a 25.0 ml sample of a saturated caoh2 solution is tritrated with and the equiavence what is the concentration of the hydroxide ion

STP, or standard temperature and pressure, is a set of conditions used for comparing and measuring gases. STP is defined as a temperature of 0°C (273.15 K) and a pressure of 1 atmosphere (atm).

To determine the pressure of 0.6 moles of a gas sample collected at STP conditions, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.

At STP conditions, the temperature T is 0°C or 273.15 K, and the number of moles n is given as 0.6. We also know that the volume V of the gas sample is equal to 22.4 L, which is the molar volume of any gas at STP.

Using these values, we can rearrange the ideal gas law equation to solve for the pressure P:

P = nRT/V

Substituting the known values, we get:

P = (0.6 mol)(0.0821 L·atm/mol·K)(273.15 K) / 22.4 L

P = 1.98 atm

Therefore, the pressure of 0.6 moles of a gas sample collected at STP conditions is 1.98 atm.

To know more about universal gas constant, visit:

https://brainly.com/question/14279790

#SPJ1

The vapor pressure of water at the given temperature is approximately 3.2 kPa.

What is Vapor pressure?

Vapor pressure is the pressure exerted by a vapor in equilibrium with its liquid or solid phase at a given temperature in a closed system. It is a measure of the tendency of a substance to evaporate and depends on the temperature and the intermolecular forces present in the substance.

The vapor pressure of water at 80°C is given as 47.37 kPa. We can use the Clausius-Clapeyron equation to calculate the vapor pressure of water at a different temperature:

ln(P2/P1) = (ΔHvap/R) × (1/T1 - 1/T2)

where P1 and T1 are the vapor pressure and temperature at one point, P2 and T2 are the vapor pressure and temperature at another point, ΔHvap is the enthalpy of vaporization, and R is the gas constant.

Assuming that ΔHvap is constant over the temperature range of interest, we can rearrange the equation as follows:

P2 = P1 × exp[(ΔHvap/R) × (1/T1 - 1/T2)]

We can use the known vapor pressure at 80°C and the given temperature to calculate the vapor pressure at the given temperature:

P1 = 47.37 kPa

T1 = 80°C = 353 K

T2 = given temperature = 25°C = 298 K

R = 8.31 J/mol·K (gas constant for SI units)

The enthalpy of vaporization of water is approximately 40.7 kJ/mol.

Plugging in these values gives:

P2 = 47.37 kPa × exp[(40.7 × 10^3 J/mol / (8.31 J/mol·K)) × (1/353 K - 1/298 K)]

P2 ≈ 3.17 kPa

Rounding this to the correct number of significant digits gives:

P2 ≈ 3.2 kPa

Learn more about Vapor pressure from the given link

https://brainly.com/question/2693029

#SPJ1

Neither of the statements is correct concerning the acid ionization constant, Ka, of iodous acid, HIO₂.

When more HIO₂ is dissolved into water, the pH of the solution will change. This is because HIO₂ is a weak acid and will undergo dissociation in water to produce H⁺ ions and IO₂⁻ ions. The concentration of H⁺ ions will affect the pH of the solution.

Similarly, the value of Ka will also change if more HIO₂ is dissolved into water. Ka is the equilibrium constant for the dissociation of HIO₂ in water. If more HIO₂ is dissolved into water, the equilibrium will shift to the right, resulting in an increase in the concentration of H⁺ ions and IO₂⁻ ions.

This will result in an increase in the value of Ka, as Ka is directly proportional to the concentration of H⁺ ions produced by the dissociation of the weak acid.

Therefore, if more HIO₂ is dissolved into water, both the pH of the solution and the value of Ka will change.

To know more about acid ionization constant here

https://brainly.com/question/4110687

#SPJ4

--The given question is incomplete, the complete question is

"Which of the following is correct concerning the acid ionization constant, ka, of iodous acid, HIO₂? group of answer choices A) if more HIO₂ is dissolved into water, B) the ph of the solution will remain the same. C) if more HIO₂ is dissolved into water, then ka will increase."--

Out of the given options, maple syrup is likely to be the most adhesive due to its high sugar content.

