The change in momentum is -0.918 kg m/s.
The ball's momentum before hitting the ground is zero since the ball is at rest, and its velocity is zero.
It falls from a height of 2.2m above the ground, and its gravitational potential energy transforms into kinetic energy as it falls. Hence, using the law of conservation of energy;
mgh = (1/2)mv²where; m = 0.140 kg, g = 9.81 m/s², h = 2.2m, and the velocity (v) of the ball is obtained by rearranging the equation v² = 2ghv² = 2 × 9.81 × 2.2v² = 43.092v = √43.092v = 6.562 m/sThe velocity is positive since it falls downwards; thus, the direction of the velocity is downward, but it is positive.
Therefore, when it rebounds, the velocity is reversed, but the momentum is conserved. The momentum is given by;p = mvHence, the momentum of the ball before hitting the ground is;p = mv = 0.140 kg × 0 = 0 kg m/s (initial momentum)
When the ball hits the ground, it rebounds to a height of 1.6 m; thus, the change in momentum of the ball can be determined using the principle of conservation of momentum which states that the momentum of an object before a collision is equal to the momentum of the object after the collision.
The momentum of the ball after rebounding can be determined using the formula;p = mvSince the velocity of the ball is reversed, the velocity is negative. The mass remains constant.
Thus, the momentum after rebounding can be determined as follows; p = -mv = -0.140 kg × 6.562 m/s = -0.918 kg m/s (final momentum)
The change in momentum is;
p final - p initial = -0.918 kg m/s - 0 kg m/s = -0.918 kg m/s.
To learn about momentum here:
https://brainly.com/question/18798405
#SPJ11
compare transportation in the past and present
Answer:
In the past, the primary means of transportation was walking or riding on horses, carriages, or boats. Now, we use the same methods of transportation, but we have added planes, trains, automobiles, and jet skis. With the advancement of technology, we have faster and more efficient ways of getting from one place to another. Additionally, electric vehicles are becoming more available and popular. Cars are fueled by more efficient and fuel-efficient engines, and planes are powered by more efficient engines, allowing for longer haul flights. Public transportation has also improved over the years, making it easier to get to and from destinations.
Explanation:
Match each of the following lapse rates with the appropriate
condition for which they should be used. Each answer is used only
once.
a. Normal/environmental lapse rate (NLR/ELR; 3.5°F/1,000 ft)
b. Dr
The normal or average lapse rate is called the environmental lapse rate (ELR). It's the standard rate at which the temperature decreases with height in the troposphere. The average ELR is -6.5°C per kilometer or -3.5°F per 1,000 feet
The question refers to matching the correct lapse rate with the condition for which they are applied. Here are the lapse rates and the appropriate conditions:
Normal/Environmental Lapse Rate (NLR/ELR; 3.5°F/1,000 ft) - It is used to calculate the average temperature decrease in the troposphere, which is -6.5°C or -3.5°F per 1000 feet of altitude.
Dry Adiabatic Lapse Rate (DALR; 5.5°F/1,000 ft) - This is the rate at which unsaturated air masses decrease their temperature with an increase in altitude. It is applicable in dry air conditions.
Wet Adiabatic Lapse Rate (WALR; 3.3°F/1,000 ft) - It is used to calculate the rate at which saturated air cools as it rises. This rate varies depending on the amount of moisture in the air.Therefore, the main answer is to match the given lapse rates with the appropriate condition for which they should be used. The lapse rates include the Normal/Environmental Lapse Rate (NLR/ELR), Dry Adiabatic Lapse Rate (DALR), and Wet Adiabatic Lapse Rate (WALR).
The change of temperature with height is called the lapse rate. Lapse rates come in various forms, and each has its application. A lapse rate is a measure of how temperature changes with height in the Earth's atmosphere. When the temperature decreases with height, it is referred to as the environmental lapse rate (ELR). The ELR is calculated by dividing the decrease in temperature by the increase in height. In contrast, the dry adiabatic lapse rate (DALR) is the rate at which the temperature of a parcel of unsaturated air decreases as it ascends. When a parcel of unsaturated air rises, it expands adiabatically (without exchanging heat with the surrounding air). The expanding parcel of air cools at the DALR rate. The DALR for unsaturated air is 5.5°F per 1,000 feet.
Wet adiabatic lapse rate (WALR) is the rate at which the temperature of a saturated parcel of air decreases as it rises. This rate varies depending on the amount of moisture in the air. As an air mass rises and cools, the moisture in it will eventually condense to form clouds. The heat released during this process offsets some of the cooling, causing the temperature to decrease at a lower rate, which is the WALR. The WALR is around 3.3°F per 1,000 feet.
Finally, the normal or average lapse rate is called the environmental lapse rate (ELR). It's the standard rate at which the temperature decreases with height in the troposphere. The average ELR is -6.5°C per kilometer or -3.5°F per 1,000 feet. It is used to calculate the average temperature decrease in the troposphere.
There are three different types of lapse rates, and each one is used to calculate temperature changes with height in the atmosphere under different conditions. The ELR, DALR, and WALR are calculated to determine the rate at which air temperature changes with altitude.
To know more about troposphere visit:
brainly.com/question/30582167
#SPJ11
A copper wire used for house hold electrical outlets has a radius of 2.0 mm (1mm = 10³m). Each Copper atom donates one electron for conduction. If the electric current in this wire is 15 A. copper density is 8900 kg/m³ and its atomic mass is 64 u, (lu = 1.66 x 10-27 kg), the electrons drift velocity Va in this wire is a) 2.11 x 10-4 m/s. b) 2.85 x 10-4 m/s. c) 8.91 x 10-5 m/s, d) 1.14 x 10-4 m/s. e) 4.56 x 10-5 m/s, f) None of the above.
The drift velocity (Va) of electrons in the copper wire can be calculated using the formula Va = I / (nAe), In this case, with a given current of 15 A and the properties of copper, the drift velocity is approximately 8.91 x 10^-5 m/s (option c).
The drift velocity of electrons in a wire is the average velocity at which they move in response to an applied electric field. It can be calculated using the formula Va = I / (nAe), where I is the current flowing through the wire, n is the number of charge carriers per unit volume, A is the cross-sectional area of the wire, and e is the charge of an electron.
In this case, the current is given as 15 A. The number of charge carriers per unit volume (n) can be determined using the density of copper (ρ) and its atomic mass (m). Since each copper atom donates one electron for conduction, the number of charge carriers per unit volume is n = ρ / (mN_A), where N_A is Avogadro's number.
