The reaction rate can be affected by the state of the reactants, the frequency of collisions between particles, and the average kinetic energy of the particles in the reactant mixture. Option B is correct.
The state of the reactants can affect the reaction rate. For example, a solid reactant will typically react more slowly than a liquid or gaseous reactant because the molecules in a solid are typically held together more tightly and have less opportunity to come into contact with one another.
The more often the reactant molecules collide with each other, the higher the chance of a successful reaction. Therefore, increasing the frequency of collisions between particles can increase the reaction rate. This can be achieved by increasing the concentration or pressure of the reactants or by increasing the temperature of the system.
The average kinetic energy of the particles in the reactant mixture is directly proportional to the temperature of the system. As the temperature increases, the kinetic energy of the particles increases, and the particles move faster, leading to a higher chance of successful collisions and an increased reaction rate. Option B is correct.
The complete question is
Which factors can affect reaction rate?
I. The state of the reactants
II. The frequency of the collisions between particles
III. The average kinetic energy of the particles
Options:
A. I and II only
B. I, II and III
C. II and III only
D. I and III only
To know more about the Kinetic energy, here
https://brainly.com/question/23823991
#SPJ4
explain how a chemical catalyst helps change the rate of a chemical reaction and give two examples of actual chemical catalysis.
Catalyst helps in changing the rate of a chemical reaction by making the reaction more exothermic, which allows it to take place more quickly.
In chemistry, a catalyst is any substance that speeds up a reaction without consuming itself. Many crucial biochemical reactions are catalysed by enzymes, which are substances that occur naturally.
The majority of solid catalysts are made of metals, or the oxides, sulphides, and halides of metals, as well as of the semimetallic elements silicon, aluminium, and boron. Solid catalysts are frequently dispersed in materials known as catalyst supports, while gaseous and liquid catalysts are typically used in their pure form or in combination with appropriate carriers or solvents.
Visit here to learn more about the catalyst: https://brainly.com/question/24430084
#SPJ4
will the voltage increase or decrease if the pb2 and cu have initial concentrations of 3.0 m and 0.5 m, respectively? in
If the initial concentrations of Pb2+ and Cu2+ are 3.0 M and 0.5 M, respectively, the voltage will decrease.
However,let's consider the most common type of reaction, which is a redox reaction.A redox reaction occurs when electrons are transferred between reactants. Electrons are gained by the oxidizing agent, whereas electrons are lost by the reducing agent. A galvanic cell uses a redox reaction to create electrical energy through the transfer of electrons from a reducing agent to an oxidizing agent.As a result, the direction of the electron flow establishes the voltage of the galvanic cell. So, the voltage is directly proportional to the strength of the reducing agent and inversely proportional to the strength of the oxidizing agent. As a result, the greater the difference between the two half-reactions' standard electrode potentials, the greater the voltage.
The Nernst equation is used to calculate the voltage of a galvanic cell. The equation is as follows: E = E° - (RT/nF) ln(Q)Where E is the voltage of the cell,E° is the standard voltage of the cell,R is the universal gas constant,T is the temperature in Kelvin,n is the number of moles of electrons transferred,F is Faraday's constant,Q is the reaction quotient.
For a redox reaction, the cell voltage may be calculated using the following formula: E°cell = E°red,cathode - E°red,anode = E°red,oxidized - E°red,reducedIn the absence of reaction specifics, it is impossible to determine whether the voltage will increase or decrease. The initial concentrations of Pb2+ and Cu2+ are irrelevant because the reaction's enthalpy, entropy, and activation energy are critical in determining the voltage of a galvanic cell.
For more such questions on Voltage
https://brainly.com/question/15394851
#SPJ11
A gas sample has a temperature of 23 ∘C with an unknown volume. The same gas has a volume of 440. mL when the temperature is 91 ∘C , with no change in the pressure or amount of gas.
a city council is debating between two potential water purification systems: reverse osmosis and ion exchange. cost is the primary criteria for the choice. which decision is the most likely result of this debate?(1 point)
It is likely that they would choose the ion exchange system as the most cost-effective option for water purification, provided it meets their specific water quality requirements.
