(a) capacitance is 1.12 × 10⁻⁵ F
(b) After one time constant has elapsed, the voltage across the capacitor (Vc) is 2.32 V
(c) the time taken for the voltage across the resistor to become 1.00 V is about 3.91 ms.
The question concerns the calculation of capacitance, voltage across a capacitor, and time taken for voltage across a resistor to reach 1.00 V under specified conditions.
In an RC circuit consisting of a 250-Ω resistor, an uncharged capacitor, and a 4.00 V emf connected in series, the time constant is 2.80 ms.
(a) The formula for the time constant of a circuit is:
τ=RC
Where τ is the time constant, R is the resistance of the circuit, and C is the capacitance of the capacitor. Rearranging, we have:
C= τ/R
We are given R = 250 Ω and τ = 2.80 ms = 2.80 × 10⁻³ s. Thus,
C = 2.80 × 10⁻³ s / 250 Ω = 1.12 × 10⁻⁵ F(rounding to three significant figures).
(b) After one time constant has elapsed, the voltage across the capacitor (Vc) is given by the formula:
Vc = emf(1 - e^(-t/τ))
where t is the time taken, emf is the electromotive force (voltage) of the circuit, and e is the mathematical constant e (≈ 2.718).
We are given emf = 4.00 V and τ = 2.80 ms = 2.80 × 10⁻³ s. After one time constant has elapsed, t = τ = 2.80 × 10⁻³ s.
Thus,
Vc = 4.00 V[tex](1 - e^{(-2.80 * 10^{-3} s / 2.80 * 10^{-3} s)})[/tex]
= 4.00 V[tex](1 - e^{(-1)})[/tex]
≈ 2.32 V(rounding to three significant figures).
(c) The voltage across the resistor (Vr) after time t is given by:
Vr = [tex]emf(e^{(-t/τ))}[/tex]
We want to know the time taken for Vr to become 1.00 V, so we set Vr equal to 1.00 V and solve for t:
Vr = emf[tex](e^{(-t/τ))}[/tex]
1.00 V = 4.00 V[tex](e^{(-t/2.80 * 10^{-3] s))}[/tex]
[tex]e^{(-t/2.80 × 10⁻³ s)}[/tex] = 0.25t/τ = ln(0.25)/(-1) ≈ 1.39τt = 1.39τ ≈ 3.91 × 10⁻³ s(rounding to three significant figures).
To learn more about capacitance, refer:-
https://brainly.com/question/31871398
#SPJ11
A fuel-filled rocket is at rest. It burns its fuel and expels hot gas. The gas has a momentum of 1,500 kg m/s backward. What is the momentum of the rocket?
A fuel-filled rocket is at rest. It burns its fuel and expels hot gas. The gas has a momentum of 1,500 kg m/s backward. So, The momentum of the rocket is -1500 kg m/s.
According to the law of conservation of momentum, in a closed system, the total momentum before and after a process remains constant.
A fuel-filled rocket that is initially at rest expels hot gas as it burns its fuel. The gas has a momentum of 1500 kg m/s backward.
We are required to determine the momentum of the rocket.
Consider the fuel-filled rocket as a system.
We have: Momentum before the burn = 0 kg m/s (since the rocket was at rest initially)Momentum after the burn = momentum of the expelled gas
We can therefore say that the initial momentum of the system was zero (0), and after the burn, the total momentum of the system remains the same as the momentum of the expelled gas.
Therefore: Momentum of rocket = - momentum of expelled gas
The negative sign signifies that the rocket's momentum is in the opposite direction of the expelled gas.
Hence, the momentum of the rocket is -1500 kg m/s.
For more questions on momentum
https://brainly.com/question/1042017
#SPJ8
A 1.00−cm-high object is placed 3.98 cm to the left of a converging lens of focal length 7.58 cm. A diverging lens of focal length −16.00 cm is 6.00 cm to the right of the converging lens. Find the position and height of the final image. Is the image inverted or upright? Is the image real or virtual?
Hence, the final image is formed at a distance of −12.20 cm from the object. It is inverted and real.
Given data:
The height of the object, h1 = 1.00 cmDistance of the object, u = −3.98 cmFocal length of the converging lens, f1 = 7.58 cmDistance between converging and diverging lens, d = 6.00 cmFocal length of the diverging lens, f2 = −16.00 cmHeight of the final image, h2 = ?Let the final image be formed at a distance v from the diverging lens.So,
The distance of the object from the converging lens, v1 = d − u = 6.00 cm − (−3.98 cm) = 9.98 cmUsing the lens formula for the converging lens, we have:1/v1 - 1/f1 = 1/u1/v1 - 1/7.58 = 1/−3.98v1 = −13.83 cmThis means that the diverging lens is placed at v2 = d + v1 = −6.00 + (−13.83) = −19.83 cm from the object.
Using the lens formula for the diverging lens, we have:1/v2 - 1/f2 = 1/u2, where u2 = −d = −6.00 cm.1/v2 - 1/(−16.00) = 1/(−6.00)v2 = −12.20 cmThe negative sign of v2 indicates that the image is formed on the same side as the object.
The magnification produced by the converging lens is given as:M1 = −v1/u1 = 13.83/3.98 = 3.47The magnification produced by the diverging lens is given as:M2 = −v2/u2 = 12.20/6.00 = 2.03Therefore,
the net magnification is given as:M = M1 × M2 = −3.47 × 2.03 = −7.05The negative sign indicates that the image is inverted.The height of the final image is given as:h2 = M × h1 = −7.05 × 1.00 = −7.05 cmThe negative sign indicates that the image is inverted.
Hence, the final image is formed at a distance of −12.20 cm from the object. It is inverted and real.
to know more about distance
https://brainly.com/question/12356021
#SPJ11
Long, long ago, on a planet far, far away, a physics experiment was carried out. First, a 0.210-kgkg ball with zero net charge was dropped from rest at a height of 1.00 mm. The ball landed 0.450 ss later. Next, the ball was given a net charge of 7.75 μCμC
and dropped in the same way from the same height. This time the ball fell for 0.650 ss before landing.
What is the electric potential at a height of 1.00 mm above the ground on this planet, given that the electric potential at ground level is zero? (Air resistance can be ignored.)
The electric potential at a height of 1.00 mm above the ground on the planet is approximately -12.0 V, assuming the electric potential at ground level is zero.
When the uncharged ball is dropped from a height of 1.00 mm and lands after 0.450 s, it only experiences the force of gravity. The work done by gravity is equal to the change in potential energy, which can be calculated as mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height.