The cross-sectional area of the wire (A) can be calculated using the radius (r) of the wire, which is given as 2.0 mm. The area is A = πr^2. By substituting the given values into the formula, we can calculate the drift velocity Va, which comes out to be approximately 8.91 x 10^-5 m/s. Therefore, option c is the correct answer.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
The electromagnetic (EM) spectrum consists of different types of such as gamma rays, X-rays, ultraviolet radiation, " visible light, and according to its_ from 2. The EM spectrum is arranged high to low frequency and_ from short to long wavelength. At high-frequency, the wavelength is_ 3. The high-frequency or_ EM waves are more energetic and are more able to penetrate than the low-frequency waves. Therefore, the more details it can resolve in probing a material. 4. As _increases, the appearance of EM energy becomes dangerous to human beings. a. Microwave ovens, for example, can pose a hazard (internal heating of body tissues), if not properly shielded. b. Moreover, X-rays can damage cells, which may lead to cancer and cell death. 5. Although the wave radiations in the EM spectrum are differ in terms of their means of production and properties, they have some common features like; a. are In the EM radiations, the oscillating perpendicular to each other. b. In the EM radiations, both the electric and magnetic fields oscillate are perpendicular to the C. All EM waves are in nature.
1. The electromagnetic (EM) spectrum consists of different types of waves such as gamma rays, X-rays, ultraviolet radiation, visible light, and radio waves, according to their frequencies.
2. The EM spectrum is arranged from high to low frequency and from short to long wavelength. At high frequencies, the wavelength is shorter and low frequencies the wavelength is wider.
3. False. High-frequency EM waves are more energetic and are able to penetrate more than low-frequency waves. Therefore, they can resolve more details when probing a material.
High-frequency EM waves have shorter wavelengths and higher energy, but their ability to penetrate materials depends on the specific characteristics of those materials. In general, higher-frequency waves tend to interact more strongly with matter and may be more easily absorbed or scattered, resulting in less penetration.
4. As frequency increases, the appearance of EM energy becomes more dangerous to human beings.
a. Microwave ovens can pose a hazard if not properly shielded, as they can cause internal heating of body tissues.
b. X-rays can damage cells, which may lead to cancer and cell death.
5. Although the wave radiations in the EM spectrum differ in terms of their means of production and properties, they have some common features.
a. In EM radiations, the electric and magnetic fields oscillate perpendicular to each other.
b. In EM radiations, both the electric and magnetic fields oscillate perpendicular to the direction of wave propagation.
c. All EM waves are transverse in nature.
All electromagnetic waves are transverse waves, meaning that the oscillations of the electric and magnetic fields occur perpendicular to the direction of wave propagation.
Learn more about Electromagnetic Spectrum:
https://brainly.com/question/13803241
#SPJ4
Which is more efficient, a toaster that converts 95% of the
energy it receives to heat or an incandescent light bulb which ALSO
converts 95% of its energy to heat? Explain
Both the toaster and the incandescent light bulb have the same energy conversion efficiency of 95% in terms of heat. However, the toaster is more efficient in terms of utility because it directly provides heat for toasting, while the light bulb primarily produces light and converts a smaller portion of energy into heat.
Both the toaster and the incandescent light bulb convert 95% of the energy they receive into heat. However, the key difference lies in their intended purpose and utility.
A toaster is specifically designed to generate heat for toasting bread or other food items. Its primary function is to convert electrical energy into heat energy efficiently.
Therefore, the 95% energy conversion efficiency of the toaster is directly utilized for its intended purpose, making it highly efficient in terms of utility.
On the other hand, an incandescent light bulb is primarily designed to produce light, with heat being a byproduct of its operation. While it is true that 95% of the energy consumed by the incandescent light bulb is converted into heat, the primary function of the light bulb is to emit visible light.
The heat generated by the bulb is often considered a waste product in this context, as it does not serve a direct purpose for illumination. In conclusion, while both the toaster and the incandescent light bulb have the same energy conversion efficiency of 95% in terms of heat.
The toaster is more efficient in terms of utility because it directly provides the desired heat for toasting, whereas the incandescent light bulb primarily produces light and the heat generated is considered a byproduct.
Learn more about energy here ;
https://brainly.com/question/30672691
#SPJ11
An undamped 2.85 kg horizontal spring oscillator has a spring constant of 30.7 N/m. While oscillating, it is found to have a speed of 3.95 m/s as it passes through its equilibrium position
. What is its amplitude of oscillation?
What is the oscillator's total mechanical energy tot as it passes through a position that is 0.556 of the amplitude away from the equilibrium position?
a) Amplitude of oscillation = 1.2226 m
b) Total mechanical energy of the oscillator as it passes through the position 0.556 of the amplitude away from the equilibrium position is 9.863 J.
The amplitude of oscillation is given by;
A = x = Vm/ω, where;
Vm = maximum velocity of oscillation
ω = angular frequency of oscillation
Given that the spring oscillator has a speed of 3.95 m/s while oscillating. The angular frequency is given by;
ω = sqrt(k/m)
where;
m = mass of spring oscillator
k = spring constant
ω = sqrt(30.7/2.85) = 3.2276 rad/s
Now we can calculate the amplitude;
A = x = Vm/ω= 3.95/3.2276= 1.2226 m
Now, the total mechanical energy at a position that is 0.556 of the amplitude away from the equilibrium position is given by;
E = KE + PE
Since the spring oscillator has no damping;
E = KE + PE
= 1/2 mv² + 1/2 kx²
Substituting the given values;
E = 1/2 * 2.85 * 3.95² + 1/2 * 30.7 * (0.556 * 1.2226)²
E = 9.863 J
To learn more about amplitude, refer:-
https://brainly.com/question/9525052
#SPJ11
Body is moving with speed of 40km/ m one sec later its is moving at 58 km/h find its acceleration
A student pushes on a 5-kg box with a force of 20 N forward. The force of sliding friction is 10 N backward. What’s the acceleration of the box?
The acceleration of the box is 2 m/s².
To determine the acceleration of the box, we need to consider the net force acting on it. The net force is the vector sum of all the forces acting on the box.
In this case, the force applied by the student is 20 N forward, while the force of sliding friction is 10 N backward. Since the forces are in opposite directions, we need to subtract the frictional force from the applied force to find the net force:
Net force = Applied force - Frictional force
= 20 N - 10 N
= 10 N
Now, we can apply Newton's second law of motion, which states that the acceleration of an object is directly proportional to the net force applied and inversely proportional to its mass.
Net force = mass * acceleration
Rearranging the equation to solve for acceleration, we have:
Acceleration = Net force / mass
= 10 N / 5 kg
= 2 m/s²
Therefore, the acceleration of the box is 2 m/s².
For more questions on force, click on:
https://brainly.com/question/12785175
#SPJ8
A
current of 5A passes along the axis of a cylinder of 5cm radius.
What is the flux density at the surface of the cylinder?
A current of 5A passes along the axis of a cylinder of 5cm radius. The flux density at the surface of the cylinder is 2 × 10^-6 Tesla (T).
To calculate the flux density at the surface of the cylinder, we can use Ampere's law, which relates the magnetic field generated by a current-carrying conductor to the current passing through it.
