1)
2)
Types of Chemical Reaction Worksheet
A. Balance the reactions 1 to 6 and indicate which type of chemical reaction
(synthesis, decomposition, single-displacement, double- displacement or
combustion) is being represented:
3)
4)
5)
6)
―
C₂H₂ +
C₂H18 +
FeCl3 +
P+
HNO3 +
-
-
O₂ →
_0₂.
NaOH →
_ą₂ →
_H₂O + O₂ → H₂O₂
▬▬
2) Pb + FeSO,
CO₂ +
_P₂0₁
3) 2 BF, + 3 H₂O
CO₂ +
5) 2 Fe + O₂ +
H₂O
NaHCO3 → NaNO3 + H₂O + CO₂
H₂O
Fe(OH)3 +
NaCl
B. Identify the type of reaction as synthesis, decomposition,
single-replacement, double-replacement, and combustion:
1) Na,PO, + 3 KOH
→3 NaOH + K,PO,
PbSO, + Fe
- B₂0, + 6 HF
4) 2 AI + 6 HCI 2 AICI, + 3 H₂
Reaction Type:
Reaction Type:
Reaction Type:
2 H₂O2 Fe(OH),
Reaction Type:
Reaction Type:
Reaction Type:
the ele

The equation showing the fusion of Li-7 atom with a H-3 atom to form a Be-8 atom and some number of neutrons is:

Li-7 + H-3 → Be-8 + n

The neutrons produced in the fusion reaction carry away excess energy and help to stabilize the beryllium-8 nucleus that is formed. They may also go on to participate in further fusion reactions.

Some of the challenges associated with achieving nuclear fusion on Earth include the need to create and maintain the high temperatures and pressures required for fusion reactions to occur, the difficulty of confining and controlling the hot plasma that is produced, and the potential hazards associated with the release of large amounts of energy in a relatively short amount of time.

To know more about fusion,visit:

https://brainly.com/question/12701636

#SPJ1

The percent yield of the given reaction is 71.11%.

Given, Magnesium (Mg) reacts with excess nitric acid (HNO3) to produce Magnesium nitrate (Mg(NO3)2) and hydrogen gas (H2).

[tex]Mg + 2HNO3 → Mg(NO3)2 + H2[/tex]

Molar mass of Mg = 24.31 g/mol

Molar mass of HNO3 = 63.01 g/mol

Molar mass of Mg(NO3)2 = 148.31 g/mol

Molar mass of H2 = 2 g/mol

The balanced chemical equation shows that 1 mol of Mg produces 1 mol of H2 gas.

So, the amount of hydrogen gas produced = 1.7 g

Moles of Mg reacted = mass/Mr = 40/24.31 = 1.65 moles

From the stoichiometric coefficients of the balanced chemical equation, 1 mole of Mg yields 1 mole of H2.

So, moles of H2 expected = 1.65 moles

Mass of H2 expected = 1.65 moles x 2 g/mol = 3.3 g

The percent yield of a reaction is the actual yield of the product obtained divided by the theoretical yield multiplied by 100.

So, Percent yield = (actual yield / theoretical yield) x 100Actual yield = 1.7 g

Theoretical yield = 3.3 g

Therefore, the percent yield of the given reaction is 71.11%.

To know more about percent yield refer to-

brainly.com/question/17042787#
#SPJ11

Option C). The correct statement about a chemical equilibrium is that "forward and reverse reactions happen at equal rates."

What is a chemical equilibrium, A chemical equilibrium refers to a dynamic process that happens when the rate of the forward reaction is equal to the rate of the reverse reaction. In this case, the concentration of reactants and products will remain constant, and the system is said to be in chemical equilibrium.

The chemical equilibrium is represented by the following equation.   aA + bB  ↔ cC + dD

Which statement about a chemical equilibrium is correct, The statement about a chemical equilibrium that is correct is that forward and reverse reactions happen at equal rates.

This means that the concentration of products and reactants will remain constant. If the concentration of reactants and products changes, the reaction system will respond to reach the state of equilibrium.

For more such questions on chemical equilibrium

brainly.com/question/16878977

#SPJ11

A Bohr-Rutherford diagram is a simplified visual representation of the atomic structure of an element. It is named after Niels Bohr and Ernest Rutherford.

