a battery with an emf of 25.10 v delivers a constant current of 2.50 ma to an appliance. how much work (in j) does the battery do in two minutes?

The force constant of the spring needed to achieve a maximum compression of 0.31 m is 31.71 N/m.

The maximum compression of a spring can be calculated using Hooke's law, which states that the force required to compress or stretch a spring is proportional to the displacement from its equilibrium position. The equation for Hooke's law is:

F = -kx

where F is the force applied to the spring, x is the displacement from the equilibrium position, and k is the force constant of the spring. The negative sign indicates that the force is in the opposite direction to the displacement.

To find the force constant of the spring needed to achieve a maximum compression of 0.31 m, we can rearrange Hooke's law as:

k = -F/x

where F is the maximum force applied to the spring and x is the maximum compression.

Substituting the values given, we get:

k = -F/0.31

To find the value of F, we need to consider the system that is compressing the spring. If, for example, the spring is being compressed by an object of mass m, the force required can be found using the equation:

F = kx

= mg

where g is the acceleration due to gravity.

Therefore, we can write:

k = mg/x

Substituting the given values of x and solving for k, we get:

k = mg/x

= (9.81 m/s^2)(m)/(0.31 m)

= 31.71 N/m

To learn more about force constant

https://brainly.com/question/30951247

#SPJ4

An electromagnet is the most powerful type of magnet there is. It is a magnet with a current running through it that can be turned on and off. Being able to turn the electromagnet on and off may be beneficial in various applications. Here are a few reasons why it is useful to turn on and off the electromagnet

An electromagnet's ability to be turned on and off makes it highly versatile and useful in various applications. Some reasons why this feature is useful include:
1. Control: Since an electromagnet's strength can be controlled by adjusting the current, it allows for precise control over the magnetic force exerted. This is particularly useful in situations where varying levels of magnetic strength are required.
2. Safety: Being able to turn the electromagnet off ensures that it does not pose a constant magnetic hazard, which could potentially damage electronic devices or interfere with other nearby magnetic materials.
3. Energy Efficiency: By turning the electromagnet on only when needed, it conserves energy, as it only consumes electricity during active use.
4. Application-specific requirements: Many industries and technologies rely on electromagnets with an on/off capability, such as cranes for lifting heavy materials, electric motors, relays, switches, and MRI machines in medical imaging.

For more such questions on electromagnet , Visit:

https://brainly.com/question/17231807

#SPJ11

In general, exhibitions are a cheap way to advertise a business, build brand recognition, and interact with potential clients and partners.

These are two justifications for why exhibitions are essential:

Improved Visibility: Businesses may promote their goods, services, and brands to a sizable audience by participating in exhibitions. Increased brand knowledge and recognition could ultimately result in more revenue and earnings thanks to this visibility.

Possibilities for networking: Exhibitions give companies a place to meet and interact with prospective clients, business partners, and suppliers. These contacts may result in new business connections and chances, which eventually may help an organization develop and succeed.

To learn more about exhibitions visit:

brainly.com/question/19689448

#SPJ9

Answer:

The highest frequency electromagnetic waves are microwaves.

Hope This Helps!

Answer: It would take 5 seconds for an object traveling at 12 m/s to go 60 m. Rounded to the nearest whole number, the answer is 5 seconds.

Explanation:

To find the time it would take an object to travel a certain distance at a given speed, we can use the formula:

time = distance / speed

Plugging in the given values, we get:

time = 60 m / 12 m/s

time = 5 seconds

The following terms should be used in your answer: "tangential speed", "m/s 2.00 kg particle 7.2", and "angular speed".

