Answer:
Gas
Explanation:
Do not put any sub- stance into the flame unless specifically instructed to do so. Never reach over an exposed flame. Light gas (or alcohol) burners only as instructed by the teacher.
Where do you find elements that have energy levels that are all full of electrons? (1 point)
across the bottom of the periodic table
on the right side of the periodic table
on the left side of the periodic table
across the top of the periodic table
Answer:
पेरिोदिछ ताबले माछकिनौय
Answer:
on the right side of the periodic table
Pls help 10 points
Plsplsplspslspslspslsspsls
Determine the empirical formula of the compound formed when 1.2g of magnesium reacts with 3.55g of chlorine.Take the molar mass of magnesium and chlorine to be 24g and 35.5g respectively.
Explanation:
For Mg, (1.2 g Mg/24 g Mg) = 0.05 mol Mg.
For Cl, (3.55 g Cl/35.5 g Cl) = 0.1 mol Cl
So the ratio now is
Mg:Cl = 0.05 : 0.1 = 1:2
I got the 1:2 ratio by dividing both by the smallest number, which is 0.05 mol. Therefore, the empirical for formula of the substance is [tex]MgCl_2[/tex]
The empirical formula of the compound formed when magnesium reacts with chlorine is MgCl₂.
To determine the empirical formula of the compound formed when magnesium (Mg) reacts with chlorine (Cl), we need to find the ratio of the elements in terms of moles.
First, we calculate the number of moles of each element:
Moles of Mg = Mass of Mg / Molar mass of Mg
Moles of Mg = 1.2 g / 24 g/mol
Moles of Mg = 0.05 mol
Moles of Cl = Mass of Cl / Molar mass of Cl
Moles of Cl = 3.55 g / 35.5 g/mol
Moles of Cl = 0.1 mol
Next, we determine the simplest whole-number ratio between the moles of Mg and Cl:
Mg:Cl = 0.05 mol : 0.1 mol
To simplify the ratio, we divide both values by the smaller value (0.05 mol in this case):
Mg:Cl = 0.05 mol / 0.05 mol : 0.1 mol / 0.05 mol
Mg:Cl = 1 : 2
Therefore, the empirical formula of the compound formed when magnesium reacts with chlorine is MgCl₂.
Learn more about empirical formula from the link given below.
https://brainly.com/question/32125056
#SPJ2
The study of Environmental Science includes which of the following?
A.)human biology
B.)the relationship between the Earth and the moon
C.)interactions between humans and living and non-living things in the environment
D.)the study of organisms living in the ocean
Answer:
Hi, There! the Correct Answer is below!
C.)interactions between humans and living and non-living things in the environment
Explanation:
Environmental scientists study subjects like the understanding of earth processes, evaluating alternative energy systems, pollution control and mitigation, natural resource management, and the effects of global climate change. ... Environmental scientists bring a systems approach to the analysis of environmental problems.
____________________________________________________________
Have a wonderful Day :)
~Darkspirit~
Answer:
interactions between human and living and non living things in the environment
NaClO4/ HCIO4 is a buffer system
solve it and get 50 points
Answer:
Not sure but I think it is C!
Explanation:
The starting material is a benzene ring with a hydroxy group on carbon 1 and an N H 2 on carbon 4. This reacts with one equivalent of acetic anhydride, which is an oxygen flanked by two carbonyls, each bonded to a methyl group.
The final product of the reaction is 4-amino-3-hydroxy-1-acetylbenzene, also known as N-acetylanthranilic acid.
What is catalyst?A catalyst is a substance that accelerates or reduces the temperature or pressure required to initiate a chemical reaction without being consumed in the process.
The Friedel-Crafts acylation reaction occurs when benzene reacts with acetic anhydride in the presence of an acid catalyst.
The acid catalyst activates the acetic anhydride to form an acylium ion intermediate in this reaction. This intermediate reacts with the benzene ring, giving it an acetyl group.
On carbon 1, there is a hydroxy group, and on carbon 4, there is an NH2 group.
Both of these functional groups are activating groups, which means they donate electrons to the benzene ring and increase its reactivity to electrophilic aromatic substitution reactions like Friedel-Crafts acylation.
Acetic anhydride adds an acetyl group to the benzene ring in a regioselective manner, which means it only adds to one position on the ring.
Thus, in this case, it adds to carbon 1, which is more reactive than carbon 4 due to the presence of the hydroxy group.
For more details regarding catalyst, visit:
https://brainly.com/question/24430084
#SPJ2
Which of the following is more soluble in water, methanol (CH3OH), or CH2I2(l).