In a Bohr-Rutherford diagram, the nucleus of the atom is represented by a small circle in the center, and the electrons are shown as circles orbiting the nucleus in distinct energy levels or shells. The electrons in the innermost shell are closest to the nucleus and have the lowest energy level, while the electrons in the outermost shell have the highest energy level.

The number of electrons in each shell is determined by the element's atomic number. For example, hydrogen, which has an atomic number of 1, has one electron in its sole shell, while carbon, with an atomic number of 6, has two electrons in its inner shell and four electrons in its outer shell.

The Bohr-Rutherford diagram for fluorine (green) and hydrogen fluoride (purple) are shown.

Learn more about Bohr-Rutherford diagram here:

https://brainly.com/question/31220559

#SPJ1

The amount of nitrogen in moles (n) is [n=166.8.028.0] = 5.95714286 moles. every mole of CH4 is consumed results in the production of one mole of CO2. In 100 g of water, there are about eleven moles of hydrogen atoms.

Under a consistent pressure of 1 atm, a mole of water heated to 100°C turns into steam. [Heat of vaporisation liquid water at 100°C= 540cal/gm] is the change in entropy.

Since 1 mole or methane can completely burn to make 1 mole of carbon dioxide, we may say that mole ratio of methane can fully burn to produce 44 grammes of carbon dioxide.

To know more about atoms visit:

https://brainly.com/question/30898688

#SPJ1

Test 1 and 2 take us to the conclusion that PbCl2 and AgCl precipitate in the first test. SnCl4 and SnS2, both of which are extremely soluble, are present in greater amounts in the second.

This study takes into account the acidity. Except for Pb2+, Ag+, and Hg2+ for chlorides and Sr+2, Ba+2, Pb+2, and Hg+2 for sulfides, the chlorides and sulfides groups are largely soluble.

In the first instance, the HCl content is very high. It implies that HCl reacts with all ions. Because SnCl4 and SnS2 are both very soluble in the solution, there is no reaction in the second case. With Le Chatelier, if we add more reactive, the equilibrium leans to reactive, thus there is more SnCl4.

To know more about cation/anion test, visit,

https://brainly.com/question/21082064

#SPJ4

a. The rate expression for the forward and backward reaction can be written as:

[tex]rate = k_{forward} [A]^m [B]^n[/tex]

[tex]rate = k_{backward} [C]^p [D]^q[/tex]

b. If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left to consume the additional [tex]CO_2\\[/tex].

c. At equilibrium, the concentrations of [tex]CO_2(aq)[/tex], A, and B would be higher than their initial concentrations, while the concentrations of C and D would be lower than their initial concentrations.

a) [tex]rate = k_forward [A]^m [B]^n[/tex]

where [tex]k_{forward[/tex] is the rate constant for the forward reaction, [A] and [B] are the concentrations of the reactants, and m and n are the reaction orders with respect to [A] and [B], respectively.

[tex]rate = k_backward [C]^p [D]^q[/tex]

where [tex]k_{backward[/tex] is the rate constant for the backward reaction, [C] and [D] are the concentrations of the products, and p and q are the reaction orders with respect to [C] and [D], respectively.

b. If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left to consume the additional [tex]CO_2[/tex]. This can be justified by Le Chatelier's principle, which states that a system at equilibrium will respond to any stress applied to it in a way that tends to counteract the stress and reestablish equilibrium.

In this case, increasing the concentration of [tex]CO_2(aq)[/tex] would be a stress that would upset the equilibrium, and the system would respond by shifting the equilibrium to the left, where [tex]CO_2(aq)[/tex] is consumed.

c. At equilibrium, the rate of the forward reaction is equal to the rate of the backward reaction. Therefore, the concentrations of the species at equilibrium can be calculated using the equilibrium constant, [tex]K_{eq[/tex]:

[tex]K_{eq} = ([C]^p [D]^q) / ([A]^m [B]^n)[/tex]

where the brackets denote the concentration of each species. At equilibrium, [tex]K_{eq}[/tex] is a constant, which means that the ratio of the product concentrations to the reactant concentrations is constant.

If the concentration of [tex]CO_2(aq)[/tex] is increased, the equilibrium would shift to the left, which would decrease the concentrations of the products (C and D) and increase the concentrations of the reactants (A and B).

