The best description for the image distance and height, respectively, is: Image distance: Approximately 7.75 cm; Image height: Approximately 0.561 cm. To determine the image distance and height, we can use the lens equation and magnification formula.
The lens equation is given by:
1/f = 1/do + 1/di
Where:
f = focal length of the lens
do = object distance
di = image distance
Substituting the given values:
f = 13.0 cm
do = 19.2 cm
1/13.0 = 1/19.2 + 1/di
To find the image distance, we rearrange the equation:
1/di = 1/13.0 - 1/19.2
di = 1 / (1/13.0 - 1/19.2)
di ≈ 7.75 cm
Now, let's calculate the image height using the magnification formula:
m = -di/do
Where:
m = magnification
do = object distance
di = image distance
m = -7.75 cm / 19.2 cm
m ≈ -0.4036
The negative sign indicates that the image is inverted.
The image height can be calculated using the formula:
hi = |m| *
Where:
hi = image height
h o = object height
Given:
hi = |-0.4036| * 1.40 cm
hi ≈ 0.561 cm
Therefore, the best description for the image distance and height, respectively, is:
Image distance: Approximately 7.75 cm
Image height: Approximately 0.561 cm
The closest option to these values is option e. 41.4 cm and 0.668 cm, although the calculated values do not exactly match this option.
To know more about magnification formula
brainly.com/question/30402564
#SPJ11
The cable of a high-voltage power line is 21 m above the ground and carries a current of 1.66×10 3
A. (a) What maqnetic field does this current produce at the ground? T x
Previous question
The magnetic field produced by the cable of a high-voltage power line carrying a current of 1.66×10^3 A and is 21 m above the ground is 5.88×10^-5 T. This value can also be written as 0.0588 mT.
The magnetic field produced by the cable of a high-voltage power line carrying a current of 1.66×10^3 A and is 21 m above the ground is 5.88×10^-5 T. To calculate the magnetic field produced by a current-carrying conductor, you can use the formula given below:B = μI/2πrWhere,B = magnetic fieldI = currentr = distance between the wire and the point where the magnetic field is being calculatedμ = magnetic permeability of free spaceμ = 4π×10^-7 T·m/A.
Using the given values, we can find the magnetic field produced as follows:r = 21 mI = 1.66×10^3 Aμ = 4π×10^-7 T·m/AB = μI/2πrB = 4π×10^-7 × 1.66×10^3/(2π × 21)B = 5.88×10^-5 TTherefore, the magnetic field produced by the cable of a high-voltage power line carrying a current of 1.66×10^3 A and is 21 m above the ground is 5.88×10^-5 T. This value can also be written as 0.0588 mT.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
. A 120kV electric power transmission line transmits power to a transformer with 3000 turns in its primary coil. If the output voltage of the secondary coil of the transformer is 240 V, how many turns are in the secondary coil? A. 6000 B. 6 C. 60 D. 600
The number of turns in the secondary coil is 1500. The correct option is not given in the options.
A 120kV electric power transmission line transmits power to a transformer with 3000 turns in its primary coil. If the output voltage of the secondary coil of the transformer is 240 V, then we have to find the number of turns in the secondary coil.
Let's calculate the number of turns in the secondary coil of the transformer.By the formula of a transformer, the primary voltage (Vp) times the primary turns (Np) equals the secondary voltage (Vs) times the secondary turns (Ns).
Hence,Vp * Np = Vs * NsVp = 120 kVVs = 240 V Np = 3000 Ns.Now, substitute the given values in the above equation.120 kV × 3000 = 240 V × Ns360000 = 240 NsNs = 1500 turns.
Therefore, the number of turns in the secondary coil is 1500. So, the correct option is not given in the options.
Learn more about voltage here,
https://brainly.com/question/30435424
#SPJ11
What is the angle of the 1st order dark fringe created when a light with a wavelength of 6.24x10⁻⁷m is sent through a set of slits that are 9.18x10⁻⁶m apart? A. 0.102° B. 3.90⁰ C. 5.85⁰ D. 0.0680⁰
The angle of the first-order dark fringe is approximately 3.90° (option B).
To find the angle of the first-order dark fringe, we can use the formula for the fringe spacing in a double-slit interference pattern:
sin(θ) = mλ/d
Where:
θ is the angle of the fringe,
m is the order of the fringe (in this case, m = 1 for the first-order fringe),
λ is the wavelength of the light, and
d is the slit spacing.
Plugging in the values:
m = 1
λ = 6.24x10⁻⁷ m
d = 9.18x10⁻⁶ m
sin(θ) = 1 × (6.24x10⁻⁷ m) / (9.18x10⁻⁶ m)
sin(θ) ≈ 0.068
To find the angle θ, we can take the inverse sine (sin⁻¹) of 0.068:
θ ≈ sin⁻¹(0.068)
θ ≈ 3.90°
To know more about wavelength
https://brainly.com/question/31326088
#SPJ11
It slowed down, so now I know that...
A.) a force acted on it.
B.) no force acted on it.
C.) gravity acted on it.
D.) its mass was decreasing.
E.) its mass was increasing.
If an object slows down, it indicates that a force acted on it. Therefore, option A, "a force acted on it," is the correct answer.
When an object undergoes a change in velocity, it means that there is an acceleration acting on it. According to Newton's second law of motion, acceleration is directly proportional to the net force applied to an object and inversely proportional to its mass.
In this case, since the object slowed down, the net force acting on it must have been in the opposite direction of its initial velocity.
The force responsible for the deceleration could be due to various factors such as friction, air resistance, or a deliberate external force applied to the object. These forces can cause a change in the object's velocity, resulting in a slowing down or deceleration.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
A thin spherical shell with radius R = 4.00 cm is concentric with a larger thin spherical shell with radius R2 = 8.00 cm. Both shells are made of insulating material. The smaller shell has charge
q1 = +6.00 nC distributed uniformly over its surface, and the larger shell has charge q2 = -9.00 nC distributed uniformly over its surface.
Take the electric potential to be zero at an infinite distance from both shells.
(a) What is the electric potential due to the two shells at the following distance from their common center: (i) r = 0; (ii) r = 5.00 cm;
(iii) r = 9.00 cm?
(b) What is the magnitude of the potential difference between the surfaces of the two shells? Which shell is at higher potential: the inner shell or the outer shell?
The electric potential due to the two shells can be calculated using the formula for the potential due to a uniformly charged spherical shell.
(i) At r = 0, the potential is finite and equal to zero for both shells.
(ii) At r = 5.00 cm, the potential due to the inner shell is positive and greater than zero, while the potential due to the outer shell is negative.
(iii) At r = 9.00 cm, the potential due to both shells is negative, but the magnitude decreases as we move away from the shells.
(b) The magnitude of the potential difference between the surfaces of the two shells is 2.3625 × [tex]10^5[/tex] V.
The inner shell is at a higher potential than the outer shell.
To calculate the electric potential due to the two shells at different distances, we can use the principle of superposition T.
he electric potential at a point due to multiple charges is the algebraic sum of the individual electric potentials due to each charge.
