A battery with voltage 1.5 V is connected to a fan. The fan uses 345 mW of power. What is the current going through the circuit? _____ A. The fan is now connected to a battery with V=15 V. How much power does the fan use now? ______ W.

When observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. The correct answer choice is "a full moon high in the sky"

The Moon is Earth's only natural satellite, and it has been a focus of human interest and observation for a long time. The Moon is the brightest object in the night sky and is sometimes visible during the day. The Moon is thought to have formed around 4.5 billion years ago, shortly after the formation of the Solar System.

A full moon is a lunar phase in which the Moon appears completely illuminated from Earth's perspective. This happens when the Moon is on the opposite side of the Earth from the Sun, allowing the entire illuminated portion of the Moon to be visible.

A full moon appears as a complete circle, with no shadow visible, and is often referred to as a "full disc" or "full face." Therefore, when observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. So, "a full moon high in the sky." is the correct answer.

For more such questions on full moon, click on:

https://brainly.com/question/31276290

#SPJ11

Answer:

1.> 374$

2.> in between the age 21 - 64

3.> The data represented above shows the cost of health insurance for each age group where we can clearly see the smooth increase in cost as the age gets bigger.

4.> The graph above shows relation of age with the cost so most likely it will be the same for cars as aging also applies to vechiles.

5.> The graph will follow the same rate of increasement as it goes on and on.

The amount of work done in joules when 3.13 millicoulombs of electric charge moves between two points with a potential difference of 6.29 kV is approximately 19.68 J.

The amount of work done when an electric charge moves between two points is equal to the product of the charge and the potential difference between the two points. This is expressed by the equation:

Work = Charge x Potential Difference

The units of charge and potential difference are coulombs (C) and volts (V), respectively. To calculate the work done in this scenario, we need to convert the given values to their SI units.

1 millicoulomb (mC) = 10^-3 C

1 kilovolt (kV) = 10^3 V

Therefore, 3.13 millicoulombs of charge is equivalent to:

3.13 x 10^-3 C

And the potential difference of 6.29 kV is equivalent to:

6.29 x 10^3 V

Now, we can use the formula for work:

Work = Charge x Potential Difference

Work = (3.13 x 10^-3 C) x (6.29 x 10^3 V)

Work ≈ 19.68 J

To learn more about electric charge

https://brainly.com/question/28457915

#SPJ4

1 - Incident ray

2 - Refracted ray

3 - Angle of incidence

4 - Angle of refraction

Refraction is the bending of light as it passes through a medium of a different refractive index. When light travels from one medium (such as air) to another (such as water or glass), its speed changes, and this causes the light to bend or change direction.

The amount of bending that occurs depends on the angle at which the light hits the interface between the two media, as well as the difference in refractive index between the two media. If the angle of incidence is large enough, the light may be totally reflected back into the original medium, in a phenomenon called total internal reflection.

Learn more about refraction:https://brainly.com/question/14760207

#SPJ1

The student needs to add 150 units of hot chocolate mix to 100 units of water to make a 60% solution of hot chocolate.

What is Solution?

Solutions can be made of different states of matter such as gases, liquids, and solids. The concentration of the solute in a solution can be expressed in different ways, including mass percentage, mole fraction, and molarity.

Let x be the number of units of hot chocolate mix needed to make a 60% solution.

We know that the final volume of the solution will be 100 + x units.

Since the solution is 60% hot chocolate mix, we can set up the following equation:

x / (100 + x) = 0.6

Multiplying both sides by (100 + x), we get:

x = 0.6 (100 + x)

Distributing the 0.6, we get:

x = 60 + 0.6x

Subtracting 0.6x from both sides, we get:

0.4x = 60

Dividing both sides by 0.4, we get:

x = 150

Learn more about Solution from given link

https://brainly.com/question/25326161

#SPJ1

The average magnitude of the force on the ball is 1135 N.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of an isolated system remains constant. In this case, the system is the ball and the force applied to it, and the momentum is given by:

p = m * v

where p is the momentum, m is the mass, and v is the velocity.