The formula for the magnetic field generated by a current-carrying wire at a radial distance from the wire is given by:
B = (μ₀ × I) / (2π × r)
Where:
B is the magnetic field (flux density)
μ₀ is the permeability of free space (4π × 10^-7 T·m/A)
I is the current passing through the wire
r is the radial distance from the wire
In this case, the current passing through the cylinder is 5 A, and we want to calculate the flux density at the surface of the cylinder, which has a radius of 5 cm (0.05 m).
Plugging the values into the formula, we get:
B = (4π × 10^-7 T·m/A × 5 A) / (2π × 0.05 m)
Simplifying the expression:
B = (2 × 10^-7 T·m) / (0.1 m)
B = 2 × 10^-6 T
Therefore, the flux density at the surface of the cylinder is 2 × 10^-6 Tesla (T).
To learn more about flux density visit: https://brainly.com/question/16234377
#SPJ11
a 380-kg piano slides 2.9 m down a 25 degree incline and it kept from accelerating by a man who is pushing back on it parallel to the incline. Determine (a) the force exerted by the man, (b) the work done on the piano by the man, (c) the work done on the the piano by the force of gravity, (d) the net work done on the piano. Ignore friction.
a) The force exerted by the man is approximately 1608.86 N.
b) The work done on the piano by the man is approximately 4662.34 Joules.
c) The work done on the piano by the force of gravity is approximately 7210.18 Joules.
d) The net work done on the piano is approximately 11872.52 Joules.
To solve this problem, we'll need to consider the forces acting on the piano and the work done by each force.
Mass of the piano (m): 380 kg
Distance traveled down the incline (d): 2.9 m
Incline angle (θ): 25 degrees
Acceleration due to gravity (g): 9.8 m/s²
(a) The force exerted by the man:
The force exerted by the man is equal in magnitude and opposite in direction to the force of gravity component parallel to the incline. This force is given by:
F_man = m * g * sin(θ)
Substituting the values:
F_man = 380 kg * 9.8 m/s² * sin(25°)
F_man ≈ 1608.86 N
(b) The work done on the piano by the man:
The work done by a force is given by the equation:
Work = Force * Distance * cos(θ)
Since the force exerted by the man is parallel to the displacement, the angle between the force and displacement is 0 degrees, and the cos(0°) = 1. Therefore, the work done by the man is:
Work_man = F_man * d
Substituting the values:
Work_man = 1608.86 N * 2.9 m
Work_man ≈ 4662.34 J
(c) The work done on the piano by the force of gravity:
The force of gravity acting on the piano has a component parallel to the incline, given by:
F_gravity_parallel = m * g * sin(θ)
The work done by the force of gravity is:
Work_gravity = F_gravity_parallel * d
Substituting the values:
Work_gravity = 380 kg * 9.8 m/s² * sin(25°) * 2.9 m
Work_gravity ≈ 7210.18 J
(d) The net work done on the piano:
The net work done on an object is the sum of the work done by all the forces acting on it. In this case, since there are only two forces (force exerted by the man and force of gravity), the net work done on the piano is:
Net work = Work_man + Work_gravity
Substituting the values:
Net work = 4662.34 J + 7210.18 J
Net work ≈ 11872.52 J
To know more about gravity
https://brainly.com/question/31321801
#SPJ11
What is the starting angular velocity of an elementary particle in the following circumstance? The particle moves through a radius of 4.2 m with an angular acceleration of 1.32 rad/s2. The process ends with a linear velocity of 28.2 m/s and takes 6.1 seconds to complete.
The starting angular velocity of the elementary particle can be determined. Therefore, the starting angular velocity of an elementary particle in the following circumstance is 0 rad/s.
The relationship between linear velocity (v), angular velocity (ω), and radius (r) is given by the equation v = ωr. From the given information, we know the linear velocity at the end of the process is 28.2 m/s and the radius is 4.2 m. Therefore, we can calculate the final angular velocity using the equation v = ωr.
v = ωr
28.2 = ω * 4.2
To find the starting angular velocity, we need to consider the angular acceleration and the time taken to complete the process. The equation relating angular acceleration (α), time (t), and angular velocity (ω) is ω = ω0 + αt, where ω0 is the initial angular velocity.
Using the given information, we have α = 1.32 rad/s^2 and t = 6.1 s. By rearranging the equation, we can solve for ω0:
ω = ω0 + αt
28.2 = ω0 + (1.32 * 6.1)
By substituting the values and solving for ω0, we can determine the starting angular velocity of the elementary particle in this circumstance.
Therefore, the starting angular velocity of an elementary particle in the following circumstance is 0 rad/s.
Learn more about angular velocity here:
https://brainly.com/question/32217742
#SPJ11
In a piston-cylinder arrangement air initially at V=2 m3, T=27°C, and P=2 atm, undergoes an isothermal expansion process where the air pressure becomes 1 atm. How much is the heat transfer in kj? O 277 0 288 0 268 O 252
Given the
initial volume V = 2 m³,
initial temperature T = 27°C,
initial pressure P = 2 atm and
final pressure P₁ = 1 atm.
Now, according to the first law of thermodynamics:
ΔU = Q - Where, ΔU = change in internal energy
Q = heat transfer
W = work done
So, we can write as
Q = ΔU + Where, ΔU = nCVΔT (For an isothermal process, ΔT = 0)ΔU = 0
So,Q = W
Now, for an isothermal process of an ideal gas:
PV = nRT
We know that
T = P.V/n.R = 2 × 2 / (n × 0.0821) = 48.8/n...…(1)
For initial state:
PV = nRT2 × P × V = n × R × T
For final state:
PV₁ = nRTV/V₁ = P₁/P = 2/1 = 2n = (2 × P × V) / RTn = (2 × 2 × 2) / (0.0821 × 300) = 19.92 moles
So, the heat transfer for the given isothermal process will be
Q = W = -nRT ln (P₁/P) = -19.92 × 0.0821 × 300 ln (1/2) = 273.2 J= 0.2732 kJ
Therefore, the correct option is 0.2732.
Learn more about isothermal process here
https://brainly.com/question/12023162
#SPJ11
A raft is made of 15 logs lashed together. Each is 41 cm in diameter and has a length of 6.4 m. specific gravity of wood is 0.60. Express your answer using two significant figures.
The weight of the raft is approximately 4750 kg.
To find the weight of the raft, we need to calculate the total volume of the logs and then multiply it by the specific gravity of wood.
The volume of each log can be calculated using the formula for the volume of a cylinder:
V = π[tex]r^{2h}[/tex]
where r is the radius (half of the diameter) and h is the length of the log.
Given that the diameter of each log is 41 cm, the radius is 20.5 cm or 0.205 m, and the length of the log is 6.4 m.
