35.0 l of an ideal gas at 268 k and 5.16 atm are heated to 343 k with a new pressure of 8.00 atm. what is the new volume (in l)? 2 8 . 9

When potassium chloride (KCl) is dissolved in water, it produces both potassium (K+) and chloride (Cl-) ions. Therefore, the correct answer is K+ &  Cl-.

When KCl is dissolved in water, the ions K+ and Cl- are produced. The molecular formula for potassium chloride is KCl. It's a salt that is made up of two ions: potassium ions (K+) and chloride ions (Cl-). When the salt is put into water, the ions dissociate, causing the salt to dissolve.

Water is a polar molecule, which means it has a positive and negative end. When KCl is put in water, the negatively charged chlorine atoms are drawn to the positive end of the water molecule, and the positively charged potassium atoms are drawn to the negative end.

As a result, the salt dissolves completely, producing the K+ and Cl- ions in the solution. Thus, the correct answer is ions K+ and Cl-.

To know more about KCl, refer here:

https://brainly.com/question/23614978#

#SPJ11

Answer: Out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Explanation:

Diamagnetism and Paramagnetism are two of the types of magnetism that exist in nature. Diamagnetism arises from a material's electrons' orbital motion in conjunction with one another, causing the magnetic field to cancel.

Diamagnetic materials have a weak, negative magnetic susceptibility, and they experience a repulsive force when in a magnetic field.Paramagnetic materials have a positive magnetic susceptibility, and they get weakly magnetized when exposed to a magnetic field.

The paramagnetism in these materials results from the presence of unpaired electrons in their orbitals.

Therefore, out of the given species, the diamagnetic species are: Si, Ba2+ as they have all their electrons paired in their orbitals, so there are no unpaired electrons to get attracted by an external magnetic field.

Learn more about diamagnetism here:

https://brainly.com/question/15462756#

#SPJ11

Number of moles of H+ ions = 2 x 0.048 moles = 0.096 moles. Therefore, 16 ml of 3.0 M sulfuric acid solution contains 0.096 moles of H+ ions.

Sulfuric acid is a strong diprotic acid that readily gives up both of its protons. Assuming it completely dissociates. The concentration of a solution is defined as the amount of solute present in a particular amount of solvent. Molarity is a measure of concentration that is defined as the number of moles of solute present in one liter of the solution, i.e. mol/L.So, the given sulfuric acid solution has a concentration of 3.0 M.

It means that in every liter of the solution, there are 3.0 moles of sulfuric acid. To find out how many moles of H+ ions are present in 16 ml of 3.0 M sulfuric acid solution, we can follow these steps: 1. Convert the volume of the solution from milliliters to liters.1 ml = 1/1000 L16 ml = 16/1000 L = 0.016 L2. Calculate the number of moles of sulfuric acid present in 16 ml of 3.0 M sulfuric acid solution.

Number of moles = Molarity x Volume in liters Number of moles of H2SO4 = 3.0 M x 0.016 L = 0.048 moles3. Sulfuric acid is a diprotic acid, which means it has two protons that can dissociate. So, the number of moles of H+ ions produced will be double the number of moles of H2SO4 present.

Know more about Sulfuric acid here:

https://brainly.com/question/30039513

#SPJ11

The compound(s) that can be used at high concentrations to dampen out electrostatic interactions among amino acid residues are usually small neutral molecules such as glycerol, acetic acid, and ethylene glycol.

Electrostatic interactions between amino acid residues are often stabilized by hydrogen bonds and other covalent interactions. These interactions are sensitive to the surrounding environment and can be disrupted or dampened when exposed to compounds at high concentrations. Small neutral molecules, such as glycerol, acetic acid, and ethylene glycol, can effectively dampen out electrostatic interactions between amino acid residues, allowing them to retain their native conformation.

To know more about electrostatic interactions click on below link :

https://brainly.com/question/29158172#

#SPJ11

The molecular formula of the carbohydrate is C12H20O10.