Therefore, at equilibrium, the concentrations of [tex]CO_2(aq)[/tex], A, and B would be higher than their initial concentrations, while the concentrations of C and D would be lower than their initial concentrations.

However, the exact concentrations of each species at equilibrium would depend on the values of [tex]K_{eq}[/tex] and the initial concentrations of each species.

For more question on rate expression click on

https://brainly.com/question/15154019

#SPJ11

The compounds are;

A - methane

B - nitrogen

C - water

A molecular model is a physical or virtual representation of a molecule, which shows the arrangement of its atoms and the nature of the chemical bonds between them.

Molecular models are used to visualize the three-dimensional structure of molecules and to understand their chemical and physical properties.

Molecular models are used in many fields of science, including chemistry, biochemistry, and materials science. They are used to study the properties and behavior of molecules in different environments and to design new molecules with specific properties for use in various applications.

Learn more about molecular models:https://brainly.com/question/30545244

#SPJ1

Answer:

Explanation:

Calcium chloride (CaCl2) dissociates into three ions in water: one Ca2+ ion and two Cl- ions.

To find the concentration of ions in the solution, we need to find the total number of moles of ions that result from dissolving 0.584 moles of CaCl2:

One mole of CaCl2 produces one mole of Ca2+ ions and two moles of Cl- ions.

Therefore, 0.584 moles of CaCl2 produces 0.584 moles of Ca2+ ions and 2 x 0.584 = 1.168 moles of Cl- ions.

Next, we need to find the total volume of the solution:

The solution is made by dissolving the CaCl2 in enough water to make 4.76 L of solution.

Therefore, the volume of the solution is 4.76 L.

Finally, we can calculate the concentration of each ion:

Concentration of Ca2+ ions: moles of Ca2+ ions / volume of solution = 0.584 mol / 4.76 L = 0.122 M

Concentration of Cl- ions: moles of Cl- ions / volume of solution = 1.168 mol / 4.76 L = 0.245 M

So the concentration of Ca2+ ions is 0.122 M and the concentration of Cl- ions is 0.245 M.

The concentration (in m) of ions, in a solution of 0.584 moles of CaCl2 dissolved in enough water to make 4.76 L of the solution is 0.245 M.

What is concentration?

Concentration refers to the amount of a substance that is dissolved in a specific quantity of solvent or solution. It is typically measured in units of moles per liter (M) or milligrams per deciliter (mg/dL).

What is CaCl2?

Calcium chloride (CaCl2) is a compound of calcium and chlorine. It is a salt that is commonly used as a drying agent, because it can absorb water from the air. It is also used in food preservation, snow and ice removal, and concrete mixing.

How to find the concentration of CaCl2 ions?

The molar mass of CaCl2 is 111 g/mol.

Number of moles of CaCl2 = mass/molar mass= 0.584 moles

Volume of the solution = 4.76 L.

The concentration of CaCl2 ions can be calculated as follows:

Concentration of CaCl2 = Number of moles of CaCl2/Volume of the solution= 0.584 moles/4.76 L= 0.1227 M

The concentration of ions, on the other hand, is calculated as twice the concentration of CaCl2 because the compound dissociates into two ions: Ca2+ and 2Cl-.

Therefore, the concentration of ions = 2 × 0.1227 M= 0.245 M.

Therefore, the concentration (in m) of ions, in a solution of 0.584 moles of CaCl2 dissolved in enough water to make 4.76 L of the solution is 0.245 M.

To know more about concentration click here:

brainly.com/question/30862330

#SPJ11

The pH of the resulting solution = 1.05

an assessment of the acidity or basicity of an item or solution. Calculations are made for pH on a range of 0 to 14. On this scale, a pH of 7 indicates neutral, which means that it is neither acidic nor basic. The pH scale ranges from greater than 7 for more basic chemicals to less than 7 for more acidic ones. You need to know the hydronium ion concentration in moles per liter to determine the pH of an aqueous solution (molarity).