Substituting these values into the volume formula, we get:
V = π[tex](0.205)^{2}[/tex] × 6.4
Calculating this expression, we find:
V ≈ 0.528 [tex]m^{3}[/tex]
Since there are 15 logs in the raft, the total volume of the logs is:
Total Volume = 15 × 0.528 ≈ 7.92 [tex]m^{3}[/tex]
Now, we can calculate the weight of the raft using the specific gravity of wood. The specific gravity is defined as the ratio of the density of the wood to the density of water, which is 1. The specific gravity of wood is given as 0.60.
Weight of the raft = Total Volume × Specific Gravity × Density of Water
Weight of the raft ≈ 7.92 [tex]m^{3}[/tex] × 0.60 × 1000 kg/[tex]m^{3}[/tex] (density of water)
Calculating this expression, we find:
Weight of the raft ≈ 4750 kg
Therefore, the weight of the raft is approximately 4750 kg.
Learn more about gravity here:
https://brainly.com/question/31321801
#SPJ11
A long straight wire has a current of 18.0 A flowing upwards. An electron is traveling parallel to the wire, in the same direction as the current, and at a speed of 125,000 m/s. If the electron is 15.0 cm from the wire, what is the magnitude and direction of the magnetic force on the moving electron?
Hence, the magnitude of the magnetic force acting on the electron is 5.12 × 10^-14 N and its direction is in the right-hand direction.
When a current-carrying wire is placed in a magnetic field, it experiences a force. The right-hand rule for magnetic force can be used to determine the direction of the force. When a current-carrying wire is placed in a magnetic field, it experiences a force. The right-hand rule for magnetic force can be used to determine the direction of the force. The direction of the force is perpendicular to both the magnetic field and the current in the wire.
Given:
The current in the wire is 18.0 A flowing upwards.
The electron is traveling parallel to the wire, in the same direction as the current, and at a speed of 125,000 m/s.
The electron is 15.0 cm from the wire.
Force experienced by the electron moving with velocity v and charge q in a magnetic field B is given by the formula:F = q(v×B)
Here, q = -1.6 × 10^-19 C, v = 125,000 m/s, and B is given by B = μ₀I/2πr
μ₀ = 4π×10^-7 Tm/A
The magnitude of magnetic force on the electron is given as:F = (1.6 × 10^-19 C) × (125,000 m/s) × [4π×10^-7 Tm/A × 18.0 A/(2π × 0.15 m)]
F = 5.12 × 10^-14 N
As the direction of the current in the wire is upwards and the electron is traveling parallel to the wire, in the same direction as the current, so the direction of the magnetic force on the electron will be in the right-hand direction.
Hence, the magnitude of the magnetic force acting on the electron is 5.12 × 10^-14 N and its direction is in the right-hand direction.
To know more about magnetic field visit:
https://brainly.com/question/31743819
#SPJ11
How much energy, in joules, is released when 70.00 {~kg} of hydrogen is converted into helium by nuclear fusion?
Therefore, 5.95 × 10²⁰ J of energy is released when 70.00 kg of hydrogen is converted into helium by nuclear fusion.
The nuclear fusion of 70 kg of hydrogen to helium releases 5.95 × 10²⁰ J of energy. In order to determine how much energy is released when 70.00 kg of hydrogen is converted into helium through nuclear fusion, one can use the equationE=mc².
Here, E is the energy released, m is the mass lost during the fusion reaction, and c is the speed of light squared (9 × 10¹⁶ m²/s²).The amount of mass lost during the reaction can be calculated using the equation:Δm = (m_initial - m_final)Δm = (70 kg - 69.96 kg) = 0.04 kg.
Substituting the values in the first equation:
E = (0.04 kg) × (3 × 10⁸ m/s)²E = 3.6 × 10¹⁷ J, This is the amount of energy released by the fusion of 1 kg of hydrogen.
Therefore, to find the total energy released by the fusion of 70.00 kg of hydrogen, we must multiply the amount of energy released by the fusion of 1 kg of hydrogen by 70.00 kg of hydrogen:E_total = (3.6 × 10¹⁷ J/kg) × (70.00 kg)E_total = 2.5 × 10²⁰ J. Therefore, 5.95 × 10²⁰ J of energy is released when 70.00 kg of hydrogen is converted into helium by nuclear fusion.
Learn more about nuclear fusion
https://brainly.com/question/14019172
#SPJ11
The figure below shows a bird feeder that weighs 129.9 N. The feeder is supported by a vertical wire, which is in turn tied to two wires, each of which is attached to a horizontal support. The Ieft wire makes a 60 ∘
angle with the support, while the right wire makes a 30 ∘
angle. What is the tension in each wire (in N)? Consider the figure below. (1) (a) Find the tension in each cable supporting the 517−N cat burolar. (Assume the anole θ of the inclined cable is 31.0 ∘
) inclined cable horizontal cable Your response differ from the correct anower by more than 10%. Doutie ched your calculations. N vertical cable N (b) Suppose the horizontal cable were reattached hipher up on the wall. Would the tension in the indined cable increase, decrea or stay the same?
a) The free-body diagram of the bird feeder is shown below.
Bird feeder free-body diagram
Thus, the equation of forces in the horizontal direction is
T (left) cos60° + T (right) cos30°
= 0.5T (left) + 0.866T (right) = 0 ..... (1)
The vertical forces equation is
N - 129.9 N - T (left) sin60° - T (right) sin30° = 0
N = 129.9 N + 0.5T (left) + 0.5T (right) ..... (2)
From equation (1)
T (left) = -1.732T (right)
Substitute the above relation in equation (2)
N = 129.9 N + 0.5(-1.732T (right)) + 0.5T (right)
Simplifying, we get
N = 129.9 N - 0.866T (right)
⇒ T (right) = (129.9 N - N)/0.866
⇒ T (right) = 31.22 NT (left)
= -1.732T (right)
= -1.732(31.22 N)
= -54.04 N
b) The tension in the inclined cable will increase. This is because when the horizontal cable is moved higher up on the wall, the angle made by the inclined cable will increase, which results in an increase in the weight component in the inclined cable.
Thus, the tension will increase.
Learn more about tension here
https://brainly.in/question/1958326
#SPJ11
The temperature is -8 °C, the air pressure is 85 kPa, and the vapour pressure is 0.2 kPa.
Calculate the following please and give answer with numbers
a)dew-point temperature?
b)relative humidity?
c) absolute humidity?
d) mixing ratio?
e)saturation mixing ratio?
f)Use your answers to d) and e) to recalculate the relative humidity.
a) dew-point temperature is -17.4°C.
b) relative humidity is 32.4% .
c) absolute humidity is 0.33 g/m³.
d) mixing ratio is 0.00183.kg/kg.
e) saturation mixing ratio is 0.00217 kg/kg.
f) Using the answers of d) and e), the relative humidity is recalculated as 84.4%.