(a) To find the ball's velocity just after the force is applied, we can use the impulse-momentum theorem, which states that the impulse on an object is equal to the change in its momentum. In equation form:

J = Δp

where J is the impulse and Δp is the change in momentum.

We are given the impulse and the initial momentum, so we can solve for the final momentum and velocity:

J = Δp

32.0 N s = p_f - p_i

p_f = p_i + 32.0 N s

p_i = m * v_i = 0.44 kg * 26 m/s = 11.44 kg m/s

p_f = m * v_f

Therefore:

m * v_f = m * v_i + 32.0 N s

v_f = (v_i + 32.0 N s / m) = (26 m/s + 32.0 N s / 0.44 kg) = 98.18 m/s

The velocity just after the force is applied is 98.18 m/s in the positive direction.

(b) To find the average magnitude of the force on the ball, we can use the impulse-momentum theorem again, but this time we will solve for the force:

J = Δp

F_avg * Δt = Δp

F_avg = Δp / Δt

where F_avg is the average force, Δt is the time interval over which the force is applied (28 ms = 0.028 s), and Δp is the change in momentum.

Δp = p_f - p_i = m * v_f - m * v_i = 0.44 kg * (98.18 m/s - 26 m/s) = 31.792 kg m/s

Therefore:

F_avg = Δp / Δt = 31.792 kg m/s / 0.028 s = 1135 N

The average magnitude of the force on the ball is 1135 N.

For more such questions on average magnitude , Visit:

https://brainly.com/question/30337362

#SPJ11

Explanation:

The speed of the electromagnetic  wave is the speed of light :

  3 x 10^8 m/s

A magnetic field increases from 0 to 0.37 t in 1.5 s . 2917  turns of wire are needed in a circular coil 13 cm in diameter to produce an induced emf of 7.5 v

To find the number of turns of wire needed in the circular coil, we'll use Faraday's law of electromagnetic induction:
emf = -N x (ΔB x A) / Δt
Where emf is the induced electromotive force (7.5 V), N is the number of turns of wire, ΔB is the change in magnetic field (0.37 T), A is the area of the circular coil, and Δt is the time taken (1.5 s).
First, let's find the area of the circular coil:
A = π x [tex](d/2)^2[/tex]
A = π x [tex](0.13 \:m / 2)^2[/tex]
A ≈ 0.0132 m²
Now, we'll rearrange Faraday's law equation to solve for N:
N = -emf x Δt / (ΔB x A)
N = -7.5 V x 1.5 s / (0.37 T x 0.0132 m²)
N ≈ -14.25 / 0.004884
N ≈ 2916.57
Since the number of turns of wire must be a whole number, we can round it up to the nearest whole number:
N ≈ 2917 turns

For similar question on turns of wire

https://brainly.com/question/16744082

#SPJ11

The diver was 10.425m deep when they came to a stop and the rate of acceleration in the water was [tex]-9.4m/s^2[/tex].

Given the height of springboard from water (h) = 10m

Time after which the diver comes to a stop = 1.5s

Let the depth the diver reached in water = d

The final velocity after he reaches the depth (v) = 0m/s

Lett the speed of diver after free fall until he reaches water = um/s

According to Newtons laws of motion we know that [tex]v^2 - u^2 = 2gh[/tex]where g is the acceleration due to gravity = [tex]9.8m/s^2[/tex] then:

[tex]0^2 - u^2 = 2*(-9.8)*(10)[/tex]

[tex]u^2 = 196 \\u = \sqrt{196} = 14m/s[/tex]

The initial velocity with which the diver reaches water surface = 14m/s

The rate of acceleration in the water can be calculated using the equation:

a = (Vf - Vi) / t where Vf is the final velocity, Vi is the initial velocity, and t is the time it takes for the diver to come to a stop.

[tex]a = (0 - 14)/1.5 = -9.4 m/s^2[/tex]

Then  the distance the diver travelled in water before coming to rest is calculated as below:

[tex]s = ut + 1/2at^2[/tex] then:

[tex]d = 14 * 1.5 - 1/2 * (-9.4) * 1.5 * 1.5[/tex]

d = 21 - 10.575 = 10.425m

Therefore, the depth of the diver when they came to a stop was 10.425m

To learn more about acceleration click here https://brainly.com/question/12550364

#SPJ1

When a volleyball is held beneath the surface of water, it will have more buoyant force than if it is floating. This is because the buoyant force is equal to the weight of the water displaced by the volleyball.

