A 18-foot ladder leaning against a building forms an 22angle with the side of the building How far is the base of the ladder from the base of the building?

Answers

Answer 1

Answer:

Using the sine function, we have:

sin(angle) = opposite / hypotenuse

sin(22 degrees) = opposite / 18 feet

We can rearrange this equation to solve for the opposite side (height of the building):

opposite = sin(22 degrees) * 18 feet

Calculating this:

opposite ≈ 6.24 feet

Therefore, the base of the ladder from the base of the building is approximately 6.24 feet.


Related Questions

Question #2
Solve for x
2
O Saved 1
4
3
Q
69x + 2
R
70°

Answers

Answer:4 Ex; you take the radius of the area and divide it by the circumference which lead to the division of the answer.

Jessica and Barry squeezed oranges for juice. Jessica squeezed 23
5
cups of juice. Barry made 1
4
cup less than Jessica. Barry estimated that Jessica squeezed about 21
2
cups of juice.

Which is the best estimate for the amount of juice Barry made?

Answers

Jessica squeezed 235 cups of juice, Barry made 221 cups of juice, and the best estimate for the amount of juice Barry made is 198 cups.

Jessica and Barry squeezed oranges for juice. Jessica squeezed 235 cups of juice. Barry made 14 cups less than Jessica. Barry estimated that Jessica squeezed about 212 cups of juice. The best estimate for the amount of juice Barry made is 198 cups.

There are different ways to approach this problem, but one possible method is to use subtraction to find out how much juice Barry actually made, and then compare it to the estimated amount. If Jessica squeezed 235 cups of juice and Barry made 14 cups less, then Barry made 235 - 14 = 221 cups of juice.

This is the exact amount of juice that Barry made, but it may not be a convenient answer if we are looking for an estimate that is close to Barry's estimate of 212 cups of juice. One way to get such an estimate is to round 221 to the nearest ten or hundred. For example, if we round to the nearest ten, we get 220, which is only 8 cups away from Barry's estimate.

Alternatively, if we round to the nearest hundred, we get 200, which is only 12 cups away from Barry's estimate. Therefore, the best estimate for the amount of juice Barry made is 198 cups, which is obtained by rounding down to the nearest ten. This estimate is only 14 cups away from Barry's estimate, and it is also easy to compute mentally.

For more questions on juice

https://brainly.com/question/30436604

#SPJ8

Solve the system of equations. 8 � + 5 � = 24 � = − 4 � ​ 8x+5y=24 y=−4x ​

Answers

The solution to the system of equations is x = 2 and y = -8.

To solve the system of equations, we'll use the substitution method. The given equations are:

Equation 1: 8x + 5y = 24

Equation 2: y = -4x

We'll substitute Equation 2 into Equation 1 to eliminate one variable:

8x + 5(-4x) = 24

8x - 20x = 24   [Distribute the -4]

-12x = 24        [Combine like terms]

x = 24 / -12    [Divide both sides by -12]

x = -2

Now that we have the value of x, we can substitute it back into Equation 2 to find the value of y:

y = -4(-2)

y = 8

Therefore, the solution to the system of equations is x = -2 and y = 8.

However, let's double-check the solution by substituting these values into the original equations:

Equation 1: 8(-2) + 5(8) = 24

-16 + 40 = 24

24 = 24    [LHS = RHS, equation is satisfied]

Equation 2: 8 = -4(-2)

8 = 8       [LHS = RHS, equation is satisfied]

Both equations are satisfied, confirming that x = -2 and y = 8 is indeed the solution to the given system of equations.

For more such questions on equations , click on:

https://brainly.com/question/17145398

#SPJ8

Which of the following functions is graphed below?

Answers

Answer: C

Step-by-step explanation:

the x - 2 means go right 2

the +3 means go up 3

Your firm has the option of making an investment in new software that will cost $172,395 today, but will save the company money over several years. You estimate that the software will
provide the savings shown in the following table over its 5-year life, . Should the firm make this investment if it requires a minimum annual return of 8% on all investments?
The present value of the stream of savings estimates is $ (Round to the nearest dollar)

Answers

The present value of the stream of savings estimates is approximately $200,256.

To determine whether the firm should make the investment in new software, we need to calculate the present value of the stream of savings estimates and compare it to the cost of the software.

The present value (PV) of the savings estimates can be calculated using the formula:

[tex]PV = C1/(1+r)^1 + C2/(1+r)^2 + ... + Cn/(1+r)^n[/tex]

Where C1, C2, ..., Cn represent the savings in each year, r is the minimum annual return required (8% or 0.08), and n is the number of years (5).

Given the savings estimates in the table, we have:

C1 = $35,000

C2 = $45,000

C3 = $50,000

C4 = $55,000

C5 = $60,000

Plugging these values into the present value formula and using the minimum annual return rate of 8% (0.08), we can calculate:

[tex]PV = 35000/(1+0.08)^1 + 45000/(1+0.08)^2 + 50000/(1+0.08)^3 + 55000/(1+0.08)^4 + 60000/(1+0.08)^5[/tex]

Evaluating this expression, we find that the present value of the stream of savings estimates is approximately $200,256.

Since the present value of the savings estimates is greater than the cost of the software ($172,395), the firm should make this investment. The investment is expected to provide a return greater than the minimum required annual return of 8%.

For more such questions on Stream

https://brainly.com/question/30003494

#SPJ8

The present value of the stream of savings estimates is $149,622.

To determine if the firm should make the investment, we need to calculate the present value of the stream of savings estimates and compare it to the initial cost of the software.