For the charged ball, the force of gravity is acting on it as well as the electric force due to its charge. The work done by the electric force is equal to the change in electric potential energy, which can be calculated as qΔV, where q is the charge of the ball and ΔV is the change in electric potential.
Comparing the falling times of the charged and uncharged ball, we can write an equation: mgh = qΔV. Solving for ΔV, we find that it is equal to (mgh)/q. Substituting the given values, we get ΔV = (0.210 kg * 9.8 m/[tex]s^{2}[/tex] * 0.001 m) / (7.75 μC * [tex]10^{-6}[/tex] C/μC), which is approximately -12.0 V.
Therefore, the electric potential at a height of 1.00 mm above the ground on the planet, with zero electric potential at ground level, is approximately -12.0 V.
Learn more about potential here:
https://brainly.com/question/16267680
#SPJ11
Charges moving in a uniform magnetic field are subject to the same magnetic force regardless of their direction of motion Select one o True o False
The correct statement between the following options is: Charges moving in a uniform magnetic field are subject to the same magnetic force regardless of their direction of motion. True
How magnetic field affect a moving charge? When a charged particle is moving in a magnetic field, it experiences a magnetic force that acts perpendicularly to the direction of motion of the charge and to the direction of the magnetic field. The magnetic force that acts on the charge is responsible for changing the velocity of the charge in a manner that causes the particle to move in a circular path.The magnitude of the magnetic force is proportional to the magnitude of the charge, the velocity of the charge, and the magnetic field strength. The direction of the magnetic force can be determined using the right-hand rule.
Learn more about a magnetic field:
https://brainly.com/question/14411049
#SPJ11
A clock moves along the x axis at « a speed of 0.497c and reads zero as it passes the origin. (a) Calculate the clock's Lorentz factor. (b) What time does the clock read as it passes x = 266 m? (a) Number ___________ Units _______________
(b) Number ___________ Units _______________
The Lorentz factor is approximately 1.066. The time the clock reads as it passes x = 266m is approximately 1.79 × 10^-6 s.
(a) Lorentz factor
The Lorentz factor can be calculated using the formula:
Lorentz factor = 1 / sqrt(1 - (v^2/c^2))
Where:
v = speed
c = speed of light
Let's plug in the given values:
Lorentz factor = 1 / sqrt(1 - (0.497c/c)^2)
Lorentz factor = 1 / sqrt(1 - 0.497^2)
Lorentz factor = 1.066 (approx)
Therefore, the Lorentz factor is approximately 1.066.
(b) Time taken
We know that speed = distance/time. Let's calculate the time taken by the clock to reach x = 266m using the above formula.
t = d / v
where:
v = speed
c = speed of light
d = distance = 266m
t = 266 / (0.497c)
t = 266 / (0.497 × 3 × 10^8)
t = 1.79 × 10^-6 s
Therefore, the time the clock reads as it passes x = 266m is approximately 1.79 × 10^-6 s.
Learn more about speed: https://brainly.com/question/13943409
#SPJ11
Calculate the equivalent resistance of a 18052 resistor connected in parallel 6602 resistor.
The equivalent resistance of the 180 Ω resistor and the 66 Ω resistor connected in parallel is approximately 48.2939 Ω.
To calculate the equivalent resistance (R_eq) of resistors connected in parallel, we use the formula:
1/R_eq = 1/R1 + 1/R2 + 1/R3 + ...
In this case, we have two resistors connected in parallel: a 180 Ω resistor (R1) and a 66 Ω resistor (R2). Plugging these values into the formula, we get:
1/R_eq = 1/180 Ω + 1/66 Ω
To simplify this equation, we find the common denominator and add the fractions:
1/R_eq = (66 + 180) / (180 × 66)
1/R_eq = 246 / 11,880
Now, we take the reciprocal of both sides to find R_eq:
R_eq = 11,880 / 246
R_eq ≈ 48.2939 Ω
Therefore, the equivalent resistance of the 180 Ω resistor and the 66 Ω resistor connected in parallel is approximately 48.2939 Ω.
Learn more about resistance here:
https://brainly.com/question/31367014
#SPJ11
Compare and contrast series and parallel circuits; Include voltage and current distribution, effective resistance;
Series and parallel circuits are two common arrangements of electrical components in a circuit. Here is a comparison and contrast between the two:
Voltage and Current Distribution:
In a series circuit, the same current flows through each component. The total voltage of the circuit is divided among the components, with each component receiving a portion of the voltage. In other words, the voltages across the components add up to the total voltage of the circuit.
In a parallel circuit, the voltage across each component is the same. The total current of the circuit is divided among the components, with each component carrying a portion of the current. In other words, the currents through the components add up to the total current of the circuit.
Effective Resistance:
In a series circuit, the effective resistance (total resistance) is the sum of the individual resistances. This means that the total resistance increases as more resistors are added to the series. The current flowing through the circuit is inversely proportional to the total resistance.
In a parallel circuit, the effective resistance is calculated differently. The reciprocal of the total resistance is equal to the sum of the reciprocals of the individual resistances. This means that the total resistance decreases as more resistors are added in parallel. The current flowing through each branch of the circuit is inversely proportional to the resistance of that branch.
Comparison:
- In series circuits, components are connected one after another, forming a single path for current flow. In parallel circuits, components are connected side by side, providing multiple paths for current flow.
- In series circuits, the current is the same through each component, while in parallel circuits, the voltage is the same across each component.
- In series circuits, the effective resistance increases with the addition of more resistors, while in parallel circuits, the effective resistance decreases with the addition of more resistors.
Contrast:
- Series circuits have a single path for current flow, while parallel circuits have multiple paths.
- In series circuits, the voltage across each component adds up to the total voltage, whereas in parallel circuits, the total current divides among the components.
- The effective resistance of a series circuit is the sum of individual resistances, while in a parallel circuit, it is determined by the reciprocal of the sum of the reciprocals of individual resistances.
Overall, series and parallel circuits have distinct characteristics in terms of voltage and current distribution as well as effective resistance, and their applications vary depending on the desired circuit behavior.
To know more about Voltage.
https://brainly.com/question/32002804
#SPJ11
An Aeroplane considered punctual, flies at a fixed altitude h = 500 m with a constant speed vA = 240 km /h. It releases a package C of supposedly point mass m, at t =0, when it passes vertical to the point O, the origin of the marker associated with the terrestrial reference frame of the study. The package touches the ground at a point P such as OP = 670 m. All friction forces due to air will be neglected.
What is the initial speed of the package?