Ability of a substance to stick to any surface is called as adhesion. It depends on various factors such as the chemical composition of the substance, the surface properties of the material, and the environmental conditions like temperature and humidity.

Out of the given options, maple syrup is likely to be the most adhesive due to its high sugar content. Sugars have a high affinity for water, which allows them to form strong hydrogen bonds with surfaces. This property makes maple syrup stickier and more adhesive than other substances.

Ketchup and barbeque sauce also contain sugar, but they typically have a lower sugar content than maple syrup, so they may not be as adhesive. Mustard contains less sugar and is more acidic than the other options, which can reduce its adhesion.

To know more about adhesion, refer

https://brainly.com/question/1451271

#SPJ1

The effect on equilibrium in the following cases: a)the equilibrium would shift towards the product side (right), b) shift towards the product side (right), c) shift towards the reactant side (left), d) shift towards the reactant side (left), e) it would not affect the position of the equilibrium, f) the equilibrium would shift towards the reactant side (left).

Photosynthesis is the process by which plants, algae, and some bacteria convert light energy into chemical energy. During photosynthesis, light energy is absorbed by pigments called chlorophyll, which is located in the chloroplasts of plant cells. This energy is then used to power a series of chemical reactions that convert carbon dioxide and water into glucose (a type of sugar) and oxygen.

The overall equation for photosynthesis is:

6CO₂ + 6H₂O + light energy → C₆H₁₂O₆ + 6O₂

In this equation, carbon dioxide (CO₂) and water (H₂O) are combined in the presence of light energy to produce glucose (C₆H₁₂O₆ ) and oxygen (O₂). The glucose produced by photosynthesis is used by the plant as a source of energy, while the oxygen is released into the atmosphere as a byproduct. Photosynthesis plays a vital role in the Earth's carbon cycle and is responsible for producing the oxygen that is essential for life on Earth.

Learn more about equilibrium here:

https://brainly.com/question/30807709

#SPJ1

The gas inside the balloon exerts extra pressure on its walls as a result of the increased molecular mobility, which causes the balloon to expand.

Pressure: As the temperature of the gas inside the balloon increases, the pressure of the gas also increases.

This is because the gas molecules gain kinetic energy with the increase in temperature, resulting in more frequent and forceful collisions with the walls of the balloon. This leads to an increase in pressure inside the balloon, causing it to expand.

Volume: Due to the increase in pressure inside the balloon, the volume of the gas inside the balloon also increases. The balloon expands and stretches to accommodate the increased volume of the gas.

Temperature: The temperature of the gas inside the balloon also increases as it absorbs heat from the hot water.

However, the rate of increase in temperature may be slower compared to the water temperature due to the heat capacity of the balloon material and the heat transfer rate.

Therefore, This increased molecular motion causes the gas inside the balloon to exert more pressure on the walls of the balloon, resulting in the expansion of the balloon.

Learn more about gas here:

https://brainly.com/question/30888126

#SPJ1

Using the relationship between number of moles, concentration and volume, the amount of sal^2-(aq) transferred to the 10 ml volumetric flask is 6.0 × 10^-6 mol.

Since 0.5 ml of the stock solution was transferred to a 10 ml volumetric flask, the volume of the transferred solution is:

0.5 ml = 0.5 × 10^-3 L = 5.0 × 10^-4 L

To determine the amount of sal^2-(aq) transferred to the 10 ml volumetric flask, we can use the formula:

amount (in moles) = concentration × volume

where concentration is in moles per liter (mol/L) and volume is in liters (L).

The concentration of the stock solution is:

concentration = 1.20 × 10^-3 mol / 0.1 L = 1.20 × 10^-2 mol/L

Using this concentration and the volume of the transferred solution, we can calculate the amount of sal^2-(aq) transferred to the 10 ml volumetric flask:

amount (in moles) = concentration × volume

= 1.20 × 10^-2 mol/L × 5.0 × 10^-4 L

= 6.0 × 10^-6 mol

Learn more on concentration of a solution here;

https://brainly.com/question/5101074

#SPJ1

A covalent bond will be formed when two atoms are each trying to take each others electrons. Option A

A covalent bond is a type of chemical bond that involves the sharing of electrons between atoms. In a covalent bond, two or more atoms share one or more pairs of electrons to achieve a more stable electron configuration.

