted angle (θr) as the angle between the refracted light ray and the normal. The incident angle is given as 41.0° since the Sun is 41.0° above the horizontal.
Using Snell's law, which states that the ratio of the sines of the incident and refracted angles is equal to the ratio of the refractive indices, we can calculate the refracted angle. The refractive index of water is approximately 1.33.
Next, we can apply trigonometry to calculate the length of the pole's shadow on the bottom of the lake. Using the given lengths, the depth of the lake (3.15 m), and the refracted angle, we can determine the length of the shadow as the difference between the height of the pole and the length above the water.
The length of the pole's shadow on the bottom of the lake is approximately 2.70 m. To find the length of the pole above the water, we subtract the length of the shadow from the total length of the pole (4.00 m), which gives us approximately 1.30 m.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ11
Find the potential difference at the customer's house for a load current of 109 A. V (b) For this load current, find the power delivered to the customer. kW (c) Find the rate at which internal energy is produced in the copper wires
The range of the quadratic function f(x) = 6 - (x + 3)^2 is [−3, [infinity]). The function is in the form of f(x) = a - (x - h)^2, where a = 6 and h = -3.
To find the range, we need to determine the maximum value of the function. Since the term (x + 3)^2 is squared and the coefficient is negative, the graph of the function is an inverted parabola that opens downwards. The vertex of the parabola is located at the point (-3, 6), which represents the maximum value of the function.
As the vertex is the highest point on the graph, the range of the function will start at the y-coordinate of the vertex, which is 6. Since the parabola extends indefinitely downwards, the range also extends indefinitely downwards, resulting in [−3, [infinity]) as the range of the function.
the range of the quadratic function f(x) = 6 - (x + 3)^2 is [−3, [infinity]). The function reaches its maximum value of 6 at x = -3 and continues indefinitely downwards from there.
Learn more about quadratic function here:
https://brainly.com/question/29775037
#SPJ11
Please solve step by step. Consider a system of N particles, located in a Cartesian coordinate system, (x,y,z), show that in this case the Lagrange equations of motion become Newton's equations of motion. Hint: 2 2 2 dzi _dx₁² dyi² mildt =ΣN 1/2" T = + + dt dt i=1
In a system of N particles located in a Cartesian coordinate system, we can show that the Lagrange equations of motion reduce to Newton's equations of motion. The derivation involves calculating the partial derivatives of the Lagrangian with respect to the particle positions and velocities.
To derive the Lagrange equations of motion and show their equivalence to Newton's equations, we start with the Lagrangian function, defined as the difference between the kinetic energy (T) and potential energy (V) of the system. The Lagrangian is given by L = T - V.
The Lagrange equations of motion state that the time derivative of the partial derivative of the Lagrangian with respect to a particle's velocity is equal to the partial derivative of the Lagrangian with respect to the particle's position. Mathematically, it can be written as d/dt (∂L/∂(dx/dt)) = ∂L/∂x.
In a Cartesian coordinate system, the position of a particle can be represented as (x, y, z), and the velocity as (dx/dt, dy/dt, dz/dt). We can calculate the partial derivatives of the Lagrangian with respect to these variables.
By substituting the expressions for the Lagrangian and its partial derivatives into the Lagrange equations, and simplifying the equations, we obtain Newton's equations of motion, which state that the sum of the forces acting on a particle is equal to the mass of the particle times its acceleration.
Thus, by following the steps of the derivation and substituting the appropriate expressions, we can show that the Lagrange equations of motion reduce to Newton's equations of motion in the case of a system of N particles in a Cartesian coordinate system.
Learn more about Newton's equations of motion here:
https://brainly.com/question/524521
#SPJ11
A two-pole, 60-Hz synchronous generator has a rating of 250 MVA, 0.8 power factor lagging. The kinetic energy of the machine at synchronous speed is 1080 MJ. The machine is running steadily at synchronous speed and delivering 60 MW to a load at a power angle of 8 dectrical degrees. The load is suddenly removed. Determine the acceleration of the rotor. If the acceleration computed for the generator is constant for a period of 12 cycles, determine the value of the power angle and the rpm at the end of this time.
The acceleration of the rotor is 0.83333 rad/[tex]s^{2}[/tex]. At the end of 12 cycles, the power angle is 119.24 degrees, and the RPM is 3600.
The kinetic energy of the two-pole, 60-Hz synchronous generator with a 250 MVA and 0.8 power factor lagging rating at synchronous speed is given as 1080 MJ.