Given,

Volume of NaOH V1 = 40ml

M1 = 0.04m

Volume of nitric acid V2 = 50

M2 = 0.04M

[tex]concentration ofH^{+} = [H ^{+} ]= \frac{M1V1-M2V2}{V1+V2}[/tex]

[tex]\frac{(40)(0.25)-(50)(0.04) }{40+50}[/tex]

= 10-2/90

= 8/90

pH → -log[H+}

     = [tex]Log_{10}[ \frac{8}{90}][/tex]

pH = -(-1.051)

pH = 1.05

Learn more about pH here :

https://brainly.com/question/30258439

#SPJ4

A well-organized argumentative essay will have each paragraph contain a distinct topic phrase, a logical progression of ideas and arguments, and proper citation and analysis of the supporting documentation.

The argumentative essay might be structured in one of two ways. The first strategy is to create all of your own arguments before opposing and disproving theirs. The second tactic is to take each point put out by your opponent and refute it on its own.

There are three different methods for structuring the points of an argument: the Toulmin Method, the Classical Method, and the Rogerian Way.

To learn more about argumentative essay visit:

brainly.com/question/15727685

#SPJ1

The volume occupied by a 10 g sample of nitrogen gas at 25°C and 1.0 atm pressure is 8.61 L.

To calculate the volume occupied by a 10 g sample of nitrogen gas at 25°C and 1.0 atm pressure, we need to use the ideal gas law equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of nitrogen gas present in the 10 g sample. To do this, we divide the mass by the molar mass of nitrogen:

n = m/M = 10 g / 28 g/mol = 0.357 mol

Next, we convert the temperature from Celsius to Kelvin:

T = 25°C + 273.15 = 298.15 K

Now we can plug in the values and solve for V:

V = nRT/P = (0.357 mol)(0.0821 L·atm/mol·K)(298.15 K)/(1.0 atm) = 8.61 L

For more question on pressure click on

https://brainly.com/question/24719118

#SPJ11

To calculate the pH of the buffer, we first need to find the concentration of NH4+ and NH3 in the solution.

The dissociation of NH4Cl in water is as follows:

NH4Cl → NH4+ + Cl-

Since NH4Cl is a strong electrolyte, it dissociates completely in water, and the concentration of NH4+ in solution is the same as the initial concentration of NH4Cl:

[ NH4+ ] = 0.250 M

The reaction between NH3 and water is as follows:

NH3 + H2O ⇌ NH4+ + OH-

The base dissociation constant for ammonia (Kb) is 1.8 x 10^-5. We can use this value to find the concentration of NH3 and OH- in the solution.

Let x be the concentration of NH3 in the solution. Then, the concentration of NH4+ will be 0.250 M - x (since NH4+ and NH3 are in equilibrium). The concentration of OH- can be calculated using the Kb value:

Kb = [ NH4+ ][ OH- ] / [ NH3 ]

1.8 x 10^-5 = (0.250 M - x) x / (0.250 M)

x = 0.0564 M (concentration of NH3)

[ OH- ] = Kb x / [ NH4+ ]

[ OH- ] = (1.8 x 10^-5) (0.0564 M) / (0.250 M - 0.0564 M)

[ OH- ] = 4.37 x 10^-6 M

Since this is a basic solution, the pH can be calculated using the pOH equation:

pOH = -log [ OH- ]

pOH = -log (4.37 x 10^-6)

pOH = 5.36

The pH can be found by subtracting the pOH from 14:

pH = 14 - pOH

pH = 14 - 5.36

pH = 8.64

Therefore, the pH of the buffer is 8.64.

To know more about buffer solution, visit the link given below:

https://brainly.com/question/24262133

#SPJ4

Since Q > Ksp, a precipitate forms in the mixed solution. The precipitate is calcium fluoride ([tex]CaF_{2}[/tex]).

A solution containing sodium fluoride is mixed with one containing calcium nitrate to form a solution that is 0.015 M in NaF and 0.010 M in [tex]Ca(NO_{3})_{2}[/tex]. To determine if a precipitate forms in the mixed solution, follow these steps:

1. Write the possible reaction between the ions in the solution: NaF (aq) + [tex]Ca(NO_{3})_{2}[/tex] (aq) → [tex]NaNO_{3}[/tex] (aq) + [tex]CaF_{2}[/tex] (s)

2. Identify the solubility rules for the potential products. Sodium nitrate ( [tex]NaNO_{3}[/tex]) is soluble because nitrates are generally soluble. Calcium fluoride ( [tex]CaF_{2}[/tex]) may be insoluble, as fluorides often have limited solubility.

