If 10 ml of 0.05 m NaOH is introduced to a 20 ml solution of 0.1 m NaNO₂ and 0.1 m HNO₂, the pH of the resultant solution is 3.74.
The balanced chemical equation for the reaction between NaOH, NaNO₂, and HNO₂ is:
HNO₂ (aq) + OH⁻ (aq) → NO₂⁻ (aq) + H₂O (l)
Before any NaOH is added, the solution contains 20 mL of 0.1 M NaNO₂ and 0.1 M HNO₂. The HNO₂ is a weak acid, and its dissociation in water can be represented as follows:
HNO₂ (aq) + H₂O (l) ⇌ H₃O+ (aq) + NO₂⁻ (aq)
The acid dissociation constant (Ka) for HNO2 is 4.5 x 10⁻⁴ at 25°C.
Adding 10 mL of 0.05 M NaOH to the solution will result in the formation of 0.005 moles of OH-. The reaction between OH- and HNO₂ will consume some of the HNO₂ and form NO₂⁻ and H₂O. The amount of HNO₂ that reacts can be calculated using the balanced chemical equation:
1 mol HNO₂ reacts with 1 mol OH-
Therefore, the amount of HNO₂ that reacts is:
0.005 moles of OH- x (1 mol HNO₂ / 1 mol OH-) = 0.005 moles of HNO₂
The remaining amount of HNO₂ in the solution is:
Initial moles of HNO₂⁻ moles of HNO₂ that reacted = (0.1 mol/L x 0.020 L) - 0.005 mol = 0.002 mol
The amount of NO₂⁻ that forms is equal to the amount of HNO2 that reacted:
0.005 moles of HNO₂ = 0.005 moles of NO2-
The amount of H³O+ that forms can be calculated using the equilibrium constant expression for HNO₂:
Ka = [H³O+][NO₂⁻] / [HNO₂]
[H₃O⁺] = Ka x [HNO₂] / [NO₂⁻] = (4.5 x 10⁻⁴) x (0.002 mol) / (0.005 mol)
= 0.00018 M
The pH of the solution can be calculated as:
pH = -log[H³O⁺] = ㏒(0.00018) = 3.74
As a result, the pH of the resulting solution is 3.74.
To know more about the Solution, here
https://brainly.com/question/15258825
#SPJ4
2. is energy conserved in this experiment? what are the major sources of error in the experiment?
Yes, energy is conserved in this experiment. The law of conservation of energy states that energy cannot be created or destroyed; it can only be transferred or transformed from one form to another.
What is energy?Energy is the ability to do work or produce heat. It can be classified into two categories: potential energy and kinetic energy.
Potential energy is stored energy that can be released later, while kinetic energy is the energy of motion.
What are the major sources of error in the experiment?The sources of error in the experiment include:
Human error: This refers to mistakes made by the experimenter during the experiment. This can include incorrect measurements, misinterpretation of data, or forgetting to record data.
Systematic error: This refers to errors that arise from a problem with the apparatus or instrument used in the experiment. This type of error is consistent and can be corrected by recalibrating the equipment.
Random error: This is an error that occurs due to the unpredictability of the experiment, and it cannot be controlled. This error is not consistent, and it is usually caused by environmental factors, such as temperature fluctuations or vibration.
To know more about energy refer to-
brainly.com/question/1932868#
#SPJ11
you are looking to setup a wittig reaction with 0.77 ml of cinnamaldehyde. using the same proportions as the experiment you did in the lab, what mass of benzyltriphenylphosphonium chloride, in grams, would you require? round the final amount to two decimal places.
The mass of benzyltriphenylphosphonium chloride required is 314.97 g.
To determine the mass of benzyltriphenylphosphonium chloride required, we need to know the molar ratio of cinnamaldehyde to benzyltriphenylphosphonium chloride in the Wittig reaction.
The general reaction for the Wittig reaction is,
aldehyde/ketone + phosphonium ylide → alkene + phosphine oxide
In this case, the cinnamaldehyde will react with the benzyltriphenylphosphonium chloride to form the desired product. The balanced equation for the reaction is:
cinnamaldehyde + benzyltriphenylphosphonium chloride → stilbene + triphenylphosphine oxide
From the balanced equation, we can see that the molar ratio of cinnamaldehyde to benzyltriphenylphosphonium chloride is 1:1.
To calculate the mass of benzyltriphenylphosphonium chloride required, we need to know its density and volume. Let's assume its density is 1 g/mL.
0.77 mL of cinnamaldehyde is equivalent to 0.77 mmol (since the molar mass of cinnamaldehyde is 132.16 g/mol).
Since the molar ratio of cinnamaldehyde to benzyltriphenylphosphonium chloride is 1:1, we also need 0.77 mmol of benzyltriphenylphosphonium chloride.