Answer:
CH3OH
Explanation:
has hydroxide ions
Solubility has been the property of the substance to get dissolved to form the solution. Methanol (CH₃OH) is more soluble in water than Diiodomethane (CH₂I₂).
What is solubility?Solubility is best defined as the capability of the substance to get dissolved or dissociated into a solvent for the formation of the solution at a given temperature. The solubility of the various substances varies and is an important part of the mixture and solution.
Solubility in water has been the measure of the solute to get dissolved in water. The pressure and the temperature of the system directly affect the solubility of any substance in a solvent. Water is a polar molecule with hydrogen bonds in a great solvent that dissolves almost all the molecules like salt, sugar, etc.
Methanol is soluble in water as it contains hydrogen bonds as the intermolecular forces that interact with the polar water molecule by the virtue of the hydroxide and the hydrogen ions that show the molecular attraction and allows the molecule to get dissolved.
Therefore, methanol is soluble in water.
Learn more about solubility, here:
https://brainly.com/question/14278895
#SPJ2
Please show the working for question 1 to 8
Answer:
5) C
6) D
7) D
8) C
Explanation:
27. What is the mass of 2.34 x 1023 atoms of Sulfur?
a) 12.5 g
b) 1.25 x 1049
g
c) 1.25 x 1047 g
Answer:
[tex]\boxed {\boxed {\sf A. \ 12.5 \ grams}}[/tex]
Explanation:
We are asked to find the mass of 2.34 × 10²³ atoms of sulfur (S)
1. Convert Atoms to MolesFirst, we convert atoms to moles using Avogadro's Number of 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. For this question, the particles are atoms of sulfur. There are 6.022 × 10²³ atoms of sulfur in 1 mole of sulfur.
We will convert using dimensional analysis, so we must set up a ratio.
[tex]\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
We are converting 2.34 × 10²³ atoms of sulfur to moles, so we multiply the ratio by this value.
[tex]2.34 \times 10^{23} \ atoms \ S* \frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
Flip the ratio so the units of atoms of sulfur cancel.
[tex]2.34 \times 10^{23} \ atoms \ S* \frac{1 \ mol \ S} {6.022 \times 10^{23} \ atoms \ S}[/tex]
[tex]2.34 \times 10^{23}* \frac{1 \ mol \ S} {6.022 \times 10^{23}}[/tex]
[tex]\frac{2.34 \times 10^{23}} {6.022 \times 10^{23}} \ mol \ S[/tex]
[tex]0.3885752242 \ mol \ S[/tex]
2. Convert Moles to GramsNext, we convert moles to grams using the molar mass. This is the mass of 1 mole of a substance. The value is found on the Periodic Table as the atomic mass, but the units are grams per mole instead of atomic mass units. Look up sulfur's molar mass.
S: 32.07 g/molSet up another ratio.
[tex]\frac {32.07 \ g \ S}{ 1\ mol \ S}[/tex]
Multiply by the number of moles we calculated.
[tex]0.3885752242 \ mol \ S *\frac {32.07 \ g \ S}{ 1\ mol \ S}[/tex]
The units of moles of sulfur cancel.
[tex]0.3885752242 *\frac {32.07 \ g \ S}{ 1}[/tex]
[tex]0.3885752242 * {32.07 \ g \ S}[/tex]
[tex]12.46160744 \ g \ S[/tex]
3. RoundThe original value of atoms (2.34 × 10²³) has 3 significant figures (2,3, 4), so our answer must have the same. For the number we calculated, that is the tenths place. The 6 in the hundredth place tells us to round the 4 up to a 5.
[tex]12.5 \ g \ S[/tex]
There are 12.5 grams of sulfur in 2.34 × 10²³ atoms of sulfur.
How do we measure the weight or mass of something
Explanation:
We can measure the weight or mass of something by using beam balance.
* The 'emf generated by
a copper-constantan thermometer is 15 mv. If the cold junction is at a temperature of 20 degrees celcius.Calculate the temperature of the hot junction when sensitivity
of the thermocouple is 0.03mv/degree celcius
Thermometers are used to measure temperatures. The temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Given that:
[tex]EMF = 15mv[/tex]
[tex]T_1 =20^oC[/tex] --- Temperature at cold junction
[tex]s = 0.03mv/^oC[/tex] ---- Sensitivity
The temperature [tex]T_2[/tex] at the hot junction is calculated as follows:
[tex]T_2 = \frac{EMF}{s} + T_1[/tex]
So, we have:
[tex]T_2 = \frac{15mv}{0.03mv/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03/^oC} + 20^oC[/tex]
[tex]T_2 = \frac{15}{0.03}^oC + 20^oC[/tex]
[tex]T_2 = 500^oC + 20^oC[/tex]
[tex]T_2 = 520^oC[/tex]
Hence, the temperature of the hot junction of the thermocouple is [tex]520^oC[/tex]
Read more about thermometers at:
https://brainly.com/question/13271366
Unit of electro negativity
Answer:
There are no units with electro negativity. Linus Pauling designed a scale of electro negativity that ranks elements with respect to each other. So, for example, fluorine is a 4.0 in comparison to 0.7 for francium.