The molecular formula of this carbohydrate can be determined by calculating the molecular mass of the compound.

The molecular mass of the compound is calculated using the following equation: Molecular mass = %C x 12 + %H x 1 + %O x 16.

In this case, we can calculate the molecular mass of the compound to be approximately 180 amu.

Since the molecular mass of the carbohydrate is between 140 and 160 amu, the molecular formula of the compound is C12H20O10.

This molecular formula consists of 12 carbon atoms, 20 hydrogen atoms, and 10 oxygen atoms.

The mass percentages of these elements match the molecular formula of the carbohydrate: 40.0 % carbon, 6.71 % hydrogen, and 53.3 % oxygen.

To conclude, the molecular formula of the carbohydrate is C12H20O10. This is calculated by first determining the molecular mass of the compound, then dividing the mass of each element by the molecular mass of the compound.

The molecular mass of the compound is calculated by multiplying the mass percentage of each element by the molar mass of each element.

In this case, the molecular mass of the compound is between 140 and 160 amu, so the molecular formula of the carbohydrate is C12H20O10.

to know more about carbohydrate  refer here:

https://brainly.com/question/29775112#

#SPJ11

This herd of cattle released 8.44 metric tons of methane (CH4) into the atmosphere. Methane is composed of one atom of carbon and four atoms of hydrogen, so this 8.44 metric tons of methane contained (8,440 kg) x (12.01/16.05) g/kg = 6,309 kg (6.31 metric tons).

To answer the given question, we need to know the molecular formula of methane, which is CH4. The atomic mass of carbon is 12.01 g/mol and the atomic mass of hydrogen is 1.01 g/mol. Therefore, the molecular mass of methane is:

Molecular mass of CH4 = (1 x 12.01) + (4 x 1.01) = 16.05 g/mol
Now, we need to convert the amount of methane released into metric tons.
1 metric ton = 1,000 kg
8.44 metric tons = 8.44 x 1,000 = 8,440 kg

To convert the mass of methane into mass of carbon, we need to use the ratio of the molecular masses of carbon and methane.

1 mol of CH4 contains 1 mol of carbon
1 mol of CH4 has a mass of 16.05 g
1 mol of carbon has a mass of 12.01 g

Therefore,
16.05 g of CH4 contains 12.01 g of carbon
1 kg of CH4 contains (12.01/16.05) g of carbon

To convert the mass of methane into mass of carbon, we need to multiply it by the ratio of the molecular masses of carbon and methane.
Mass of carbon = (8,440 kg) x (12.01/16.05) g/kg
= 6,309 kg

Therefore, the herd of cattle released 6,309 kg (or 6.31 metric tons) of carbon into the atmosphere through the release of 8.44 metric tons of methane.

For more questions related to metric tons.

https://brainly.com/question/4062096

#SPJ11

Manganese (Mn) is a chemical element with the symbol Mn and atomic number 25. It is a transition metal that is essential for bone growth, among other things. The mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is to be calculated.

The atomic mass of manganese is 54.94 g/mol, which means that 1 mol of manganese weighs 54.94 g. Since 1 kg equals 1000 g, the number of moles of manganese in 1 kg of bone is determined by dividing 1000 g by 54.94 g/mol.18.20 moles of manganese can be obtained by solving this equation as follows:1000 g ÷ 54.94 g/mol = 18.20 molIt is known that there are 6.02 x 10^23 atoms in 1 mole of any element.

Multiply the number of moles by Avogadro's number to obtain the number of atoms:18.20 mol x 6.02 x 10^23 atoms/mol = 1.096 x 10^25 atomsIn the bone, there are 1.096 x 10^25 manganese atoms. Because we want to determine the mass of 3.22 x 10^20 Mn atoms.

we must first convert the number of atoms into moles.1.796 x 10^-6 moles can be obtained by dividing 3.22 x 10^20 atoms by Avogadro's number:3.22 x 10^20 atoms ÷ 6.02 x 10^23 atoms/mol = 1.796 x 10^-6 mol Finally, we must convert this number of moles to grams.