3. Calculate the ion product (Q) and compare it with the solubility product constant (Ksp) of  [tex]CaF_{2}[/tex]. If Q > Ksp, a precipitate will form. Q = [tex][Ca_{2+}][F-]^{2}[/tex]. The concentrations of ions in the mixed solution are: [[tex]Ca_{2+}[/tex]] = 0.010 M (from [tex]Ca(NO_{3})_{2}[/tex]) [F-] = 0.015 M (from NaF)

So, Q = (0.010) × ([tex]0.015^{2}[/tex]) = 2.25 × [tex]10^{-6}[/tex] The Ksp of  [tex]CaF_{2}[/tex] is 3.9 × [tex]10^{-11}[/tex].

4. Compare Q with Ksp: Q (2.25 × [tex]10^{-6}[/tex]) is greater than Ksp (3.9 ×  [tex]10^{-11}[/tex]).

Since Q > Ksp, a precipitate forms in the mixed solution. The precipitate is calcium fluoride (  [tex]CaF_{2}[/tex]).

To know more about precipitate, refer here:

https://brainly.com/question/30904755#

#SPJ11

Answer:

Explanation:

a

The IUPAC names of the organic compounds are as follows:

The IUPAC nomenclature of organic compounds is a system of naming organic chemical compounds according to a set of rules established by the International Union of Pure and Applied Chemistry (IUPAC).

The basic rules of the IUPAC nomenclature system involve identifying the longest continuous chain of carbon atoms in the molecule (the parent chain), assigning a root name to this chain based on the number of carbon atoms, and adding prefixes or suffixes to indicate functional groups and other substituents.

Stereochemistry (the arrangement of atoms in three-dimensional space) is also taken into account when naming compounds.

Learn more about organic compounds at: https://brainly.com/question/802962

#SPJ1

The only additional step required in the calculation of pH for a weak base solution is the calculation of the concentration of hydroxide ions using the Kb value.

The equilibrium expression for the dissociation of a weak base, B, can be written as:

B + H₂O ⇌ BH+ + OH-

The equilibrium constant for this reaction is called the base dissociation constant, Kb. Like the acid dissociation constant, Ka, the Kb can be used to calculate the concentration of hydroxide ions in the solution.

The relationship between the Kb and the Ka of the conjugate acid of the weak base can be expressed as:

Kw = Ka × Kb

where Kw is the ion product constant for water, which is equal to 1.0 x 10⁻¹⁴ at 25°C.

By using the Kb value and the initial concentration of the weak base, the concentration of OH- can be calculated. Then, the pH of the solution can be determined using the same equation as for a weak acid:

[tex]pH= pKa + log(\frac{[A-]}{[HA]} )[/tex]

where A- is the conjugate base of the weak acid, and HA is the weak acid itself.

To know more about the Acid, here

https://brainly.com/question/28134210

#SPJ4

A chemistry student weighs out of acrylic acid into a volumetric flask, The weight of the acrylic acid the student weighed out, The concentration of the acrylic acid solution after dilution, The concentration of the titrant solution

To calculate the volume of the titrant solution needed for the titration, we need some additional information, such as:
1. The weight of the acrylic acid the student weighed out
2. The concentration of the acrylic acid solution after dilution
3. The concentration of the titrant solution
Once you have this information, follow these steps:
Step 1: Calculate the moles of acrylic acid in the solution.
- Moles = (weight of acrylic acid) / (molar mass of acrylic acid)
Step 2: Calculate the concentration of the diluted acrylic acid solution.
- Concentration = (moles of acrylic acid) / (total volume of the solution)
Step 3: Use the stoichiometry of the reaction between the acrylic acid and the titrant to determine the moles of titrant needed to neutralize the acid.
Step 4: Calculate the volume of the titrant solution needed for titration.
- Volume of titrant = (moles of titrant) / (concentration of titrant solution)
Remember to convert the volume of titrant to the appropriate units, such as milliliters or liters, depending on the question's requirements.