Based on the student question, it appears that the city council is considering two water purification systems, reverse osmosis and ion exchange, with cost being the primary criterion for their decision.
In this scenario, the most likely result of the debate would be the selection of the water purification system with the lowest overall cost, taking into account both initial investment and ongoing operational expenses. To determine this, the city council would need to conduct a thorough cost analysis of each system.
Reverse osmosis is a process that uses pressure to force water through a semi-permeable membrane, removing contaminants and impurities. It is an effective method for purifying water, but the process can be energy-intensive and may require significant infrastructure investments, such as high-pressure pumps and specialized membranes. Additionally, ongoing costs can be high due to membrane replacement and energy usage.
for more such questions on water quality :
https://brainly.com/question/23717398
#SPJ11
calculate the change of energy for an electron within a hydrogen atom that undergoes a transition from n
The change in energy for an electron within a hydrogen atom that undergoes a transition from an initial energy level with principal quantum number n₁ to a final energy level with principal quantum number n₂ is [tex]2.179872 * 10^{-18} J[/tex].
The change in energy for an electron within a hydrogen atom that undergoes a transition from an initial energy level with principal quantum number n₁ to a final energy level with principal quantum number n₂ is given by the formula:
[tex]\Delta E = -Rhc[(\frac{1}{n_2^2}) - (\frac{1}{n_1^2})][/tex]
Where ΔE is the change in energy, R is the Rydberg constant [tex](1.0973731568508 * 10^7 m^{-1})[/tex], h is the Planck constant [tex](6.62607015 * 10^{-34} J*s)[/tex], and c is the speed of light [tex](2.99792458 * 10^8 m/s)[/tex].
Plugging in the values for n₁ and n₂, we can calculate the change in energy:
[tex]\Delta E = -Rhc[\frac{1}{4} - \frac{1}{9} ][/tex]
[tex]\Delta E = -Rhc[(-\frac{5}{36} )][/tex]
[tex]\Delta E = (\frac{5}{36} )Rhc[/tex]
[tex]\Delta E = (\frac{5}{36})*(1.0973731568508 * 10^7 )*(6.62607015 * 10^{-34})*(2.99792458 * 10^8)[/tex]
[tex]\Delta E = 2.179872 * 10^{-18}[/tex] J
learn more about hydrogen atom here
brainly.com/question/13089956
#SPJ4
if the flask volume is 4.50 l, and the air is at standard temperature and pressure, how many gaseous molecules does the flask contain?
The flask contains approximately 1.07 x 10^23 gaseous molecules at STP.
To calculate the number of gaseous molecules in the flask, we need to use the ideal gas law, which relates the number of molecules of a gas to its pressure, volume, and temperature. The ideal gas law is expressed as:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the absolute temperature.
At standard temperature and pressure (STP), the pressure is 1 atm and the temperature is 273.15 K. The gas constant R is 0.08206 L atm/mol K.
So, we can calculate the number of moles of gas in the flask as:
n = PV/RT = (1 atm)(4.50 L)/(0.08206 L atm/mol K)(273.15 K) = 0.178 mol
The number of molecules in the flask can then be calculated by multiplying the number of moles by Avogadro's number, which is approximately 6.022 x 10^23 molecules/mol:
Number of molecules = n x Avogadro's number = 0.178 mol x 6.022 x 10^23 molecules/mol = 1.07 x 10^23 molecules.
To learn more about temperature visit;
https://brainly.com/question/11406067
#SPJ4
the initial boiling point should be a little less than 100 c, but the final bp should be 100 c. why should the bp rise as the distillation progresses
Answer:
A liquid's boiling point (BP) is the temperature at which it transitions from a liquid to a gas phase. The BP of the liquid being distilled changes as the process continues during distillation.
A liquid mixture's initial BP should be lower than its final BP because the initial BP reflects the temperature at which the mixture's most volatile components evaporate and the final BP indicates the temperature at which the mixture's least volatile components vaporize.
The concentration of the more volatile components in the liquid mixture reduces as the distillation advances, which causes the BP to rise. This implies that the vapor generated has fewer volatile components and more of the less volatile components. Because the boiling points of the less volatile components are higher, the temperature of the vapor in the distillation apparatus must be raised to guarantee that these components also evaporate and are collected.