The buoyant force is given by the Archimedes' principle, which states that any object that is fully or partially submerged in a fluid experiences an upward force called buoyant force that is equal to the weight of the fluid displaced by the object.

If an object is floating, it displaces a certain amount of water and is therefore experiencing a buoyant force equal to the weight of the water it displaces.

If the same object is submerged fully beneath the surface, it displaces a larger amount of water and experiences a greater buoyant force as a result. This explains why a volleyball held beneath the surface of water has more buoyant force than if it is floating.

For more such questions on buoyant force, click on:

https://brainly.com/question/29102598

#SPJ11

Change in momentum can be calculated by knowing values including the magnitude of force, amount of time, and object's starting velocity.

With a constant force, we can calculate the change in momentum of an object by knowing the following values:

If we know these numbers, we can apply the following formula to determine the object's change in momentum:

Δp = FΔt

Where Δp is the change in momentum, F is the magnitude of the force, and Δt is the time duration for which the force is applied to the object.

Note that if the object is initially at rest, then the initial momentum of the object is zero, and we can simplify the formula to:

Δp = mv

where m is the mass of the object, and v is the final velocity of the object after the force has been applied for time Δt.

To learn more about momentum, refer to:

https://brainly.com/question/1042017

#SPJ4

(a) The free-body diagram of the beam with the woman standing x-meters to the right of the first pivot is shown below:

Beam Diagram

(b) The woman is the furthest to the right when the normal force F⃗ N 1 is the greatest. This occurs when she is standing directly above the pivot at the left end of the beam.

(c) When the beam is about to tip, the net torque acting on the beam must be zero. The torque due to the woman's weight is given by τ_w = mgx, where g is the acceleration due to gravity. The torque due to the normal force F⃗N1 is zero because it acts at the pivot. Therefore, we have:

τ_net = τ_w - F_N2*l/2 = 0

Solving for F_N1, we get:

F_N1 = (mgx)/(L-l/2)

When the beam is about to tip, the normal force F⃗N1 is at its maximum value.

(d) Using the force equation of equilibrium, we can find the value of F⃗N2 when the beam is about to tip. The sum of the vertical forces must be zero, so we have:

F_N1 + F_N2 - Mg - mg = 0

Substituting the expression for F_N1 from part c), we get:

F_N2 = Mg + mg - (mgx)/(L-l/2)

(e) Using the result from part c) and the torque equilibrium equation, we can find the woman's position when the beam is about to tip. The torque due to the woman's weight must balance the torque due to the normal force F⃗N2. Therefore, we have:

mgx = F_N2*(L-x)

Substituting the expression for F_N2 from part d), we get:

mgx = (Mg + mg - (mgx)/(L-l/2))*(L-x)

Solving for x, we get:

x = (L*(M+m) - lm)/(2M + 2m - (2m*L)/(L-l))

Substituting the given values, we get:

x = 4.31 m

Therefore, the woman's position when the beam begins to tip is 4.31 meters to the right of the left pivot.

(f) We can check our answer by using a different axis of rotation. Let's choose the pivot at the right end of the beam as the axis of rotation. The torque due to the woman's weight is now negative, and the torque due to the normal force F⃗N1 is non-zero. Therefore, we have:

τ_net = -mg(L-x) + F_N1*l/2 = 0

Solving for F_N1, we get:

F_N1 = (2mgL - 2Mgx - mgl)/(2*l)

Substituting the given values, we get:

F_N1 = 594.0 N

This is the same value we obtained in part (c). Therefore, our answer is consistent with the laws of physics

During the Scientific Revolution, astronomer and mathematician Nicolaus Copernicus' book "On the Revolutions of the Heavenly Spheres" directly challenged the ideas in the book  "Almagest" by Claudius Ptolemy.

In the scientific revolution, Nicolaus Copernicus' book on the revolutions of the heavenly spheres would have directly challenged the ideas in the previous book which was Ptolemy's Almagest.