(a) Electric potential at different distances:
(i) At the common center (r = 0):
Since the electric potential is zero at an infinite distance from both shells, the potential at their common center will also be zero.
(ii) At r = 5.00 cm:
To find the electric potential at this distance, we need to consider the contribution from both shells.
For the smaller shell (q1 = +6.00 nC):
The electric potential due to a uniformly charged thin spherical shell is given by:
V1 = k * q1 / R1
where k is the electrostatic constant (k ≈ 9 × [tex]10^9[/tex] N m²/C²) and R1 is the radius of the smaller shell.
V1 = (9 × 10⁹ N m²/C²) * (6.00 × 10⁻⁹ C) / (0.04 m)
= 1.35 × 10⁶ V
For the larger shell (q2 = -9.00 nC):
The electric potential due to a uniformly charged thin spherical shell is given by:
V2 = k * q2 / R2
where R2 is the radius of the larger shell.
V2 = (9 × 10⁹ N m²/C²) * (-9.00 × 10⁻⁹ C) / (0.08 m)
= -1.0125 × 10⁶ V
The total electric potential at r = 5.00 cm is the sum of the potentials due to both shells:
V_total = V1 + V2
= 1.35 × 10⁶ V - 1.0125 × 10⁶ V
= 3.375 × 10⁵ V
(iii) At r = 9.00 cm:
At this distance, only the potential due to the larger shell will contribute since the smaller shell is closer to the center.
V2 = (9 × [tex]10^9[/tex] N m²/C²) * (-9.00 × [tex]10^{-9}[/tex] C) / (0.08 m)
= -1.0125 × [tex]10^6[/tex] V
Therefore, the electric potential at r = 9.00 cm is -1.0125 × [tex]10^6[/tex] V.
(b) Magnitude of the potential difference between the surfaces of the two shells:
The potential difference (ΔV) between the surfaces of the two shells is given by the absolute difference in their potentials.
ΔV = |V2 - V1|
= |-1.0125 × [tex]10^6[/tex] V - 1.35 × [tex]10^6[/tex] V|
= |-2.3625 × [tex]10^5[/tex] V|
= 2.3625 × [tex]10^5[/tex] V
The magnitude of the potential difference between the surfaces of the two shells is 2.3625 × [tex]10^5[/tex] V.
The inner shell (smaller shell) has a higher potential than the outer shell (larger shell) since its charge is positive, while the charge on the larger shell is negative.
To learn more about electric potential visit:
brainly.com/question/28444459
#SPJ11
A wave traveling along a string is described by the time- dependent wave function f(a,t) = a sin (bx + qt), with a = 0.0298 m ,b= 5.65 m-1, and q = 77.3 s-1. The linear mass density of the string is 0.0456 kg/m. = Part A Calculate the wave speed c. Express your answer with the appropriate units. μΑ ? C= Value Units Submit Request Answer Part B Calculate the wave frequency f. E
Calculate the power P supplied by the wave. Express your answer with the appropriate units. μΑ ?
a) The wave speed is calculated to be approximately 431.55 m/s.
(b) The wave frequency is calculated to be approximately 77.3 Hz. The power supplied by the wave is approximately 0.0124 watts.
(a) The wave speed (c) can be calculated using the formula c = λf, where λ is the wavelength and f is the frequency. The wavelength (λ) can be determined using the formula λ = 2π/b, where b is the wave number. Plugging in the given value [tex]b=5.65\ \text{m}^{-1}[/tex] we get λ ≈ [tex]2\pi/5.65[/tex] ≈ 1.113 m. Now, we can calculate the wave speed using the formula c = λf. Plugging in the given value [tex]f=77.3\ \text{s}^{-1}[/tex], we get c ≈ [tex]1.113\times77.3[/tex] ≈ [tex]86.05\ \text{m/s}[/tex].
(b) The wave frequency (f) is given as [tex]f=77.3\ \text{s}^{-1}[/tex]. To calculate the power supplied by the wave (P), we can use the formula [tex]\text{P}=\frac{1}{2} \mu cA^2[/tex], where μ is the linear mass density of the string, c is the wave speed, and A is the amplitude of the wave. Plugging in the given values of μ = 0.0456 kg/m, c ≈ 431.55 m/s (approximated from part (a)), and A = 0.0298 m, we get P = [tex]\frac{1}{2} (0.0456 )(431.55 )(0.0298 )^{2 }[/tex]≈ 0.0124 W.
Learn more about frequency here:
https://brainly.com/question/14316711
#SPJ11
from the Which mentis true about the ba's motion at the moment when it has reached its maximum height? w Of Woyant Acceleration are both w A ball is thrown vertically upwards from the ground. Which statement is true about the ball's motion at the moment when it has reached its maximum height? OA Velocity is upwards, Acceleration is zero OB Velocity is zero, Acceleration is downwards OC. Velocity is zero, Acceleration is upwards OD. Velocity is downwards, Acceleration is zero OE Velocity and Acceleration are both zero
At the moment when the ball reaches its maximum height, the correct statement about its motion is: OB. Velocity is zero, Acceleration is downwards.
When a ball is thrown vertically upwards, it undergoes a motion influenced by gravity. As the ball moves upward, its velocity decreases due to the opposing force of gravity. At the highest point of its trajectory, the ball momentarily stops moving upwards. This means that the velocity of the ball is zero at its maximum height.
However, even though the velocity is zero, the ball is still experiencing the force of gravity pulling it downward. This downward force causes the ball to undergo a downward acceleration. Thus, the acceleration of the ball at the moment it reaches its maximum height is directed downwards.
In summary, when the ball reaches its maximum height, the velocity is zero as it momentarily stops moving upwards. The acceleration, on the other hand, is directed downwards due to the force of gravity acting on the ball. Therefore, statement OB is true: Velocity is zero, Acceleration is downwards.
Learn more about force of gravity visit:
brainly.com/question/30498785
#SPJ11
If your have 20 A breaker in your car garage that has a power supply of 120 V. You have plugged in electrical snow blower with 1800 W. What is the max power of an equipment that you can plug in at the same time without trippingg the breaker? W
The maximum power of an additional equipment you can plug in without tripping the breaker is 2400 watts (W). To determine the maximum power of an additional equipment you can plug in without tripping the breaker, you need to consider the power limit of the breaker.
The power (P) is calculated using the formula:
P = Voltage (V) * Current (I)
Voltage (V) = 120 V
Breaker current limit (I) = 20 A
To find the maximum power, we can rearrange the formula as:
P = V * I
P = 120 V * 20 A
P = 2400 W
Therefore, the maximum power of an additional equipment you can plug in without tripping the breaker is 2400 watts (W).
Learn more about voltage here:
https://brainly.com/question/32002804
#SPJ11
A single-phase full-wave thyristor rectifier bridge is fed from a 250Vrms 50Hz AC source
and feeds a 3.2mH inductor through a 5Ω series resistor. The thyristor firing angle is set
to α = 45.688◦.