The strength of a covalent bond depends on a variety of factors, including the number of shared electrons, the distance between the atoms, and the electronegativity of the atoms involved. Covalent bonds are very strong, and they play a crucial role in the formation of molecules and compounds in chemistry.

Learn more about covalent bond:https://brainly.com/question/10777799

#SPJ1

If 1.4555 g of phenyl bromide are involved in the grignard reaction, 9.271 millimoles of phenyl bromide are present

The balanced equation for the Grignard reaction between phenyl bromide and carbon dioxide is:

C₆H₅Br + Mg + CO₂ → C₆H₅COOMgBr

In a chemical reaction, the reactant that is completely consumed in the reaction and limits the amount of product that can be formed is called limiting reagent. To determine the limiting reagent in the reaction, we need to calculate the number of moles of each reactant and compare them to the stoichiometric coefficients in the balanced equation.

The molar mass of phenyl bromide is 157.01 g/mol

And the mass used is 1.4555 g

So, the number of moles of phenyl bromide is:

=1.4555 g / 157.01 g/mol

= 0.009271 mol

=9.271 millimole

Thus, 9.271 millimole of phenyl bromide present in the reaction.

To know more about grignard reaction here

https://brainly.com/question/31356625

#SPJ4

Answer:

8.0 moles

Explanation:

According to the balanced chemical equation, 1 mole of P4O10 reacts with 6 moles of H2O to produce 4 moles of H3PO4. So if 2.0 moles of P4O10 react completely, it will produce 2.0 * 4 = 8.0 moles of H3PO4.

8 moles of H₃PO₄ are formed from2.0 moles of P₄0₁₀.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Moles of P₄O₁₀ = 2mol

Moles of H₂O = 8 mol

From the reaction,

1 mol of P₄O₁₀ forms 4 moles of H₃PO₄

Thus, 2 moles of P₄O₁₀ will form 4 × 2 moles

= 8 moles of H₃PO₄

Therefore, 8 moles of H₃PO₄ are formed from2.0 moles of P₄0₁₀.

Learn more about Moles, here:

https://brainly.com/question/31597231

#SPJ5

The dominant species in solution at the equivalence point of a weak base-strong acid titration is neutral salt. The correct answer is option 5.

A salt is a compound formed from the combination of an acid and a base. The acid and base neutralize each other, resulting in the formation of a neutral salt. The salt's pH will be determined by the strength of the acid and base that made it.A neutral salt is formed when the acid and base are strong or when they are of equal strength.

If the acid is strong and the base is weak, the salt will be acidic, and if the base is strong and the acid is weak, the salt will be basic. At the equivalence point of a weak base-strong acid titration, the dominant species in solution is a neutral salt.

At the endpoint, the pH of the solution will be less than 7 because the acid has been added to the solution. However, at the equivalence point, the acid and base have completely reacted to form a neutral salt, which is neither acidic nor basic. The correct answer is option 5.

To know more about titration refer to-

brainly.com/question/2728613#

#SPJ11

The original concentration of the HCl is 0.100 mol/L. In this problem, we can use the balanced chemical equation for the reaction between calcium hydroxide (Ca (OH)2) and hydrochloric acid (HCl) to determine the amount of moles of HCl required to react completely with Ca (OH)2.