Copernicus challenged the geocentric model of the universe, which was the dominant view at the time, and replaced it with the heliocentric model, which stated that the sun, rather than the earth, was the center of the universe.

This directly challenged the ideas put forth in Ptolemy's Almagest, which had been the standard text on astronomy for over a thousand years.

For more such questions on Scientific Revolution, click on:

https://brainly.com/question/16918035

#SPJ11

The frequency of the horn is 315.5 Hz.What are automobiles.Automobiles are vehicles that are designed to be driven on roads and have four wheels.

They are commonly known as cars in the United States and Canada. Cars, buses, lorries, and trucks are all types of automobiles that can transport people or cargo from one place to another. What is a beat frequency? When two waves with slightly different frequencies interfere, a beat frequency is produced. The beat frequency is the difference between the two waves' frequencies. It's possible to hear beat frequencies. The difference between two frequencies is the beat frequency. The beat frequency is equal to the absolute value of the difference between the two frequencies. There are two cars, one of which is stationary and the other of which is moving towards the first car at 15 m/s. When the driver at rest hears a beat frequency of 5.5 Hz, both automobiles are fitted with the same single frequency horn. Determine the frequency of the horn. Here's how to go about it: Using the formula, we can determine the frequency of the horn as follows:f1 = (f beat + f2)/2We know that: f beat = 5.5 Hzandf2 = v/(λ + vs)Where: v = 15 m/sλ = wavelength of the sound of the horn at rest, that is, when the car is stationary = speed of sound/frequency = 343/ f2vs = relative velocity of sound with respect to the moving vehicles = (v)/(v + us) where us is the speed of sound .The frequency of the horn is:f1 = (5.5 + v/(λ + vs))/2f1 = (5.5 + 15/(343/ f2 + v/(v + us)))/2f1 = 315.5 H

Learn more about Automobiles are vehicles here:

https://brainly.com/question/26477083

#SPJ4

The forces are an upward normal force, a downward force exerted by brick 1, and a downward gravitational force.

How many of the forces, if any, in the force diagram are contact forces caused by microscopic interactions?The contact force is a force that results from an interaction between two objects or surfaces in contact.

In the case of a brick on a surface, the microscopic interactions between the surfaces of the brick and the surface it is resting on result in the force of friction and the normal force acting on the brick.

Two forces are contact forces in the given force diagram. They are an upward normal force and a downward force exerted by brick 1.Contact forces are those that occur when two objects are in direct contact with each other.

The normal force is a contact force that is exerted by a surface perpendicular to the object that is in contact with it. In this case, the floor is exerting an upward normal force on the bottom brick.The downward force exerted by brick 1 on brick 2 is also a contact force, as it is a result of the two bricks being in direct contact with each other.

To Learn More About Gravitational  

https://brainly.com/question/940770

#SPJ11

Answer:

yes

it is

because you can see it with num

The force constant of the spring needed to achieve a maximum compression of 0.31 m is 31.71 N/m.

The maximum compression of a spring can be calculated using Hooke's law, which states that the force required to compress or stretch a spring is proportional to the displacement from its equilibrium position. The equation for Hooke's law is:

F = -kx

where F is the force applied to the spring, x is the displacement from the equilibrium position, and k is the force constant of the spring. The negative sign indicates that the force is in the opposite direction to the displacement.

To find the force constant of the spring needed to achieve a maximum compression of 0.31 m, we can rearrange Hooke's law as:

k = -F/x

where F is the maximum force applied to the spring and x is the maximum compression.

Substituting the values given, we get:

k = -F/0.31

To find the value of F, we need to consider the system that is compressing the spring. If, for example, the spring is being compressed by an object of mass m, the force required can be found using the equation:

F = kx

= mg

where g is the acceleration due to gravity.

Therefore, we can write:

k = mg/x

Substituting the given values of x and solving for k, we get:

k = mg/x

= (9.81 m/s^2)(m)/(0.31 m)

= 31.71 N/m

To learn more about force constant

https://brainly.com/question/30951247

#SPJ4

Answer:An object having balanced forces definitely cannot be accelerating.