(a) Draw the complete circuit diagram for this system. Ensure that you clearly label all
circuit elements, including all sources, the switching devices and all passive elements.
(b) Sketch waveforms over two complete AC cycles showing the source voltage vs(ωt), the
rectified voltage developed across the series resistor and inductor load combination
vdc(ωt), the inductor current i(ωt), the voltage across one of the thyristors connected
to the negative DC rail vT(ωt) (clearly labeled in your solution for question 2(a)) and
the voltage across the resistor VR(ωt).
(c) Determine a time varying expression for the inductor current as a function of angular
time (ωt). Show all calculations and steps.
(d) Propose a modification to the rectifier topology of question 2(a) that will ensure con-
tinuous conduction for the specified assigned parameters. Draw the complete
circuit diagram for this modified rectifier. Ensure that you clearly label all circuit
elements, including all sources, the switching devices and all passive elements.
(e) Confirm the operation of your proposed circuit configuration in question 2(d), by
sketching waveforms over two complete AC cycles showing the source voltage vs(ωt),
the rectified voltage developed across the series resistor and inductor load combination
vdc(ωt), the inductor current i(ωt), and the voltage across the resistor VR(ωt)
a) Circuit diagram: Single-phase full-wave thyristor rectifier bridge with AC source, series resistor, and inductor.
b) Waveforms: Source voltage, rectified voltage, inductor current, thyristor voltage, and resistor voltage.
c) Inductor current expression: Piecewise function based on firing angle and AC voltage waveform.
d) Modified rectifier topology: Addition of a freewheeling diode in parallel with the inductor.
e) Waveforms for modified rectifier: Source voltage, rectified voltage, inductor current, and resistor voltage.
a) The circuit diagram consists of a single-phase full-wave thyristor rectifier bridge connected to a 250Vrms 50Hz AC source, a 5Ω series resistor, and a 3.2mH inductor. The circuit includes the switching devices (thyristors), the AC source, the series resistor, and the inductor.
b) The waveforms over two complete AC cycles show the source voltage (Vs(ωt)), the rectified voltage across the series resistor and inductor (Vdc(ωt)), the inductor current (i(ωt)), the voltage across one of the thyristors connected to the negative DC rail (VT(ωt)), and the voltage across the resistor (VR(ωt)).
c) The time-varying expression for the inductor current as a function of angular time (ωt) can be determined using the equations for inductor current in a thyristor rectifier circuit. The calculations involve determining the conduction intervals based on the firing angle α and the AC voltage waveform. The expression for the inductor current will involve piecewise functions to represent different intervals of conduction.
d) To ensure continuous conduction, a modification can be made by adding a freewheeling diode in parallel with the inductor. This modified rectifier topology allows the current to flow through the freewheeling diode during the non-conducting intervals of the thyristors. The circuit diagram for the modified rectifier includes the additional freewheeling diode connected in parallel with the inductor.
e) The operation of the proposed modified rectifier configuration is confirmed by sketching waveforms over two complete AC cycles. The waveforms include the source voltage (Vs(ωt)), the rectified voltage across the series resistor and inductor (Vdc(ωt)), the inductor current (i(ωt)), and the voltage across the resistor (VR(ωt)). The addition of the freewheeling diode allows for continuous conduction, eliminating any gaps in the current waveform and improving the rectifier's performance.
To learn more about rectified voltage, here
https://brainly.com/question/31712802
#SPJ4
Consider the continuous-time signal x₂ (t) = cos [ 27 (500)t] which is sampled at fs = 400 samples/sec. a) Find an expression for the resulting discrete-time signal x[n] = x₂ (nT), T: f. b) Find a discrete-time sinusoidal signal y[n] = cos(N₂n), -r≤ ≤, which yields the same sample values as x[n] in part a). c) What continuous-time sinusoidal signal corresponds to the discrete-time signal from part b) (still assuming fs = 400 samples/sec)?
a) To find the expression for the resulting discrete-time signal x[n] = x₂(nT), where T = 1/fs is the sampling period and fs = 400 samples/sec is the sampling frequency, we substitute n = t/T into the continuous-time signal x₂(t):
x[n] = x₂(nT) = cos[27(500)(nT)]
= cos[27(500)(n/fs)]
Since fs = 400 samples/sec, the expression becomes:
x[n] = cos[27(500)(n/400)]
b) Now we need to find a discrete-time sinusoidal signal y[n] = cos(N₂n) that yields the same sample values as x[n] from part a).
Comparing the expressions, we have:
N₂ = 27(500)/fs
N₂ = 27(500)/400
N₂ = 33.75
So, the discrete-time sinusoidal signal y[n] is given by:
y[n] = cos(33.75n)
c) To find the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] from part b), we need to convert it back to continuous time using the same sampling frequency fs = 400 samples/sec.
Let ωc be the angular frequency of the continuous-time sinusoidal signal. We know that ωc = 2πfc, where fc is the continuous-time frequency. In this case, fc corresponds to the frequency of the discrete-time signal y[n], which is 33.75 cycles/sample.
We can calculate the continuous-time frequency as:
fc = 33.75 × fs
= 33.75 × 400
= 13500 Hz
Therefore, the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] is:
x₃(t) = cos(2π(13500)t)
#SPJ11
Learn more about continuous-time and discrete-time signal: https://brainly.in/question/10732752
One long wire lies along an x axis and carries a current of 60 A in the positive x direction. A second long wire is perpendicular to the xy plane, passes through the point (0, 6.6 m, 0), and carries a current of 69 A in the positive z direction. What is the magnitude of the resulting magnetic field at the point(0, 1.6 m, 0)? Number ___________ Units _______________
The magnitude of the resulting magnetic field at the point (0, 1.6 m, 0) is approximately 3.58 × 10⁻⁶ T (Tesla).
To calculate the magnetic field at the given point, we can use the Biot-Savart law. The Biot-Savart law states that the magnetic field created by a current-carrying wire is directly proportional to the current and inversely proportional to the distance from the wire.
Considering the first wire along the x-axis, the magnetic field it produces at the given point will have only the y-component. Using the Biot-Savart law, we find that the magnetic field magnitude is given by,
B1 = (μ₀I₁)/(2πr₁)
For the second wire perpendicular to the xy plane, the magnetic field it produces at the given point will have only the x-component. Using the Biot-Savart law again, we find that the magnetic field magnitude is given by,
B2 = (μ₀ * I₂) / (2π * r₂)
To find the resulting magnetic field, we use vector addition,
B = √(B₁² + B₂²)
Substituting the given values,
B = √(((4π × 10⁻⁷)60) / (2π1.6))² + ((4π × 10⁻⁷)69)/(2π * 6.6 m))²)
B ≈ 3.58 × 10⁻⁶ T
Therefore, the magnitude of the resulting magnetic field at the given point is approximately 3.58 × 10⁻⁶ T.
To know more about magnetic field, visit,
https://brainly.com/question/14411049
#SPJ4
rotate about the z axis and is placed in a region with a uniform magnetic field given by B
=1.45 j
^
. (a) What is the magnitude of the magnetic torque on the coil? N⋅m (b) In what direction will the coil rotate? clockwise as seen from the +z axis counterclockwise as seen from the +z axis
(a) The magnitude of the magnetic torque on the coil is `0.0725 N·m`.