Explanation:
Examining the vapor-liquid equilibrium curve for the combination being distilled can help explain why the BP grows as the distillation advances. The connection between temperature and the composition of the vapor and liquid phases in equilibrium at a particular pressure is depicted by this curve.
The vapor generated at the start of the distillation has a high concentration of the more volatile components. As the distillation process advances, the concentration of these components in the liquid diminishes, causing the vapor's composition to shift towards the less volatile components.
The temperature at which the vapor is in equilibrium with the liquid changes as its composition changes. To evaporate the less volatile components with higher boiling points, the temperature must be raised. This implies that as the distillation advances, the BP of the mixture will rise, with the final BP denoting the temperature at which all of the components in the mixture have been vaporized and collected.
Know more about
https://brainly.com/question/24101551
As the distillation progresses, the boiling point (BP) should rise. The BP of a substance is the temperature at which its vapor pressure is equal to the atmospheric pressure.
When the distillation begins, the temperature at which the liquid begins to boil is known as the initial boiling point (IBP).The IBP for a mixture containing several liquids is typically lower than 100°C because the vapor pressure is generated from the liquid with the lowest boiling point. As the temperature rises, the vapor pressure of the other liquids in the mixture starts to rise as well, causing them to boil off. The temperature at which the last component boils off is known as the final boiling point (FBP). The FBP should be about 100°C since the atmospheric pressure is typically 1 atm or 760 mmHg. Therefore, the BP of a substance rises as distillation progresses.
To know more about boiling point click here:
brainly.com/question/14771622
#SPJ11
The ph curve begins with a ph of
A. 0-3
B. 4-7
C. 7-10
D. 11-14
Answer:
I belive the answers is C but I'm not certain
Explanation:
None
the hoffman product is: select answer from the options below the elimination product with the least substitution. the elimination product with the highest substitution. never the major product of an elimination. the elimination product with a bridgehead double bond.
The Hoffmann product is the elimination product with the least substitution. Option A is correct.
It is obtained when the elimination reaction occurs via a mechanism that involves a cyclic transition state, leading to an anti-periplanar geometry of the leaving groups. This results in the formation of the least substituted alkene as the major product.
The Hoffmann product is often observed when the leaving group is bulky and cannot adopt a conformation that favors the formation of the more substituted alkene.
An elimination product is a product formed by the elimination of a molecule, often a leaving group, from a larger molecule. Elimination reactions are common in organic chemistry and often involve the removal of a proton and a leaving group from an organic molecule to form a double bond between adjacent carbon atoms.
Hence, A. is the correct option.
To know more about elimination reaction here
https://brainly.com/question/8739887
#SPJ4
--The given question is incomplete, the complete question is
"The Hoffman product is: select answer from the options below A) the elimination product with the least substitution. B) the elimination product with the highest substitution. C) never the major product of an elimination. D) the elimination product with a bridgehead double bond."--
H2-2 magnetization according to molecular orbital theory
Answer:
The two such half field atomic orbitals compbine to from a molecular orbital which contains both these electrons. But helium (Z=2) has already a filled orbital (1s2). Therefore, the atomic orbitals of the helium atoms donot combine. Thus, a molecule of H2 exists while that of He2 does not.
What is the volume at STP of 1.25 mol of He?
a.
0.055 L
b. 28.0 L
C. 56 L
d. 7.52 x 1023 L
Answer: 28.0 L
Explanation:
At standard temperature and pressure, 1 mole of any gas is always 22.4 L. So, all you have to do for this problem is multiply 22.4 L by the amount of moles, 1.25.
[tex]22.4*1.25=28.0 L[/tex]
2. is energy conserved in this experiment? what are the major sources of error in the experiment?
Yes, energy is conserved in this experiment. The law of conservation of energy states that energy cannot be created or destroyed; it can only be transferred or transformed from one form to another.
What is energy?Energy is the ability to do work or produce heat. It can be classified into two categories: potential energy and kinetic energy.