Ca(OH)2 + 2HCl -> CaCl2 + 2H2O

From the equation, we can see that one mole of Ca(OH)2 reacts with 2 moles of HCl. Therefore, the number of moles of HCl required to react completely with the given amount of Ca(OH)2 is:

moles of HCl = (0.250 mol/L) x (0.01000 L) x 2 = 0.005 mol

Since the volume of HCl used is 50.00 ml (0.05000 L) at the equivalence point, we can calculate the original concentration of the HCl as follows:

0.005 mol / 0.05000 L = 0.100 mol/L

To know more about chemical equation:

https://brainly.com/question/28294176

#SPJ4

The characteristics of carbon are:

Carbon has the ability to form strong covalent bonds with other carbon atoms and with other elements such as hydrogen, oxygen, nitrogen, and sulfur. Carbon can form a vast number of compounds due to its ability to bond with other atoms in different configurations, resulting in a diverse range of molecules such as carbohydrates, lipids, proteins, and nucleic acids. Most carbon compounds are covalent and do not dissociate into ions in solution, making them generally nonelectrolytes.

Carbon compounds generally have low melting points due to weak intermolecular forces between molecules. Carbon compounds often have a high reaction rate due to the strong covalent bonds between atoms and the ability of carbon to participate in multiple reactions. Water solubility is not a universal characteristic of carbon compounds, as some are hydrophobic and insoluble in water, while others are hydrophilic and can dissolve in water due to the presence of polar functional groups. Options 1, 3,4,5 and 6 are correct.

The complete question is

Which are characteristics of carbon?

Check all that apply.

To know more about the Carbon, here

https://brainly.com/question/6841018

#SPJ4

Cool the bauxite complex to allow the aluminum hydroxide to precipitate.Dissolve the aluminum oxide in molten cryolite. Separate the aluminum from the oxide by electrolysis in an electrolytic cell.

A trained electrologist inserts a short wire into the hair follicles that are located at the skin's surface. An electric current that exits the follicle and travels down the wire damages the hair root. Damage to the follicles prevents the growth of new hair and causes the existing hair to fall out.

The main industrial procedure for smelting aluminum is called the Hall-Héroult process. It entails dissolving aluminum oxide (alumina), which is most frequently derived from bauxite, the primary ore of aluminum, using the Bayer process, in molten cryolite, and electrolyzing the molten salt bath, usually in a cell that has been specifically designed for the purpose.

Mix the bauxite ore with concentrated sodium hydroxide to form sodium aluminum hydroxide complex.

Heat the Al(OH)3 to drive off water, leaving Al2O3.

Filter out the sodium aluminum hydroxide complex to allow the aluminum hydroxide to precipitate.

Electrolyze the aluminum oxide in the presence of cryolite in an electrolytic cell.

To know more about Electrolyze visit :

brainly.com/question/16889766

#SPJ1

These factors do not increase the solubility of a gas in a liquid, decreased volume of the gas, with pressure and temperature held constant and decreased partial pressure of the gas. Option a and d are correct choices.

Increased partial pressure of the gas: According to Henry's Law, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Therefore, increasing the partial pressure of the gas will increase its solubility in the liquid.

Decreased temperature: As temperature decreases, the solubility of gases in liquids increases. This is because gases are more soluble in colder liquids than in warmer liquids. Therefore, decreasing the temperature will increase the solubility of the gas in the liquid.

Decreased partial pressure of the gas: As mentioned before, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. Therefore, decreasing the partial pressure of the gas will decrease its solubility in the liquid.

Decreased volume of the gas, with pressure and temperature held constant: According to Boyle's Law, the volume of a gas is inversely proportional to its pressure, when temperature is held constant. Therefore, decreasing the volume of the gas while keeping pressure and temperature constant will increase the pressure of the gas. This increase in pressure will tend to decrease the solubility of the gas in the liquid. Hence option a and d are correct.

To know more about solubility, here

brainly.com/question/15560070

#SPJ4

Sick Building Syndrome (SBS) is the phenomenon associated with the buildup of toxic compounds and pollutants in an airtight space.

SBS occurs when occupants of a building experience acute health effects and discomfort due to poor indoor air quality. These symptoms often include headaches, dizziness, fatigue, and irritation of the eyes, nose, and throat. The exact cause of SBS is not always clear, but it is typically linked to a combination of factors such as inadequate ventilation, chemical contaminants from indoor sources, and biological contaminants like mold and bacteria.