Multiply the number of moles by the atomic mass to obtain the number of grams: 1.796 x 10^-6 mol x 54.94 g/mol = 9.88 x 10^-5 gThe mass in grams of 3.22 x 10^20 Mn atoms, the number found in 1 kg of bone, is 9.88 x 10^-5 g.

To know more about Manganese refer here:

https://brainly.com/question/29743410#

#SPJ11

The percent yield for this reaction is 74.81%.

Divide the actual yield of 4.29 g by the theoretical yield of 5.78 g and then multiply by 100.

4.29 g/5.78 g x 100 = 74.81%

The percent yield is the measurement of how much of the expected product was actually produced in the reaction.

It is calculated by dividing the actual yield of a given reaction by the theoretical yield and then multiplying by 100.

The actual yield is the amount of product actually produced in a reaction, while the theoretical yield is the maximum amount of product that can be produced.

The percent yield helps to determine how efficient a reaction is and how successful it was.

When the actual yield is lower than the theoretical yield, it indicates that the reaction has not been completed fully.

This can be due to a variety of factors, such as not enough reactants or the wrong temperature or pressure being used.

The percent yield can be used to compare different reactions and identify which one is the most efficient and successful. It can also be used to improve reaction conditions and make them more efficient.

Overall, the percent yield of a reaction helps to provide valuable information about the efficiency of the reaction and can be used to improve it.

Knowing the percent yield can help ensure that the most optimal results are achieved in the reaction.

to know more about percent yield refer here:

https://brainly.com/question/17042787#

#SPJ11

The activation energy for a forward reaction is not the same as the activation energy for the reverse of the same reaction. It is because of the reason that activation energy is the energy needed for a reaction to occur.

The energy barrier for a forward reaction is distinct from the energy barrier for a backward reaction. The energy required to break bonds in the reactants is known as activation energy.

Only those molecules with sufficient kinetic energy can overcome the activation energy barrier and form new products. The energy that must be overcome in order to transform reactants into products is referred to as activation energy. If the activation energy for a reaction is lower, the reaction will proceed more quickly than if it were higher.

The activation energy of a forward reaction is not the same as the activation energy of a reverse reaction since the energy requirements for each reaction are unique.

To learn more about activation energy refer - https://brainly.com/question/13565255

#SPJ11

There are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

To find out how many atoms are in 0.30 moles of sulfur dioxide (SO2), we need to first determine the number of molecules and then find out the total number of atoms.

A mole is a unit that represents 6.022 x 10^23 entities (atoms, molecules, ions, etc.) of a substance. This number is called Avogadro's number.

Determine the number of SO2 molecules in 0.30 moles:

Calculate the total number of atoms in the SO2 molecules:

Each molecule of sulfur dioxide (SO2) consists of one sulfur atom and two oxygen atoms. Thus, there are three atoms per SO2 molecule.

So, there are approximately 5.418 x 10^23 atoms in 0.30 moles of sulfur dioxide (SO2) gas.

Read more about atoms here:

https://brainly.com/question/17545314

#SPJ1

For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.

Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol

of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.

For more similar questions on topic stoichiometric combustion

brainly.com/question/14077954

#SPJ11

Iodine-131 is a radioactive isotope with a half life of 8 days. radioactive decay is a first order reaction. the initial concentration of i-131 is 0.1802 m. The concentration of iodine-131 after 31.0 days is 0.0113 m.

Radioactive decay is the procedure by which unstable atomic nuclei lose energy by emitting particles or radiation. This transformation of a radioactive nucleus into a more stable one typically involves the emission of one or more particles or photons. The products of radioactive decay are atoms of one or more various elements, known as radiogenic isotopes, that have chemical characteristics distinct from those of the original radioactive material. Let's now address the question.