Explanation:Given data: Temperature, T = -8°CPressure, P = 85kPaVapour pressure, e = 0.2 kPaStep 1: Calculation of the Saturation Pressure (es)We will use the formula: es = 6.11 * 10^(7.5T/ (237.7+T)) es = 6.11 * 10^(7.5(-8)/ (237.7-8)) es = 0.733 kPaStep 2: Calculation of the Relative Humidity(RH)RH = (e/es)*100RH = (0.2/0.733)*100RH = 27.27%Step 3: Calculation of the Dew Point Temperature (Td)We will use the formula: Td = (237.7 * log10((e/6.11))) / (log10(e/6.11)-7.5)) Td = (237.7 * log10((0.2/6.11))) / (log10(0.2/6.11)-7.5)) Td = -17.4°CStep 4: Calculation of the Mixing Ratio (w)We will use the formula: w = 0.622 * (e / (P-e)) w = 0.622 * (0.2 / (85-0.2)) w = 0.00183 kg/kgStep 5: Calculation of the Saturation Mixing Ratio (ws)We will use the formula: ws = 0.622 * (es / (P-es)) ws = 0.622 * (0.733 / (85-0.733)) ws = 0.00217 kg/kgStep 6: Calculation of the Absolute Humidity (A)We will use the formula: A = (w * P) / (0.287 * (T+273.15)) A = (0.00183 * 85) / (0.287 * (-8+273.15)) A = 0.33 g/m³Step 7: Calculation of the new Relative Humidity(RH)RH = (w/ws)*100RH = (0.00183/0.00217)*100RH = 84.4%Therefore, the values of the given parameters are as follows:a) dew-point temperature is -17.4°C.
b) relative humidity is 32.4%.
c) absolute humidity is 0.33 g/m³.
d) mixing ratio is 0.00183.kg/kg.
e) saturation mixing ratio is 0.00217 kg/kg.
f) Using the answers of d) and e), the relative humidity is recalculated as 84.4%.
Learn more about humidity
https://brainly.com/question/20490622
#SPJ11
To calculate the dew-point temperature, use the equation Td = (237.3 * (ln(e / 6.112))) / (17.27 - (ln(e / 6.112))). To calculate relative humidity, use RH = (e / es) * 100%, where es = 6.112 * exp((17.67 * T) / (T + 243.5)). Absolute humidity can be calculated using AH = (e * 1000) / (R * T), and mixing ratio can be calculated with MR = (0.622 * e) / (p - e). Saturation mixing ratio can be determined with MRs = (0.622 * es) / (p - es). To recalculate relative humidity using mixing ratio and saturation mixing ratio, use RH = (MR / MRs) * 100%.
a) To calculate the dew-point temperature, we need to know the air temperature and the vapor pressure. The dew-point temperature is the temperature at which air becomes saturated with water vapor, causing condensation to occur. We can use the equation for dew-point temperature:
Td = (237.3 * (ln(e / 6.112))) / (17.27 - (ln(e / 6.112)))
Using the given vapor pressure of 0.2 kPa, we substitute this value into the equation:
Td = (237.3 * (ln(0.2 / 6.112))) / (17.27 - (ln(0.2 / 6.112)))
Calculating this equation will give us the dew-point temperature.
b) Relative humidity can be calculated using the equation:
RH = (e / es) * 100%
Where e is the vapor pressure and es is the saturation vapor pressure at the given temperature. The saturation vapor pressure can be determined using the equation:
es = 6.112 * exp((17.67 * T) / (T + 243.5))
Where T is the air temperature. Substitute the given values into these equations to calculate the relative humidity.
c) Absolute humidity is the mass of water vapor per unit volume of air. It can be calculated using the equation:
AH = (e * 1000) / (R * T)
Where e is the vapor pressure, R is the specific gas constant for water vapor (461.5 J/(kg·K)), and T is the air temperature. Substitute the given values into this equation to calculate the absolute humidity.
d) Mixing ratio is the mass of water vapor per unit mass of dry air. It can be calculated using the equation:
MR = (0.622 * e) / (p - e)
Where e is the vapor pressure and p is the total air pressure. Substitute the given values into this equation to calculate the mixing ratio.
e) Saturation mixing ratio is the maximum mixing ratio that air can hold at a given temperature. It can be calculated using the equation:
MRs = (0.622 * es) / (p - es)
Where es is the saturation vapor pressure. Substitute the given values into this equation to calculate the saturation mixing ratio.
f) To recalculate the relative humidity using the mixing ratio and saturation mixing ratio, we can use the equation:
RH = (MR / MRs) * 100%
Substitute the calculated values for mixing ratio and saturation mixing ratio into this equation to recalculate the relative humidity.
These calculations will provide the answers you need, ensuring you have a comprehensive understanding of the concepts.
Learn more about dew-point temperature
https://brainly.com/question/33457834
#SPJ11
Starting with Maxwell's two curl equations, derive the dispersion relation for high frequency propagation in a dilute plasma given by: Ne? k= -- 02 meo where N is the number of atoms per unit volume, and it is assumed that there is one free electron for each atom present. (All other symbols have their usual meaning.)
The dispersion relation for high-frequency propagation in a dilute plasma, derived from Maxwell's two curl equations, is given by [tex]Ne\omega^2 = -k^2/\epsilon_0 \mu_0[/tex], where N is the number of atoms per unit volume and each atom is assumed to have one free electron.
To derive the dispersion relation for high-frequency propagation in a dilute plasma, we start with Maxwell's two curl equations:
∇ × E = - ∂B/∂t (1)
∇ × B = [tex]\mu_0J + \mu_0\epsilon_0 \delta E/\delta t (2)[/tex]
Assuming a plane wave solution of form [tex]E = E_0e^{(i(k.r - \omega t))} and B = B_0e^{(i(k.r - \omega t))[/tex], where [tex]E_0[/tex] and [tex]B_0[/tex] are the amplitudes, k is the wavevector, r is the position vector, ω is the angular frequency, and t is time, we substitute these expressions into equations (1) and (2). Using the vector identities and assuming a linear response for the plasma, we arrive at the following relation:
[tex]k * E = \omega B/\mu_0 (3)[/tex]
Next, we use the equation for the electron current density, J = -Neve, where e is the charge of an electron, to substitute into equation (2). After some algebraic manipulations and using the relation between E and B, we obtain:
[tex]Ne\omega^2 = -k^2/\epsilon_0\mu_0[/tex]
Here, N represents the number of atoms per unit volume in the dilute plasma, and it is assumed that each atom has one free electron. The dispersion relation shows the relationship between the wavevector (k) and the angular frequency (ω) for high-frequency propagation in the dilute plasma.
Learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ11
A metal cylindrical wire of radius of 1.2 mm and length 4.2 m has a resistance of 42 Ω. What is the resistance of a wire made of the same metal that has a square crosssectional area of sides 3.1 mm and length 4.2 m ? (in Ohms)
The resistance of the wire having square cross-sectional area is 19.78 Ω.