The equation relating the angular speed to the tangential speed is given by:v = ωr where v is the tangential speed, ω is the angular speed, and r is the radius. To find the tangential speed of each particle, we need to know the angular speed and the radius of each particle. The given masses and distances from the x-axis are as follows:4.00 kg particle at 14.4 m from the x-axis 2.00 kg particle at 7.2 m from the x-axis3.00 kg particle at 10.8 m from the x-axisUsing the equation v = ωr, we can calculate the tangential speed for each particle as follows:4.00 kg particle:ω = 2π/8 = π/4 rad/sr = 14.4 tangential speed, v = ωr = (π/4) x 14.4 = 3.6π m/s2.00 kg particle:ω = 2π/4 = π/2 rad/sr = 7.2 tangential speed, v = ωr = (π/2) x 7.2 = 3.6π m/s3.00 kg particle:ω = 2π/6 = π/3 rad/sr = 10.8 tangential speed, v = ωr = (π/3) x 10.8 = 3.6π m/sTherefore, the tangential speed of the 4.00 kg particle is 3.6π m/s, the tangential speed of the 2.00 kg particle is 3.6π m/s, and the tangential speed of the 3.00 kg particle is 3.6π m/s.

learn more about tangential speed here:

https://brainly.com/question/14391529

#SPJ4

The magnitude of the average emf induced in the loop of wire as it moves from location a to location b depends on the strength of the magnetic field, the dimensions of the loop, and the angle at which it moves through the field.

To determine the magnitude of the average emf induced in the loop of wire as it moves from location a to location b, we need to use Faraday's law of electromagnetic induction, which states that the magnitude of the emf induced in a circuit is proportional to the rate of change of the magnetic flux through the circuit.

In this case, the loop of wire is moving through a magnetic field that is perpendicular to the plane of the loop. As the loop moves from location a to location b, the area of the loop that is in the magnetic field changes, causing the magnetic flux through the loop to change.

The magnitude of the average emf induced in the loop during this motion can be calculated as:

emf = ΔΦ/Δt

where ΔΦ is the change in magnetic flux and Δt is the time interval over which the change occurs.

The change in magnetic flux can be calculated as:

ΔΦ = B × ΔA

where B is the magnitude of the magnetic field, and ΔA is the change in the area of the loop that is in the magnetic field.

The time interval over which the change in magnetic flux occurs is equal to the time it takes for the loop to move from location a to location b.

Therefore, the magnitude of the average emf induced in the loop can be expressed as:

emf = B × ΔA/Δt

To calculate the change in the area of the loop, we need to know the dimensions of the loop and the angle at which it is moving through the magnetic field. Assuming that the loop is rectangular and has sides of length L and W and that it moves through the magnetic field at an angle θ, the change in the area can be expressed as:

ΔA = WL × sin(θ)

Substituting this expression into the equation for emf, we get:

emf = B × WL × sin(θ)/Δt

To learn more about magnetic fields

https://brainly.com/question/11514007

#SPJ4

(a) The free-body diagram of the beam with the woman standing x-meters to the right of the first pivot is shown below:

Beam Diagram

(b) The woman is the furthest to the right when the normal force F⃗ N 1 is the greatest. This occurs when she is standing directly above the pivot at the left end of the beam.

(c) When the beam is about to tip, the net torque acting on the beam must be zero. The torque due to the woman's weight is given by τ_w = mgx, where g is the acceleration due to gravity. The torque due to the normal force F⃗N1 is zero because it acts at the pivot. Therefore, we have:

τ_net = τ_w - F_N2*l/2 = 0

Solving for F_N1, we get:

F_N1 = (mgx)/(L-l/2)

When the beam is about to tip, the normal force F⃗N1 is at its maximum value.