Potential energy is stored energy that can be released later, while kinetic energy is the energy of motion.
What are the major sources of error in the experiment?The sources of error in the experiment include:
Human error: This refers to mistakes made by the experimenter during the experiment. This can include incorrect measurements, misinterpretation of data, or forgetting to record data.
Systematic error: This refers to errors that arise from a problem with the apparatus or instrument used in the experiment. This type of error is consistent and can be corrected by recalibrating the equipment.
Random error: This is an error that occurs due to the unpredictability of the experiment, and it cannot be controlled. This error is not consistent, and it is usually caused by environmental factors, such as temperature fluctuations or vibration.
To know more about energy refer to-
brainly.com/question/1932868#
#SPJ11
someone help with simple science pls
Answer:
What is the question?
Explanation:
which ph value corresponds to the highest concentration of hydronium? select the correct answer below: 1.2 3.7 6.4 8.9
The correct option is A, the pH value of 1.2 would correspond to the highest concentration of hydronium ions.
pH is a measure of the acidity or basicity (alkalinity) of a solution. It is defined as the negative logarithm of the hydrogen ion concentration in a solution. The pH scale ranges from 0 to 14, with 7 being neutral. Solutions with a pH below 7 are considered acidic, while solutions with a pH above 7 are considered basic or alkaline.
The pH value of a solution affects the chemical and biological processes that occur within it. For example, enzymes, which are proteins that catalyze chemical reactions in living organisms, have an optimal pH range in which they function best. Changes in pH can also affect the solubility and stability of drugs and other chemicals. Measuring pH is important in many fields, including chemistry, biology, medicine, and environmental science. Common methods for measuring pH include pH meters and litmus paper
To learn more about pH value visit here:
brainly.com/question/28580519
#SPJ4
which of the following statements are true/false about lab exercise 5? false unreacted maleic anhydride can be separated from the adduct by vacuum filtration true moisture-free conditions must be kept at all times during the reaction false the amount of diene in the eucalyptus oil will be determined using gas chromatogram analysis true the diene will be identified by its melting point
Gas chromatography analysis will be used to determine the amount of diene in the eucalyptus oil, and moisture-free conditions must be maintained throughout the entire reaction. Option A and B are thus correct.
In this method, a sample is fed into the gas chromatograph after being combined with a solvent. The sample is transformed from a liquid to a gas by vaporisation. The sample is carried through the column by an inert carrier gas that is also flowing through it.
Here are the correct statements about lab exercise 5:
False: Unreacted maleic anhydride can be separated from the adduct by vacuum filtration.
True: It is necessary to maintain dry conditions during the process.
True: Gas chromatogram analysis will be used to assess how much diene is present in the eucalyptus oil.
False: The melting point of the diene will be used to identify it.
To know more about gas chromatography, refer:
https://brainly.com/question/18763279
#SPJ4
Correct question:
Which of the following statements are true/false about lab exercise 5?
A. the amount of diene in the eucalyptus oil will be determined using gas chromatogram analysis
B. unreacted maleic anhydride can be separated from the adduct by vacuum filtration
C. The diene will be identified by its melting point.
D. moisture-free conditions must be kept at all times during the reaction
what reagent is needed to convert ch3ch2cooch2ch2ch3 to ch3ch2cho?
a. DIBAL-H
b. NaBH4
c. LiAlH4
d. NADH
The correct reagent needed to convert [tex]CH3CH2COOCH2CH2CH3 to CH3CH2CHO[/tex] is c. LiAlH4.
What is a reagent?Reagent refers to the substance or compounds which help in detecting or measuring some other substances by taking part in chemical reactions.
A reagent is often used to detect or determine the presence of a substance, to cause a reaction, or to serve as a standard for comparison.
LiAlH4 is a strong reducing agent that is commonly used for chemical reductions. Lithium aluminum hydride (LiAlH4) is a reducing agent used in organic chemistry.
It is mainly used for the reduction of esters, carboxylic acids, and amides to alcohols, aldehydes, and amines, respectively. Therefore, LiAlH4 is required to convert [tex]CH3CH2COOCH2CH2CH3 to CH3CH2CHO[/tex].