In many cases, the symptoms of Sick Building Syndrome are alleviated when individuals leave the affected building, indicating that the issue is related to the indoor environment. To address SBS, building managers can take measures to improve air quality by increasing ventilation, using air filtration systems, and conducting regular maintenance to reduce the presence of contaminants.

It is essential to address Sick Building Syndrome to ensure the well-being and productivity of the building's occupants. Prolonged exposure to poor indoor air quality can lead to chronic health issues and reduced work efficiency. By identifying and mitigating the factors contributing to SBS, building managers can create a healthier and more comfortable indoor environment for everyone.

Know more about Sick Building Syndrome here :

brainly.com/question/18847254

#SPJ11

Among all the substances used, water possesses the strongest intermolecular forces (hydrogen bonds).

Although hydrogen bonds exist in glycerine and methylated spirits as well, they are a little weaker than in water. Due to its nonpolar nature and minimal London dispersion forces, CH4 (methane) would exhibit the smallest intermolecular forces of attraction.

In particular, a subgroup of dipole-dipole interactions known as hydrogen bonding, which takes place when a hydrogen is in close proximity to (attached to) a very electronegative element, is the strongest intermolecular force (namely oxygen, nitrogen, or fluorine).

The relative strength of a material's intermolecular links can be determined by measuring its melting and boiling temperatures; the stronger the intermolecular bonds, the higher the melting temperature of the substance.

To know about intermolecular force

https://brainly.com/question/29773695

#SPJ4

The direction in which the reaction will initially proceed depends on the value of the equilibrium constant (K). If you know K, compare it with the calculated reaction quotient (Q = 20) to determine the direction of the reaction.

To determine the direction in which the reaction will proceed, we need to compare the initial reaction quotient (Q) with the equilibrium constant (K).

Step 1: Calculate the initial concentrations of the reactants and products
Since all substances are mixed in a one-liter container, their concentrations are as follows:
[A] = 0.0010 mol/L
[B] = 5.0 mol/L
[C] = 0.10 mol/L

Step 2: Determine the reaction quotient (Q) using the given concentrations
The reaction quotient is calculated using the formula Q = [C]/([A]*[B]). Plug in the concentrations from step 1:
Q = (0.10) / (0.0010 * 5.0) = 0.10 / 0.005 = 20

Step 3: Compare Q with the equilibrium constant (K)
Without the specific equilibrium constant (K) for the reaction, we cannot provide a definitive answer. However, based on the value of Q, we can infer the following:

- If Q < K, the reaction will proceed forward (to the right) to reach equilibrium.
- If Q > K, the reaction will proceed backward (to the left) to reach equilibrium.
- If Q = K, the reaction is already at equilibrium.

for more such questions on equilibrium constant :

https://brainly.com/question/3159758

#SPJ11

The  ion, Mg2+, has 10 electrons.

When answering questions on Brainly, a question answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and avoid providing extraneous amounts of detail. Typos and irrelevant parts of the question should also be ignored.

Furthermore, the following terms should be used in your answer: Student question: an atomic cation with a charge of has the following electron configuration: what is the chemical symbol for the ion?

how many electrons does the ion have? how many electrons are in the ion?In the given scenario, an atomic cation with a charge of 2+ has the following electron configuration:

1s22s22p6. The chemical symbol for the ion is Mg2+.

This cation, Mg2+, has lost 2 electrons from the neutral atom magnesium (Mg), which has 12 electrons in total.

To learn more about : electrons

https://brainly.com/question/26084288

#SPJ11

Let's assume that Chris uses x milliliters of the 10% acid solution and (100 - x) milliliters of the 30% acid solution. Hence this assumption results in 16% solution of 100 milliliters.

To find the amount of acid in the resulting 16% solution, we can use the following equation:

0.1x + 0.3(100 - x) = 0.16(100)

We have got 0.16(100) and after Simplifying the equation, we will get:

0.1x + 30 - 0.3x = 16

-0.2x = -14

And the final solution would be after doing the above equation is

x = 70

Therefore, Chris needs to use 70 milliliters of the 10% acid solution and (100 - 70) = 30 milliliters of the 30% acid solution to create 100 milliliters of a 16% solution.