The molar mass of benzyltriphenylphosphonium chloride is 408.91 g/mol.
Therefore, the mass of benzyltriphenylphosphonium chloride required is:
0.77 mmol x 408.91 g/mol = 314.97 g
To know more about benzyltriphenylphosphonium chloride, here
brainly.com/question/15058733
#SPJ4
but in water both acids appear to be of equal strength: they are both 100% ionized. why is this so? what solvent property
High polarity of water and its ability result in the complete ionization of lactic acid and acetic acid in water In non-polar solvents, the solvation of ions is not energetically favorable, which reduces the degree of dissociation of the acid.
How we can vary with solvents?When an acid is dissolved in water, it may undergo dissociation, resulting in the formation of an anion and a hydrogen ion.
The degree of dissociation of an acid depends on its strength and the properties of the solvent.
In the case of lactic acid and acetic acid in water, both acids appear to be of equal strength and are 100% ionized. This is because water is a highly polar solvent, which plays a critical role in the ionization of these acids.
Water molecules are highly polar due to the asymmetric distribution of electrons in the molecule, which gives rise to a partial positive charge on hydrogen atoms and a partial negative charge on the oxygen atom.
As a result, water molecules can interact effectively with polar or charged species, such as ions or ionizable groups in molecules.
When an acid is dissolved in water, water molecules can surround the anion and cation produced upon dissociation of the acid.
This solvation process stabilizes the ions, reducing the overall energy required for the dissociation of the acid, leading to complete ionization.
In the case of lactic acid and acetic acid, both acids are relatively weak and have low dissociation constants (pKa values).
However, in water, the solvent molecules can effectively solvate the charged ions that are formed when the acids dissociate.
This solvation stabilizes the ions, making the dissociation of the acids more favorable, leading to complete ionization of the acids.
Therefore, the high polarity of water and its ability to stabilize charged species through solvation are the key solvent properties that result in the complete ionization of lactic acid and acetic acid in water.
In non-polar solvents, the solvation of ions is not energetically favorable, which reduces the degree of dissociation of the acid, leading to a lower ionization of the acids in such solvents.
Learn more about solvents
brainly.com/question/30452436
#SPJ11
0 out of 2.5 points incorrect in energy metabolism, many compounds have the ability to be transformed back and forth to each other through anabolic and catabolic conversions. which of these conversions is only a one-way process, where the reverse process cannot occur?
The conversion from pyruvate to acetyl-CoA is a one-way process where the reverse process cannot occur.
Pyruvate is a product of glycolysis, and it can be converted to acetyl-CoA by the enzyme pyruvate dehydrogenase. Acetyl-CoA then enters the citric acid cycle to produce energy in the form of ATP through oxidative phosphorylation.
However, once pyruvate is converted to acetyl-CoA, it cannot be converted back to pyruvate through a simple reversal of the pyruvate dehydrogenase reaction.
This is because the conversion of pyruvate to acetyl-CoA is an irreversible step that is highly exergonic, meaning it releases a large amount of free energy and cannot occur spontaneously in the opposite direction.
Other anabolic and catabolic conversions involving compounds such as glucose, amino acids, and fatty acids are generally reversible, allowing the cell to adjust its metabolic pathway depending on its energy and nutrient needs.
For more question on pyruvate click on
https://brainly.com/question/29107852
#SPJ11
22.0 ml of 0.100 m naoh is required to titrate 0.500 g of a mixture containing ascorbic acid. calculate the % ascorbic acid in the mixture. (the molar mass of ascorbic acid is 176.13 g/mol)
The balanced chemical equation for the reaction of ascorbic acid (H2C6H6O6) with NaOH is:
H2C6H6O6 + 2 NaOH → Na2C6H6O6 + 2 H2O
From the equation, we can see that 1 mole of ascorbic acid reacts with 2 moles of NaOH.
The number of moles of NaOH used in the titration is:
n(NaOH) = C(NaOH) x V(NaOH)
n(NaOH) = 0.100 mol/L x 0.0220 L
n(NaOH) = 0.00220 mol
Since 2 moles of NaOH react with 1 mole of ascorbic acid, the number of moles of ascorbic acid in the mixture is:
n(H2C6H6O6) = 0.00220 mol / 2 = 0.00110 mol
The mass of ascorbic acid in the mixture is:
m(H2C6H6O6) = n(H2C6H6O6) x M(H2C6H6O6)
m(H2C6H6O6) = 0.00110 mol x 176.13 g/mol
m(H2C6H6O6) = 0.193 g
The percentage of ascorbic acid in the mixture is:
% H2C6H6O6 = (m(H2C6H6O6) / m(mixture)) x 100%
% H2C6H6O6 = (0.193 g / 0.500 g) x 100%
% H2C6H6O6 = 38.6%
Therefore, the mixture contains 38.6% ascorbic acid.