Explanation:
Dieldrin is a pesticide that is effective in killing?
Answer:
fddoiiijjjjjjjhhggggrrddffgghuuiii
2. Based on the following balanced equation:
2 NH3 + 202 N2O + 3 H2O
a. How many moles of O2 are required to react completely with 3.00 moles of NH3?
1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00
b. How many moles of H20 are produced after complete reaction of 3.00 moles of NH3?
1.00
1.50 2.00 2.50 3.00
3.50 4.00 4.50 5.00
c. How many moles of N O are produced after complete reaction of 3.00 moles of NH3?
1.00 1.50 2.00 2.50 3.00
3.50
4.00 4.50 500
To do this, just take the given miles and multiply it with the ratio of molecules in the chemical equation to get your answer.
limewater turns cloudy or milk when a gas bubbled through it. what is the cause of its cloudiness?
hi <3
the cloudiness is caused by the production of carbon dioxide
hope this helps :)
Answer:
Lime water is calcium hydroxide with formula
[tex]{ \sf{Ca(OH)_2}}[/tex]
when calcium hydroxide reacts with the gas [ carbon dioxide ]
[tex]{ \sf{Ca(OH)_{2(aq)} + CO_{2(g)} → CaCO_{3(s)} + H_2O_{(l)}}}[/tex]
Calcium carbonate is white cloudy precipitate
How many moles of aluminum oxide (Al2O3) are in a sample with a mass of 204.0 g?
Answer:
[tex]\boxed {\boxed {\sf 2.001 \ mol \ Al_2O_3}}[/tex]
Explanation:
We are asked to convert grams of aluminum oxide to moles. We will do this using the molar mass or mass of 1 mole of a substance. The values are found on the Periodic Table. They are equal to the atomic masses, but the units are grams per mole instead of atomic mass units.
We have the compound aluminum oxide or Al₂O₃. We must look up the molar masses of the individual elements: aluminum and oxygen.
Al: 26.981538 g/mol O: 15.999 g/molThe formula of the compound has subscripts (a subscript of 2 after Al and subscript of 3 after O). There are 2 moles of aluminum and 3 moles of oxygen in 1 mole of aluminum oxide. We must multiply the molar mass by its subscript.
Al₂ : 26.981538 * 2=53.963076 g/mol O₃: 15.999 * 3=47.997 g/mol Al₂O₃ =53.963076 + 47.997 = 101.960076 g/molWe convert using dimensional analysis, so we set up a ratio using the molar mass.
[tex]\frac {101.960076 \ g \ Al_2O_3}{ 1 \ mol \ Al_2O_3}[/tex]
We are converting 204.0 grams to moles, so we multiply by this value.
[tex]204.0 \ g \ Al_2O_3 *\frac {101.960076 \ g \ Al_2O_3}{ 1 \ mol \ Al_2O_3}[/tex]
Flip the ratio so the units of grams of aluminum oxide cancel.
[tex]204.0 \ g \ Al_2O_3 *\frac { 1 \ mol \ Al_2O_3}{101.960076 \ g \ Al_2O_3}[/tex]
[tex]204.0 *\frac { 1 \ mol \ Al_2O_3}{101.960076}[/tex]
[tex]\frac {204.0}{101.960076} \ mol \ Al_2O_3[/tex]
[tex]2.00078313 \ mol \ Al_2O_3[/tex]
The original measurement of grams has 4 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in ten-thousandth place tells us to round the 0 up to a 1.
[tex]2.001 \ mol \ Al_2O_3[/tex]
204.04 grams of aluminum oxide is equal to approximately 2.01 moles of aluminum oxide.
How did you figure out the number of electrons in each atom?
Answer:
The atomic number of an atom [ number of protons ] is the number of electrons of an atom.
[tex].[/tex]
The total charge on each atom is zero explain why?
Answer:
because it has the same number of protons as electrons.
please help me with this question i put 100 points on it and i will give brainlyest no links or files or i will report
The Earth’s tilt changes its position relative to the stars and constellations as the Earth rotates around its axis.
