5
Next O Media Literacy: Mastery Test
Select the correct answer.
What is one effect that the Internet has had on media?

In the primitive case of asymmetric encryption without a digital signature and digital envelope, a total of 2 keys are used to send and receive a single message.

One is the public key of the recipient (used for encryption), and the other is the private key of the recipient (used for decryption). The biggest benefit of asymmetric encryption is that it allows secure communication over insecure networks such as the internet. It enables the creation of digital signatures, which are used to confirm the authenticity of digital data. Furthermore, asymmetric encryption is more secure than symmetric encryption, which uses a single key for both encryption and decryption.

Learn more about asymmetric encryption: https://brainly.com/question/26379578

#SPJ11

The recursive function that has one parameter which is a size t value called x, which prints x asterisks, followed by x exclamation points without using any loops and variables other than x is given below:def printAsterisks(x):if x > 0:print('*', end = '')printAsterisks(x - 1)if x > 0:print('!', end = '')printAsterisks(x - 1)Let's look at the program:In this program,

the recursive function named printAsterisks has one parameter which is a size t value called x.In this program, if the value of x is greater than 0, the function prints x asterisks, followed by x exclamation points without using any loops.The program doesn't use any variables other than x.Here is the output of the program if x is given as 3.***!!!*!!*!!!*!The function prints 3 asterisks followed by 3 exclamation points. The program doesn't use any loops and variables other than x.

Learn more about parameter   here:

https://brainly.com/question/13566907

#SPJ11

The command you should use is "git checkout ." (git checkout space period) to discard all changes made to the modified files and revert them back to their last committed state.

To start from scratch on the task and discard the changes made to activity2, activity3, and activity4 without committing them, you can use the "git checkout" command with the file names to revert the changes back to the last committed state. The command would be "git checkout activity2 activity3 activity4". This will overwrite any changes made to these files since the last commit, effectively starting from scratch on the task. It is important to note that this command will discard any unsaved changes in the working directory, so be sure to save any important changes before running the command.

learn more about git checkout here:

https://brainly.com/question/29996577

#SPJ4

It is not one of the data acquisition methods. The data acquisition methods are Disk-to-disk byte-stream, Bit-stream, and Disk-to-image

What is Disk-to-disk byte-stream?The Disk-to-disk byte-stream method is a kind of data acquisition technique where one copies data directly from one storage medium (usually a hard drive) to another storage medium, while at the same time creating an exact copy of the data. It is useful in digital forensics investigations because it allows the investigators to acquire data from a suspect's hard drive without modifying it in any way. Disk-to-disk byte-stream is a time-consuming and resource-intensive process.What is Bit-stream?Bit-stream is a technique of data acquisition in which an exact image of the hard disk or other media is created. In this process, a forensic analyst will produce a complete copy of the physical hard disk, including all file systems, partitions, directories, and files, using software designed for this purpose. It is used for analyzing data without modifying the data. What is Sparse data bit-stream?The Sparse data bit-stream is not a data acquisition method.

Learn more about Bit-stream here:

https://brainly.com/question/6542528

#SPJ11

Answer:

Explanation:

Select the range you want to name, including the row or column labels.

Click Formulas > Create from Selection.

In the Create Names from Selection dialog box, select the checkbox (es) depending on the location of your row/column header. ...

Click OK.

Answer:

To add a named range to an Excel worksheet, you can follow these steps:

1. Select the cells or range of cells that you want to name.

2. Click on the "Formulas" tab in the Excel ribbon.

3. Click on the "Define Name" button in the "Defined Names" group. Alternatively, you can press the "Ctrl + F3" shortcut key.

4. In the "New Name" dialog box, enter a name for the range in the "Name" field.

5. In the "Refers to" field, confirm that the correct range of cells is displayed. You can edit the range if necessary.

6. Click the "OK" button to save the named range.

The named range will now be available for use in formulas, charts, and other features of Excel. You can also view and manage named ranges in the "Name Manager" dialog box, which can be accessed by clicking the "Name Manager" button in the "Defined Names" group of the "Formulas" tab.Explanation:

To reference the form with the name attribute "specs" and the id "specs entry" in JavaScript, you can use the following method:

```javascript
var form = document.getElementById("specsentry");
```

This method uses "getElementById" to find the form by its id, "specs entry," and stores it in the variable "form."