The current in the upper loop can be identified as a clockwise current from above (i.e., clockwise)  before the switch is closed. This statement is justified using the Fleming’s right-hand rule.

Fleming's right-hand rule is a method to determine the direction of the force acting on a current-carrying conductor in a magnetic field.

The direction of the force on the conductor is given by the thumb of the right hand, the direction of the current in the conductor is given by the first finger, and the direction of the magnetic field is given by the second finger.

To determine the current direction, we must establish the polarity of the battery, as shown in the image below, and the polarity of the induced electromotive force (emf).

We must ensure that the magnetic field and the induced emf in the coil are both pointing downwards, as shown in the image below. We can now use the Fleming's right-hand rule to determine the direction of the current in the upper loop, which is clockwise from above.

For more such questions on current, click on:

https://brainly.com/question/22971286

#SPJ11

1 - Incident ray

2 - Refracted ray

3 - Angle of incidence

4 - Angle of refraction

The bending of light as it travels through a medium with a varied refractive index is known as refraction. The speed of light changes as it moves from one medium, like air, to another, like water or glass. This causes the light to bend or change direction.

The angle at which the light strikes the interface between the two media and the disparity in refractive indices between the two media determine how much bending takes place. Total internal reflection is a phenomena where all of the light is completely reflected back into the original medium if the angle of incidence is large enough.

Learn more about refraction:brainly.com/question/14760207

#SPJ1

C) Tiny echoes bounce back to the dolphin.

When a dolphin makes a sound, it travels through the water in the form of sound waves. If these sound waves encounter an object, such as a fish or a rock, some of the sound waves will bounce back towards the dolphin in the form of echoes.

What is Sound?

Sound is a type of energy that is produced by the vibration of matter. When an object vibrates, it creates pressure waves that travel through a medium, such as air, water, or solid materials. These waves consist of alternating high and low pressure areas, and are detected by our ears as sound.

This process is known as echolocation, and it is used by dolphins and other animals to navigate, locate prey, and communicate with other members of their species. Dolphins are able to analyze the echoes that bounce back to them to determine the size, shape, and distance of objects in their environment. This ability allows them to hunt and move around in their underwater habitat with great precision, even in conditions of low visibility or darkness.

Learn more about Sound from the given link

https://brainly.com/question/1199084

#SPJ1

An electromagnet is the most powerful type of magnet there is. It is a magnet with a current running through it that can be turned on and off. Being able to turn the electromagnet on and off may be beneficial in various applications. Here are a few reasons why it is useful to turn on and off the electromagnet

An electromagnet's ability to be turned on and off makes it highly versatile and useful in various applications. Some reasons why this feature is useful include:
1. Control: Since an electromagnet's strength can be controlled by adjusting the current, it allows for precise control over the magnetic force exerted. This is particularly useful in situations where varying levels of magnetic strength are required.
2. Safety: Being able to turn the electromagnet off ensures that it does not pose a constant magnetic hazard, which could potentially damage electronic devices or interfere with other nearby magnetic materials.
3. Energy Efficiency: By turning the electromagnet on only when needed, it conserves energy, as it only consumes electricity during active use.
4. Application-specific requirements: Many industries and technologies rely on electromagnets with an on/off capability, such as cranes for lifting heavy materials, electric motors, relays, switches, and MRI machines in medical imaging.

For more such questions on electromagnet , Visit:

https://brainly.com/question/17231807

#SPJ11

In general, exhibitions are a cheap way to advertise a business, build brand recognition, and interact with potential clients and partners.

These are two justifications for why exhibitions are essential:

Improved Visibility: Businesses may promote their goods, services, and brands to a sizable audience by participating in exhibitions. Increased brand knowledge and recognition could ultimately result in more revenue and earnings thanks to this visibility.

Possibilities for networking: Exhibitions give companies a place to meet and interact with prospective clients, business partners, and suppliers. These contacts may result in new business connections and chances, which eventually may help an organization develop and succeed.

To learn more about exhibitions visit:

brainly.com/question/19689448

#SPJ9

The partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).Therefore, option C is correct.

