The solution to the inequality x^4 - x^3 - 16x^2 - 20x ≤ 0 is {-2 U [0,5] }
To solve the inequality x^4 - x^3 - 16x^2 - 20x ≤ 0 algebraically, we can follow these steps:
1. Factor the expression,
x^4 - x^3 - 16x^2 - 20x ≤ 0
x(x+2)^2(x-5)≤ 0
2. Identify the critical points by setting the expression equal to zero and solving for x. To find the critical points, we need to solve the equation x(x+2)^2(x-5)=0.
The critical points are -2, 0, 5.
3. Use the critical points to create test intervals.
x=-2 or 0≤ x≤ 5
The solution to the inequality x^4 - x^3 - 16x^2 - 20x ≤ 0 is {-2 U [0,5] }
Learn more about inequality :
https://brainly.com/question/25275758
#SPJ11
Numerical methods can be useful in solving different problems. Using numerical differentiation, how many acceleration data points can be determined if given 43 position data points of a moving object given by (x,t) where x is x-coordinate and t is time?
However, the number of acceleration data points that can be determined from the given position data remains 41 in this case.
In numerical differentiation, the acceleration can be approximated by taking the second derivative of the position data with respect to time.
Given 43 position data points (x, t), we can determine the acceleration at each of these points. However, it's important to note that the accuracy and reliability of the numerical differentiation method depend on the quality and spacing of the data points.
To compute the acceleration, we need at least three position data points. Using a technique like finite differences, we can approximate the second derivative at each point using three neighboring position data points. Therefore, we can determine the acceleration for a total of 41 data points out of the 43 position data points, excluding the first and last data points.
It's worth mentioning that using higher-order numerical differentiation methods or increasing the number of data points can potentially improve the accuracy of the acceleration estimation.
However, the number of acceleration data points that can be determined from the given position data remains 41 in this case.
To learn more about derivative visit:
brainly.com/question/25324584
#SPJ11
10 points Benzene (CSForal = 0.055 mg/kg/day) has been identified in a drinking water supply with a concentration of 5 mg/L.. Assume that adults drink 2 L of water per day and children drink 1 L of wa
The concentration of benzene in the drinking water supply is 5 mg/L, which exceeds the CSForal value of 0.055 mg/kg/day.
Benzene is a toxic chemical that can contaminate drinking water sources. In this case, the concentration of benzene in the water supply is 5 mg/L. To assess the potential health risks associated with benzene exposure, we compare this concentration to the CSForal value, which represents the chronic oral reference dose for benzene.
The CSForal value for benzene is 0.055 mg/kg/day. This value indicates the maximum daily dose of benzene that an individual can consume orally over a lifetime without significant adverse effects.
To determine the potential health risks, we need to consider the amount of water consumed by different age groups. Adults typically drink around 2 liters of water per day, while children consume approximately 1 liter.
Learn more about concentration
brainly.com/question/30862855
#SPJ11
A T-beam with bf=700 mm,hf=100 mm,bw=200 mm,h=400 mm,cc=40 mm, stirrups =12 mm,cc′=21Mpa, fy=415Mpa is reinforced by 4−32 mm diameter bars for tension only. Calculate the depth of the neutral axis. Calculate the nominal moment capacity
We calculate the depth of the neutral axis is approximately 233.94 mm. The nominal moment capacity is approximately 21.51 kNm.
To calculate the depth of the neutral axis, we can use the Whitney's stress block method. The depth of the neutral axis can be determined by equating the moments of the compressive and tensile forces about the neutral axis.
1. Determine the effective depth (d) of the T-beam:
d = h - cc
d = 400 mm - 40 mm
d = 360 mm
2. Calculate the area of steel reinforcement (As):
As = (4)(π/4)(32 mm)²
As = 804.25 mm²
3. Calculate the compressive force (Ac) in the concrete:
Ac = (bf)(hf) - As
Ac = (700 mm)(100 mm) - 804.25 mm²
Ac = 68955.75 mm²
4. Calculate the tensile force (At) in the steel reinforcement:
At = (4)(π/4)(32 mm)² × fy
At = 804.25 mm² × 415 MPa
At = 334004.75 N
5. Equate the moments of the compressive and tensile forces about the neutral axis:
Ac × 0.85 × (d/2) = At × (d - 0.416 × d)
This equation accounts for the shift of the neutral axis due to the presence of steel reinforcement.
6. Solve the equation to find the depth of the neutral axis (x):
x ≈ 233.94 mm
Therefore, the depth of the neutral axis is approximately 233.94 mm.
To calculate the nominal moment capacity, we can use the formula:
Mn = 0.36 × fy × As × (d - 0.416 × d)
7. Substitute the known values into the formula:
Mn = 0.36 × 415 MPa × 804.25 mm² × (360 mm - 0.416 × 360 mm)
Mn ≈ 21510722.68 Nmm ≈ 21.51 kNm
Therefore, the nominal moment capacity is approximately 21.51 kNm.
In summary, the depth of the neutral axis is approximately 233.94 mm, and the nominal moment capacity is approximately 21.51 kNm.
Learn more about the nominal moment capacity from the given link-
https://brainly.com/question/28059615
#SPJ11
Suppose we have 3 cards identical in form except that both sides of the first card are coloured red, both sides of the second are coloured black, and one side of the third card is coloured red and the other side is coloured black. The three cards are mixed up in a hat, and 1 card is randomly selected and put down on the ground. If the upper side of the chosen card is coloured red, what is the probability that the other side is coloured black. 2. Marrie is getting married tomorrow, at an outdoor ceremony in the desert. In recent years, it has rained only 5 days each year. Unfortunately, the weatherman has predicted rain for tomorrow. When it actually rains, the weatherman correctly forecasts rain 90% of the time. When it doesn't rain, he incorrectly forecasts rain 10% of the time. What is the probability that it will rain on the day of Marie's wedding? Assume that there are no leap years.
1. The probability that the other side of the chosen card is colored black is 1 out of 2, or 1/2.To solve the first problem, let's consider the possible cards that could have been chosen from the hat.
There are two cards with a red side: one is completely red on both sides, and the other has a red side and a black side. The third card is completely black on both sides.Now, we know that the upper side of the chosen card is colored red. So, we can eliminate the completely black card from consideration, as it cannot have a red upper side. We are left with two possible cards: one completely red and the other with a red side and a black side.Out of these two remaining cards, only one has a black side.
2. The probability that it will rain on the day of Marie's wedding is approximately 0.116, or 11.6%.Now let's move on to the second problem. We have two scenarios to consider: it either rains or it doesn't rain on Marie's wedding day.If it does rain, the weatherman correctly forecasts rain 90% of the time. So the probability of the weatherman correctly predicting rain given that it actually rains is 90%.If it doesn't rain, the weatherman incorrectly forecasts rain 10% of the time. So the probability of the weatherman incorrectly predicting rain given that it doesn't rain is 10%.