The present value (PV) of the savings estimates can be calculated using the formula:

PV = C1/(1+r)¹ + C2/(1+r)² + ... + Cn/(1+r)ⁿ

Where:

PV = Present value

C1, C2, ..., Cn = Cash flows in each period

r = Discount rate (minimum annual return)

Given the savings estimates in the table over a 5-year period and a minimum annual return of 8% (0.08), we can calculate the present value as follows:

PV = $15,000/(1+0.08)¹ + $35,000/(1+0.08)² + $50,000/(1+0.08)³ + $45,000/(1+0.08)⁴ + $40,000/(1+0.08)⁵

PV = $13,888.89 + $30,864.20 + $41,152.46 + $34,682.34 + $29,034.09

PV = $149,621.98 (rounded to the nearest dollar)

The present value of the savings is higher than the initial cost of the software ($172,395), the firm should make this investment if it requires a minimum annual return of 8% on all investments.

For similar questions on savings

https://brainly.com/question/30101466

#SPJ8

What is the formula?
What do the V’s equal?

Answers

Answer:

60 cm³

Step-by-step explanation:

volume of a rectangular pyramid

v = ( l * w * h ) / 3

v = ( 4 * 5 * 9 ) / 3

v = 60

what is $2^{-3}\cdot 3^{-2}$.

Answers

Answer:

[tex]\frac{1}{72}[/tex]

Step-by-step explanation:

[tex]2^{-3}\cdot 3^{-2}=\frac{1}{2^3}\cdot\frac{1}{3^2}=\frac{1}{8}\cdot\frac{1}{9}=\frac{1}{72}[/tex]

A spinner has five sectors of equal size the sectors are labeled 1, 2, 3, 4 and five the spinner is spun twice X is the number of times three is fun drag each bar on the horizontal axis to the correct location to create a probability distribution for X

Answers

The probability distribution for X is given as follows:

P(X = 0) = 0.64.P(X = 1) = 0.32.P(X = 2) = 0.04.

How to calculate a probability?

The parameters that are needed to calculate a probability are listed as follows:

Number of desired outcomes in the context of a problem or experiment.Number of total outcomes in the context of a problem or experiment.

Then the probability is calculated as the division of the number of desired outcomes by the number of total outcomes.

The distribution gives the probability of each possible outcome, hence it is given as follows:

P(X = 0) = 0.64.P(X = 1) = 0.32.P(X = 2) = 0.04.

Learn more about the concept of probability at https://brainly.com/question/24756209

#SPJ1

Circle 1 has center (-6, 2) and a radius of 8 cm. Circle 2 has center (-1,-4) and a radius 6 cm.
What transformations can be applied to Circle 1 to prove that the circles are similar?
Enter your answers in the boxes. URGENT PLEASE!!

Answers

Circle 1 (-6, 2) with a radius of 8 cm can be transformed into Circle 2 (-1, -4) with a radius of 6 cm through translation, scaling, and translation, proving their similarity.

To prove that two circles are similar, we need to find a sequence of transformations that maps one circle to another circle. In this case, we need to find a sequence of transformations that map Circle 1 to Circle 2. Circle 1 has a center (-6, 2) and a radius of 8 cm. Circle 2 has a center (-1,-4) and a radius of 6 cm.

Let's write the equations of the two circles:C1: (x + 6)² + (y - 2)² = 64C2: (x + 1)² + (y + 4)² = 36Step 1: TranslationWe can translate Circle 1 by (-5,-6) to obtain a new circle with center at the origin. The equation of the translated circle is C1': (x + 11)² + (y - 4)² = 64Step 2: Scale

We can scale the translated Circle 1' by a factor of 3/4 to obtain a circle with a radius of 6.

The equation of the scaled circle is C1'': (x + 11)² + (y - 4)² = 36Step 3: TranslationWe can translate the scaled Circle 1'' by (2,-4) to obtain a new circle with center at (-1,-4). The equation of the translated circle is C1''': (x - 1)² + (y + 4)² = 36The transformations applied to Circle 1 to obtain Circle 2 are:

Translation by (-5,-6)

Scale by 3/4

Translation by (2,-4)

Therefore, we can say that Circle 1 and Circle 2 are similar. Circle 1 can be transformed into Circle 2 by translation, scale, and translation.

For more questions on Circle

https://brainly.com/question/28162977

#SPJ8

The parallel gram shown below has an area of 72 units^2

Answers

Answer:

h = 12 units

Step-by-step explanation:

The formula for the area of a parallelogram is given by:

A = bh, where

b is the base of the parallelogram,and h is an altitude (i.e., a perpendicular line that connects the two bases of a parallelogram).

Thus, the base is 6 units.  We can find the height by dividing the area by 6:

A = bh

72 = 6h

72/6 = h

12 = h

Thus, the height of the parallelogram is 12 units.

The statement of cash flows for Baldwin shows what happens in the cash account during the year. It can be seen as a summary of the sources and uses of cash. Pleas answer which of the following is true if Baldwin issues bonds

Answers

If Baldwin issues bonds, the following statement would be true regarding the statement of cash flows:

The statement of cash flows would show an increase in the cash account due to the inflow of cash from the issuance of bonds.

When a company issues bonds, it typically receives cash from the bondholders as a form of borrowing. This inflow of cash would be categorized as a financing activity on the statement of cash flows. The specific section of the statement of cash flows that would capture this inflow would be the "Cash Flows from Financing Activities" section.

Therefore, if Baldwin issues bonds, the statement of cash flows would reflect an increase in the cash account due to the inflow of cash from the bond issuance.

HELP PLEASE AND HURRYY

Answers

Answer:

Part A: Answer: D.

Part B:

true

false

true

Step-by-step explanation:

Part A:

Use a tree.