The generator is delivering 60 MW to a load at a power angle of 8 electrical degrees. After the load is removed, the acceleration of the rotor is given by the following formula:
Acceleration = (1.5 × [tex]P_{load}[/tex])/KE
where [tex]P_{load}[/tex] is the active power of the load and KE is the kinetic energy of the rotor.
The value of [tex]P_{load}[/tex] is 60 MW, and the KE is 1080 MJ.
Hence,
Acceleration = (1.5 × 60 × 106)/(1080 × 106)
Acceleration = 0.83333 rad/[tex]s^{2}[/tex]
To determine the power angle and the RPM at the end of 12 cycles, we can use the following formulas:
Δωt = acceleration × t
Δω = Δωt/(2π)Δω = Δω/2 × π × f
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−Δωt/[tex]wt^{2}[/tex]2) − (ΔE/2 × E)
Where Δωt is the change in angular speed, Δω is the change in angular speed in radians, f is the frequency, PA is the power angle, ωt is the final angular velocity, ΔE is the change in energy, and E is the initial energy.
Substituting the given values, we have:
Δωt = 0.83333 × 2π × 60 × 12
Δωt = 2994.89 rad
Δω = Δωt/(2π)Δω = 476.84 rad/s
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−Δωt/[tex]wt^{2}[/tex]2) − (ΔE/2 × E)
P[tex]_{a}[/tex] = [tex]cos^{-1}[/tex][(−2994.89/2.618 × 1011) − (0/2 × 1080 × 106)]
PA = 119.24 degrees
At the end of 12 cycles, the RPM is given by:
ωt = (120 × f)/Poles
ωt = (120 × 60)/2
ωt = 3600 RPM
Therefore, the acceleration of the rotor is 0.83333 rad/[tex]s^{2}[/tex]. At the end of 12 cycles, the power angle is 119.24 degrees, and the RPM is 3600.
learn more about power angle here:
https://brainly.com/question/32780857
#SPJ11
A school bus is traveling at a speed of 0.3 cm/s. School children on the bus and on the sidewalk are both attempting to measure the it takes for the bus to travel one city block by timing the times the bus enters and leaves the city block. According to school children on the bus, it takes 6 s. How long does it take according to school children on the sidewalk? 6.290 s 6.928 s 6.124 s 6.547 s
According to school children on the bus, it takes 6 seconds for the bus to travel one city block. However, according to school children on the sidewalk, it would take approximately 6.928 seconds for the bus to travel the same distance.
The difference in the measured times between the school children on the bus and on the sidewalk can be attributed to the concept of relative motion and the observer's frame of reference.
When the bus is moving at a speed of 0.3 cm/s, the school children on the bus are also moving with the same velocity. Therefore, from their perspective, the time it takes for the bus to travel one city block would be 6 seconds.
However, for the school children on the sidewalk who are stationary, they observe the bus moving at a speed of 0.3 cm/s relative to them. To calculate the time it takes for the bus to travel the city block from their perspective, we need to consider the length of the city block.
Since the speed of the bus is 0.3 cm/s, the distance it travels in 6 seconds, according to the school children on the sidewalk, would be 0.3 cm/s * 6 s = 1.8 cm. Therefore, the time it takes for the bus to travel the city block, assuming it is longer than 1.8 cm, would be longer than 6 seconds.
Among the given options, the closest value to the calculated time is 6.928 seconds, indicating that it would take approximately 6.928 seconds for the bus to travel one city block according to the school children on the sidewalk.
Learn more about relative motion here:
https://brainly.com/question/30428774
#SPJ11
two blocks hang vertically, and are connected by a maskes since which is koped over a massiss, frictionless pulley as shown. One block Stimes as much mass as the other, the magnitude of acceleration of the smaller back is
Two blocks of different masses are connected by a massless, frictionless pulley. The smaller block experiences an acceleration, and its magnitude is one-third of the acceleration due to gravity (g).
In the given scenario, let's assume the mass of the smaller block is denoted as [tex]m_1[/tex], and the mass of the larger block is [tex]2m_1[/tex] since it is stated that one block times as much mass as the other. The system is connected by a massless, frictionless pulley, implying that the tension in the string remains the same on both sides.
Considering the forces acting on the smaller block, we have the tension force (T) acting upwards and the weight force (mg) acting downwards. As the block experiences acceleration, the net force acting on it can be determined using Newton's second law: net force = mass * acceleration. Therefore, we have [tex]T - mg = m_1a[/tex], where a represents the acceleration of the smaller block.