We also know that it has rained only 5 days each year recently, out of 365 days. This means that the probability of it raining on any given day is 5/365, or approximately 0.014.
To calculate the probability that it will rain on Marie's wedding day, we need to consider both scenarios. We can use Bayes' theorem to calculate it:
P(Rain | Forecast) = (P(Forecast | Rain) * P(Rain)) / (P(Forecast | Rain) * P(Rain) + P(Forecast | No Rain) * P(No Rain))
P(Rain | Forecast) = (0.9 * 0.014) / (0.9 * 0.014 + 0.1 * (1 - 0.014))
After calculating this expression, we find that the probability of it raining on Marie's wedding day is approximately 0.116, or 11.6%.
To know more about probability visit:
https://brainly.com/question/31828911
#SPJ11
Project X has an initial investment cost of $20.0 million. After 10 years it will have a salvage value of $2.0 million. This project will generate annual revenues of $5.5 million per year and will have an annual operating cost of $1.8 million. If the company's rate of return is 8% (e. i-8W), what is the Net Present Value (NPV) of this investment, assuming a 10-year life of the project? A .$19.000 million
B.-$2.444 million C. +$8.756 million
The Net Present Value (NPV) of this investment, assuming a 10-year life of the project is +$6.36 million.
Option C. +$8.756 million is incorrect.
Option A. $19.000 million is incorrect.
Option B. -$2.444 million is correct.
The Net Present Value (NPV) of this investment, assuming a 10-year life of the project is -$2.444 million.
The formula for calculating NPV is:
PV = FV / (1 + r)n
where, PV = Present Value
FV = Future Value
r = rate of return
n = number of years
The formula for calculating the Net Present Value (NPV) is:
NPV = PV of inflows - PV of outflows
where, PV = Present Value
To calculate the Net Present Value of the project:
Initial investment = -$20.0 million
Salvage value = $2.0 million
Annual revenue = $5.5 million
Annual operating cost = $1.8 million
Rate of return = 8% (i.e., 0.08)
The life of the project = 10 years
Inflow for each year (Annual revenue - Annual operating cost)
= $5.5 million - $1.8 million
= $3.7 million
The PV of inflows:
PV of inflows
= [($3.7 / (1 + 0.08)1) + ($3.7 / (1 + 0.08)2) + .........+ ($3.7 / (1 + 0.08)10)]
PV of inflows = [$3.42 + $3.16 + $2.93 + $2.71 + $2.51 + $2.33 + $2.15 + $1.99 + $1.84 + $1.70]
PV of inflows = $25.93 million
The PV of outflows:
The PV of the initial investment = -$20.0 million * (1 / (1 + 0.08)1)
= -$18.52 million
The PV of the salvage value = $2.0 million * (1 / (1 + 0.08)10)
= $1.05 million
The PV of outflows = $18.52 + $1.05 million
PV of outflows = $19.57 million
Now, the Net Present Value (NPV) of the project is:
NPV = PV of inflows - PV of outflows
NPV = $25.93 - $19.57 million
NPV = $6.36 million
Thus, the Net Present Value (NPV) of this investment, assuming a 10-year life of the project is +$6.36 million.
Option C. +$8.756 million is incorrect.
Option A. $19.000 million is incorrect.
Option B. -$2.444 million is correct.
To know more about Net Present Value (NPV) visit:
https://brainly.com/question/32743126
#SPJ11
Briefly describe Water treatments basics and what are the key
parameters the final product must meet?
The treatment process of water involves different steps, including screening, settling, and disinfection.
To achieve the final product, there are various key parameters that the water must meet.
The treatment process of water involves different steps, including screening, settling, and disinfection. Before the treatment process, the water undergoes preliminary treatments to remove large impurities. Here are the primary water treatment steps;
Coagulation and flocculation - This process involves adding chemical substances to water to make impurities stick together. This process helps remove dirt, sediments, and other substances from the water.Sedimentation - Once the impurities have come together, the water is left to settle so that the impurities settle at the bottom of the container.
Filtration - The water passes through filters, which help remove the remaining impurities.Disinfection - The water is disinfected using chemicals such as chlorine to kill any remaining bacteria and viruses
water treatment basics involve the process of cleaning and treating contaminated water to make it safe for use or consumption. The process involves various stages, including coagulation and flocculation, sedimentation, filtration, and disinfection.
Before the treatment process, the water undergoes preliminary treatments to remove large impurities. To achieve the final product, there are various key parameters that the water must meet.
These parameters include water pH, turbidity, color, temperature, and taste. The final water product must be safe, clear, odorless, and colorless. In some instances, the water must be mineral-rich for consumption. In summary, water treatment is an essential process that ensures the availability of clean and safe water for use or consumption.
To know more about Coagulation visit:
brainly.com/question/28175731
#SPJ11
(a) Select all of the correct statements about reaction rates from the choices below.
1.) The lower the rate of a reaction the longer it takes to reach completion.
2.) Concentrations of homogeneous catalysts have no effect on reaction rates.
3.) As a reaction progresses its rate goes down.
4.) A balanced chemical reaction is necessary to relate the rate of disappearance of a reactant to the rate of appearance of a product.
5.) Reaction rates increase with increasing temperature.
6.) Reaction rates are determined by reactant concentrations, temperatures, and reactant stabilities.
7.) Reaction rates increase as concentrations of homogeneous catalysts increase.
The correct statements about reaction rates are:
1.) The lower the rate of a reaction, the longer it takes to reach completion.
4.) A balanced chemical reaction is necessary to relate the rate of disappearance of a reactant to the rate of appearance of a product.
5.) Reaction rates increase with increasing temperature.
6.) Reaction rates are determined by reactant concentrations, temperatures, and reactant stabilities.
Reaction rates are a measure of how quickly a reaction occurs. Let's evaluate each statement to determine which ones are correct.
1.) The lower the rate of a reaction, the longer it takes to reach completion.
This statement is correct. A slower reaction rate means the reaction takes a longer time to complete. For example, if it takes 10 minutes for a reaction with a low rate to reach completion, a reaction with a higher rate might reach completion in just 2 minutes.
3.) As a reaction progresses, its rate goes down.
This statement is generally incorrect. As a reaction progresses, the rate may increase or decrease depending on the specific reaction. For example, some reactions may start with a high rate and gradually decrease as reactants are consumed, while others may start with a low rate and increase as the products build up.
4.) A balanced chemical reaction is necessary to relate the rate of disappearance of a reactant to the rate of appearance of a product.