Round 1                 Round 2                   Round 3

W                               W                                W

W                               W                                L

W                               L                                 W

W                                L                                 L

L                                 W                               W

L                                 W                               L

L                                 L                                W

L                                 L                                L

All possibilities are:

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

Answer: d.

Part B:

Winning 3 games is WWW.

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

Out of the 8 possible outcomes shown above, only 1 of them is WWW.

p(WWW) = 1/8

Answer: true

Winning exactly 2 games happens when there are exactly 2 W's:

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

p(exactly 2 wins) = 3/8

Answer: false

Wining at least 2 games means winning exactly 2 or exactly 3 times.

WWW, WWL, WLW, WLL, LWW, LWL, LLW, LLL

p(winning at least 2 games) = 4/8 = 1/2

Answer: true

Find the measure of the indicated angle.
45°
65°
55°
135°
270°
T

Answers

Answer: 55 degrees, a circle which a line is set on top of, as long as it rotates on the center along the circumference the total area is 360 degrees

What’s the value of each variable in the parallelogram

Answers

Answer:

m = 5

n = 12

Step-by-step explanation:

The parallel sides of a parallelogram are equal.

m +1 = 6 so m = 6 -1 = 5, and n = 12

Answer:

m = 5 , n = 12

Step-by-step explanation:

the opposite sides of a parallelogram are congruent , then

m + 1 = 6 ( subtract 1 from both sides )

m = 5

and

n = 12

Which is a valid prediction about the continuous function f(x)? • f(x) ≥ 0 over the interval [5, ∞). • f(x) ≤ 0 over the interval [-1, ∞). • f(x) > O over the interval (-0, 1). • f(x) < O over the interval (-0. -1).

Answers

Answer:

The valid prediction about the continuous function f(x) is : f(x) ≥ 0 over the interval [5, ∞).

Step-by-step explanation:

Why do we define
a curvature in terms of tha arc length?
i.e.
why do we put 's' into this definition?
(where s(t) is arc length function)

Answers

The inclusion of the arc length function in the definition of curvature provides a consistent and intrinsic measure of the rate of deviation from a straight line.

Incorporating arc length allows for the calculation of various geometric properties associated with curvature, such as the radius of curvature or the osculating circle.

The definition of curvature in terms of arc length is used to describe the rate at which a curve deviates from being a straight line. By incorporating the arc length function, denoted as 's(t)', into the definition, we can measure the curvature at different points along the curve.

Curvature, represented by 'k', is defined as the derivative of the unit tangent vector 'T' with respect to the arc length 's'. This definition has several advantages.

Firstly, it eliminates the dependency on the parametrization of the curve. Different parametrizations can yield the same curve, but their tangent vectors may differ. By using arc length as the parameter, we obtain an intrinsic measure of curvature that remains consistent regardless of the chosen parametrization.

Secondly, arc length provides a natural way to measure distance along the curve. By considering the derivative of the tangent vector with respect to arc length, we obtain a measure of how quickly the curve is turning per unit distance traveled.

Lastly, incorporating arc length allows for the calculation of various geometric properties associated with curvature, such as the radius of curvature or the osculating circle. These properties provide insights into the shape and behavior of the curve.

For more such questions on function visit:

https://brainly.com/question/11624077

#SPJ8

Which of the following pairs show(s) two congruent triangles?

O B only
OB and C only
O A, B, and C
O A and C only

Answers

Answer:

B only

Step-by-step explanation:

Triangles A and C are similar, but not congruent to each other. Similar triangles have proportional sides and congruent angles, while congruent triangles have congruent sides and congruent angles.

Therefore, only B is correct

Final answer:

The question is asking for pairs of congruent triangles but lacks key information needed to accurately answer this, such as lengths or angles. Congruent triangles are identified in geometry based on either side-lengths or angles.

Explanation:

The question is about congruent triangles, which in mathematics means triangles that have the same size and shape. But to accurately answer which pairs show two congruent triangles, we need more information. The options provided include 'A', 'B', and 'C' but without knowing more about these elements (for example their lengths or angles), it is impossible to determine which are congruent. Congruent triangles are identified in geometry based on either side lengths (SSS: Side-Side-Side, SAS: Side-Angle-Side, ASA: Angle-Side-Angle) or angles (AAS: Angle-Angle-Side, HL: Hypotenuse-Leg for right triangles). Without this vital information, we cannot definitively answer the question. Be sure to verify all the properties required to prove two triangles congruent.

Learn more about Congruent triangles here:

https://brainly.com/question/22062407

#SPJ2

Please answer ASAP I will brainlist

Answers

(a) The amount for total expenditures in 2015 was about $63.2 billion.

(b) The first full year in which expenditures exceeded $110 billion was 2027.

(a) To find the amount for total expenditures in 2015, we need to substitute x = 20 into the function h(x) = [tex]23.4(1.08)^{(x-5)[/tex].

h(x) = 23.4(1.0[tex]8)^{(20-5)[/tex]

    = 23.4(1.0[tex]8)^{15[/tex]

    ≈ 23.4(2.717)

Rounding to the nearest tenth, the total expenditures in 2015 were about $63.2 billion.

(b) To determine the first full year in which expenditures exceeded $110 billion, we need to find the value of x when h(x) is greater than $110 billion.

110 = 23.4(1.0[tex]8)^{(x-5)[/tex]

Dividing both sides by 23.4:

4.7008547... = (1.0[tex]8)^{(x-5)[/tex]

Taking the logarithm base 1.08 of both sides:

log₁.₀₈(4.7008547...) = x - 5

Using a logarithm calculator or software, we find:

x - 5 ≈ 11.75

Adding 5 to both sides:

x ≈ 16.75

Rounding to the nearest whole number, the first full year in which expenditures exceeded $110 billion was 2027.