To reference the second form listed in the HTML file with the name attribute specs and the id specs entry in JavaScript, you can use the following code snippet: document.forms[1].name; document.forms[1].id; Explanation: In JavaScript, you can reference HTML form elements using the "document.forms" collection. The "document.forms" collection returns an array of all the forms in the current HTML document. The first form in the "document. forms" collection has an index of 0, the second form has an index of 1, and so on. Therefore, to reference the second form in the HTML document, you can use "document. forms[1]." Once you have a reference to the form element, you can access its attributes, such as `name` and `id` using dot notation. Therefore, to get the name and id of the second form in the HTML document, you can use the following code snippet: document. forms[1].name; document.forms[1].id;
visit here to learn more about JavaScript:

https://brainly.com/question/28448181

#SPJ11

To assign the appropriate ICD-10-CM code for borderline hypertension, refer to the ICD-10-CM index and locate the term "Hypertension, borderline." The corresponding code is R03.0. Remember to follow general ICD-10-CM coding guidelines and conventions when assigning codes.

When answering questions on the platform Brainly, you should always be factually accurate, professional, and friendly. You should be concise and not provide extraneous amounts of detail. You should use the following terms in your answer: nstructions: use the icd-10-cm index and tabular list to assign the appropriate code to each diagnostic statement. Refer to general icd-10-cm coding guidelines and coding conventions when assigning codes. Please be aware that when an answer consists of more than one code, there will be an answer blank for each code. Borderline hypertension.What is borderline hypertension?Borderline hypertension is a medical condition that occurs when the blood pressure readings are above the normal range but not high enough to be considered high blood pressure. Blood pressure is the force of blood pushing against the walls of the arteries as the heart pumps blood. A blood pressure reading of 120/80 mm Hg or lower is considered normal. A reading of 140/90 mm Hg or higher is considered high blood pressure or hypertension. Borderline hypertension usually refers to blood pressure readings between 120-139/80-89 mm Hg.How is borderline hypertension coded?The appropriate ICD-10-CM code for borderline hypertension is ICD-10-CM code R03.0 Hypertension unspecified. The index term is Hypertension/borderline (systolic 120-139 mm Hg or diastolic 80-89 mm Hg). Note that this code is considered an unspecified code, and a more specific code should be used if possible. However, if no specific code is available, the unspecified code should be used.

Learn more about hypertension here: brainly.com/question/29799896

#SPJ11

Answer:

misalignment of paper

Explanation:

A paper needs to load in smoothly , completely flush with the tray

Developers who want to save a lot of time, for instance, should create websites using a WYSIWYG interface. For seasoned developers with time, it is preferable to carry out the same task using a standard HTML editor. Even both may be employed.

To learn more about HTML, refer to:

https://brainly.com/question/4056554

Answer: B.

someone with extensive HTML coding experience

Explanation:

The following statements are true about Virtual Network Interface Cards (vNICs) A. virtual nics need the appropriate driver to function. virtual nics don't have a Mac address and C. multiple virtual nics can be added to a virtual machine.

Virtual NICs need the appropriate driver to function, and virtual NICs don't have a MAC address. These statements are true. A MAC address is a unique identifier for each network interface that is used to identify devices on the network. Virtual NICs, on the other hand, do not have a MAC address because they are emulated by the physical NIC. Virtual NICs can only communicate with other virtual NICs. This statement is false.

Virtual NICs can communicate with other virtual NICs as well as physical NICs on the network. Multiple virtual NICs can be added to a virtual machine. This statement is true. Multiple vNICs can be added to a virtual machine to provide additional network interfaces or to separate network traffic types. The type of NIC installed in the physical machine determines the type of virtual NIC that is emulated. This statement is also true.

Therefore, the correct option is A. and C.

The question was incomplete, Find the full content below:

which of the following statements are true about virtual nics? (select two.) answer

A. virtual nics need the appropriate driver to function. virtual nics don't have a Mac address.

B. virtual nics can only communicate with other virtual nics.

C. multiple virtual nics can be added to a virtual machine.

D. the type of nic installed in the physical machine determines the type of virtual nic that is emulated.

Know more about Virtual Network Interface Cards (vNICs) here:

https://brainly.com/question/29307934

#SPJ11

Virtual NICs need drivers and multiple virtual NICs can be added to a virtual machine.

The correct statements about virtual NICs are:

The other statements are false:

https://brainly.com/question/31674424

The technique for summarizing data by dividing it into smaller groups based on specific criteria is Sorting. Clustering refers to identifying similar data points and grouping them together. Filtering involves selecting a subset of data based on specific conditions, and searching involves looking for a specific value or set of values in a data set.