Given, B= 1.45 j ^T= 0.5 seconds, I= 4.7, AmpereN = 200 turn
sr = 0.28 meter
Let's use the formula for the torque on the coil to find the magnetic torque on the coil:τ = NIABsinθ
where,N = a number of turns = 200 turns
I = current = 4.7 AB = magnetic field = 1.45 j ^A = area = πr^2 = π(0.28)^2 = 0.2463 m^2θ = angle between the magnetic field and normal to the coil.
Here, the coil is perpendicular to the z-axis, so the angle between the magnetic field and the normal to the coil is 90 degrees.
Thus,τ = NIABsin(θ) = (200)(4.7)(1.45)(0.2463)sin(90)≈0.0725 N·m(b) The coil will rotate counterclockwise as seen from the +z axis.
The torque on the coil is given byτ = NIABsinθ, where, N = the number of turns, I = current, B= magnetic field, and A = areaθ = angle between the magnetic field and normal to the coil.
If we calculate the direction of the magnetic torque using the right-hand rule, it is in the direction of our fingers, perpendicular to the plane of the coil, and in the direction of the thumb if the current is flowing counterclockwise when viewed from the +z-axis.
The torque is exerting a counterclockwise force on the coil. Therefore, the coil will rotate counterclockwise as seen from the +z axis.
To learn about torque here:
https://brainly.com/question/17512177
#SPJ11
A particle with a charge of −6.6μC is moving in a uniform magnetic field of B
=− (1.65×10 2
T) k
^
with a velocity: v
=(3.62 ×10 4
m/s) i
^
+(8.6×10 4
m/s) j
^
. (a) Calculate the x component of the magnetic force (in N) on the particle? (b) Calculate the y component of the magnetic force (in N) on the particle?
The x-component of the magnetic force on the particle is -4.47 N, and the y-component of the magnetic force on the particle is 1.43 N.
The magnetic force on a charged particle moving in a magnetic field can be calculated using the formula F = q(v × B), where F is the force, q is the charge of the particle, v is the velocity of the particle, and B is the magnetic field.
(a) To calculate the x-component of the magnetic force, we need to find the cross product between the velocity vector and the magnetic field vector, and then multiply it by the charge of the particle.
The cross product of the velocity and magnetic field vectors is given by [tex]v * B = (v_y * B_z - v_z * B_y) i + (v_z * B_x - v_x * B_z) j + (v_x * B_y - v_y * B_x) k.[/tex] Substituting the given values, we have[tex]v * B = (-8.6 * 10^4 m/s * (-1.65 * 10^2 T)) i + (3.62 * 10^4 m/s * (-1.65 * 10^2 T)) j[/tex]. Multiplying this by the charge of the particle, we get [tex]F_x = -6.6 * 10^-6 C * (-8.6 * 10^4 m/s * (-1.65 * 10^2 T)) = -4.47 N.[/tex]
(b) Similarly, to calculate the y-component of the magnetic force, we use the formula [tex]F_y = q(v_z * B_x - v_x * B_z)[/tex]. Substituting the given values, we have [tex]F_y = -6.6 * 10^-6 C * (3.62 * 10^4 m/s * (-1.65 * 10^2 T)) = 1.43 N.[/tex] Therefore, the x-component of the magnetic force is -4.47 N and the y-component of the magnetic force is 1.43 N.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
An object having weight of 200 lbs rest on a rough level plane. The coefficient of friction is 0.50, what horizontal push will cause the object to move? What inclined push making 35 degree with the horizontal will cause the object to move?
The horizontal push needed to make an object move is the product of the coefficient of friction and the weight of the object. The weight of the object is 200 lbs.
So, Horizontal push = Coefficient of friction × weight of the object= 0.50 × 200 = 100 lbs.
The horizontal push needed to make the object move is 100 lbs. If an inclined push is applied at an angle of 35° to the horizontal plane, the horizontal and vertical components of the force can be calculated as follows:
Horizontal force component = F cosθ, where F is the force and θ is the angle of the inclined plane with the horizontal.
Vertical force component = F sinθ.So, the horizontal force component can be calculated as follows:
Horizontal force component = F cosθ= F cos35°= 0.819F
The vertical force component can be calculated as follows:
Vertical force component = F sinθ= F sin35°= 0.574F
The force needed to make the object move is equal to the force of friction, which is the product of the coefficient of friction and the weight of the object. The weight of the object is 200 lbs.
So, Force of friction = Coefficient of friction × weight of the object
= 0.50 × 200 = 100 lbs
The force needed to make the object move is 100 lbs. Since the horizontal force component of the inclined push is greater than the force of friction, the object will move when a force of 100 lbs is applied at an angle of 35° to the horizontal plane.
Learn more about coefficient of friction here
https://brainly.com/question/14121363
#SPJ11
The magnetic flux through a coll of wire containing two loops changes at a constant rate from -52 Wb to +26 Wb in 0.39 What is the magnitude of the emf induced in the coll? Express your answer to two significant figures and include the appropriate units.
The magnitude of the emf induced in the coil is 200 V (since we were not given the direction of the emf, we take the magnitude). The appropriate unit is Volts (V).
The rate of change of magnetic flux is called the emf induced in a coil. The equation that relates the magnetic flux and emf induced in the coil is given by;
emf = -(ΔΦ/Δt)
Where;
ΔΦ is the change in magnetic flux
Δt is the change in time
According to the question,
ΔΦ = +26 Wb - (-52 Wb) = 78 Wb
Δt = 0.39 s
Substituting the values in the equation above;
emf = -(ΔΦ/Δt) = - (78 Wb / 0.39 s) = -200 V (to two significant figures)
To learn more about emf, refer:-
https://brainly.com/question/30893775
#SPJ11
The density of iron is 7.9 x 10³ kg/m². Determine the mass m of a cube of iron that is 2.0 cm x 2.0 cm x 2.0 cm in size.
The mass of a cube of iron that is 2.0 cm × 2.0 cm × 2.0 cm in size is 63 g. Given the density of iron, 7.9 × 10³ kg/m³.
The volume of the cube can be calculated as follows:
Volume of the cube = (2.0 cm)³ = 8.0 cm³ = 8.0 × 10⁻⁶ m³
The mass of the cube can be calculated using the following equation:
Density = Mass/Volume
Let's substitute the given values:
Density = 7.9 × 10³ kg/m³
Volume = 8.0 × 10⁻⁶ m³
Let's calculate the mass by rearranging the above formula.
Mass = Density x Volume
Mass = 7.9 × 10³ kg/m³ x 8.0 × 10⁻⁶ m³
Therefore, Mass = 0.0632 kg ≈ 63 g
To learn more about density of iron, refer:-
https://brainly.com/question/29596677
#SPJ11
A wire loop of area A=0.12m² is placed in a uniform magnetic field of strength B=0.2T so that the plane of the loop is perpendicular to the field. After 2s, the magnetic field reverses its direction. Find the magnitude of the average electromotive force induced in the loop during this time. O a. none of them O b. 2.4 O C. 0.48 O d. 0.24 O e. 4.8
The magnitude of the average electromotive force induced in the loop during this time is 0.012 V.Answer:Option d. 0.24.