To know more about ascorbic acid, visit the link given below:
https://brainly.com/question/28783204
#SPJ4
you have 20 gr of phosphorous that deacys 5% per day. how long will it take for half the amound to decay?
The decay of phosphorus can be modelled using exponential decay, which is given by the equation:
N(t) = N0 × [tex]e^{-kt}[/tex]
where N(t) represents the quantity of phosphorus still present at time t, N0 represents the initial quantity of phosphorus (20 g in this example), k represents the decay constant, and e represents the base of the natural logarithm (approximately equal to 2.718).
Given that the daily percentage decay is 5%, the decay constant k can be determined as follows:
k = ln(1 - 0.05)/(-1 day) ≈ 0.0513 day⁻¹
To find the time it takes for half the amount of phosphorus to decay, we can set N(t) equal to N0/2 and solve for t:
N(t) = N0/2 = N0 × [tex]e^{-kt}[/tex]
[tex]e^{-kt}[/tex] = 1/2
Taking the natural logarithm of both sides, we get:
-ln(2) = -kt
Solving for t, we get:
t = ln(2)/k ≈ 13.5 days
Therefore, it will take about 13.5 days for half of the initial amount of phosphorus (10 g) to decay.
Learn more about Phosphorous here: brainly.com/question/17959554
#SPJ4
someone help with simple science pls
Answer:
C
Explanation:
explain how a chemical catalyst helps change the rate of a chemical reaction and give two examples of actual chemical catalysis.
Catalyst helps in changing the rate of a chemical reaction by making the reaction more exothermic, which allows it to take place more quickly.
In chemistry, a catalyst is any substance that speeds up a reaction without consuming itself. Many crucial biochemical reactions are catalysed by enzymes, which are substances that occur naturally.
The majority of solid catalysts are made of metals, or the oxides, sulphides, and halides of metals, as well as of the semimetallic elements silicon, aluminium, and boron. Solid catalysts are frequently dispersed in materials known as catalyst supports, while gaseous and liquid catalysts are typically used in their pure form or in combination with appropriate carriers or solvents.
Visit here to learn more about the catalyst: https://brainly.com/question/24430084
#SPJ4
There are Blank 1 grams in one mole of ZnCl2. Please round atomic masses to the nearest whole number.
Answer ASAP please
To determine the number of grams in one mole of ZnCl2, we need to calculate its molar mass first. Zn has an atomic mass of 65 and Cl has an atomic mass of 35.5.
Since there are two Cl atoms in ZnCl2, we multiply the atomic mass of Cl by 2 to get 71.
Thus, the molar mass of ZnCl2 is:
Molar mass = Atomic mass of Zn + Atomic mass of Cl x 2
Molar mass = 65 + (35.5 x 2)
Molar mass = 136
Therefore, there are 136 grams in one mole of ZnCl2.
To know more about atomic mass, visit:
https://brainly.com/question/17067547
#SPJ1
What is the volume at STP of 1.25 mol of He?
a.
0.055 L
b. 28.0 L
C. 56 L
d. 7.52 x 1023 L
Answer: 28.0 L
Explanation:
At standard temperature and pressure, 1 mole of any gas is always 22.4 L. So, all you have to do for this problem is multiply 22.4 L by the amount of moles, 1.25.
[tex]22.4*1.25=28.0 L[/tex]
When you dissolve a non-volatile solute in a liquid ... (select all that are true)
-a) The boiling point of the solution is less than the boiling point of the pure liquid solvent
- b) The freezing point of the solution is less than the freezing point of the pure liquid solvent
- c) The vapour pressure above the solution is greater than the vapour pressure above the pure liquid solvent
- d) The vapour pressure above the solution is less than the vapour pressure above the pure liquid solvent
-e) The boiling point of the solution is greater than the boiling point of the pure liquid solvent
- f) The freezing point of the solution is greater than the freezing point of the pure liquid solvent
b) The freezing point of the solution is less than the freezing point of the pure liquid solvent
c) The vapour pressure above the solution is greater than the vapour pressure above the pure liquid solvent
e) The boiling point of the solution is greater than the boiling point of the pure liquid solvent
What is Freezing Point?
Freezing point is the temperature at which a liquid turns into a solid upon cooling, at a given pressure. It is the temperature at which the vapor pressure of the liquid phase and solid phase of a substance are equal, and hence the liquid and solid are in equilibrium. At this point, the liquid loses its fluidity and turns into a solid form.