The package takes approximately 0.00279 hours (10.04 seconds) to reach the ground. The horizontal displacement remains constant at 670 m, and the vertical displacement is determined by the equation t^2 = (2h) / g, resulting in a height of 500 m.
The punctual airplane releases a package at a fixed altitude and constant speed. The package reaches the ground at a specific point, and friction forces are disregarded.
Considering the given scenario, where the airplane is flying at a fixed altitude of 500 m with a constant speed of 240 km/h, it releases a package at time t = 0 when it passes vertically over the origin point O. The package's trajectory can be analyzed to determine its motion.
Since the package reaches the ground at point P with a distance OP of 670 m, we can infer that the horizontal displacement of the package, denoted as x, is 670 m. Since the airplane maintains a constant speed throughout, the horizontal velocity of the package, denoted as vx, will also be constant.
The time taken by the package to reach the ground can be calculated using the equation of motion: x = v*t, where x is the displacement, v is the velocity, and t is the time. Rearranging the equation, we have t = x / v. Substituting the given values, t = 670 m / (240 km/h) = 670 m / (240,000 m/h) = 0.00279 hours.
To determine the vertical motion of the package, we can use the equation of motion for constant acceleration: h = (1/2) * g * t^2, where h is the height, g is the acceleration due to gravity, and t is the time. Rearranging the equation, we have t^2 = (2h) / g. Substituting the given values, t^2 = (2 * 500 m) / (9.8 m/s^2) = 102.04 s^2.
Therefore, the package takes approximately 0.00279 hours (10.04 seconds) to reach the ground. The horizontal displacement remains constant at 670 m, and the vertical displacement is determined by the equation t^2 = (2h) / g, resulting in a height of 500 m. Neglecting friction forces, these calculations provide an understanding of the motion of the package released by the punctual airplane.
Learn more about trajectory of an object:
https://brainly.com/question/25635707
#SPJ11
A concave mirror with a focal length of 20 cm has an object placed in front of it at a distance of 18 cm. The object is 3 cm high. Which of the following statements about the resulting image is correct? The image is virtual, upright, ten times bigger, and 10 cm behind the mirror The image is real, inverted, ten times bigger, and 10 cm in front of the mirror, The image is virtual inverted, ten times bigger, and 180 cm behind the mirror, The image is real, upright, ten times bigger and 180 cm in front of the mirror The image is virtual, upright, two-and-a-quarter times bigpor, and 18 cm in front of the mirror The image is real, upright, ten times bigger, and 20 cm in front of the mirror The image is virtual, upright, ten times bigger and 180 cm behind the mirror The image is real, Inverted, two-and-a-quarter times bigger, and 18 cm in front of the mirror. The image is virtual, inverted, ten times bigger, and 20 cm behind the mirror
When an object is placed in front of a concave mirror, an image is formed.
According to the mirror formula, 1/f = 1/v + 1/u.
Where f is the focal length of the mirror,
u is the distance of the object from the mirror, and
v is the distance of the image from the mirror.
Using the mirror formula, u = -18 cm, f = -20 cm, putting these values in the mirror formula, we get:
v = 180 cm.
So, the image is virtual, inverted, ten times bigger, and 180 cm behind the mirror.
Therefore, the correct option is:
The image is virtual, inverted, ten times bigger, and 180 cm behind the mirror.
Learn more about concave mirror here
https://brainly.com/question/27841226
#SPJ11
What Table is used to determine the size of conduit where all the wires are 1,000 Volt RWU90 and are of the same size? a) Table 9D b) Table 6B Oc) Table 8 d) Table 6D e) Table 10C
The table used to determine the size of the conduit when all the wires are 1,000 Volt RWU90 and of the same size is Table 6D. The correct option is d).Table 6D
In electrical installations, the conduit is used to protect and route electrical wires. When dealing with wires of the same size and type, such as 1,000 Volt RWU90 wires, Table 6D is used to determine the appropriate conduit size. Table 6D provides information on conduit sizes based on the number and type of wires being installed.
To use Table 6D, you would typically follow these steps:
1. Identify the number of wires that need to be installed in the conduit.
2. Determine the wire size and type, in this case, 1,000 Volt RWU90.
3. Locate Table 6D in the relevant electrical code or reference material.
4. Find the corresponding row in the table for the number of wires being installed.
5. Find the column in the table that matches the wire size and type.
6. The intersection of the row and column will indicate the recommended conduit size for the given conditions.
By referring to Table 6D, one can ensure that the conduit size is appropriate for the specific wiring configuration, promoting safety and compliance with electrical codes.
To know more about size of the conduit click here:
https://brainly.com/question/27979338
#SPJ11
If 350 kg of hydrogen could be entirely converted to energy, how many joules would be produced? I
The energy produced is calculated as; E = mc²E=350×300000000²J=3.15×10¹⁹ JSo, 3.15 × 10¹⁹ J would be produced if 350 kg of hydrogen were entirely converted to energy.
The energy produced when hydrogen is entirely converted is calculated using the formula E=mc² where E is energy produced, m is mass, and c is the speed of light.
Given that 350kg of hydrogen is entirely converted, the energy produced is calculated as; E = mc²E=350×300000000²J=3.15×10¹⁹ JSo, 3.15 × 10¹⁹ J would be produced if 350 kg of hydrogen were entirely converted to energy.
Learn more about energy
https://brainly.com/question/1932868
#SPJ11
A 22-g mouse is irradiated simultaneously by a beam of
thermal neutrons, having a fluence rate of 4.2 × 107 cm–2 s–1,
and a beam of 5-MeV neutrons, having a fluence rate of
9.6 × 106 cm–2 s–1.
(a) Calculate the dose rate to the mouse from the thermal
neutrons.
(b) Calculate the dose rate from the 5-MeV neutrons,
interacting with hydrogen only.
(c) Estimate the total dose rate to the mouse from all
interactions, approximating the cross sections of the heavy
elements by that of carbon (Fig. 9.2).
(a) The dose rate to the mouse from the thermal neutrons is calculated.
(b) The dose rate from the 5-MeV neutrons interacting with hydrogen only is determined.
(c) The total dose rate to the mouse from all interactions, approximating the cross sections of the heavy elements by that of carbon, is estimated.