What is the process of the reaction?The reaction is as follows:[tex]CH3CH2COOCH2CH2CH3 + 4[H] → CH3CH2CHO + CH3CH2CH2OH + HCOOCH2CH2CH3[/tex]
Thus, the correct answer is option c.
To know more about reagent refer to-
brainly.com/question/31228572#
#SPJ11
you have 20 gr of phosphorous that deacys 5% per day. how long will it take for half the amound to decay?
The decay of phosphorus can be modelled using exponential decay, which is given by the equation:
N(t) = N0 × [tex]e^{-kt}[/tex]
where N(t) represents the quantity of phosphorus still present at time t, N0 represents the initial quantity of phosphorus (20 g in this example), k represents the decay constant, and e represents the base of the natural logarithm (approximately equal to 2.718).
Given that the daily percentage decay is 5%, the decay constant k can be determined as follows:
k = ln(1 - 0.05)/(-1 day) ≈ 0.0513 day⁻¹
To find the time it takes for half the amount of phosphorus to decay, we can set N(t) equal to N0/2 and solve for t:
N(t) = N0/2 = N0 × [tex]e^{-kt}[/tex]
[tex]e^{-kt}[/tex] = 1/2
Taking the natural logarithm of both sides, we get:
-ln(2) = -kt
Solving for t, we get:
t = ln(2)/k ≈ 13.5 days
Therefore, it will take about 13.5 days for half of the initial amount of phosphorus (10 g) to decay.
Learn more about Phosphorous here: brainly.com/question/17959554
#SPJ4
What results in radioactivity?
Atomic nuclei's unstable arrangement leads to radioactivity. Atoms with unstable nuclei can spontaneously go through a process known as radioactive decay where they release electromagnetic radiation and/or particles to attain a more stable configuration.
Radiation is the general term used to describe the particles and energy released during radioactive disintegration.
Alpha, beta, and gamma decay are the three kinds of radioactive decay. The center releases an alpha particle during alpha decay, which is made up of two protons and two neutrons.
The atomic number is decreased by two, and the mass number is decreased by four. The nucleus releases a beta particle, either an electron or a positron, during beta decay. The amount of protons and/or neutrons in the nucleus is altered as a result.
Radioactivity can be created intentionally, as in the case of nuclear reactions in nuclear power plants and nuclear weapons, or it can occur naturally, as in the case of radioactive isotopes like uranium and thorium found in the earth's crust.
Depending on the radiation type, dose, and length of exposure, the effects of radiation exposure can vary from no harm to severe health effects like radiation sickness, cancer, and genetic damage.
learn more about radioactivity here
https://brainly.com/question/1236735
#SPJ1
●
greenhouse effect simulation
Part A
Record the gas concentrations associated with each of these time periods.
(Note: ppm = parts per million)
B IUX² X₂ 10pt
Today
1750
Ice Age
Period
<
AV AEEEE
H₂0 % relative humidity
Space used (Includes formatting): 649 / 15000
CO₂ (ppm)
网 田
CH4 (ppm)
N₂0
Carbon dioxide concentrations have grown significantly since the beginning of the industrial period, going from an annual average of 280 ppm in the late 1700s to 414 ppm in 2021 – a 48 percent increase.
What are greenhouse gas concentrations?The greenhouse gas equivalent concentration has been developed in order to total their impacts on the atmosphere. This is the CO2 concentration that would produce the same amount of radiative forcing as a combination of CO2 and other greenhouse gases over a 100-year time horizon.
CO2 accounts for over 76% of global greenhouse gas emissions. Methane, largely from agriculture, accounts for 16% of worldwide greenhouse gas emissions, while nitrous oxide, primarily from industry and agriculture, accounts for 6%.
learn more about greenhouse gas
https://brainly.com/question/12684997
#SPJ1
Materials can be recycled because of
A the law of conservation of momentum
B
the law of conservation of energy
C the law of conservation of matter
D
the law of conservation of natural resources
Answer:
C) the law of conservation of matter
Explanation:
The law of conservation of matter, also known as the law of conservation of mass, states that matter cannot be created or destroyed in a chemical reaction. This means that the total mass of the reactants in a chemical reaction must be equal to the total mass of the products.