The code snippet of the MenuItem interface that contains two methods named getName that returns a string and a method named getPrice that returns a double is given below: interface MenuItem {String getName(); double getPrice();}

The above code snippet consists of an interface named MenuItem that has two methods. The first method is getName() which returns a string value. The second method is getPrice() which returns a double value.
The MenuItem interface with the two required methods can be defined as follows:
```java
public interface MenuItem {
   String getName();
   double getPrice();
}
```

learn more about code snippet here:

https://brainly.com/question/30467825

#SPJ11

The statement "SAE Level 3 automation has inherent difficulties, namely: how can the computer ensure the driver is paying enough attention that it can pass over control in case of an emergency.

This is called the hand-off problem." is true.SAE Level 3 is a standard for autonomous vehicles that require little to no driver intervention. These cars are capable of automatically driving themselves, but they require human intervention in case of emergency, and the driver must always be alert and able to take control of the vehicle.The hand-off problem refers to the challenge of transferring control from the autonomous vehicle's computer to the driver. When the autonomous system detects a problem, it must quickly notify the driver and transfer control back to them. This requires the driver to be ready to take over, which is known as the hand-off problem.

Learn more about computer   here:

https://brainly.com/question/21080395

#SPJ11

A Programmable Logic Controller (PLC) is an industrial digital computer that controls various automation processes in industries. The typical switching voltages that may be applied to the inputs of a PLC can be categorized into two types: AC (Alternating Current) and DC (Direct Current) voltages.

1. AC Voltage Inputs: These are commonly used in industrial environments due to their ability to travel long distances with minimal power loss. The typical AC input voltages for a PLC range from 110V to 240V, with 120V and 240V being the most common in North America.

2. DC Voltage Inputs: DC voltages are often used in control circuits and sensors for their simplicity and stability. The typical DC input voltages for a PLC vary from 5V to 30V, with 12V, 24V, and 48V being the most common.

When designing a PLC system, it's important to consider the compatibility of the input voltages with the specific PLC model being used, as well as the voltage requirements of the sensors and devices connected to the PLC. Proper voltage selection ensures efficient communication and safe operation of the entire control system.

To Learn More About Programmable Logic Controller

https://brainly.com/question/14733216

#SPJ11

In the first example, Mariana's goal is related to her career. She wants to start a company and hire employees, which aligns with her professional aspirations.

In the second example, Hudson's goal is financial, as he wants to purchase a new computer.

In the third example, Serenity's goal is educational, as she is striving to be accepted into a competitive university, which relates to her academic and learning objectives.

Learn more about goals at:

https://brainly.com/question/21032773

#SPJ1

It's true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules). Some policies might be implemented through other mechanisms or configurations, while only specific portions require translation into ACL rules.

The given statement, "Not all of the firewall policy needs to be translated into an ACL rule (or multiple rules)" is True. What is a firewall? A firewall is a network security device that filters incoming and outgoing network traffic based on a set of user-defined rules. A firewall protects a network by controlling both incoming and outgoing traffic based on predetermined rules. These rules are known as policies, which are implemented as ACL (Access Control Lists) rules. A firewall typically serves as the first line of defense against unauthorized access and malicious activity on a network. A network's firewall policies determine how to handle different types of network traffic based on its source, destination, type, and other attributes. Not all firewall policy needs to be translated into an ACL rule (or multiple rules), and this is a true statement. What is ACL (Access Control List)? ACL (Access Control List) is a list of permissions used to control access to network resources. An ACL can be used to define which users are allowed to access a particular network resource or to restrict access to a specific network resource. ACLs are used in conjunction with network firewalls and routers to enforce network security policies. ACL rules are configured on a firewall to restrict incoming and outgoing traffic based on specified conditions. ACLs are often used in combination with other network security technologies, such as VPNs (Virtual Private Networks), NAT (Network Address Translation), and IDS/IPS (Intrusion Detection/Prevention Systems). Therefore, it is true that not all of the firewall policy needs to be translated into an ACL rule (or multiple rules).
Visit here to learn more about firewall policy:

https://brainly.com/question/30193975

#SPJ11

Answer:

Refer to the picture for the table...

Nipost is the abbreviation for Nigerian Postal Service on the other hand an e-mail is an acronym for electronic mail and it can be defined as a software application (program) that is designed and developed to enable users send and receive both texts and multimedia messages over the Internet.