For more such questions on acrylic acid

brainly.com/question/13807060

#SPJ11

Wide melting point range: Impure sample

Narrow melting point range : Pure sample

A wide melting point range is known as the range of more than 5°C  which usually indicates that the substance is impure.  A narrow melting point range is known as the range of 0.5 to 2°C which usually indicates that the substance is fairly pure. It explains the impurities effect on the Melting Point. A wide melting point is used as a indicator of purity as there is a general lowering and broadening of the melting range as impurities increase.

A narrow melting point range is defined as the range which suggests a pure sample with one compound when a wide melting point range suggests an impure sample with multiple compounds. Through the wide melting point and narrow melting point range observation of a sample it can provide an indication of whether the sample is pure or impure with multiple compounds present.

To learn more about wide melting point range

https://brainly.com/question/29222755

#SPJ4

The process involves burning coal is used to make nearly half of the electricity in the United States.

By burning coal in a boiler to make steam, coal-fired power plants produce electricity. Under tremendous pressure, the produced steam enters a turbine, which spins a generator to generate electricity. The steam is then cooled, dense back into the water, and got back to the kettle to begin the interaction once again.

At the moment, coal provides the majority of the world's electricity. The primary source remains for many nations.

Fossil fuel power plants generate heat by burning oil or coal, which is then used to create steam that powers turbines that generate electricity.

To learn more about coal here

https://brainly.com/question/30560160

#SPJ4

#SPJ4

Full Question

an unknown compound has the formula . you burn 0.2236 g of the compound and isolate 0.5459 g of and 0.2235 g of . what is the empirical formula of the

The volume (ml) of HCl solution at pH 1.52 that can be neutralized with a given amount of CaCO₃ is 17.87 mL

We want to determine the volume of HCl that can be neutralized with a given amount of CaCO₃.

First we will write the chemical equation for the reaction i.e.

2HCl + CaCO₃ → CaCl2 + CO2 + H2O

This means that now 1 mole of CaCO₃, 2 moles of HCl are needed to neutralize.

Mass = 27.0 mg = 0.027 g Using the formula,

mol = mass / molar mass

∴ CaCO₃ mol present =

CaCO₃ mol present = 0.00026977 mol

Since 2 mol HCl is required, 2 mol HCl 70 mol CaCO₃ must be neutralized 20. of CaCO₃ 444 0.00053954 mol HCl

∴ CaCO₃ needs to be neutralized 0.00053954 mol HCl Now for the volume of HCl solution at pH 1.

52 required.

We will first determine the HCl concentration = 10^(-1.52)

[H⁺] = 0.

0302 M

∴ HCl concentration 0.0302 M

Now, for the volume using the formula,

Volume = mol/concentration

Required HCl Volume = 0.01787 L

Hence, the volume in milliliters (mL) of an HCl solution with a pH of 1.52 that can be neutralized by the given CaCO₃ is 17.87 mL.

To know more about neutralization, visit,

https://brainly.com/question/1934578

#SPJ4

The statement that is not true is: d. Evaporation preferentially releases ions such as Na and K into the atmosphere. Seawater is not simply concentrated river water because it undergoes various processes that modify its composition.

Explanation: When evaporation occurs, water molecules leave the surface and enter the atmosphere, but ions like Na and K generally do not evaporate with water. Instead, these ions remain in the seawater, making it saltier.

The other three statements are true and contribute to the differences between seawater and river water:
a. Hydrothermal activity removes some ions (e.g., [tex]Mg_2^+[/tex]) and adds others (e.g., [tex]Ca_2^+[/tex]): Hydrothermal vents at the seafloor release hot fluids, which can dissolve minerals from the Earth's crust. These fluids can remove ions like [tex]Mg_2^+[/tex] from the seawater and introduce new ions, such as [tex]Ca_2^+[/tex], altering the composition of seawater.
b. Volcanic gases add components such as chloride ([tex]Cl^-[/tex]) and sulfate ([tex]SO_{4}^{2-}[/tex]): When volcanoes erupt, they release gases that can dissolve in seawater. These gases contain components like chloride and sulfate, which contribute to the salinity of seawater.
c. Biological activity such as the formation of shells removes some ions (e.g., [tex]Ca_2^+[/tex]): Marine organisms like mollusks and corals extract ions like [tex]Ca_2^+[/tex] from seawater to build their shells and skeletons. This process helps to remove these ions from the seawater, altering its composition.

for more such question on  concentrated

https://brainly.com/question/9363113

#SPJ11

The value of ΔGrxn for the given reaction is -156.74 kJ·mol-1 at 25 °C.