For more such questions on amount, click on:

https://brainly.com/question/24644930

#SPJ8

The times taken for a group of people to
complete a race are shown below.
Estimate the number of people who took
longer than 325 minutes to complete the
race.
Cumulative frequency
250-
200-
150-
100-
50-
0
Time to complete a race
100 200 300 400 500
Time (minutes)

Answers

An estimate of 20 people took longer than 325 minutes to complete the race.

To estimate the number of people who took longer than 325 minutes to complete the race, we need to use the cumulative frequency distribution.

The cumulative frequency of a class interval is obtained by adding up the frequencies of all the class intervals up to and including that interval. The sum of the frequencies for each class interval is known as the cumulative frequency.In this case, the cumulative frequency distribution is given as follows:

Class Interval  |  Frequency  |  Cumulative Frequency250 - 200  |  5  |  5200 - 150  |  12  |  12150 - 100  |  18  |  30100 - 50  |  11  |  4050 - 0  |  4  |  44Total: 50

Now, to estimate the number of people who took longer than 325 minutes to complete the race, we need to look at the cumulative frequency that corresponds to 325 minutes.

From the table, we can see that the cumulative frequency of the class interval 300-400 minutes is 30. This means that 30 people took between 100 and 400 minutes to complete the race.

Therefore, the number of people who took longer than 325 minutes is the difference between the total number of people who took between 100 and 500 minutes and the number of people who took between 100 and 325 minutes. This can be calculated as follows:50 - 30 = 20.

Hence, an estimate of 20 people took longer than 325 minutes to complete the race.

For more such questions on estimate, click on:

https://brainly.com/question/597381

#SPJ8

The probable question may be:

Estimate the number of people who took longer than 325 minutes to complete the race, given the following cumulative frequency distribution:

Cumulative frequency:

250-

200-

150-

100-

50-

0

Time to complete a race:

100 200 300 400 500

Time (minutes).

Prove the following?

Answers

The given statement proposition is a that suggests that if x is an inductive element, defined in terms of the set X as described, then it follows that every non-zero natural number can be expressed as the successor of some other natural number.

The given statement is a logical proposition involving the concept of induction. Let's break it down and analyze its components.

"If x is inductive..."

This implies that x is a concept or object that possesses the property of being inductive. In mathematics, the term "inductive" typically refers to the property of being a natural number or belonging to the set of natural numbers.

"...then so is (x ∈ X : x = Ф or x = y ∪ {y} for some y)"

Here, we have a set X that consists of elements satisfying a certain condition. The condition states that an element x in X can either be equal to the empty set (Ф) or the union of a set y with itself ({y}). This construction represents a recursive definition, where each element in X is defined in terms of a base case (Ф) and a recursive step ({y}).

"...hence each n ≠ 0 is m + 1 for some m."

This conclusion states that for every natural number n that is not equal to 0, there exists another natural number m such that n can be expressed as m + 1. In other words, any non-zero natural number is the successor of some other natural number.

Overall, the given statement is a proposition that suggests that if x is an inductive element, defined in terms of the set X as described, then it follows that every non-zero natural number can be expressed as the successor of some other natural number.

for such more question on proposition

https://brainly.com/question/22008756

#SPJ8

B
A
C
Intro
y
-6
4
3
2
+
1
2 3
x
Suppose quadrilateral ABCD has been transformed by
Ty=x. What are the coordinates for the vertices of the
reflected quadrilateral A'B'C'D'?
A' =
B' =
C' =
D'=

Answers

The coordinates of the reflected quadrilateral A'B'C'D' are:

A' = (6, 4)

B' = (-3, 2)

C' = (-1, 23)

D' = (-x, 12)

To find the coordinates of the reflected quadrilateral A'B'C'D', we need to apply the transformation Ty = x to each vertex of the original quadrilateral ABCD. The transformation Ty = x reflects each point across the y-axis.

Given the coordinates of the original quadrilateral ABCD as:

A = (-6, 4)

B = (3, 2)

C = (+1, 23)

D = (x, 12)

Applying the transformation Ty = x to each vertex, we can determine the coordinates of the reflected quadrilateral A'B'C'D':

A' = (-(-6), 4) = (6, 4)

B' = (-3, 2)

C' = (-1, 23)

D' = (-x, 12)

The reflected quadrilateral A'B'C'D' thus has the following coordinates:

A' = (6, 4)

B' = (-3, 2)

C' = (-1, 23)

D' = (-x, 12)

Therefore, the x-coordinate for point D' will be represented as -x in the reflected quadrilateral.

for such more question on quadrilateral

https://brainly.com/question/10057464

#SPJ8

87,959 to the nearest hundred​

Answers

87,959 to the nearest hundredth would be 88,000

CAPM Elements
Value
Risk-free rate (rRF
)
Market risk premium (RPM
)
Happy Corp. stock’s beta
Required rate of return on Happy Corp. stock
An analyst believes that inflation is going to increase by 2.0% over the next year, while the market risk premium will be unchanged. The analyst uses the Capital Asset Pricing Model (CAPM). The following graph plots the current SML.
Calculate Happy Corp.’s new required return. Then, on the graph, use the green points (rectangle symbols) to plot the new SML suggested by this analyst’s prediction.
Happy Corp.’s new required rate of return is .

Answers

The new required rate of return for Happy Corp. can be calculated using the Capital Asset Pricing Model (CAPM). The formula for CAPM is:

Required rate of return = Risk-free rate + Beta * Market risk premium

Since the analyst believes that the market risk premium will be unchanged, the only factor that will affect the new required return is the risk-free rate.