The concentration of iodine-131 after 31.0 days can be calculated using the half-life of the isotope and the initial concentration. The concentration of I-131 can be determined using the following formula:

Nf = N0 (1/2)^(t/T1/2)

Where: Nf = final concentrationN0 = initial concentration, t = time elapsedT1/2 = half-life of the isotope

Given values are as follows:

Initial concentration N0 = 0.1802 m

Half-life T1/2 = 8 days

Elapsed time t = 31.0 days

Using the formula,

Nf = N0 (1/2)^(t/T1/2)

Nf = 0.1802 m (1/2)^(31.0/8)

Nf = 0.0113 m

Therefore, the concentration of iodine-131 after 31.0 days is 0.0113 m.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11

The given statement that "the color of a basic dye is in the positive ion, and the color of an acidic dye is in the negative ion" is: true.

Basic Dye: It is a type of dye that is cationic in nature. It contains the positive ion, which is responsible for the color. It works best for staining acidic components in the sample.

As it contains a positive ion, it attracts the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.

Acidic Dye: Acidic Dye is anionic in nature, meaning that it contains a negative ion that is responsible for color. It works best for staining basic components in the sample.

As it contains a negative ion, it repels the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.

Therefore, it can be concluded that the given statement is true.

To know more about Acidic Dye refer here:

https://brainly.com/question/30902645#

#SPJ11

Answer : The organic product of the reaction of ethanol and chromium(VI) is an alkoxide anion. The alkoxide anion can be used in a variety of reactions as a nucleophile.

The organic product of this redox reaction is an alkoxide. An alkoxide is an anion formed by the reaction of an alcohol with a metal or other basic compound. In this case, the alcohol used is ethanol and the metal ion is chromium(VI). The reaction involves the reduction of chromium(VI) to chromium(III).

The chromium(VI) acts as an oxidizing agent and is reduced, while the ethanol is oxidized, forming an alkoxide. In the reaction, the chromium(VI) is reduced to chromium(III), and the ethanol is oxidized, forming an alkoxide anion. The reaction can be represented by the following equation:  Cr(VI) + 2C2H5OH → Cr(III) + 2C2H5O–

The ethanol is oxidized to form an alkoxide anion, which is the organic product of the reaction. The alkoxide can then be used as a nucleophile in a variety of reactions.

Know more about ethanol here:

https://brainly.com/question/25002448

#SPJ11

Answer:

The boiling point of water depends on the pressure exerted on its surface. At standard atmospheric pressure, which is about 101.3 kPa, water boils at 100°C (212°F).

However, in this case, the pressure on the surface of water is 30 kPa, which is lower than standard atmospheric pressure. As the pressure decreases, the boiling point of water also decreases.

To determine the boiling point of water at 30 kPa, we can use a steam table or a phase diagram of water. According to a steam table, at 30 kPa, the boiling point of water is approximately 35.3°C (95.5°F).

Therefore, if the pressure on the surface of the water is 30 kPa, the water will boil at approximately 30°C

The amount of water remaining after the reaction of a 5.50-g sample of CaO is reacted with 5.31 g of [tex]H_{2}O[/tex] is complete is 3.546 g.

From the case above, we are given the reaction:  

CaO + [tex]H_{2}O[/tex] → [tex]Ca(OH)_{2}[/tex]  

To solve this question, we can use the law of conservation of mass. This states that the total mass before and after a chemical reaction is equal.

The equation is

v = m ÷ M

v(CaO) = m ÷ M

= 5.5 g ÷ 56 g/mol

= 0.098 mol

v([tex]H_{2}O[/tex]) = 5.31 g ÷18 g/mol

= 0.295 mol

According to the equation:

v(CaO) : n([tex]H_{2}O[/tex])) = 1 : 1

CaO reacts completely, (tex]H_{2}O[/tex]) is in excess.