In the context of recycling, this law means that the materials used to make a product can be reused or transformed into new products, rather than being discarded as waste. When materials are recycled, they are not destroyed or eliminated, but rather they are converted into new forms or combined with other materials to create something new. By recycling materials, we are able to reduce the amount of waste that goes into landfills or is incinerated, and we can also conserve natural resources by using fewer raw materials to make new products. Overall, the law of conservation of matter provides a scientific basis for the practice of recycling, and highlights the importance of sustainable resource use and waste reduction.
as a lead-acid battery is discharged (as the overall reaction progresses to form more products), what happens to the ph of the solution in the battery and what happens to the voltage of the cell?
As a lead-acid battery is discharged, the pH of the solution in the battery decreases.Additionally, the voltage of the cell decreases as the battery discharges.
As a lead-acid battery is discharged, the pH of the solution in the battery decreases. This is because the overall reaction of the battery results in the production of hydrogen ions (H+) at the negative electrode and the consumption of hydrogen ions at the positive electrode. The accumulation of H+ ions at the negative electrode causes the pH to decrease.
Additionally, the voltage of the cell decreases as the battery discharges. This is because the availability of reactants decreases as the reaction progresses, resulting in a decrease in the driving force for the reaction. The voltage of a lead-acid battery is directly proportional to the concentration of sulfuric acid (H2SO4) in the electrolyte. As the battery discharges, the concentration of sulfuric acid decreases, leading to a decrease in voltage.
To know more about lead acid battery go through:-
https://brainly.com/question/29643320
#SPJ4
the electrolysis of bio produces pure bismuth. how long would it take to produce 30.0 g of bi by the electrolysis of a bio solution using a current of 25.0 a?
The electrolysis of a Bi(NO3)3 solution produces Bi at the cathode according to the following equation:
Bi3+(aq) + 3e- → Bi(s)
The amount of Bi produced at the cathode is proportional to the amount of charge passed through the cell, which is given by the equation:
Q = I × t
where Q is the charge in coulombs (C), I is the current in amperes (A), and t is the time in seconds (s).
To determine the time required to produce 30.0 g of Bi using a current of 25.0 A, we need to calculate the amount of charge required to produce this amount of Bi. The molar mass of Bi is 208.98 g/mol, so the number of moles of Bi required is:
n = m/M = 30.0 g/208.98 g/mol = 0.1436 mol
According to the balanced chemical equation, 3 moles of electrons are required to produce 1 mole of Bi. Therefore, the total number of moles of electrons required is:
n(e-) = 3 × n = 0.4308 mol
The total charge required is equal to the number of moles of electrons multiplied by the charge on an electron:
Q = n(e-) × F = 0.4308 mol × 96,485 C/mol = 41,602 C
Finally, we can use the equation Q = I × t to calculate the time required to produce the necessary charge:
t = Q/I = 41,602 C/25.0 A = 1,664.1 s
Therefore, it would take 1,664.1 seconds, or about 28 minutes, to produce 30.0 g of Bi using a current of 25.0 A.
To know more about electrolysis , visit the link given below:
https://brainly.com/question/12054569
#SPJ4
23 Which statement best describes how a model can be used to illustrate the chemical reaction at station 1
A model can be used to visually represent the chemical reaction occurring at station 1, which can help to understand the reaction mechanism and the role of each reactant in the reaction.
What is chemical reaction?A chemical reaction is a process in which one or more substances (known as reactants) are transformed into new substances (known as products) through the breaking and formation of chemical bonds.
A model can be used to represent a chemical reaction by showing the reactants and products involved and the changes that occur during the reaction. Specifically, for station 1, a model can illustrate the chemical reaction by depicting the reactants (such as hydrogen and oxygen) and the products (such as water) involved in the process.
One way to create a model of this chemical reaction is through a chemical equation, which uses chemical formulas to represent the reactants and products and shows the chemical changes that occur during the reaction. The chemical equation for the reaction at station 1 is:
2 H2 + O2 → 2 H2O
This equation shows that two molecules of hydrogen (H2) react with one molecule of oxygen (O2) to form two molecules of water (H2O). The coefficients in front of each molecule indicate the number of molecules of each substance involved in the reaction.