When a non-volatile solute (one that does not evaporate easily) is dissolved in a liquid solvent, the solution's physical properties, such as boiling point, freezing point, and vapour pressure, are affected. The extent of these changes is determined by the concentration of the solute in the solution.
Learn more about Freezing Point from the given link
https://brainly.com/question/40140
#SPJ1
●
greenhouse effect simulation
Part A
Record the gas concentrations associated with each of these time periods.
(Note: ppm = parts per million)
B IUX² X₂ 10pt
Today
1750
Ice Age
Period
<
AV AEEEE
H₂0 % relative humidity
Space used (Includes formatting): 649 / 15000
CO₂ (ppm)
网 田
CH4 (ppm)
N₂0
Carbon dioxide concentrations have grown significantly since the beginning of the industrial period, going from an annual average of 280 ppm in the late 1700s to 414 ppm in 2021 – a 48 percent increase.
What are greenhouse gas concentrations?The greenhouse gas equivalent concentration has been developed in order to total their impacts on the atmosphere. This is the CO2 concentration that would produce the same amount of radiative forcing as a combination of CO2 and other greenhouse gases over a 100-year time horizon.
CO2 accounts for over 76% of global greenhouse gas emissions. Methane, largely from agriculture, accounts for 16% of worldwide greenhouse gas emissions, while nitrous oxide, primarily from industry and agriculture, accounts for 6%.
learn more about greenhouse gas
https://brainly.com/question/12684997
#SPJ1
which of the following solutions could be classified as a buffer? view available hint(s)for part a which of the following solutions could be classified as a buffer? 0.100 m hno2 and 0.100 m nano2 0.100 m hcl and 0.100 m nh4cl 0.100 m hcl and 0.100 m naoh 0.100 m hbr and 0.100 m kbr
Option A). The solution that could be classified as a buffer is 0.100 M HNO₂ and 0.100 M NaNO₂.
A buffer solution is one that resists changes in pH when small amounts of an acid or a base are added. A buffer consists of a weak acid and its conjugate base or a weak base and its conjugate acid. Among the given options, the buffer solution can be identified by following this criterion.
Option 1: 0.100 M HNO₂ and 0.100 M NaNO₂.
Here, HNO₂ is a weak acid and NaNO₂ is its conjugate base (NO2-). This pair can act as a buffer.
Option 2: 0.100 M HCl and 0.100 M NH₄Cl
HCl is a strong acid and doesn't form a buffer with its conjugate base.
Option 3: 0.100 M HCl and 0.100 M NaOH
HCl and NaOH are strong acid and strong base, respectively. They don't form a buffer solution.
Option 4: 0.100 M HBr and 0.100 M KBr
HBr is a strong acid and doesn't form a buffer with its conjugate base.
For more such questions on buffer solution
brainly.com/question/8676275
#SPJ11
The ph curve begins with a ph of
A. 0-3
B. 4-7
C. 7-10
D. 11-14
Answer:
I belive the answers is C but I'm not certain
Explanation:
None
the electrolysis of bio produces pure bismuth. how long would it take to produce 30.0 g of bi by the electrolysis of a bio solution using a current of 25.0 a?
The electrolysis of a Bi(NO3)3 solution produces Bi at the cathode according to the following equation:
Bi3+(aq) + 3e- → Bi(s)
The amount of Bi produced at the cathode is proportional to the amount of charge passed through the cell, which is given by the equation:
Q = I × t
where Q is the charge in coulombs (C), I is the current in amperes (A), and t is the time in seconds (s).
To determine the time required to produce 30.0 g of Bi using a current of 25.0 A, we need to calculate the amount of charge required to produce this amount of Bi. The molar mass of Bi is 208.98 g/mol, so the number of moles of Bi required is:
n = m/M = 30.0 g/208.98 g/mol = 0.1436 mol
According to the balanced chemical equation, 3 moles of electrons are required to produce 1 mole of Bi. Therefore, the total number of moles of electrons required is:
n(e-) = 3 × n = 0.4308 mol
The total charge required is equal to the number of moles of electrons multiplied by the charge on an electron:
Q = n(e-) × F = 0.4308 mol × 96,485 C/mol = 41,602 C
Finally, we can use the equation Q = I × t to calculate the time required to produce the necessary charge:
t = Q/I = 41,602 C/25.0 A = 1,664.1 s
Therefore, it would take 1,664.1 seconds, or about 28 minutes, to produce 30.0 g of Bi using a current of 25.0 A.
To know more about electrolysis , visit the link given below:
https://brainly.com/question/12054569
#SPJ4
the ph of a solution of 4-pyridinecarboxylic acid is measured to be . calculate the acid dissociation constant of 4-pyridinecarboxylic acid. round your answer to significant digits.