Given that the analyst predicts a 2.0% increase in inflation, the risk-free rate will also increase by that amount. Therefore, the new required rate of return for Happy Corp. will be the current risk-free rate plus the product of Happy Corp.'s beta and the market risk premium.

To plot the new Security Market Line (SML) on the graph, we would use the new required return calculated above and plot it against the corresponding beta values. The SML represents the relationship between risk (beta) and return (required rate of return).

By incorporating the new required return, we can determine the new expected returns for various levels of beta and create the updated SML.

It is important to note that without specific values provided for the risk-free rate, market risk premium, and Happy Corp.'s beta, it is not possible to calculate the exact new required return or plot the new SML accurately.

These values are crucial in determining the precise position of the SML on the graph.

for such more questions on Capital

https://brainly.com/question/25893158

#SPJ8

Tyrone places a carton of milk and a box of cookies together. The carton of milk has a length of 6 inches, a width of 4 inches, and a height of 8 inches. The box of cookies has a length of 5 inches, a width of 4 inches, and a height of 2 inches. What is the combined volume of the boxes?

Answers

Therefore, the combined volume of the carton of milk and the box of cookies is 232 cubic inches.

To find the combined volume of the carton of milk and the box of cookies, we need to calculate the volume of each object and then add them together.

The volume of an object can be found by multiplying its length, width, and height. Let's calculate the volume for each item:

   Carton of milk:

   Volume = Length × Width × Height

   = 6 inches × 4 inches × 8 inches

   = 192 cubic inches

   Box of cookies:

   Volume = Length × Width × Height

   = 5 inches × 4 inches × 2 inches

   = 40 cubic inches

Now, we can find the combined volume by adding the volumes of the carton of milk and the box of cookies:

Combined Volume = Volume of Carton of milk + Volume of Box of cookies

= 192 cubic inches + 40 cubic inches

= 232 cubic inches

For such more question on volume

https://brainly.com/question/27710307

#SPJ8

Three vertices of a parallelogram are shown in the figure below.

Give the coordinates of the fourth vertex.

Answers

The coordinate of the fourth vertex is (9,11)

What is coordinate?

Any of a set of numbers used in specifying the location of a point on a line, on a surface, or in space is called coordinate

For example (6,3) is a coordinate on a plane where 6 represent the value on x axis and 3 represent the value on y axis.

Since the shape is parallelogram;

√ -3-1)² + 8-0)² = √ x-5)² + y-3)²

= √4² +8² = √ x-5)² + y -3)²

therefore, relating the two values;

4 = x-5 and 8 = y -3

x = 4+5 = 9

y = 8+3 = 11

Therefore the coordinate of the fourth vertex = ( 9,11)

learn more about coordinates from

https://brainly.com/question/17206319

#SPJ1

which equation could use the find the length of the hypotenuse
0 6² + 11² - c²
0 6²+c² - 11²
Oc²-6²-11²
0 11²-6²-c²

Answers

Answer:

A. 6² + 11² = c²

Step-by-step explanation:

The correct equation to find the length of the hypotenuse in a right triangle is the Pythagorean theorem, which states that the square of the length of the hypotenuse is equal to the sum of the squares of the other two sides.

In this case, if we assume that the length of one side is 6 and the length of the other side is 11, the correct equation would be:

A. 6² + 11² = c²

This equation can be simplified as follows:

36 + 121 = c²

157 = c²

Therefore, the correct equation to find the length of the hypotenuse in this case is A. 6² + 11² = c².

I dont understand these can someone help?

Answers

The corresponding sides and angles of the similar and congruent triangles indicates that we get the following approximate and exact values;

Page 1;

5. [tex]\overleftrightarrow{AC}[/tex] = 4.3. 6. [tex]\overline{BP}[/tex] ≈ 7.5 7. [tex]\overline{YV}[/tex] ≈ 8

Page 2

5. [tex]\overline{DF}[/tex] = [tex]11\frac{1}{4}[/tex], 6. [tex]\overline{ED}[/tex] = 5, 7. [tex]\overline{BC}[/tex] = 22, 8. [tex]\overline{EF}[/tex] = 8

Page 3;

8. m∠ABC = 30°, 9. m∠XYP = 44°, 10. [tex]\overline{AC}[/tex] = 14

What are congruent triangles?

Congruent triangles are triangles that have all three corresponding sides of the same length and all three angles of the same measure.

First Page

5. The distance from the vertex B to the line segment [tex]\overleftrightarrow{AC}[/tex] in the triangle ΔABC is the altitude of the triangle, which is 4.3

6. The distance from the vertex B to [tex]\overleftrightarrow{AC}[/tex] = [tex]\overline{BP}[/tex]

Pythagorean theorem indicates that the length of the segment [tex]\overline{BP}[/tex] can be found as follows;

[tex]\overline{BP}[/tex] = √(13.5² - 11.2²) ≈ 7.5

7. The distance from Y to  [tex]\overleftrightarrow{XZ}[/tex] is the altitude of the triangle ΔXYZ, which indicates;

The distance from Y to  [tex]\overleftrightarrow{XZ}[/tex] = [tex]\overline{YV}[/tex]

The Pythagorean theorem indicates that we get;

[tex]\overline{YV}[/tex] = √(13.34² - 10.67²) ≈ 8

Second page;

5. The scale factor from ΔABC to ΔDEF = 3/4

Therefore, the length of [tex]\overline{DF}[/tex] = (3/4) × 15 = 45/4 = [tex]11\frac{1}{4}[/tex]