To calculate ΔGrxn for the given reaction, we can use the following equation:

ΔGrxn = ΣnΔfG(products) - ΣmΔfG(reactants)

where ΔfG is the standard molar Gibbs free energy of formation, n and m are the stoichiometric coefficients of the products and reactants respectively.

Let's start by writing the balanced chemical equation for the reaction:

[tex]SO_2(g) + 2 H_2(g)[/tex] → [tex]S(s) + 2 H_2O(g)[/tex]

Now we can use the given values of ΔfG to calculate ΔGrxn:

ΔGrxn = [ΔfG(S) + 2ΔfG([tex]H_2O[/tex])] - [ΔfG([tex]SO_2[/tex]) + 2ΔfG([tex]H_2[/tex])]

ΔGrxn = [0 + 2(-228.57 kJ·mol-1)] - [-300.4 kJ·mol-1 + 2(0)]

ΔGrxn = -457.14 kJ·mol-1 + 300.4 kJ·mol-1

ΔGrxn = -156.74 kJ·mol-1

For more question on ΔGrxn click on

https://brainly.com/question/31384759

#SPJ11

Answer:

30.7 grams

Explanation:

The balanced chemical equation for the reaction between sodium and chlorine gas is:

2 Na + Cl2 → 2 NaCl

The molar mass of sodium is 22.99 g/mol, and the molar mass of chlorine gas is 70.90 g/mol. Using these values, we can calculate the number of moles of each reactant:

Moles of sodium = 41.24 g / 22.99 g/mol = 1.794 mol

Moles of chlorine gas = 18.69 g / 70.90 g/mol = 0.263 mol

According to the balanced equation, the reaction uses two moles of sodium for every one mole of chlorine gas. Therefore, the limiting reactant is chlorine gas, and we can calculate the maximum amount of sodium chloride that can be formed:

Moles of NaCl = 0.263 mol Cl2 × (2 mol NaCl / 1 mol Cl2) = 0.526 mol NaCl

Convert moles of NaCl to grams:

Grams of NaCl = 0.526 mol NaCl × 58.44 g/mol = 30.7 g

The amount of sodium chloride that could potentially be formed is 30.4 grams.

To determine how many grams of sodium chloride could potentially be formed, we first need to balance the chemical equation for the reaction between sodium and chlorine gas:

2 Na + Cl2 → 2 NaCl

This equation shows that two moles of sodium react with one mole of chlorine gas to produce two moles of sodium chloride. We can use the given masses of sodium and chlorine gas to determine how many moles of each are present:

Molar mass of Na = 22.99 g/mol
Molar mass of Cl2 = 70.90 g/mol

Moles of Na = 41.24 g / 22.99 g/mol = 1.79 mol
Moles of Cl2 = 18.69 g / 70.90 g/mol = 0.26 mol

Since two moles of sodium react with one mole of chlorine gas, we can see that there is not enough chlorine gas present to react with all of the sodium. Therefore, chlorine gas is the limiting reactant in this reaction.

The amount of sodium chloride that could potentially be formed is limited by the amount of chlorine gas, so we need to calculate how many moles of sodium chloride can be formed from the available amount of chlorine gas:

Moles of NaCl = 0.26 mol Cl2 × (2 mol NaCl / 1 mol Cl2) = 0.52 mol NaCl

Finally, we can convert the moles of sodium chloride to grams using its molar mass:

Molar mass of NaCl = 58.44 g/mol

Mass of NaCl = 0.52 mol × 58.44 g/mol = 30.4 g

Therefore, the maximum amount of sodium chloride that could potentially be formed is 30.4 grams.

Learn more about the amount of sodium chloride formed here:

brainly.com/question/19949007

#SPJ11

The pH of the buffer solution is relatively stable and does not change significantly upon the addition of small amounts of acid or base.

The pH of a buffer solution is determined by the equilibrium between a weak acid and its conjugate base or a weak base and its conjugate acid.  When water is added to a buffer solution, the concentration of the buffer components does not change, and the ratio of the weak acid and its conjugate base or weak base and its conjugate acid remains constant. Therefore, the pH of the buffer solution remains unchanged.