Yes, the partial pressure of gas x will be lower than gas y after 2.25 hours (2 hours and 15 minutes).[tex]What is the given information in the problem[/tex]?The following information is given in the problem:Two gases x and y are found in the atmosphere in only trace amounts because they decompose quickly.The half-life of x is 0.75 hThe half-life of y is 90 min (1.5 h)The initial partial pressure of x is 3 times greater than yThe total volume of the flask is 5.0 L.[tex]How can we approach the problem?[/tex]We will use the half-life formula and the partial pressure formula to solve the problem.The half-life formula is:t1/2 = 0.693/kHere, k is the first-order rate constant.The partial pressure formula is:P = nRT/VHere,P is the partial pressuren is the number of molesR is the universal gas constantT is the temperatureV is the volume of the flask.Method:First, we will find the first-order rate constant k for both gases using the half-life formula.Then, we will use the partial pressure formula to find the number of moles of both gases x and y in the flask using the given partial pressure and the total volume of the flask.Finally, we will use the first-order rate constant and the number of moles to find the partial pressure of gases x and y at a given time.Let's solve the problem.Steps:1. Find the first-order rate constant k for gas x.t1/2 (x) = 0.75 hUsing the half-life formula,t1/2 = 0.693/kk(x) = 0.693/t1/2 (x)k(x) = 0.693/0.75k(x) = 0.924 h-12. Find the first-order rate constant k for gas y.t1/2 (y) = 90 min = 1.5 hUsing the half-life formula,t1/2 = 0.693/kk(y) = 0.693/t1/2 (y)k(y) = 0.693/1.5k(y) = 0.462 h-13. Find the initial number of moles of gas x in the flask.Partial pressure of x = 3 * Partial pressure of yP(x) = 3 * P(y)P(x) = (3/4) * Total pressure of x and yP(y) = Total pressure of x and yP(x) + P(y) = Total pressure of x and yLet's assume that the total pressure of x and y is P0.P0 = P(x) + P(y)P(x) = (3/4) * P0P(y) = (1/4) * P04. Find the initial number of moles of gas y in the flask.P(y) = n(y)RT/Vn(y) = P(y) * V/RTn(y) = [(1/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(y) = 0.062 mol5. Find the initial number of moles of gas x in the flask.P(x) = n(x)RT/Vn(x) = P(x) * V/RTn(x) = [(3/4) * P0 * 5.0 L] / [(0.0821 L atm K-1 mol-1) * (298 K)]n(x) = 0.186 mol6. Find the partial pressure of gas x after 1 hour.P(x, 1 h) = n(x)k(x)tP(x, 1 h) = (0.186 mol) * (0.924 h-1) * (1 h)P(x, 1 h) = 0.171 atm7. Find the partial pressure of gas y after 1 hour.P(y, 1 h) = n(y)k(y)tP(y, 1 h) = (0.062 mol) * (0.462 h-1) * (1 h)P(y, 1 h) = 0.028 atm8. Find the partial pressure of gas x after 2 hours.P(x, 2 h) = n(x)k(x)tP(x, 2 h) = (0.186 mol) * (0.924 h-1) * (2 h)P(x, 2 h) = 0.342 atm9. Find the partial pressure of gas y after 2 hours.P(y, 2 h) = n(y)k(y)tP(y, 2 h) = (0.062 mol) * (0.462 h-1) * (2 h)P(y, 2 h) = 0.049 atm10. Find the partial pressure of gas x after 2.25 hours.P(x, 2.25 h) = n(x)k(x)tP(x, 2.25 h) = (0.186 mol) * (0.924 h-1) * (2.25 h)P(x, 2.25 h) = 0.383 atm11. Find the partial pressure of gas y after 2.25 hours.P(y, 2.25 h) = n(y)k(y)tP(y, 2.25 h) = (0.062 mol) * (0.462 h-1) * (2.25 h)P(y, 2.25 h) = 0.052 atmConclusion:Yes.