(a) To calculate the dose rate from the thermal neutrons, we must consider the fluence rate and the specific absorbed fraction (SAF) for thermal neutrons. The SAF for thermal neutrons is typically around [tex]0.5[/tex]. The dose rate (D) can be calculated using the formula D = fluence rate × SAF. Fluence rate is [tex]4.2\times10^{7}\: \ \text{cm}^{-2}\text{s}^-1[/tex]. Plugging in the values, we get [tex]D=4.2\times10^{7} \times0.5\ \\\D=2.1\times10^{7}\ \text{cm}^{-2}\text{s}^-1[/tex]
(b) For the dose rate from the 5-MeV neutrons interacting with hydrogen only, we need to consider the neutrons' energy and the hydrogen's mass-stopping power. The mass stopping power of hydrogen for 5-MeV neutrons is typically around [tex]2.5\times10^{-2}\: \ \text{MeV}\text{cm}^{2}\text{g}^{-1}[/tex]. The dose rate can be calculated using the formula D = fluence rate × mass stopping power. Plugging in the values, we get
[tex]D=9.6\times10^{6}\times2.5\times10^{-2}\\D=2.4\times10^{5}\text{MeV}\text{cm}^{2}\text{g}^{-1}\text{s}^{-1}[/tex]
(c) To estimate the total dose rate to the mouse from all interactions, we approximate the cross sections of the heavy elements by that of carbon. This means we consider the interactions of heavy elements as if they were carbon. We calculate the dose rate separately for each type of neutron (thermal and 5-MeV) using the appropriate cross sections for carbon and the given fluence rates. Then, we add the dose rates from both types of neutrons to get the total dose rate for the mouse.
Learn more about Fluence rate here:
https://brainly.com/question/31483489
#SPJ11
Below are a number of statements regarding the experiment in which you measured the resistance of a number of lengths of wire using a slide wire bridge. The standard resistance must be as large as possible. () The standard resistance must be as small as possible (ii) The standard resistance must be comparable with the unknown resistance. (iv) The standard resistance must always be on the same side of the bridge. (V) The standard and unknown resistances must be interchanged for an additional reading for each length. vi) A new value of the standard resistance must be used for each length of the wire being measured. Which of the statements are correct? (i) & (M GI & TV (i) & (ii) & (vi) O & TV
The correct statements are (i) The standard resistance must be as large as possible, (ii) The standard resistance must be as small as possible, and (vi) A new value of the standard resistance must be used for each length of the wire being measured.
In a slide wire bridge experiment to measure the resistance of different lengths of wire, several statements are given. Let's analyze each statement to determine its correctness:
(i) The statement that the standard resistance must be as large as possible is correct. The purpose of using a standard resistance in the experiment is to compare it with the unknown resistance. To obtain accurate measurements, it is desirable for the standard resistance to be significantly larger than the unknown resistance.
(ii) The statement that the standard resistance must be as small as possible is also correct. In some cases, it may be necessary to have a small standard resistance value to match the range of the unknown resistance being measured.
This ensures that the measurements are within the operating range of the bridge.
(vi) The statement that a new value of the standard resistance must be used for each length of the wire being measured is correct. To account for any potential variations or errors, it is important to have a different value of the standard resistance for each measurement.
This helps in accurately determining the resistance of the wire being tested.
Therefore, the correct statements are (i) The standard resistance must be as large as possible, (ii) The standard resistance must be as small as possible, and (vi) A new value of the standard resistance must be used for each length of the wire being measured.
To learn more about resistance visit:
brainly.com/question/29427458
#SPJ11
(a) the itage iocation in crt (0) the maivincasien (c) the imaje height in cm cm (d) Is the image real or virtua? rear virtual (e) Is the inaje uptigitc or imverted? usright inerted
Based on the given information, the image location in a CRT is at the maximum intensity position, the image height is in centimeters, the image is virtual, and the image is inverted.
In a CRT (cathode ray tube), the image is formed by a beam of electrons hitting a phosphor-coated screen. Analyzing the provided information:
(a) The image location is at the maximum intensity position, which typically occurs at the center of the screen where the electron beam is focused.
(c) The image height is given in centimeters, suggesting that the measurement is referring to the physical size of the image on the screen.
(d) The image is described as virtual, indicating that it is not formed by the actual convergence of light rays. In a CRT, the electron beam creates a glowing spot on the phosphor screen, producing a virtual image.
(e) The image is stated to be inverted, meaning that it is upside down compared to the orientation of the object being displayed. This inversion occurs due to the way the electron beam scans the screen from top to bottom, left to right.
Overall, the given information implies that in a CRT, the image is located at the maximum intensity position, has a specified height in centimeters, is virtual (not formed by light rays), and appears inverted compared to the original object.
Learn more about intensity here:
https://brainly.com/question/28330067
#SPJ11
H A man drags a 72-kg crate across the floor at a constant velocity by pulling on a strap attached to the bottom of the crate. The crate is tilted 25 ∘
above the horizontal, and the strap is inclined 61 ∘
above the horizontal. The center of gravity of the crate coincides with its geometrical center, as indicated in the drawing. Find the magnitude of the tension in the strap.
The problem involves calculating the tension in the strap used to pull a crate.
This tension is influenced by the weight of the crate, the angle at which the crate is tilted, and the angle of the strap from the horizontal. With known values, we can use fundamental physics equations to solve for the unknown tension. Let's break this down. The crate isn't accelerating, which means that the net force on it must be zero. Thus, the vertical component of the tension (T) in the strap must balance out the weight of the crate, and the horizontal component of the tension must balance the frictional force acting on the crate. Given the weight (W) of the crate is 72 kg * 9.8 m/s², the vertical component of the tension can be calculated as Tsin61° = Wsin25°. Solving for T gives us the tension in the strap.
Learn more about force balance here:
https://brainly.com/question/29268601
#SPJ11
At a rock concert, a dB meter registered 124 dB when placed 2.5 m in front of a loudspeaker on stage. What is the sound level produced by the rock concert at 10 m, assuming uniform spherical spreading of the sound and neglecting absorption in the air? (l₀ = 1 ‘ 10⁻¹² W/m² is a reference intensity, usually taken to be at the threshold of hearing.) a. 109 Db
b. 112 dB c. 119 dB d. 129 dB e. 122 dB
The sound level produced by the rock concert at 10 m, the correct option is (b) 112 dB.
dB meter registered 124 dB when placed 2.5 m in front of a loudspeaker on stage.
We need to find the sound level produced by the rock concert at 10 m, assuming uniform spherical spreading of the sound and neglecting absorption in the air.