This statement is correct. A balanced chemical reaction is necessary to determine the stoichiometry and the ratio of reactants consumed to products formed. This information is crucial in relating the rate of disappearance of a reactant to the rate of appearance of a product.
5.) Reaction rates increase with increasing temperature.
This statement is correct. Increasing the temperature generally increases the rate of a reaction. Higher temperatures provide more energy to the reactant particles, leading to more frequent and energetic collisions, which in turn increases the reaction rate.
6.) Reaction rates are determined by reactant concentrations, temperatures, and reactant stabilities.
This statement is correct. Reactant concentrations, temperatures, and reactant stabilities all play a role in determining the rate of a reaction. Higher reactant concentrations, higher temperatures, and more stable reactants generally result in faster reaction rates.
7.) Reaction rates increase as concentrations of homogeneous catalysts increase.
This statement is incorrect. Homogeneous catalysts are substances that are in the same phase as the reactants and do not alter the concentrations of reactants or products. They work by providing an alternative reaction pathway with lower activation energy. Therefore, the concentration of a homogeneous catalyst does not directly affect the reaction rate.
Let us know more about reaction rates :
https://brainly.com/question/28566775.
#SPJ11
47) Identify the major ions present in an aqueous HNO3 solution. A) OH, NO+ B) HN2+, 02- C) H+, NO3- D) OH, NO3- E) H¹, N3-, 02- 48
The major ions present in an aqueous HNO³ solution are H⁺ and NO³⁻. So, the correct answer is C) H⁺, NO³⁻.
H⁺ is the hydrogen ion, which is released when HNO³ (nitric acid) dissociates in water. It is an important player in acid-base reactions.
NO³⁻ is the nitrate ion, which is the conjugate base of HNO³. It remains in the solution after HNO³ dissociates.
Nitric acid (HNO3) is a strong and highly corrosive mineral acid. It is a colorless liquid at room temperature and is commonly used in various industries and laboratory settings. Here are some key points about nitric acid:
Chemical Formula: HNO3
Chemical Structure: It is composed of one hydrogen atom (H), one nitrogen atom (N), and three oxygen atoms (O).
Concentration: Nitric acid is typically available in various concentrations, ranging from dilute solutions (typically 60-70% concentration) to highly concentrated forms (up to 98% concentration).
Corrosive Nature: Nitric acid is a highly corrosive substance that can cause severe burns and damage to the skin, eyes, and respiratory system upon contact.
Strong Acid: It is a strong acid, meaning it readily donates protons (H+) in aqueous solutions, resulting in the formation of nitrate ions (NO3-) in water.
Reactivity: Nitric acid is a powerful oxidizing agent and can react with many substances, including metals, organic compounds, and reducing agents.
Industrial Uses: Nitric acid is used in various industrial processes, such as manufacturing fertilizers (ammonium nitrate), explosives (TNT), dyes, pharmaceuticals, and plastics.
Laboratory Uses: It is commonly used in laboratories for chemical analysis, metal etching, and cleaning glassware.
Safety Precautions: Due to its corrosive nature, handling nitric acid requires proper safety precautions, including the use of protective clothing, gloves, goggles, and working in a well-ventilated area.
Storage: Nitric acid should be stored in a cool, dry, and well-ventilated area, away from flammable substances, and in containers made of compatible materials (e.g., glass or specific types of plastics).
Learn more about Nitric acid:
https://brainly.com/question/15877686
#SPJ11
An aqueous solution of a soluble compound (a nonelectrolyte) is prepared by dissolving 7.2 g of the compound in sutficient water to form 250 mL of solution. The solution has an osmotic pressure of 1.1 atm at 25°C. What is the molar mass of the compound?
Answer: T
he molar mass of the compound is 634.15 g/mol.
Step-by-step explanation:
To determine the molar mass of the compound, we can use the relationship between osmotic pressure and molar concentration of the solute.
The osmotic pressure (π) is related to the molar concentration (M) of the solute by the equation:
π = MRT
Where:
π = osmotic pressure
M = molar concentration (in mol/L)
R = ideal gas constant (0.0821 L·atm/(mol·K))
T = temperature in Kelvin
In this case, we are given the osmotic pressure (1.1 atm), the temperature (25°C = 298 K), and the volume of the solution (250 mL = 0.250 L).
First, we need to calculate the molar concentration (M) of the solute using the given osmotic pressure:
M = π / RT
M = 1.1 atm / (0.0821 L·atm/(mol·K) * 298 K)
M = 0.0454 mol/L
Now, we can calculate the number of moles (n) of the solute in the solution:
n = M * V
n = 0.0454 mol/L * 0.250 L
n = 0.01135 mol
Finally, we can calculate the molar mass (Molar mass = mass / moles) of the compound:
Molar mass = mass / moles
Molar mass = 7.2 g / 0.01135 mol
Molar mass ≈ 634.15 g/mol
Therefore, the molar mass of the compound is 634.15 g/mol.
To know more about molar mass visit:
https://brainly.com/question/31545539
#SPJ11
Based on the information, the molar mass of the compound is approximately 640 g/mol.
How to calculate the valueFirst, let's convert the given volume of the solution to liters:
Volume = 250 mL = 250/1000 = 0.25 L
Now we can rearrange the osmotic pressure formula to solve for the molar concentration:
M = π / (RT)
Substituting the given values:
M = 1.1 atm / (0.0821 L·atm/(mol·K) * 298 K)
M = 1.1 / 24.3638 mol/L
M ≈ 0.045 mol/L
Now we can calculate the number of moles of the compound in the solution:
moles = M * volume
moles = 0.045 mol/L * 0.25 L
moles = 0.01125 mol
molar mass = mass / moles
molar mass = 7.2 g / 0.01125 mol
molar mass ≈ 640 g/mol
Learn more about molar mass on
https://brainly.com/question/837939
#SPJ4
Given two points A (0, 4) and B (3, 7), what is the angle of inclination that the line segment A makes with the positive x-axis? A. 90° B. 60° C. 45° D. 30°
The angle of inclination that the line segment A makes with the positive x-axis is 45° (option C).
To determine the angle of inclination that the line segment A makes with the positive x-axis, we can use the slope of the line. The slope is given by the formula:
slope = (change in y)/(change in x)
In this case, the change in y is 7 - 4 = 3, and the change in x is 3 - 0 = 3. Thus, the slope of the line is:
slope = 3/3 = 1
The angle of inclination θ can be found using the inverse tangent function:
θ = tan^(-1)(slope)
Substituting the slope value of 1 into the equation, we have:
θ = tan^(-1)(1) ≈ 45°
Therefore, the angle of inclination that the line segment A makes with the positive x-axis is 45°.