To know more about chemical reaction:
https://brainly.com/question/29039149
#SPJ1
Complete question:
Can you explain how a model can be used to illustrate the chemical reaction at station 1?
which of the following elements are in the noble gas column of the periodic table of the elements? group of answer choices nitrogen lithium carbon krypton helium hydrogen
The following elements are in the noble gas column of the periodic table of elements; helium, neon, argon, krypton, xenon, and radon.
Noble gases are a group of non-reactive chemical elements on the periodic table. Noble gases are also known as inert gases since they are inert, monatomic gases under normal conditions in their standard states. Noble gases have a completely filled outermost shell, which is why they are inert, as no other electrons are required to complete them
.The following elements are in the noble gas column of the periodic table of elements:Helium,Neon,Argon,Krypton,Xenon&Radon. The elements in the noble gas column have their valence electron configuration completed; hence, they don't require or donate electrons from other atoms to complete their outer shell. Therefore, these elements do not have the ability to bond with other elements, making them inert.
For more such questions on Noble gases
https://brainly.com/question/17748177
#SPJ11
which of the following is a buffer system? group of answer choices hcl(aq) and naoh(aq) h2o(l) and hcl(aq) nacl(aq) and naoh(aq) nacl(aq) and nano3(aq) h2co3(aq) and khco3(aq)
The combination [tex]H_2CO_3(aq)[/tex] and [tex]KHCO_3(aq)[/tex] is a buffer system.
A buffer system is a solution that can resist changes in pH when small amounts of an acid or a base are added to it. A buffer is usually composed of a weak acid and its conjugate base or a weak base and its conjugate acid. A buffer system works by absorbing any added acid or base with its weak acid or weak base components.
[tex]H_2CO_3(aq)[/tex] and [tex]KHCO_3(aq)[/tex] is a buffer system because [tex]H2CO_3[/tex] is a weak acid, and [tex]KHCO_3[/tex] is its conjugate base.
Therefore, this combination of [tex]H_2CO_3(aq)[/tex] and [tex]KHCO_3(aq)[/tex] is capable of acting as a buffer system.
For more such questions on buffer system, click on:
https://brainly.com/question/22821585
#SPJ11
g for the redox reaction shown below, cu(s) 2ag (aq) cu2 (aq) 2ag(s) copper is undergoing oxidation group of answer choices true false
True, In the given redox reaction, Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s), copper (Cu) is undergoing oxidation.
1. Identify the oxidation states of each element in the reactants and products:
- Cu(s): 0 (elemental state)
- Ag⁺(aq): +1
- Cu²⁺(aq): +2
- Ag(s): 0 (elemental state)
2. Determine the change in oxidation states for each element involved in the reaction:
- Cu: from 0 to +2 (increase in oxidation state)
- Ag: from +1 to 0 (decrease in oxidation state)
3. Analyze the changes in oxidation states:
- An increase in oxidation state indicates that the element has lost electrons and has undergone oxidation. In this case, copper (Cu) has an increase in its oxidation state from 0 to +2, which means it has lost 2 electrons (2e⁻) during the reaction.
- A decrease in oxidation state indicates that the element has gained electrons and has undergone reduction. In this case, silver (Ag) has a decrease in its oxidation state from +1 to 0, which means it has gained 1 electron (1e⁻) during the reaction.
4. Confirm the redox process:
- Oxidation: Cu(s) → Cu²⁺(aq) + 2e⁻
- Reduction: 2Ag⁺(aq) + 2e⁻ → 2Ag(s)
for more questions on oxidation
https://brainly.com/question/4222605
#SPJ11
given a choice of atoms, which atom should you put in the center of a lewis structure? question 10 options: the atom that is nearer to the right and lowest down on the periodic table. the atom that is nearer to the right and highest up on the periodic table. the atom that is nearer to the left and highest up on the periodic table. the atom that is nearer to the left and lowest down on the periodic table
When given a choice of atoms, the atom that should be put in the center of a Lewis structure is the atom that is nearer to the right and highest up on the periodic table.