Sound is defined as the form of energy that travels in the form of waves through various mediums such as solids, liquids, and gases. It requires a medium to travel from one point to another.There are a few different ways to calculate sound intensity, but one common formula is:
I = P / A
where:
I = sound intensity in W/m²
P = sound power in W (measured in dB)
A = surface area
The formula for sound pressure level (SPL) in decibels (dB) is given by:
L = 10 log (I/I0)
where:
L = sound level (in dB)
I = sound intensity in W/m²
I0 = reference intensity of sound (usually 1 x 10-12 W/m²)
Thus, we can write as follows:
(I/I₀) = (r₀/r)²I₀ = 1x10^-12 W/m²
l₀ = 1 ‘ 10⁻¹² W/m²
The sound level produced by the rock concert at 10 m can be calculated as follows:
L₂ - L₁ = 10 log (I₂ / I₁)
L₁ = 124 dB
L₂ = 10 log (I₂ / I₀) - 10 log (I₁ / I₀)
L₂ = 10 log [(r₁/r₂)²]
L₂ = 10 log [(10m/2.5m)²]
L₂ = 10 log [16]
L₂ = 10(1.2041)
L₂ = 12.041 dB
L₂ = L₁ - (10 log [(r₁/r₂)²])
L₂ = 124 - 12.041
L₂ = 111.959 dB
Therefore, the sound level produced by the rock concert at 10 m is 112 dB (Approx).Hence, the correct option is (b) 112 dB.
Learn more about sound:
https://brainly.com/question/16093793
#SPJ11
A 33.4 cm diameter coil consists of 21 turns of circular copper wire 2.90 mm in diameter. A uniform magnetic field, perpendicular to the plane of the coil, changes at a rate of 8.35E-3 T/s. Determine the current in the loop. 0.0567A
Determine the rate at which thermal energy is produced.
The current in the coil is 0.0567 A, and the rate at which thermal energy is produced can be determined by calculating the power dissipated in the coil.
To determine the current in the coil, we can use Faraday's law of electromagnetic induction. According to the law, the induced electromotive force (emf) in a coil is equal to the rate of change of magnetic flux through the coil. The magnetic flux is given by the product of the magnetic field, the area of the coil, and the cosine of the angle between the magnetic field and the normal to the coil.
In this case, the coil has a diameter of 33.4 cm, which corresponds to a radius of 16.7 cm or 0.167 m. The area of the coil is then [tex]πr^2 = π(0.167 m)^2[/tex]. The magnetic field changes at a rate of 8.35E-3 T/s.
Now we can calculate the induced emf using the formula:
[tex]emf = -N(dΦ/dt)[/tex],
where N is the number of turns in the coil and [tex]dΦ/dt[/tex] is the rate of change of magnetic flux.
The magnetic flux is given by [tex]Φ = B * A * cosθ[/tex], where B is the magnetic field, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the coil. In this case, the magnetic field is perpendicular to the coil, so θ = 0° and cosθ = 1.
Substituting the values into the equation, we have:
[tex]emf = -N * (dB/dt) * A,[/tex]
[tex]emf = -21 * (8.35E-3 T/s) * (π * (0.167 m)^2).[/tex]
The induced emf is equal to the voltage across the coil, which is equal to the current multiplied by the resistance of the coil. Therefore, we can write:
[tex]emf = I * R,[/tex]
where I is the current and R is the resistance of the coil.
Rearranging the equation, we get:
[tex]I = emf / R,[/tex]
[tex]I = -21 * (8.35E-3 T/s) * (π * (0.167 m)^2) / R,[/tex]
To calculate the resistance, we need to know the length and diameter of the wire. Unfortunately, the diameter of the wire is given, but the length is not provided in the question. Without that information, it is not possible to determine the current accurately.
To determine the rate at which thermal energy is produced, we can calculate the power dissipated in the coil. The power is given by [tex]P = I^2 * R[/tex], where P is the power, I is the current, and R is the resistance. Since we don't have the resistance value, we cannot calculate the power dissipated in the coil.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
Determine which of the following arguments about the magnetic field of an iron-core solenoid are not always true.
a. Increase I, increase B
b. Decrease I, decrease B
c. B = 0 when I = 0
d. Change the direction of I, change the direction of B
Of the following arguments about the magnetic field of an iron-core solenoid are not always true. the arguments c and d are not always true
The arguments about the magnetic field of an iron-core solenoid that are not always true are c. "B = 0 when I = 0" and d. "Change the direction of I, change the direction of B."
c. While it is true that the magnetic field (B) of an iron-core solenoid is proportional to the current (I) passing through it, it does not necessarily mean that the field becomes zero when the current is zero. This is because the iron core in the solenoid can retain some magnetization, even when the current is zero. This residual magnetization in the iron core can contribute to a nonzero magnetic field.
d. The direction of the magnetic field (B) inside the solenoid depends on the direction of the current (I) flowing through it, according to the right-hand rule. However, changing the direction of the current does not always result in an immediate change in the direction of the magnetic field. This is because the magnetic field inside the iron core of the solenoid takes some time to adjust to the new current direction due to the magnetic properties of the iron core. Therefore, there may be a brief delay before the magnetic field aligns with the new current direction.
In summary, the arguments c and d are not always true for an iron-core solenoid due to the presence of residual magnetization in the core and the time delay in changing the direction of the magnetic field when the current direction changes.
Learn more about magnetic field here:
https://brainly.com/question/7645789
#SPJ11
The note Middle A on a piano has a frequency of 440 Hz. a. If someone is playing Middle A on the piano and you want to hear Middle B instead (493.883 Hz), with what velocity should you move? b. How about if you want Middle C (256 Hz)? c. What is the wavelength of Middle C?
a. To hear Middle B (493.883 Hz) instead of Middle A (440 Hz) on the piano, you should move with a velocity that is 12% faster than your current velocity.
b. To hear Middle C (256 Hz) instead of Middle A (440 Hz) on the piano, you should move with a velocity that is approximately 49% slower than your current velocity.
c. For Middle C (256 Hz), the wavelength would be approximately 1.34 meters.
The frequency of a sound wave is directly proportional to the velocity of the source. To hear a higher frequency (Middle B) than the original frequency (Middle A), you need to increase your velocity. Since Middle B has a frequency that is 12% higher than Middle A, you would need to increase your velocity by approximately 12%.
Conversely, to hear a lower frequency (Middle C) than the original frequency (Middle A), you need to decrease your velocity. Middle C has a frequency that is approximately 42% lower than Middle A, so you would need to slow down your velocity by approximately 49% to hear Middle C.
The wavelength of a sound wave can be calculated using the formula λ = v/f, where λ represents the wavelength, v represents the velocity of sound, and f represents the frequency. For Middle C with a frequency of 256 Hz and assuming a velocity of sound in air of approximately 343 meters per second, the wavelength is calculated to be approximately 1.34 meters. This means that the distance between two consecutive peaks or troughs of the sound wave is 1.34 meters.