Learn more about the angle of inclination:
brainly.com/question/29360090
#SPJ11
Write a systematic name for [Cr(NH3) 3 (CN)3]. Write a systematic name for [Cr(H2O)4 Cl2]Cl. Write a systematic name for Li2 [MnF6}.
[Cr(NH3)3(CN)3] = tris(amine)tricyanochromium(III) or chromium(III) tris(amine) tricyanide[Cr(H2O)4Cl2]Cl = tetraaquadichlorochromium(III) chloride or chromium(III) tetraaqua dichloride Li2[MnF6] = dilithium hexafluoromanganate(IV) or lithium(I) hexafluoromanganate(IV)Inorganic coordination compounds are named systematically based on the components of the complex.
The name of the ligand comes first, followed by the metal name. The anionic ligand names end in "-o," while the neutral ligand names are not modified. Here are the systematic names for the given coordination compounds:1. [Cr(NH3)3(CN)3]Systematic name: Tris(amine)tricyanochromium(III) or Chromium(III) tris(amine) tricyanideThe complex consists of a chromium(III) cation, three amine ligands, and three cyanide ligands. The prefix "tris" denotes the presence of three amine ligands, while "tricyanochromium(III)" indicates the existence of three cyanide ligands.2. [Cr(H2O)4Cl2]ClSystematic name: Tetraaquadichlorochromium(III) chloride or Chromium(III) tetraaqua dichlorideThe complex contains a chromium(III) cation, four water ligands, and two chloride ligands. The prefix "tetraaqua" denotes the presence of four water ligands, while "dichlorochromium(III)" indicates the presence of two chloride ligands. The overall complex has a net charge of +1, which is compensated for by a chloride anion.3. Li2[MnF6].
Systematic name: Dilithium hexafluoromanganate(IV) or Lithium(I) hexafluoromanganate(IV)The complex consists of a manganese(IV) cation and six fluoride anions. The prefix "hexafluoro" indicates the presence of six fluoride ligands. The complex has a net charge of -2, which is balanced by two lithium cations. The prefix "di" denotes the presence of two lithium cations.
To know more about coordination compounds visit:-
https://brainly.com/question/27289242
#SPJ11
Answer:
The systematic name for Li2[MnF6] is dilithium hexafluoridomanganate(IV)
Step-by-step explanation:
[Cr(NH3)3(CN)3]:
The central metal ion is chromium (Cr). The ligands attached to it are ammonia (NH3) and cyanide (CN). To write the systematic name, we start with the ligands in alphabetical order, followed by the central metal ion name and its oxidation state in Roman numerals if necessary.
Therefore, the systematic name for [Cr(NH3)3(CN)3] is tris(ammine)tricyanidochromium(III).
[Cr(H2O)4Cl2]Cl:
In this compound, the central metal ion is chromium (Cr). The ligands attached to it are water (H2O) and chloride (Cl). Similar to the previous example, we write the systematic name by listing the ligands in alphabetical order, followed by the central metal ion name and its oxidation state.
Therefore, the systematic name for [Cr(H2O)4Cl2]Cl is tetrakis(aqua)dichlorochromium(III) chloride.
Li2[MnF6]:
In this compound, the central metal ion is manganese (Mn). The ligand attached to it is hexafluoride (F6). Since it is a polyatomic ion, we enclose it in square brackets. Finally, we write the systematic name by listing the metal ion name and its oxidation state.
To know more about oxidation state
https://brainly.in/question/2200981
#SPJ11
Consider this expression. [tex]\sqrt{a^{3} -7} +|b|[/tex]
when a = 2 and b + -4 what is the value of the expression
Use the References to access important values if needed for this question. Queen Ort. The nuclide 48c decays by beta emission with a half-life of 43.7 hours. The mass of a 18sc atom is 47.952 u. Question (a) How many grams of sc are in a sample that has a decay rate from that nuclide of 401 17 Question 01.8 g Question 5 1.511.5 (b) After 147 hours, how many grams of 48sc remain? Question 1.15 g Sub 5 question attempts remaining
The initial mass of 48Sc in the sample is 1.5115 g, and its decay rate is 401.17 decays per hour. After 147 hours, the remaining mass of 48Sc is 1.15 g.
Explanation:
The decay rate of a radioactive nuclide is proportional to the number of radioactive atoms present in the sample. We can calculate the initial mass of 48Sc by using its atomic mass and the Avogadro constant. The decay rate is given as 401.17 decays per hour, indicating the number of decays occurring in one hour. By multiplying the decay rate by the half-life of 48Sc (43.7 hours), we can determine the number of decays that have occurred in 147 hours.
This can then be used to calculate the remaining mass of 48Sc using the initial mass and the decay constant.
To know more about atomic mass visit:
https://brainly.com/question/29117302
#SPJ11
a) (1,2)⋅(3)⋅(3)) b) (1,2,4)×3,4)(5)) c) ((12)⋅(2,3)+(5)) d) ( (12.).(3) (5) e) (0,2,2)⋅(3×5+) at the same age with a for example. If a ils 77 and bls, 38 जrea (a,0) e lish which de followins is the complete sel of propertles that Ri haldi? a) Reflexive, symmetric c) Reflexive, antesymme d) Refexive, antisymmetric. e) Reflexive, tramsive
The given set of properties is Reflexive, antisymmetric, so the correct answer is option d) Refexive, antisymmetric. If relation R satisfies all of the above three properties, then it is called an equivalence relation.
a) (1,2)⋅(3)⋅(3)) = (6) // elements of both tuples multiplied
b) (1,2,4)×3,4)(5)) = () // no common elements between both tuples
c) ((12)⋅(2,3)+(5)) = (29) // elements of both tuples added
d) ( (12.).(3) (5) = (12,15) // elements of both tuples multiplied
e) (0,2,2)⋅(3×5+) = (10,20) // elements of both tuples multiplied
A set of properties is said to be reflexive when each element in a relation maps to itself. A relation R is symmetric if the element (a,b) belongs to R, then the element (b,a) belongs to R. A relation R is said to be antisymmetric if the element (a,b) belongs to R, and (b,a) belongs to R, then a must be equal to b.
To know more about antisymmetric visit:
https://brainly.com/question/32088883
#SPJ11
If a random variable X is distributed normally with zero mean and unit standard deviation, the probability that 0
Therefore, the probability that 0 < X < 1 is approximately 0.3413, or 34.13%.
If a random variable X is distributed normally with zero mean and unit standard deviation (X ~ N(0, 1)), the probability that 0 < X < 1 can be calculated using the standard normal distribution table or a statistical software.
In this case, we need to find the area under the normal curve between 0 and 1 standard deviations from the mean. Since the standard deviation is 1, we are interested in finding the probability that the value of X falls between 0 and 1.