The pH of a 0.57 M solution of 4-pyridinecarboxylic acid is measured to be 2.60. The acid dissociation constant of 4-pyridinecarboxylic acid is 1.11 x 10^(-5) rounded to 2 significant digits.
The acid dissociation reaction for 4-pyridinecarboxylic acid can be represented as follows:
[tex]HCHNO_2(aq)[/tex] + [tex]H_2O(l)[/tex] ⇌ [tex]H_3O^+(aq)[/tex] +[tex]CHNO_2^-(aq)[/tex]
The acid dissociation constant, Ka, is the equilibrium constant for this process, and it is given by:
Ka =[tex][H_3O^+][CHNO_2^-][/tex] / [tex][HCHNO_2][/tex]
To determine Ka, we need to find the concentrations of the species involved in the equilibrium. We know the concentration of [tex]HCHNO_2[/tex] is 0.57 M, and the pH of the solution is 2.60.
Using the pH, we can find the concentration of [tex]H_3O^+[/tex] using the following equation:
pH = -log[[tex]H_3O^+[/tex]]
2.60 = -log[[tex]H_3O^+[/tex]]
[[tex]H_3O^+[/tex]] = 10^(-2.60) = 2.51 x 10^(-3) M
Since [tex]HCHNO_2[/tex] is a monoprotic acid, the concentration of [tex]CHNO_2^-[/tex] is equal to the concentration of [tex]H_3O^+[/tex], i.e., [[tex]CHNO_2^-[/tex]] = [[tex]H_3O^+[/tex]] = 2.51 x 10^(-3) M.
On Substituting we get:
Ka = (2.51 x 10^(-3))^2 / 0.57 = 1.11 x 10^(-5)
Therefore, the acid dissociation constant is 1.11 x 10^(-5), [rounded to 2 significant digits.]
For more such questions on acid dissociation constant, click on:
https://brainly.com/question/22668939
#SPJ11
The probable question may be:
The pH of a 0.57 M solution of 4-pyridinecarboxylic acid is measured to be 2.60. Calculate the acid dissociation constant K, of 4-pyridinecarboxylic acid. Round your answer to 2 significant digits
n the following atomic model, where does the strong nuclear force happen? A diagram of an atom has three rings, labeled from outside to inside A, B, and C. A and B each carry two electrons. Inside ring C are 4 protons and 5 neutrons. outside A between A and B between B and C inside C Mark this and return
An atom's diagram consists of three rings, which are named A, B, and C from outside to inside. Every single electron in A and B. Inside ring C, there are 4 protons and 5 neutrons. The location of the strong nuclear force in the atomic model below is C.
What causes the strong nuclear force?The exchange of particles known as mesons between nucleons produces the strong nuclear force. This interaction can be compared to two persons repeatedly striking a tennis ball or ping-pong ball back and forth.
What is the atomic Rutherford model?The model depicted the atom as having a nucleus, which is a small, dense, positively charged centre around which the lighter, negatively charged outer layers orbit.
To know more about single electron visit:-
https://brainly.com/question/16360147
#SPJ1
Question:
In the following atomic model, where does the strong nuclear force happen? A diagram of an atom has three rings, labeled from outside to inside A, B, and C. A and B each carry two electrons. Inside ring C are 4 protons and 5 neutrons. outside A between A and B between B and C inside C
what is the solubility in moles/liter for copper(ii) oxalate at 25 oc given a ksp value of 2.9 x 10-8. write using scientific notation and use 1 or 2 decimal places (even though this is strictly incorrect!)
The solubility product constant expression for copper(II) oxalate is:
CuC₂O₄(s) ⇌ Cu²⁺(aq) + C₂O₄²⁻(aq)
The Ksp value given is 2.9 x 10⁻⁸ at 25°C.
Let's assume that "x" is the molar solubility of C₂O₄²⁻ in water, then the equilibrium concentrations of Cu²⁺ and C₂O₄²⁻ ions are also "x" because 1 mol of C₂O₄²⁻ produces 1 mol of Cu²⁺ and 1 mol of C₂O₄²⁻
So, it can be written as:
Ksp = [Cu²⁺ ][C₂O₄²⁻ ] = x²
Substituting the given Ksp value, we get:
2.9 x 10⁻⁸ = x²
Taking the square root of both sides gives:
x = 1.7 x 10⁻⁴ M
Therefore, the solubility of copper(II) oxalate at 25°C is 1.7 x 10⁻⁴ moles/litre, rounded to two decimal places.
Learn more about copper(II) oxalate, here:
https://brainly.com/question/15225438
#SPJ4
A cube of sides 2cm has a mass of 100g. Determine its density
The density of the cube with sides of 2cm and a mass of 100g is 12.5 g/cm³.
How to calculate the density of the cube?