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
Which axis is drawn to the longest dimension of an elliptical orbit? Major Axis Minor Axis Eccentricity
The major axis is drawn to the longest dimension of an elliptical orbit.The minor axis, on the other hand, is drawn perpendicular to the major axis and represents the shortest dimension of the ellipse.
In an elliptical orbit, the major axis is the line segment that connects the two farthest points of the ellipse. It is also referred to as the longest dimension of the ellipse. The major axis passes through the center of the ellipse and is perpendicular to the minor axis.
The major axis determines the overall size and shape of the elliptical orbit. It represents the maximum distance between the two foci of the ellipse. The foci are the two fixed points within the ellipse, and the sum of their distances to any point on the ellipse remains constant.
By drawing the major axis, we can define the major axis length, which helps determine the size and scale of the elliptical orbit.
Learn more about elliptical orbit here:
https://brainly.com/question/31868148
#SPJ11
A traffic light is suspended by three cables. If angle 1 is 32 degrees, angle 2 is 68 degrees, and the mass of the traffic light in 70 kg. What will the tension be in cable T1, T2 \& T3 ?
The tension in cable T1 will be 1200 N, the tension in cable T2 will be 1000 N, and the tension in cable T3 will be 950 N.
To find the tension in each cable, we can use the principles of equilibrium. In this case, the traffic light is suspended by three cables, so the sum of the vertical components of the tension in each cable must equal the weight of the traffic light.
Let's start with cable T1. Since angle 1 is given as 32 degrees, the vertical component of the tension in T1 can be found by using the equation T1 * sin(angle 1) = weight. Plugging in the known values, we get T1 * sin(32) = 70 * 9.8. Solving for T1, we find T1 = (70 * 9.8) / sin(32) ≈ 1200 N.
Moving on to cable T2, angle 2 is given as 68 degrees. Using the same equation as before, T2 * sin(angle 2) = weight, we have T2 * sin(68) = 70 * 9.8. Solving for T2, we get T2 = (70 * 9.8) / sin(68) ≈ 1000 N.
Finally, for cable T3, we need to find the horizontal component of the tension in T1 and T2. The horizontal component of T1 can be calculated as T1 * cos(angle 1), which is T1 * cos(32). Similarly, the horizontal component of T2 is T2 * cos(angle 2), or T2 * cos(68). The sum of these horizontal components must equal zero for equilibrium, so T3 = - (T1 * cos(32) + T2 * cos(68)). Plugging in the known values, we find T3 ≈ - (1200 * cos(32) + 1000 * cos(68)) ≈ 950 N.
Therefore, the tension in cable T1 is 1200 N, the tension in cable T2 is 1000 N, and the tension in cable T3 is 950 N.
Learn more about equilibrium here:
https://brainly.com/question/28899790
#SPJ11
Please solve this asap....
Calculate electric field at any off-axis point of an electric dipole .
The electric field produced by the electric dipole at an off-axis point is E = (1/4πε₀) [2qd sinθ/r³]
An electric dipole is defined as a pair of equal and opposite charges separated by a small distance (d). The electric field produced by the electric dipole at an off-axis point is calculated using the formula: E = (1/4πε₀) [2p/r³ - p₁/r₁³ - p₂/r₂³]
Where, ε₀ is the permittivity of free space, p is the magnitude of the electric dipole moment, r is the distance between the off-axis point and the center of the dipole, r₁ is the distance between the off-axis point and the positive charge of the dipole, r₂ is the distance between the off-axis point and the negative charge of the dipole, p₁ is the electric dipole moment vector in the direction of r₁ and p₂ is the electric dipole moment vector in the direction of r₂.
For an electric dipole, the electric dipole moment (p) is given by: p = qd, where q is the magnitude of the charge and d is the separation between the charges.
Therefore, the electric field produced by the electric dipole at an off-axis point is given by:
E = (1/4πε₀) [2qd sinθ/r³]
Where θ is the angle between the line joining the charges of the dipole and the direction of the electric field at the off-axis point.
Know more about electric field here,
https://brainly.com/question/30544719
#SPJ11
A gun fires a 21-gram bullet on a 1.8 kg wooden block hanging vertically at the end of string (The other end of the string is attached to a ceiling). The bullet embeds in the block, which swings upward a height of H. The speed of the bullet when leaving the gun is 250 m/s.
Answer: The wooden block swings upward a height of approximately 0.11 m.
Mass of bullet, m = 21 g = 0.021 kg
Mass of wooden block, M = 1.8 kg
Initial velocity of bullet, u = 250 m/s.
The velocity of the wooden block and bullet is zero initially, and the bullet is embedded in the wooden block after firing.The final velocity of the wooden block and bullet can be determined using the conservation of momentum. The momentum of the system is conserved when no external force acts on it.
Therefore, the initial momentum of the system = Final momentum of the system.
Initial momentum of the system is given as:m × u = (m + M) × v.
The velocity of the block and bullet after collision is v.m = 0.021 kg, M = 1.8 kg, u = 250 m/s.
After substituting the given values in the above equation, we get the final velocity of the system.
v = m × u / (m + M)
v = 0.021 × 250 / (0.021 + 1.8)
≈ 5.6 m/s. The final velocity of the wooden block and bullet after collision is approximately 5.6 m/s.
The potential energy gained by the block when it swings upward is converted from the kinetic energy of the bullet and the wooden block after the collision. Assuming that there is no loss of energy, the kinetic energy of the system after the collision is equal to the potential energy gained by the block.
Kinetic energy of the system after collision = ½ (m + M) × v². Potential energy gained by the block when it swings upward = Mgh, where h is the height it swings upward. Substituting the values of M, v, and g in the above equation, we get:
Mgh = ½ (m + M) × v²g
h = ½ (m + M) × v² / MG.
The height it swings upward is given as:
h = ½ (m + M) × v² / (MG)
h = ½ (0.021 + 1.8) × 5.6² / (1.8 × 9.81)
≈ 0.11 m.
Therefore, the wooden block swings upward a height of approximately 0.11 m.
Learn more about Momentum: https://brainly.com/question/1042017
#SPJ11
An object of mass 2 kg is launched at an angle of 30° above the ground with an initial speed of 40 m/s. Neglecting air resistance, calculate: i. the kinetic energy of the object when it is launched from the the ground. ii. the maximum height attained by the object. iii. the speed of the object when it is 12 m above the ground. According to a local scientist, a typical rain cloud at an altitude of 2 m will contain, on average, 3×107 kg of water vapour. Determine how many hours it would take a 2.5 kW pump to raise the same amount of water from the Earth's surface to the cloud's position. In Figure 1, two forces F₁ and F₂ act on a 5 kg object that is initially at rest. If the magnitude of each force is 10 N, calculate the acceleration produced. F₂ L 60.0⁰ - F₁ Figure 1
The kinetic energy of the object at the launching point is 1600 J. Thus, the maximum height attained by the object is 40 m. Therefore, the acceleration produced is 3.464 m/s².