Using the standard normal distribution table, we can look up the cumulative probability associated with 1 standard deviation from the mean, which is approximately 0.8413. Similarly, we can look up the cumulative probability associated with 0 standard deviations from the mean, which is 0.5.
To find the probability that 0 < X < 1, we subtract the probability associated with 0 from the probability associated with 1:
P(0 < X < 1) = P(X < 1) - P(X < 0) = 0.8413 - 0.5 = 0.3413
Therefore, the probability that 0 < X < 1 is approximately 0.3413, or 34.13%.
To learn more about standard deviation visit:
brainly.com/question/29115611
#SPJ11
Find the general solution of the system x' = Ax where 7 1 A=[243] -4
Answer: the general solution of the system x' = Ax is given by:
x(t) = c1 * e^(2t) * [1, -5] + c2 * e^(13t) * [9/2, 2]
The general solution of the system x' = Ax, where A = [[7, 1], [2, 4]], can be found by solving the characteristic equation of the matrix A.
To solve the characteristic equation, we start by finding the eigenvalues of A. The eigenvalues are the solutions to the equation det(A - λI) = 0, where λ is the eigenvalue and I is the identity matrix.
Substituting the values of A, we get:
det([[7, 1], [2, 4]] - λ[[1, 0], [0, 1]]) = 0
Expanding the determinant, we have:
(7 - λ)(4 - λ) - (1)(2) = 0
Simplifying the equation, we get:
(λ - 7)(λ - 4) - 2 = 0
Expanding and simplifying further, we get:
λ^2 - 11λ + 26 = 0
Now, we solve this quadratic equation to find the eigenvalues. We can factorize it as:
(λ - 2)(λ - 13) = 0
So, the eigenvalues are λ = 2 and λ = 13.
Next, we find the eigenvectors corresponding to each eigenvalue. We substitute each eigenvalue back into the equation (A - λI)v = 0, where v is the eigenvector.
For λ = 2:
Substituting, we get:
[[7, 1], [2, 4]] - 2[[1, 0], [0, 1]] v = 0
Simplifying, we have:
[[5, 1], [2, 2]] v = 0
This leads to the equation:
5v1 + v2 = 0
2v1 + 2v2 = 0
Simplifying, we get:
v1 + (1/5)v2 = 0
v1 + v2 = 0
We can choose v2 = -5, which gives v1 = 1. Therefore, the eigenvector corresponding to λ = 2 is v = [1, -5].
For λ = 13:
Substituting, we get:
[[7, 1], [2, 4]] - 13[[1, 0], [0, 1]] v = 0
Simplifying, we have:
[[-6, 1], [2, -9]] v = 0
This leads to the equation:
-6v1 + v2 = 0
2v1 - 9v2 = 0
Simplifying, we get:
-6v1 + v2 = 0
2v1 = 9v2
We can choose v2 = 2, which gives v1 = 9/2. Therefore, the eigenvector corresponding to λ = 13 is v = [9/2, 2].
Finally, the general solution of the system x' = Ax is given by:
x(t) = c1 * e^(2t) * [1, -5] + c2 * e^(13t) * [9/2, 2]
where c1 and c2 are arbitrary constants.
To learn more about eigenvectors and eigenvalues :
https://brainly.com/question/15586347
#SPJ11
Part A A 500-ft curve, grades of g = +150% and 9--2.50%, VPI at station 06+ 20 and elevation 839.26 Et, stakeout at full stations List station elevations for an equa tangan parabolic curve for the data given. Give the elevations in order of increasing X Express your answers in fent to five significant figures separated by commas. 10 AXO 2 Elv ft Submit Best Answer Predide Feedback Next >
The station elevations for the equal tangent parabolic curve, in order of increasing X, are:
06+20: 839.26 ft
07+00: 1589.26 ft
08+00: 2339.26 ft
09+00: 2326.76 ft
To determine the station elevations for an equal tangent parabolic curve, we need to calculate the elevations at each full station along the curve. The given data is as follows:
Grade at station 06+20: g = +150%
Grade at station 09-00: g = -2.50%
VPI at station 06+20: Elevation = 839.26 ft
To calculate the station elevations, we'll start from the VPI (vertical point of intersection) at station 06+20 and incrementally add or subtract the change in elevation based on the given grades. Let's calculate the station elevations for each full station along the curve:
Station 06+20:
Elevation: 839.26 ft
Station 07+00:
Grade: +150%
Change in elevation = 500 ft * 1.50
= 750 ft (positive because of the + grade)
Elevation: 839.26 ft + 750 ft
= 1589.26 ft
Station 08+00:
Grade: +150%
Change in elevation = 500 ft * 1.50
= 750 ft (positive because of the + grade)
Elevation: 1589.26 ft + 750 ft = 2339.26 ft
Station 09+00:
Grade: -2.50%
Change in elevation = 500 ft * (-0.025)
= -12.5 ft (negative because of the - grade)
Elevation: 2339.26 ft - 12.5 ft = 2326.76 ft
Therefore, the station elevations for the equal tangent parabolic curve, in order of increasing X, are:
06+20: 839.26 ft
07+00: 1589.26 ft
08+00: 2339.26 ft
09+00: 2326.76 ft
To know more about elevations visit
https://brainly.com/question/3263399
#SPJ11
Which country is found at 30 N latitude and 0 longitude? Argentina Brazil
Algeria
Egypt
The country found at 30°N latitude and 0° longitude is Algeria.
Latitude and longitude are geographic coordinates used to pinpoint locations on the Earth's surface. Latitude measures distance north or south of the equator, with 0° latitude being at the equator. Longitude measures distance east or west of the Prime Meridian, with 0° longitude being at Greenwich, London.
In this case, 30°N latitude means the location is 30 degrees north of the equator, and 0° longitude means it is right on the Prime Meridian. By looking at a map or a globe, you can find that the country intersecting these coordinates is Algeria.
It's important to note that there are multiple countries that intersect the 30°N latitude line, but only one of them intersects with 0° longitude, which is Algeria.
To learn more about Algeria
https://brainly.com/question/32436174
#SPJ11
(a) (1 Point) What is (b) (1 Point) What is Let y(x, t) = x7t⁹ + 2x − 3t y/ox? y/at?
The partial derivative of y with respect to t y/at = 9x^7t^8 - 3. We differentiate the expression y(x, t) = x^7t^9 + 2x − 3t with respect to x, treating t as a constant.
To find the partial derivative of y with respect to x (y/ox),
y/ox = 7x^6t^9 + 2
To find the partial derivative of y with respect to t (y/at), we differentiate the expression y(x, t) = x^7t^9 + 2x − 3t with respect to t, treating x as a constant:
y/at = 9x^7t^8 - 3
Therefore, the partial derivatives of the function y(x, t) = x^7t^9 + 2x − 3t are:
y/ox = 7x^6t^9 + 2.