6. The scale factor of (1/3) indicates that we get;

[tex]\overline{ED}[/tex] = (1/2) × 10 = 5

7. The ratio of the corresponding sides by length which is the scale factor is; S.F. = 18/9 = 10/5 = 2

The corresponding side to [tex]\overline{BC}[/tex] is [tex]\overline{EF}[/tex]

[tex]\overline{EF}[/tex] = 11, therefore, the length of [tex]\overline{BC}[/tex] = 2 × 11 = 22

8. The ratio of the corresponding sides by length which is the scale factor is; S.F. = 4/6 = 10/15 = 2/3

The corresponding side to [tex]\overline{EF}[/tex] is [tex]\overline{BC}[/tex]

[tex]\overline{BC}[/tex] = 12, therefore [tex]\overline{EF}[/tex] = (2/3) × 12 = 8

Third page;

8. The triangles ΔABV and ΔCVB are congruent triangles by the Leg Hypotenuse congruence theorem.

The angles ∠ABV and ∠CBV are corresponding triangles, therefore;

∠ABV ≅ ∠CBV

m∠CVB = m∠ABV = 15° (Definition of congruent triangles and symmetric and substitution property)

∠ABC = ∠ABV + ∠CBV

Therefore; m∠ABC = 15° + 15° = 30°

9. The angles ∠YXP and ∠YZP are right triangles, therefore;

m∠YXP = m∠YZP = 90°

The right triangles  ΔYXP and ΔYZP are congruent by the LH congruence theorem

∠XYP ≅ ∠ZYP (Corresponding Parts of Congruent Triangles are Congruent, CPCTC)

m∠XYP = m∠ZYP (Definition of congruent triangles)

m∠XYZ = m∠XYP + m∠ZYP (Angle addition property)

m∠XYZ = 2 × m∠XYP

2 × m∠XYP = m∠XYZ = 88°

m∠XYP = 88°/2 = 44°

10. The angles ∠ACP and ∠ABP are right angles, according to the indicated markings, therefore;

∠ACP ≅ ∠ABP (All right angles are congruent)

ΔACP ≅ ΔABP by SAA congruence theorem

[tex]\overline{AC}[/tex] ≅ [tex]\overline{AB}[/tex] (CPCTC)

[tex]\overline{AC}[/tex] = [tex]\overline{AB}[/tex] (Definition of congruent segments)

[tex]\overline{AC}[/tex] = [tex]\overline{AB}[/tex] = 14

Learn more on congruent triangles here: https://brainly.com/question/30642909

#SPJ1

What is the first step in solving ab -c = d for a

Answers

Answer:

See below

Step-by-step explanation:

To solve for "a", you would first isolate ab on the right-hand side by adding "c" on both sides:

[tex]ab-c=d\\ab-c+c=d+c\\ab=d+c[/tex]

Next, you would divide both sides by "b" to isolate "a":

[tex]ab=d+c\\ab\div b=(d+c)\div b\\a = \frac{d+c}{b}[/tex]

The solution is:

[tex]\large\boldsymbol{a = \dfrac{d + c}{b}}[/tex]

Work/explanation:

To solve the given expression for a, we should isolate it by using basic algebraic operations.

The first step is to add c to each side:

[tex]\sf{ab-c=d}[/tex]

[tex]\sf{ab=d+c}[/tex]

Now, divide each side by b:

[tex]\sf{a=\dfrac{d+c}{b}}[/tex]

I have solved the equation for a.

Thrrefore, the answer is a = d + c / b.

If PQ¯ is tangent to circle R at point Q, and PS¯ is tangent to ⊙R at point S, what is the perimeter of quadrilateral PQRS?

Answers

The perimeter of PQRS would depend on the lengths of the tangent segments and the lengths of the intercepted arcs. Without specific measurements, we cannot determine the precise perimeter.

To determine the perimeter of quadrilateral PQRS, we need more information about the lengths of the sides or the relationship between the sides and angles. Without specific measurements or additional details, we cannot calculate the exact perimeter of the quadrilateral.

However, we can provide some general information.Since PQ¯ is tangent to circle R at point Q, it is perpendicular to the radius drawn from the center of the circle to point Q. Similarly, PS¯ is tangent to circle R at point S, so it is perpendicular to the radius drawn to point S.

The quadrilateral PQRS is formed by the tangents PQ¯ and PS¯ along with the two arcs intercepted by these tangents on the circle R.

For more such questions on perimeter

https://brainly.com/question/12567822

#SPJ8

4x+y20
find the value of y when x =6

Answers

Answer:

y= -4

Step-by-step explanation:

To find the value of y when x = 6, we can substitute x = 6 into the equation and solve for y:

4(6) + y = 20

24 + y = 20

y = 20 - 24

y = -4

Therefore, when x = 6, y is equal to -4.