The density of the object is defined as its mass-per-unit volume. In this case, we know the mass of the cube and we can calculate its volume as the cube of the length of its sides.
The volume of the cube is:
V = (2 cm)³ = 8 cm³
Next, The density can be calculated using the following formula:
Density = mass / volume
Density = 100 g / 8 cm³ = 12.5 g/cm³
Therefore, the density of the cube is 12.5 g/cm³.
To learn more about density, visit: https://brainly.com/question/28348989
#SPJ1
g an electrolytic cell is an electrochemical cell in which the redox reaction occurs spontaneously group of answer choices true false
False. An electrolytic cell is an electrochemical cell in which an external electric current is used to drive a non-spontaneous redox reaction. In contrast, a galvanic or voltaic cell is an electrochemical cell in which a spontaneous redox reaction generates an electric current.
The process involves applying an external voltage to drive an otherwise non-spontaneous reaction, resulting in a flow of electrons through the external circuit. In an electrolytic cell, the anode is the electrode at which oxidation occurs, while the cathode is the electrode at which reduction occurs. The electrolyte solution contains ions that are reduced or oxidized at the electrodes. Electrolytic cells are used in various industrial processes, such as the production of metals and the purification of substances.
Find out more about electrolytic cell
brainly.com/question/31355338
#SPJ4
the color of a transition metal complex results from: a. transition of an electron between an s and a p orbital b. bending vibrations c. stretching vibrations d. transition of an electron between d orbitals e. nuclear magnetic resonance
When a transition metal complex absorbs visible light, the color that results from the electronic (d) transition between d orbitals.
The d-block elements that are found in Groups 3–12 of the periodic table are known as transition metals.
They are known as transition metals because they possess characteristics that are typical of both metals and nonmetals, as well as properties that are unique to themselves.
A complex is a substance in which a central metal atom is bound to one or more ligands by covalent bonds.
The ligands are ions or molecules that have an unshared pair of electrons that they donate to the metal. The donor atoms in the ligands form a coordination compound with the central atom.
In the transition metal complexes, the colors that we observe are due to electronic transitions from d-d transitions of metal ions.
The color of transition metal complexes is caused by electronic transitions between d orbitals. This occurs when a transition metal complex absorbs visible light.
To know more about periodic table, refer here:
https://brainly.com/question/11155928#
#SPJ11
Vector L is 65.4 units long in a
-98.7° direction. In unit vector
notation, this would be written
as:
The vector L can be written in unit vector notation as L = 14.5i - 63.8j. To write the vector L in unit vector notation, we first need to find its components in the x- and y-directions.
The magnitude of the vector L is 65.4 units, and its direction is -98.7°.
The x-component of L can be found by multiplying the magnitude of L by the cosine of its direction angle:
Lx = 65.4 cos(-98.7°) = 14.5
The y-component of L can be found by multiplying the magnitude of L by the sine of its direction angle:
Ly = 65.4 sin(-98.7°) = -63.8
Therefore, the vector L can be written in unit vector notation as:
L = 14.5i - 63.8j
To know more about the magnitude, visit:
https://brainly.com/question/14452091
#SPJ1
given a choice of atoms, which atom should you put in the center of a lewis structure? question 10 options: the atom that is nearer to the right and lowest down on the periodic table. the atom that is nearer to the right and highest up on the periodic table. the atom that is nearer to the left and highest up on the periodic table. the atom that is nearer to the left and lowest down on the periodic table
When given a choice of atoms, the atom that should be put in the center of a Lewis structure is the atom that is nearer to the right and highest up on the periodic table.
A Lewis structure is a model that shows how electrons are arranged in an atom, molecule, or ion. Lewis structures depict bonding in molecules, including covalent bonds, and the arrangement of electrons. The Lewis structure of a molecule or polyatomic ion is a two-dimensional representation that uses lines to depict covalent bonds and dots to depict lone electron pairs.
Based on electronegativity, the atom that should be placed in the center of a Lewis structure is the atom with the highest electronegativity. Electronegativity is the measure of the tendency of an atom to draw electrons towards itself when in a chemical bond. The atom that is closer to the top right corner of the periodic table, typically non-metals, has higher electronegativity than the ones in the lower left corner, typically metals.
The other options - the atom that is nearer to the right and lowest down on the periodic table, the atom that is nearer to the left and highest up on the periodic table, the atom that is nearer to the left and lowest down on the periodic table - are incorrect as they do not follow the rules of electronegativity.
More on atoms: https://brainly.com/question/31265348
#SPJ11
between 1980 and 2010, atmospheric co2 levels increased from 330 ppm to 390 ppm. what is the average annual increase of co2 in the atmosphere? group of answer choices
The average annual increase of [tex]CO_{2}[/tex] in the atmosphere is 60ppm divided by 30 years, which equals 2.0ppm/year. Thus, the correct answer is d) 2.0.