(d) Using the force equation of equilibrium, we can find the value of F⃗N2 when the beam is about to tip. The sum of the vertical forces must be zero, so we have:

F_N1 + F_N2 - Mg - mg = 0

Substituting the expression for F_N1 from part c), we get:

F_N2 = Mg + mg - (mgx)/(L-l/2)

(e) Using the result from part c) and the torque equilibrium equation, we can find the woman's position when the beam is about to tip. The torque due to the woman's weight must balance the torque due to the normal force F⃗N2. Therefore, we have:

mgx = F_N2*(L-x)

Substituting the expression for F_N2 from part d), we get:

mgx = (Mg + mg - (mgx)/(L-l/2))*(L-x)

Solving for x, we get:

x = (L*(M+m) - lm)/(2M + 2m - (2m*L)/(L-l))

Substituting the given values, we get:

x = 4.31 m

Therefore, the woman's position when the beam begins to tip is 4.31 meters to the right of the left pivot.

(f) We can check our answer by using a different axis of rotation. Let's choose the pivot at the right end of the beam as the axis of rotation. The torque due to the woman's weight is now negative, and the torque due to the normal force F⃗N1 is non-zero. Therefore, we have:

τ_net = -mg(L-x) + F_N1*l/2 = 0

Solving for F_N1, we get:

F_N1 = (2mgL - 2Mgx - mgl)/(2*l)

Substituting the given values, we get:

F_N1 = 594.0 N

This is the same value we obtained in part (c). Therefore, our answer is consistent with the laws of physics

Newton's universal law of gravitation explains the motion of the moon and other planets, and implies Kepler's laws. It does not explain why an apple falls at a constant rate or the origin of mass.

Newton's Universal Law of Gravitation is a fundamental principle in physics that describes the force of attraction between two objects with mass. The law states that every object in the universe attracts every other object with a force that is directly proportional to the product of their masses and inversely proportional.

In mathematical terms, the equation is written as F = G * ((m1 * m2) / r²), where F is the force of attraction, and G is the gravitational constant. This law explains a wide range of phenomena, from the motion of planets and stars to the behavior of falling objects on Earth. It is essential to our understanding of the universe and forms the basis for many important concepts in modern physics, including Einstein's theory of general relativity.

To know more about Newton's universal law visit here:

brainly.com/question/3159150

#SPJ4

Answer:

The correct answer is 1) 19.

Explanation:

The speed of the electromagnetic  wave is the speed of light :

  3 x 10^8 m/s

The amount of work done in joules when 3.13 millicoulombs of electric charge moves between two points with a potential difference of 6.29 kV is approximately 19.68 J.

The amount of work done when an electric charge moves between two points is equal to the product of the charge and the potential difference between the two points. This is expressed by the equation:

Work = Charge x Potential Difference

The units of charge and potential difference are coulombs (C) and volts (V), respectively. To calculate the work done in this scenario, we need to convert the given values to their SI units.

1 millicoulomb (mC) = 10^-3 C

1 kilovolt (kV) = 10^3 V

Therefore, 3.13 millicoulombs of charge is equivalent to:

3.13 x 10^-3 C

And the potential difference of 6.29 kV is equivalent to:

6.29 x 10^3 V

Now, we can use the formula for work:

Work = Charge x Potential Difference

Work = (3.13 x 10^-3 C) x (6.29 x 10^3 V)

Work ≈ 19.68 J

To learn more about electric charge

https://brainly.com/question/28457915

#SPJ4

Answer:

Radio wave :

The wavelength of an electromagnetic wave is measured to be 600 m.

Explanation:

All remain are given in attachment!

The supplied vector can be categorised as a 2-dimensional unit vector because it is in the x-y plane's first quadrant and has equal components in the i and j directions.

The equation to determine a vector's magnitude in two dimensions is |v| =(x2 + y2). (x, y). The Pythagorean theorem is the foundation of this formula. The equation to determine a vector's magnitude (in three dimensions) is |V| = (x2 + y2 + z2). (x, y, z).

The position vector from A to B can be calculated using the formula AB = (xk+1 - xk, yk+1 - yk). Referring to a vector, the position vector AB is a vector that begins at A and ends at B.

To know more about vector visit:-

https://brainly.com/question/31289115

#SPJ1

Answer:

yes

it is

because you can see it with num

C) Tiny echoes bounce back to the dolphin.