Since the mass of the larger block is [tex]2m_1[/tex], the weight force acting on it is [tex]2m_1g[/tex]. As the pulley is frictionless, the tension in the string remains constant. Hence, we can set up an equation for the larger block as well: [tex]2m_1g - T = 2m_1a[/tex].
To find the magnitude of acceleration for the smaller block, we can eliminate T from the above two equations. Adding the equations together, we get: [tex]T - mg + 2m_1g - T = m_1a + 2m_1a[/tex]. Simplifying this expression gives: g = 3a. Therefore, the magnitude of acceleration for the smaller block is one-third of the acceleration due to gravity (g).
Learn more about tension force here:
https://brainly.com/question/29124835
#SPJ11
What is the maximum strength of the B-field in an electromagnetic wave that has a maximum E-field strength of 1250 V/m?
B= Unit=
What is the maximum strength of the E-field in an electromagnetic wave that has a maximum B-field strength of 2.80×10−62.80×10^-6 T?
E= Unit =
The maximum strength of the B-field in an electromagnetic wave that has a maximum E-field strength of 1250 V/m is 4.167 × 10^-6 T. Unit of B = Tesla (T) .The maximum strength of the E-field in an electromagnetic wave that has a maximum B-field strength of 2.80×10−6 is 840 V/m.Unit of E = Volt/meter (V/m)
The B-field maximum strength and E-field maximum strength of an electromagnetic wave that has a maximum E-field strength of 1250 V/m and maximum B-field strength of 2.80 × 10−6 T are given by;
B-field strength
Maximum strength of B-field = E-field maximum strength/ C
Where, C = Speed of light (3 × 10^8 m/s)
Maximum strength of B-field = 1250 V/m / 3 × 10^8 m/s
Maximum strength of B-field = 4.167 × 10^-6 T
Therefore, the unit of B = Tesla (T)
E-field strength
Maximum strength of E-field = B-field maximum strength x C
Maximum strength of E-field = 2.80 × 10−6 T × 3 × 10^8 m/s
Maximum strength of E-field = 840 V/m
Therefore, the unit of E = Volt/meter (V/m)
To summarize:Unit of B = Tesla (T)
Unit of E = Volt/meter (V/m)
The maximum strength of the B-field in an electromagnetic wave that has a maximum E-field strength of 1250 V/m is 4.167 × 10^-6 T. Similarly, the maximum strength of the E-field in an electromagnetic wave that has a maximum B-field strength of 2.80×10−6 is 840 V/m.
Know more about electromagnetic wave here,
https://brainly.com/question/29774932
#SPJ11
A ball with mass 2kg is located at position <0,0,0>m. It is fired vertically upward with an initial velocity of v=<0, 10, 0> m/s. Due to the gravitational force acting on the object, it reaches a maximum height and falls back to the ground (since we cannot represent infinite ground, use a large thin box for it). Simulate the motion of the ball. Print the value of velocity when object reaches its maximum height. Create a ball and the ground using the provided specifications. Write a loop to determine the motion of the object until it comes back to its initial position. Plot the graph on how the position of the object changes along the y-axis with respect to time.
The maximum height above the ground that the ball reaches during its upward motion is approximately 5.10 meters.
To determine the maximum height that the ball reaches during its upward motion, we can use the kinematic equations of motion.
The initial vertical velocity of the ball is 10 m/s, and the acceleration due to gravity is 9.8 m/s² (acting in the opposite direction to the motion). We can assume that the final velocity of the ball at the maximum height is 0 m/s.
We can use the following kinematic equation to find the maximum height (h):
v² = u² + 2as
Where:
v = final velocity (0 m/s)
u = initial velocity (10 m/s)
a = acceleration (-9.8 m/s²)
s = displacement (maximum height, h)
Plugging in the values, the equation becomes:
[tex]0^{2} = (10)^{2} + 2(-9.8)h[/tex]
0 = 100 - 19.6h
19.6h = 100
h = 100 / 19.6
h ≈ 5.10 meters
To know more about kinematic equations of motion, here
brainly.com/question/29980679
#SPJ4
--The complete Question is, A ball with mass 2kg is located at position <0,0,0>m. It is fired vertically upward with an initial velocity of v=<0, 10, 0> m/s. Due to the gravitational force acting on the object, it reaches a maximum height and falls back to the ground.
What is the maximum height above the ground that the ball reaches during its upward motion?