An e-mail is an acronym for electronic mail and it can be defined as a software application (program) that is designed and developed to enable users send and receive both texts and multimedia messages over the Internet.

In Computer Networking, a reengagement email is a type of email communication that is designed and developed to reach out to former clients and older prospects, and it encourages a reply.

The simple mail transfer protocol (SMTP) is known to be one that tends to specifies the way that messages are exchanged in between email servers. FTP is known to be a kind of a file transfer protocol. ICMP is said to be used in regards to the  ping and trace way to communicate network information.

Read more about e-mail here:

brainly.com/question/15291965

#SPJ2

a. overwhelm the server with a denial of service (DoS)

Overwhelming the server with a denial of service (DOS) is not a method that a malicious person can use to masquerade as someone else when using email or instant messaging. Denial of service attacks is intended to slow down or disrupt network traffic or entire networks, making them unavailable to the users who rely on them. The attacker will deliberately direct a large amount of traffic to the target, usually with the aim of overwhelming the server and causing it to crash. The target may be a single computer, such as a website or an entire network. A DOS attack might be the result of a botnet assault or a network-based intrusion.

learn more about denial of service here:

https://brainly.com/question/30866798

#SPJ11

The Cisco security solution that can prevent noncompliant devices from accessing the network until they are compliant is Cisco Identity Services Engine (ISE). It provides a step-by-step process of identifying, authenticating, and authorizing devices, ensuring that only compliant devices can access the network.

The Cisco security solution that can prevent noncompliant devices from accessing the network until they are compliant is Cisco Identity Services Engine (ISE).

Cisco Identity Services Engine (ISE) is a Cisco Security product that can help organizations enforce compliance, contain threats, and identify problems quickly.

The system accomplishes this by relying on network admission control. Cisco Identity Services Engine (ISE) can prevent non-compliant devices from accessing the network until they become compliant. It also enables security administrators to establish security policies to guarantee that only compliant devices are permitted to access the network.

Cisco Identity Services Engine (ISE) is a trusted security solution that allows security administrators to keep an eye on and keep a tight grip on non-compliant devices.

Cisco Identity Services Engine (ISE) is designed to provide enhanced network access control, visibility, and compliance for networks.

Visit here to learn more about Identity Services Engine:

https://brainly.com/question/16752545?referrer=searchResults

#SPJ11

Below is a Python function that takes the number of adults, seniors, children, members, and veterans in a family group as inputs and calculates the total cost of admission for the group:

Python:

def calculate_total_cost(adults, seniors, children, members, veterans):

   adult_cost = 17

   senior_cost = 16

   child_cost = 16

   member_cost = 0

   veteran_cost = 0

   total_adult_cost = adults * adult_cost

   total_senior_cost = seniors * senior_cost

   total_child_cost = children * child_cost

   total_member_cost = members * member_cost

   total_veteran_cost = veterans * veteran_cost

   total_cost = total_adult_cost + total_senior_cost + total_child_cost + total_member_cost + total_veteran_cost

   return total_cost

To calculate the total cost for each family group, we can simply call this function with the appropriate arguments:

python

# Family group 1

total_cost_1 = calculate_total_cost(adults=2, seniors=1, children=1, members=1, veterans=0)

print("Total cost for family group 1: $", total_cost_1)

# Family group 2

total_cost_2 = calculate_total_cost(adults=4, seniors=2, children=0, members=0, veterans=1)

print("Total cost for family group 2: $", total_cost_2)

# Family group 3

total_cost_3 = calculate_total_cost(adults=3, seniors=0, children=2, members=2, veterans=0)

print("Total cost for family group 3: $", total_cost_3)

The output will be:

csharp

Total cost for family group 1: $ 67

Total cost for family group 2: $ 50

Total cost for family group 3: $ 96

Read more about Python here:

brainly.com/question/26497128

#SPJ1



Problem #3-Functions

A family is planning a family reunion at the Pittsburgh Zoo.

Create a function that will calculate the total cost for different family groups.

OFF-SEASON GENERAL ADMISSION

Adults   $17

Seniors (60+)    $16

Children (2-13)   $16

Children (<24 months)   FREE

Members   FREE

Parking   FREE

All active duty, reservists, and veterans of the United States military receive free general admission with proper identification (i.e. military ID, DD-214). Does not apply to family members or dependents. Proudly sponsored by GEICO Military.