The atmospheric [tex]CO_{2}[/tex] levels increased from 330ppm to 390ppm between 1980 and 2010, indicating a significant rise in atmospheric carbon dioxide concentration. To calculate the average annual increase of [tex]CO_{2}[/tex] in the atmosphere, we need to divide the total increase in concentration by the number of years.
Final concentration - Initial concentration = 390ppm - 330ppm = 60ppm
Number of years = 2010 - 1980 = 30 years
Average annual increase = 60ppm / 30 = 2.0
The total increase in concentration is the final concentration (390ppm) minus the initial concentration (330ppm), which equals 60ppm. The number of years between 1980 and 2010 is 30 years.
Therefore, the average annual increase of [tex]CO_{2}[/tex] in the atmosphere is 60ppm divided by 30 years, which equals 2.0ppm/year. Thus, the correct answer is d) 2.0.
Learn more about annual increase
https://brainly.com/question/8824330
#SPJ4
Full Question ;
Between 1980 and 2010, atmospheric CO2 levels increased from 330ppm to 390ppm. what is the average annual increase of CO2 in the atmosphere?
a) 0.5
b) 1.0
c) 1.5
d) 2.0
stoichiometry question… how do i do these 2 problems??
The mass of magnesium chloride produced is 179.15 grams.
The balanced chemical equation for the reaction is:
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)
From the equation, we can see that 1 mol of Mg reacts with 2 mol of HCl to produce 1 mol of MgCl₂ and 1 mol of H₂.
So, to determine the limiting reactant, we need to calculate the moles of MgCl₂ that can be formed from each reactant:
Moles of MgCl₂ from Mg = 3.79 mol Mg × (1 mol MgCl₂/1 mol Mg) = 3.79 mol MgCl₂
Moles of MgCl₂ from HCl = 3.75 mol HCl × (1 mol MgCl₂/2 mol HCl) = 1.88 mol MgCl₂
Since the amount of MgCl₂ that can be formed is limited by the amount of HCl available, HCl is the limiting reactant.
The stoichiometry of the reaction tells us that 2 moles of HCl react to produce 1 mole of MgCl₂. Therefore, the number of moles of MgCl₂ produced in the reaction is:
1.88 mol MgCl2
Finally, we can use the molar mass of MgCl2 to calculate the mass produced:
Molar mass of MgCl₂ = 95.211 g/mol
Mass of MgCl₂ produced = 1.88 mol × 95.211 g/mol = 179.15 g.
Learn more about magnesium chloride here:
https://brainly.com/question/30671024
#SPJ1
What temperature in degree Celsius is needed to 3 change 2.5 dm³ of Nitrogen at 2 atm and 300 K to 3.0 dm³ and 2.5 atm?
Answer:
the temperature needed to change 2.5 dm³ of nitrogen at 2 atm and 300 K to 3.0 dm³ and 2.5 atm is approximately 450 degrees Celsius.
Explanation:
To solve this problem, we can use the combined gas law:
(P1 * V1) / (T1) = (P2 * V2) / (T2)
Where P is pressure, V is volume, and T is temperature.
We are given:
P1 = 2 atm
V1 = 2.5 dm³
T1 = 300 K
And we are asked to find T2 when:
V2 = 3.0 dm³
P2 = 2.5 atm
Substituting these values into the combined gas law, we get:
(2 atm * 2.5 dm³) / (300 K) = (2.5 atm * 3.0 dm³) / (T2)
Simplifying this equation, we get:
T2 = (2.5 atm * 3.0 dm³ * 300 K) / (2 atm * 2.5 dm³)
T2 = 450 K
a sample of hydrogen gas was collected over water at 25 degree c and a pressure of 0.981 atm. what is the pressure of the dry hydrogen kpa
The pressure of dry hydrogen is 99.374 kPa.When collecting gas over water, the vapor pressure of water must be taken into account. The total pressure is the sum of the pressure of the collected gas and the vapor pressure of water at the given temperature.
At 25 degrees Celsius, the vapor pressure of water is 23.76 mmHg or 3.169 kPa. Therefore, the total pressure is:
P(total) = P(H2) + P(H2O)
We need to convert the pressure of hydrogen from atm to kPa:
P(H2) = 0.981 atm × 101.325 kPa/atm = 99.374 kPa
Substituting the values, we get:
P(total) = 99.374 kPa + 3.169 kPa = 102.543 kPa
This is the total pressure of the gas mixture. To calculate the pressure of dry hydrogen, we need to subtract the vapor pressure of water:
P(H2,dry) = P(total) - P(H2O) = 102.543 kPa - 3.169 kPa = 99.374 kPa
Find out more about hydrogen gas
brainly.com/question/11913050
#SPJ4
A metal tank containing 7.75 moles of oxygen is at 295 K with an internal pressure of 179
atmospheres. What is the volume of this tank at these conditions?