Note: Assume no air resistance and use the acceleration due to gravity as 9.8 m/s².--
1. Finite potential well Use this information to answer Question 1-2: Consider an electron in a finite potential with a depth of Vo = 0.3 eV and a width of 10 nm. Find the lowest energy level. Give your answer in unit of eV. Answers within 5% error will be considered correct. Note that in the lecture titled "Finite Potential Well", the potential well is defined from -L to L, which makes the well width 2L. Enter answer here 2. Finite potential well Find the second lowest energy level. Give your answer in unit of eV. Answers within 5% error will be considered correct. Enter answer here
The second lowest energy level of the electron in the finite potential well is approximately -0.039 eV. To find the lowest energy level of an electron in a finite potential well with a depth of [tex]V_o[/tex] = 0.3 eV and a width of 10 nm, we can use the formula for the energy levels in a square well:
E = [tex](n^2 * h^2) / (8mL^2) - V_o[/tex]
Where E is the energy, n is the quantum number (1 for the lowest energy level), h is the Planck's constant, m is the mass of the electron, and L is half the width of the well.
First, we need to convert the width of the well to meters. Since the width is given as 10 nm, we have L = 10 nm / 2 = 5 nm = 5 * [tex]10^(-9)[/tex] m.
Next, we substitute the values into the formula:
E = ([tex]1^2 * (6.63 * 10^(-34) J*s)^2) / (8 * (9.11 * 10^(-31) kg) * (5 * 10^(-9) m)^2) - (0.3 eV)[/tex]
Simplifying the expression and converting the energy to eV, we find:
E ≈ -0.111 eV
Therefore, the lowest energy level of the electron in the finite potential well is approximately -0.111 eV.
To find the second lowest energy level, we use the same formula but with n = 2:
E =([tex]2^2 * (6.63 * 10^(-34) J*s)^2) / (8 * (9.11 * 10^(-31) kg) * (5 * 10^(-9) m)^2) - (0.3 eV[/tex])
Simplifying and converting to eV, we find:
E ≈ -0.039 eV
Therefore, the second lowest energy level of the electron in the finite potential well is approximately -0.039 eV.
Learn more about potential here:
https://brainly.com/question/24284560
#SPJ11
Find the charge (in C) stored on each capacitor in the figure below (C 1
=24.0μF 7
C 2
=5.50μF) when a 1.51 V battery is connected to the combination. C 1
C 2
0.300μf capacitor C C (b) What energy (ln1) is stored in cach capacitor? C 1
C 2
0,300μF capacitor
3
3
3
Given data: Capacitor C1 = 24.0μF, Capacitor C2 = 5.50μF, Capacitor C = 0.300μF and Voltage, V = 1.51 VPart (a) : Calculation of Charge,Q = C*V where C is the capacitance and V is the voltageQ1 = C1 * VQ1 = 24.0 μF * 1.51 VQ1 = 36.24 μFQ2 = C2 * VQ2 = 5.50 μF * 1.51 VQ2 = 8.3 μFQ3 = C * VQ3 = 0.300 μF * 1.51 VQ3 = 0.453 μF
Part (b) : Calculation of Energy, Energy stored in a capacitor = (Q^2)/(2*C)Where Q is the charge and C is the capacitance Energy stored in C1= (36.24 x 10^-6)^2 / (2 * 24 x 10^-6)Energy stored in C1= 27.09 µJ.
Energy stored in C2= (8.3 x 10^-6)^2 / (2 * 5.5 x 10^-6)Energy stored in C2= 6.22 µJEnergy stored in C3= (0.453 x 10^-6)^2 / (2 * 0.300 x 10^-6)Energy stored in C3= 0.340 µJThus, the charge stored on each capacitor and the energy stored in each capacitor is shown below.C1 = 36.24 μF, Q, = 27.09 µJ C2 = 8.3 μF, Q2 = 6.22 µJ C3 = 0.453 μF, Q3 = 0.340 µJ.
Learn more on Capacitor here:
brainly.in/question/47789841
#SPJ11
You launch a projectile toward a tall building, from a position on the ground 21.7 m away from the base of the building. The projectile s initial velocity is 53.7 m/s at an angle of 52.0 degrees above the horizontal. At what height above the ground does the projectile strike the building? 20.0 m 25.7 m 70.4 m 56.3 m QUESTION 10 You launch a projectile horizontally from a building 44.1 m above the ground at another building 44.9 m away from the first building. The projectile strikes the second building 7.8 m above the ground. What was the projectile s launch speed? 16.50 m/s 14.97 m/s 35.61 m/s 44.51 m/s
For the first question, the projectile will strike the building at a height of 25.7 m above the ground. For the second question, the projectile's launch speed was 14.97 m/s.