A Lewis structure is a model that shows how electrons are arranged in an atom, molecule, or ion. Lewis structures depict bonding in molecules, including covalent bonds, and the arrangement of electrons. The Lewis structure of a molecule or polyatomic ion is a two-dimensional representation that uses lines to depict covalent bonds and dots to depict lone electron pairs.
Based on electronegativity, the atom that should be placed in the center of a Lewis structure is the atom with the highest electronegativity. Electronegativity is the measure of the tendency of an atom to draw electrons towards itself when in a chemical bond. The atom that is closer to the top right corner of the periodic table, typically non-metals, has higher electronegativity than the ones in the lower left corner, typically metals.
The other options - the atom that is nearer to the right and lowest down on the periodic table, the atom that is nearer to the left and highest up on the periodic table, the atom that is nearer to the left and lowest down on the periodic table - are incorrect as they do not follow the rules of electronegativity.
More on atoms: https://brainly.com/question/31265348
#SPJ11
Question 9 of 25
Which is the best reason a writer would use an unreliable narrator?
A. Narrators are more believable if they are unreliable.
O B. Using an unreliable narrator can create excitement and tension.
C. Unreliable narrators may cause the reader to become frustrated.
D. Storytelling is less difficult with an unreliable narrator.
The best reason a writer would use an unreliable narrator is B. Using an unreliable narrator can create excitement and tension.
What is the reason for using unreliable narrator ?An unreliable narrator is a literary technique where the narrator's credibility is compromised due to their lack of honesty, mental state, or understanding of events. Using an unreliable narrator can create suspense and tension in a story since the reader is unsure of what is true or false.
In contrast, using a reliable narrator may not create as much tension or intrigue since the reader is more likely to trust the narrator's account of events. However, it is important to note that using an unreliable narrator can also lead to frustration for the reader if the author does not handle the technique effectively.
Learn more about narrator at:
https://brainly.com/question/860877
#SPJ1
A cube of sides 2cm has a mass of 100g. Determine its density
The density of the cube with sides of 2cm and a mass of 100g is 12.5 g/cm³.
How to calculate the density of the cube?
The density of the object is defined as its mass-per-unit volume. In this case, we know the mass of the cube and we can calculate its volume as the cube of the length of its sides.
The volume of the cube is:
V = (2 cm)³ = 8 cm³
Next, The density can be calculated using the following formula:
Density = mass / volume
Density = 100 g / 8 cm³ = 12.5 g/cm³
Therefore, the density of the cube is 12.5 g/cm³.
To learn more about density, visit: https://brainly.com/question/28348989
#SPJ1
a mixture of oxygen and nitrogen gases, at a total pressure of 783 mm hg, contains 3.50 grams of oxygen and 3.48 grams of nitrogen. what is the partial pressure of each gas in the mixture?
The partial pressure of each gas in the mixture is 294 mm and 455 mm respectively.
[tex]P_{total}[/tex] = 749 mm[tex]H_{g}[/tex]
The Partial pressure of a gas is equals to the mole fraction of that gas x total pressure according to the Raoult's law.
moles Xenon = 16.8 g x 1 mole Xenon / 131 g = 0.128 moles Xenon
moles Nitrogen = 5.54 g N2 x 1 mole N2 / 28 g = 0.198 moles N2
Total moles of gas = 0.128 moles x 0.198 moles = 0.326 moles
Mole fraction of the Xenon = 0.128/0.326 = 0.393
Mole fraction Nitrogen = 0.198/0.326 = 0.607
Partial pressure of Xenon = 0.393 x 749 mm Hg = 294 mm [tex]H_{g}[/tex]
Partial pressure of Nitrogen = 0.607 x 749 mm Hg = 455 mm [tex]H_{g}[/tex]
To learn more about Partial pressure
https://brainly.com/question/19813237
#SPJ4
The correct question is,
A mixture of xenon and nitrogen gases, at a total pressure of 749 mm Hg, contains 16.8 grams of xenon and 5.54 grams of nitrogen. What is the partial pressure of each gas in the mixture?