This type of evidence is testimonial evidence. Statements that are made under oath
A. Trace Evidence
B. Indirect Evidence
C. Direct Evidence
D. Physical Evidence
Answer:
B
You are only trained as a Fry man kitchen helper in your restaurant. One day, one of the trained kitchen helpers assigned to the sauté station was absent. The Executive chef immediately assigned you to the sauté station by force.
What will you do considering that you have no training in that station?
PLeaseeeeeeee help me ┗( T﹏T )┛
PLEASE ANSWER!!!!!!! 80 POINTS
Which statement describes the properties of lanthanoids and actinoids?(1 point)
A. They are malleable and lustrous, and they tend to conduct both electricity and thermal energy.
B. They are brittle and dull, and they tend to conduct both electricity and thermal energy.
C. They are brittle and dull, and they tend to be poor conductors of both electricity and thermal energy.
D. They are malleable and lustrous, and they tend to be poor conductors of both electricity and thermal energy.
Lanthanoids and actinoids are transition elements of the periodic table. These elements are lustrous and malleable and can conduct thermal energy and electricity. Thus, option A is correct.
What are lanthanoids and actinoids?Lanthanoids and actinoids are the terms used to refer to the elements of the f-block of the periodic table that are placed separately due to the difference in their electronic structures.
These elements show the property somewhat similar to that of the metals and hence are lustrous and malleable. Due to the transition electron phase, they are used in optical devices and cardiac pacemakers.
The lanthanoids and actinoids are good conductors of heat and electricity as their electrons can be transferred and carry charges like metals.
Therefore, option A. the lanthanoids and actinoids are conductors and are malleable.
Learn more about actinoids here:
https://brainly.com/question/14322602
#SPJ2
Isotopes have
Question 3 options:
A)
a different number of neutrons in their nuclei.
B)
a different number of protons in their nuclei.
C)
a different number of electrons.
D)
different numbers of both protons and neutrons in their nuclei.
Answer:
a different number of neutrons in their nuclei.
Explanation:
What is the main difference between dew and clouds?
Answer:
dew is wet and clouds are not
Explanation:
Which of the following is an example of a change from gravitational potential
energy to kinetic energy?
Answer:
The speed of a roller coaster increases as gravity pulls it downhill and is greatest at its lowest point. Viewed in terms of energy, the roller-coaster-Earth system's gravitational potential energy is converted to kinetic energy
Explanation:
a ball held in the air is the example of a change from gravitational potential energy to kinetic energy.
Convert a length of 20.0m to inches
Answer:
787.401575 inches
Write short Note On Valence shell
Answer:
The number of electrons in the outermost shell of a particular atom determines its reactivity, or tendency to form chemical bonds with other atoms. This outermost shell is known as the valence shell, and the electrons found in it are called valence electrons.
Explanation:
brainliest is appreciated
In nature, Chlorine-35 isotopes (35 amu) make up 75
% of all chlorine. Chlorine-37 (37 amu) isotopes make
up 25 % of all chlorine,
Show your calculation for the AVG. Atomic Mass of
chlorine:
How many grams of Co, are produced when 3.60 g of Fe 0 reacts with excess CO?
Fe2O3 + CO -> Fe + CO2
Answer:
2.98 g CO2
Explanation:
1. Balance the chemical equation
1 Fe2O3 + 3CO -> 2Fe + 3CO2
2. Use periodic table to find mass from each CO2 and Fe2O3
3. Calculate
3.60 g Fe2O3 x [tex]\frac{1 mol Fe2O3}{159.69 g Fe2O3}x\frac{3 mol CO2}{1 mol Fe2O3}[/tex] x[tex]\frac{44.01 g CO2}{1 mol CO2}[/tex] = 2.98 g CO2
The grams of CO, produced when 3.60 g of Fe 0 reacts with excess CO is 2.98 grams Co2.
What is mass?Mass is the quantity of matter of a physical body.
The balanced equation is
[tex]\rm Fe_2O_3 + CO - > Fe + CO_2[/tex]
The calculation is
[tex]3.60 g \;Fe_2O_3 \times \dfrac{ 1 mol\;Fe_2O_3}{159.69} \times \dfrac{3 mol CO_2}{1 mol \;Fe_2O_3 } \times \dfrac{44.01\;CO_2}{1 mol\; CO_2} = 2.98 g\;CO_2[/tex]
Thus, the grams of CO, produced when 3.60 g of Fe 0 reacts with excess CO is 2.98 grams Co2.
Learn more about mass
https://brainly.com/question/19694949
#SPJ2