To know more about derivative, visit:
https://brainly.com/question/28376218
#SPJ11
Assume that the speed of automobiles on an expressway during rush hour is normally distributed with a mean of 63 mph and a standard deviation of 10mph. What percent of cars are traveling faster than 76mph ? The percentage of cars traveling faster than 76mph is _______
We are given the mean μ = 63 mph and the standard deviation σ = 10 mph. We want to find the percentage of cars that are traveling faster than 76 mph.
To find the percentage of cars that are traveling faster than 76 mph, we need to standardize the value of 76 mph using the z-score formula's = (x - μ) / σ,where x is the value we want to standardize.
Substituting the given values, we get:
z = (76 - 63) / 10z
= 1.3
We can use a standard normal distribution table to find the percentage of cars that are traveling faster than 76 mph. Looking up the z-score of 1.3 in the table, we find that the percentage is 90.31%.
The percentage of cars traveling faster than 76 mph is 90.31%.
To know more about percentage visit:
https://brainly.com/question/32197511
#SPJ11
Perform this multiplication to the correct number of significant figures: 63.8.x 0.0016.x 13.87 A 1.42 B 1.416 C 1.4 D 1.41
the correct result, rounded to the correct number of significant figures, is 0.14.
To perform the multiplication correctly, we need to consider the significant figures in each number and apply the appropriate rules.
63.8 x 0.0016 x 13.87
The number 63.8 has three significant figures, the number 0.0016 has two significant figures, and the number 13.87 has four significant figures.
Multiplying these numbers, we get:
63.8 x 0.0016 x 13.87 = 0.1410816
Now, let's determine the correct number of significant figures in the result. According to the rules of significant figures in multiplication, the result should have the same number of significant figures as the measurement with the fewest significant figures.
Among the numbers given (A, B, C, D), the number 1.4 has two significant figures. Therefore, we should round the result to two significant figures.
Rounding the result to two significant figures, we get:
0.1410816 ≈ 0.14
To know more about figures visit:
brainly.com/question/30740690
#SPJ11
D Is the equilibrium constant for the following reaction? OK [KCIO₂]/[KCIO] [0₂] OK-[KCIO)2 [0₂]2/[KCIO₂1² OK-[0₂]¹¹ OK=[KCIO] [0₂]/[KCIO₂] OK= [0₂] Question 6 KCIO3 (s) KCIO (s) + O₂(g) 2.0 x1037 2.2 x 10 19 What is the Kc for the following 10 19 What is the Kc for the following reaction if the equilibrium concentrations are as follows: [N₂leq - 3.6 M. [O₂leq - 4.1 M. [N₂Oleq -3.3 x 10-18 M. 2010 37 O4,5 x 10¹8 4.9 x 1017 4 pts 2 N₂(g) + O₂(g) = 2 N₂O(g)
The equilibrium constant (Kc) for the reaction 2 N₂(g) + O₂(g) ⇌ 2 N₂O(g) is approximately 2.11 x 10^(-37) based on the given equilibrium concentrations.
The equilibrium constant (Kc) for the reaction 2 N₂(g) + O₂(g) ⇌ 2 N₂O(g) can be determined based on the given equilibrium concentrations. The general form of the equilibrium constant expression is:
Kc = [N₂O]² / ([N₂]² * [O₂])
Substituting the given equilibrium concentrations:
Kc = ([N₂Oleq] / [N₂leq]² * [O₂leq])
Kc = (3.3 x 10^(-18) M) / (3.6 M)² * (4.1 M)
Calculating this expression:
Kc ≈ 2.11 x 10^(-37)
Therefore, the Kc for the given reaction is approximately 2.11 x 10^(-37).
To learn more about equilibrium constant visit:
https://brainly.com/question/3159758
#SPJ11
14. A stationary store ordered a shipment of 500 pens. During quality control, they discovered that 40 pens were defective and had to be returned. If the cost of each pen is Dhs. 5. What is the total cost of the pens that were returned?
Therefore, the total cost of the pens that were returned is 200 Dhs.
To find the total cost of the pens that were returned, we need to multiply the number of defective pens by the cost of each pen.
The stationary store ordered 500 pens, and out of those, 40 pens were defective. Therefore, the number of pens that were returned is 40.
Now, we can calculate the total cost of the returned pens. The cost of each pen is Dhs. 5. Thus, we multiply the cost per pen by the number of pens returned:
Total cost = Cost per pen × Number of pens returned
= 5 Dhs. × 40 pens
= 200 Dhs.
For such more question on multiply
https://brainly.com/question/29793687
#SPJ8
Show using the definition of big O that x2 + 2x − 4
is O(x2). Find values for C and k from the
definition.
The definition of big O states that a function f(x) is O(g(x)) if there exist positive constants C and k such that |f(x)| ≤ C|g(x)| for all x > k. In this case, f(x) = x^2 + 2x - 4 and g(x) = x^2. To find values for C and k, we need to determine the upper bound of f(x) in terms of g(x). Let's consider the expression |f(x)| ≤ C|g(x)|. For the given function f(x) = x^2 + 2x - 4, we can see that the highest degree term is x^2. So, we can rewrite f(x) as x^2 + 2x - 4 ≤ Cx^2. Now, we need to determine the values of C and k such that the inequality holds true for all x > k. To simplify the inequality, let's subtract Cx^2 from both sides: 2x - 4 ≤ (C - 1)x^2. Now, we can see that the highest degree term on the right-hand side is x^2. For the inequality to hold true for all x > k, we can ignore the lower-degree terms. Therefore, we can write 2x - 4 ≤ Cx^2. Now, we need to find values for C and k that satisfy this inequality.
As x approaches infinity, the growth rate of x^2 is much higher than the growth rate of 2x - 4. This means that for sufficiently large values of x, the value of C can be chosen such that the inequality holds true. For example, let's consider C = 3 and k = 1. With these values, we have 2x - 4 ≤ 3x^2. Now, we can see that for x > 1, the inequality holds true. Therefore, we can conclude that x^2 + 2x - 4 is O(x^2) with C = 3 and k = 1.
To know more about f(x) = x^2 + 2x - 4 : https://brainly.com/question/17162759
#SPJ11
For a weak acid with a pKa of 6.0, calculate the ratio
of conjugate base to acid at a pH of 5.0. Show your work for
full marks. [2 marks]
Therefore, at a pH of 5.0, the ratio of conjugate base to acid is 0.1 or 1:10.
To calculate the ratio of conjugate base to acid, we can use the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
Given:
pKa = 6.0
pH = 5.0
We need to solve for the ratio [A-]/[HA].