Other Questions
An electrochemical cell is based on the following two half-reactions:Oxidation: Pb(s) Pb2+(aq,0.20M)+2e E=0.13VReduction: MnO4(aq,1.35M)+4H+(aq,1.6M)+3eMnO2(s)+2H2O(l),E=1.68VCompute the cell potential at 25 CC.Express the cell potential in volts to three significant figures. Solve the initial value problem dx/dt+2x=cos(4t) with x(0)=3. x(t)= What are the characteristics of an independent clause? Select three options. It contains a subiect and a verb. It expresses a complete thought. It begins with a relative pronoun. It can stand alone as a complete sentence. It cannot stand alone as a complete sentence A ship X sailing with a velocity (21 kmh 052) observes a light fron a lighthuse due North. The bearing of the liglhthouse from the ship 20 minutes later is found to be 312. calcuate correct to thre sigificant figures i) the orignal distance when the lighthoues is due West of the ship from the time when it is due North of the ship. ii) the time in minutes, when the lighthouse is due West of the ship from the time when it is due North of the ship. iii) the distance in km of the ship from the lighthoue when the light.hose is due West of the ship An individual is innately motivated to be competent in human achievement" is a premise of what theory? Multidimensional model of sport confidence Psychological momentum in sport Cognitive evaluation theory Self-efficacy theory O Competence motivation theory What will happen when service exceeds "desired level"?What will happen when service falls below the "adequate level"? Python ProgrammingConsider the following questions about nested lists.(a) (2 pts) Create a nested list called sweet_matrix whose first element is the list [10,20,30], whose second element is the list [5,15,25], and whose third element is the list [1,2,3].(b) (2 pts) Change the 15 in sweet_matrix to be a 45.(c) (2 pts) Write a code that doubles the value of the first number in sweet_matrix(c) (4 pts) Use nested loops to sum up the values in sweet_matrix[Hint: you will need one for loop to step through each smaller list in sweet_matrix, and an inner for loop to step through the values in the current smaller list.] a) Let /(r,y)=2*cos(r). Compute the cartesian equation of the tangentplane to f(r, y) at the point (/2, 1).(b) Let f(r,y) = Icos(y) for 0 Experiments have been conducted on three geometrically similar air-foils. Since airfoils are thin, the fluid flow over airfoils can be considered to be like flow over flat plate, i.e., the streamwise pressure drop can be neglected. airfoils width of The (perpendicular to air stream) is 1.0 m. Neglect the curvature of airfoils in your calculations. The results obtained from experiments are shown below: Length, L (m) 1 0.2 0.5 Velocity, U.. (m/s) 10 5 10 Air temp., T.. Airfoil No. (K) 300 1 2 300 3 300 Considering the results presented in the above table, answer the following questions: Airfoil temp., Ts (K) 320 320 320 - We know that C = C Rem in which Cf and Re, are the average friction coefficient and the Reynolds number, respectively. Moreover, C and m are two constant parameters. Find C and m. Determine the friction on airfoil No 3 Determine the heat transfer between Airfoil 1 and the air stream Thermophysical properties of air is constant in all experiments. p= 1 kg.m k = 0.05 W.m-1. K-1 -3 = 10-5 Pa.s Friction force, F (N) 1 0.1 ??? Pr = 0.7 Which of the following statements are true regarding STRATEGIC MANAGEMENT( based on STRATEGIC MANAGEMENT OF HEALTH CARE ORGANIZATIONS 7TH EDITION)(a) A complex environment makes it difficult to establish a clear purpose for an organization.(b) Market entry strategies are used for reduction of scope of an organization.(c) The mission attempts to capture the organizations distinctive purpose.(d) Competitive advantage requires an organization to develop a distinctiveness that competitors do not have and cannot easily imitate.(e) The mission statement is relevant only to the present and is not relevant to the future.(f) A mission statement helps all employees focus their efforts on the most important priorities.(g) The identification of distinctiveness through a focus on the internal environment is intended to answer the strategic question "What should the organization do?".(h) Environmental analysis is an integral part of strategy formulation.(I) Cost leadership is an adaptive strategy for the expansion of an organizations scope.(j) Implementation strategies are developed to activate competitive strategies but do not serve this purpose for adaptive and market entry strategies. 255 MVA, 16 kV, 50 Hz0.8 p.f. leading, Two Pole, Y- connected Stator WindingsThis generator is operating in parallel with a large power system and has a synchronous reactance of 5 per phase and an armature resistance of 0.5 per phase. Determine:1. The phase voltage of this generator at rated conditions in volts?2. The armature current per phase at rated conditions in kA?3. The magnitude of the internal generated voltage at rated conditions in kV?4. The maximum output power of the generator in MW while ignoring the armature resistance? Make a response to the passage below. Your responses will include at least two of:a compliment, for example, "I like that; I like how"a comment, for example, "I agree.; I disagree"a connection, for example, "I also have seen/thought/heard"a question, for example, "I wonder why/how"I will say I have learned a lot from this psychology class. First, it was a lot to keep up with as it was going by so fast that I barely realized it. It has been such an exciting class. I have always been intrigued and wanted to understand people without really knowing them, to understand their behavior. I have always been a passionate and emotional person. Everyone has always told me I have emotional intelligence, but I never really knew where it came from or how I even have it. I could tell someone is not okay by just looking at them or when a friend makes a joke to one friend if the other person didn't take it so well. I would quickly tell too. Without someone telling me they are hurt, I would already know. I thought that was a gift until I entered this class and learned more about it.The most important topic for me was relationship and personality. Learning that relationships between parents and kids determine the type of personality they develop was such an exciting thing to know. I have always seen children from broken homes be so mean and rude, and now I understand why. We shouldn't judge people for their personalities because we dont know what they have been through. People from loving homes have been portrayed as loving and caring people because they have so much love, and they give much of it away. This class has been such an eye-opener to so many relatable topics. Can someone help me with this? I added the incomplete c++ code at the bottom of the instructions. Can anyone fix this?Instructions In this activity, we will extend the functionality of a class called "Date" using inheritance and polymorphism. You will be provided the parent class solution on Canvas, which includes