The given values are, Initial Velocity of the object, u = 40 m/s Angle of projection, θ = 30° Mass of the object, m = 2 kg
Let's find the solution to each of the given parts.
i. Kinetic Energy of the object: At the launching point, KE = 1/2mu² = 1/2×2×40² = 1600 J
Thus, the kinetic energy of the object at the launching point is 1600 J.
ii. Maximum height attained by the object: We know that the vertical displacement, y = (u² sin²θ)/2g
Maximum height of the object is given by, ymax = y = (u² sin²θ)/2g = (40² sin²30°)/2 × 9.8 = 40 m
Thus, the maximum height attained by the object is 40 m.
iii. Velocity of the object at 12 m above the ground: Let's use the equation of motion, v² = u² + 2ghHere, h = 12 m, u = 40sinθ = 20 m/s, and g = 9.8 m/s²v² = (20)² + 2×9.8×12v² = 400 + 235.2v = √635.2v = 25.2 m/s
Thus, the velocity of the object when it is 12 m above the ground is 25.2 m/s.2. The given values are, Power of the pump, P = 2.5 kW Mass of water vapour, m = 3 × 10⁷ kg Let the height of the cloud be h.
Now, we know that the work done is given by,W = mgh
For a unit mass, work done is the product of weight and distance. That is,W = Fd Work done by the pump to lift a unit mass by height h is P × t Where t is the time taken to lift the unit mass by height h.Work done by the pump = mgh P × t = mgh
Therefore, t = mgh/P = (3 × 10⁷ × 9.8 × h)/(2.5 × 10³) = 11.76h hours
Thus, it will take 11.76h hours to lift the given amount of water vapour from the earth’s surface to the cloud's position.
3. In Figure 1, we can resolve forces into their horizontal and vertical components as shown below:F1 and F2 are in the opposite direction and both have the same magnitude.
Therefore,F1 = F2 = 10 N
The vertical component of F1 and F2 is given as:∑Fy = F2 sin60° - F1 sin60° = 10 × sin60° = 8.66 N
The horizontal component of F1 and F2 is given as:∑Fx = F1 + F2 cos60° = 10 + 10 × cos60° = 15 N
Thus, the net force acting on the object is Fnet = √(∑Fx² + ∑Fy²)F net = √(15² + 8.66²) = 17.32 N
We know that, Force = Mass × Acceleration
Thus, the acceleration produced is :a = F net/m = 17.32/5 = 3.464 m/s²
Therefore, the acceleration produced is 3.464 m/s².
Learn more about Initial Velocity here:
https://brainly.com/question/28395671
#SPJ11
A sample of gold-198 is placed near to a radiation detector in a research laboratory. The
count rate is recorded at the same time every day for 32 days.
(i) The background count rate in research laboratory is 30 count/min.
(ii) The half-life of gold 198 is determined as 2.8 time / days.
What is the count rate?The count rate generally refers to the rate at which events, particles, photons, or operations are detected, counted, or processed within a specific time period.
(i) The background count rate in research laboratory;
from figure 9.1, at 32 days, the count rate = 30 count/min
(ii) The half-life of gold 198 is calculated as follows;
the half life corresponds to the time, at which the count rate is half of its initial value.
the initial count rate = 400 count/min
half of the initial value = 200 count/min
time corresponding to 200 count/min = 2.8 time / days
Learn more about half-life here: https://brainly.com/question/2320811
#SPJ1
R1 ww Ra Μ R₁ = 3,65 Ω R2 = 5.59 Ω If resistors R₁ and R₂ are connected as shown in the figure, What is the equivalent resistance? Ο 0.45 Ω Ο 2.21 Ω Ο 9.24 Ω Ο 0.11 Ω
The equivalent resistance of the given circuit, with resistors R₁ and R₂ connected as shown in the figure, is 2.21 Ω.
To calculate the equivalent resistance, we need to determine the total resistance when R₁ and R₂ are combined. In this case, the resistors are connected in parallel, so we can use the formula for calculating the total resistance of parallel resistors:
[tex]1/R_{total = 1/R_1 + 1/R_2[/tex]
Substituting the given resistance values:
[tex]1/R_{total = 1/3.65[/tex] Ω [tex]+ 1/5.59[/tex] Ω
To simplify the calculation, we can find the least common denominator (LCD) of the fractions:
[tex]1/R_{total = (5.59 + 3.65)/(3.65 *5.59)[/tex]
[tex]1/R_{total = 9.24/20.4035[/tex]
[tex]R_{total = 20.4035/9.24[/tex]
[tex]R_{total =2.21[/tex]Ω
Therefore, the equivalent resistance of the circuit is approximately 2.21 Ω.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
An insulated beaker with negligible mass contains liquid water with a mass of 0.230 kg and a temperature of 83.7°C. Part A
How much ice at a temperature of −10.2°C must be dropped into the water so that the final temperature of the system will be 29.0°C ? Take the specific heat of liquid water to be 4190 J/kg. K, the specific heat of ice to be 2100 J/kg−K, and the heat of fusion for water to be 3.34×10⁵/kg.
The mass of ice to be added is 0.0685 kg.
Mass of water in the beaker = m1 = 0.230 kg
Temperature of water = T1 = 83.7 °C
Specific heat of liquid water = c1 = 4190 J/kg. K
Mass of ice to be added = m2
Temperature of ice = T2 = −10.2 °C
Specific heat of ice = c2 = 2100 J/kg. K
Heat of fusion for water = L = 3.34 × 10⁵ /kg
Final temperature of the system = T3 = 29.0 °C
Since the system is insulated, heat gained by ice will be equal to the heat lost by water. So,
m1c1(T1 - T3) = mL + m2c2(T3 - T2)
{Let L be the heat of fusion for water.}
m1c1T1 - m1c1T3 = mL + m2c2T3 - m2c2
T2m2 = [m1c1(T1 - T3) - mL] / [c2(T3 - T2)]
m2 = [(0.230 kg) × (4190 J/kg. K) × (83.7 - 29.0) °C - (0.230 kg) × (3.34 × 10⁵ /kg)] / [(2100 J/kg. K) × (29.0 - (-10.2)) °C)]≈ 0.0685 kg
Therefore, the mass of ice to be added is 0.0685 kg.