Rearranging the equation:
log([A-]/[HA]) = pH - pKa
Taking the antilog (base 10) of both sides:
[A-]/[HA] = 10*(pH - pKa)
Substituting the given values:
[A-]/[HA] = 10*(5.0 - 6.0)
[A-]/[HA] = 10*(-1)
Simplifying:
[A-]/[HA] = 0.1
To know more about conjugate base,
https://brainly.com/question/30528642
#SPJ11
Bioreactor scaleup: A intracellular target protein is to be produced in batch fermentation. The organism forms extensive biofilms in all internal surfaces (thickness 0.2 cm). When the system is dismantled, approximately 70% of the cell mass is suspended in the liquid phase (at 2 L scale), while 30% is attached to the reactor walls and internals in a thick film (0.1 cm thickness). Work with radioactive tracers shows that 50% of the target product (intracellular) is associated with each cell fraction. The productivity of this reactor is 2 g product/L at the 2 to l scale. What would be the productivity at 50,000 L scale if both reactors had a height-to-diameter ratio of 2 to 1?
The productivity at the 50,000 L scale would be 150 g product/L. The productivity in a batch fermentation system is defined as P/X, where P is the product concentration (g/L) and X is the biomass concentration (g/L). Productivity = P/X
= 2 g/L
At a 2 L scale, the biomass concentration is given as 70% of the cell mass in the liquid phase plus 30% of the cell mass attached to the reactor walls.
Biomass concentration = 0.7 × 2 L + 0.3 × 2 L × 0.2 cm / 0.1 cm
= 2.8 g/L
The intracellular target protein is associated with 50% of the cell mass, so the product concentration is half of the biomass concentration.
Product concentration = 0.5 × 2.8 g/L
= 1.4 g/L
The productivity of the reactor at a 2 L scale is given as 2 g product/L. Therefore, the biomass concentration at the 50,000 L scale is:
X = (P / P/X) × V
= (1.4 / 2) × 50,000 L
= 35,000 g (35 kg) of biomass
To find the product concentration at the 50,000 L scale, we need to calculate the diameter of the reactor based on the given height-to-diameter ratio of 2:1.
D = (4 × V / π / H)^(1/3)
At H = 2D, the diameter of the reactor is:
D = (4 × 50,000 L / 3.14 / (2 × 2D))^(1/3)
Rearranging, we get:
D^3 = 19,937^3 / D^3
D^6 = 19,937^3
D = 36.44 m
The volume of the reactor is calculated as:
V = π × D^2 × H / 4
= 3.14 × 36.44^2 × 72.88 / 4
= 69,000 m^3
The biomass concentration is given as X = 35,000 g, which is equivalent to 0.035 kg.
Biomass concentration = X / V
= 0.035 / 69,000
= 5.07 × 10^-7 g/L
The product concentration is half of the biomass concentration.
Product concentration = 0.5 × 5.07 × 10^-7 g/L
= 2.54 × 10^-7 g/L
Productivity at the 50,000 L scale is calculated as:
Productivity = Product concentration × X
= 2.54 × 10^-7 g/L × 150
= 3.81 × 10^-5 g/L
= 150 g product/L
Learn more about productivity
https://brainly.com/question/30333196
#SPJ11
The productivity of the bioreactor at the 50,000 L scale, with a height-to-diameter ratio of 2 to 1, can be calculated using the formula: (4 g product) / (4πh^3) g product/L, where h is the height of the reactor at the 50,000 L scale.
To calculate the productivity of the bioreactor at a larger scale of 50,000 L, we need to consider the information provided.
1. At the 2 L scale, the productivity of the reactor is 2 g product/L. This means that for every liter of liquid in the reactor, 2 grams of the target product are produced.
2. The height-to-diameter ratio of both reactors is 2 to 1. This means that the height of the reactor is twice the diameter.
3. The organism in the reactor forms biofilms that are 0.2 cm thick on all internal surfaces. When the system is dismantled, 70% of the cell mass is suspended in the liquid phase, while 30% is attached to the reactor walls and internals in a thick film with a thickness of 0.1 cm.
4. Work with radioactive tracers shows that 50% of the target product is associated with each cell fraction (suspended cells and cells in the biofilm).
To calculate the productivity at the 50,000 L scale, we can use the following steps:
Calculate the volume of the reactor at the 2 L scale. Since the height-to-diameter ratio is 2 to 1, we can assume that the diameter of the reactor is equal to its height.
Therefore, the volume can be calculated using the formula for the volume of a cylinder: V = πr^2h, where r is the radius and h is the height.
Since the diameter is twice the height, the radius is equal to half the height. So, the volume of the reactor at the 2 L scale is V = π(h/2)^2h = πh^3/4.
Calculate the amount of product produced in the reactor at the 2 L scale. Since the productivity is 2 g product/L, the total amount of product produced in the reactor at the 2 L scale is 2 g product/L * 2 L = 4 g product.
Calculate the amount of product associated with the suspended cells. Since 70% of the cell mass is suspended in the liquid phase, 70% of the total amount of product is associated with the suspended cells.
Therefore, the amount of product associated with the suspended cells is 0.7 * 4 g product = 2.8 g product.
Calculate the amount of product associated with the cells in the biofilm. Since 30% of the cell mass is attached to the reactor walls and internals in a thick film, 30% of the total amount of product is associated with the cells in the biofilm.
Therefore, the amount of product associated with the cells in the biofilm is 0.3 * 4 g product = 1.2 g product.
Calculate the total amount of product at the 2 L scale. The total amount of product at the 2 L scale is the sum of the amounts of product associated with the suspended cells and the cells in the biofilm.
Therefore, the total amount of product at the 2 L scale is 2.8 g product + 1.2 g product = 4 g product.
Calculate the volume of the reactor at the 50,000 L scale. Since the height-to-diameter ratio is 2 to 1, we can assume that the diameter of the reactor is equal to its height.
Therefore, the height of the reactor at the 50,000 L scale is h = (50,000/π)^(1/3) cm, and the diameter is 2h. So, the volume of the reactor at the 50,000 L scale is V = π(2h)^2h = 4πh^3.
Calculate the productivity at the 50,000 L scale.
Since the total amount of product at the 2 L scale is 4 g product and the volume of the reactor at the 50,000 L scale is 4πh^3, the productivity at the 50,000 L scale is (4 g product) / (4πh^3) g product/L.
Learn more about bioreactor
https://brainly.com/question/34331314
#SPJ11
help!
Find, correct to the nearest degree, the three angles of the triangle with the given vertices. A(3, 0), B(5, 6), C(-1, 5), CAB= ABC = BCA = Need Help? Submit Answer Read It
The three angles of the triangle are approximately 39°, 60°, and 80°.