0.098 mol H2O reacts with CaO.

v([tex]H_{2}O[/tex]) = 0.295 - 0.098 = 0.197 mol of water will remain after the reaction is complete.

m([tex]H_{2}O[/tex]) = 0.197mol * 18g/mol = 3.546 g

Thus, the amount of water remaining after the reaction is complete is 3.546 g.

For more information about law of conservation of mass refers to the link: https://brainly.com/question/28711001

#SPJ11

(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.

(b) There would be 6 slices of pie left over.

From item 6, we know that there are 50 cups of hot chocolate to be served.

Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.

Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.

To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.

Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices

Number of slices used to serve the hot chocolate = 50 slices

Therefore, the number of slices of pie left over would be:

56 slices - 50 slices = 6 slices

Learn more about pieces of pie here: https://brainly.com/question/11694372

#SPJ1

The correct answer is: the movement of a large number of potassium ions out of the cell causes the repolarization phase of the action potential. (It was not listed among the options)

During the depolarization phase, sodium ions move into the cell, causing the membrane potential to become more positive. During the repolarization phase, potassium ions move out of the cell, causing the membrane potential to become more negative again.

This movement of potassium ions out of the cell is what restores the resting membrane potential and prepares the cell for the next action potential.

Learn more about action potential:https://brainly.com/question/30634467

#SPJ1

The mass in g of sucrose required to make 250 ml of 12.5% (w/v) sucrose solution is: 31.25 g

To calculate the mass of sucrose required to make 250 mL of a 12.5% (w/v) sucrose solution, we need to use the formula

mass of solute (g) = (desired %)(volume of solution (mL))/100.

In this case, the mass of sucrose is equal to (12.5)(250 mL)/100 = 31.25 g.

To explain the calculation further, the term "w/v" indicates the weight-to-volume ratio of the solution, meaning 12.5 g of sucrose per 100 mL of solution.

To calculate the mass of sucrose needed for 250 mL of the solution, you must multiply the desired percentage of 12.5 by the desired volume of the solution of 250 mL and then divide by 100. This gives us 31.25 g, which is the answer to one decimal place.

To know more about sucrose refer here:

https://brainly.com/question/29186350#

#SPJ11

The pH of a solution is 3.94 (option 2).

The pH of a solution that is 0.410 m in HOCI and 0.050 m in NaOCI can be determined by the following steps. The equation for the ionization of HOCI is given as follows:

HOCI + H2O ↔ H3O+ + OCI-The acid dissociation constant, Ka for the above equation is 1.2 × 10-8. We assume that the reaction is at equilibrium.

The equilibrium expression for the given equation is given below:Ka = [H3O+][OCI-]/ [HOCI]Initially, the concentration of HOCI and NaOCI is the same. Therefore, [HOCI] = 0.410 M and [OCI-] = 0.050 M.

The HClO is the acid and the ClO is the base. HClO is converted into ClO-.Consequently, the initial [H3O+] = 0 and the initial [ClO-] = 0. The equilibrium concentration of [H3O+] will be equal to [ClO-].

Let x be the change in concentration for H3O+ and OCI-. Therefore, we can write the expression for equilibrium concentrations as follows: [HOCI] = 0.410 - x [OCI-] = 0.050 - x [H3O+] = x [ClO-] = x

The equilibrium expression can be written as follows:Ka = [x][x]/ [0.410 - x] [0.050 - x]Ka = x²/ [0.410 - x] [0.050 - x]We can simplify the above equation by ignoring the x terms as it is less than 5% of the initial concentration.

Therefore, x = [H3O+] = [ClO-] = 1.95 × 10-3Thus, the pH of the solution can be determined as follows:pH = -log[H3O+]pH = -log[1.95 × 10-3]pH = 2.71Thus, the correct option is 2. 3.94.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

Explaination :

Negative ion -

Electrons may be taken out of or added to an atom with far more ease than protons or neutrons. The process of adding or removing electrons from an atom results in the formation of ions. An atom obtains one electron and becomes an anion when the number of electrons in the atom is greater than the number of protons.