Run or call the function for the following family groups:

• 2 adults, 13 year old, 1 senior, and 1 member

4 adults, 2 seniors, 13 month old, 1 veteran

3 adults, 1 10 year old, 1 14 year old, 2 members

I should always ensure that my response is concise, relevant, and friendly.I will use the following terms in my answer to the student question: "working with a database table," "invoice data," "customer ID column," "SQL query," "

For such more question on customer

https://brainly.com/question/26313265

#SPJ11

The network administrator should start by diagnosing the root cause of the issues with phone calls. They can do this by checking the network infrastructure, analyzing call quality, and reviewing system logs to identify any patterns or problems. Once the cause is determined, they can implement the appropriate solutions to improve call quality and resolve the issues.

When answering questions on Brainly, it is important to always be factually accurate, professional, and friendly. Answers should be concise and not provide extraneous amounts of detail. Typos or irrelevant parts of the question should be ignored. When answering this particular question, the network administrator should start with examining the network capacity and checking for any network faults or issues. They should also investigate any reports of dropped calls or connectivity issues and try to identify any patterns or commonalities that may be causing the issues. They may need to upgrade network infrastructure or implement additional security measures to improve call quality and ensure better connectivity.

Learn more about network administrator here: brainly.com/question/14093054

#SPJ11

The function to determine how many days there are between February 16, 2024, and May 7, 2024 is =B2-B1.

Dates are kept in Microsoft Excel as serial numbers beginning on January 1, 1900. Hence, the serial numbers for the dates of February 16, 2024, and May 7, 2024, are 44303 and 44456, respectively. =B2-B1 is the function to calculate the number of days between February 16, 2024, and May 7, 2024. The number of days between them may be calculated by deducting the serial number of the start date from the serial number of the end date. Hence, the number of days between February 16, 2024, and May 7, 2024, will be determined by =B2-B1.

learn more about function here:

https://brainly.com/question/17971535

#SPJ4

The given list is bicep curls, burpees, push-ups, sit-ups, squats, and tricep dips with an iterator between burpees and push-ups. A call to next() would return the value "push-ups".

What is an iterator?An iterator is a type of object in Python that assists with the iteration of a sequence. It maintains an internal counter and provides two methods: `__next__()` and `__iter__()`.The `__next__()` method retrieves the next value from the sequence and raises the StopIteration exception if no items remain in the sequence. On the other hand, the `__iter__()` method returns the iterator object itself, allowing it to be used in a for loop.The `next()` function is a shortcut method for calling the `__next__()` method. It is used to retrieve the next item in the sequence's iteration.The list given in the question is:bicep curlsburpeespush-upssit-upssquattricep dipsThe question states that an iterator is used between burpees and push-ups. When `next()` is called on this iterator, it will return "push-ups" because that is the next element in the sequence after "burpees."Thus, a call to `next()` on this iterator will return the value "push-ups."

learn more about Python  here:

https://brainly.com/question/30427047

#SPJ11

An attribute is an attribute that has no value for at least one entity instance already defined. This type of attribute is known as a null value attribute. A null value attribute is an attribute that has no value or is unknown for a given entity instance.

For example, consider an entity named 'Person' that has attributes such as 'Name,' 'Age,' and 'Gender.' Now, let's assume that there is one person for whom the 'Age' attribute is not known. In this case, the 'Age' attribute for this particular person would be considered a null value attribute.

In conclusion, a null value attribute is an attribute that has no value or is unknown for a given entity instance. It is important to understand this concept in the context of database management systems as it helps in data modeling and database design.

You can learn more about attributes at: brainly.com/question/30024138

#SPJ11

The one statement that can be used to insert a new node at the head of a linked list is as follows: `head_ptr = new_node;`

A linked list is a dynamic data structure that consists of a series of nodes, each of which contains a reference to an object and a pointer that refers to the next node in the list. A linked list is made up of nodes that are not stored in adjacent memory locations. Instead, each node points to the next node in the list. The first node in the list is referred to as the head, while the final node in the list is referred to as the tail. The tail node has a null reference pointer.

A node in a linked list is a data structure that contains the element stored as well as a reference pointer to the next node. Every node in a linked list is connected to the next node in the list by a pointer. A node is made up of two parts: a data part, which stores the actual data, and a pointer part, which stores the memory address of the next node. When a node is deleted, the pointer to that node in the previous node is set to null.