Learn more about Acid solutions here:

brainly.com/question/13208021

#SPJ4

For a first-order reaction, the rate of the reaction is proportional to the concentration of the reactant:

Rate = k[A]

Where [A] is the concentration of the reactant and k is the rate constant. The integrated rate law for a first-order reaction is:

ln([A]t/[A]0) = -kt

Where [A]t is the concentration of the reactant at time t and [A]0 is the initial concentration.

To find the first and second half-lives, we need to use the fact that the reaction is 75% complete after 395 s. This means that [A]t/[A]0 = 0.25, and we can substitute this value into the integrated rate law:

ln(0.25) = -k(395)

Solving for k, we get:

k = ln(0.25) / (-395) ≈ 0.00226 s^-1

The first half-life is the time it takes for the concentration of the reactant to decrease to half of its initial value. We can use the integrated rate law to solve for the first half-life:

ln(0.5) = -k(t1/2)

Solving for t1/2, we get:

t1/2 = ln(2) / k ≈ 307 s

The second half-life is the time it takes for the concentration of the reactant to decrease to one-fourth of its initial value. We can use the same equation and substitute [A]t/[A]0 = 0.25 again:

ln(0.25) = -k(t2/2)

Solving for t2/2, we get:

t2/2 = ln(4) / k ≈ 1229 s

Therefore, the first half-life for this reaction is approximately 307 s, and the second half-life is approximately 1229 s.

If methane is compressed in a steady-state adiabatic compressor (87% efficient) to 0.4 mpa, then the required work per mole of methane is 4.04 kJ/mol.

To determine the required work per mole of methane, we can use the following formula:

[tex]W = \frac{(P_2V_2 - P_1V_1)}{n} * \eta[/tex]

Where:

W is the work done per mole of methane in kJ

P₁ is the initial pressure of methane

V₁ is the initial volume of methane

P₂ is the final pressure of methane

V₂ is the final volume of methane

n is the number of moles of methane

η is the efficiency of the compressor

Assuming that the compression process is reversible and adiabatic, we can use the following relationships:

[tex]\frac{P_2}{P_1} = (\frac{V_1}{V_2})^{\gamma}[/tex]

[tex]\frac{T_2}{T_1} = (\frac{V_1}{V_2})^{(\gamma-1)}[/tex]

where:

[tex]\gamma = \frac{C_p}{C_v}[/tex]  is the ratio of specific heats of methane

[tex]C_p[/tex]  is the specific heat at constant pressure

[tex]C_v[/tex]  is the specific heat at constant volume

Since the process is adiabatic, there is no heat transfer (Q = 0) and therefore the compression is reversible, so we can use the above relationships.

Let's assume that we have one mole of methane, and use the ideal gas law to find the initial volume:

[tex]P_1V_1 = nRT_1[/tex]

Where:

R is the gas constant for methane

T₁ is the initial temperature

Assuming standard temperature and pressure (STP) conditions (T₁ = 273.15 K, P₁ = 1 atm), we have:

[tex]V_1 = \frac{nRT_1}{P_1} = \frac{(1)*(8.314 )*(273.15)}{(1 * 101.325)} = 22.414[/tex] L/mol

Next, we can use the relationships for adiabatic compression to find the final volume and temperature:

[tex]\frac{P_2}{P_1} = (\frac{V_1}{V_2})^{\gamma}[/tex]

⇒ [tex]\frac{0.4}{101.325} = (\frac{22.414}{V_2})^{1.31}[/tex]

[tex]V_2 = 6.903[/tex] L/mol

[tex]\frac{T_2}{T_1} = (\frac{V_1}{V_2})^{\gamma-1}[/tex]

[tex]T_2 = T_1 * (\frac{V_1}{V_2})^{\gamma -1}[/tex]

[tex]T_2 = 273.15* (\frac{22.414}{6.903})^{(1.31-1)}[/tex]