A cation is a positively charged ion that resulted from electron loss; these ions have fewer electrons than protons. Atoms do this to increase their energy stability by filling their outer electron shell.

The negatively charged ions that balance the net positive charge from metal ions such as k, na, and ca2 are anions.

The most abundant anion outside the cell is Chloride (Cl-) and it neutralizes sodium ions (Na+) most often.

Chloride (Cl-) is one of the major anions in the extracellular fluid, responsible for maintaining the osmotic balance and electrical neutrality of the extracellular fluid.

Sodium ions (Na+) are one of the most common positively charged metal ions, that are balanced by negatively charged ions like Cl-.

Chloride ions are important in the body for helping maintain the acid-base balance in the body and regulating the pH of the blood.

They are also involved in the production of stomach acid by the parietal cells in the stomach.

To know more about the negative ion https://brainly.com/question/11829359

#SPJ11

Answer: In summary, a primary amine should show between one and three signals in the IR spectrum between 3350 cm-1 and 3500 cm-1.

The exact number of signals depends on the structure and chemical environment of the molecule.

The infrared (IR) spectrum of a primary amine should show signals between 3350 cm-1 and 3500 cm-1, with the exact number depending on the structure and chemical environment of the molecule. Generally, primary amines should exhibit signals at 3300 cm-1, 3350 cm-1, 3420 cm-1 and 3500 cm-1. These signals correspond to the stretching vibrations of the N-H bond, C-N bond, C-H bond and the N-H out of plane bend, respectively.

To determine the number of signals expected between 3350 cm-1 and 3500 cm-1, one needs to consider the structure and environment of the molecule in question. In an unmodified primary amine, a total of two signals should be seen, namely the C-H bond at 3350 cm-1 and the N-H out of plane bend at 3500 cm-1.

However, if the primary amine has a ring structure or is part of a larger, more complex molecule, additional signals may appear, including the C-N bond at 3420 cm-1.

In summary, a primary amine should show between one and three signals in the IR spectrum between 3350 cm-1 and 3500 cm-1. The exact number of signals depends on the structure and chemical environment of the molecule.

Learn more about signals on spectrums here:

https://brainly.com/question/30509950#


#SPJ11

The final pressure and temperature are 1.131 atm and (0.9786 mol/ 0.8546 mol).

A chemical equation serves as a metaphor for the transformation of reactants into products. Iron sulfide, for instance, is created when iron (Fe) and sulfur (S) mix (FeS). Fe(s) + S(s) = FeS (s) Iron reacts with sulfur, as indicated by the + sign.

For the complete combustion of butane, the following chemical equation is balanced:

2C4H10 + 13O2 → 8CO2 + 10H2O

mass of butane = (number of moles of butane) x (molar mass of butane)

= (number of moles of oxygen) x (molar mass of oxygen)

= (mass of oxygen) / (molar mass of oxygen) x (molar mass of butane)

The mass of oxygen can be calculated from the ideal gas law:

PV = nRT

n = PV / RT

The amount of moles of oxygen can be determined using this equation with P = 1 atm, V = 5 L, and T = 500 K:

n = (1 atm) x (5 L) / [(0.08206 L atm mol⁻¹ K⁻¹) x (500 K)]

= 0.1222 mol

The mass of butane is:

mass of butane = (0.1222 mol) x (58.12 g/mol)

= 7.11 g

Before the reaction, there were n = 0.1222 mol (butane) + (13/2) x 0.1222 mol moles of gas in the vessel (oxygen)

= 0.8546 mol

The balanced equation:

n = (8/2) x 0.1222 mol (carbon dioxide) + (10/2) x 0.1222 mol (water vapor)

= 0.9786 mol

Solving for P2, we get:

P2 = (n2 / n1) x (T1 / T2) x P1

= (0.9786 mol / 0.8546 mol) x (500 K / T2) x (1 atm)

= 1.131 atm

Solving for T2, we get:

T2 = (n2 / n1) x (P1 / P2) x T1

= (0.9786 mol / 0.8546 mol)

To know more about final pressure visit:-

https://brainly.com/question/30862968

#SPJ1

Question:

A vessel contains a stoichiometric mixture of butane and air. The vessel is at a temperature of 500 K, a pressure of 1 atm, and has a volume of 5 L. If the reaction goes to completion, what volume of gas will be present in the vessel after the reaction and what will be the final pressure and temperature? Assume ideal gas behavior and that the reaction occurs with complete combustion.

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of photosynthetic organisms like cyanobacteria releasing oxygen as a byproduct of their metabolism.

The oxygen levels in the atmosphere were very low until about 2 billion years ago because of the lack of oxygenic photosynthesis. The first known oxygen-producing organisms were cyanobacteria, which appeared around 2.3 billion years ago.

Cyanobacteria was the first organism that could perform photosynthesis and release oxygen into the atmosphere as a by-product. They converted the Earth's anaerobic atmosphere into an oxygen-rich environment. The oxygenation event occurred over several hundred million years, transforming the Earth's atmosphere from oxygen-poor to oxygen-rich.

Anaerobic bacteria thrived in the planet's atmosphere because the available oxygen was scarce. The lack of oxygenic photosynthesis resulted in low levels of oxygen in the Earth's atmosphere. However, oxygenic photosynthesis by cyanobacteria increased the levels of oxygen in the atmosphere.

The planet's atmospheric composition is currently around 78 percent nitrogen, 21 percent oxygen, and a few other trace gases.

To know more about photosynthetic organisms, refer here:

https://brainly.com/question/5870637

#SPJ11

The correct answer for the alkane that is a liquid at room temperature is C₆H₁₄, also known as hexane.

Hexane is a hydrocarbon composed of six carbon atoms and fourteen hydrogen atoms. Its molecular weight is 86.178 g/mol, and it has a boiling point of 68.7°C (155.7°F).

Due to its moderately long hydrocarbon chain, it has intermolecular forces greater than the lower alkanes like CH₄ and C₃H₈ and so is not gas like CH₄ and C₃H₈.

On the other hand, in comparison to C₂₁H₄₄ and C₁₁H₂₄, C₆H₁₄ has a weak intermolecular force and therefore it is a liquid rather than solids like the former.

Hexane is insoluble in water but soluble in organic solvents, such as benzene, chloroform, and ether. Hexane is a colorless, volatile, and flammable liquid with a pungent odor.

So, other given compounds are either gases or solids at room temperature.

Therefore,  C₆H₁₄, also known as hexane is a thick liquid at room temperature.

To know more about  hexane, refer here:

https://brainly.com/question/30908383#

#SPJ11

Answer:

factor = 5.5 3 sig figs = 5.50

The pressure will: decrease by the same factor

Explanation:

24.2/4.40

The volume will increase by a factor of 5.5.

The ideal gas law states that;

PV = nRT,

where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature expressed in kelvin (K).

However, in this case, the temperature is constant, which means that we can simplify the formula to

PV = constant

or

V₁P₁ = V₂P₂

where V₁ is the initial volume, P₁ is the initial pressure, V₂ is the final volume, and P₂ is the final pressure.

Since the pressure is constant in this case, the equation becomes

V₁ = V₂ (when P is constant).

Therefore, the volume increased by a factor of:

V₂/V₁ = 24.2 L/4.40 L = 5.5 times.

To learn more about the volume of a gas refer -https://brainly.com/question/28961686

#SPJ11

Answer: In the movie Dark Waters, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by the chemical company DuPont.