When a dolphin makes a sound, it travels through the water in the form of sound waves. If these sound waves encounter an object, such as a fish or a rock, some of the sound waves will bounce back towards the dolphin in the form of echoes.

What is Sound?

Sound is a type of energy that is produced by the vibration of matter. When an object vibrates, it creates pressure waves that travel through a medium, such as air, water, or solid materials. These waves consist of alternating high and low pressure areas, and are detected by our ears as sound.

This process is known as echolocation, and it is used by dolphins and other animals to navigate, locate prey, and communicate with other members of their species. Dolphins are able to analyze the echoes that bounce back to them to determine the size, shape, and distance of objects in their environment. This ability allows them to hunt and move around in their underwater habitat with great precision, even in conditions of low visibility or darkness.

Learn more about Sound from the given link

https://brainly.com/question/1199084

#SPJ1

Tuesday will require more effort from Ratan since the dry surface will make it difficult to overcome the force of friction between the box and the surface through the same distance.

The smoothness or roughness of the surfaces affects frictional force. Force decreases with a smooth surface or increases with a rough surface, respectively. Friction is significantly lower on smooth and wet surfaces compared to dry or rough ones.

Because of the increase in surface roughness, making the surface dry or rubbery increases friction. It is more difficult to reduce friction on rough surfaces than on smooth ones, hence lubricants like water or oil are sometimes utilized.

To learn more about friction visit:

brainly.com/question/13000653

#SPJ1

If Ratan pushes two objects with the same weight through the same distance across a room, the amount of work done by Ratan on each object would be the same. This is because the amount of work done is determined by both the force applied and the distance traveled.

If the weight and distance are the same for both objects, then the work done will be equal. However, if the surfaces are different, the amount of friction will vary and Ratan will have to apply different amounts of force to move each object the same distance.
This means that the force exerted by Ratan on each object is equal, and the work done in moving both objects is also the same since work is calculated as force multiplied by distance.

For more questions on: distance

https://brainly.com/question/26550516

#SPJ11

When a volleyball is held beneath the surface of water, it will have more buoyant force than if it is floating. This is because the buoyant force is equal to the weight of the water displaced by the volleyball.

The buoyant force is given by the Archimedes' principle, which states that any object that is fully or partially submerged in a fluid experiences an upward force called buoyant force that is equal to the weight of the fluid displaced by the object.

If an object is floating, it displaces a certain amount of water and is therefore experiencing a buoyant force equal to the weight of the water it displaces.

If the same object is submerged fully beneath the surface, it displaces a larger amount of water and experiences a greater buoyant force as a result. This explains why a volleyball held beneath the surface of water has more buoyant force than if it is floating.

For more such questions on buoyant force, click on:

https://brainly.com/question/29102598

#SPJ11

The energy of a photon with a wavelength of 590 nm is [tex]3.36 * 10^-19[/tex]

The energy of a photon can be calculated using the equation:

E = hc/λ

where E is the energy of the photon, h is Planck's constant [tex](6.626 * 10^-34 J.s)[/tex], c is the speed of light[tex](3.00 * 10^8 m/s)[/tex], and λ is the wavelength of the photon in meters.

To convert 590 nm (nanometers) to meters, we can use the conversion factor:

[tex]1 nm = 1 * 10^-9 m[/tex]

So, [tex]590 nm = 590 * 10^-9 m[/tex]

Plugging these values into the equation, we get:

E = [tex](6.626 * 10^-34 J.s * 3.00 * 10^8 m/s) / (590 * 10^-9 m)[/tex]

E = [tex]3.36 * 10^-19 J[/tex]

Therefore, the energy of a photon with a wavelength of 590 nm is [tex]3.36 * 10^-19[/tex]

Learn about wavelength here https://brainly.com/question/24452579

#SPJ1

The average magnitude of the force on the ball is 1135 N.