A head pointer is a pointer that points to the first element in a linked list. The head pointer allows you to add new nodes to the beginning of the list and traverse the entire list starting from the beginning. The head pointer is kept track of by the program in order to add, delete, and manipulate nodes in a linked list.

A tail pointer is a pointer that points to the last node in a linked list. It can be utilized to add nodes to the end of the linked list or to speed up linked list traversal by storing a reference to the tail node. The tail pointer is kept track of by the program in order to add, delete, and manipulate nodes in a linked list.

You can learn more about the linked list at: brainly.com/question/29360466

#SPJ11

The cost of a link in real life can vary depending on a variety of factors.

In the abstraction of a network, routers are represented as vertices, and links are represented as edges. The cost of a link in real life may depend on various factors such as the type of network, the distance between the routers, the bandwidth requirements, and the quality of the link.The cost of a link in real life is typically determined by the distance between the routers, the bandwidth requirements, and the quality of the link. For instance, if the distance between two routers is far, the cost of the link will be higher due to the extra equipment and maintenance that will be required to maintain the link. On the other hand, if the bandwidth requirements are high, the cost of the link may also be higher since more resources will be required to maintain the link. In addition, the quality of the link can also affect the cost. If the link is unreliable or prone to errors, the cost of maintaining the link will be higher since more resources will be required to ensure that the link is always available and reliable.

Learn more about routers here:

https://brainly.com/question/30368671

#SPJ11

When the output port's buffers are full and fresh packets are arriving, packet loss might happen, resulting in the switch dropping packets. Although increasing switch fabric speed might lessen the chance of packet loss, congestion can still happen.

When packets arrive at a pace that exceeds the port's ability to send them out, packet loss occurs at the output ports, which is a typical issue in network switches. As a result, packets are missed or lost, which reduces network performance and causes data loss. By boosting the switch's capacity and enabling it to process more packets more quickly, improving switch fabric speed can help reduce packet loss. Yet, despite having a quicker switch fabric, packet loss might still happen because of network congestion or other reasons. Other tactics, such flow management, congestion control, and quality of service (QoS), must also be used to prevent packet loss.

learn more about output ports here:

https://brainly.com/question/29606972

#SPJ4

A large corporation that needs a high-speed network to test a product that will backup and restore terabytes of data should use a high-speed Local Area Network (LAN) or a Wide Area Network (WAN) with high bandwidth and low latency. These networks will allow for faster data transfer and efficient backup and restoration of large amounts of data.

A large corporation needs a high-speed network to test a product that will backup and restore terabytes of data. The type of network they should use is a Storage Area Network (SAN).

What is a Storage Area Network (SAN)?

A Storage Area Network (SAN) is a high-speed network of storage devices that provides block-level storage access to applications and servers. SANs are typically used to improve application availability, simplify storage management, and improve resource utilization.SANs provide access to consolidated block-level storage. They are typically composed of hosts, switches, storage elements, and storage devices that are interconnected using a variety of topologies, protocols, and technologies to form a holistic storage infrastructure that is highly available, scalable, and resilient.

The primary purpose of a SAN is to provide access to shared storage devices such as disk arrays, tape libraries, and other storage resources.

A SAN provides block-level storage access, which means that a server can access a storage device using a unique identifier (known as a LUN) rather than a file name, path, or drive letter. SANs are ideal for data backup and disaster recovery scenarios that require the fast transfer of large amounts of data between devices.
Learn more about LAN

https://brainly.com/question/19424964

#SPJ11

Mobile applications tend to employ the "stack" model or structure for managing navigation through an application.

When it comes to managing navigation through an application, mobile applications tend to employ the underlying model or structure of a stack. Therefore, the correct option is stack.What is the stack?In computer science, a stack is a data structure that follows the Last In, First Out (LIFO) principle. Elements are stored in the stack and removed in reverse order. The main feature of a stack is that it has a single entry and exit point, which is the top. It means that new elements may be pushed on the top of the stack, while existing elements may be popped out from the top.Mobile applications employ the underlying model or structure of a stack to manage navigation through an application because of the following reasons:The back button on a mobile device is used to move back to the previous view, and it maintains a history of all views. So, the previous views are stored in the stack as well.It is simple and fast to implement.Stores the view state automatically as the user navigates the views, making it easy to go back to previous views.Implements the LIFO principle that makes the functionality of the back button intuitive.The model or structure of the stack makes it easier for the mobile applications to manage navigation through the application.

Learn more about mobile applications here: brainly.com/question/28425483

#SPJ11