the definition of this class. Currently, the Date class allows users of the class to store a date in month/day/year format. It has three associated integer attributes that are used to store the date as well as multiple defined operations, as described below: setDate-allows the user of the class to set a new date. Note that there is NO date validation in this definition of the method, which is a problem you will solve in this activity. getDate/Month/Year-a trio of getter methods that allow you to retrieve the day/month/and year number from the object. toString - a getter method that generates a string containing the date in "MM/DD/YYYY" format. Your task in this activity is to use inheritance to create a child class of the Date class called "DateExt". A partial definition of this class is provided to you on Canvas to give you a starting point. This child class will achieve the following: 1. Redefine the "setDate" method so that it does proper date validation. This method should return true or false if successful. The date should ONLY be set if the following is valid: a. The month is between 1 and 12. b. The day is valid for the given month. i. ii. I.e., November 31st is NOT valid, as November only has 30 days. Additionally, February must respect leap year rules. February 29th is only valid IF the year given is a leap year. To achieve this, you may need to create additional utility methods (such as a leap year method, for example). You can decide which methods you need. 2. Define additional operations: a. formatSimple-Outputs the date similar to toString, but allows the user to choose the separator character (i.e., instead of "/" they can use "-" to express the date). b. formatWorded-Outputs the date as "spelled out." For example: 3/12/2021 would be "March 12, 2021" if this method is called. i. For this one, you might consider creating a method that uses if statements to return the name equivalent of a month number. Once you are finished, create a test file to test each method. Create multiple objects and assign them different dates. Make sure to pick good dates that will test the logic in your methods to ensure no errors have occurred. Ensure that setDate is properly calling the new definition, as well as test the new operations. Submit your Date Ext definition to Canvas once you are finished. #pragma once #pragma once #include "Date.h" class DateExt :public Date { public: //This calls the parent class's empty constructor. //and then we call the redefined setDate method //in the child constructor. //Note that you do NOT have to modify the constructor //definitions. DateExt(int d, int m, int y) : Date() setDate(d, m, y); { DateExt(): Date() day = -1; month = -1; year = -1; { //Since the parent method "setDate" is virtual, //we can redefine the setDate method here. //and any objects of "DateExt" will choose //this version of the method instead of the parent //method. //This is considered "Run Time Polymorphism", which //is a type of polymorphism that occurs at runtime //rather than compile time(function/operator overloading //is compile time polymorphism). void setDate(int d, int m, int y) { /* Redefine setDate here...*/ /* Define the rest of the operations below */ private: /* Define any supporting/utility methods you need here */ Are NCAA rules, regulations, and penalties fair andeffective? Polygon s is a scaled copy of polygon R. What is the value of t Ethylene oxide is produced by the catalytic oxidation of ethylene: C 2H 4+O 2C 2H 4O An undesired competing reaction is the combustion of ethylene: C 2H 4+O 2CO 2+2H 2O The feed to the reactor (not the fresh feed to the process) contains 3 moles of ethylene per mole of oxygen. The single-pass conversion of ethylene in the reactor is 20%, and 80% of ethylene reacted is to produce of ethylene oxide. A multiple-unit process is used to separate the products: ethylene and oxygen are recycled to the reactor, ethylene oxide is sold as a product, and carbon dioxide and water are discarded. Based on 100 mol fed to the reactor, calculate the molar flow rates of oxygen and ethylene in the fresh feed, the overall conversion of ethylene and the overall yield of ethylene oxide based on ethylene fed. (Ans mol, 15 mol,100%,80% ) PBL CONSTRUCTION MANAGEMENT CE-413 SPRING-2022 Course Title Statement of PBL Construction Management A construction Project started in Gulberg 2 near MM Alam Road back in 2018. Rising and volatile costs and productivity issues forced this project to exceed budgets. Couple of factors including Pandemic, international trade conflicts, inflation and increasing demand of construction materials resulted in cost over Run of the project by 70 % so far. Apart from these factors, analysis showed that poor scheduling, poor site management and last-minute modifications caused the cost overrun. Also, it is found that previously they didn't used any software to plan, schedule and evaluate this project properly. Now, you are appointed as Project manager where you have to lead the half of the remaining construction work as Team Leader. Modern management techniques, and Primavera based evaluations are required to establish a data-driven culture rather than one that relies on guesswork. A wheel with radius 37.9 cm rotates 5.77 times every second. Find the period of this motion. period: What is the tangential speed of a wad of chewing gum stuck to the rim of the wheel? tangential speed: m/s A device for acclimating military pilots to the high accelerations they must experience consists of a horizontal beam that rotates horizontally about one end while the pilot is seated at the other end. In order to achieve a radial acceleration of 26.9 m/s 2with a beam of length 5.69 m, what rotation frequency is required? A electric model train travels at 0.317 m/s around a circular track of radius 1.79 m. How many revolutions does it perform per second (i.e, what is the motion's frequency)? frequency: Suppose a wheel with a tire mounted on it is rotating at the constant rate of 2.17 times a second. A tack is stuck in the tire at a distance of 0.351 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed. tangential speed: m/s What is the tack's centripetal acceleration? centripetal acceleration: m/s 2 On December 31, Fulana Company has decided to sell one of its specialized Trucks.The initial cost of the trucks was $215,000 with an accumulated depreciation of $185,000.Depreciation taken up to the end of the year. The company found a company that iswilling to buy the equipment for $55,000. What is the amount of the gain or loss on thistransaction?a. Cannot be determinedb. No gain or lossc. Gain of $25,000d. Gain of $55,000 Consider a mass-spring system without external force, consisting of a mass of 4 kg, a spring with an elasticity constant (k) of 9 N/m, and a shock absorber with a constant. =12. a. Determine the equation of motion for an instant t. b. Find the particular solution if the initial conditions are x(0)=3 and v(0)=5. c. If an over-cushioned mass-spring system is desired, What mathematical condition must the damping constant meet?