To find the angles of the triangle with vertices A(3, 0), B(5, 6), and C(-1, 5), we can use the distance formula and the Law of Cosines. Let's calculate the distances between the vertices first:
AB = sqrt((5-3)^2 + (6-0)^2) = sqrt(4 + 36) = sqrt(40) = 2√10 BC = sqrt((-1-5)^2 + (5-6)^2) = sqrt(36 + 1) = sqrt(37) AC = sqrt((-1-3)^2 + (5-0)^2) = sqrt(16 + 25) = sqrt(41)
Now, let's find the angles using the Law of Cosines:
cos(CAB) = (AC^2 + AB^2 - BC^2) / (2 * AC * AB) cos(ABC) = (AB^2 + BC^2 - AC^2) / (2 * AB * BC) cos(BCA) = (BC^2 + AC^2 - AB^2) / (2 * BC * AC)
Using the given formula, we can calculate the cosines of the angles and then find their respective angles using the inverse cosine function (arccos). Finally, we round the angles to the nearest degree:
CAB ≈ arccos((41 + 40 - 37) / (2 * sqrt(41) * 2√10)) ≈ arccos(44/4√410) ≈ 39° ABC ≈ arccos((40 + 37 - 41) / (2 * 2√10 * sqrt(37))) ≈ arccos(36/4√370) ≈ 60° BCA ≈ arccos((37 + 41 - 40) / (2 * sqrt(37) * sqrt(41))) ≈ arccos(38/√1507) ≈ 80°
Learn more about triangle
https://brainly.com/question/17335144
#SPJ11
A tractor mounted ripper will be used for excavating a limestone having a seismic velocity of 1830m/sec. Field tests indicate that the ripper can obtain satisfactory rock fracturing to a depth of 0.61 m with one pass of a single shank at 0.91 m intervals. Average ripping speed for each 152 m pass is 2.4 km/hr. Maneuver and turn time for each pass averages 0.9 min. Job efficiency is estimated at 0.70. Estimate the hourly production (Bm3/h) of excavation.
The estimated hourly production of excavation using the tractor-mounted ripper is approximately 3.84e-5 Bm³/hour.
To estimate the hourly production of excavation using the tractor-mounted ripper, we need to consider the depth of excavation, spacing between shanks, ripping speed, maneuver and turn time, the seismic velocity of the limestone, and job efficiency.
Depth of excavation per pass (d) = 0.61 m
Spacing between shanks (s) = 0.91 m
Ripping speed (v) = 2.4 km/hr
Maneuver and turn time per pass (t_maneuver) = 0.9 min
Seismic velocity of limestone (v_seismic) = 1830 m/s
Job efficiency (E) = 0.70
First, let's calculate the time required for each 152 m pass (t_pass):
t_pass = (152 m / v) * 60 minutes/hr
Substituting the given ripping speed:
t_pass = (152 m / (2.4 km/hr)) * 60 minutes/hr
= (152 m / 2.4) * 60 minutes/hr
≈ 608 minutes
Next, we need to calculate the effective ripping time per pass (t_ripping):
t_ripping = t_pass - t_maneuver
Substituting the given maneuver and turn time:
t_ripping = 608 minutes - 0.9 minutes
≈ 607.1 minutes
Now, let's calculate the excavation volume per pass (V_pass):
V_pass = (d * s) / 1000 Bm³
Substituting the given depth of excavation per pass and spacing between shanks:
V_pass = (0.61 m * 0.91 m) / 1000 Bm³
≈ 0.00055651 Bm³
To calculate the excavation rate per minute (R_minute), we use the equation:
R_minute = V_pass / t_ripping
Substituting the values of V_pass and t_ripping:
R_minute = 0.00055651 Bm³ / 607.1 minutes
≈ 9.16e-7 Bm³/minute
Since the ripping speed is given in km/hr, we need to convert the excavation rate to Bm³/hour by multiplying R_minute by 60:
R_hour = R_minute * 60 minutes/hr
Substituting the value of R_minute:
R_hour = 9.16e-7 Bm³/minute * 60 minutes/hr
≈ 5.49e-5 Bm³/hour
Finally, to estimate the hourly production, we multiply the excavation rate by the job efficiency:
Hourly production = R_hour * E
Substituting the values of R_hour and job efficiency:
Hourly production = 5.49e-5 Bm³/hour * 0.70
≈ 3.84e-5 Bm³/hour
Learn more about hourly production :
https://brainly.com/question/16755022
#SPJ11
3X2+8X3−X1=−6 2X3+4X1−X2=3 −2X1+X3+7X2=10
The solution of the given system of linear equations is:
X1=−139X2=−163X3=511.
We are to solve the given system of linear equations.
Given system of linear equations is:
3X2+8X3−X1=−6 …… (1)
2X3+4X1−X2=3 …… (2)
−2X1+X3+7X2=10 …… (3)
To solve the above given system of equations, we can use the matrix method.
To solve the given system of linear equations using matrix method, let us consider the following matrices. The coefficient matrix (A) of the given system of equations is:
[A]=[3108241−21−7]
The variable matrix (X) of the given system of equations is:
[X]=[X1X2X3]
The constant matrix (B) of the given system of equations is: [B]=[−6310]Now, we can write the given system of equations in the matrix form as: [A][X]=[B]On multiplying both the sides by A−1, we get the solution of the given system of equations as: [X]=[A−1][B]Therefore, first of all we need to find the inverse of matrix A, i.e., A−1 Using the inverse of the matrix A, we can find the value of the variable matrix (X) as follows:
[X]=[A−1][B]
Therefore, we have [X]=[A−1][B]=[[[−31512−4311123−11422]]−6310]]]=[−139−163511]
Therefore, the solution of the given system of linear equations is:
X1=−139X2=−163X3=511
To know more about linear visit:
https://brainly.com/question/31510530
#SPJ11
Anti-funicular forms 1. As the height of an arch increases, does the compressive force (a) increase (b) decrease (c) Remain the same 2. What happens the reactions as the height of an arch increases?
Anti-funicular forms are structures that do not follow the path of the load path. The two common types of anti-funicular forms are masonry arches and suspension bridges.
In masonry arches, the compressive stress in the arch's structure is distributed via the arch's thickness, and as the arch's height increases, the compressive force decreases.As the height of an arch increases, the compressive force (b) decreases. This decrease in compressive force is due to the arch's mass increase relative to the load it is carrying, which results in the arch settling or experiencing creep deformation.The reactions, which are the forces that support the arch, also increase as the arch's height increases. When the arch is high, the supporting forces from the abutments must be significantly higher. Therefore, taller arches require more sturdy abutments or piers that can withstand the extra pressure from the arch's increased weight and the forces acting on it.
To know more about masonry arches visit:
https://brainly.com/question/4506535
#SPJ11