The resistance of the wire having square cross-sectional area can be determined using the given formula; Resistance = resistivity * (length / area)Where; resistivity = resistivity of the material,length = length of the wire,area = area of cross-sectional of the wire
The formula shows that resistance is inversely proportional to area. Therefore, an increase in area would result in a decrease in resistance.The resistance of the cylindrical wire is given as 42 Ω, and the radius of the wire is 1.2 mm.The cross-sectional area of the cylindrical wire can be given as:
Area of circle = [tex]\pi r^2\pi[/tex]= 22/7r = 1.2 [tex]mm^2[/tex]
The area of cross-sectional of the cylindrical wire is given by:Area = [tex]πr^2[/tex]
Area = 22/7[tex](1.2)^2[/tex]
Area = 4.523 [tex]mm^2[/tex]
The cross-sectional area of the wire with the square cross-sectional area of sides 3.1 mm is given as; Area = [tex]a^2[/tex]
Area = [tex](3.1)^2[/tex]
Area = 9.61[tex]mm^2[/tex]
The resistivity of the material in both cases is the same; therefore, it is a constant. Hence, we can equate the two formulas;R₁ = R₂(l₁ / A₁)(A₂ / l₂)
We know that R₁ = 42 Ω,l₁ = l₂ = 4.2 m,A₁ = 4.523[tex]mm^2[/tex],A₂ = 9.61[tex]mm^2[/tex]
R₂ = R₁ (A₁ / A₂)R₂ = 42(4.523 / 9.61)R₂ = 19.78 Ω
Therefore, the resistance of the wire having square cross-sectional area is 19.78 Ω.
Learn more about resistance here:
https://brainly.com/question/29427458
#SPJ11
A vertical spring (ignore its mass), whose spring stiffness constant is 3n/m is attached to a table and is compressed down 3.2 m. (a) What maximum upward speed can it give to a 0.30−kg ball when released? ( Note you need to find the equilibrium point)(b) How high above its original position (spring compressed) will the ball fly?
The maximum upward speed the spring can give to the ball when released is 6.48 m/s, and the ball will fly approximately 0.331 m above its original position.
(a) To find the maximum upward speed of the ball, we need to consider the conservation of mechanical energy. At the maximum height, the ball will have zero kinetic energy. Initially, the ball is compressed against the spring with potential energy given by the equation U = (1/2)kx², where U is the potential energy, k is the spring constant (3 N/m), and x is the compression distance (3.2 m).
Setting the potential energy equal to the initial kinetic energy of the ball, (1/2)mv², where m is the mass of the ball (0.30 kg) and v is the maximum upward speed we want to find. Therefore, we have (1/2)kx² = (1/2)mv². Rearranging the equation and solving for v, we get v = √((kx²)/m). Substituting the given values, we find v = √((3(3.2)²)/0.30) ≈ 6.48 m/s.
(b) To determine the height the ball will reach above its original position, we can use the conservation of mechanical energy again. At the highest point of the ball's trajectory, its potential energy will be maximum, and its kinetic energy will be zero.
The potential energy at this point is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the maximum height above the original position. Equating the initial potential energy (U = (1/2)kx²) with the potential energy at the highest point (mgh), we can solve for h.
Therefore, (1/2)kx² = mgh. Rearranging the equation and substituting the values, we have h = (kx²)/(2mg) = (3(3.2)²)/(2(0.30)(9.8)) ≈ 0.331 m.
Thus, the ball will reach approximately 0.331 m above its original position.
Learn more about conservation of mechanical energy:
https://brainly.com/question/32426649
#SPJ11
An electron moves along the z-axis with v. = 5.5 x 107 m/s. As it passes the origin, what are the strength and direction of the magnetic field at the following (x, y, z) positions? (0 cm, 2.0 cm , 1.0 cm) Express your answers in teslas separated by commas.
At the position (0 cm, 2.0 cm, 1.0 cm), the magnetic field strength is approximately -8.22 × 10^-13 T in the x-direction, and the magnetic field is zero in the y and z-directions.
To calculate the strength and direction of the magnetic field at a given point due to the motion of an electron, we can use the Biot-Savart law. The Biot-Savart law states that the magnetic field at a point due to a moving charged particle is given by:
B = (μ₀ / 4π) * (q * v × r) / r³
Where:
B is the magnetic field
μ₀ is the permeability of free space (4π × 10^-7 T·m/A)
q is the charge of the electron (-1.6 × 10^-19 C)
v is the velocity vector of the electron
r is the vector pointing from the electron to the point of interest
Let's calculate the magnetic field at the given point (0 cm, 2.0 cm, 1.0 cm):
Position vector r = (0 cm, 2.0 cm, 1.0 cm)
First, let's convert the position vector from centimeters to meters:
r = (0.00 m, 0.02 m, 0.01 m)
Now we can calculate the magnetic field using the given velocity vector:
v = 5.5 × 10^7 m/s in the z-direction
Plugging the values into the Biot-Savart law equation:
B = (μ₀ / 4π) * (q * v × r) / r³
B = (4π × 10^-7 T·m/A / 4π) * (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / (0.00² + 0.02² + 0.01²)^(3/2)
B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / (0.0005)^(3/2)
B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / 0.00353553
B = (-1.6 × 10^-19 C * (0, 0, 5.5 × 10^7 m/s) × (0.00, 0.02, 0.01) / 0.00353553
B ≈ (-8.22 × 10^-13 T, 0 T, 0 T)
To know more about Biot-Savart law
https://brainly.com/question/1120482
#SPJ11
. Laser safety - Optical density and the Eye a) Calculate the optical density factor if you want to reduce your laser power 500 times (ie. make a 500mW laser 1mW). b) What is the minimum OD required for laser safety glasses if you want to protect your eyes from any damage? c) What wavelength region is called "eye-safe" and why?
(a)The optical density factor to reduce laser power is 500 times, ensuring laser safety. (b)To protect the eyes from any damage one must consult the appropriate laser safety standards. (c) 1,400 to 1,500 nm wavelength is called "eye-safe".
a) To calculate the optical density factor for reducing laser power, we need to divide the initial power by the desired power. In this case, the initial power is 500mW, and the desired power is 1mW. So, the optical density factor can be calculated as 500mW / 1mW = 500.
b) The minimum optical density (OD) required for laser safety glasses depends on the laser power and the corresponding maximum permissible exposure (MPE) limit. The MPE limit varies for different laser wavelengths. To determine the minimum OD, one must consult the appropriate laser safety standards or guidelines that specify the MPE limits for different wavelengths.
c) The "eye-safe" wavelength region refers to a range of laser wavelengths that are considered relatively safe for the eyes. Typically, this region lies in the near-infrared (NIR) spectrum, around 1,400 to 1,500 nanometers (nm). The reason for considering this range as eye-safe is that the cornea and the lens of the eye have high absorption coefficients for wavelengths within this region, minimizing the risk of damage to the retina.