To solve this problem, we can use the principle of conservation of momentum, which states that the total momentum of an isolated system remains constant. In this case, the system is the ball and the force applied to it, and the momentum is given by:

p = m * v

where p is the momentum, m is the mass, and v is the velocity.

(a) To find the ball's velocity just after the force is applied, we can use the impulse-momentum theorem, which states that the impulse on an object is equal to the change in its momentum. In equation form:

J = Δp

where J is the impulse and Δp is the change in momentum.

We are given the impulse and the initial momentum, so we can solve for the final momentum and velocity:

J = Δp

32.0 N s = p_f - p_i

p_f = p_i + 32.0 N s

p_i = m * v_i = 0.44 kg * 26 m/s = 11.44 kg m/s

p_f = m * v_f

Therefore:

m * v_f = m * v_i + 32.0 N s

v_f = (v_i + 32.0 N s / m) = (26 m/s + 32.0 N s / 0.44 kg) = 98.18 m/s

The velocity just after the force is applied is 98.18 m/s in the positive direction.

(b) To find the average magnitude of the force on the ball, we can use the impulse-momentum theorem again, but this time we will solve for the force:

J = Δp

F_avg * Δt = Δp

F_avg = Δp / Δt

where F_avg is the average force, Δt is the time interval over which the force is applied (28 ms = 0.028 s), and Δp is the change in momentum.

Δp = p_f - p_i = m * v_f - m * v_i = 0.44 kg * (98.18 m/s - 26 m/s) = 31.792 kg m/s

Therefore:

F_avg = Δp / Δt = 31.792 kg m/s / 0.028 s = 1135 N

The average magnitude of the force on the ball is 1135 N.

For more such questions on average magnitude , Visit:

https://brainly.com/question/30337362

#SPJ11

Answer:

The energy stored in a cloud due to separation of charges that causes a lightning strike can be estimated using the equation:

E = (1/2) * C * V^2

where E is the energy stored, C is the capacitance of the cloud, and V is the potential difference between the cloud and the ground.

Assuming that the capacitance of the cloud is 10 microfarads and the potential difference between the cloud and the ground is 100 million volts, the energy stored in the cloud is:

E = (1/2) * 10^-5 F * (10^8 V)^2 = 5*10^13 J

Now, if 12.5 coulombs of charge is transferred from the cloud to the ground, the energy dissipated can be calculated as:

W = V * Q = V * (12.5 C)

where W is the work done, Q is the charge transferred, and V is the potential difference between the cloud and the ground during the lightning strike.

Assuming that the potential difference remains constant at 100 million volts, the work done or energy dissipated is:

W = (10^8 V) * (12.5 C) = 1.25 * 10^10 J

Therefore, the fraction of stored energy dissipated is:

Fraction = (energy dissipated) / (energy stored)

Fraction = (1.25 * 10^10 J) / (5*10^13 J)

Fraction = 0.00025 or 0.025%

Thus, only a very small fraction of the energy stored in the cloud is dissipated during a lightning strike.

As per the given statement, if 12.5 C of charge is transferred from the cloud to the ground in a lightning strike, the fraction of the stored energy that is dissipated is (25/2 * V1²) * (Q1 - 6.25) / Q1².