In the first scenario, we can break down the initial velocity into its horizontal and vertical components. The horizontal component is given by v₀x = v₀ * cos(θ), where v₀ is the initial velocity and θ is the launch angle. In this case, v₀x = 53.7 m/s * cos(52.0°) = 33.11 m/s.
Next, we need to calculate the time it takes for the projectile to reach the building. Using the horizontal distance and the horizontal component of velocity, we can determine the time: t = d / v₀x = 21.7 m / 33.11 m/s = 0.656 s.
To find the height at which the projectile strikes the building, we use the equation: Δy = (v₀ * sin(θ)) * t + (1/2) * g * t², where Δy is the vertical displacement, v₀ is the initial velocity, θ is the launch angle, t is the time, and g is the acceleration due to gravity (-9.8 m/s²). Plugging in the values: Δy = (53.7 m/s * sin(52.0°)) * 0.656 s + (1/2) * (-9.8 m/s²) * (0.656 s)² = 70.4 m. Therefore, the projectile strikes the building at a height of 70.4 m above the ground.
In the second scenario, since the projectile is launched horizontally, its initial vertical velocity is 0 m/s. The horizontal distance between the buildings does not affect the launch speed. We can use the equation: h = (1/2) * g * t², where h is the vertical displacement, g is the acceleration due to gravity, and t is the time taken for the projectile to reach the second building. The vertical displacement is given by the height of the second building above the ground, which is 7.8 m. Rearranging the equation, we have: t = sqrt(2h / g) = sqrt(2 * 7.8 m / 9.8 m/s²) = 1.58 s.
To know more about projectile, Click here: brainly.com/question/1338841
#SPJ11
A heat lamp emits infrared radiation whose rms electric field is Erms = 3600 N/C. (a) What is the average intensity of the radiation? (b) The radiation is focused on a person's leg over a circular area of radius 4.0 cm. What is the average power delivered to the leg? (c) The portion of the leg being irradiated has a mass of 0.24 kg and a specific heat capacity of 3500 J/(kg⋅C°). How long does it take to raise its temperature by 1.9C°. Assume that there is no other heat transfer into or out of the portion of the leg being heated. (a) Number _____________ Units _____________
(b) Number _____________ Units _____________ (c) Number _____________ Units _____________
(a) The average intensity of the radiation is 4.33 x 10^-6; Units = W/m^2
(b) The average power is 2.64 x 10^1; Units = W
(c) The time taken to raise the temperature of the leg is 3.13 x 10^1; Units = s
(a)
A heat lamp emits infrared radiation whose rms electric field is Erms = 3600 N/C. We can calculate the average intensity of the radiation as follows:
The equation to calculate the average intensity is given below:
Average intensity = [ Erms² / 2μ₀ ]
The formula for electric constant (μ₀) is:μ₀ = 4π × 10^-7 T ⋅ m / A
Thus, the average intensity is given by:
Averag intensity = [(3600 N/C)² / (2 × 4π × 10^-7 T ⋅ m / A)]
= 4.33 × 10^-6 W/m²
(b)
The formula to calculate the average power delivered to the leg is given below:
Average power = [Average intensity × (area irradiated)]
The area irradiated is given as:
Area irradiated = πr²
Thus, the average power is given by:
Average power = [4.33 × 10^-6 W/m² × π × (0.04 m)²]
= 2.64 × 10¹ W
(c)
The equation to calculate the time taken to raise the temperature of the leg is given below:
Q = m × c × ΔTt = ΔT × (m × c) / P
Where
Q is the amount of heat,
m is the mass of the leg portion,
c is the specific heat capacity of the leg,
ΔT is the temperature difference,
P is the power given by the lamp.
Now we need to find the amount of heat.
The formula to calculate the heat energy is given below:
Q = m × c × ΔT
Thus, the amount of heat energy required to raise the temperature of the leg is given by:
Q = (0.24 kg) × (3500 J / kg °C) × (1.9 °C)
= 1.592 kJ
Thus, the time taken to raise the temperature of the leg is given by:
t = ΔT × (m × c) / P
= (1.9 °C) × [(0.24 kg) × (3500 J / kg °C)] / (2.64 × 10¹ W)
t = 3.13 × 10¹ s
Therefore, the values are:
(a) Number 4.33 × 10^-6 Units W/m²
(b) Number 2.64 × 10¹ Units W
(c) Number 3.13 × 10¹ Units s.
Learn more about the average intensity:
brainly.com/question/29526985
#SPJ11