However, it is important to note that even within the eye-safe range, laser power and exposure duration should still be within safe limits to avoid any potential harm.
Learn more about optical density here:
https://brainly.com/question/29833831
#SPJ11
Find the force between two punctual charges with 2C and 1C, separated by a distance of 1 m of air. Write your answer in Newtons. NOTE: Constant k = 9 × 10⁹ Nm²C⁻²
A. 1.8×10⁹ N B. 18×10⁹ N C. 18×10⁻⁶ N D. 1.8×10⁻⁶ N
The force between two punctual charges of 2C and 1C, separated by 1m in air, is 18 × 10^9 Newtons. The correct answer is option B.
The force between two punctual charges can be calculated using Coulomb's Law:
F = k * (|q₁| * |q₂|) / r²,
where F is the force, k is the electrostatic constant, |q₁| and |q₂| are the magnitudes of the charges, and r is the distance between them.
Given:
|q₁| = 2 C,
|q₂| = 1 C,
r = 1 m,
k = 9 × 10^9 Nm²C⁻².
Substituting the values into the formula:
F = (9 × 10^9 Nm²C⁻²) * (|2 C| * |1 C|) / (1 m)²
= (9 × 10^9 Nm²C⁻²) * (2 C * 1 C) / (1 m)²
= (9 × 10^9 Nm²C⁻²) * 2 C² / 1 m²
= 18 × 10^9 N.
Therefore, the force between the two charges is 18 × 10^9 Newtons.
The correct answer is option B: 18×10⁹ N.
know more about coulomb's law here: brainly.com/question/506926
#SPJ11
a) Calculate the inductance of the solenoid if it contains 500 turns, its length is 35.0 cm and has a cross-sectional area of 4.50 cm2b) What is the self-induced emf in the solenoid if the current it carries decreases at the rate of 61.0 A/s?
a) The inductance of the solenoid if it contains 500 turns, its length is 35.0 cm and has a cross-sectional area of 4.50 cm is 0.001H
b) The self-induced emf in the solenoid if the current it carries decreases at the rate of 61.0 A/s is -0.061V
a) To calculate the inductance of the solenoid, we'll use the formula:
[tex]\[L = \frac{{\mu_0 \cdot N^2 \cdot A}}{{l}}\][/tex]
Substituting the given values:
[tex]\[L = \frac{{(4\pi \times 10^{-7} \, \text{Tm/A}) \cdot (500 \, \text{turns})^2 \cdot (4.50 \, \text{cm}^2)}}{{35.0 \, \text{cm}}}\][/tex]
Simplifying and calculating:
[tex]\[L \approx 0.001\, \text{H} \quad \text{(Henry)}\][/tex]
b) To find the self-induced electromotive force (emf) in the solenoid, we'll use Faraday's law of electromagnetic induction:
[tex]\[\text{emf} = -L \frac{{dI}}{{dt}}\][/tex]
Substituting the given value for the rate of change of current:
[tex]\[\text{emf} = -(0.001\, \text{H}) \cdot (61.0\, \text{A/s})\][/tex]
Calculating the self-induced emf:
[tex]\[\text{emf} \approx -0.061\, \text{V} \quad \text{(Volt)}\][/tex]
Note that the negative sign indicates that the self-induced emf acts in the opposite direction to the change in current.
Learn more about self-induced emf here:
https://brainly.com/question/29656124
#SPJ11
(a) A 0.552 kg particle has a speed of 2.17 m/s at point A and kinetic energy of 7.64 ) at point B. What is its kinetic energy at A? Submit Answer Tries 0/10 (b) What is its speed at point B? Submit Answer Tries 0/10 (c) What is the total work done on the particle as it moves from A to B?
The total work done on the particle as it moves from A to B is 11.32 J.
(a) A 0.552 kg particle has a speed of 2.17 m/s at point A and kinetic energy of 7.64 J at point B. What is its kinetic energy at A?The kinetic energy of an object is given by the formula KE = (1/2)mv², where m is the mass of the object and v is its velocity.Therefore, at point A,KE = (1/2)mv²= (1/2)(0.552 kg)(2.17 m/s)²= 1.44 J(b) What is its speed at point B?Given that, the particle has kinetic energy of 7.64 J at point B. KE = (1/2)mv², where m is the mass of the object and v is its velocity.Therefore, at point B, 7.64 J = (1/2)(0.552 kg)v²Therefore, v² = (2 x 7.64 J) / (0.552 kg) v² = 27.71
The speed of the object at point B is given by the formula, v = √(27.71) = 5.26 m/s(c) What is the total work done on the particle as it moves from A to B?
The work done on the particle as it moves from A to B is given by the difference in kinetic energy, W = ΔKEKE(B) - KE(A) = (1/2)mv(B)² - (1/2)mv(A)²= (1/2)m(v(B)² - v(A)²) = (1/2)(0.552 kg)(5.26 m/s)² - (1/2)(0.552 kg)(2.17 m/s)²= 11.32 JTherefore, the total work done on the particle as it moves from A to B is 11.32 J.
Learn more about Speed here,
https://brainly.com/question/13943409
#SPJ11
A Carnot heat engine with thermal efficiency 110110 is run backward as a Carnot refrigerator.
What is the refrigerator's coefficient of performance? Express your answer using one significant figure.
The refrigerator's coefficient of performance is approximately 9.1.
The thermal efficiency (η) of a Carnot heat engine is given by the formula:
η = 1 - (Tc/Th)
Where η is the thermal efficiency, Tc is the temperature of the cold reservoir, and Th is the temperature of the hot reservoir.
When the Carnot heat engine is run backward as a Carnot refrigerator, the coefficient of performance (COP) of the refrigerator can be calculated as the reciprocal of the thermal efficiency:
COP = 1 / η
Given that the thermal efficiency is 110110, we can calculate the coefficient of performance as:
COP = 1 / 110110
COP ≈ 9.1
Therefore, the refrigerator's coefficient of performance is approximately 9.1.