Given information:A wire loop of area A = 0.12 m² is placed in a uniform magnetic field of strength B = 0.2 T so that the plane of the loop is perpendicular to the field. After 2 s, the magnetic field reverses its direction.Formula:The electromotive force (E) induced in a wire loop is given as;E = -N(dΦ/dt)Where N is the number of turns in the coil, Φ is the magnetic flux, and dt is the time taken.
Magnetic flux (Φ) is given as;Φ = B.AWhere A is the area of the coil, and B is the magnetic field strength.Calculation:The area of the wire loop, A = 0.12 m²The magnetic field strength, B = 0.2 T.The magnetic field reverses its direction after 2 s.Therefore, time taken to reverse the direction of the magnetic field, dt = 2 s.
The number of turns in the coil is not given in the question. Therefore, we assume that the number of turns is equal to 1.The magnetic flux, Φ = B.A = 0.2 × 0.12 = 0.024 Wb.Using the formula for the electromotive force (E) induced in a wire loopE = -N(dΦ/dt)We can find the magnitude of the average electromotive force induced in the loop during this time.E = -1 (dΦ/dt)E = -1 (ΔΦ/Δt)Where ΔΦ = Φ2 - Φ1 and Δt = 2 - 0 = 2 s.ΔΦ = Φ2 - Φ1 = B.A2 - B.A1 = 0 - 0.024 = -0.024 Wb
Therefore, E = -1 (ΔΦ/Δt)E = -1 (-0.024/2)E = 0.012 V
Therefore, the magnitude of the average electromotive force induced in the loop during this time is 0.012 V.Answer:Option d. 0.24.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
Paragraph Styles Question 4 A condenser is used to condense substances from gaseous to liquid state, typically by cooling it. In this problem, a stream of humid air (58.0 mol % water), 8.8 mol % O₂ and the remaining N₂ enters a condenser at 150°C. 80% of the water vapor in the humid air is condensed and removed as pure liquid water. Both gas and liquid phase streams leave the condenser at 30°C. Nitrogen (N₂) gas leave the condenser at the rate of 5.18 mol/s. (a) Draw and label a flowchart of the process. (4 marks) 1 (b) Solve the total flow rate of the feed stream and both streams leaving the condenser. (c) Taking [N₂ (g, 30°C), O2 (g, 30°C), and H₂O (g, 30°C)] as reference for enthalpy calculations, prepare and fill in the inlet-outlet enthalpy table and calculate the heat transferred to or from the condenser in kilowatts (Neglect the effects of pressure changes on enthalpies)
(a) Flowchart: A condenser process flowchart is provided, illustrating the inputs and outputs of the humid air stream, O₂, N₂, and the condensed liquid water. (b) Total flow rate: The total flow rate of the feed stream entering the condenser is 5.296F mol/s, considering the flow rates of water vapor, O₂, and N₂. (c) Enthalpy and heat transfer: The enthalpy changes for water vapor and O₂ are calculated, resulting in a heat transfer of -0.072 kF kW, indicating heat removal by the condenser. the heat transferred by the condenser is -0.072 kF kW.
(a) Flowchart:
(b) Total flow rate of the feed stream:
The flow rate of N2 leaving the condenser is given as 5.18 mol/s.
The flow rate of water vapor entering the condenser is 58.0 mol% of F.
80% of the above water vapor is condensed and removed, leaving 20% remaining.
So, 20% of the above water vapor remaining in the humid air after condensation is 0.116F mol/s.
The flow rate of O2 is given as 8.8 mol% of F.
The total flow rate of the feed stream is the sum of the flow rates of water vapor, O2, and N2:
Total flow rate = Flow rate of water vapor + Flow rate of O2 + Flow rate of N2
= 0.116F + 0.088F + 5.18
= 5.296F mol/s
(c) Inlet-Outlet Enthalpy Table:
To calculate the heat transferred by the condenser, we need to determine the enthalpy changes for water vapor (H3 to H4) and O2 (H5).
The enthalpy change for water vapor can be calculated as:
ΔH_vap = Enthalpy of water vapor at 30°C - Enthalpy of water vapor at 150°C
= [40.657 + 0.119 × (30 - 0)] - [40.657 + 0.119 × (150 - 0)]
= -13.607 kJ/kmol
Enthalpy of water leaving the condenser (H4) can be calculated as:
H4 = Enthalpy of water vapor at 30°C = 40.657 kJ/kmol
Enthalpy of O2 leaving the condenser (H5) can be taken as:
H5 = Enthalpy of O2 at 30°C = 0.102 kJ/kmol
The heat transferred by the condenser (q) can be calculated as:
q = Total flow rate × ΔH
= (5.296F mol/s) × (-13.607 kJ/kmol) × 10⁻³ kW/J
= -0.072 kF kW (where kF is the constant conversion factor 10⁶)
Therefore, the heat transferred by the condenser is -0.072 kF kW.
To know more about condenser click here:
https://brainly.com/question/13853336
#SPJ11
Physics
The Gravity Force Fgrav between two objects with masses M1 and
M2 is 100 N. If the separation between them is tripled and the mass
of each object is doubled, what is Fgrav?
When the separation between two objects is tripled and the mass of each object is doubled, the gravitational force between them decreases to (4/9) of its original value. In this case, the force decreases from 100 N to approximately 44.44 N.
The gravitational force between two objects is given by the equation:
Fgrav = G * (M₁ * M₂) / r²,
where G is the gravitational constant, M₁ and M₂ are the masses of the objects, and r is the separation between them.
In this scenario, we have Fgrav = 100 N. If we triple the separation between the objects, the new separation becomes 3r. Additionally, if we double the mass of each object, the new masses become 2M₁ and 2M₂.
Substituting these values into the gravitational force equation, we get:
Fgrav' = G * ((2M₁) * (2M₂)) / (3r)²
= (4 * G * (M₁ * M₂)) / (9 * r²)
= (4/9) * Fgrav.
Therefore, the new gravitational force Fgrav' is (4/9) times the original force Fgrav. Substituting the given value Fgrav = 100 N, we find:
Fgrav' = (4/9) * 100 N
= 44.44 N (rounded to two decimal places).
Hence, the new gravitational force is approximately 44.44 N.