However, the addition of large amounts of water can dilute the buffer solution and cause a slight increase in pH due to the decrease in concentration of the buffer components. This effect is more pronounced in weaker buffer solutions. Therefore, in general, the pH of a buffer solution will remain relatively stable upon the addition of small amounts of water, but may increase slightly with the addition of large amounts of water.

To know more about the Buffer, here

https://brainly.com/question/30890340

#SPJ4

The amount of oxygen diffused in 1 hour under the steady state condition through a non diffusing gas mixture of methane is 0.14076 K mole/hr.m2. This is calculated using the expression of Molar flux.

The molar flux = [tex]DA_{M}[/tex] * [tex]P_{t}[/tex]* ([tex]P_{A1}[/tex] - [tex]P_{A2}[/tex]) / [tex]RTZP_{BM}[/tex]

[tex]PB_{M}[/tex] =([tex]P_{B2}[/tex]- [tex]P_{B1}[/tex])/ ln ([tex]P_{B2}[/tex]/ [tex]P_{B1}[/tex])

[tex]P_{B2}[/tex]= 105- 13*103   = 87*103  N/m2, [tex]P_{B2}[/tex]= 105- 6500= 93.5*103 N/m2

[tex]PB_{M}[/tex]=   (87*1000- 93.5*1000)/ ln (87/93.5)= 90200 N/m2

[tex]DA_{M}[/tex]  =  Diffusivity of oxygen into mixture of  Methane and hydrogen

          =  (yCH4/[tex]DA_{B}[/tex] + yH2/[tex]DA_{C}[/tex])

Since  volume ratio of Methane to hydrogen is 2:1

y[tex]CH_{4}[/tex]= 2/3 and y[tex]H_{2}[/tex]= 1/3

[tex]DA_{B}[/tex]= 1.86*10-5 m2/sec   and [tex]DA_{C}[/tex] =  7*10-5 m2/sec

[tex]DA_{C}[/tex]= 1/ (0.667/1.86*10-5+ 0.333/7*10-5) =2.462*10-5

[tex]N_{A}[/tex] = 2.462*10-5*(13000-6500)/ 8314*273*0.002*90200

     =  3.91*10-5 K mole/m2.s

for 1  hour  NA= 3.91*10-5*3600 Kmolm2 =0.14076 K mole/hr.m2

To learn more about Molar Flux

https://brainly.com/question/23287548

#SPJ4

The correct question is,

calculate the amount of oxygen diffused in 1 hour under steady state conditions through a non-diffusing gas mixture of methane

The sulfuric acid solution has a concentration of 4.904 grams per liter (or dm3).

With the chemical formula H₂SO₄, sulfuric acid is a potent, colorless, odorless, and extremely corrosive mineral acid. It is also referred to as "vitriol oil." An extremely significant industrial chemical, sulfuric acid is used to make a variety of goods, including fertilizers, detergents, pigments, dyes, medicines, and explosives.

The formula below can be used to get the molar mass of sulfuric acid (H₂SO₄):

H₂SO₄'s molar mass is calculated as follows: 2 × (1.008 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 98.08 g/mol.

Hence, 98.08 g equals one mole of sulfuric acid.

We must multiply the molarity by the sulfuric acid's molar mass in order to translate the molarity (0.05 M) to grams per liter:

4.904 g/L = 0.05 mol/L x 98.08 g/mol

As a result, the sulfuric acid solution has a concentration of 4.904 grams per liter (or dm³).

To know more about sulphuric acid, visit:

brainly.com/question/12986533

#SPJ1

Answer:

The wavelength of the line in the spectrum of the hydrogen atom is 102.57 nm.

The line in the spectrum of the hydrogen atom that results from the electron moving from the orbital with n = 5 to the orbital with n = 2 has a wavelength of 434 nanometers (nm).

The hydrogen atom is the most fundamental form of hydrogen. There is one proton, one electron, and no neutrons in the hydrogen atom. It's the lightest element on the periodic table, and it's also the most abundant. The symbol for hydrogen is H. It is the element that is present everywhere in the cosmos.

To know more about wavelength click here:

brainly.com/question/14286925

#SPJ11