Explanation: In the movie Dark Waters, the call from the Kigers is the key moment that sets off the plot. The Kigers, who are farmers in West Virginia, call Robert Bilott, a corporate defense attorney, and ask for his help in investigating the strange deaths of their cattle. Bilott is reluctant to take on the case at first, but he eventually agrees to visit the Kigers' farm and see the situation for himself.

During his visit, Bilott discovers that the Kigers are just one of many families in the area who have experienced unexplained deaths and illnesses among their livestock, as well as health problems among their own family members. Bilott begins to suspect that the cause of these health issues is pollution from a nearby chemical plant owned by DuPont, a multinational chemical company.

Bilott takes on the case and begins a long and difficult legal battle against DuPont, uncovering evidence that the company had long known about the dangers of the chemicals it was using - specifically a substance called PFOA, which was used in the production of Teflon - but had covered up the evidence and misled regulators and the public about the risks.

In the end, the call from the Kigers is significant because it leads to the discovery of a link between unexplained cattle deaths and pollution caused by DuPont, and sets off a series of events that ultimately lead to the exposure of corporate wrongdoing and the pursuit of justice for those affected by the pollution. The Kigers' call is a catalyst for change, prompting Bilott to take action and exposing the truth about a powerful and deceitful corporation.

Hope this helps, and have a great day!

Yes, the availability of oxygen and a high energy charge are required to obtain energy from acetyl CoA in the citric acid cycle.

During the citric acid cycle, the acetyl CoA is oxidized into carbon dioxide and water, which releases a large amount of energy in the form of ATP. This process occurs in the mitochondria of eukaryotic cells and requires a continuous supply of oxygen.

The availability of oxygen is essential as it serves as the final electron acceptor in the electron transport chain, which is responsible for generating the high energy charge in the form of ATP. Without oxygen, the electron transport chain cannot function, leading to a buildup of high energy intermediates that can be harmful to the cell.

A high energy charge is required for the citric acid cycle to proceed as it requires a large amount of ATP to drive the different reactions. The energy charge is maintained by the balance between ATP production and consumption within the cell. If the energy charge drops too low, the citric acid cycle slows down, leading to a decrease in ATP production.

In summary, the availability of oxygen and a high energy charge are both essential for obtaining energy from acetyl CoA in the citric acid cycle

To learn more about here:

brainly.com/question/30470177#

#SPJ4

The total pressure in a 2 L flask that contains 5.33 g of Ne and 13.40 g of Ar at 38°C is 5.20 atm.


To calculate the total pressure, you must use the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the amount of gas (in moles), R is the gas constant, and T is temperature in Kelvin.

You must first convert the temperature from Celsius to Kelvin (38°C = 311.15 K). Next, you must convert the mass of each gas into moles (5.33 g Ne = 0.01502 mol, 13.40 g Ar = 0.2225 mol).

Finally, you can calculate the total pressure (P = (0.01502 mol Ne + 0.2225 mol Ar) * 0.08206 L atm K⁻¹ mol⁻¹ * 311.15 K/ (2 L) = 5.20 atm).

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11

"The melting of a substance at its melting point is an isothermal process" is true.

An isothermal process is a thermodynamic method in which the temperature of a substance remains constant as heat is added or removed.

A reversible expansion or contraction of a gas is the most straightforward example of an isothermal process.

When a gas expands, it does work on the surroundings, and the energy from the gas is transferred to the surroundings. An isothermal process occurs when the gas expands slowly enough that the temperature remains constant.

Here are some additional points to remember: If the pressure on a gas increases, the gas compresses and loses energy in the form of heat. An isothermal process is one in which the temperature of the gas remains constant. So, when a gas is compressed in an isothermal process, the energy lost as heat is transferred back to the gas as work.

The opposite happens during a process in which the gas expands. The energy expended in work is absorbed by the gas, and the heat lost is restored to the gas. The temperature of the gas remains constant during the process.

To know more about  Isothermal process refer here:

https://brainly.com/question/12023162#

#SPJ11