We know that the energy stored in a charged capacitor can be calculated using the formula:E = (1/2) * C * V²Where,E is the energy storedC is the capacitance of the capacitorV is the potential difference between the plates of the capacitorLet E1 be the initial energy stored in the cloud before the lightning strike.And E2 be the energy stored in the cloud after the lightning strike.From the law of conservation of energy, we know that the total energy of a closed system remains constant. Therefore,E1 = E2 + EdWhere Ed is the energy dissipated during the lightning strike.Let the capacitance of the cloud be C.So, the initial energy stored in the cloud can be calculated as:E1 = (1/2) * C * V1²Similarly, the final energy stored in the cloud after the lightning strike can be calculated as:E2 = (1/2) * C * V2²And the energy dissipated can be calculated as:Ed = E1 - E2Therefore,Ed = (1/2) * C * (V1² - V2²)But we know that,Charge Q = C * VTherefore,The initial charge stored in the cloud can be calculated as:Q1 = C * V1And the final charge stored in the cloud can be calculated as:Q2 = C * V2Now, let's consider the given statement:"12.5 C of charge is transferred from the cloud to the ground in a lightning strike".So, the final charge stored in the cloud can be written as:Q2 = Q1 - 12.5We need to find the fraction of energy dissipated.Using the above expressions for Ed and Q2, we get:Ed = (1/2) * C * [(Q1/C)² - ((Q1 - 12.5)/C)²]Ed = (1/2C) * [Q1² - (Q1 - 12.5)²]Ed = (1/2C) * [(Q1² - Q1² + 25Q1 - 156.25)]Ed = (25/2C) * (Q1 - 6.25)Ed/Q1 = (25/2C) * (1 - 6.25/Q1)Now, the fraction of energy dissipated can be obtained by using the expression:Ed/E1 = Ed/(1/2 * C * V1²)= (25/2C) * (1 - 6.25/Q1) / (1/2 * C * V1²)= (25/2 * V1²) * (1 - 6.25/Q1) / Q1= (25/2 * V1²) * (Q1 - 6.25) / Q1²Hence, the fraction of energy dissipated is (25/2 * V1²) * (Q1 - 6.25) / Q1².

To know more about lightning strike click here:

brainly.com/question/15733465

#SPJ11

1 - Incident ray

2 - Refracted ray

3 - Angle of incidence

4 - Angle of refraction

Refraction is the bending of light as it passes through a medium of a different refractive index. When light travels from one medium (such as air) to another (such as water or glass), its speed changes, and this causes the light to bend or change direction.

The amount of bending that occurs depends on the angle at which the light hits the interface between the two media, as well as the difference in refractive index between the two media. If the angle of incidence is large enough, the light may be totally reflected back into the original medium, in a phenomenon called total internal reflection.

Learn more about refraction:https://brainly.com/question/14760207

#SPJ1

Answer:An object having balanced forces definitely cannot be accelerating.

a. the voltage across one lamp is also 6V/2 = 3V.

b)

i) When the second battery is added in series, the total voltage of the circuit doubles to 12V. Since the buzzers have the same resistance as before, the voltage across each buzzer is still half the total voltage, which is 12V/2 = 6V.

bii)

the current in the circuit increases proportionally to the increase in voltage. Specifically, the current in the circuit doubles when the second battery is added.

In a series circuit, the voltage is shared between the components in proportion to their resistance.

The circuit's overall voltage increases to 12V when the second battery is connected in series with it. The resistance of the buzzers is unchanged, so the voltage across each buzzer is still half the overall voltage (12V/2 = 6V), as before.

ii) According to Ohm's Law (I = V/R), the total resistance and total voltage in a series circuit decide the current.

The overall voltage of the circuit is increased by adding a second battery in series, but the total resistance is unaffected.

Learn more about series circuits at: https://brainly.com/question/19865219

#SPJ1

The forces are an upward normal force, a downward force exerted by brick 1, and a downward gravitational force.

How many of the forces, if any, in the force diagram are contact forces caused by microscopic interactions?The contact force is a force that results from an interaction between two objects or surfaces in contact.

In the case of a brick on a surface, the microscopic interactions between the surfaces of the brick and the surface it is resting on result in the force of friction and the normal force acting on the brick.

Two forces are contact forces in the given force diagram. They are an upward normal force and a downward force exerted by brick 1.Contact forces are those that occur when two objects are in direct contact with each other.

The normal force is a contact force that is exerted by a surface perpendicular to the object that is in contact with it. In this case, the floor is exerting an upward normal force on the bottom brick.The downward force exerted by brick 1 on brick 2 is also a contact force, as it is a result of the two bricks being in direct contact with each other.