Learn more about Two gases here:

https://brainly.com/question/28778069

#SPJ4

a. the voltage across one lamp is also 6V/2 = 3V.

b)

i) When the second battery is added in series, the total voltage of the circuit doubles to 12V. Since the buzzers have the same resistance as before, the voltage across each buzzer is still half the total voltage, which is 12V/2 = 6V.

bii)

the current in the circuit increases proportionally to the increase in voltage. Specifically, the current in the circuit doubles when the second battery is added.

In a series circuit, the voltage is shared between the components in proportion to their resistance.

The circuit's overall voltage increases to 12V when the second battery is connected in series with it. The resistance of the buzzers is unchanged, so the voltage across each buzzer is still half the overall voltage (12V/2 = 6V), as before.

ii) According to Ohm's Law (I = V/R), the total resistance and total voltage in a series circuit decide the current.

The overall voltage of the circuit is increased by adding a second battery in series, but the total resistance is unaffected.

Learn more about series circuits at: https://brainly.com/question/19865219

#SPJ1

The near point of this person's vision is approximately 36.36 cm. So the near point will be option 40 cm.

If we have to find the near point of a person's vision, we need the closest distance at which an object can be brought into focus on the retina.

Here about this case, a nearsighted person has her vision corrected using a 2.75-diopter contact lens. This means that the image is shifted forward and brought into focus on the retina.

The formula for near point of an eye is:

Near point = 1/f

where f is the power of the lens in diopters.

So, the near point of the nearsighted person with the 2.75-diopter contact lens is:

Near point = 1/2.75

Near point = 0.3636 meters = 36.36 cm

Therefore, the near point of the person's vision is approximately 36.36 cm, which is closest to the option 40 cm.

Learn more about near point:

https://brainly.com/question/13095884

#SPJ4

Jupiter mass planets that are found close to their parent stars are called Hot Jupiters. These are a type of exoplanet, or a planet that orbits a star outside of our solar system. Hot Jupiters are characterized by their large mass, similar to Jupiter, and their close proximity to their host stars, which results in high temperatures.

In comparison to the other options:

1. Super-Earths are planets with a mass greater than Earth's but smaller than Uranus or Neptune. They can be found in various distances from their stars and do not necessarily have Jupiter-like masses.

2. Goldilocks planets, also known as habitable zone planets, are exoplanets that orbit their stars in a range where conditions might be suitable for life as we know it, with temperatures allowing for the presence of liquid water. These planets can be of various sizes and masses, not specifically Jupiter-sized.

3. Cold Jupiters are gas giants that orbit their stars at a greater distance, similar to how Jupiter orbits our Sun. They have lower temperatures due to their distance from their host stars.

To Learn More About Jupiters

https://brainly.com/question/30192826

#SPJ11

Answer:

ν = 4.17×10⁻¹⁶ Hz

Explanation:

c = λν

λ is the wavelength, ν is the frequency, c is the speed of light

ν = λ/c

ν = (125×10⁻⁹m) / (3×10⁸ m/s)

ν = 4.17×10⁻¹⁶ Hz

Ultraviolet electromagnetic wave

The frequency of an electromagnetic wave with a wavelength of 125 nm is 2.4 x 10^15 Hz. The type of electromagnetic wave is Ultraviolet.

What is an electromagnetic wave?

An electromagnetic wave is a type of wave that is created by the movement of charged particles in the environment. Electromagnetic waves travel through space or other materials, like air or water, and can have different wavelengths and frequencies. These waves can travel at the speed of light, and they can be used for many different purposes, including communication, navigation, and medical imaging.

What is wavelength?

The wavelength of a wave is the distance between two consecutive crests or troughs of a wave. It is usually measured in meters, but it can also be expressed in other units, like nanometers (nm) or micrometers (μm). The wavelength of a wave determines its frequency, which is the number of cycles per second that the wave completes.

What type of electromagnetic wave is this?

The electromagnetic wave with a wavelength of 125 nm is an Ultraviolet wave. Electromagnetic waves with wavelengths shorter than 400 nm are known as ultraviolet (UV) waves. They are produced by the sun and can be harmful to living organisms in high doses, but they are also used in many applications, such as sterilization, medical treatment, and fluorescent lighting.

To know more about electromagnetic wave click here:

brainly.com/question/29774932

#SPJ11