I NEED HELP ASAP
Answer:
The volume of the tank can be calculated using the ideal gas law, which states that PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature.
In this case, we have P = 179 atm, n = 7.75 moles, R = 0.08206 Latm/(Kmol), and T = 295 K. Plugging these values into the ideal gas law equation and solving for V gives us:
V = (nRT)/P V = (7.75 moles * 0.08206 Latm/(Kmol) * 295 K) / (179 atm) V ≈ 1.01 L
So the volume of this tank at these conditions is approximately 1.01 liters.
Explanation:
Answer:
Volume = 1.05 L (3 s.f.)
Explanation:
To find the volume of the tank, we can use the ideal gas law.
Ideal Gas Law[tex]\boxed{\sf PV=nRT}[/tex]
where:
P is the pressure measured in atmospheres (atm).V is the volume measured in liters (L).n is the number of moles.R is the ideal gas constant (0.082057366080960 L atm mol⁻¹ K⁻¹).T is the temperature measured in kelvin (K).The given values are:
P = 179 atmn = 7.75 molR = 0.082057366080960 L atm mol⁻¹ K⁻¹T = 295 KSubstitute the given values into the formula and solve for V:
[tex]\implies \sf 179 \cdot V=7.75 \cdot 0.082057366080960\cdot 295[/tex]
[tex]\implies \sf V=\dfrac{7.75 \cdot 0.082057366080960\cdot 295}{179}[/tex]
[tex]\implies \sf V=\dfrac{187.6036532 \dots }{179}[/tex]
[tex]\implies \sf V=1.04806510 \dots\;L[/tex]
[tex]\implies \sf V=1.05\;L\;(3\;s.f.)[/tex]
Therefore, the volume of the tank in these conditions is 1.05 liters (3 s.f.).
the initial boiling point should be a little less than 100 c, but the final bp should be 100 c. why should the bp rise as the distillation progresses
Answer:
A liquid's boiling point (BP) is the temperature at which it transitions from a liquid to a gas phase. The BP of the liquid being distilled changes as the process continues during distillation.
A liquid mixture's initial BP should be lower than its final BP because the initial BP reflects the temperature at which the mixture's most volatile components evaporate and the final BP indicates the temperature at which the mixture's least volatile components vaporize.
The concentration of the more volatile components in the liquid mixture reduces as the distillation advances, which causes the BP to rise. This implies that the vapor generated has fewer volatile components and more of the less volatile components. Because the boiling points of the less volatile components are higher, the temperature of the vapor in the distillation apparatus must be raised to guarantee that these components also evaporate and are collected.
Explanation:
Examining the vapor-liquid equilibrium curve for the combination being distilled can help explain why the BP grows as the distillation advances. The connection between temperature and the composition of the vapor and liquid phases in equilibrium at a particular pressure is depicted by this curve.
The vapor generated at the start of the distillation has a high concentration of the more volatile components. As the distillation process advances, the concentration of these components in the liquid diminishes, causing the vapor's composition to shift towards the less volatile components.
The temperature at which the vapor is in equilibrium with the liquid changes as its composition changes. To evaporate the less volatile components with higher boiling points, the temperature must be raised. This implies that as the distillation advances, the BP of the mixture will rise, with the final BP denoting the temperature at which all of the components in the mixture have been vaporized and collected.
Know more about
https://brainly.com/question/24101551
As the distillation progresses, the boiling point (BP) should rise. The BP of a substance is the temperature at which its vapor pressure is equal to the atmospheric pressure.
When the distillation begins, the temperature at which the liquid begins to boil is known as the initial boiling point (IBP).The IBP for a mixture containing several liquids is typically lower than 100°C because the vapor pressure is generated from the liquid with the lowest boiling point. As the temperature rises, the vapor pressure of the other liquids in the mixture starts to rise as well, causing them to boil off. The temperature at which the last component boils off is known as the final boiling point (FBP). The FBP should be about 100°C since the atmospheric pressure is typically 1 atm or 760 mmHg. Therefore, the BP of a substance rises as distillation progresses.
To know more about boiling point click here:
brainly.com/question/14771622
#SPJ11
Hello can you please solve the question below in the photo
Answer:
6.00x10^-6 moles of salt in the test tube.
Explanation:
See the attached worksheet. The first step is to determine the concentration of the original, in M (moles/liter). Be sure to accomodate the different units. 1 liter = 1000 ml.
Molar is the accepted measure of concentration in the sceinces. It is defined as 1 mole/1 liter.