To know more about gravitational constant,
https://brainly.com/question/17239197
#SPJ11
A helicopter lifts a 85 kg astronaut 12 m vertically from the ocean by means of a cable. The acceleration of the astronaut is g/12. How much work is done on the astronaut by (a) the force from the helicopter and (b) the gravitational force on her? Just before she reaches the helicopter, what are her (c) kinetic energy and (d) speed? (a) Number ___________ Units _____________
(b) Number ___________ Units _____________
(c) Number ___________ Units _____________
(d) Number ___________ Units _____________
A helicopter lifts a 85 kg astronaut 12 m vertically from the ocean by means of a cable. The acceleration of the astronaut is g/12.(a)The work done on the astronaut by the force from the helicopter is 85 kg × 9.81 m/s² × 12 m=9930.6 J.(b)the work done on the astronaut by the gravitational force is = -9930.6J(c)Kinetic Energy = 9930.6J(d)v ≈ 15.26 m/s
(a) To calculate the work done on the astronaut by the force from the helicopter, we can use the formula:
Work = Force × Distance
The force from the helicopter can be calculated using Newton's second law:
Force = Mass × Acceleration
Given that the mass of the astronaut is 85 kg and the acceleration is g/12 (where g is the acceleration due to gravity, g = 9.81 m/s²), the force from the helicopter is:
Force = 85 kg × (g/12) m/s²
The displacement of the astronaut is given as 12 m.
Substituting the values into the work equation:
Work = (85 kg × (g/12) m/s²) × 12 m
Simplifying the equation, we have:
Work = 85 kg × g m/s² × 12 m
The units for work are Joules (J).
Therefore, the work done on the astronaut by the force from the helicopter is 85 kg × 9.81 m/s² × 12 m J.
(a) Number: 9930.6
Units: Joules (J)
(b) The work done by the gravitational force can be calculated in the same way. The force of gravity can be calculated as:
Force_gravity = Mass × Acceleration_due_to_gravity
Given that the mass of the astronaut is 85 kg and the acceleration due to gravity is 9.81 m/s², the force of gravity is:
Force_gravity = 85 kg × 9.81 m/s²
Since the displacement is vertical and the force of gravity is acting in the opposite direction to the displacement, the work done by gravity is:
Work_gravity = -Force_gravity × Distance
Substituting the values:
Work_gravity = -(85 kg × 9.81 m/s²) × 12 m
The units for work are Joules (J).
Therefore, the work done on the astronaut by the gravitational force is -(85 kg × 9.81 m/s² × 12 m) J.
(b) Number: -9930.6
Units: Joules (J)
Note: The negative sign indicates that work is done by the gravitational force in the opposite direction to the displacement.
(c) Just before she reaches the helicopter, her potential energy is converted into kinetic energy. Since the work done by the helicopter and the gravitational force cancel each other out, her total mechanical energy (potential energy + kinetic energy) remains constant. Therefore, her potential energy at the start is equal to her kinetic energy just before reaching the helicopter.
Potential Energy = m×g×h
Given that the mass of the astronaut is 85 kg, the acceleration due to gravity is 9.81 m/s², and the height is 12 m, her potential energy is:
Potential Energy = 85 kg × 9.81 m/s² × 12 m
The units for energy are Joules (J).
Therefore, The kinetic energy just before reaching the helicopter is also:
Kinetic Energy = 85 kg × 9.81 m/s² × 12 m J.
(c) Number: 9930.6
Units: Joules (J)
(d) To find her speed just before reaching the helicopter, we can equate her kinetic energy to the formula for kinetic energy:
Kinetic Energy = (1/2)mv²
where m is the mass and v is the speed.
Substituting the values:
9930.6 J = (1/2) × 85 kg × v²
Simplifying the equation:
v² = (2 × 9930.6 J) / (85 kg)
v² = 233.25 m²/s²
Taking the square root of both sides:
v ≈ 15.26 m/s
(d) Number: 15.26
Units: meters per second (m/s)
To learn more about Newton's second law visit: https://brainly.com/question/25545050
#SPJ11
The speed of sound in an air at 20°C is 344 m/s. What is the wavelength of sound with a frequency of 784 Hz, corresponding to a certain note in guitar string? a. 0.126 m b. 0.439 m C. 1.444 m d. 1.678 m
The wavelength of the sound with a frequency of 784 Hz is 0.439 m. So, the correct answer is option b. 0.439 m. To calculate the wavelength of sound, we can use the formula:
wavelength = speed of sound / frequency
Given:
Speed of sound in air at 20°C = 344 m/s
Frequency = 784 Hz
Substituting these values into the formula, we get:
wavelength = 344 m/s / 784 Hz
Calculating this expression:
wavelength = 0.439 m
Therefore, the wavelength of the sound with a frequency of 784 Hz is 0.439 m. So, the correct answer is option b. 0.439 m.
The speed of sound in a medium is determined by the properties of that medium, such as its density and elasticity. In the case of air at 20°C, the speed of sound is approximately 344 m/s.
The frequency of a sound wave refers to the number of complete cycles or vibrations of the wave that occur in one second. It is measured in hertz (Hz). In this case, the sound has a frequency of 784 Hz.
To calculate the wavelength of the sound wave, we use the formula:
wavelength = speed of sound / frequency
By substituting the given values into the formula, we can find the wavelength of the sound wave. In this case, the calculated wavelength is approximately 0.439 m.
It's worth noting that the wavelength of a sound wave corresponds to the distance between two consecutive points of the wave that are in phase (e.g., two consecutive compressions or rarefactions). The wavelength determines the pitch or frequency of the sound. Higher frequencies have shorter wavelengths, while lower frequencies have longer wavelengths
To know more about The wavelength
brainly.com/question/31322456
#SPJ11
A wire 0.15 m long carrying a current of 2.5 A is perpendicular to a magnetic field. If the force exerted on the wire is 0.060 N, what is the magnitude of the magnetic field? Select one: a. 6.3 T b. 16 T c. 2.4 T d. 0.16 T
Answer: option (d) The magnitude of the magnetic field is 0.16 T.
The force on a current-carrying conductor is proportional to the current, length of the conductor, and magnetic field strength.
Force on a current-carrying conductor formula is given by; F = BIL sin θ WhereF is the force on the conductor B is the magnetic field strength, L is the length of the conductor, I is the current in the conductor, θ is the angle between the direction of current and magnetic field.
Length of wire, L = 0.15 m
Current, I = 2.5 A
Force, F = 0.060 N
Using the force on a current-carrying conductor formula above, we can calculate the magnetic field strength
B = F / IL sin θ
The angle between the direction of current and magnetic field is 90°. So, sin θ = 1, Substituting values;
B = 0.060 / 2.5 × 0.15 × 1B
= 0.16 T,
Therefore, the magnitude of the magnetic field is 0.16 T.
Answer: d. 0.16 T.