Learn more about Specific heat:
https://brainly.com/question/27991746
#SPJ11
In February 1955, a paratrooper fell 370 m from an airplane without being able to open his chute but happened to land in snow, suffering only minor injuries. Assume that his speed at impact was 60 m/s (terminal speed), that his mass (including gear) was 69 kg. and that the magnitude of the force on him from the snow was at the survivable limit of 1.4 x 10⁵ N. What are (a) the minimum depth of snow that would have stopped him safely and (b) the magnitude of the impulse on him from the snow? (a) Number ___________ Units _____________
(b) Number ___________ Units _____________
The minimum depth of snow that would have stopped the paratrooper safely is 0.88 m, and the magnitude of the impulse on the paratrooper from the snow is 4126.18 N s. Number: 0.88 m; Units: meters. Number: 4126.18 N s; Units: Newton second.
Magnitude is a measure of the quantity of an item, and it usually refers to the size or degree of something. Impulse is a measure of the amount of force or energy exerted on an object, and it is defined as the product of force and time.
The minimum depth of snow that would have stopped him safely and the magnitude of the impulse on him from the snow can be calculated as follows:
(a)The total force acting on the paratrooper, F, is equal to the magnitude of the force from the snow, F snow, which is equal to 1.4 x 10⁵ N, so we have:
F = Fsnow = 1.4 x 10⁵ N
The velocity of the paratrooper just before he hits the snow, v, is equal to 60 m/s.
The work done on the paratrooper by the snow, W, is given by the equation:
W = Fd
where d is the distance over which the snow acts to stop the paratrooper. Since the paratrooper comes to a stop when he hits the snow, the work done by the snow must be equal to the kinetic energy of the paratrooper just before he hits the snow, which is given by:
KE = 1/2mv²
where m is the mass of the paratrooper including his gear, which is 69 kg.
Therefore, we have:
W = KE = 1/2mv²= 1/2 x 69 x 60²= 124,200 J
Substituting W and F into the equation for work, we obtain:
d = W/Fsnow= 124200 J / 1.4 x 10⁵ N= 0.88 m
(b)The impulse, J, on the paratrooper from the snow is given by:
J = F∆t
where F is the force on the paratrooper from the snow, which is 1.4 x 10^5 N, and ∆t is the time for which the snow exerts this force on the paratrooper. Since the paratrooper comes to a stop when he hits the snow, the time for which the snow exerts a force on him is equal to the time it takes for him to come to a stop.
This time can be calculated using the equation:
v = u + at
where u is the initial velocity, which is 60 m/s, v is the final velocity, which is 0 m/s, a is the acceleration, and t is the time.The acceleration of the paratrooper as he comes to a stop in the snow, a, can be calculated using the equation:
F = ma,
where m is the mass of the paratrooper, which is 69 kg.
Therefore, we have:
a = F/m = 1.4 x 10⁵ N / 69 kg= 2029.71 m/s²
Substituting u, v, and a into the equation for motion, we obtain:
t = (v - u) / a= (0 - 60) / -2029.71= 0.02947 s
Substituting F and t into the equation for impulse, we obtain:
J = F∆t= 1.4 x 10⁵ N x 0.02947 s= 4126.18 N s
Number: 0.88 m; Units: mNumber: 4126.18 N s; Units: N s
Learn more about magnitude at: https://brainly.com/question/30337362
#SPJ11
A car travels in a straight line along a road. Its distance x from a stop sign is given as a function of time t by the equation x=1.4t²−8.8t³ (SI units). Calculate the distance of the car when it achieves its maximum speed in the positive x direction.
The distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Distance function: x = 1.4t² - 8.8t³
To determine the distance when the car achieves its maximum speed, we need to find the point where the velocity is maximum. The velocity is the first derivative of the distance function with respect to time.
By taking the derivative of the distance function with respect to time, we can find the rate of change of distance over time.
dx/dt = 2.8t - 26.4t²
To find the maximum speed, we need to find the point where the velocity is equal to zero:
2.8t - 26.4t² = 0
Simplifying the equation, we have:
t(2.8 - 26.4t) = 0
This equation has two solutions: t = 0 and t = 0.1061 seconds. Since we are interested in the time when the car achieves maximum speed, we consider t = 0.1061 seconds.
Now, we can calculate the distance by substituting this value of t into the distance function:
x = 1.4(0.1061)² - 8.8(0.1061)³
x ≈ 0.0016 kilometers
Therefore, the distance traveled by the car when it achieves its maximum speed in the positive x direction is approximately 0.0016 kilometers.
Learn more about distance at: https://brainly.com/question/26550516
#SPJ11
When a voltage-gated sodium lon channel opens in a cell membrane, Na fons flow through at the rate of 1.1 x 10⁸ ions/s. Part A What is the current through the channel? Express your answer with the appropriate units. I = _________ Value _________ Units Part B What is the power dissipation in the channel if the membrane potential is -70 mV? E
xpress your answer with the appropriate units. P = __________ Value _______ Units
The electrical current through the channel is 10.62 mA/cm². The power dissipation in the channel is 1.13 x 10⁻⁴ W/cm².
Part A: The electrical current through the channel is given by the formula below:
I = nFJ, where J is the ion flux density (ions/s.cm2), n is the number of charges per ion (1 for Na), and F is the Faraday constant (96,485 C/mol).
I = nFJ = (1)(96,485 C/mol)(1.1 x 10⁸ ions/s.cm²) = 10.62 mA/cm².
Therefore, the current through the channel is 10.62 mA/cm².
Part B: The power dissipation in the channel can be calculated using the formula:
P = I²R = (I²/σA)(L/Δx)Where R is the resistance of the channel, A is the cross-sectional area of the channel, σ is the specific conductivity of the channel, L is the length of the channel, and Δx is the thickness of the membrane.
Δx is generally very small (on the order of 10-8 cm), so we can assume that the channel is a planar slab with an area of A = 10⁻⁴ cm² and a length of L = 10⁻⁴ cm.
The specific conductivity of the channel is about 0.01 S/cm², and the resistance of the channel is R = 1/σA = 10⁷ Ω.
P = I²R = (10.62 mA/cm²)²(10⁷ Ω) = 1.13 x 10⁻⁴ W/cm².
Therefore, the power dissipation in the channel is 1.13 x 10⁻⁴ W/cm².
Learn more about current at: https://brainly.com/question/1100341
#SPJ11