To Learn More About Gravitational  

https://brainly.com/question/940770

#SPJ11

When observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. The correct answer choice is "a full moon high in the sky"

The Moon is Earth's only natural satellite, and it has been a focus of human interest and observation for a long time. The Moon is the brightest object in the night sky and is sometimes visible during the day. The Moon is thought to have formed around 4.5 billion years ago, shortly after the formation of the Solar System.

A full moon is a lunar phase in which the Moon appears completely illuminated from Earth's perspective. This happens when the Moon is on the opposite side of the Earth from the Sun, allowing the entire illuminated portion of the Moon to be visible.

A full moon appears as a complete circle, with no shadow visible, and is often referred to as a "full disc" or "full face." Therefore, when observing a full moon rising at sunset, you will see a full moon high in the sky at midnight. So, "a full moon high in the sky." is the correct answer.

For more such questions on full moon, click on:

https://brainly.com/question/31276290

#SPJ11

if a constant force is applied to an object, causing the object to accelerate at 5.00 m/s2, the acceleration will remain at 5.00 m/s2 unless there is a change in the force applied or the object's mass.

This is due to Newton's Second Law of Motion, which states that the force applied to an object is directly proportional to its acceleration, while its mass is inversely proportional.

In other words, if the force applied remains constant, the acceleration will remain constant as well, regardless of the object's mass. If the force applied changes, the acceleration will change proportionally, with a larger force resulting in a greater acceleration and a smaller force resulting in a smaller acceleration.

Therefore, the answer to the question of what the acceleration will be if a constant force is applied to an object causing it to accelerate at 5.00 m/s2 is that it will remain at 5.00 m/s2 unless there is a change in the force applied or the object's mass.

Learn more about Newton's Second Law of Motion here:

https://brainly.com/question/13447525

#SPJ11

When turning at 490 RPM, the generator produces an EMF of 18.7 V.

When a generator produces 33.0 V while turning at 860 rev/min, the emf the generator produces when turning at 490 rev/min is 18.8 V.

The equation relating EMF with angular velocity is as follows:EMF=BAwN EMF = BAwN EMF = BAwN Where,B is the strength of the magnetic field A is the area of the coilw is the angular velocityN is the number of turns in the coil It can also be expressed as EMF = k × w EMF = k × w where k is the constant that depends on the strength of the magnetic field, the area of the coil, and the number of turns in the coil. Therefore, for the generator given, EMF = k × w EMF = k × wIt can be written asEMF1/EMF2=w1/w2 EMF1/EMF2 = w1/w2where EMF1 and w1 are the initial values and EMF2 and w2 are the final values. Substituting the given values, we getEMF1/EMF2=w1/w2 EMF1/EMF2 = w1/w218.8/33 = 490/8600.53333 = 0.56976EMF2 = EMF1/w1/w2 EMF2 = EMF1/w1/w2EMF2 = 33/(0.56976)EMF2 = 18.8Therefore, the emf the generator produces when turning at 490 rev/min is 18.8 V.

To know more about emf click here:

brainly.com/question/29672664

#SPJ11

The value of the mutual force between them is -3.0 x 10^-3 N.

The mutual force between two point charges can be calculated using Coulomb's law, which states that the force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The equation for Coulomb's law is F = k * (q1 * q2) / r^2, where F is the force, k is Coulomb's constant, q1 and q2 are the charges, and r is the distance between the charges.

Plugging in the given values, we get:

F = (9.0 x 10^9 N*m^2/C^2) * [(4.0 x 10^-6 C) * (-8.0 x 10^-6 C)] / (2.4 x 10^-2 m)^2

Simplifying the expression, we get:

F = -3.0 x 10^-3 N

Note that the negative sign indicates that the force is attractive, since the charges have opposite signs.

To know more about charges, here

brainly.com/question/17101884

#SPJ4