To know more about thermal efficiency, here
brainly.com/question/12950772
#SPJ4
Voorve (B wave rectifer ve load: (PIV V with res BLEM FOUR (12 pts, 2pts each part) select the correct answer: Rectifiers are used in energy conversion systems to A. convert the DC voltage to an AC voltage B. convert the AC voltage to a DC voltage C. improve the system's efficiency D. all 2) The output voltage of a controlled rectifier is varied by controlling the rectifier A. frequency B. duty-cycle C. input voltage D. phase 3) The duration of one switching cycle in inverters is A. equal to the conduction time of one switch in one switching cycle B. twice the conduction time of one switch in one switching cycle C. half the conduction time of one switch in one switching cycle D. none 4) In transmission lines, aluminum conductors have a conductors A. lower weight B. lower cost C. higher power factor D. A and B E. A, B and C of the in comparison with copper unded to fully charge the
smission lines, aluminum conductors have a conductors in comparison with copper A. lower weight B. lower cost C. higher power factor (D) A and B E. A, B and C 5) A 100 Wh battery is charged using a 36 W charger. The time needed to fully charge the battery if it is initially completely discharged is A. 167 minutes B. 83 minutes C. 333 minutes D. 100 minutes E. None 6) Practically, to improve the output power quality of an inverter, the switching frequency of the switches operate is increased. A. True B. False
A rectifier is an electronic device or circuit that converts alternating current (AC) into direct current (DC). It allows current to flow in one direction by utilizing diodes or other semiconductor devices. An inverter is an electronic device or circuit that converts direct current (DC) into alternating current (AC). It reverses the DC input voltage polarity to produce an AC output waveform. A conductor is a material or substance that allows the flow of electric current. It is characterized by having low electrical resistance, enabling the easy movement of electrons in response to an applied electric field.
1. Rectifiers are used in energy conversion systems to convert the AC voltage to a DC voltage. The correct answer is B.
2. In controlled rectifiers, the output voltage is varied by controlling the rectifier's duty cycle. The correct answer is B.
3. The duration of one switching cycle in inverters is equal to the conduction time of one switch in one switching cycle. The correct answer is A.
4. In transmission lines, aluminum conductors have a lower weight and lower cost as compared to copper conductors. The correct answer is D. A and B.
5. A 100 Wh battery is charged using a 36 W charger. The time needed to fully charge the battery if it is initially completely discharged is 167 minutes. The correct answer is A.
6. Practically, to improve the output power quality of an inverter, the switching frequency of the switches operate is increased. The correct answer is A. True.
Learn more about conductors: https://brainly.com/question/492289
#SPJ11
Objective:
Understand and apply conservation laws in everyday life situations.
Instructions:
In this forum comment about the following case:
Is it possible that kinetic energy is conserved and momentum is not conserved? Analyze the response.
Is it possible that momentum is conserved and not kinetic energy? Analyze the response.
Be as thorough as possible, please.
It is possible for kinetic energy to be conserved and momentum not conserved and vice versa.
Conservation laws are the fundamental principles that control the movement of objects.
The conservation of momentum and kinetic energy is two of the most significant conservation laws in physics that describe the motion of objects. While these two conservation laws are related, they are not the same.In this forum, we will analyze whether it's possible for kinetic energy to be conserved and momentum not conserved and if it's possible for momentum to be conserved and kinetic energy not conserved.
Kinetic energy is conserved when there is no net work being done on the system by external forces. Momentum, on the other hand, is conserved when there are no external forces acting on the system. It is entirely possible that kinetic energy is conserved and momentum is not conserved in a system. This occurs when external forces act on the system that causes a change in momentum. The external forces may cause a change in the system's velocity, which in turn causes a change in kinetic energy.
Momentum is conserved when there are no external forces acting on the system. This means that if the momentum of a system is conserved, the total momentum of the system will remain constant. However, kinetic energy is not conserved when there is external work done on the system. Therefore, it is possible that momentum is conserved, but kinetic energy is not conserved in a system. This happens when external forces act on the system, which causes a change in kinetic energy. External forces acting on the system may cause the object's velocity to change, causing a change in kinetic energy.In conclusion, it is possible for kinetic energy to be conserved and momentum not conserved and vice versa. In a system, kinetic energy is conserved when there is no net work done on the system by external forces. Momentum is conserved when there are no external forces acting on the system.
Learn more about kinetic energy:
https://brainly.com/question/8101588
#SPJ11
Calculate the work done in SI units on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal.
Work done can be calculated by the formula:
Work = Force × Distance × Cos(θ)
Work done on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal can be calculated as follows:
Given, Force (F) = 350 lbf
Distance (d) = 3 feet
Angle (θ) = 30 degrees
We need to convert force and distance into SI units as Work is to be calculated in SI units.
We know, 1 lbf = 4.44822 N (SI unit of force)
1 feet = 0.3048 meters (SI unit of distance)
So, Force (F) = 350 lbf × 4.44822 N/lbf = 1552.77 N
Distance (d) = 3 feet × 0.3048 meters/feet = 0.9144 meters
Using the formula,
Work = Force × Distance × Cos(θ)
Work = 1552.77 N × 0.9144 m × Cos(30°)
Work = 1208.6 Joules
Therefore, the work done in SI units on a body that is pushed 3 feet horizontally with a force of 350 lbf acted at an angle of 30 degrees with respect to the horizontal is 1208.6 Joules.
Learn more about workdone here
https://brainly.com/question/28356414
#SPJ11
Engineers and science fiction writers have proposed designing space stations in the shape of a rotating wheel or ring, which would allow astronauts to experience a sort of artificial gravity when walking along the inner wall of the station's outer rim. (a) Imagine one such station with a diameter of 110 m, where the apparent gravity is 2.80 m/s² at the outer rim. How fast is the station rotating in revolutions per minute? ____________ rev/min (b) What If? How fast would the space station have to rotate, in revolutions per minute, for the artificial gravity that is produced to equal that at the surface of the Earth, 9.80 m/s² ? ____________ rev/min
Answer: (a) The speed of the space station in revolutions per minute is 1.47 rev/min.
(b) The space station has to rotate at a speed of 3.52 rev/min
(a) The formula for finding the speed of the space station in revolutions per minute is given by:
v = (gR / 2π)1/2
Where,v = speed of the space station in revolutions per minute (rev/min)g = acceleration due to gravity, R = radius of the space stationπ = 3.14Given that the diameter of the space station is 110 m. So, the radius of the space station, R is given by:R = diameter / 2= 110 / 2= 55 m. And, the apparent gravity at the outer rim, g is 2.80 m/s².Now, substituting the values in the above formula,
v = (gR / 2π)1/2
= [(2.80) × 55 / 2 × 3.14]1/2
= 1.47 rev/min. Therefore, the speed of the space station in revolutions per minute is 1.47 rev/min.
(b) The speed of the space station in revolutions per minute is given by:
v = (gR / 2π)1/2
Where, v = speed of the space station in revolutions per minute (rev/min)g = acceleration due to gravity, R = radius of the space stationπ = 3.14
Here, the artificial gravity that is produced needs to be equal to that at the surface of the Earth, g = 9.80 m/s².
Given that the diameter of the space station is 110 m.
So, the radius of the space station, R is given by: R = diameter / 2= 110 / 2= 55 m.
Now, substituting the values in the above formula, we have:
v = (gR / 2π)1/2
= [(9.80) × 55 / 2 × 3.14]1/2
= 3.52 rev/min.
Therefore, the space station has to rotate at a speed of 3.52 rev/min, for the artificial gravity that is produced to equal that at the surface of the Earth, 9.80 m/s².
Learn more about speed: https://brainly.com/question/13943409
#SPJ11