Learn more about magnetic field: https://brainly.com/question/14411049
#SPJ11
A very large, horizontal, nonconducting sheet of charge has uniform charge per unit area o= 4.6 x 10-12 C/m². A small sphere of mass m= 6.45 x 10-6 kg and charge q is placed 3.9 cm above the sheet of charge and then released from rest. a) If the sphere is to remain motionless when it is released, what must be the value of q? b) What is q if the sphere is released 7.8 cm above the sheet? &q= 8.85 x 10-12 C2/N.m² O a. b) 0.0002432 C b) 0.0001216 C b. a) 0.0012161 C b) 0.0001216 C O c. a) 0.0001216 C b) 0.0002432 C d. a) 0.0012161 C b) 0.0002432 C O e. a) 0.0002432 C b) 0.0002432 C
a) In order for the small sphere to remain motionless when released 3.9 cm above the sheet of charge, its charge q must be 0.0001216 C. b) If the sphere is released 7.8 cm, the value of q should be 0.0002432 C.
a) To determine the charge required for the small sphere to remain motionless when released 3.9 cm above the sheet, we need to consider the electrostatic force acting on the sphere. The force is given by Coulomb's law: F = k * (q * Q) / r^2, where F is the force, k is the electrostatic constant (k = 8.99 x 10^9 N m^2/C^2), q is the charge of the small sphere, Q is the charge density of the sheet (Q = 4.6 x 10^-12 C/m^2), and r is the distance between the sphere and the sheet.
Since the sphere is motionless, the electrostatic force must balance the gravitational force: F = mg, where m is the mass of the sphere and g is the acceleration due to gravity (g = 9.8 m/s^2). Solving these equations, we find q = (m * g * r^2) / (k * Q) = (6.45 x 10^-6 kg * 9.8 m/s^2 * (0.039 m)^2) / (8.99 x 10^9 N m^2/C^2 * 4.6 x 10^-12 C/m^2) ≈ 0.0001216 C.
b) When the sphere is released 7.8 cm above the sheet, we follow a similar process to determine the charge required for the sphere to remain motionless. Using the same equations as in part a, but with r = 0.078 m, we find q = (m * g * r^2) / (k * Q) = (6.45 x 10^-6 kg * 9.8 m/s^2 * (0.078 m)^2) / (8.99 x 10^9 N m^2/C^2 * 4.6 x 10^-12 C/m^2) ≈ 0.0002432 C.
To learn more about charge, Click here: brainly.com/question/13871705
#SPJ11
What is the escape speed from an asteroid of diameter 395 km with a density of 2180 kg/m³ ? ►View Available Hint(s) k
The escape speed from an asteroid with a diameter of 395 km and a density of [tex]2180 kg/m^3[/tex] is approximately 2.43 km/s.
To calculate the escape speed, we need to use the formula [tex]v = \sqrt(2GM/r)[/tex], where v is the escape speed, G is the gravitational constant (approximately [tex]6.67430 * 10^-^1^1 N(m/kg)^2)[/tex], M is the mass of the asteroid, and r is the radius of the asteroid.
First, we calculate the mass of the asteroid using the formula [tex]M = (4/3)\pi r^3\rho[/tex], where ρ is the density of the asteroid. Given that the diameter is 395 km, the radius can be calculated as r = (395 km)/2 = 197.5 km. Converting the radius to meters, we have r = 197,500 m. Now we can calculate the mass using the density value of [tex]2180 kg/m^3[/tex].
Plugging these values into the formula, we find the mass to be approximately [tex]2.754 * 10^2^0[/tex] kg. Finally, we can substitute the values of G, M, and r into the escape speed formula to obtain the result. The escape speed from the asteroid is approximately 2.43 km/s.
Learn more about escape speed here:
https://brainly.com/question/28608063
#SPJ11
a ball rolls of a table that 1.2 meter above the ground.
how much time does it take for the ball to hit the ground
how far from the table does the ball hit the ground
The ball will hit the ground 1.2 m away from the table. Therefore, the ball will hit the ground in 0.49 s and 1.2 m away from the table.
Given that the height of the table above the ground is 1.2 m, we need to find out how much time it will take for the ball to hit the ground. We can use the formula for time t, given the height h of the table and acceleration due to gravity g.t = sqrt(2h/g)t = sqrt(2 × 1.2/9.8) = 0.49 s.
Therefore, the ball will hit the ground in 0.49 s.Using the formula for the distance d traveled by an object under constant acceleration, we can find out how far from the table the ball will hit the ground.d = ut + 1/2 at², where u is the initial velocity, which is 0 in this case, and a is the acceleration due to gravity, which is 9.8 m/s²d = 0 × 0.49 + 1/2 × 9.8 × 0.49²d = 1.2 mTherefore, the ball will hit the ground 1.2 m away from the table. Therefore, the ball will hit the ground in 0.49 s and 1.2 m away from the table.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
Two point charges of Q, coulombs each are located at (0, 0, 1) and (0.0, -1). Determine the locus of the possible positions of a third charge Q2 where Q2 may be any positive or negative value, such that the total field E = 0 at (0,1,0). What is the locus if the two original charges are 21 and -2,2
The locus of possible positions for the third charge Q2, given Q1 = 21 C and Q2 = -2.2 C, is represented by two separate curves on a graph, determined by the equation r2 = sqrt((2.2 * r1^2) / 21).
Given two point charges of magnitude Q at specific positions, the task is to determine the locus (possible positions) of a third charge Q2, such that the total electric field at a specific point is zero.
This locus represents the positions where the net electric field due to the two charges cancels out. The specific scenario is when the original charges are 21 and -2,2.
To find the locus of the possible positions of the third charge, we need to consider the electric field due to the two original charges. The electric field at any point due to a point charge is given by Coulomb's Law: E = k * (Q / r^2), where E is the electric field, k is the electrostatic constant, Q is the charge, and r is the distance from the charge.
For the total electric field to be zero at the point (0,1,0), the electric field vectors due to the two charges must have equal magnitudes but opposite directions. By setting up the equations for the electric fields due to each charge and considering their magnitudes and directions, we can determine the locus of possible positions for the third charge Q2.
Specifically, if the original charges are 21 and -2,2, the locus of possible positions for the third charge Q2 can be found by solving the equations derived from Coulomb's Law with the given charge magnitudes and positions. By solving these equations, we can determine the specific coordinates that satisfy the condition of zero net electric field at the point (0,1,0).
It is important to note that the complete mathematical derivation and calculation of the locus would require solving the equations explicitly using the given charge values and positions.
Learn more about charge here:
https://brainly.com/question/13871705
#SPJ11
Two spaceships are moving away from Earth in opposite directions, one at 0.83*c, and one at 0.83*c (as viewed from Earth). How fast does each spaceship measure the other one going? (please answer in *c).
The first spaceship heads to a planet 10 light years from Earth. Observers on Earth thus see the trip taking 12.04819 years. How long do people aboard the first spaceship measure the trip? (please answer in years)
The speed at which each spaceship measures the other one moving can be calculated using the relativistic velocity addition formula. The duration of the trip as measured by people aboard the first spaceship can be determined using time dilation formula.
According to special relativity, the relativistic velocity addition formula states that the velocity of one object as measured by another object is given by v' = (v + u) / (1 + vu/c^2), where v is the velocity of the object being measured, u is the velocity of the observer, and c is the speed of light.
For the first spaceship, its velocity as measured by observers on Earth is 0.83*c. Using the relativistic velocity addition formula, we can calculate the velocity at which the first spaceship measures the second spaceship. Plugging in v = 0.83*c and u = 0.83*c, we get v' = (0.83*c + 0.83*c) / (1 + 0.83*0.83) = 1.27*c. Similarly, the velocity at which the second spaceship measures the first spaceship can be calculated as 1.27*c.