[tex]T_2 = 550.1 K[/tex]

Now we can substitute the values into the formula for work:

[tex]W = \frac{(P_2V_2 - P_1V_1)}{n} * \eta[/tex]

[tex]W = \frac{[(0.4*6.903) - (1*22.414)]}{1} * 0.87[/tex]

[tex]W = -4.04[/tex] kJ/mol

the negative sign indicates that work is done on the system (i.e. the compressor does work on the methane). Therefore, the required work per mole of methane is -4.04 kJ/mol

learn more about methane

brainly.com/question/29481150

#SPJ4

The mass of 1.75 x 10²³ atoms of Pb is approximately 60.1 grams. This will took place in a amount of 11 minutes only.

To convert the given number of atoms of Pb to grams, we need to use the molar mass of Pb.

The atomic mass of Pb is 207.2 g/mol (rounded to one decimal place). This means that one mole of Pb atoms weighs 207.2 grams.

To find the mass of 1.75 x 10²³ atoms of Pb, we can use the following steps:

Calculate the number of moles of Pb atoms in 1.75 x 10²³ atoms:

(1.75 x 10²³ atoms) / (6.022 x 10²³ atoms/mol) = 0.290 moles

Convert moles to grams using the molar mass of Pb:

0.290 moles x 207.2 g/mol = 60.1 grams

Therefore, 1.75 x 10²³ atoms of Pb is equivalent to 60.1 grams.

To know more about mass please refer: https://brainly.com/question/15859030

#SPJ1

Question - What is the mass, in grams, of 1.75 x 10^23 atoms of lead (Pb), in due of 11 minutes?

The ph of the given solution is 10.21.

The chemical reaction involved is C₂H₅NH₂ + HCL ==> C₂H₅NH₃⁺ + CL⁻

Given,

initial moles ethylamine = 0.02000 L × 0.1000 mol/L = 0.002000 moles

Moles HCL added = 0.016 L × 0.1000 mol/L = 0.0016 moles

Final moles ethylamine = 0.002000 - 0.0016 = 0.0004 moles

Final moles C₂H₅NH₃⁺ = 0.0016 moles

Final volume = 20ml+ 16.44ml = 36.44ml = 0.03644 L

Final [ C₂H₅NH₃⁺] = 0.0016 mol/ 0.03644 L = 0.04390 M

Final [C₂H₅NH₂] = 0.0004/0.03644 = 0.0109 M

pOH = pKb +㏒ [ C₂H₅NH₃⁺]/[C₂H₅NH₂]

= 3.187 + ㏒ (0.04390/0.0109)

pOH = 3.187 + 0.60503 = 3.7920

pH = 14 - pOH = 14 - 3.793 = 10.21

The ph of the given solution is 10.21.

To learn more about ph,

https://brainly.com/question/31327852

#SPJ4

The amount naoh in ml required to reach the half-equivalence point for this titration is calculated to be 7.08 ml.

The half-equivalence point of a titration is reached when half of the acid has reacted with the base. At this point, the moles of acid and base are equal, and we can use this information to calculate the volume of base needed to reach the half-equivalence point.

First, we can calculate the number of moles of acetic acid present in the solution:

moles of CH3COOH = concentration x volume

moles of CH3COOH = 0.150 mol/L x 0.0236 L

moles of CH3COOH = 0.00354 mol

At the half-equivalence point, half of the acetic acid will have reacted, so the number of moles of acetic acid remaining will be:

moles of CH3COOH remaining = 0.00354 mol / 2

moles of CH3COOH remaining = 0.00177 mol

Since the reaction between acetic acid and sodium hydroxide is 1:1, we will need an equal number of moles of sodium hydroxide to react with the remaining acetic acid:

moles of NaOH needed = 0.00177 mol

Finally, we can use the concentration of sodium hydroxide to calculate the volume needed to provide this many moles:

volume of NaOH = moles of NaOH / concentration of NaOH

volume of NaOH = 0.00177 mol / 0.25 mol/L

volume of NaOH = 0.00708 L

volume of NaOH = 7.08 mL

Therefore, the volume of NaOH needed to reach the half-equivalence point is 7.08 mL.