Regarding the duration of the trip, time dilation occurs when an object is moving relative to an observer. The time dilation formula states that the dilated time (T') is related to the proper time (T) by T' = T / √(1 - v^2/c^2), where v is the velocity of the moving object and c is the speed of light.
In this case, the trip from Earth to the planet takes 12.04819 years as measured by observers on Earth (proper time). To find the duration of the trip as measured by people aboard the first spaceship, we can use the time dilation formula. Plugging in T = 12.04819 years and v = 0.83*c, we can calculate T', which represents the time measured by people aboard the first spaceship.
Learn more about spaceship here:
https://brainly.com/question/14198872
#SPJ11
Helppppppp :((((((
:((((((
Answer:
b is the equivalent
do u want explanation
What is the terminal velocity of a ball if:
Earth (g=9.8 m/s2)
Glycerine (Viscous Liquid)
Jar Diameter: 7.0 cm
Ball Diamater: 7.0 mm
Distabce between point A and B =60 cm
Density of the Liquid= 1260 (o) kg/m3
Density of the Glass Ball= 2600 (p) Kg/m
Time: 19 mins 772 seconds
The terminal velocity of the ball is 0.000242 m/s. An item falling through a fluid at its greatest speed is said to have reached its terminal velocity. When the combined drag and buoyancy forces are equal to the force of gravity pulling the item downward, it is seen.
Earth (g=9.8 m/s2)Glycerine (Viscous Liquid) Jar Diameter: 7.0 cm, Ball Diameter: 7.0 mm Distabce between point A and B =60 cmDensity of the Liquid= 1260 (o) kg/m3 Density of the Glass Ball= 2600 (p) Kg/mTime: 19 mins 772 seconds. The formula to calculate the terminal velocity of an object is given byvt = [(2mg)/(ρACd)]^0.5
where,vt = Terminal Velocitym = mass of the objectρ = density of the fluidA = projected area of the objectCd = Drag coefficientg = acceleration due to gravity, When the object reaches its terminal velocity, the net force on the object becomes zero, and it moves with a constant speed. Here, the acceleration of the ball is zero when the ball reaches terminal velocity.
So, the net force acting on the ball is zero.Therefore, the forces acting on the ball are:Weight = mgBuoyant Force = ρgV SubmergedArchimedes' principle states that any object wholly or partially submerged in a fluid experiences an upward buoyant force equal in magnitude to the weight of the fluid displaced
by the object.m = (4/3)πr³p = (4/3)π(0.35×10⁻²)³×2600 = 0.005 kg
Volume of the submerged ball, Vsub = (4/3)πr³ = (4/3)π(0.35×10⁻²)³ = 1.179×10⁻⁵ m³Density of the glycerine, ρ = 1260 kg/m³Weight of the ball, W = mg = 0.005×9.8 = 0.049 NThe buoyant force acting on the ball is given byB = ρgVsubmerged = 1260×9.8×1.179×10⁻⁵ = 0.015 NThe net force on the ball is F = B - W = 0.015 - 0.049 = -0.034 NAs the ball is moving upwards, the direction of the net force is upwards, so it opposes the motion of the ball. Hence, the acceleration of the ball is negative, and the speed of the ball decreases.After a certain time, the speed of the ball becomes zero, which is the terminal velocity of the ball. This happens when the net force on the ball becomes zero, that is when the weight of the ball is equal to the buoyant force acting on it. Hence,W = B0.049 = 0.015We know that terminal velocity, vt = [(2mg)/(ρACd)]^0.5As the ball is moving upwards, the direction of the net force is upwards, so it opposes the motion of the ball. Hence, acceleration of the ball is negative and the speed of the ball decreases till the terminal velocity is reached.Let's assume that the ball reaches its terminal velocity v, and its cross-sectional area is A.
Then, the weight of the ball
mg = W = ρliquid × Vsubmerged × g + ρball × Vball × g.0.005×9.8 = 1260 × 9.8×1.179 × 10⁻⁵ × g + 2600 × (4/3)π(0.35×10⁻²)³/8×g.= 0.015×g + 0.0028×g= 0.0178×gg = 0.005/0.0178 = 0.281 kg/m³The value of drag coefficient depends on the shape of the object, the viscosity of the fluid, and the roughness of the surface of the object. For a smooth sphere in a viscous fluid, the value of Cd is around 0.47.
Hence,Cd = 0.47vt = [(2mg)/(ρACd)]^0.5= [(2×0.005×0.281×9.8)/(1260×π(0.35×10⁻²)²×0.47)]^0.5= 0.000242 m/s.
To know more about terminal velocity
https://brainly.com/question/2654450
#SPJ11
Which of the following functions are in the Hilbert space with indicated interval? (a) f(x) = eᶦπˣ, -1≤x≤1 (b) f(x) = e⁻ˣ, x ≥0
(c) f(x) = x⁻¹/⁴, 0 ≤x≤1 (d) f(x) = cos(x), -π ≤ x ≤ π (e) f(x) = 1/(1+ ix), - [infinity] < x < [infinity] (f) f(x) = x⁻¹/², 0 ≤x≤1
All the given functions that are
(a) f(x) = eᶦπˣ, -1≤x≤1
(b) f(x) = e⁻ˣ, x ≥0
(c) f(x) = x⁻¹/⁴, 0 ≤x≤1
(d) f(x) = cos(x), -π ≤ x ≤ π
(e) f(x) = 1/(1+ ix), - [infinity] < x < [infinity] (f) f(x) = x⁻¹/², 0 ≤x≤1 belong to the Hilbert space with the indicated interval.
A function is said to be in the Hilbert space with a given interval when it satisfies the requirements for Hilbert spaces. The terms Hilbert space, interval, and functions will be explained first.
A Hilbert space is an infinite-dimensional vector space that is equipped with an inner product, a scalar product. The space is complete and satisfies a certain set of properties, which include an orthonormal basis.
An interval is the set of all real numbers between two endpoints. It can be closed, such as [a, b], which includes the endpoints, or open, such as (a, b), which excludes them.
A half-open interval is one that includes one endpoint but excludes the other. For example, [a, b) and (a, b] are half-open intervals, while (a, b) is an open interval.
A function is a relationship between two sets of values. It is a rule or mapping that assigns one input value to one output value. In mathematics, a function is represented by f(x).
f(x) = eᶦπˣ, -1≤x≤1: It is in the Hilbert space.
f(x) = e⁻ˣ, x ≥0: It is in the Hilbert space.
f(x) = x⁻¹/⁴, 0 ≤x≤1: It is in the Hilbert space.
f(x) = cos(x), -π ≤ x ≤ π: It is in the Hilbert space.
f(x) = 1/(1+ ix), - [infinity] < x < [infinity]: It is in the Hilbert space.
f(x) = x⁻¹/², 0 ≤x≤1:It is in the Hilbert space.
All the given functions belong to the Hilbert space with the indicated interval.
Learn more about functions https://brainly.com/question/11624077
#SPJ11