Learn more about Titration and Moles :

https://brainly.com/question/31229711

#SPJ4

Answer:  Kinetic energy is the energy of an object due to its motion. To calculate the kinetic energy of a baseball when it hits a window, you need to know the mass and velocity of the baseball, as well as the distance it traveled. You can then use Newton's Second Law of Motion (F = m x a) to calculate the acceleration, and then use the equation KE = 0.5 x m x v^2 to find its kinetic energy.

Explanation:

The strength and cohesion of clay rich regolith or soil change with the addition of water as the water reduces the strength of clays. So, option (b) is correct.

Clay is defined as a type of fine grained natural soil material which contains clay minerals. It is the oldest known ceramic material. It comes from the ground that usually in areas where streams or rivers are once flowed. Clay is made from minerals, plant life, and animals like all the ingredients of soil. When we add water in the clay it's pressure breaks up the remains of flora, fauna, and minerals, pulverizing them into fine particles. This is the smallest of the three soil particle sizes, sand, silt and clay. These particles are less than 0.002 millimeters in diameter, feels sticky when wet, and can be formed into a ball.

To learn more about Clay

https://brainly.com/question/29805009

#SPJ4

The correct question is,

How do the strength and cohesion of clay-rich regolith or soil change with the addition of water?

group of answer choices

A. water lowers the strength and cohesion.

B. water reduces the strength of clays but raises the cohesion of the soil.

C. water increases the strength and cohesion.

D. water does not affect the cohesion but lowers the strength.

A student asked about the amount of nickel plated out of a Ni(NO3)2 solution when a current of 5.41 A is passed through it for 1.90 hours.

To determine this, we can use Faraday's laws of electrolysis.

First, we need to find the charge passed through the solution. Charge (Q) can be calculated using the formula Q = I × t, where I is the current and t is the time in seconds. Since 1 hour is equal to 3600 seconds, 1.90 hours is equal to 1.90 × 3600 = 6840 seconds.

Now we can calculate the charge: Q = 5.41 A × 6840 s = 36996 Coulombs.

Next, we need to determine the amount of nickel deposited. The relationship between charge and moles of substance can be described using Faraday's constant (F), which is approximately 96485 Coulombs/mol of electrons. The balanced half-reaction for the reduction of Ni(II) ions is:

Ni(II) + 2e- → Ni(s)

Thus, 2 moles of electrons are needed to deposit 1 mole of nickel. Now we can calculate the moles of nickel

Moles of Ni = (Q × (1 mole Ni / (2 moles e-))) / F = (36996 C × (1 mole Ni / (2 moles e-))) / 96485 C/mol = 0.1918 moles Ni.

Finally, we need to convert moles of nickel to grams. The molar mass of nickel is 58.69 g/mol. So, the mass of nickel deposited is

Mass of Ni = moles of Ni × molar mass = 0.1918 moles × 58.69 g/mol = 11.26 grams.

Therefore, 11.26 grams of nickel is plated out of the Ni(NO3)2 solution when a 5.41 A current is passed through it for 1.90 hours.

Know more about Faraday's laws here:

https://brainly.com/question/17012638

#SPJ11      

The mass of an Avogadro's number of carbon atoms is approximately 12.01 grams, rounded to two decimal places.

An Avogadro's number of any substance contains 6.022 x [tex]10^{23}[/tex] particles (atoms, molecules, or ions). In this case, you have an Avogadro's number of carbon atoms. To find the mass in grams, you need to know the molar mass of carbon.

Carbon has a molar mass of 12.01 grams per mole (g/mol). Since you have one mole of carbon atoms (as defined by Avogadro's number), the mass of these carbon atoms would be:

Mass = (1 mole) x (12.01 g/mol) = 12.01 grams.

Therefore, the mass of an Avogadro's number of carbon atoms is approximately 12.01 grams, rounded to two decimal places.

Know more about Avogadro's number here :

brainly.com/question/1513182

#SPJ11